Microsoft RM-149 GSM Cellular Phone with BT User Manual Manual

Microsoft Mobile Oy GSM Cellular Phone with BT Manual

Manual

Nokia N76 User guideXXXXXXXISSUE 1 ENR1136_en.book  Page 1  Friday, March 2, 2007  9:42 AM
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-149 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nseries, N76, Navi and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.This product includes software licensed from Symbian Software Ltd (c) 1998-2007. Symbian and Symbian OS are trademarks of Symbian Ltd.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2007. Tegic Communications, Inc. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications.BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT 0434R1136_en.book  Page 2  Friday, March 2, 2007  9:42 AM
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS. Issue 1 EN, XXXXXXXR1136_en.book  Page 3  Friday, March 2, 2007  9:42 AM
ContentsFor your safety...........................................7Get connected..........................................10Support .....................................................11Nokia support and contact information....................... 11Help ....................................................................................... 11Get started............................................................................ 11Additional applications ..................................................... 11Your Nokia N76.......................................12Software updates................................................................ 12Settings.................................................................................. 12Welcome................................................................................ 12Modes..................................................................................... 12Keys and navigation...........................................................14Transfer content from another device .......................... 16Essential indicators.............................................................17Power saver LED.................................................................. 17Volume and loudspeaker control.................................... 18Keypad lock (keyguard) ..................................................... 18Headset.................................................................................. 18Memory card ........................................................................ 19File manager ........................................................................19Media applications ..................................21Music player ........................................................................ 21Visual Radio ......................................................................... 25RealPlayer ............................................................................ 27Adobe Flash Player  ............................................................ 28Nokia Lifeblog ..................................................................... 28Camera......................................................29Take pictures ........................................................................29Still image camera indicators.......................................... 30Active toolbar....................................................................... 31After taking a picture ........................................................31Still image camera settings.............................................. 32Flash........................................................................................ 33Setup settings—color and lighting................................. 33Scenes .................................................................................... 34Take pictures in a sequence.............................................34You in the picture—self-timer.........................................35Record videos....................................................................... 35Gallery .....................................................38R1136_en.book  Page 4  Friday, March 2, 2007  9:42 AM
View and browse files ........................................................38Print Basket...........................................................................40Albums....................................................................................40Free memory .........................................................................40Image print............................................................................41Print online............................................................................42Online sharing ......................................................................42Edit images............................................................................42Edit video clips .....................................................................43Slide show .............................................................................45Presentations........................................................................45Movie director......................................................................45Personalize your device .......................... 48Profiles—set tones ..............................................................48Change the look of your device  .....................................49Active standby mode..........................................................50Web browser  .......................................... 52Connection security............................................................52Bookmarks view...................................................................52Browse the web ...................................................................53End connection ....................................................................56Settings ..................................................................................57Connections............................................. 59Connection manager .........................................................59Bluetooth connectivity .....................................................59USB ........................................................................................62PC connections ....................................................................63Synchronization ..................................................................63Device manager ..................................................................63Download! ...............................................64Settings for Download!......................................................64Time management ...................................66Clock ......................................................................................66Calendar ...............................................................................66Messaging ...............................................68Text modes............................................................................69Write and send messages .................................................69Inbox—receive messages ..................................................70Mailbox .................................................................................72View messages on a SIM card.........................................73Messaging settings.............................................................74IM—instant messaging .....................................................78Make calls ................................................79Voice calls .............................................................................79Answer or decline a call....................................................81Log ..........................................................................................82R1136_en.book  Page 5  Friday, March 2, 2007  9:42 AM
Push to talk  ......................................................................... 83Contacts (phonebook) ............................85Save and edit names and numbers................................85Copy contacts ...................................................................... 86Add ringing tones for contacts ....................................... 87Create contact groups....................................................... 87Office........................................................88Calculator .............................................................................88Adobe Reader ...................................................................... 88Converter .............................................................................. 88Notes .....................................................................................89Recorder ...............................................................................89Wireless Keyboard  .............................................................89Tools..........................................................90Application manager  ........................................................ 90Digital rights management ............................................. 92Voice commands ................................................................ 93Positioning ............................................................................ 94Settings ...................................................95General .................................................................................. 95Positioning ..........................................................................100Phone ..................................................................................100Connection ........................................................................102Applications .......................................................................105Troubleshooting: Q&A ......................... 106Battery information ............................. 109Charging and discharging...............................................109Nokia battery authentication guidelines ...................109Care and maintenance ......................... 112Additional safety information............. 114Index ...................................................... 117R1136_en.book  Page 6  Friday, March 2, 2007  9:42 AM
7For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELING Do not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLY Use only in the positions as explained in the product documentation. Do not touch the antenna areas unnecessarily.QUALIFIED SERVICE Only qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCE Your device is not water-resistant. Keep it dry.BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device.R1136_en.book  Page 7  Friday, March 2, 2007  9:42 AM
8CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.About your deviceThe wireless device described in this guide is approved for use on the GSM 850, 900, 1800, and 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded. Your device supports internet connections and other methods of connectivity. Like computers, your device may be exposed to viruses, malicious messages and applications, and other harmful content. Exercise caution and open messages, accept connectivity requests, download content, and accept installations only from trustworthy sources. To increase the security of your device, consider installing, using, and regularly updating antivirus software, firewall, and other related software on your device and any connected computer. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 97, 2000, and XP). Not all file formats can be viewed or modified.During extended operation, such as a high-speed data connection, the device may feel warm. In most cases, this condition is normal. If you suspect the device is not working properly, take it to the nearest authorized service facility.Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not R1136_en.book  Page 8  Friday, March 2, 2007  9:42 AM
9affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.The images in this guide may differ from your device display.Network servicesTo use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, and e-mail require network support for these technologies.Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a AC-3, or AC-4 charger and from an AC-1, ACP-8, ACP-9, ACP-12, or LCH-12 charger when used with a CA-44 charger adapter.The battery intended for use with this device is BL-4B. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.R1136_en.book  Page 9  Friday, March 2, 2007  9:42 AM
Get connected10Get connectedUse your device on the 2G network. See ‘About your device’, p. 8.Use Bluetooth technology to transfer files and connect to compatible enhancements. See ‘Bluetooth connectivity’, p. 59.Use the Nokia AV Connector (3.5 mm) to connect to compatible headsets and headphones. See ‘Headset’, p. 18.Use a compatible data cable, for example the Nokia Connectivity Cable DKE-2, to connect to compatible devices, such as printers and PCs. See ‘USB’, p. 62.Use a compatible microSD card to transfer data or back up information. See ‘Memory card tool’, p. 19.R1136_en.book  Page 10  Friday, March 2, 2007  9:42 AM
Support11SupportModel number: Nokia N76-5Hereinafter referred to as Nokia N76.Nokia support and contact informationCheck www.nokia.com/support or your local Nokia website for the latest version of this guide, additional information, downloads, and services related to your Nokia product.On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.Help Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.When you are reading the instructions, to switch between help and the application that is open in the background, press and hold  .To open help from the main menu, select Tools > Help. Select the desired application to view its help topics.Get startedSee the get started guide for keys and parts information and instructions for setting up the device for use.Additional applicationsThere are various applications provided by Nokia and different third-party software developers to help you do more with your Nokia N76. These applications are explained in the guides that are available at the Nokia N76 product support pages at www.nokia.com/support or your local Nokia website.R1136_en.book  Page 11  Friday, March 2, 2007  9:42 AM
Your Nokia N7612Your Nokia N76Software updatesNokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application. To update the device software, you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000 or XP operating system, broadband internet access, and a compatible data cable to connect your device to the PC.To get more information and to download the Nokia Software Updater application, visit www.nokia.com/softwareupdate or your local Nokia web site.SettingsYour device normally has MMS, GPRS, streaming, and mobile internet settings automatically configured in the device, based upon your wireless service provider information. You may have settings from your service providers already installed in your device, or you may receive or request the settings from the service providers as a special message.To change the general settings in your device, such as language, the standby mode and display settings, see ‘Phone’, p. 100.WelcomeWhen you switch on your device for the first time, Welcome opens. Select from the following:Settings wizard—to configure various settings. See the additional applications leaflet.Data transfer—to transfer content, such as contacts and calendar entries, from a compatible Nokia device. See ‘Transfer content from another device’, p. 16.To open Welcome later, press  , and select Applications > Welcome. You can also access the individual applications in their own menu locations.ModesYour device has two operating modes: with the fold closed for access to particular features including Music player, Radio, Camera and Messaging, and with the fold open for R1136_en.book  Page 12  Friday, March 2, 2007  9:42 AM
Your Nokia N7613traditional mobile phone use and access to all the features on your device.Fold closed—cover displayWhen the fold is closed, the main display deactivates, and the cover display lights up. Ongoing calls end, unless the loudspeaker is in use or a compatible headset is connected. To change the settings, see ‘Cover display’ p. 50. If you are using Music player or Visual Radio to listen to a sound clip, it continues to play.With the fold closed, the cover display provides clock and status information. In the standby mode, the signal strength and battery indicators, time information, and the status indicators may be displayed.If you are using Music player to listen to a sound clip, volume bars and track information are displayed. To play, pause, or play the next or previous sound clip, use the quick cover keys. To adjust the volume, use the volume keys.If you are using Visual Radio with the fold closed, volume bars and station information are displayed. To turn the radio on or off and select the next or previous saved station, use the media keys. To adjust the volume, use the volume keys.If you are using Camera with the fold closed, hold the device in landscape. The outer display becomes the viewfinder. To activate the camera, press and hold  . To zoom in or out, press the volume keys up or down. To take a picture, press  . To switch between Image mode and Video mode, press  . To make lighting and color adjustments before taking a picture, press   to activate the toolbar, and use the volume keys to scroll through the active toolbar. See ‘Setup settings—color and lighting’, p. 33 and ‘Scenes’, p. 34.Calendar and clock alarms, notes for missed calls, and new received messages are also displayed. To view received text messages and the text and image objects of received multimedia messages, open the fold, and view the message on the main display. See ‘Inbox—receive messages’, p. 70.Incoming calls are indicated by their normal tone and a note. In the cover display settings, select Answer if fold opened to answer a call when you open the fold. If a compatible headset is connected to the device, press  . To change the settings, see ‘Cover display’, p. 50.To make calls or use the menu, open the fold.To lock the keys, see ‘Keypad lock (keyguard)’, p. 18.R1136_en.book  Page 13  Friday, March 2, 2007  9:42 AM
Your Nokia N7614Fold open—main displayWhen you open the fold, the main display lights up, the keypad is available, and you can access the menu. To access the menu, press  .The fold opens about 165 degrees, as shown in the picture. Do not force the fold to open more.Keys and navigationSee the get started guide for a complete list of all the keys and parts in your device.Menu key With the menu key, you can access the main menu. In an open application, press   to make the application run in the background. To switch between open applications, press and hold  .Navi™ scroll keyHereinafter referred to as the scroll key.Use the scroll key to move around the menus ( ,  , ,  ), and to select items ( ).Tip! When in the menus, instead of using the scroll key, you can use the number keys,  , and   to quickly access the applications. For example, in the main menu, press   to open Calendar.Multimedia key   With the multimedia key, you have quick access to multimedia content and predefined applications.To open the shortcut assigned to the multimedia key, press and hold  . To open a list of multimedia applications, press  . To open the desired application, use the scroll key. To exit the list without selecting an application, press .To change the shortcuts, press   and  . To change the applications that are shown when you press  , select Top, Left, Middle, and Right and the application.Some shortcuts may be fixed, and you are not able to change them.Edit key To copy and paste text, press and hold   to select letters and words. Press   or   to highlight text. To copy the text to clipboard, while still holding  , select Copy. To R1136_en.book  Page 14  Friday, March 2, 2007  9:42 AM
Your Nokia N7615insert the text into a document, press and hold  , and select Paste. Edit text and lists• To mark an item in a list, scroll to it, and press   and  at the same time.• To mark multiple items in a list, press and hold   while you press   or  . To end the selection, release , then release  .In Messaging, use the edit key to turn predictive text on, enter in the number mode, insert a symbol, and change the writing language. See ‘Messaging’, p. 68.Mode key The mode key is a multifunction key, allowing you to switch easily between selected applications, and change the views within certain applications when the fold is closed..With the fold open, press   to open the latest photo in Gallery.With the fold open, in Gallery, press   to switch between Images & video and thumbnail views.With the fold closed, in Camera, press   to switch between Image mode and Video mode.With the fold closed, in Music player, press   to switch between Now playing and Music library.With the fold closed, in Visual Radio, press   to switch between channel and channel list views. Tip! To only see the wallpaper on the cover display, press the mode key twice in the standby mode.Capture key Press and hold   to activate the main camera in the fold closed mode. Press   to take pictures. See ‘Take pictures’, p. 29.In Video mode, press   to record video clips. See ‘Record videos’, p. 35.Quick cover keysUse the quick cover keys ( ,  , and  ) to control playback. See ‘Music player’, p. 21, and ‘Visual Radio’,p. 25.Use the quick cover keys to lock the keypad with the fold closed. See ‘Keypad lock (keyguard)’,p. 18.Press   to activate the active toolbar when using the camera in the fold-closed mode. See ‘Active toolbar’, p. 31.Volume keysTo control the volume, see ‘Volume and loudspeaker control’, p. 18.R1136_en.book  Page 15  Friday, March 2, 2007  9:42 AM
Your Nokia N7616Use the volume keys to scroll up or down in a list in the fold-closed mode.Use the volume keys to zoom in and out when using the camera. You can also use the volume keys to scroll through the active toolbar with the fold closed. See ‘Active toolbar’, p. 31.Transfer content from another deviceYou can transfer content, such as contacts, from a compatible Nokia device to your Nokia N76 using Bluetooth connectivity. Your device notifies you if the other device is not compatible.The type of content that can be transferred depends on the model of the device from which you want to transfer content. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N76.If the other device cannot be powered on without a SIM card, you can insert your SIM card in it. When Nokia N76 is switched on without a SIM card, the offline profile is automatically activated.Transfer content1To use the application for the first time, on your Nokia N76, select it in Welcome, or press  , and select Tools > Transfer. If you have used the application before and want to start a new transfer, select Transfer data.2To have Nokia N76 search for devices with Bluetooth connectivity, select Continue. Select the device from which you want to transfer content. On your Nokia N76, enter a code (1–16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See ‘Pair devices’, p. 61.For some phone models, the transfer application is sent to the other device as a message. To install Data transfer on the other device, open the message, and follow the instructions on the display.3From your Nokia N76, select the content you want to transfer from the other device.Content is transferred from the memory of the other device to the corresponding location in your Nokia N76. Transfer time depends on the amount of data to be transferred. You can cancel the transfer and continue later.If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select Phones, scroll to the device, and select Options > Synchronise. Follow the instructions on the display.R1136_en.book  Page 16  Friday, March 2, 2007  9:42 AM
Your Nokia N7617The synchronization is two-way. If an item is deleted in one device, it is deleted in both. You cannot restore deleted items with synchronization.To view the log of a previous transfer, select Transfer log.Essential indicators The device is being used in a GSM network. You have one or more unread messages in the Inbox folder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder. You have missed calls. Shown if Ringing type is set to Silent and Message alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number. If you have two phone lines (network service), a number indicates the active line. A compatible headset is connected to the device.   indicates the connection has been lost. A compatible loopset is connected to the device. A compatible Text phone is connected to the device. A data call is active.  A GPRS packet data connection is active.   indicates the connection is on hold and   that a connection is available. A packet data connection is active in a part of the network that supports EGPRS.   indicates the connection is on hold and   that a connection is available. The icons indicate that EGPRS is available in the network, but your device is not necessarily using EGPRS in the data transfer. Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. When the indicator is blinking, your device is trying to connect with another device. A USB connection is active.Power saver LEDThe display is switched off to save battery power after the screen saver is actived. A blue LED in the bottom of the cover display blinks to indicate that the device is powered on, but in the sleep mode. R1136_en.book  Page 17  Friday, March 2, 2007  9:42 AM
Your Nokia N7618To turn the sleep mode on or off, see ‘Cover display’, p. 96.Volume and loudspeaker controlTo increase or decrease the volume level when you have an active call or are listening to a sound, press the volume keys.The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, select Options > Activate loudspeaker.To turn off the loudspeaker, select Options > Activate handset.Keypad lock (keyguard)To lock the keys with the fold closed, press  , then . To unlock the keys, press  , then  . To lock the keys with the fold open, press  , then  . To unlock the keys, press  , then  .When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.HeadsetYou can connect a compatible headset or compatible headphones to the Nokia AV Connector (3.5 mm) of your device. You may need to select the cable mode.Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV Connector.When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume levels.Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.To use a headset or headphones with a compatible remote control unit, for example, the Nokia Audio Controller AD-43, connect the unit to the connector in the device, then to the headset or headphones to the unit.R1136_en.book  Page 18  Friday, March 2, 2007  9:42 AM
Your Nokia N7619Some headsets do not include a microphone. For phone calls, use such a headset with a remote control unit or the microphone of the device.When using certain headset enhancements, for example the Nokia Audio Controller AD-43, to adjust the volume during a call, use the volume key in the device. The Nokia Audio Controller AD-43 has multimedia volume controls that are used to adjust the volume only for music or video playback.Memory cardUse only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.Keep all memory cards out of the reach of small children.Memory card tool Press  , and select Tools > Memory.To back up information from the device memory to a compatible memory card (if available), select Options > Back up phone memory. The device notifies you if the memory card does not have enough free space to create a back-up.To restore information from the compatible memory card to the device memory, select Options > Restore from card.When a memory card is reformatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Options > Format memory card. Select Yes to confirm.File manager To browse files and folders in the device memory or on a compatible memory card (if inserted), press  , and select Tools > File mgr.. The device memory view ( ) opens. Press   to open the memory card view ( ), if available.To mark several files, press and hold   while you press ,  , or  . To move or copy the files to a folder, select Options > Move to folder or Copy to folder.To find a file, select Options > Find and the memory from which to search. Enter a search text that matches the file name.R1136_en.book  Page 19  Friday, March 2, 2007  9:42 AM
Your Nokia N7620To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory.Memory low—free memoryMany features of the device use memory to store data. The device notifies you if the device or the memory card memory is low.To free device memory, transfer data to a compatible memory card (if available) or to a compatible PC.To remove data to free memory, use File manager to delete files you no longer need, or go to the respective application. For example, you can remove the following:• Messages in the folders in Messaging and retrieved e-mail messages from the mailbox• Saved web pages• Contact information•Calendar notes• Applications shown in App. manager that you do not need• Installation files (.sis) of applications you have installed to a compatible memory card; first back up the installation files to a compatible PCR1136_en.book  Page 20  Friday, March 2, 2007  9:42 AM
Media applications21Media applicationsMusic player Music player supports files formats such as AAC, eAAC, eAAC+, MP3, and WMA. Music player does not necessarily support all features of a file format or all the variations of file formats. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can listen to music with the fold open or closed. If you are listening to music when a call comes in, the music pauses when you answer the call and resumes shortly after the end of the call.For how to add songs to your device, see ‘Transfer music’, p. 23.For more information about copyright protection, see ‘Digital rights management’, p. 92.Play musicTo play music with the fold open, do the following:1Press   and select Music player.2In Music menu, select a category such as All songs or Albums.3Select the music you want to play.In Now playing, use the scroll key and the middle selection key to control playback• Press   to play or pause a song.• Press   to rewind the track or to skip backwards.• Press   to fast forward the track or to skip forward.• Press   to stop playback.To play music with the fold closed, do the following:1In standby mode, press   to enter Music menu.2Select the music you want to play, and press  .In Now playing, use the quick cover keys to control playback:• Press   to play or pause a song.When you pause a song, a list of the tracks you are currently listening to is displayed.• Press   to rewind the track or to skip backwards.• Press   to fast forward the track or to skip forward.• To switch between Now playing and Music menu, press .R1136_en.book  Page 21  Friday, March 2, 2007  9:42 AM
Media applications22Music menuTo select more music to play in Now playing when the fold is open, select Options > Go to Music menu.The music menu shows the music available in the device and compatible memory card (if inserted). All songs lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. To view playlists, select Track lists.To refresh the library after you have updated the song selection in your device, select Options > Refresh Music library.To open the view that displays the currently playing song, press and hold  .To switch between Now playing and Music menu when the fold is closed, press  . Use the quick cover and volume keys to select more music to play. Select Options to modify the basic play settings.PlaylistsTo view and manage playlists, in the music menu, select Track lists. The following playlists appear automatically: Most played tracks, Recent tracks, and Recent additions.To view details of the playlist, select Options > Track list details.Create a playlist1Select Options > Create playlist.2Enter a name for the playlist, and select OK.3Select artists to find the songs you want to include in the playlist. Press   to add items. To show the song list under an artist title, press  . To hide the song list, press .4When you have made your selections, select Done. If a compatible memory card is inserted, the playlist is saved to the memory card.To add more songs later, when viewing the playlist, select Options > Add songs.To add songs, albums, artists, genres, and composers to a playlist from the different views of the music menu, select an item and Options > Add to track list > Saved track list or New track list.To remove a song from a playlist, select Options > Remove from track list. This deletion does not delete the song from the device; it only removes it from the playlist.To reorder songs in a playlist, scroll to the song you want to move, and select Options > Reorder list. To grab songs and drop them to a new position, use the scroll key.R1136_en.book  Page 22  Friday, March 2, 2007  9:42 AM
Media applications23Music shop In the music shop (network service) you can search, browse, and purchase music for downloading to your device. The variety, availability, and appearance of music shop services may vary.You must have music shop settings and valid internet connections in order to use this service. For more details, see ‘Music shop settings’, p. 23 and ‘Access points’, p.103.Go to music shop1In the Music menu, select Options > Go to Music shop.2Select from the displayed options to search, browse, or select ringing tones.Music shop settingsThe availability and appearance of the music shop settings may vary. The settings may also be predefined and not editable.If the settings are not predefined, you may be asked to enter the following settings:Address—You must define the web address of the music shop service.Default acc. pt.—Select the access point to use when connecting to the music shop.User name—Enter your user name for the music shop.Password—Enter your password for the music shop.If User name and Password fields are left empty, you may have to enter them at login.In the music shop, you may be able to edit the settings by selecting Options > Settings.Transfer musicYou can transfer music from a compatible PC or other compatible devices using a compatible USB cable or Bluetooth connectivity. For details, see ‘Bluetooth connectivity’, p. 59.To refresh the library after you have updated the song selection in your device, in the Music menu, select Options > Refresh Music libraryThe requirements of the PC for music transfer:• Microsoft Windows XP operating system (or later)• A compatible version of Windows Media Player application. You can get more detailed information about Windows Media Player compatibility from the Nokia N76 section of the Nokia website.• Nokia Nseries PC SuiteTransfer music from PCYou can use three different methods to transfer music:R1136_en.book  Page 23  Friday, March 2, 2007  9:42 AM
Media applications24• To view your device on a compatible PC as an external hard drive where you can transfer any data files, make the connection with a compatible USB cable or Bluetooth connectivity. If you are using the USB cable, select Data transfer as the connection mode. A compatible memory card needs to be inserted in the device.• To synchronize music with Windows Media Player, connect the compatible USB cable and select Media player as the connection mode. A compatible memory card needs to be inserted in the device.• To use Nokia Music Manager in Nokia Nseries PC Suite, connect the compatible USB cable and select PC Suite as the connection mode.To change the default USB connection mode, press  , select Tools > USB > USB mode.Both Windows Media Player and Nokia Music Manager in Nokia Nseries PC Suite have been optimized for transferring music files. For information about transferring music with Nokia Music Manager, see the Nokia Nseries PC Suite user guide.Music transfer with Windows Media PlayerThe functionality of the music synchronization may vary between different versions of the Windows Media Player application. For more information, see the corresponding Windows Media Player guides and helps.Manual synchronizationAfter connecting your device with a compatible PC, Windows Media Player selects manual synchronization if there is not enough free memory in your device. With manual synchronization, you can select the songs and playlists that you want to move, copy, or remove.The first time you connect your device you must enter a name that is used as the name of your device in Windows Media Player.To transfer manual selections:1After your device is connected with Windows Media Player, select your device in the navigation pane, if more than one device is connected.2Drag the songs or albums to the list pane for synchronization. To remove songs or albums, select an item in the list, and click Remove from list.3Check that the list pane contains the files you want to synchronize and that there is enough free memory on the device. Click Start Sync. to start the synchronization.Automatic synchronizationTo change the default file transfer option in Windows Media Player, click the arrow under Sync, select your device, and click Set up Sync. Clear or select the Sync this device automatically check box.R1136_en.book  Page 24  Friday, March 2, 2007  9:42 AM
Media applications25If the Sync this device automatically check box is selected and you connect your device, the music library in your device is automatically updated based on playlists you have selected in Windows Media Player.If no playlists have been selected, the whole PC music library is selected for synchronization. Note that your PC library may contain more files that can fit to the device memory and the compatible memory card of your device. See the Windows Media Player help for more information.The playlists on your device are not synchronized with the Windows Media Player playlists.Visual Radio Press  , and select Applications > Radio. You can use the application as a traditional FM radio with automatic tuning and saved stations, or with parallel visual information related to the radio program on the display, if you tune to stations that offer Visual Radio service. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio.You can normally make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call.If you start music player when the radio is on, the radio is muted. When music playback is paused or stopped, the radio starts to play again.When the fold is closed, use the quick cover keys and the volume and mode keys to control the FM radio.Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Press  , and select Applications > Radio. To start a station search, select   or  , or press and hold the quick cover keys   or  . To change the frequency manually, select Options > Manual tuning.If you have previously saved radio stations, to go to the next or previous saved station, select   or  , or press the quick cover keys   or  .To adjust the volume, press the volume keys. R1136_en.book  Page 25  Friday, March 2, 2007  9:42 AM
Media applications26To listen to the radio using the loudspeaker, select Options > Activate loudspeaker. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.To view available stations based on location, select Options > Station directory (network service).To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options > Stations.To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background.View visual contentTo check availability and costs, and to subscribe to the service, contact your service provider. To view available visual content for a tuned station, select Options > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).When the connection to the visual service is established, the display shows the current visual content.Saved stationsTo open the list of your saved stations when the fold is open, select Options > Stations.To listen to a saved station, select Options > Station > Listen. To view available visual content for a station with Visual Radio service, select Options > Station > Start visual service.To switch between the list of your saved stations and listening to a saved station when the fold is closed, press .To change station details, select Options > Station > Edit.Tip! You can add shortcuts to saved stations in the multimedia menu. See ‘Multimedia key’, p. 14.SettingsSelect Options > Settings and from the following:Start-up tone—Select whether a tone is played when the application is started.Auto-start service—Select Yes to have the Visual Radio service start automatically when you select a saved station that offers Visual Radio service.Access point—Select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.R1136_en.book  Page 26  Friday, March 2, 2007  9:42 AM
Media applications27Current region—Select the region you are currently located in. This setting is displayed only if there was no network coverage when the application was started.RealPlayer Press  , and select Applications > RealPlayer. With RealPlayer, you can play video clips, or stream media files over the air without saving them to the device first. RealPlayer supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats.In landscape view, use the quick cover keys to control the player.Play video clips1To play a saved media file, select Options > Open and from the following:Most recent clips—to play one of the last six files played in RealPlayerSaved clip—to play a file saved in Gallery.2Scroll to a file, and press   to play the file.To adjust the volume, use the volume keys.Stream content over the airMany service providers require you to use an internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer recognizes an http link to a .ram file.To stream content over the air, select a streaming link saved in Gallery, on a web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.RealPlayer settingsYou may receive RealPlayer settings in a special message from the service provider. See ‘Data and settings’, p. 71. For more information, contact your service provider.Select Options > Settings and from the following:Video—to have RealPlayer automatically repeat video clips after they finish playingStreaming—to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.R1136_en.book  Page 27  Friday, March 2, 2007  9:42 AM
Media applications28Adobe Flash Player To view, play, and interact with compatible flash files made for mobile devices, press  , and select Applications > Flash Player. Scroll to a flash file, and press .Nokia Lifeblog To start Lifeblog on your device, press  , and select Lifeblog.Nokia Lifeblog is a combination of software for mobile phone and PC that keeps a multimedia diary of the items that you collect with your device. Nokia Lifeblog automatically keeps track of your multimedia items and organizes your photos, videos, sounds, text messages, multimedia messages, and weblog posts into a chronology that you can browse, search, share, publish, and back up.For more information on Nokia Lifeblog, see the guides for your device at www.nokia.com/support or your local Nokia website.R1136_en.book  Page 28  Friday, March 2, 2007  9:42 AM
Camera29CameraYour device has two cameras, a high-resolution camera on the back of the device (the main camera in landscape mode) and a lower resolution camera on the upper right corner of the main display (the secondary camera in portrait mode). You can use both cameras to take still pictures and record videos. Your device supports an image capture resolution of 1600x1200 pixels using the main camera. The image resolution in this guide may appear different.The images and video clips are automatically saved in the Images & video folder in Gallery. The cameras produce .jpeg images. Video clips are recorded in the MPEG-4 file format with the .mp4 file extension, or in the 3GPP file format with the .3gp file extension (sharing quality). See ‘Video settings’, p. 37.You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity. You can also upload them to your compatible online album. See ‘Online sharing’, p. 42.Take picturesWhen taking a picture, note the following:• Use both hands to keep the camera still.• The quality of a digitally zoomed picture is lower than that of a nonzoomed picture.• The camera goes into the battery saving mode if there are no keypresses for a moment. To continue taking pictures, press  .Fold-closed modeTo take a picture using the cover display as the viewfinder, do the following:1To activate the main camera, press and hold . If the camera is in Video mode, press  .2To take a picture, press . Do not move the device before the image is saved. Fold-open modeTo take a picture using the main display as the viewfinder, do the following:1Open the fold.R1136_en.book  Page 29  Friday, March 2, 2007  9:42 AM
Camera302To activate the main camera, press  . If the camera is in Video mode, select Switch to Image mode from the active toolbar. 3To take a picture, press  . Do not move the device before the image is saved.To zoom in or out, use the volume keys in your device.To make lighting and color adjustments before taking a picture, in the main display, press   or   to scroll to items on the active toolbar. In the cover display, press  to activate the toolbar, and volume keys to scroll to items. See ‘Setup settings—color and lighting’, p. 33 and ‘Scenes’, p. 34.To free memory before taking a picture, select Options > Go to free memory in the main display (only available if you have backed up images or video clips using Nokia Nseries PC Suite). See ‘Free memory’, p. 40.To activate the front camera, select Options > Use secondary camera.To leave the camera open in the background, and use other applications, press  . To return to the camera, press the capture key.Still image camera indicatorsThe still image camera viewfinder (main display) displays the following:1The current capture mode indicator.2The active toolbar, which you can scroll through before capturing the image to select different items and settings (the active toolbar is not displayed during  image capture). See ‘Active toolbar’, p. 31.3The image resolution indicator indicates whether the quality of the image is Print 2M - Large, Print 1M - Small, or MMS 0.3M - Small.4The image counter displays the estimated number of images you can capture using the current image quality setting and memory in use (the counter is not displayed during image capture).5The device memory ( ) and memory card ( ) indicators show where images are saved.R1136_en.book  Page 30  Friday, March 2, 2007  9:42 AM
Camera31Active toolbarActive toolbar provides you with shortcuts to different items and settings before and after taking a picture or recording a video.If you are using the cover display as a viewfinder, press  to display the active toolbar. Use the volume keys to scroll to the item you want. To select it, press  .If you are using the main display as a viewfinder, scroll to the item you want. To select it, press  .  The available options vary depending on the capture mode. You can also define whether the active toolbar is always visible on the display or activated by a key press.If you want the active toolbar to be visible before and after taking a picture or recording a video, select Options > Show icons. To view the active toolbar only when you need it, select Options > Hide icons. Only the capture mode indicator is shown on the display. To activate the toolbar, press  . The toolbar is visible for 5 seconds.Before taking a picture or recording a video, in the active toolbar, select from the following: to switch between the video and image modes to select the scene to select the flash mode (images only) to activate the self-timer (images only). See ‘You in the picture—self-timer’, p. 35. to activate the sequence mode (images only). See ‘Take pictures in a sequence’, p. 34. to select a color effect to adjust white balance to adjust the exposure compensation (images only) to adjust light sensitivity (images only)The icons change to reflect the current status of the setting.The available options vary depending on the capture mode and view you are in.See also active toolbar options in ‘After taking a picture’, p. 31, ‘After recording a video’, p. 36, and ‘Active toolbar’, p. 39 in Gallery.After taking a pictureAfter you take a picture, there are several things you can do with the image using the active toolbar in the main display (available only if Show captured image is set to On in the still image camera settings).• If you do not want to keep the image, select Delete.R1136_en.book  Page 31  Friday, March 2, 2007  9:42 AM
Camera32• To send the image using multimedia, e-mail, Bluetooth connectivity, or upload it to your online album, press the call key, or select Send. For more information, see ‘Messaging’, p. 68, ‘Bluetooth connectivity’, p. 59, and ‘Online sharing’, p. 42. This option is not available during an active call. You can also send the image to a call recipient during an active call. Select Send to caller (only available during an active call).• To tag images to the Print basket for later printing, select Add to Print Basket.• To print the picture, select Print. See ‘Image print’, p. 41.• To return to the viewfinder to capture a new image, press  , or select Back.To use the picture as wallpaper in the active standby, select Options > Set as wallpaper.To set the image as a call image for a contact, select Set as contact call image.Still image camera settingsThere are two kinds of settings for the still image camera: Image setup and main settings. To adjust Image setup, see ‘Setup settings—color and lighting’, p. 33. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Image quality— Print 2M - Large (1600x1200 resolution), Print 1M - Small (1152x864 resolution) or MMS 0.3M - Small (640x480 resolution) If you want to print the image, select Print 2M - Large. If you want to send it through e-mail, select Print 1M - Small. To send the image through MMS, select MMS 0.3M - Small.These resolutions are only available in the main camera. In the secondary camera, the resolution is always MMS 0.3M - Small.Add to album—Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens.Show captured image—Select Yes if you want to see the captured image after it is taken, or No if you want to continue taking pictures immediately.Default image name—Define the default name for the captured images.Extended digital zoom (main camera only)—Select On to allow the zoom increments to be smooth and continuous between digital and extended digital zoom. If you want to limit the zoom to where the selected image quality is maintained, select Off.R1136_en.book  Page 32  Friday, March 2, 2007  9:42 AM
Camera33Capture tone—Select  the tone you want to hear when you take a picture.Memory in use—Select where to store your images.Rotate image - Select whether you want the image to be rotated the right way up when you open it in the gallery.Restore camera settings—Select Yes to return the default values to the camera settings.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.The camera has an LED flash for low light conditions. The following flash modes are available for the still image camera: Automatic (), On (), R. eye redu. (), and Off ().To change the flash mode, in the active toolbar, select the desired flash mode.Setup settings—color and lightingTo enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, use the scroll key to scroll through the active toolbar, and select from the following options:White balance—Select the current lighting condition from the list. This allows the camera to reproduce colors more accurately.Exposure compensation (images only)—Adjust the exposure time of the camera.Flash—Select the desired flash mode. See ‘Flash’, p. 33.Colour tone—Select a color effect from the list.Light sensitivity (images only)—Select the light sensitivity of the camera. The darker the environment, the higher the light sensitivity should be.The screen display changes to match any settings you make, so that you see how the change affects the pictures or videos.The available settings vary depending on the selected camera.The setup settings are camera specific; if you change the settings in the secondary camera, the settings in the main camera do not change. The setup settings do, however, transfer between the image and video modes. The setup settings return to the default settings when you close the camera.R1136_en.book  Page 33  Friday, March 2, 2007  9:42 AM
Camera34If you select a new scene, the color and lighting settings are replaced by the selected scene. See ‘Scenes’, p. 34. You can change the setup settings after selecting a scene if needed.ScenesA scene helps you to find the right color and lighting settings for the current environment. The settings of each scene have been set according to a certain style or environment. Scenes are only available in the main camera.In the active toolbar, select from the following options:Video scenesAutomatic ( )(default) and Night ()Image scenesAuto () (default), User defined (), Portrait (), Landscape (), Night (), and Night portrait ().When you take pictures, the default scene is Auto.To make your own scene suitable for a certain environment, in the main display, scroll to User defined, and select Options > Change. In the user defined scene you can adjust different lighting and color settings. To copy the settings of another scene, select Based on scene mode and the desired scene. In the cover display, select Settings > User scene > Change. To copy the settings of another scene, select Based on scene.Take pictures in a sequenceThe sequence mode is available only in the main camera.To set the camera to take six pictures or more in a sequence (if enough memory available), in the active toolbar, select Switch to sequence mode to take six pictures in quick succession. The number of pictures taken depends on the available memory.To take six pictures, press the capture key. To stop taking pictures, press Cancel. To take more than six pictures, press and hold the capture key. To stop taking pictures, release the capture key. You can capture up to 100 images, depending on the available memory.After you take the pictures, they are shown in a grid on the display. To view a picture, press   to open it. If you used a time period for taking pictures, the last taken picture is shown on the display. To view other pictures, press  .You can also use the sequence mode with the self-timer. When using the self-timer, the maximum number of pictures is six.To return to the sequence mode viewfinder, press the  capture key.R1136_en.book  Page 34  Friday, March 2, 2007  9:42 AM
Camera35You in the picture—self-timerThe self-timer is available only in the main camera.Use the self-timer to delay the capture so that you can include yourself in the picture. To set the self-timer delay, in the active toolbar, select Self timer > 2 seconds, 10 seconds, or 20 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay elapses. To switch off Self timer, in the active toolbar, select Self timer > Off. Tip! In the active toolbar, select Self timer > 2 seconds to keep your hand steady when taking a picture.Record videosTo record videos using the cover display as the viewfinder (fold closed), do the following:1If the camera is in the Image mode, press   to switch to Video mode. 2Press   to start recording.  The red record icon  is shown and a tone sounds, indicating that recording has started. 3To stop recording, press   or select Stop.  The video clip is automatically saved to the Images & video folder in Gallery.See ‘Gallery’, p. 38. The maximum length of the video is 60 minutes (if enough memory available).To record videos using the main display as the viewfinder (fold open), do the following:1If the camera is in the Image mode, select Switch to video mode from the active toolbar. 2To start recording, press  . The red record icon  is shown and a tone sounds, indicating that recording has started. 3To stop recording, press   or select Stop. The video clip is automatically saved to Images & video in Gallery. See ‘Images and video clips’ p. 38. The maximum length of the video is 60 minutes (if enough memory available).To pause recording at any time, select Pause. The pause icon ( ) blinks on the display. Video recording automatically stops if recording is set to pause and there are no keypresses within a minute. Select Continue to resume recording.To zoom in or out of the subject, press the volume keys on the side of the device.To make lighting and color adjustments before recording a video, use the scroll key to scroll through the active R1136_en.book  Page 35  Friday, March 2, 2007  9:42 AM
Camera36toolbar. See ‘Setup settings—color and lighting’, p. 33 and ‘Scenes’, p. 34.To free memory before recording a video, select Options > Go to free memory (only available if you have backed up images or video clips). See ‘Free memory’, p. 40.To activate the front camera, select Options > Use secondary camera.Video capture indicatorsThe video viewfinder displays the following:1The current capture mode indicator.2The audio mute on indicator.3The active toolbar, which you can scroll through before recording to select different items and settings (the toolbar is not displayed during recording). See ‘Active toolbar’, p. 31.4The total available video recording time. When you are recording, the current video length indicator also shows the elapsed time and time remaining.5The device memory ( ) and memory card ( ) indicators show where videos are saved.6The video quality indicator indicates whether the quality of the video is High, Normal, or Sharing.7The video clip file type.To display all viewfinder indicators, select Options > Show icons. Select Hide icons to display only the video status indicators, and during the recording, the available record time, zoom bar when zooming, and the selection keys.After recording a videoAfter you record a video clip, select the following from the active toolbar in the main display (available only if Show captured video is set to On in video settings):• To immediately play the video clip you just recorded, select Play.• If you do not want to keep the video, select Delete.• To send the video clip using multimedia, e-mail, Bluetooth connectivity, or upload it to your online album, press the call key, or select Send. For more information, see ‘Messaging’, p. 68, ‘Bluetooth connectivity’, p. 59, and ‘Online sharing’, p. 42. This option is not available during an active call. You may not be able to send video clips saved in the .mp4 file format in a multimedia message. You can also send the video clip to a call recipient during an active call. Select Send to caller.R1136_en.book  Page 36  Friday, March 2, 2007  9:42 AM
Camera37• To record a new video clip, select New video.Video settingsThere are two kinds of settings for the video recorder: Video setup and main settings. To adjust Video setup settings, see ‘Setup settings—color and lighting’, p. 33. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Video quality—Set the quality of the video clip to High (best quality for long term usage and playback on a compatible TV or PC and handset), Normal (standard quality for playback through your handset), or Sharing (limited video clip size to send using multimedia message). If you want to view the video on a compatible TV or PC, select High, which has QVGA resolution (320x240) and the .mp4 file format. To send the video clip through MMS, select Sharing (QCIF resolution, .3gp file format). The size of the video clip recorded with Sharing is limited to 300 KB (about 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device.Audio recording—Select Off if you do not want to record sound.Add to album—Select whether you want to add the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums.Show captured video—Select whether you want the first frame of the recorded video clip to be shown on the display  after the recording stops. Select Play from the active toolbar (main camera) or Options > Play (secondary camera) to view the video clip.Default video name—Define the default name for the captured video clips.Memory in use—Define the default memory store: device memory or memory card (if inserted).Restore camera settings—Select Yes to return the default values to the camera settings.R1136_en.book  Page 37  Friday, March 2, 2007  9:42 AM
Gallery38Gallery To store and organize your images, video clips, sound clips, and streaming links, press  , and select Gallery. Tip! If you are in another application, to view the last saved picture in Gallery, press  . To enter the Images & video folder main view, press   again.View and browse filesSelect Images & video , Tracks , Sound clips , Streaming links , Presentations , or All files  , and press   to open it. You can browse and open folders; and mark, copy, and move items to folders. You can also create albums; and mark, copy, and add items to albums. See ‘Albums’, p. 40.Files stored on your compatible memory card (if inserted) are indicated with  .To open a file, press  . Video clips, .ram files, and streaming links are opened and played in RealPlayer, and music and sound clips in Music player. See ‘RealPlayer’, p. 27, and ‘Music player’, p. 21.To copy or move files to the memory card (if inserted) or to device memory, select a file and Options > Move and copy > Copy to memory card or Move to memory card, or Copy to phone mem. or Move to phone mem.. To download sound clips into Gallery using the browser, in the Sound clips folders, select Downld. sounds.Images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or through Bluetooth connectivity. To be able to view a received image or video clip in Gallery or in a media player, you must save it in the device memory or on a compatible memory card (if inserted).Select Gallery > Images & video. The images and video clip files are in a loop, and ordered by date and time. The number of files is displayed. To browse the files one by one, R1136_en.book  Page 38  Friday, March 2, 2007  9:42 AM
Gallery39press   or  . To browse files in groups, press   or . To switch between landscape and portrait modes, select Options > Rotate display. The content in the Images & video folder is shown in the selected mode.When the image is opened, to zoom in an image, press the zoom keys on the side of your device. The zooming ratio is not stored permanently.To rotate the selected image left or right, select Options > Rotate > Left or Right.To print your images on a compatible printer or to store them on a compatible memory card (if inserted) for printing, select Options > Print. See ‘Image print’, p. 41. You can also tag images for later printing to the Print Basket in Gallery. See ‘Print Basket’, p. 40.To edit a video clip or a photo, select Options > Edit. An image editor or a video editor opens. See ‘Edit video clips’, p. 43. See ‘Edit images’, p. 42. To create custom video clips, select a video clip or several clips in the gallery, and select Options > Edit. See ‘Edit video clips’, p. 43.To add an image or a video clip to an album in the gallery, select Options > Albums > Add to album. See ‘Albums’, p. 40.To use the picture as a background image, select the picture and Options >Use image > Set as wallpaper.To delete an image or video clip, from the active toolbar, select Delete. See ‘Active toolbar’, p. 39.To switch from Gallery to the camera, press  .Active toolbarIn the Images & video folder, you can use active toolbar as a shortcut to select different tasks. The active toolbar is available only when you have selected an image or a video clip. In the active toolbar, scroll up or down to different items, and select them by pressing  . The available options vary depending on the view you are in and whether you have selected an image or a video clip. You can also define whether the active toolbar is always visible on the display or activated by a keypress.If you want the active toolbar to be visible on the display, select Options > Show icons.If you want the active toolbar to be visible only when you need it, select Options > Hide icons. To activate the active toolbar, press  .Select from the following: to play the selected video clip to send the selected image or video clipR1136_en.book  Page 39  Friday, March 2, 2007  9:42 AM
Gallery40 /   to add or remove an image from the Print Basket. See ‘Print Basket’, p. 40.  to view the images in the Print Basket to start a slide show of your images to delete the selected image or video clip to print the viewed image to reduce the resolution of the selected image to free memory for new images. See ‘Free memory’, p. 40.The available options may vary depending on the view you are in.Print BasketYou can tag images to the Print Basket, and print them later with a compatible printer or in a compatible printing kiosk, if available. See ‘Image print’, p. 41. The tagged images are indicated with   in the Images & video folder and albums.To tag an image for later printing, select an image, and Add to Print Basket from the active toolbar.To view the images in the Print Basket, select View Print Basket from the active toolbar, or select   from the Images & video folder (available only when you have added pictures to the Print Basket).To remove an image from the Print Basket, select an image in the Images & video folder or in an album, and Remove from print from the active toolbar.AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, select Images & video > Options > Albums > View albums. To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options > Albums > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip. The added pictures and video clips are not deleted from the Images & video folder.To remove a file from an album, press  . The file is not deleted from the Images & video folder in Gallery.To create a new album, in the albums list view, select Options > New album.Free memoryTo reduce the resolution and file size of images saved in Gallery and free memory for new pictures, select Options > Shrink. To back up the images first, copy them R1136_en.book  Page 40  Friday, March 2, 2007  9:42 AM
Gallery41to a compatible PC or other location. Selecting Shrink reduces the resolution of an image to 640x480.To increase free memory space after you have copied items to other locations or devices, select Options > Free memory. You can browse a list of files you have copied. To remove a copied file from Gallery, select Options > Delete.Image printTo print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer.Use Image print to print your images using a compatible USB data cable, Bluetooth connectivity, or a compatible memory card (if available).You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpeg format.To print to a printer compatible with PictBridge, connect the data cable before you select the print option, and check that the data cable mode is set to Image print or Ask on connection. See ‘USB’, p. 62.Printer selectionWhen you use Image print for the first time, a list of available compatible printers is displayed after you select the image. Select a printer. The printer is set as the default printer.If you have connected a printer compatible with PictBridge using a compatible USB data cable, the printer is automatically displayed.If the default printer is not available, a list of available printing devices is displayed.To change the default printer, select Options > Settings > Default printer.Print previewAfter you select the printer, the selected images are displayed using predefined layouts. To change the layout, press   or   to browse through the available layouts for the selected printer. If the images do not fit on a single page, press   or   to display the additional pages.Print settingsThe available options vary depending on the capabilities of the printing device you selected.To set a default printer, select Options > Default printer.R1136_en.book  Page 41  Friday, March 2, 2007  9:42 AM
Gallery42To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.Print onlineWith Print online, you can order prints of images online directly to your home, or to a store where you can pick them up. The available products depend on the service provider.To use Print online, you must have at least one printing service configuration file installed. The files can be obtained from printing service providers that support Print online.For more information on the application, see the guides for your device at www.nokia.com/support or your local Nokia website.Online sharingWith Online share, you can share images and video clips in compatible online albums, weblogs, or in other online sharing services on the web. You can upload content, save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the service provider.To use Online share, you must subscribe to the service with an online image sharing service provider, and create a new account. You can usually subscribe to the service on the web page of the service provider. Contact your service provider for details on subscribing to the service. For more information on compatible service providers, see the product support pages at www.nokia.com/support or your local Nokia website.For more information on the application, see the guides for your device at www.nokia.com/support or your local Nokia website.Edit imagesTo edit the pictures after taking them, or the ones already saved in Gallery, select Options > Edit. Select Options > Apply effect to open a grid where you can select different edit options indicated by small icons. You can crop and rotate the image; adjust the brightness, color, contrast, and resolution; and add effects, text, clip art, or a frame to the picture.Crop imageTo crop an image, select Options > Apply effect > Crop. To crop the image size manually, select Manual or a predefined aspect ratio from the list. If you select Manual, R1136_en.book  Page 42  Friday, March 2, 2007  9:42 AM
Gallery43a cross appears in the upper left corner of the image. Use the scroll key to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle that forms the cropped image.If you selected a predefined aspect ratio, select the upper left corner of the area to be cropped. To resize the highlighted area, use the scroll key. To freeze the selected area, press  . To move the area within the picture, use the scroll key. To select the area to be cropped, press  .Reduce rednessTo reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press  . A loop appears on the display. To resize the loop to fit the size of the eye, use the scroll key. To reduce the redness, press  .Useful shortcutsShortcuts in the image editor:• To view an image in the full screen, press  . To return to the normal view, press   again.• To rotate an image clockwise or counterclockwise, press  or .• To zoom in or out, press   or  .• To move on a zoomed image, press  ,  ,  , or .Edit video clipsTo edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options >Edit > Video Editor. To create custom video clips, combine and trim video clips, and add images, sound clips, transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips.The video editor supports .3gp and .mp4 video file formats, and .aac, .amr, .mp3, and .wav audio file formats.You can use Movie director to create custom video clips. Select the video clips and images you want to create a muvee with and select Options > Edit > Create muvee. See ‘Movie director’, p. 45.In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down.R1136_en.book  Page 43  Friday, March 2, 2007  9:42 AM
Gallery44Edit video, sound, image, text, and transitionsTo create custom video clips, mark and select one or more video clips, and select Options > Edit > Video Editor.To modify the video, select from the following options:Edit video clip:Cut—trims the video clip in the cut video clip viewAdd colour effect—inserts a color effect on the video clipUse slow motion—slows the speed of the video clipMute sound or Unmute sound—mutes or unmutes the original video clip soundMove—moves the video clip to the selected locationRemove—removes the video clip from the videoDuplicate—makes a copy of the selected video clipEdit text (shown only if you added text)—to move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the textEdit image (shown only if you added an image)—to move, remove, or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the imageEdit sound clip (shown only if you have added a sound clip)—to cut or move the sound clip, to adjust its length, or to remove or duplicate the clipEdit transition—There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. You can select start transition when the first transition of the video is active.Insert—Select Video clip, Image, Text, Sound clip, or New sound clip.Movie—Preview the movie in the full screen or as a thumbnail, save the movie, or cut the movie to a proper size for sending it in a multimedia message.To take a snapshot of a video clip, in the cut video view, select Options > Take snapshot. In the thumbnail preview view, press  , and select Take snapshot.To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory. In the Settings view, you can also define Default video name, Default snapshot name, Resolution, and Memory in use.To send a video clip, select Options > Send > Via multimedia, Via e-mail, or Via Bluetooth. Contact your wireless service provider for details of the maximum multimedia message size that you can send.R1136_en.book  Page 44  Friday, March 2, 2007  9:42 AM
Gallery45Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, send the clip using Bluetooth wireless technology. See ‘Send data using Bluetooth connectivity’, p. 60. You can also transfer your videos to a compatible PC using Bluetooth connectivity, a compatible USB cable, or by using a compatible memory card reader enhancement.Slide showIn the active toolbar, select Slide show ( ) to view a slide show of images in full screen. The slide show starts from the selected file. Select from the following:Pause—to pause the slide showContinue—to resume the slide show, if pausedEnd—to close the slide showTo browse the images, press   (previous) or   (next) (available only when Zoom and pan is off).To adjust the tempo of the slide show, before starting the slide show, select Options > Slide show > Settings > Delay between slides.To make the slide show move smoothly from one slide to another, and let the gallery randomly zoom in and out in the images, select Zoom and pan.To add sound to the slide show, select Options > Slide show > Settings > Music or Track.To decrease or increase the volume, use the volume keys in your device.PresentationsWith presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select Presentations, scroll to an image, and select Options > Play. To pause playing, select Options > Pause.To zoom in, press  . To zoom out, press  .To rotate the image 90 degrees clockwise or counter-clockwise, press   or  . To rotate the image 45 degrees, press   or  .To switch between full screen and normal screen, press .Movie directorTo create muvees, press  , and select Gallery, images and videos, and Options > Edit > Create muvee.A muvee is a short, edited video clip that can contain video, images, music, and text. Quick muvee is created R1136_en.book  Page 45  Friday, March 2, 2007  9:42 AM
Gallery46automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees in a multimedia message.A muvee can be saved in Gallery in .3gp file format.Create a quick muvee1In Gallery, select images and videos for the muvee, and Options > Edit > Create muvee. The style selection view opens.2Select a style for the muvee from the style list. 3Select Options > Create muvee.Create a custom muvee1In Gallery, select images and videos for the muvee, and Options > Edit > Create muvee. The style selection view opens.2Scroll to the desired style, and select Options > Customise.3Reorder and edit the selected items, or add or remove items from your muvee in Videos & images or Music.In Videos & images, you can define the order in which the files are played in the muvee. To select the file you want to move, press  . Then scroll to the file below which you want to place the marked file, and press  . To add or remove images and videos from the muvee, select Options > Add/Remove.To add albums and their content to the muvee, in the image or video clip list view, select Options > Albums.To cut the video clips, In Videos & images, select Options > Select contents. See ‘Select content’, p. 47.In Message you can add an opening and closing text to a muvee.In Length, you can define the length of the muvee. Select from the following:Multimedia message—to optimize the length of the muvee for sending in a multimedia messageAuto-select—to include all the selected images and video clips in the muveeSame as music—to set the muvee duration to be the same as the chosen music clipUser defined—to define the length of the muvee4Select Options > Create muvee. The preview view opens.5To preview the custom muvee before saving it, select Options > Play.6To save the muvee, select Options > Save.To create a new custom muvee by using the same style settings, select Options > Recreate.R1136_en.book  Page 46  Friday, March 2, 2007  9:42 AM
Gallery47Select contentTo edit the selected video clips, in the Videos & images folder, select Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slide, green indicates included, red indicates excluded, and grey indicates neutral parts.To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot.To let Movie director randomly include or exclude a certain part of the video clip, scroll to the part, and select Options > Mark as neutral. To randomly include or exclude parts of the clip, select Options > Mark all as neutral.SettingsIn the style selection view, select Options > Customise > Settings to edit the following options:Memory in use—Select where to store your muvees.Resolution—Select the resolution of your muvees. Select Automatic to use the optimal resolution based on the number and length of the video clips you have selected.Default muvee name—Set a default name for the muvees.R1136_en.book  Page 47  Friday, March 2, 2007  9:42 AM
Personalize your device48Personalize your deviceTo personalize your device, select from the following:• To use the standby display for fast access to your most frequently used applications, see ‘Active standby mode’, p. 50.• To change the standby mode background image or what is shown in the screen saver, see ‘Change the look of your device’, p. 49.• To change the look of the cover display, see ‘Cover display’, p. 50.• To customize the ringing tones, see ‘Profiles—set tones’, p. 48 and ‘Add ringing tones for contacts’, p. 87.• To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see ‘Standby mode’, p. 96. • To change the clock shown in the standby mode, press , and select Applications > Clock > Options > Settings > Clock type > Analogue or Digital.• To change the welcome note to an image or animation, press  , and select Tools > Settings > General > Personalisation > Display > Welcome note / logo.• To change the main menu view, in the main menu, select Options > Change Menu view > Grid or List.• To use animated icons in your device, in the main menu, select Options > Icon animation > On.• To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders and place applications that you use more often into the main menu.Profiles—set tones To set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press  , and select Tools > Profiles.To change the profile, select Tools > Profiles, a profile, and Options > Activate. You can also change the profile by pressing   in the standby mode. Scroll to the profile you want to activate, and select OK. Tip! To switch between the general and silent profiles, press and hold  .To modify a profile, press  , and select Tools > Profiles. Scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press   to open the choices. Tones stored on a compatible memory card (if inserted) are indicated with  .R1136_en.book  Page 48  Friday, March 2, 2007  9:42 AM
Personalize your device49In the tones list, the Download sounds link (network service) opens a list of bookmarks. You can select a bookmark and start connection to a web page to download more tones.If you want the caller’s name to be spoken when your device rings, select Options > Personalise, and set Say caller's name to On. The caller’s name must be saved in Contacts.To create a new profile, select Options > Create new.Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by   in the signal strength indicator area. All wireless RF signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.When the Offline profile is active, you can use your device without a SIM card. Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. You can also use Bluetooth connectivity while in the Offline profile. See ‘Bluetooth connectivity’, p. 59.To leave the Offline profile, press the power key, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength).Change the look of your device To change the look of the display, such as the wallpaper and icons, press  , and select Tools > Themes.To change the theme that is used for all the applications in your device, select Themes > General. To change the theme of a certain application, in the main view, select an application.To preview a theme before activating it, select Options > Preview. To activate the theme, select Options > Set. The active theme is indicated by  .The themes on a compatible memory card (if inserted) are indicated by  . The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card R1136_en.book  Page 49  Friday, March 2, 2007  9:42 AM
Personalize your device50without the memory card, save the themes in the device memory first.To change the layout of the main menu, select Themes > Menu view.To open a browser connection and download more themes, in General or Menu view, select Download themes (network service). Important: Use only services that you trust and that offer adequate security and protection against harmful software.To edit the wallpaper and power saver of the current theme, select Themes > Wallpaper to change the background image on the display for the active standby mode. See also ‘Display’, p. 95 for power saver time-out setting.Cover displayTo change the look of the cover display, press   and select Tools > Themes > Cover personalis., and from the following:Wallpaper—Select the background image displayed on the cover display in the standby mode. Screen saver—Select an image or animation to use as a screen saver on the cover display and how long it is displayed.When you select an image to use as wallpaper or a screen saver, a cropping frame the size of the cover display is shown on top of the image. You can zoom and rotate the area of the image. Scroll to move the frame around the display. To use the area inside the frame, select Options > Set as wallpaper or Set as screen saver. You cannot use a copyright-protected image as wallpaper or screen saver.Closing animation—Select a short animation to play when you close the cover.Closing tone—Select a short tune to play when you close the cover.Opening tone—Select a short tune to play when you open the cover and the device is in the standby mode.Active standby modeThe active standby display shows application shortcuts, and events from applications such as calendar and player.To switch the active standby on or off, press  , and select Tools > Settings > General > Personalisation > Standby mode > Active standby.R1136_en.book  Page 50  Friday, March 2, 2007  9:42 AM
Personalize your device51Scroll to an application or event, and press  .The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on.To change the default applications’ shortcuts, press , and select Tools > Settings > General > Personalisation > Standby mode > Active standby apps..Some shortcuts may be fixed, and you cannot change them.R1136_en.book  Page 51  Friday, March 2, 2007  9:42 AM
Web browser52Web browser Press  , and select Web (network service). Shortcut: To start the web browser, press and hold  in the standby mode.With the web browser, you can view hypertext markup language (HTML) web pages on the internet as originally designed. You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML).With Web, you can zoom in and out on a page, use Mini Map and page overview to navigate on pages, read web feeds and blogs, bookmark web pages, and download content.Check the availability of services, pricing, and fees with your service provider. Service providers will also give you instructions on how to use their services.To use the web browser, you need an access point to connect to internet. See ‘Access points’, p. 103.Connection securityIf the security indicator   is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Security certificates may be required for some services, such as banking services. You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. For more information, contact your service provider. See also ‘Certificate management’, p. 98 for more information on the certificates and certificate details.Bookmarks viewThe bookmarks view allows you to select web addresses from a list or from a collection of bookmarks in the Auto. Bookmarks folder. You can also enter the URL address of the web page you want to visit directly into the field ( ).R1136_en.book  Page 52  Friday, March 2, 2007  9:42 AM
Web browser53 indicates the starting page defined for the default access point.You can save URL addresses as bookmarks while browsing on the internet. You can also save addresses received in messages to your bookmarks and send saved bookmarks.Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.To open the bookmarks view while browsing, press  , or select Options > Bookmarks.To edit the details of a bookmark, such as the title, select Options > Bookmark manager > Edit.In the bookmarks view, you can also enter other browser folders. The web browser allows you to save web pages during browsing. In the Saved pages folder, you can view the content of the pages you have saved offline.The web browser also keeps track of the web pages you visit during browsing. In the Auto. Bookmarks folder, you can view the list of visited web pages.In Web Feeds, you can view saved links to web feeds and blogs to which you have subscribed. Web feeds are commonly found on major news organization web pages, personal weblogs, online communities that offer latest headlines, and article summaries. Web feeds use RSS and ATOM technologies.Browse the web Important:Use only services that you trust and that offer adequate security and protection against harmful software.With Web, you can view web pages as they are originally designed. To browse a web page, in the bookmarks view, select a bookmark, or enter the address in the field ( ). Then press  .Some web pages may contain material, such as graphics and sounds, that requires a large amount of memory to view. If your device runs out of memory while loading such a page, the graphics on the page are not shown. To browse web pages without graphics to save memory, select Options > Settings > Page > Load images and sounds > No. Tip! To return to the standby mode with the browser open in the background, press   twice or  . To return to the browser, press and hold  , and select the browser from the list.R1136_en.book  Page 53  Friday, March 2, 2007  9:42 AM
Web browser54To open links and make selections, press  . To open a link in a new window, select Options > Window > Link in new window.To enter a new web page address you want to visit, select Options > Go to web address. Tip! To visit a web page saved as bookmark in the bookmarks view, while browsing, press   and select a bookmark.To retrieve the latest content of the page from the server, select Options > Navigation options > Reload.To save the web address of the current page as bookmark, select Options > Save as bookmark.To use Visual history to view snapshots of the pages you have visited during the current browsing session, select Back (available if History list is set on in the browser settings) or Options > Navigation options > History. To go to a previously visited page, select the page.To save a page while browsing, select Options > Tools > Save page. You can save pages to the device memory or compatible memory card (if inserted), and browse them when offline. You can also group the pages into folders. To access the pages later, in the bookmarks view, select Saved pages.To open a sublist of commands or actions for the currently open page, select Options > Service options (if supported by the web page).To allow or prevent the automatic opening of multiple windows, select Options > Window > Block pop-ups or Allow pop-ups.Shortcuts while browsing• Press   to open your bookmarks.• Press   to search for keywords in the current page.• Press   to return to the previous page.• Press   to list all open windows. • Press   to close the current window if two or more windows are open.• Press   to show the page overview of the current page. Press   again to zoom in and view the desired section of the page.• Press   to enter a new web address.• Press   to go to the start page.• Press   or   to zoom the page in or out.To switch between portrait and landscape views, select Options > Rotate screen.Text SearchTo search for keywords within the current web page, select Options > Find > Text, and enter a keyword. To go to the R1136_en.book  Page 54  Friday, March 2, 2007  9:42 AM
Web browser55previous match, press  . To go to the next match, press . Tip! To search for keywords within the page, press .Browser toolbarWith the toolbar, you can select most frequently used features in the browser. To open the toolbar, press   on an empty spot on a web page. To move within the toolbar, press   or  , To select a feature, press  .In the toolbar, select from the following:Frequently used links to view a list of the web addresses you visit frequently.Page overview to view the overview of the current web page.Find to search for keywords within the current page.Reload to refresh the page.Subscribe(if available) to view a list of available web feeds on the current web page, and subscribe to a web feed.Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free of charge, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo or an .mp3 file can be saved in Gallery. Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing.1To download the item, select the link.2Select the appropriate option to purchase the item (for example, “Buy”).3Carefully read all the information provided.To continue the download, select Accept. To cancel the download, select Cancel.When you start a download, a list of ongoing and completed downloads from the current browsing session is displayed. To also view the list, select Options > Downloads. In the list, scroll to an item, and select Options to cancel ongoing downloads, or open, save, or delete completed downloads.Mini MapMini Map helps you to navigate on web pages that contain large amount of information. When Mini Map is set on in the browser settings and you scroll through a large web page, Mini Map opens and shows an overview of the web page you browse. To scroll in Mini Map, press R1136_en.book  Page 55  Friday, March 2, 2007  9:42 AM
Web browser56,  ,  , or  . When you find the desired location, stop scrolling, and Mini Map disappears and leaves you at the selected location.To set Mini Map on, select Options > Settings > General> Mini Map > On.Page overviewWhen you are browsing a web page that contains a large amount of information, you can use page overview to view what kind of information the page contains.To show the page overview of the current page, press  . To find the desired spot on the page, press  ,  ,  , or  . Press   again to zoom in and view the desired section of the page.Web feeds and blogsWeb feeds are xml files on web pages that are widely used by the weblog community and news organizations to share the latest entry headlines or full text, for example, recent news in the form of news feeds. Blogs or weblogs are web diaries. Most of the web feeds use RSS and ATOM technologies. It is common to find web feeds on web, blog, and wiki pages.The web browser automatically detects if a web page contains web feeds. To subscribe to a web feed, select Options > Subscribe, or click on the link. To view the web feeds to which you have subscribed, in the bookmarks view, select Web feeds.To update a web feed, select it, and Options > Refresh.To define how the web feeds are updated, select Options > Settings > Web feeds. See ‘Settings’, p. 57.End connectionTo end the connection and view the browser page offline, select Options > Tools > Disconnect; or to end the connection and close the browser, select Options > Exit.Pressing   does not end the connection but takes the browser to the background.To delete the information the network server collects about your visits to various web pages, select Options > Clear privacy data > Delete cookies.To clear the data you entered for different forms on the web pages you visited, select Options > Clear privacy data > Form password data.To clear the information stored about the pages you have visited during the current browsing session, select Options > Clear privacy data > History.R1136_en.book  Page 56  Friday, March 2, 2007  9:42 AM
Web browser57Empty the cacheThe information or services you have accessed are stored in the cache memory of the device.A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Clear privacy data > Clear cache.SettingsSelect Options > Settings and from the following:General settingsAccess point—Change the default access point. See ‘Connection’, p. 102. Some or all access points may be preset for your device by your service provider; you may not be able to change, create, edit, or remove them.Homepage—Define the home page.Mini Map—Set Mini Map on or off. See ‘Mini Map’, p. 55.History list—While browsing, to use the selection key Back to see a list of the pages you have visited during the current browsing session, set History list on.Security warnings—Hide or show security notifications.Java/ECMA script—Enable or disable the use of scripts.Page settingsLoad images and sounds—Select whether you want to load images and other objects while browsing. If you select No, to load images or objects later during browsing, select Options > Tools > Load images.Screen size—Select between Full screen and the normal view with the Options list.Default encoding—If text characters are not shown correctly, you can select another encoding according to language for the current page.Font size—Define the font size that is used for web pages.Block pop-ups—Allow or block automatic opening of different pop-ups while browsing.Automatic reload—If you want the web pages to be refreshed automatically while browsing, select On.Privacy settingsAuto. bookmarks—Enable or disable automatic bookmark collecting. If you want to continue saving the addresses of the visited web pages into the Auto. Bookmarks folder, but hide the folder from the bookmarks view, select Hide folder.R1136_en.book  Page 57  Friday, March 2, 2007  9:42 AM
Web browser58Form data saving—If you do not want the data you enter to different forms on a web page to be saved and used next time the page is entered, select Off.Cookies—Enable or disable the receiving and sending of cookies.Serial no. sending—To send the serial number of your device as your user identification when requested by web services, select On (if available).Web feeds settingsAutomatic updates—Define whether you want the web feeds to be updated automatically or not, and how often you want to update them. Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Acc. point for auto-update (only available when Automatic updates is on)—Select the desired access point for updating.R1136_en.book  Page 58  Friday, March 2, 2007  9:42 AM
Connections59ConnectionsConnection manager Data connectionsPress  , and select Tools > Conn. mgr. > Active data connections. In the active connections view, you can see the open data connections: data calls ( ), and packet data connections ( ).Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.To view the details of a connection, select Options > Details. The details shown depend on the connection type.Bluetooth connectivity You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); connect to a compatible printer to print images with Image print. See ‘Image print’, p. 41.Since devices with Bluetooth wireless technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Basic Imaging Profile, SIM Access Profile, Dial-up Networking Profile, File Transfer Profile, Generic Access Profile, Generic Audio Visual Distribution Profile, Generic Object Exchange Profile, Hands-Free Profile, Headset Profile, Human Interface Device Profile, Object Push Profile, Service Discovery Application Profile, Serial Port Profile, and Synchronization Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.R1136_en.book  Page 59  Friday, March 2, 2007  9:42 AM
Connections60There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. When the device is locked, you cannot use Bluetooth connectivity. See ‘Phone and SIM card’, p. 97 for more information on locking the device.SettingsPress  , and select Tools > Bluetooth. When you open the application for the first time, you are asked to define a name for your device.Select from the following:Bluetooth—To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection. To switch off Bluetooth connectivity, select Off.My phone's visibility—To allow your device to be found by other devices with Bluetooth wireless technology, select Shown to all. To set a time after which the visibility is set from shown to hidden, select Define period. To hide your device from other devices, select Hidden.My phone's name—Edit the name shown to other devices using Bluetooth wireless technology.Remote SIM mode—To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On. For more information, see ‘Remote SIM mode’, p. 62.Security tipsWhen you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden. In this way, you can better control who can find your device with Bluetooth wireless technology, and connect to it.Do not pair with or accept connection requests from an unknown device. In this way, you can better protect your device from harmful content.Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. For example, if you are connected to a compatible headset, you can also transfer files to another compatible device at the same time.For Bluetooth connectivity indicators, see ‘Essential indicators’, p. 17.R1136_en.book  Page 60  Friday, March 2, 2007  9:42 AM
Connections61 Tip! To send text using Bluetooth connectivity, open Notes, write the text, and select Options > Send > Via Bluetooth.1Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery.2Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth wireless technology within range start to appear on the display.Device icons:   computer,   phone,   audio or video device, and   other device.To interrupt the search, select Stop.3Select the device with which you want to connect.4If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 61.5When the connection has been established, Sending data is shown. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode.Pair devicesTo pair with compatible devices and view your paired devices, in the Bluetooth application main view, press  .Before pairing, create your own passcode (1–16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.1To pair with a device, select Options > New paired device. Devices with Bluetooth wireless technology within range start to appear on the display.2Select the device, and enter the passcode. The same passcode must be entered on the other device as well.Some audio enhancements connect automatically to your device after pairing. Otherwise, scroll to the enhancement, and select Options > Connect.Paired devices are indicated by   in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options:Set as authorised—Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.   indicates authorized devices in the paired devices view.Set as unauthorised—Connection requests from this device must be accepted separately every time.R1136_en.book  Page 61  Friday, March 2, 2007  9:42 AM
Connections62To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept,   is shown, and the item is placed in the Inbox folder in Messaging. Messages received through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 70.Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. See ‘Settings’, p. 60. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 61. Activate the remote SIM mode from the other device.When remote SIM mode is on in your device, Remote SIM is displayed in the standby mode. The connection to the wireless network is turned off, as indicated by   in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first.To leave the remote SIM mode, press the power key, and select Exit remote SIM mode.USB Press , and select Tools > USB.To have the device ask the purpose of the USB cable connection each time the cable is connected, select Ask on connection > Yes.If Ask on connection is set to off or you want to change the mode during an active connection, select USB mode and from the following:Media player—to synchronize music with Windows Media Player. See ‘Music transfer with Windows Media Player’, p. 24.R1136_en.book  Page 62  Friday, March 2, 2007  9:42 AM
Connections63PC Suite—to use to use the data cable connection for the Nokia Nseries PC SuiteData transfer— to transfer data between your device and a compatible PCImage print—to print images on a compatible printer. See ‘Image print’, p. 41.PC connectionsYou can use your device with a variety of compatible PC connectivity and data communications applications. With Nokia Nseries PC Suite you can, for example, transfer images between your device and a compatible PC.Always create the connection from the PC to synchronize with your device.Synchronization Sync enables you to synchronize your notes, calendar, text messages, or contacts with various compatible applications on a compatible computer or on the internet.You may receive synchronization settings in a special message. See ‘Data and settings’, p. 71.In the Sync main view, you can see the different synchronization profiles. A synchronization profile contains the necessary settings to synchronize data in your device with a remote database on a server or compatible device.1Press , and select Tools > Sync. 2Select a synchronization profile and Options > Synchronise. To cancel synchronization before it finishes, select Cancel.Device manager To connect to a server and receive configuration settings for your device, to create new server profiles, or to view and manage existing server profiles, press  , and select Tools > Device mgr..You may receive server profiles and different configuration settings from your service providers and company information management department. These configuration settings may include connection and other settings used by different applications in your device.Scroll to a server profile, and select Options and from the following:Start configuration—to connect to the server and receive configuration settings for your deviceNew server profile—to create a server profileTo delete a server profile, scroll to it, and press  .R1136_en.book  Page 63  Friday, March 2, 2007  9:42 AM
Download!64Download! Download! (network service) is a mobile content shop available on your device.With Download! you can discover, preview, buy, download, and upgrade content, services, and applications that work with your Nokia N76. Games, ringing tones, wallpapers, applications, and much more are right at hand. The items are categorized under catalogs and folders provided by different service providers. The available content depends on your service provider.Press  , and select Download!.Download! uses your network services to access the most up-to-date content. For information on additional items available through Download!, contact your service provider or the supplier or manufacturer of the item.Download! receives ongoing updates, bringing you the latest content your service provider offers for your device. To update the content in Download! manually, select Options > Refresh list.To hide a folder or a catalog from the list, for example, to view only the items you use frequently, select Options > Hide. To make all the hidden items visible again, select Options > Show all.To buy the selected item in the main view or in a folder or catalog, select Options > Buy. A submenu opens, where you can select the version of the item and view price information. The available options depend on the service provider.To download an item that is free of charge, select Options > Get.Settings for Download!The application updates your device with the most recent content available from your service provider and other available channels. To change the settings, select Options > Settings and from the following:Access point—To select which access point is used to connect to the service provider’s server and whether to have the device to ask for the access point every time you use.Automatic open—Select Yes if you want the content or application to be opened automatically after downloading.Preview confirmation—Select No if you want to automatically download a preview of the content or R1136_en.book  Page 64  Friday, March 2, 2007  9:42 AM
Download!65application. Select Yes if you want to be asked separately each time before downloading a preview.Buy confirmation—Select Yes if you want to be asked for confirmation before buying content or an application. If you select No the buying process starts immediately after you select the option Buy.After you complete the settings, select Back. R1136_en.book  Page 65  Friday, March 2, 2007  9:42 AM
Time management66Time managementClock Press  , and select Applications > Clock. To view your active and inactive alarms, press  . To set a new alarm, select Options > Set alarm. When an alarm is active,   is shown.To turn off the alarm, select Stop. To stop the alarm for 5 minutes, select Snooze.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.To cancel an alarm, select Applications > Clock > Options > Remove alarm.To change clock settings, select Applications > Clock > Options > Settings > Time or Date, Clock type, or Clock alarm tone.To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.World clockTo open the world clock view, select Clock, and press   twice. In the world clock view, you can view the time in different cities. To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list.To set your current city, scroll to a city, and select Options > Set as current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.Calendar Press  and select Calendar. To add a new calendar entry, scroll to the desired date, select Options > New entry and one of the following:1Meeting—to remind you of an appointment that has a specific date and timeMeeting request—to create and send a new meeting request. You need to have a mailbox set up for sending requests. See ‘Mailbox’, p. 72.Memo—to write a general entry for a dayR1136_en.book  Page 66  Friday, March 2, 2007  9:42 AM
Time management67Anniversary—to remind you of birthdays or special dates (entries are repeated every year)To-do—to remind you of a task that needs doing by a specific date2Fill in the fields. To set an alarm, select Alarm > On, and enter the Alarm time and Alarm date.To add a description for an entry, select Options > Add description.3To save the entry, select Done. Shortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to Subject. In the to-do view, a to-do note entry opens.When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze.You can synchronize your calendar with a compatible PC using Nokia Nseries PC Suite. When creating a calendar entry, set the desired synchronisation option.Calendar viewsSelect Options > Settings to change the starting day of the week or the view that is shown when you open the calendar.To go to a certain date, select Options > Go to date. To jump to today, press  .To switch between the month view, week view, day view, and to-do view, press  .To send a calendar note to a compatible device, select Options > Send.If the other device is not compatible with Coordinated Universal Time (UTC), the time information of received calendar entries may not be displayed correctly.To modify the calendar, select Options > Settings > Calendar alarm tone, Default view, Week starts on, and Week view title.Manage your calendar entriesTo delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries.To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done.R1136_en.book  Page 67  Friday, March 2, 2007  9:42 AM
Messaging68Messaging Press  , and select Messaging (network service).Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.To create a new message, select New message.Messaging contains the following folders: Inbox—Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox. My folders—Organize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder. You can also create and save your own templates. Mailbox—Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 75. Drafts—Draft messages that have not been sent are stored here. Sent—The last messages that have been sent, excluding messages sent using Bluetooth connectivity, are stored here. To change the number of messages to be saved, see ‘Other settings’, p. 77. Outbox—Messages waiting to be sent are temporarily stored in the outbox, for example, when your device is outside network coverage. Reports—You can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service).To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options > Service command in the main view of Messaging.Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast.A packet data connection may prevent cell broadcast reception.R1136_en.book  Page 68  Friday, March 2, 2007  9:42 AM
Messaging69Text modesABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.To switch between the letter and number mode, press and hold  . To switch between the different character modes, press  .To insert a number in the letter mode, press and hold the desired number key. is displayed when you write text using traditional text input and    when using predictive text input.With predictive text, you can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words.To activate predictive text input, press  , and select Predictive text on. Tip! To turn predictive text input on or off, quickly press  twice.Write and send messagesBefore you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘E-mail settings’, p. 72 and ‘E-mail’, p. 75.The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1Select New message and from the following:Text message—to send a text messageMultimedia message—to send a multimedia message (MMS)Audio message—to send an audio message (a multimedia message that includes one sound clip)E-mail—to send an e-mail2In the To field, press   to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press  . You can also copy and paste the number or address from the clipboard.3In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.R1136_en.book  Page 69  Friday, March 2, 2007  9:42 AM
Messaging704In the message field, write the message. To insert a template, select Options > Insert or Insert object > Template.5To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip.6To take a new picture or record sound or video for a multimedia message, select Insert new > Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide.To see what the multimedia message looks like, select Options > Preview.7To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, Note, or Other for other file types. E-mail attachments are indicated by .8To send the message, select Options > Send, or press .Note: Your device may indicate that your message was sent to the message center number programmed into your device. Your device may not indicate whether the message is received at the intended destination. For more details about messaging services, contact your service provider.Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options, take up more space, limiting the number of characters that can be sent in a single message. You may not be able to send video clips that are saved in the .mp4 format or that exceed the size limit of the wireless network in a multimedia message.Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See ‘Multimedia messages’, p. 74.Inbox—receive messages In the Inbox folder,   indicates an unread text message,  an unread multimedia message,   an unread audio message, and   data received through Bluetooth connectivity.R1136_en.book  Page 70  Friday, March 2, 2007  9:42 AM
Messaging71When you receive a message,   and 1 new message are displayed in the standby mode. To open the message, select Show. If the fold is closed and the message cannot appear on the cover, Open fold to view message is displayed. Open the cover to view the message.When the fold is open, scroll to Inbox, and press   to open it. To reply to a received message, select Options > Reply.When the fold is closed and you have more than one unread message, select Show to open Inbox. Use the volume and quick cover keys to navigate in the Inbox folder and when viewing messages.Multimedia messagesImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.When you open a multimedia message ( ), you may see an image and a message.   is shown if sound is included, or   if video is included. To play the sound or the video, select the indicator.To see the media objects that have been included in the multimedia message, select Options > Objects.If the message includes a multimedia presentation,   is displayed. To play the presentation, select the indicator.Data and settingsYour device can receive many kinds of messages that contain data, such as business cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You may also receive settings from your service provider or company information management department in a configuration message.To save the data from the message, select Options and the corresponding option.Web service messagesWeb service messages are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.R1136_en.book  Page 71  Friday, March 2, 2007  9:42 AM
Messaging72Mailbox E-mail settingsTip! Use Settings Wizard to define your mailbox settings. Press  , and select Tools > Sett. wizard.To use e-mail, you must have a valid internet access point (IAP) in the device and define your e-mail settings correctly. See ‘Access points’, p. 103.If you select Mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 75.You must have a separate e-mail account. Follow the instructions given by your remote mailbox and internet service provider (ISP).When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection.To view previously retrieved e-mail messages offline, select No.To create a new e-mail message, select New message > E-mail in the messaging main view or Options > Create message > E-mail in your mailbox. See ‘Write and send messages’, p. 69.Retrieve e-mail messagesIf you are offline, select Options > Connect to start a connection to the remote mailbox. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1When you have an open connection to a remote mailbox, select Options > Retrieve e-mail and one of the following:New—to retrieve all new messagesSelected—to retrieve only the messages that have been markedAll—to retrieve all messages from the mailboxTo stop retrieving messages, select Cancel.2If you want to close the connection and view the e-mail messages offline, select Options > Disconnect.R1136_en.book  Page 72  Friday, March 2, 2007  9:42 AM
Messaging733To open an e-mail message, press . If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.To view e-mail attachments, open the message, and select the attachment field indicated by   . If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.Retrieve e-mail messages automaticallyTo retrieve messages automatically, select Options > E-mail settings > Automatic retrieval. For more information, see ‘Automatic retrieval’, p. 77.Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Delete e-mail messagesTo delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete message from:, select Phone only.The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status.To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete message from:, select Phone and server.To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Restore.Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1In the Messaging main view, select Options > SIM messages.2Select Options > Mark/Unmark > Mark or Mark all to mark messages.3Select Options > Copy. A list of folders opens.R1136_en.book  Page 73  Friday, March 2, 2007  9:42 AM
Messaging744To start copying, select a folder and OK. To view the messages, open the folder.Messaging settingsFill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.Some or all message centers or access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them.Text messagesPress  , and select Messaging > Options > Settings > Text message and from the following:Message centres—View a list of all text message centers that have been defined.Message centre in use—Select which message center is used to deliver text messages.Character encoding— To use character conversion to another encoding system when available, select Reduced support.Receive report—Select whether the network sends delivery reports on your messages (network service).Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the message cannot be sent within the validity period, the message is deleted from the message center.Message sent as—Contact your service provider to learn if your message center is able to convert text messages into these other formats.Preferred connection—Select the connection to be used.Reply via same centre—Select whether you want the reply message to be sent using the same text message center number (network service).Multimedia messagesPress  , and select Messaging > Options > Settings > Multimedia message and from the following:Image size—Define the size of the image in a multimedia message.MMS creation mode —If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. If you select Restricted, the device prevents you from sending messages that may not be supported. To include content in your messages without notifications, select Free.Access point in use—Select which access point is used as the preferred connection.R1136_en.book  Page 74  Friday, March 2, 2007  9:42 AM
Messaging75Multimedia retrieval—Select how you want to receive messages. To receive messages automatically in your home cellular network, select Auto in home netw.. Outside your home cellular network, you receive a notification that there is a message to retrieve in the multimedia message center.Outside your home cellular network, sending and receiving multimedia messages may cost you more.If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home cellular network.Allow anon. msgs.—Select whether you want to reject messages from an anonymous sender.Receive adverts—Define whether you want to receive multimedia message advertisements.Receive report—Select whether you want the status of the sent message to be shown in the log (network service).Deny report sending—Select whether you want to deny your device sending delivery reports of received messages.Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the message cannot be sent within the validity period, the message is deleted from the message center.E-mailPress , and select Messaging > Options > Settings > E-mail.To select which mailbox you want to use for sending e-mail, select Mailbox in use and a mailbox.Select Mailboxes and a mailbox to change the following settings: Connection settings, User settings, Retrieval settings, and Automatic retrieval.To remove a mailbox and its messages from your device, scroll to it, and press  .To create a new mailbox, select Options > New mailbox.Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:User name—Enter your user name, given to you by your service provider.Password—Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.Incoming mail server—Enter the IP address or host name of the mail server that receives your e-mail.Access point in use—Select an internet access point (IAP). See ‘Access points’, p. 103.R1136_en.book  Page 75  Friday, March 2, 2007  9:42 AM
Messaging76Mailbox name—Enter a name for the mailbox.Mailbox type—Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting cannot be changed.Security (ports)—Select the security option used to secure the connection to the remote mailbox.Port—Define a port for the connection.APOP secure login (for POP3 only)—Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:My e-mail address—Enter the e-mail address given to you by your service provider.Outgoing mail server—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your service provider. Contact your service provider for more information.The settings for User name, Password, Access point in use,  Security (ports), and Port are similar to the ones in Incoming e-mail.User settingsMy name—Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.Send message—Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.Send copy to self—Select whether you want to send a copy of the e-mail to your own mailbox.Include signature—Select whether you want to attach a signature to your e-mail messages.New e-mail alerts—Select whether you want to receive the new e-mail indications (a tone, a note, and a mail indicator) when new mail is received.Retrieval settingsE-mail to retrieve—Define which parts of the e-mail are retrieved: Headers only, Partially (kB) (POP3), or Msgs. & attachs. (POP3).Retrieval amount—Define how many new e-mail messages are retrieved to the mailbox.IMAP4 folder path (for IMAP4 only)—Define the folder path for folders to be subscribed.R1136_en.book  Page 76  Friday, March 2, 2007  9:42 AM
Messaging77Folder subscriptions (for IMAP4 only)—Subscribe to other folders in the remote mailbox and retrieve content from those folders.Automatic retrievalE-mail notifications—To automatically retrieve the headings to your device when you receive new e-mail in your remote mailbox, select Auto-update or Only in home netw..E-mail retrieval—To automatically retrieve the headings of new e-mail messages from your remote mailbox at defined times, select Enabled or Only in home netw.. Define when and how often the messages are retrieved.E-mail notifications and E-mail retrieval cannot be active at the same time.Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Web service messagesPress  , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.Cell broadcastCheck the available topics and related topic numbers with your service provider. Press  , and select Messaging > Options > Settings > Cell broadcast and from the following:Reception—Select whether you want to receive cell broadcast messages.Language—Select the languages in which you want to receive messages: All, Selected, or Other.Topic detection—Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.Other settingsPress , and select Messaging > Options > Settings > Other and from the following:Save sent messages—Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder.Number of saved msgs.—Define how many sent messages are saved to the Sent folder at a time. When the limit is reached, the oldest message is deleted.R1136_en.book  Page 77  Friday, March 2, 2007  9:42 AM
Messaging78Memory in use—If a compatible memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card.IM—instant messaging Press  , and select Applications > IM.Instant messaging (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain compatible IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features.Before you can use instant messaging, you must define the settings to access the service that you want to use. You may receive the settings in a special text message from the service provider that offers the IM service.For more information on instant messaging, see the guides for your device at www.nokia.com/support or your local Nokia website.R1136_en.book  Page 78  Friday, March 2, 2007  9:42 AM
Make calls79Make callsVoice calls1In the standby mode, enter the phone number, including the area code. To remove a number, press  . For international calls, press   twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.2Press   to call the number.3Press   to end the call (or to cancel the call attempt). Pressing   always ends a call, even if another application is active. Closing the fold does not end an active voice call.To adjust the volume during a call, use the volume keys on the side of your device. If you have set the volume to Mute, select Unmute first.To make a call from Contacts, press  , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts are listed. To call, press  .You must copy the contacts from your SIM card to Contacts before you can make a call this way. See ‘Copy contacts’, p. 86.To call a recently dialed number in the standby mode, press  . Scroll to the number, and press  .To send DTMF tone strings (for example, a password), select Options > Send DTMF. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press   repeatedly. Select OK to send the tone. You can add DTMF tones to the Phone number or DTMF fields in a contact card.To put an active voice call on hold while answering another incoming call, select Options > Hold. To switch between the active and the held call, select Options > Swap. To connect the active and held calls and drop yourself from the line, select Options > Transfer. Tip! When you have only one active voice call, to put the call on hold, press  . To activate the call, press   again.During an active call, to route the sound from the handset to the loudspeaker, select Activate loudspeaker. If you have attached a compatible headset with Bluetooth connectivity, to route the sound to the headset, select Options > Activate handsfree. To switch back to the handset, select Options > Activate handset.R1136_en.book  Page 79  Friday, March 2, 2007  9:42 AM
Make calls80To end an active call and replace it by answering the waiting call, select Options > Replace.If you have several calls active, to end them all, select Options > End all calls.Many of the options that you can use during a voice call are network services.Voice mailboxTo call your voice mailbox (network service), press and hold   in the standby mode. See also ‘Call divert’, p. 101.To change the phone number of your voice mailbox, press , and select Tools > call mailbox > Options > Change number. Enter the number (obtained from your wireless service provider), and select OK.Make a conference call1Make a call to the first participant.2To make a call to another participant, select Options > New call. The first call is automatically put on hold.3When the new call is answered, to join the first participant in the conference call, select Options > Conference.To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4To end the active conference call, press  .Speed dial a phone numberTo activate speed dialing, press  , and select Tools > Settings > Phone > Call > Speed dialling > On.To assign a phone number to one of the speed dialing keys ( — ), press  , and select Tools > Speed dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign.   is reserved for the voice mailbox, and   for starting the web browser. To call in the standby mode, press the speed dial key and .R1136_en.book  Page 80  Friday, March 2, 2007  9:42 AM
Make calls81Voice dialingYour device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, scroll to the number with a voice tag, and select Options > Play voice tag.Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.1To start voice dialing, in the standby mode, press and hold the right selection key. If a compatible headset with the headset key is attached, press and hold the headset key to start voice dialing.2A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.3The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 2.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches or Quit to cancel voice dialing.If several numbers are saved under the name, the device selects the default number if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business).Answer or decline a callTo answer the call, press  . If Answer if fold opened is set to Yes in settings, open the fold.To mute the ringing tone when a call comes in, select Silence.If you do not want to answer a call, press  . If you have activated the Call divert > If busy function to divert calls, declining an incoming call also diverts the call. See ‘Call divert’, p. 101.R1136_en.book  Page 81  Friday, March 2, 2007  9:42 AM
Make calls82When you select Silence to mute the ringing tone of the incoming call, you can send a text message without rejecting the call informing the caller that you cannot answer the call. Select Options > Send text message. To set up this option and write a standard text message, see ‘Call’, p. 100.Call waitingYou can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Phone > Call > Call waiting (network service).To answer the waiting call, press  . The first call is put on hold.To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer. To end the active call, press  . To end both calls, select Options > End all calls.Log To monitor the phone numbers of missed, received, and dialed voice calls, press  , and select Applications > Log >Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area.To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press  .Call duration To monitor the approximate duration of your incoming and outgoing calls, press  , and select Applications > Log >Call duration. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To clear call duration timers, select Options > Clear timers. For this you need the lock code. See ‘Phone and SIM card’, p. 97.Packet dataTo check the amount of data sent and received during packet data connections, press  , and select Applications > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.R1136_en.book  Page 82  Friday, March 2, 2007  9:42 AM
Make calls83Monitor all communication eventsIcons in Log are as follows: Incoming Outgoing  Missed communication eventsTo monitor all voice calls, text messages, or data connections registered by the device, press  , select Applications > Log, and press   to open the general log.Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or web pages are shown as packet data connections.To add an unknown phone number from Log to your contacts, select Options > Save to Contacts.To filter the log, select Options > Filter and a filter.To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from the log, press  .To set the log duration, select Options > Settings > Log duration. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. Tip! In the details view, you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy number.To view from the packet data counter how much data is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.Push to talk   Press  , and select Tools > PTT.Push to talk (PTT) (network service) is a real-time voice over IP service implemented over a GSM/GPRS network. Push to talk provides direct voice communication connected with the push of a key. Use push to talk to have a conversation with one person or with a group of people. Before you can use push to talk, you must define the push-to-talk access point and push-to-talk settings. You may receive the settings in a special text message from the service provider that offers the push-to-talk service. You can also use the Sett. wizard application for configuration, if supported by your service provider.In push-to-talk communication, one person talks while the others listen through the built-in loudspeaker. Speakers take turns responding to each other. Because only one group member can talk at any time, the R1136_en.book  Page 83  Friday, March 2, 2007  9:42 AM
Make calls84maximum duration of a speech turn is limited. The maximum duration is usually set to 30 seconds. For details of the speech turn duration for your network, contact your service provider. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Phone calls always take priority over push-to-talk activities.For more information on push to talk, see the guides for your device at www.nokia.com/support or your local Nokia website.R1136_en.book  Page 84  Friday, March 2, 2007  9:42 AM
Contacts (phonebook)85Contacts (phonebook) Press  , and select Contacts. In Contacts you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 71. Contact information can only be sent to or received from compatible devices.To view the amount of contacts, groups, and the available memory in Contacts, select Options > Contacts info.Save and edit names and numbers1Select Options > New contact.2Fill in the fields that you want, and select Done.To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. You can also search for the desired contact by entering the first letters of the name to the search field. A list of the contacts starting with the letters appear on the display. Tip! To add and edit contact cards, you can also use Nokia Contacts Editor available in Nokia Nseries PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options > Add thumbnail. The thumbnail image is shown when the contact calls.To listen to the voice tag assigned to the contact, select a contact card and Options > Play voice tag. See ‘Voice dialing’, p. 81.To send contact information, select the card you want to send and Options > Send > Via text message, Via multimedia, or Via Bluetooth. See ‘Messaging’, p. 68 and ‘Send data using Bluetooth connectivity’, p. 60.To add a contact to a group, select Options > Add to group: (shown only if you have created a group). See ‘Create contact groups’, p. 87.To check to which groups a contact belongs, select the contact and Options > Belongs to groups.To delete a contact card in Contacts, select a card, and press  . To delete several contact cards at the same time, press   and   to mark the contacts, and press   to delete.R1136_en.book  Page 85  Friday, March 2, 2007  9:42 AM
Contacts (phonebook)86Default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1In the address book, select a contact.2Select Options > Defaults.3Select a default to which you want to add a number or an address, and select Assign.4Select a number or an address you want to set as a default.The default number or address is underlined in the contact card.Copy contactsTo copy names and numbers from a SIM card to your device, press  , and select Contacts > Options > SIM contacts > SIM directory, the names you want to copy, and Options > Copy to Contacts.To copy contacts to your SIM card, in Contacts, select the names you want to copy and Options > Copy to SIM directory, or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied. Tip! You can synchronize your contacts to a compatible PC with Nokia Nseries PC Suite. SIM directory and other SIM servicesFor availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor.Press , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dial contacts. This setting is only shown if supported by your SIM card.To restrict calls from your device to selected phone numbers, select Options > Activate fixed dialling. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions.When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.R1136_en.book  Page 86  Friday, March 2, 2007  9:42 AM
Contacts (phonebook)87When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.Add ringing tones for contactsTo define a ringing tone for a contact or a contact group, do the following:1Press   to open a contact card or go to the groups list, and select a contact group.2Select Options > Ringing tone. A list of ringing tones opens.3Select the ringing tone you want to use for the individual contact or the selected group. You can also use a video clip as a ringing tone.When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).To remove the ringing tone, select Default tone from the list of ringing tones.Create contact groups1In Contacts, press   to open the groups list.2Select Options > New group. 3Write a name for the group or use the default name, and select OK. 4Select the group, and Options > Add members.5Scroll to a contact, and press   to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.6Select OK to add the contacts to the group.To rename a group, select Options > Rename, enter the new name, and select OK.Remove members from a group1In the groups list, select the group you want to modify.2Scroll to the contact, and select Options > Remove from group.3Select Yes to remove the contact from the group.R1136_en.book  Page 87  Friday, March 2, 2007  9:42 AM
Office88OfficeCalculator Press  , and select Office > Calculator.Note: This calculator has limited accuracy and is designed for simple calculations.Adobe Reader With Adobe Reader, you can read .pdf documents on the display of your device.This application has been optimized for .pdf document content on handsets and other mobile devices, and provides only a limited set of features compared with PC versions.To open documents, press  , and select Office > Adobe PDF. Your recent files are listed in the file view. To open a document, scroll to it, and press  .Use File mgr. to browse and open documents stored in the device memory and on  a compatible memory card (if inserted).More informationFor more information, visit www.adobe.com.To share questions, suggestions, and information about the application, visit the Adobe Reader for Symbian OS user forum at http://adobe.com/support/forums/main.html.Converter To convert measures from one unit to another, press  , and select Office > Converter.Converter has limited accuracy, and rounding errors may occur.1In the Type field, select the measure you want to use.2In first Unit field, select the unit from which you want to convert. In the next Unit field, select the unit to which you want to convert.3In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.R1136_en.book  Page 88  Friday, March 2, 2007  9:42 AM
Office89Set base currency and exchange ratesSelect Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1.Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.Notes To write notes in .txt format, press  , and select Office > Notes.Recorder To record voice memos, press  , and select Office > Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.Wireless Keyboard To set up a compatible wireless keyboard supporting the Bluetooth human interface devices (HID) profile for use with your device, use the Wireless keybd. application. The keyboard enables you to enter text in comfort, using the full QWERTY layout, for text messages, e-mail, and calendar entries.1Activate Bluetooth connectivity on your device.2Switch on the keyboard.3Press , and select Office > Wireless keybd.. 4Select Options > Find keyboard to start searching for devices with Bluetooth connectivity.5Select the keyboard from the list, and press   to start the connection.6To pair the keyboard with your device, enter a passcode of your choice (1 to 9 digits) on the device and the same passcode on your keyboard.To enter the digits of the passcode, you may need to press the Fn key first.7If you are asked for a keyboard layout, select it from a list on your device.8When the name of the keyboard appears, its status changes to Keyboard connected, and the green indicator of your keyboard blinks slowly; the keyboard is ready for use.For details on the operation and maintenance of your keyboard, see its user guide.R1136_en.book  Page 89  Friday, March 2, 2007  9:42 AM
Tools90ToolsApplication manager Press  , and select Tools > App. mgr.. You can install two types of applications and software to your device:•J2ME™ applications based on Java™ technology with the extension .jad or .jar ( ). • Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis or .sisx extension. Only install software specifically designed for your Nokia N76. Software providers will often refer to the official model number of this product: the Nokia N76-1.Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity. You can use Nokia Application Installer in Nokia Nseries PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk).Install applications and software   indicates a .sis application,   a Java application,   that the application is not fully installed, and   that the application is installed on the memory card.Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java Verified™ testing.Before installation, note the following:• To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details.To display the security certificate details of the application, in Certificates, select View details. See ‘Certificate management’, p. 98.• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.R1136_en.book  Page 90  Friday, March 2, 2007  9:42 AM
Tools91• The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.1To locate an installation file, press  , and select Tools > App. mgr.. Alternatively, search the device memory or a compatible memory card (if inserted) in File mgr., or open a message in Messaging > Inbox that contains an installation file.2In App. mgr., select Options > Install. In other applications, scroll to the installation file, and press    to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.To start an installed application, locate it in the menu, and press  . If the application does not have a default folder defined, it is installed in the Applications folder.To see which software packages are installed or removed and when, select Options > View log.Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning.After you install applications to a compatible memory card, installation files (.sis) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files. To maintain sufficient memory, use Nokia Nseries PC Suite to back up installation files to a compatible PC, then use the file manager to remove the installation files from the device memory. See ‘File manager’, p. 19. If the .sis file is a message attachment, delete the message from the Messaging inbox.Remove applications and softwareScroll to a software package, and select Options > Remove. Select Yes to confirm.If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.If another software package depends on the software package that you removed, the other software package R1136_en.book  Page 91  Friday, March 2, 2007  9:42 AM
Tools92may stop working. Refer to the documentation of the installed software package for details.SettingsSelect Options > Settings and from the following:Software installation—Select whether Symbian software that has no verified digital signature can be installed.Online certificate check—Select to check the online certificates before installing an application.Default web address—Set the default address used when checking online certificates.Some Java applications may require a message to be sent or a network connection to a specific access point for downloading extra data or components. In the App. mgr. main view, scroll to an application, and select Options > Open to change settings related to that specific application.Digital rights management Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM 10, OMA DRM 1.0 and OMA DRM 2.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content.Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content.If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia Nseries PC Suite. Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM protected content after the device memory is formatted. You may also need to restore the activation keys in case the files on your device get corrupted.If your device has WMDRM protected content, both the activation keys and the content will be lost if the device memory is formatted. You may also lose the activation keys and the content in case the files on your device get corrupted. Losing the activation keys or the content may R1136_en.book  Page 92  Friday, March 2, 2007  9:42 AM
Tools93limit your ability to use the same content on your device again. For more information, contact your service provider.Some activation keys may be connected to a specific SIM card, and the protected content can be accessed only if the SIM card is inserted in the device.To view the digital rights activation keys stored in your device, press  , and select Tools > Actv. keys and from the following:Valid keys—View keys that are connected to one or more media files and keys whose validity period has not started yet.Invalid keys—View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.Not in use—View keys that have no media files connected to them in the device.To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options > Get new key. Activation keys cannot be updated if web service message reception is disabled. See ‘Web service messages’, p. 71.To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press .Voice commands You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see ‘Voice dialing’, p. 81.To activate enhanced voice commands for starting applications and profiles, you must open the Voice comm. application and its Profiles folder. Press  , and select Tools > Voice comm. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold   in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list. To use enhanced voice commands when the fold is closed, press and hold the forward key.To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms.To listen to the synthesized voice tag, select Options > Playback.To change voice command settings, select Options > Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesiser > Off. To reset voice R1136_en.book  Page 93  Friday, March 2, 2007  9:42 AM
Tools94recognition learning, for example, when the main user of the device has changed, select Remove voice adapts..PositioningPress  , and select Applications > GPS data or Landmarks.The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals.GPS should only be used as a navigation aid. It should not be used for precise location measurement and you should never rely solely on location data from the GPS receiver for positioning or navigation.The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals.With Landmarks, you can save and view the position information of specifc locations in your device. With GPS data, you can access route guidance information to a selected destination, position information about your current location, and traveling information, such as the approximate distance to the destination and approximate duration of travel.Landmarks and GPS data may be network based (network service) or they may require that you use a compatible GPS receiver.For more information on Landmarks and GPS data, see the guides for your device at www.nokia.com/support or your local Nokia website.R1136_en.book  Page 94  Friday, March 2, 2007  9:42 AM
Settings95Settings To change settings, press  , and select Tools > Settings. Scroll to General, Phone, Connection, or Applications, and press  . Scroll to a setting or setting group you want to change, and press  .Some settings may be preset for the device by your service provider, and you may not be able to change them.General To edit the general settings of your device or restore the original default device settings, press  , and select Tools > Settings > General  > Personalisation, Date and time, Cover display, Enhancement, Security, Factory settings, or Positioning.For Date and time, see ‘Clock’, p.  66.PersonalisationTo edit settings related to the display, standby mode, and general functionality of your device, press  , and select Tools > Settings > General > Personalisation.Tones allows you to change the tones of calendar, clock, and the currently active profile.Themes opens the application. See ‘Change the look of your device’, p. 49.Voice comms. opens the settings for the application. See ‘Voice commands’, p. 93.DisplayLight sensor—Press   or   to adjust the light sensor that observes the lighting conditions and adjusts the brightness of the display. The light sensor may cause the display to flicker in low light.Font size—Adjust the size of the text and icons on the display.Power saver time-out—Select the time-out period after which the power saver is activated.Welcome note / logo—The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.Light time-out—Select a time-out after which the backlight of the display is switched off.R1136_en.book  Page 95  Friday, March 2, 2007  9:42 AM
Settings96Standby modeActive standby—Use shortcuts to applications in the standby mode. See ‘Active standby mode’, p. 50.Active standby apps.—Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.Shortcuts > Left selection key and Right selection key—Assign a shortcut to the selection keys in the standby mode.You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the active standby is on.Operator logo—This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.LanguagePhone language—Changing the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.Changing the settings for Phone language or Writing language affects every application in your device, and the change remains effective until you change these settings again.Writing language—Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used.Predictive text—Set the predictive text input On or Off for all editors in the device. The predictive text dictionary is not available for all languages.Cover displayBrightness—Close the fold, and use the volume key to adjust the brightness on the cover display.Answer if fold opened—Select Yes if you want to answer incoming calls by opening the fold.Sleep mode—Select whether the display is switched off to save battery power after the power saver is activated. When the display is switched off, an LED blinks to indicate that the device is powered on.EnhancementFor enhancement indicators, see ‘Essential indicators’, p. 17. Some enhancement connectors do not indicate which type of an enhancement is connected to the device.R1136_en.book  Page 96  Friday, March 2, 2007  9:42 AM
Settings97The available settings depend on the type of enhancement. Select an enhancement and from the following:Default profile—Set the profile that you want activated each time you connect a certain compatible enhancement to your device. See ‘Profiles—set tones’, p. 48.Automatic answer—Set if you want the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled.Lights—Set whether lights remain on, or are switched off after the time-out. This setting is not available for all enhancements.If you are using a Text phone or a Loopset, you must activate it on your device. To activate Text phone, select Text phone > Use text phone > Yes. To activate the loopset, select Loopset > Use loopset > Yes.SecurityTo edit settings related to the security,  press  , and select Tools > Settings > General > Security > Phone and SIM card, Certificate management, or Security module.Phone and SIM cardPIN code request—When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards.PIN code, PIN2 code, and Lock code—You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of these codes, contact your service provider. See ‘Glossary of PIN and lock codes’, p. 98.Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.Keypad autolock period—Select whether the keypad is  locked when your device has been idle for a certain period of time.Tip! To lock or unlock the keypad manually, press  , then Phone autolock period—To avoid unauthorized use, you can set a time-out after which the device automatically locks. A locked device cannot be used until the correct lock code is entered. To turn off the autolock period, select None.See ‘Glossary of PIN and lock codes’, p. 98.When the device is locked, calls may be possible to the official emergency number programmed into your device.Tip! To lock the device manually, press  . A list of commands opens. Select Lock phone.R1136_en.book  Page 97  Friday, March 2, 2007  9:42 AM
Settings98Lock if SIM card changed—You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.Closed user group—You can specify a group of people to whom you can call and who can call you (network service).When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.Confirm SIM services—You can set the device to display confirmation messages when you are using a SIM card service (network service).Glossary of PIN and lock codesIf you forget any of these codes, contact your service provider.Personal identification number (PIN) code—This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.Lock code (also known as security code)—This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider.Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.Certificate managementDigital certificates do not guarantee safety; they are used to verify the origin of software.In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press   to see a list of personal certificates, if available.Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.R1136_en.book  Page 98  Friday, March 2, 2007  9:42 AM
Settings99Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.View certificate details—check authenticityYou can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:Certificate not trusted—You have not set any application to use the certificate. See ‘Change the trust settings’, p. 99.Expired certificate—The period of validity has ended for the selected certificate.Certificate not valid yet—The period of validity has not yet begun for the selected certificate.Certificate corrupted—The certificate cannot be used. Contact the certificate issuer.Change the trust settingsBefore changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. Symbian installation: Yes—The certificate is able to certify the origin of a new Symbian operating system application.Internet: Yes—The certificate is able to certify servers.App. installation: Yes—The certificate is able to certify the origin of a new JavaTM application.Select Options > Edit trust setting to change the value.R1136_en.book  Page 99  Friday, March 2, 2007  9:42 AM
Settings100Security moduleTo view or edit a security module (if available) in Security module, scroll to it, and press  . To view detailed information about a security module, scroll to it, and select Options > Security details.Factory settingsTo reset some of the settings to their original values, select  Tools > Settings > General > Factory settings. To do this, you need the lock code. See ‘Phone and SIM card’, p. 97. After resetting, the device may take a longer time to power on. Documents and files are unaffected.PositioningSelect the used Positioning methods to detect the location of your device: Bluetooth GPS to use a compatible external GPS receiver with Bluetooth connectivity, and Network based to use information from the cellular network (network service). The location information can be used by compatible applications in your device.Phone To edit the settings related to making and receiving calls, press , and select Tools > Settings > Phone > Call, Call divert, Call barring, or Network.CallSend my caller ID—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your service provider when you make a subscription (Set by network) (network service).Call waiting—If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).Reject call with SMS—Select Yes to send a text message to a caller informing why you could not answer the call. See ‘Answer or decline a call’, p. 81.Message text—Write a text to be sent in a text message when you reject a call.Automatic redial—Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press .R1136_en.book  Page 100  Friday, March 2, 2007  9:42 AM
Settings101Show call duration—Activate this setting if you want the length of a call to be displayed during the call.Summary after call—To have the duration of a call briefly displayed after the call, select On.Speed dialling—Select On, and the numbers assigned to the speed dialing keys ( – ) can be dialed by pressing and holding the key. See also ‘Speed dial a phone number’, p. 80.Anykey answer—Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and .Line in use—This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected,   is shown in the standby mode. Tip! To switch between the phone lines, press and hold   in the standby mode.Line change—To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.Call divertCall divert allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.Select which calls you want to divert and the desired diverting option. To divert voice calls when your number is busy or when you reject incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).Several diverting options can be active at the same time. When all calls are diverted,   is shown in the standby mode.Call barring and call diverting cannot be active at the same time.Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider.Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.R1136_en.book  Page 101  Friday, March 2, 2007  9:42 AM
Settings102Call barring and call diverting cannot be active at the same time.When calls are barred, calls may be possible to certain official emergency numbers.NetworkOperator selection—Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home cellular network. Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.Cell info display—Select On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.Connection To edit access point and other connection settings, press , and select Tools > Settings > Connection > Bluetooth, USB, Access points, Packet data, Data call, SIP settings, Configurations, or Access point name control.For USB settings, see ‘USB’, p. 62.For Bluetooth settings, see ‘Settings’, p. 60.Data connections and access pointsYour device supports packet data connections (network service), such as GPRS in the GSM network. When you use your device in a GSM network, multiple data connections can be active at the same time, and access points can share a data connection.To establish a data connection, an access point is required. You can define different kinds of access points, such as:• MMS access point to send and receive multimedia messages• Internet access point (IAP) to send and receive e-mail and connect to the internetCheck the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your service provider.R1136_en.book  Page 102  Friday, March 2, 2007  9:42 AM
Settings103Access pointsYou may receive access point settings in a message from a service provider. See ‘Data and settings’, p. 71. Some or all access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them.   indicates a protected access point, and  indicates a packet data access point.To create a new access point, select Options > New access point.To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.Connection name—Enter a descriptive name for the connection.Data bearer—Select the data connection type.Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.Packet data access pointsFollow the instructions from your service provider.Access point name—You obtain the access point name from your service provider.User name—The user name may be needed to make a data connection, and is usually provided by the service provider.Prompt password—If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.Password—A password may be needed to make a data connection, and is usually provided by the service provider.Authentication—Select Normal or Secure.Homepage—Depending on the access point you are setting up, enter the web address or the address of the multimedia messaging center.Select Options > Advanced settings to change the following settings:Network type—Select the internet protocol type to use: IPv4 or IPv6. The other settings depend on the selected network type.Phone IP address (for IPv4 only)—Enter the IP address of your device. DNS address—In Primary DNS address, enter the IP address of the primary DNS server. In Secondary DNS R1136_en.book  Page 103  Friday, March 2, 2007  9:42 AM
Settings104address, enter the IP address of the secondary DNS server. Contact your internet service provider to obtain these addresses.Proxy server address—Define the address for the proxy server.Proxy port number—Enter the proxy port number.Packet dataThe packet data settings affect all access points using a packet data connection.Packet data connection—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.Access point—The access point name is needed to use your device as a packet data modem to your computer.Data callThe data call settings affect all access points using a GSM data call connection.Online time—Set the data calls to automatically disconnect after a time-out if there is no activity. To enter a time-out, select User defined, and enter the time in minutes. if you select Unlimited, data calls are not automatically disconnected.SIP settingsSIP (session initiation protocol) settings are needed for certain network services using SIP. You may receive the settings in a special text message from your service provider. You can view, delete, or create these setting profiles in SIP settings.ConfigurationsYou may receive trusted server settings from your service provider in a configuration message. You can save view or delete these settings in Configurations.Access point name controlWith Access point name control service, you can restrict packet data connections and allow your device to use only certain packet data access points.This setting is only available if your SIM card supports the access point control service.R1136_en.book  Page 104  Friday, March 2, 2007  9:42 AM
Settings105To set the control service on or off or to change the allowed access points, select Options and the corresponding option. To change the options, you need your PIN2 code. Contact your service provider for the code.Applications To edit the settings of some of the applications in your device, press  , and select Tools > Settings > Applications. The settings are also available in each application by selecting the settings option.R1136_en.book  Page 105  Friday, March 2, 2007  9:42 AM
Troubleshooting: Q&A106Troubleshooting: Q&AAccess codesQ: What is my password for the lock, PIN, or PUK codes?A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer.If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your wireless service provider.For information about passwords, contact your access point provider, for example, a commercial internet service provider (ISP) or wireless service provider.BatteryQ: Why does my battery drain fast?A: Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce battery life time.Also packet data connections increase the demand on battery power. If you have set Packet data connection to When available in Connection settings, and there is no packet data coverage (GPRS), your device periodically tries to establish a packet data connection, which causes the increased demand on battery power.To prolong the operating time of your device, turn the Bluetooth technology off when you do not need it. Also set Packet data connection to When needed. To close all the applications that are running in the background, and you do not use, press and hold  , and select the applications from the list. Then exit the application.Application not respondingQ: How do I close an application that is not responding?A: Press and hold  . Scroll to the application, and press   to close the application.Bluetooth connectivityQ: Why can’t I find my friend’s device?A: Check that both devices are compatible, have activated Bluetooth connectivity, and are not in hidden mode. Check also that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, you can either end the connection using the other device or by deactivating Bluetooth connectivity. Select Tools > Bluetooth > Bluetooth > Off.CameraQ: Why do images look smudgy?A: Ensure that the camera lens protection windows are clean.DisplayR1136_en.book  Page 106  Friday, March 2, 2007  9:42 AM
Troubleshooting: Q&A107Q: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.Memory lowQ: What can I do if my device memory is low?A: You can delete unused items saved in your device regularly to avoid memory getting low. See ‘Memory low—free memory’, p. 20. To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data from phone memory., try deleting items one by one (starting from the smallest item).To view what kind of data you have and how much memory the different data groups consume, press  , and select Tools > File manager > Options > Memory details.Q: How can I save my data before deleting it?A: Save your data using one of the following methods:• Use Nokia Nseries PC Suite to make a backup copy of all data to a compatible computer.• Send images to your e-mail address, then save the images to your computer.• Send data using Bluetooth connectivity to a compatible device.• Store data on a compatible memory card.MessagingQ: Why can’t I select a contact?A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.Multimedia messagingQ: The note Retrieving message is shown briefly. What is happening? A: The device is trying to retrieve a multimedia message from the multimedia messaging center.Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Press  , and select Messaging > Options > Settings > Multimedia msg..Q: How can I end the data connection when the device starts a data connection again and again?A: To stop the device from making a data connection, press , and select Messaging > Options > Settings > Multimedia message > Multimedia retrieval and one of the following:Manual—to have the multimedia messaging center save messages to be retrieved later. You receive a notification when there is a new multimedia message that you can retrieve in the multimedia message center.R1136_en.book  Page 107  Friday, March 2, 2007  9:42 AM
Troubleshooting: Q&A108Off—to ignore all incoming multimedia messages. After this change, the device does not make any network connections related to multimedia messaging. PC connectivityQ: Why do I have problems in connecting the device to my PC?A: Make sure that Nokia Nseries PC Suite is installed and running on your PC. See the user guide for Nokia Nseries PC Suite on the CD-ROM. For further information on how to use Nokia Nseries PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokia.com.Q: Can I use my device as a fax modem with a compatible PC?A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to another phone number.R1136_en.book  Page 108  Friday, March 2, 2007  9:42 AM
Battery information109Battery informationCharging and dischargingYour device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help.Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it R1136_en.book  Page 109  Friday, March 2, 2007  9:42 AM
Battery information110from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic, original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.Authenticate hologram1  When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4  Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276.To create a text message,• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.• For India only: Enter Battery followed by the 20-digit battery code, for example, Battery 12345678919876543210, and send to 5555.National and international operator charges will apply.R1136_en.book  Page 110  Friday, March 2, 2007  9:42 AM
Battery information111You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery. R1136_en.book  Page 111  Friday, March 2, 2007  9:42 AM
Care and maintenance112Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep, such as contacts and calendar notes.• To reset the device from time to time for optimum performance, power off the device and remove the battery.These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.R1136_en.book  Page 112  Friday, March 2, 2007  9:42 AM
Additional safety information113Additional safety informationSmall childrenYour device and its enhancements may contain small parts. Keep them out of the reach of small children.Operating environmentThis device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Implanted medical devices Manufacturers of medical devices recommend that a minimum separation of 15.3 centimeters (6 inches) should be maintained between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should:• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on.• Do not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the medical device to minimize the potential for interference.• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.R1136_en.book  Page 113  Friday, March 2, 2007  9:42 AM
Additional safety information114• Read and follow the directions from the manufacturer of the implanted medical device.If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.R1136_en.book  Page 114  Friday, March 2, 2007  9:42 AM
Additional safety information115Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call: 1If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device.2Press the end key as many times as needed to clear the display and ready the device for calls. 3Enter the official emergency number for your present location. Emergency numbers vary by location.4Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in the offline or flight profile mode, you may need to change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.Certification information (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.95 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.R1136_en.book  Page 115  Friday, March 2, 2007  9:42 AM
Additional safety information116Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.22 W/kg and when properly worn on the body is 1.15 W/kg. Information about this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: OW3RM-149.R1136_en.book  Page 116  Friday, March 2, 2007  9:42 AM

Navigation menu