Microsoft RM-149 GSM Cellular Phone with BT User Manual Manual
Microsoft Mobile Oy GSM Cellular Phone with BT Manual
Manual
Nokia N76 User guide
XXXXXXX
ISSUE 1 EN
R1136_en.book Page 1 Friday, March 2, 2007 9:42 AM
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-149 product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/
EC. A copy of the Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nseries, N76, Navi and Visual Radio are
trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound
mark of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
This product includes software licensed from Symbian
Software Ltd (c) 1998-2007. Symbian and Symbian OS are
trademarks of Symbian Ltd.
Java and all Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2007. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information, including that related to
promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes and improvements to any of the products described in this document
without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR
ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these
products may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.
The third-party applications provided with your device may have been created and
may be owned by persons or entities not affiliated with or related to Nokia. Nokia
does not own the copyrights or intellectual property rights to the third-party
applications. As such, Nokia does not take any responsibility for end-user support,
functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
0434
R1136_en.book Page 2 Friday, March 2, 2007 9:42 AM
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Issue 1 EN, XXXXXXX
R1136_en.book Page 3 Friday, March 2, 2007 9:42 AM
Contents
For your safety...........................................7
Get connected..........................................10
Support .....................................................11
Nokia support and contact information....................... 11
Help ....................................................................................... 11
Get started............................................................................ 11
Additional applications ..................................................... 11
Your Nokia N76.......................................12
Software updates................................................................ 12
Settings.................................................................................. 12
Welcome................................................................................ 12
Modes..................................................................................... 12
Keys and navigation...........................................................14
Transfer content from another device .......................... 16
Essential indicators.............................................................17
Power saver LED.................................................................. 17
Volume and loudspeaker control.................................... 18
Keypad lock (keyguard) ..................................................... 18
Headset.................................................................................. 18
Memory card ........................................................................ 19
File manager ........................................................................19
Media applications ..................................21
Music player ........................................................................ 21
Visual Radio ......................................................................... 25
RealPlayer ............................................................................ 27
Adobe Flash Player ............................................................ 28
Nokia Lifeblog ..................................................................... 28
Camera......................................................29
Take pictures ........................................................................29
Still image camera indicators.......................................... 30
Active toolbar....................................................................... 31
After taking a picture ........................................................31
Still image camera settings.............................................. 32
Flash........................................................................................ 33
Setup settings—color and lighting................................. 33
Scenes .................................................................................... 34
Take pictures in a sequence.............................................34
You in the picture—self-timer.........................................35
Record videos....................................................................... 35
Gallery .....................................................38
R1136_en.book Page 4 Friday, March 2, 2007 9:42 AM
View and browse files ........................................................38
Print Basket...........................................................................40
Albums....................................................................................40
Free memory .........................................................................40
Image print............................................................................41
Print online............................................................................42
Online sharing ......................................................................42
Edit images............................................................................42
Edit video clips .....................................................................43
Slide show .............................................................................45
Presentations........................................................................45
Movie director......................................................................45
Personalize your device .......................... 48
Profiles—set tones ..............................................................48
Change the look of your device .....................................49
Active standby mode..........................................................50
Web browser .......................................... 52
Connection security............................................................52
Bookmarks view...................................................................52
Browse the web ...................................................................53
End connection ....................................................................56
Settings ..................................................................................57
Connections............................................. 59
Connection manager .........................................................59
Bluetooth connectivity .....................................................59
USB ........................................................................................62
PC connections ....................................................................63
Synchronization ..................................................................63
Device manager ..................................................................63
Download! ...............................................64
Settings for Download!......................................................64
Time management ...................................66
Clock ......................................................................................66
Calendar ...............................................................................66
Messaging ...............................................68
Text modes............................................................................69
Write and send messages .................................................69
Inbox—receive messages ..................................................70
Mailbox .................................................................................72
View messages on a SIM card.........................................73
Messaging settings.............................................................74
IM—instant messaging .....................................................78
Make calls ................................................79
Voice calls .............................................................................79
Answer or decline a call....................................................81
Log ..........................................................................................82
R1136_en.book Page 5 Friday, March 2, 2007 9:42 AM
Push to talk ......................................................................... 83
Contacts (phonebook) ............................85
Save and edit names and numbers................................85
Copy contacts ...................................................................... 86
Add ringing tones for contacts ....................................... 87
Create contact groups....................................................... 87
Office........................................................88
Calculator .............................................................................88
Adobe Reader ...................................................................... 88
Converter .............................................................................. 88
Notes .....................................................................................89
Recorder ...............................................................................89
Wireless Keyboard .............................................................89
Tools..........................................................90
Application manager ........................................................ 90
Digital rights management ............................................. 92
Voice commands ................................................................ 93
Positioning ............................................................................ 94
Settings ...................................................95
General .................................................................................. 95
Positioning ..........................................................................100
Phone ..................................................................................100
Connection ........................................................................102
Applications .......................................................................105
Troubleshooting: Q&A ......................... 106
Battery information ............................. 109
Charging and discharging...............................................109
Nokia battery authentication guidelines ...................109
Care and maintenance ......................... 112
Additional safety information............. 114
Index ...................................................... 117
R1136_en.book Page 6 Friday, March 2, 2007 9:42 AM
7
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the device
on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
USE SENSIBLY Use only in the positions as
explained in the product documentation. Do
not touch the antenna areas unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make back-
up copies or keep a written record of all
important information stored in your device.
R1136_en.book Page 7 Friday, March 2, 2007 9:42 AM
8
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. Press the end key as many times as
needed to clear the display and return to the
standby mode. Enter the emergency number,
then press the call key. Give your location. Do
not end the call until given permission to do
so.
About your device
The wireless device described in this guide is approved for
use on the GSM 850, 900, 1800, and 1900 networks.
Contact your service provider for more information about
networks.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device may
be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise caution
and open messages, accept connectivity requests,
download content, and accept installations only from
trustworthy sources. To increase the security of your
device, consider installing, using, and regularly updating
antivirus software, firewall, and other related software on
your device and any connected computer.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
97, 2000, and XP). Not all file formats can be viewed or
modified.
During extended operation, such as a high-speed data
connection, the device may feel warm. In most cases, this
condition is normal. If you suspect the device is not
working properly, take it to the nearest authorized service
facility.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other third-
party sites through your device. Third-party sites are not
R1136_en.book Page 8 Friday, March 2, 2007 9:42 AM
9
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
The images in this guide may differ from your device
display.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider can
give you instructions and explain what charges will apply.
Some networks may have limitations that affect how you
can use network services. For instance, some networks may
not support all language-dependent characters and
services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as MMS, browsing, and e-mail require network
support for these technologies.
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a AC-3, or AC-4 charger and from an AC-
1, ACP-8, ACP-9, ACP-12, or LCH-12 charger when used
with a CA-44 charger adapter.
The battery intended for use with this device is BL-4B.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
R1136_en.book Page 9 Friday, March 2, 2007 9:42 AM
Get connected
10
Get connected
Use your device on the 2G network. See ‘About your
device’, p. 8.
Use Bluetooth technology to transfer files and connect to
compatible enhancements. See ‘Bluetooth connectivity’, p.
59.
Use the Nokia AV Connector (3.5 mm) to connect to
compatible headsets and headphones. See ‘Headset’, p. 18.
Use a compatible data cable, for example the Nokia
Connectivity Cable DKE-2, to connect to compatible
devices, such as printers and PCs. See ‘USB’, p. 62.
Use a compatible microSD card to transfer data or back up
information. See ‘Memory card tool’, p. 19.
R1136_en.book Page 10 Friday, March 2, 2007 9:42 AM
Support
11
Support
Model number: Nokia N76-5
Hereinafter referred to as Nokia N76.
Nokia support and contact
information
Check www.nokia.com/support or your local Nokia website
for the latest version of this guide, additional information,
downloads, and services related to your Nokia product.
On the website, you can get information on the use of
Nokia products and services. If you need to contact
customer service, check the list of local Nokia contact
centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service
center at www.nokia.com/repair.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools > Help.
Select the desired application to view its help topics.
Get started
See the get started guide for keys and parts information
and instructions for setting up the device for use.
Additional applications
There are various applications provided by Nokia and
different third-party software developers to help you do
more with your Nokia N76. These applications are
explained in the guides that are available at the Nokia
N76 product support pages at www.nokia.com/support or
your local Nokia website.
R1136_en.book Page 11 Friday, March 2, 2007 9:42 AM
Your Nokia N76
12
Your Nokia N76
Software updates
Nokia may produce software updates that may offer new
features, enhanced functions, or improved performance.
You may be able to request these updates through the
Nokia Software Updater PC application. To update the
device software, you need the Nokia Software Updater
application and a compatible PC with Microsoft Windows
2000 or XP operating system, broadband internet access,
and a compatible data cable to connect your device to the
PC.
To get more information and to download the Nokia
Software Updater application, visit www.nokia.com/
softwareupdate or your local Nokia web site.
Settings
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured in the
device, based upon your wireless service provider
information. You may have settings from your service
providers already installed in your device, or you may
receive or request the settings from the service providers
as a special message.
To change the general settings in your device, such as
language, the standby mode and display settings, see
‘Phone’, p. 100.
Welcome
When you switch on your device for the first time,
Welcome opens. Select from the following:
Settings wizard—to configure various settings. See the
additional applications leaflet.
Data transfer—to transfer content, such as contacts and
calendar entries, from a compatible Nokia device. See
‘Transfer content from another device’, p. 16.
To open Welcome later, press , and select
Applications > Welcome. You can also access the
individual applications in their own menu locations.
Modes
Your device has two operating modes: with the fold closed
for access to particular features including Music player,
Radio, Camera and Messaging, and with the fold open for
R1136_en.book Page 12 Friday, March 2, 2007 9:42 AM
Your Nokia N76
13
traditional mobile phone use and access to all the features
on your device.
Fold closed—cover display
When the fold is closed, the main display deactivates, and
the cover display lights up. Ongoing calls end, unless the
loudspeaker is in use or a compatible headset is connected.
To change the settings, see ‘Cover display’ p. 50. If you are
using Music player or Visual Radio to listen to a sound
clip, it continues to play.
With the fold closed, the cover display
provides clock and status information. In
the standby mode, the signal strength and
battery indicators, time information, and
the status indicators may be displayed.
If you are using Music player to listen to a
sound clip, volume bars and track
information are displayed. To play, pause,
or play the next or previous sound clip, use
the quick cover keys. To adjust the volume,
use the volume keys.
If you are using Visual Radio with the fold closed, volume
bars and station information are displayed. To turn the
radio on or off and select the next or previous saved
station, use the media keys. To adjust the volume, use the
volume keys.
If you are using Camera with the fold closed, hold the
device in landscape. The outer display becomes the
viewfinder. To activate the camera, press and hold .
To zoom in or out, press the volume keys up or down. To
take a picture, press . To switch between Image
mode and Video mode, press .
To make lighting and color adjustments before taking a
picture, press to activate the toolbar, and use the
volume keys to scroll through the active toolbar. See
‘Setup settings—color and lighting’, p. 33 and ‘Scenes’,
p. 34.
Calendar and clock alarms, notes for missed calls, and new
received messages are also displayed. To view received
text messages and the text and image objects of received
multimedia messages, open the fold, and view the
message on the main display. See ‘Inbox—receive
messages’, p. 70.
Incoming calls are indicated by their normal tone and a
note. In the cover display settings, select Answer if fold
opened to answer a call when you open the fold. If a
compatible headset is connected to the device, press .
To change the settings, see ‘Cover display’, p. 50.
To make calls or use the menu, open the fold.
To lock the keys, see ‘Keypad lock (keyguard)’, p. 18.
R1136_en.book Page 13 Friday, March 2, 2007 9:42 AM
Your Nokia N76
14
Fold open—main display
When you open the fold,
the main display lights up,
the keypad is available, and
you can access the menu.
To access the menu, press
.
The fold opens about 165
degrees, as shown in the
picture. Do not force the
fold to open more.
Keys and navigation
See the get started guide for a complete list of all the keys
and parts in your device.
Menu key
With the menu key, you can access the main menu. In an
open application, press to make the application run
in the background. To switch between open applications,
press and hold .
Navi™ scroll key
Hereinafter referred to as the scroll key.
Use the scroll key to move around the menus ( , ,
, ), and to select items ( ).
Tip! When in the menus, instead of using the scroll
key, you can use the number keys, , and to
quickly access the applications. For example, in the
main menu, press to open Calendar.
Multimedia key
With the multimedia key, you have quick access to
multimedia content and predefined applications.
To open the shortcut assigned to the multimedia key, press
and hold . To open a list of multimedia applications,
press . To open the desired application, use the scroll
key. To exit the list without selecting an application, press
.
To change the shortcuts, press and . To change the
applications that are shown when you press , select
Top, Left, Middle, and Right and the application.
Some shortcuts may be fixed, and you are not able to
change them.
Edit key
To copy and paste text, press and hold to select letters
and words. Press or to highlight text. To copy the
text to clipboard, while still holding , select Copy. To
R1136_en.book Page 14 Friday, March 2, 2007 9:42 AM
Your Nokia N76
15
insert the text into a document, press and hold , and
select Paste.
Edit text and lists
• To mark an item in a list, scroll to it, and press and
at the same time.
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
, then release .
In Messaging, use the edit key to turn predictive text on,
enter in the number mode, insert a symbol, and change the
writing language. See ‘Messaging’, p. 68.
Mode key
The mode key is a multifunction key, allowing you to
switch easily between selected applications, and change
the views within certain applications when the fold is
closed..
With the fold open, press to open the latest photo
in Gallery.
With the fold open, in Gallery, press to switch
between Images & video and thumbnail views.
With the fold closed, in Camera, press to switch
between Image mode and Video mode.
With the fold closed, in Music player, press to
switch between Now playing and Music library.
With the fold closed, in Visual Radio, press to
switch between channel and channel list views.
Tip! To only see the wallpaper on the cover display,
press the mode key twice in the standby mode.
Capture key
Press and hold to activate the main camera in the
fold closed mode. Press to take pictures. See ‘Take
pictures’, p. 29.
In Video mode, press to record video clips. See
‘Record videos’, p. 35.
Quick cover keys
Use the quick cover keys ( , , and ) to
control playback. See ‘Music player’, p. 21, and ‘Visual
Radio’,p. 25.
Use the quick cover keys to lock the keypad with the fold
closed. See ‘Keypad lock (keyguard)’,p. 18.
Press to activate the active toolbar when using the
camera in the fold-closed mode. See ‘Active toolbar’, p. 31.
Volume keys
To control the volume, see ‘Volume and loudspeaker
control’, p. 18.
R1136_en.book Page 15 Friday, March 2, 2007 9:42 AM
Your Nokia N76
16
Use the volume keys to scroll up or down in a list in the
fold-closed mode.
Use the volume keys to zoom in and out when using the
camera. You can also use the volume keys to scroll
through the active toolbar with the fold closed. See
‘Active toolbar’, p. 31.
Transfer content from
another device
You can transfer content, such as contacts, from a
compatible Nokia device to your Nokia N76 using
Bluetooth connectivity. Your device notifies you if the
other device is not compatible.
The type of content that can be transferred depends on
the model of the device from which you want to transfer
content. If the other device supports synchronization, you
can also synchronize data between the other device and
your Nokia N76.
If the other device cannot be powered on without a SIM
card, you can insert your SIM card in it. When Nokia N76
is switched on without a SIM card, the offline profile is
automatically activated.
Transfer content
1To use the application for the first time, on your
Nokia N76, select it in Welcome, or press , and
select Tools > Transfer. If you have used the
application before and want to start a new transfer,
select Transfer data.
2To have Nokia N76 search for devices with Bluetooth
connectivity, select Continue. Select the device from
which you want to transfer content. On your
Nokia N76, enter a code (1–16 digits), and select OK.
Enter the same code on the other device, and select OK.
The devices are now paired. See ‘Pair devices’, p. 61.
For some phone models, the transfer application is sent
to the other device as a message. To install Data
transfer on the other device, open the message, and
follow the instructions on the display.
3From your Nokia N76, select the content you want to
transfer from the other device.
Content is transferred from the memory of the other
device to the corresponding location in your Nokia N76.
Transfer time depends on the amount of data to be
transferred. You can cancel the transfer and continue
later.
If the other device supports synchronization, you can keep
the data up-to-date in both devices. To start a
synchronization with a compatible Nokia device, select
Phones, scroll to the device, and select Options >
Synchronise. Follow the instructions on the display.
R1136_en.book Page 16 Friday, March 2, 2007 9:42 AM
Your Nokia N76
17
The synchronization is two-way. If an item is deleted in
one device, it is deleted in both. You cannot restore deleted
items with synchronization.
To view the log of a previous transfer, select Transfer log.
Essential indicators
The device is being used in a GSM network.
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, and E-mail alert tone are set to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service), a
number indicates the active line.
A compatible headset is connected to the device.
indicates the connection has been lost.
A compatible loopset is connected to the device.
A compatible Text phone is connected to the device.
A data call is active.
A GPRS packet data connection is active. indicates
the connection is on hold and that a connection is
available.
A packet data connection is active in a part of the
network that supports EGPRS. indicates the connection
is on hold and that a connection is available. The icons
indicate that EGPRS is available in the network, but your
device is not necessarily using EGPRS in the data transfer.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your device is
trying to connect with another device.
A USB connection is active.
Power saver LED
The display is switched off to save battery power after the
screen saver is actived. A blue LED in the bottom of the
cover display blinks to indicate that the device is powered
on, but in the sleep mode.
R1136_en.book Page 17 Friday, March 2, 2007 9:42 AM
Your Nokia N76
18
To turn the sleep mode on or off, see ‘Cover display’, p. 96.
Volume and loudspeaker control
To increase or decrease the volume level when you have
an active call or are listening to a sound, press the volume
keys.
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device
to your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudspeaker.
To turn off the loudspeaker, select Options > Activate
handset.
Keypad lock (keyguard)
To lock the keys with the fold closed, press , then
. To unlock the keys, press , then .
To lock the keys with the fold open, press , then .
To unlock the keys, press , then .
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
Headset
You can connect a compatible
headset or compatible headphones to
the Nokia AV Connector (3.5 mm) of
your device. You may need to select
the cable mode.
Do not connect products that create
an output signal as this may cause
damage to the device. Do not connect
any voltage source to the Nokia AV
Connector.
When connecting any external device or any headset,
other than those approved by Nokia for use with this
device, to the Nokia AV Connector, pay special attention to
volume levels.
Warning: When you use the headset, your ability to
hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
To use a headset or headphones with a compatible remote
control unit, for example, the Nokia Audio Controller AD-
43, connect the unit to the connector in the device, then
to the headset or headphones to the unit.
R1136_en.book Page 18 Friday, March 2, 2007 9:42 AM
Your Nokia N76
19
Some headsets do not include a microphone. For phone
calls, use such a headset with a remote control unit or the
microphone of the device.
When using certain headset enhancements, for example
the Nokia Audio Controller AD-43, to adjust the volume
during a call, use the volume key in the device. The Nokia
Audio Controller AD-43 has multimedia volume controls
that are used to adjust the volume only for music or video
playback.
Memory card
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but
some brands may not be fully compatible with this device.
Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Keep all memory cards out of the reach of small children.
Memory card tool
Press , and select Tools > Memory.
To back up information from the device memory to a
compatible memory card (if available), select Options >
Back up phone memory. The device notifies you if the
memory card does not have enough free space to create a
back-up.
To restore information from the compatible memory card
to the device memory, select Options > Restore from
card.
When a memory card is reformatted, all data on the card
is permanently lost. Some memory cards are supplied
preformatted and others require formatting. Consult your
retailer to find out if you must format the memory card
before you can use it.
To format a memory card, select Options > Format
memory card. Select Yes to confirm.
File manager
To browse files and folders in the device memory or on a
compatible memory card (if inserted), press , and select
Tools > File mgr.. The device memory view ( ) opens.
Press to open the memory card view ( ), if
available.
To mark several files, press and hold while you press
, , or . To move or copy the files to a folder,
select Options > Move to folder or Copy to folder.
To find a file, select Options > Find and the memory from
which to search. Enter a search text that matches the file
name.
R1136_en.book Page 19 Friday, March 2, 2007 9:42 AM
Your Nokia N76
20
To view what types of data you have in the device and
how much memory the different data types consume,
select Options > Memory details. The amount of
available free memory is shown in Free memory.
Memory low—free memory
Many features of the device use memory to store data. The
device notifies you if the device or the memory card
memory is low.
To free device memory, transfer data to a compatible
memory card (if available) or to a compatible PC.
To remove data to free memory, use File manager to
delete files you no longer need, or go to the respective
application. For example, you can remove the following:
• Messages in the folders in Messaging and retrieved
e-mail messages from the mailbox
• Saved web pages
• Contact information
•Calendar notes
• Applications shown in App. manager that you do not
need
• Installation files (.sis) of applications you have
installed to a compatible memory card; first back up
the installation files to a compatible PC
R1136_en.book Page 20 Friday, March 2, 2007 9:42 AM
Media applications
21
Media applications
Music player
Music player supports files formats such as AAC, eAAC,
eAAC+, MP3, and WMA. Music player does not necessarily
support all features of a file format or all the variations of
file formats.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
You can listen to music with the fold open or closed. If you
are listening to music when a call comes in, the music
pauses when you answer the call and resumes shortly after
the end of the call.
For how to add songs to your device, see ‘Transfer music’,
p. 23.
For more information about copyright protection, see
‘Digital rights management’, p. 92.
Play music
To play music with the fold open, do the following:
1Press and select Music player.
2In Music menu, select a category such as All songs or
Albums.
3Select the music you want to play.
In Now playing, use the scroll key and the middle
selection key to control playback
• Press to play or pause a song.
• Press to rewind the track or to skip backwards.
• Press to fast forward the track or to skip forward.
• Press to stop playback.
To play music with the fold closed, do the following:
1In standby mode, press to enter Music menu.
2Select the music you want to play, and press .
In Now playing, use the quick cover keys to control
playback:
• Press to play or pause a song.
When you pause a song, a list of the tracks you are
currently listening to is displayed.
• Press to rewind the track or to skip backwards.
• Press to fast forward the track or to skip forward.
• To switch between Now playing and Music menu,
press .
R1136_en.book Page 21 Friday, March 2, 2007 9:42 AM
Media applications
22
Music menu
To select more music to play in Now playing when the
fold is open, select Options > Go to Music menu.
The music menu shows the music available in the device
and compatible memory card (if inserted). All songs lists
all music. To view sorted songs, select Albums, Artists,
Genres, or Composers. To view playlists, select Track lists.
To refresh the library after you have updated the song
selection in your device, select Options > Refresh Music
library.
To open the view that displays the currently playing song,
press and hold .
To switch between Now playing and Music menu when
the fold is closed, press . Use the quick cover and
volume keys to select more music to play. Select Options
to modify the basic play settings.
Playlists
To view and manage playlists, in the music menu, select
Track lists. The following playlists appear automatically:
Most played tracks, Recent tracks, and Recent
additions.
To view details of the playlist, select Options > Track list
details.
Create a playlist
1Select Options > Create playlist.
2Enter a name for the playlist, and select OK.
3Select artists to find the songs you want to include in
the playlist. Press to add items. To show the song
list under an artist title, press . To hide the song list,
press .
4When you have made your selections, select Done. If a
compatible memory card is inserted, the playlist is
saved to the memory card.
To add more songs later, when viewing the playlist, select
Options > Add songs.
To add songs, albums, artists, genres, and composers to a
playlist from the different views of the music menu, select
an item and Options > Add to track list > Saved track list
or New track list.
To remove a song from a playlist, select Options > Remove
from track list. This deletion does not delete the song
from the device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you want
to move, and select Options > Reorder list. To grab songs
and drop them to a new position, use the scroll key.
R1136_en.book Page 22 Friday, March 2, 2007 9:42 AM
Media applications
23
Music shop
In the music shop (network service) you can search,
browse, and purchase music for downloading to your
device. The variety, availability, and appearance of music
shop services may vary.
You must have music shop settings and valid internet
connections in order to use this service. For more details,
see ‘Music shop settings’, p. 23 and ‘Access points’, p.103.
Go to music shop
1In the Music menu, select Options > Go to Music
shop.
2Select from the displayed options to search, browse, or
select ringing tones.
Music shop settings
The availability and appearance of the music shop settings
may vary. The settings may also be predefined and not
editable.
If the settings are not predefined, you may be asked to
enter the following settings:
Address—You must define the web address of the music
shop service.
Default acc. pt.—Select the access point to use when
connecting to the music shop.
User name—Enter your user name for the music shop.
Password—Enter your password for the music shop.
If User name and Password fields are left empty, you may
have to enter them at login.
In the music shop, you may be able to edit the settings by
selecting Options > Settings.
Transfer music
You can transfer music from a compatible PC or other
compatible devices using a compatible USB cable or
Bluetooth connectivity. For details, see ‘Bluetooth
connectivity’, p. 59.
To refresh the library after you have updated the song
selection in your device, in the Music menu, select
Options > Refresh Music library
The requirements of the PC for music transfer:
• Microsoft Windows XP operating system (or later)
• A compatible version of Windows Media Player
application. You can get more detailed information
about Windows Media Player compatibility from the
Nokia N76 section of the Nokia website.
• Nokia Nseries PC Suite
Transfer music from PC
You can use three different methods to transfer music:
R1136_en.book Page 23 Friday, March 2, 2007 9:42 AM
Media applications
24
• To view your device on a compatible PC as an external
hard drive where you can transfer any data files, make
the connection with a compatible USB cable or
Bluetooth connectivity. If you are using the USB cable,
select Data transfer as the connection mode. A
compatible memory card needs to be inserted in the
device.
• To synchronize music with Windows Media Player,
connect the compatible USB cable and select Media
player as the connection mode. A compatible memory
card needs to be inserted in the device.
• To use Nokia Music Manager in Nokia Nseries PC Suite,
connect the compatible USB cable and select PC Suite
as the connection mode.
To change the default USB connection mode, press ,
select Tools > USB > USB mode.
Both Windows Media Player and Nokia Music Manager in
Nokia Nseries PC Suite have been optimized for
transferring music files. For information about
transferring music with Nokia Music Manager, see the
Nokia Nseries PC Suite user guide.
Music transfer with Windows Media Player
The functionality of the music synchronization may vary
between different versions of the Windows Media Player
application. For more information, see the corresponding
Windows Media Player guides and helps.
Manual synchronization
After connecting your device with a compatible PC,
Windows Media Player selects manual synchronization if
there is not enough free memory in your device. With
manual synchronization, you can select the songs and
playlists that you want to move, copy, or remove.
The first time you connect your device you must enter a
name that is used as the name of your device in Windows
Media Player.
To transfer manual selections:
1After your device is connected with Windows Media
Player, select your device in the navigation pane, if
more than one device is connected.
2Drag the songs or albums to the list pane for
synchronization. To remove songs or albums, select an
item in the list, and click Remove from list.
3Check that the list pane contains the files you want to
synchronize and that there is enough free memory on
the device. Click Start Sync. to start the
synchronization.
Automatic synchronization
To change the default file transfer option in Windows
Media Player, click the arrow under Sync, select your
device, and click Set up Sync. Clear or select the Sync this
device automatically check box.
R1136_en.book Page 24 Friday, March 2, 2007 9:42 AM
Media applications
25
If the Sync this device automatically check box is
selected and you connect your device, the music library in
your device is automatically updated based on playlists you
have selected in Windows Media Player.
If no playlists have been selected, the whole PC music
library is selected for synchronization. Note that your PC
library may contain more files that can fit to the device
memory and the compatible memory card of your device.
See the Windows Media Player help for more information.
The playlists on your device are not synchronized with the
Windows Media Player playlists.
Visual Radio
Press , and select Applications > Radio. You can use
the application as a traditional FM radio with automatic
tuning and saved stations, or with parallel visual
information related to the radio program on the display, if
you tune to stations that offer Visual Radio service. The
Visual Radio service uses packet data (network service).
You can listen to the FM radio while using other
applications.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
If you start music player when the radio is on, the radio is
muted. When music playback is paused or stopped, the
radio starts to play again.
When the fold is closed, use the quick cover keys and the
volume and mode keys to control the FM radio.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Press , and select Applications > Radio. To start a
station search, select or , or press and hold the
quick cover keys or . To change the frequency
manually, select Options > Manual tuning.
If you have previously saved radio stations, to go to the
next or previous saved station, select or , or press
the quick cover keys or .
To adjust the volume, press the volume keys.
R1136_en.book Page 25 Friday, March 2, 2007 9:42 AM
Media applications
26
To listen to the radio using the loudspeaker, select
Options > Activate loudspeaker.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of your
saved stations, select Options > Stations.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To check availability and costs, and to subscribe to the
service, contact your service provider.
To view available visual content for a tuned station, select
Options > Start visual service. If the visual service ID has
not been saved for the station, enter it, or select Retrieve
to search for it in the station directory (network service).
When the connection to the visual service is established,
the display shows the current visual content.
Saved stations
To open the list of your saved stations when the fold is
open, select Options > Stations.
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
To switch between the list of your saved stations and
listening to a saved station when the fold is closed, press
.
To change station details, select Options > Station > Edit.
Tip! You can add shortcuts to saved stations in the
multimedia menu. See ‘Multimedia key’, p. 14.
Settings
Select Options > Settings and from the following:
Start-up tone—Select whether a tone is played when the
application is started.
Auto-start service—Select Yes to have the Visual Radio
service start automatically when you select a saved station
that offers Visual Radio service.
Access point—Select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
R1136_en.book Page 26 Friday, March 2, 2007 9:42 AM
Media applications
27
Current region—Select the region you are currently
located in. This setting is displayed only if there was no
network coverage when the application was started.
RealPlayer
Press , and select Applications > RealPlayer. With
RealPlayer, you can play video clips, or stream media files
over the air without saving them to the device first.
RealPlayer supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
In landscape view, use the quick cover keys to control the
player.
Play video clips
1To play a saved media file, select Options > Open and
from the following:
Most recent clips—to play one of the last six files
played in RealPlayer
Saved clip—to play a file saved in Gallery.
2Scroll to a file, and press to play the file.
To adjust the volume, use the volume keys.
Stream content over the air
Many service providers require you to use an internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer recognizes an http link to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in your
device.
RealPlayer settings
You may receive RealPlayer settings in a special message
from the service provider. See ‘Data and settings’, p. 71.
For more information, contact your service provider.
Select Options > Settings and from the following:
Video—to have RealPlayer automatically repeat video
clips after they finish playing
Streaming—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
R1136_en.book Page 27 Friday, March 2, 2007 9:42 AM
Media applications
28
Adobe Flash Player
To view, play, and interact with compatible flash files
made for mobile devices, press , and select
Applications > Flash Player. Scroll to a flash file, and
press .
Nokia Lifeblog
To start Lifeblog on your device, press , and select
Lifeblog.
Nokia Lifeblog is a combination of software for mobile
phone and PC that keeps a multimedia diary of the items
that you collect with your device. Nokia Lifeblog
automatically keeps track of your multimedia items and
organizes your photos, videos, sounds, text messages,
multimedia messages, and weblog posts into a chronology
that you can browse, search, share, publish, and back up.
For more information on Nokia Lifeblog, see the guides for
your device at www.nokia.com/support or your local
Nokia website.
R1136_en.book Page 28 Friday, March 2, 2007 9:42 AM
Camera
29
Camera
Your device has two cameras, a high-resolution camera on
the back of the device (the main camera in landscape
mode) and a lower resolution camera on the upper right
corner of the main display (the secondary camera in
portrait mode). You can use both cameras to take still
pictures and record videos.
Your device supports an image capture resolution of
1600x1200 pixels using the main camera. The image
resolution in this guide may appear different.
The images and video clips are automatically saved in the
Images & video folder in Gallery. The cameras produce
.jpeg images. Video clips are recorded in the MPEG-4 file
format with the .mp4 file extension, or in the 3GPP file
format with the .3gp file extension (sharing quality). See
‘Video settings’, p. 37.
You can send images and video clips in a multimedia
message, as an e-mail attachment, or by using Bluetooth
connectivity. You can also upload them to your compatible
online album. See ‘Online sharing’, p. 42.
Take pictures
When taking a picture, note the following:
• Use both hands to keep the camera still.
• The quality of a digitally zoomed picture is lower than
that of a nonzoomed picture.
• The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
pictures, press .
Fold-closed mode
To take a picture using the cover display as the viewfinder,
do the following:
1To activate the main
camera, press and hold
. If the camera is in
Video mode, press .
2To take a picture, press
. Do not move the
device before the image is
saved.
Fold-open mode
To take a picture using the main display as the viewfinder,
do the following:
1Open the fold.
R1136_en.book Page 29 Friday, March 2, 2007 9:42 AM
Camera
30
2To activate the main camera, press . If the
camera is in Video mode, select Switch to Image
mode from the active toolbar.
3To take a picture, press . Do not move the
device before the image is saved.
To zoom in or out, use the volume keys in your device.
To make lighting and color adjustments before taking a
picture, in the main display, press or to scroll to
items on the active toolbar. In the cover display, press
to activate the toolbar, and volume keys to scroll to
items. See ‘Setup settings—color and lighting’, p. 33 and
‘Scenes’, p. 34.
To free memory before taking a picture, select Options >
Go to free memory in the main display (only available if
you have backed up images or video clips using Nokia
Nseries PC Suite). See ‘Free memory’, p. 40.
To activate the front camera, select Options > Use
secondary camera.
To leave the camera open in the background, and use
other applications, press . To return to the camera,
press the capture key.
Still image camera indicators
The still image camera viewfinder (main display) displays
the following:
1The current capture mode indicator.
2The active toolbar, which you can scroll through before
capturing the image to select different items and
settings (the active toolbar is not displayed during
image capture). See ‘Active toolbar’, p. 31.
3The image
resolution
indicator
indicates
whether the
quality of the
image is Print
2M - Large,
Print 1M -
Small, or MMS
0.3M - Small.
4The image counter displays the estimated number of
images you can capture using the current image quality
setting and memory in use (the counter is not displayed
during image capture).
5The device memory ( ) and memory card ( )
indicators show where images are saved.
R1136_en.book Page 30 Friday, March 2, 2007 9:42 AM
Camera
31
Active toolbar
Active toolbar provides you with shortcuts to different
items and settings before and after taking a picture or
recording a video.
If you are using the cover display as a viewfinder, press
to display the active toolbar. Use the volume keys to
scroll to the item you want. To select it, press .
If you are using the main display as a viewfinder, scroll to
the item you want. To select it, press .
The available options vary depending on the capture mode.
You can also define whether the active toolbar is always
visible on the display or activated by a key press.
If you want the active toolbar to be visible before and after
taking a picture or recording a video, select Options >
Show icons. To view the active toolbar only when you need
it, select Options > Hide icons. Only the capture mode
indicator is shown on the display. To activate the toolbar,
press . The toolbar is visible for 5 seconds.
Before taking a picture or recording a video, in the active
toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See ‘You in
the picture—self-timer’, p. 35.
to activate the sequence mode (images only). See
‘Take pictures in a sequence’, p. 34.
to select a color effect
to adjust white balance
to adjust the exposure compensation (images only)
to adjust light sensitivity (images only)
The icons change to reflect the current status of the
setting.
The available options vary depending on the capture mode
and view you are in.
See also active toolbar options in ‘After taking a picture’,
p. 31, ‘After recording a video’, p. 36, and ‘Active toolbar’,
p. 39 in Gallery.
After taking a picture
After you take a picture, there are several things you can
do with the image using the active toolbar in the main
display (available only if Show captured image is set to
On in the still image camera settings).
• If you do not want to keep the image, select Delete.
R1136_en.book Page 31 Friday, March 2, 2007 9:42 AM
Camera
32
• To send the image using multimedia, e-mail, Bluetooth
connectivity, or upload it to your online album, press
the call key, or select Send. For more information, see
‘Messaging’, p. 68, ‘Bluetooth connectivity’, p. 59, and
‘Online sharing’, p. 42. This option is not available
during an active call. You can also send the image to a
call recipient during an active call. Select Send to
caller (only available during an active call).
• To tag images to the Print basket for later printing,
select Add to Print Basket.
• To print the picture, select Print. See ‘Image print’,
p. 41.
• To return to the viewfinder to capture a new image,
press , or select Back.
To use the picture as wallpaper in the active standby,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select Set
as contact call image.
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup,
see ‘Setup settings—color and lighting’, p. 33. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality— Print 2M - Large (1600x1200
resolution), Print 1M - Small (1152x864 resolution) or
MMS 0.3M - Small (640x480 resolution) If you want to
print the image, select Print 2M - Large. If you want to
send it through e-mail, select Print 1M - Small. To send
the image through MMS, select MMS 0.3M - Small.
These resolutions are only available in the main camera. In
the secondary camera, the resolution is always MMS
0.3M - Small.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select On to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
R1136_en.book Page 32 Friday, March 2, 2007 9:42 AM
Camera
33
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Rotate image - Select whether you want the image to be
rotated the right way up when you open it in the gallery.
Restore camera settings—Select Yes to return the default
values to the camera settings.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available for the still image
camera: Automatic (), On (), R. eye redu. (), and
Off ().
To change the flash mode, in the active toolbar, select the
desired flash mode.
Setup settings—color and lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Exposure compensation (images only)—Adjust the
exposure time of the camera.
Flash—Select the desired flash mode. See ‘Flash’, p. 33.
Colour tone—Select a color effect from the list.
Light sensitivity (images only)—Select the light sensitivity
of the camera. The darker the environment, the higher the
light sensitivity should be.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however,
transfer between the image and video modes. The setup
settings return to the default settings when you close the
camera.
R1136_en.book Page 33 Friday, March 2, 2007 9:42 AM
Camera
34
If you select a new scene, the color and lighting settings
are replaced by the selected scene. See ‘Scenes’, p. 34. You
can change the setup settings after selecting a scene if
needed.
Scenes
A scene helps you to find the right color and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
environment.
Scenes are only available in the main camera.
In the active toolbar, select from the following options:
Video scenes
Automatic ( )(default) and Night ()
Image scenes
Auto () (default), User defined (), Portrait (),
Landscape (), Night (), and Night portrait ().
When you take pictures, the default scene is Auto.
To make your own scene suitable for a certain
environment, in the main display, scroll to User defined,
and select Options > Change. In the user defined scene
you can adjust different lighting and color settings. To
copy the settings of another scene, select Based on scene
mode and the desired scene. In the cover display, select
Settings > User scene > Change. To copy the settings of
another scene, select Based on scene.
Take pictures in a sequence
The sequence mode is available only in the main camera.
To set the camera to take six pictures or more in a
sequence (if enough memory available), in the active
toolbar, select Switch to sequence mode to take six
pictures in quick succession. The number of pictures taken
depends on the available memory.
To take six pictures, press the capture key. To stop taking
pictures, press Cancel. To take more than six pictures, press
and hold the capture key. To stop taking pictures, release
the capture key. You can capture up to 100 images,
depending on the available memory.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it. If you used
a time period for taking pictures, the last taken picture is
shown on the display. To view other pictures, press .
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum number of
pictures is six.
To return to the sequence mode viewfinder, press the
capture key.
R1136_en.book Page 34 Friday, March 2, 2007 9:42 AM
Camera
35
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select Self timer > 2 seconds, 10
seconds, or 20 seconds. To activate the self-timer, select
Activate. The self-timer indicator ( ) blinks and the
device beeps when the timer is running. The camera takes
the picture after the selected delay elapses.
To switch off Self timer, in the active toolbar, select Self
timer > Off.
Tip! In the active toolbar, select Self timer > 2
seconds to keep your hand steady when taking a
picture.
Record videos
To record videos using the cover display as the viewfinder
(fold closed), do the following:
1If the camera is in the Image mode, press to
switch to Video mode.
2Press to start recording. The red record icon
is shown and a tone sounds, indicating that
recording has started.
3To stop recording, press or select Stop. The
video clip is automatically saved to the Images &
video folder in Gallery.See ‘Gallery’, p. 38. The
maximum length of the video is 60 minutes (if enough
memory available).
To record videos using the main display as the viewfinder
(fold open), do the following:
1If the camera is in the Image mode, select Switch to
video mode from the active toolbar.
2To start recording, press . The red record icon
is shown and a tone sounds, indicating that
recording has started.
3To stop recording, press or select Stop. The
video clip is automatically saved to Images & video in
Gallery. See ‘Images and video clips’ p. 38. The
maximum length of the video is 60 minutes (if enough
memory available).
To pause recording at any time, select Pause. The pause
icon ( ) blinks on the display. Video recording
automatically stops if recording is set to pause and there
are no keypresses within a minute. Select Continue to
resume recording.
To zoom in or out of the subject, press the volume keys on
the side of the device.
To make lighting and color adjustments before recording
a video, use the scroll key to scroll through the active
R1136_en.book Page 35 Friday, March 2, 2007 9:42 AM
Camera
36
toolbar. See ‘Setup settings—color and lighting’, p. 33 and
‘Scenes’, p. 34.
To free memory before recording a video, select Options >
Go to free memory (only available if you have backed up
images or video clips). See ‘Free memory’, p. 40.
To activate the front camera, select Options > Use
secondary camera.
Video capture indicators
The video viewfinder displays the following:
1The current
capture mode
indicator.
2The audio mute
on indicator.
3The active
toolbar, which
you can scroll
through before
recording to
select different items and settings (the toolbar is not
displayed during recording). See ‘Active toolbar’, p. 31.
4The total available video recording time. When you are
recording, the current video length indicator also
shows the elapsed time and time remaining.
5The device memory ( ) and memory card ( )
indicators show where videos are saved.
6The video quality indicator indicates whether the
quality of the video is High, Normal, or Sharing.
7The video clip file type.
To display all viewfinder indicators, select Options > Show
icons. Select Hide icons to display only the video status
indicators, and during the recording, the available record
time, zoom bar when zooming, and the selection keys.
After recording a video
After you record a video clip, select the following from the
active toolbar in the main display (available only if Show
captured video is set to On in video settings):
• To immediately play the video clip you just recorded,
select Play.
• If you do not want to keep the video, select Delete.
• To send the video clip using multimedia, e-mail,
Bluetooth connectivity, or upload it to your online
album, press the call key, or select Send. For more
information, see ‘Messaging’, p. 68, ‘Bluetooth
connectivity’, p. 59, and ‘Online sharing’, p. 42. This
option is not available during an active call. You may
not be able to send video clips saved in the .mp4 file
format in a multimedia message. You can also send the
video clip to a call recipient during an active call. Select
Send to caller.
R1136_en.book Page 36 Friday, March 2, 2007 9:42 AM
Camera
37
• To record a new video clip, select New video.
Video settings
There are two kinds of settings for the video recorder:
Video setup and main settings. To adjust Video setup
settings, see ‘Setup settings—color and lighting’, p. 33. The
setup settings return to the default settings after you close
the camera, but the main settings remain the same until
you change them again. To change the main settings,
select Options > Settings and from the following:
Video quality—Set the quality of the video clip to High
(best quality for long term usage and playback on a
compatible TV or PC and handset), Normal (standard
quality for playback through your handset), or Sharing
(limited video clip size to send using multimedia message).
If you want to view the video on a compatible TV or PC,
select High, which has QVGA resolution (320x240) and the
.mp4 file format. To send the video clip through MMS,
select Sharing (QCIF resolution, .3gp file format). The size
of the video clip recorded with Sharing is limited to 300
KB (about 20 seconds in duration) so that it can be
conveniently sent as a multimedia message to a
compatible device.
Audio recording—Select Off if you do not want to record
sound.
Add to album—Select whether you want to add the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the
display after the recording stops. Select Play from the
active toolbar (main camera) or Options > Play (secondary
camera) to view the video clip.
Default video name—Define the default name for the
captured video clips.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Restore camera settings—Select Yes to return the default
values to the camera settings.
R1136_en.book Page 37 Friday, March 2, 2007 9:42 AM
Gallery
38
Gallery
To store and organize your images, video clips, sound clips,
and streaming links, press , and select Gallery.
Tip! If you are in another application, to view the last
saved picture in Gallery, press . To enter the
Images & video folder main view, press again.
View and browse files
Select Images & video ,
Tracks , Sound clips ,
Streaming links ,
Presentations , or All
files , and press to
open it.
You can browse and open
folders; and mark, copy, and
move items to folders. You
can also create albums; and
mark, copy, and add items to
albums. See ‘Albums’, p. 40.
Files stored on your compatible memory card (if inserted)
are indicated with .
To open a file, press . Video clips, .ram files, and
streaming links are opened and played in RealPlayer, and
music and sound clips in Music player. See ‘RealPlayer’, p.
27, and ‘Music player’, p. 21.
To copy or move files to the memory card (if inserted) or to
device memory, select a file and Options > Move and
copy > Copy to memory card or Move to memory card,
or Copy to phone mem. or Move to phone mem..
To download sound clips into Gallery using the browser, in
the Sound clips folders, select Downld. sounds.
Images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images & video folder in Gallery. Images
and video clips can also be sent to you in a multimedia
message, as an e-mail attachment, or through Bluetooth
connectivity. To be able to view a received image or video
clip in Gallery or in a media player, you must save it in the
device memory or on a compatible memory card (if
inserted).
Select Gallery > Images & video. The images and video
clip files are in a loop, and ordered by date and time. The
number of files is displayed. To browse the files one by one,
R1136_en.book Page 38 Friday, March 2, 2007 9:42 AM
Gallery
39
press or . To browse files in groups, press or
. To switch between landscape and portrait modes,
select Options > Rotate display. The content in the
Images & video folder is shown in the selected mode.
When the image is opened, to zoom in an image, press the
zoom keys on the side of your device. The zooming ratio is
not stored permanently.
To rotate the selected image left or right, select Options >
Rotate > Left or Right.
To print your images on a compatible printer or to store
them on a compatible memory card (if inserted) for
printing, select Options > Print. See ‘Image print’, p. 41.
You can also tag images for later printing to the Print
Basket in Gallery. See ‘Print Basket’, p. 40.
To edit a video clip or a photo, select Options > Edit. An
image editor or a video editor opens. See ‘Edit video clips’,
p. 43. See ‘Edit images’, p. 42.
To create custom video clips, select a video clip or several
clips in the gallery, and select Options > Edit. See ‘Edit
video clips’, p. 43.
To add an image or a video clip to an album in the gallery,
select Options > Albums > Add to album. See ‘Albums’,
p. 40.
To use the picture as a background image, select the
picture and Options >Use image > Set as wallpaper.
To delete an image or video clip, from the active toolbar,
select Delete. See ‘Active toolbar’, p. 39.
To switch from Gallery to the camera, press .
Active toolbar
In the Images & video folder, you can use active toolbar
as a shortcut to select different tasks. The active toolbar is
available only when you have selected an image or a video
clip.
In the active toolbar, scroll up or down to different items,
and select them by pressing . The available options
vary depending on the view you are in and whether you
have selected an image or a video clip. You can also define
whether the active toolbar is always visible on the display
or activated by a keypress.
If you want the active toolbar to be visible on the display,
select Options > Show icons.
If you want the active toolbar to be visible only when you
need it, select Options > Hide icons. To activate the active
toolbar, press .
Select from the following:
to play the selected video clip
to send the selected image or video clip
R1136_en.book Page 39 Friday, March 2, 2007 9:42 AM
Gallery
40
/ to add or remove an image from the Print Basket.
See ‘Print Basket’, p. 40.
to view the images in the Print Basket
to start a slide show of your images
to delete the selected image or video clip
to print the viewed image
to reduce the resolution of the selected image to free
memory for new images. See ‘Free memory’, p. 40.
The available options may vary depending on the view you
are in.
Print Basket
You can tag images to the Print Basket, and print them
later with a compatible printer or in a compatible printing
kiosk, if available. See ‘Image print’, p. 41. The tagged
images are indicated with in the Images & video
folder and albums.
To tag an image for later printing, select an image, and
Add to Print Basket from the active toolbar.
To view the images in the Print Basket, select View Print
Basket from the active toolbar, or select from the
Images & video folder (available only when you have
added pictures to the Print Basket).
To remove an image from the Print Basket, select an image
in the Images & video folder or in an album, and Remove
from print from the active toolbar.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, select Images &
video > Options > Albums > View albums.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens. Select the
album to which you want to add the picture or video clip.
The added pictures and video clips are not deleted from the
Images & video folder.
To remove a file from an album, press . The file is not
deleted from the Images & video folder in Gallery.
To create a new album, in the albums list view, select
Options > New album.
Free memory
To reduce the resolution and file size of images saved in
Gallery and free memory for new pictures, select
Options > Shrink. To back up the images first, copy them
R1136_en.book Page 40 Friday, March 2, 2007 9:42 AM
Gallery
41
to a compatible PC or other location. Selecting Shrink
reduces the resolution of an image to 640x480.
To increase free memory space after you have copied items
to other locations or devices, select Options > Free
memory. You can browse a list of files you have copied. To
remove a copied file from Gallery, select Options > Delete.
Image print
To print images with Image print, select the image you
want to print, and the print option in the gallery, camera,
image editor, or image viewer.
Use Image print to print your images using a compatible
USB data cable, Bluetooth connectivity, or a compatible
memory card (if available).
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpeg format.
To print to a printer compatible with PictBridge, connect
the data cable before you select the print option, and
check that the data cable mode is set to Image print or
Ask on connection. See ‘USB’, p. 62.
Printer selection
When you use Image print for the first time, a list of
available compatible printers is displayed after you select
the image. Select a printer. The printer is set as the default
printer.
If you have connected a printer compatible with
PictBridge using a compatible USB data cable, the printer
is automatically displayed.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
Print preview
After you select the printer, the selected images are
displayed using predefined layouts. To change the layout,
press or to browse through the available layouts
for the selected printer. If the images do not fit on a single
page, press or to display the additional pages.
Print settings
The available options vary depending on the capabilities of
the printing device you selected.
To set a default printer, select Options > Default printer.
R1136_en.book Page 41 Friday, March 2, 2007 9:42 AM
Gallery
42
To select the paper size, select Paper size, the size of
paper from the list, and OK. Select Cancel to return to the
previous view.
Print online
With Print online, you can order prints of images online
directly to your home, or to a store where you can pick
them up. The available products depend on the service
provider.
To use Print online, you must have at least one printing
service configuration file installed. The files can be
obtained from printing service providers that support
Print online.
For more information on the application, see the guides
for your device at www.nokia.com/support or your local
Nokia website.
Online sharing
With Online share, you can share images and video clips
in compatible online albums, weblogs, or in other online
sharing services on the web. You can upload content, save
unfinished posts as drafts and continue later, and view the
content of the albums. The supported content types may
vary depending on the service provider.
To use Online share, you must subscribe to the service
with an online image sharing service provider, and create
a new account. You can usually subscribe to the service on
the web page of the service provider. Contact your service
provider for details on subscribing to the service. For more
information on compatible service providers, see the
product support pages at www.nokia.com/support or your
local Nokia website.
For more information on the application, see the guides for
your device at www.nokia.com/support or your local Nokia
website.
Edit images
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit.
Select Options > Apply effect to open a grid where you
can select different edit options indicated by small icons.
You can crop and rotate the image; adjust the brightness,
color, contrast, and resolution; and add effects, text, clip
art, or a frame to the picture.
Crop image
To crop an image, select Options > Apply effect > Crop.
To crop the image size manually, select Manual or a
predefined aspect ratio from the list. If you select Manual,
R1136_en.book Page 42 Friday, March 2, 2007 9:42 AM
Gallery
43
a cross appears in the upper left corner of the image. Use
the scroll key to select the area to crop, and select Set.
Another cross appears in the lower right corner. Again
select the area to be cropped. To adjust the first selected
area, select Back. The selected areas form a rectangle that
forms the cropped image.
If you selected a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the selected
area, press . To move the area within the picture, use
the scroll key. To select the area to be cropped, press .
Reduce redness
To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto
the eye, and press . A loop appears on the display. To
resize the loop to fit the size of the eye, use the scroll key.
To reduce the redness, press .
Useful shortcuts
Shortcuts in the image editor:
• To view an image in the full screen, press . To return
to the normal view, press again.
• To rotate an image clockwise or counterclockwise,
press or .
• To zoom in or out, press or .
• To move on a zoomed image, press , , , or
.
Edit video clips
To edit video clips in Gallery and create custom video
clips, scroll to a video clip, and select Options >Edit >
Video Editor. To create custom video clips, combine and
trim video clips, and add images, sound clips, transitions,
and effects. Transitions are visual effects that you can add
in the beginning and end of the video or between the
video clips.
The video editor supports .3gp and .mp4 video file formats,
and .aac, .amr, .mp3, and .wav audio file formats.
You can use Movie director to create custom video clips.
Select the video clips and images you want to create a
muvee with and select Options > Edit > Create muvee.
See ‘Movie director’, p. 45.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. The images, text, and
transitions added to a video clip are shown on the video
clip timeline. To switch between the timelines, scroll up or
down.
R1136_en.book Page 43 Friday, March 2, 2007 9:42 AM
Gallery
44
Edit video, sound, image, text, and
transitions
To create custom video clips, mark and select one or more
video clips, and select Options > Edit > Video Editor.
To modify the video, select from the following options:
Edit video clip:
Cut—trims the video clip in the cut video clip view
Add colour effect—inserts a color effect on the video clip
Use slow motion—slows the speed of the video clip
Mute sound or Unmute sound—mutes or unmutes the
original video clip sound
Move—moves the video clip to the selected location
Remove—removes the video clip from the video
Duplicate—makes a copy of the selected video clip
Edit text (shown only if you added text)—to move,
remove, or duplicate text; change the color and style of
the text; define how long it stays on the screen; and add
effects to the text
Edit image (shown only if you added an image)—to move,
remove, or duplicate an image; define how long it stays on
the screen; and set a background or a color effect to the
image
Edit sound clip (shown only if you have added a sound
clip)—to cut or move the sound clip, to adjust its length, or
to remove or duplicate the clip
Edit transition—There are three types of transitions: at the
start of a video, at the end of a video, and transitions
between video clips. You can select start transition when
the first transition of the video is active.
Insert—Select Video clip, Image, Text, Sound clip, or New
sound clip.
Movie—Preview the movie in the full screen or as a
thumbnail, save the movie, or cut the movie to a proper
size for sending it in a multimedia message.
To take a snapshot of a video clip, in the cut video view,
select Options > Take snapshot. In the thumbnail preview
view, press , and select Take snapshot.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
In the Settings view, you can also define Default video
name, Default snapshot name, Resolution, and Memory
in use.
To send a video clip, select Options > Send > Via
multimedia, Via e-mail, or Via Bluetooth. Contact your
wireless service provider for details of the maximum
multimedia message size that you can send.
R1136_en.book Page 44 Friday, March 2, 2007 9:42 AM
Gallery
45
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, send the clip using Bluetooth wireless
technology. See ‘Send data using Bluetooth
connectivity’, p. 60. You can also transfer your videos to
a compatible PC using Bluetooth connectivity, a
compatible USB cable, or by using a compatible
memory card reader enhancement.
Slide show
In the active toolbar, select Slide show ( ) to view a
slide show of images in full screen. The slide show starts
from the selected file. Select from the following:
Pause—to pause the slide show
Continue—to resume the slide show, if paused
End—to close the slide show
To browse the images, press (previous) or (next)
(available only when Zoom and pan is off).
To adjust the tempo of the slide show, before starting the
slide show, select Options > Slide show > Settings >
Delay between slides.
To make the slide show move smoothly from one slide to
another, and let the gallery randomly zoom in and out in
the images, select Zoom and pan.
To add sound to the slide show, select Options > Slide
show > Settings > Music or Track.
To decrease or increase the volume, use the volume keys
in your device.
Presentations
With presentations, you can view SVG (scalable vector
graphics) files, such as cartoons and maps. SVG images
maintain their appearance when printed or viewed with
different screen sizes and resolutions. To view SVG files,
select Presentations, scroll to an image, and select
Options > Play. To pause playing, select Options > Pause.
To zoom in, press . To zoom out, press .
To rotate the image 90 degrees clockwise or
counter-clockwise, press or . To rotate the image
45 degrees, press or .
To switch between full screen and normal screen,
press .
Movie director
To create muvees, press , and select Gallery, images
and videos, and Options > Edit > Create muvee.
A muvee is a short, edited video clip that can contain
video, images, music, and text. Quick muvee is created
R1136_en.book Page 45 Friday, March 2, 2007 9:42 AM
Gallery
46
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. In a custom muvee
you can select your own video and music clips, images and
style, and add an opening and closing message. You can
send muvees in a multimedia message.
A muvee can be saved in Gallery in .3gp file format.
Create a quick muvee
1In Gallery, select images and videos for the muvee,
and Options > Edit > Create muvee. The style
selection view opens.
2Select a style for the muvee from the style list.
3Select Options > Create muvee.
Create a custom muvee
1In Gallery, select images and videos for the muvee,
and Options > Edit > Create muvee. The style
selection view opens.
2Scroll to the desired style, and select Options >
Customise.
3Reorder and edit the selected items, or add or remove
items from your muvee in Videos & images or Music.
In Videos & images, you can define the order in which
the files are played in the muvee. To select the file you
want to move, press . Then scroll to the file below
which you want to place the marked file, and press .
To add or remove images and videos from the muvee,
select Options > Add/Remove.
To add albums and their content to the muvee, in the
image or video clip list view, select Options > Albums.
To cut the video clips, In Videos & images, select
Options > Select contents. See ‘Select content’, p. 47.
In Message you can add an opening and closing text to
a muvee.
In Length, you can define the length of the muvee.
Select from the following:
Multimedia message—to optimize the length of the
muvee for sending in a multimedia message
Auto-select—to include all the selected images and
video clips in the muvee
Same as music—to set the muvee duration to be the
same as the chosen music clip
User defined—to define the length of the muvee
4Select Options > Create muvee. The preview view
opens.
5To preview the custom muvee before saving it, select
Options > Play.
6To save the muvee, select Options > Save.
To create a new custom muvee by using the same style
settings, select Options > Recreate.
R1136_en.book Page 46 Friday, March 2, 2007 9:42 AM
Gallery
47
Select content
To edit the selected video clips, in the Videos & images
folder, select Options > Select contents. You can select
which parts of the video clip you want to include or
exclude in the muvee. In the slide, green indicates
included, red indicates excluded, and grey indicates
neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Include. To exclude a part,
select Options > Exclude. To exclude a shot, select
Options > Exclude shot.
To let Movie director randomly include or exclude a
certain part of the video clip, scroll to the part, and select
Options > Mark as neutral. To randomly include or
exclude parts of the clip, select Options > Mark all as
neutral.
Settings
In the style selection view, select Options > Customise >
Settings to edit the following options:
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees. Select
Automatic to use the optimal resolution based on the
number and length of the video clips you have selected.
Default muvee name—Set a default name for the muvees.
R1136_en.book Page 47 Friday, March 2, 2007 9:42 AM
Personalize your device
48
Personalize your device
To personalize your device, select from the following:
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 50.
• To change the standby mode background image or
what is shown in the screen saver, see ‘Change the
look of your device’, p. 49.
• To change the look of the cover display, see ‘Cover
display’, p. 50.
• To customize the ringing tones, see ‘Profiles—set
tones’, p. 48 and ‘Add ringing tones for contacts’, p. 87.
• To change the shortcuts assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 96.
• To change the clock shown in the standby mode, press
, and select Applications > Clock > Options >
Settings > Clock type > Analogue or Digital.
• To change the welcome note to an image or
animation, press , and select Tools > Settings >
General > Personalisation > Display > Welcome
note / logo.
• To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or List.
• To use animated icons in your device, in the main
menu, select Options > Icon animation > On.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
To change the profile, select Tools > Profiles, a profile, and
Options > Activate. You can also change the profile by
pressing in the standby mode. Scroll to the profile you
want to activate, and select OK.
Tip! To switch between the general and silent profiles,
press and hold .
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on a compatible memory
card (if inserted) are indicated with .
R1136_en.book Page 48 Friday, March 2, 2007 9:42 AM
Personalize your device
49
In the tones list, the Download sounds link (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a web page to download
more tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Personalise, and set Say
caller's name to On. The caller’s name must be saved in
Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a SIM card.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the
lock code.
You can also use Bluetooth connectivity while in the
Offline profile. See ‘Bluetooth connectivity’, p. 59.
To leave the Offline profile, press the power key, and
select another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes.
To change the theme that is used for all the applications
in your device, select Themes > General. To change the
theme of a certain application, in the main view, select an
application.
To preview a theme before activating it, select Options >
Preview. To activate the theme, select Options > Set. The
active theme is indicated by .
The themes on a compatible memory card (if inserted) are
indicated by . The themes on the memory card are not
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
R1136_en.book Page 49 Friday, March 2, 2007 9:42 AM
Personalize your device
50
without the memory card, save the themes in the device
memory first.
To change the layout of the main menu, select Themes >
Menu view.
To open a browser connection and download more
themes, in General or Menu view, select Download
themes (network service).
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To edit the wallpaper and power saver of the current
theme, select Themes > Wallpaper to change the
background image on the display for the active standby
mode. See also ‘Display’, p. 95 for power saver time-out
setting.
Cover display
To change the look of the cover display, press and
select Tools > Themes > Cover personalis., and from the
following:
Wallpaper—Select the background image displayed on
the cover display in the standby mode.
Screen saver—Select an image or animation to use as a
screen saver on the cover display and how long it is
displayed.
When you select an image to use as wallpaper or a screen
saver, a cropping frame the size of the cover display is
shown on top of the image. You can zoom and rotate the
area of the image. Scroll to move the frame around the
display. To use the area inside the frame, select Options >
Set as wallpaper or Set as screen saver. You cannot use
a copyright-protected image as wallpaper or screen saver.
Closing animation—Select a short animation to play when
you close the cover.
Closing tone—Select a short tune to play when you close
the cover.
Opening tone—Select a short tune to play when you open
the cover and the device is in the standby mode.
Active standby mode
The active standby display shows application shortcuts,
and events from applications such as calendar and player.
To switch the active standby on or off, press , and
select Tools > Settings > General > Personalisation >
Standby mode > Active standby.
R1136_en.book Page 50 Friday, March 2, 2007 9:42 AM
Personalize your device
51
Scroll to an application or
event, and press .
The standard scroll key
shortcuts available in the
standby mode cannot be used
when the active standby
mode is on.
To change the default
applications’ shortcuts, press
, and select Tools >
Settings > General >
Personalisation > Standby
mode > Active standby apps..
Some shortcuts may be fixed, and you cannot change
them.
R1136_en.book Page 51 Friday, March 2, 2007 9:42 AM
Web browser
52
Web browser
Press , and select Web (network service).
Shortcut: To start the web browser, press and hold
in the standby mode.
With the web browser, you can view hypertext markup
language (HTML) web pages on the internet as originally
designed. You can also browse web pages that are
designed specifically for mobile devices, and use
extensible hypertext markup language (XHTML), or the
wireless markup language (WML).
With Web, you can zoom in and out on a page, use Mini
Map and page overview to navigate on pages, read web
feeds and blogs, bookmark web pages, and download
content.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
To use the web browser, you need an access point to
connect to internet. See ‘Access points’, p. 103.
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Security certificates may be required for some services,
such as banking services. You are notified if the identity of
the server is not authentic or if you do not have the correct
security certificate in your device. For more information,
contact your service provider. See also ‘Certificate
management’, p. 98 for more information on the
certificates and certificate details.
Bookmarks view
The bookmarks view allows you to select web addresses
from a list or from a collection of bookmarks in the Auto.
Bookmarks folder. You can also enter the URL address of
the web page you want to visit directly into the field ( ).
R1136_en.book Page 52 Friday, March 2, 2007 9:42 AM
Web browser
53
indicates the starting page defined for the default
access point.
You can save URL addresses as bookmarks while browsing
on the internet. You can also save addresses received in
messages to your bookmarks and send saved bookmarks.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other third-
party sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
To open the bookmarks view while browsing, press , or
select Options > Bookmarks.
To edit the details of a bookmark, such as the title, select
Options > Bookmark manager > Edit.
In the bookmarks view, you can also enter other browser
folders. The web browser allows you to save web pages
during browsing. In the Saved pages folder, you can view
the content of the pages you have saved offline.
The web browser also keeps track of the web pages you
visit during browsing. In the Auto. Bookmarks folder, you
can view the list of visited web pages.
In Web Feeds, you can view saved links to web feeds and
blogs to which you have subscribed. Web feeds are
commonly found on major news organization web pages,
personal weblogs, online communities that offer latest
headlines, and article summaries. Web feeds use RSS and
ATOM technologies.
Browse the web
Important:Use only services that you trust and that
offer adequate security and protection against harmful
software.
With Web, you can view web pages as they are originally
designed. To browse a web page, in the bookmarks view,
select a bookmark, or enter the address in the field ( ).
Then press .
Some web pages may contain material, such as graphics
and sounds, that requires a large amount of memory to
view. If your device runs out of memory while loading such
a page, the graphics on the page are not shown. To browse
web pages without graphics to save memory, select
Options > Settings > Page > Load images and sounds >
No.
Tip! To return to the standby mode with the browser
open in the background, press twice or . To
return to the browser, press and hold , and select
the browser from the list.
R1136_en.book Page 53 Friday, March 2, 2007 9:42 AM
Web browser
54
To open links and make selections, press . To open a
link in a new window, select Options > Window > Link in
new window.
To enter a new web page address you want to visit, select
Options > Go to web address.
Tip! To visit a web page saved as bookmark in the
bookmarks view, while browsing, press and select
a bookmark.
To retrieve the latest content of the page from the server,
select Options > Navigation options > Reload.
To save the web address of the current page as bookmark,
select Options > Save as bookmark.
To use Visual history to view snapshots of the pages you
have visited during the current browsing session, select
Back (available if History list is set on in the browser
settings) or Options > Navigation options > History. To
go to a previously visited page, select the page.
To save a page while browsing, select Options > Tools >
Save page. You can save pages to the device memory or
compatible memory card (if inserted), and browse them
when offline. You can also group the pages into folders.
To access the pages later, in the bookmarks view, select
Saved pages.
To open a sublist of commands or actions for the currently
open page, select Options > Service options (if supported
by the web page).
To allow or prevent the automatic opening of multiple
windows, select Options > Window > Block pop-ups or
Allow pop-ups.
Shortcuts while browsing
• Press to open your bookmarks.
• Press to search for keywords in the current page.
• Press to return to the previous page.
• Press to list all open windows.
• Press to close the current window if two or more
windows are open.
• Press to show the page overview of the current
page. Press again to zoom in and view the desired
section of the page.
• Press to enter a new web address.
• Press to go to the start page.
• Press or to zoom the page in or out.
To switch between portrait and landscape views, select
Options > Rotate screen.
Text Search
To search for keywords within the current web page, select
Options > Find > Text, and enter a keyword. To go to the
R1136_en.book Page 54 Friday, March 2, 2007 9:42 AM
Web browser
55
previous match, press . To go to the next match, press
.
Tip! To search for keywords within the page, press
.
Browser toolbar
With the toolbar, you can select most frequently used
features in the browser. To open the toolbar, press on
an empty spot on a web page. To move within the toolbar,
press or , To select a feature, press .
In the toolbar, select from the following:
Frequently used links to view a list of the web addresses
you visit frequently.
Page overview to view the overview of the current web
page.
Find to search for keywords within the current page.
Reload to refresh the page.
Subscribe(if available) to view a list of available web feeds
on the current web page, and subscribe to a web feed.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free of charge, or you can purchase them.
Downloaded items are handled by the respective
applications in your device, for example, a downloaded
photo or an .mp3 file can be saved in Gallery.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
1To download the item, select the link.
2Select the appropriate option to purchase the item (for
example, “Buy”).
3Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
When you start a download, a list of ongoing and
completed downloads from the current browsing session
is displayed. To also view the list, select Options >
Downloads. In the list, scroll to an item, and select
Options to cancel ongoing downloads, or open, save, or
delete completed downloads.
Mini Map
Mini Map helps you to navigate on web pages that
contain large amount of information. When Mini Map is
set on in the browser settings and you scroll through a
large web page, Mini Map opens and shows an overview
of the web page you browse. To scroll in Mini Map, press
R1136_en.book Page 55 Friday, March 2, 2007 9:42 AM
Web browser
56
, , , or . When you find the desired location,
stop scrolling, and Mini Map disappears and leaves you at
the selected location.
To set Mini Map on, select Options > Settings >
General> Mini Map > On.
Page overview
When you are browsing a web page that contains a large
amount of information, you can use page overview to
view what kind of information the page contains.
To show the page overview of the current page, press .
To find the desired spot on the page, press , , ,
or . Press again to zoom in and view the desired
section of the page.
Web feeds and blogs
Web feeds are xml files on web pages that are widely used
by the weblog community and news organizations to
share the latest entry headlines or full text, for example,
recent news in the form of news feeds. Blogs or weblogs
are web diaries. Most of the web feeds use RSS and ATOM
technologies. It is common to find web feeds on web, blog,
and wiki pages.
The web browser automatically detects if a web page
contains web feeds. To subscribe to a web feed, select
Options > Subscribe, or click on the link. To view the web
feeds to which you have subscribed, in the bookmarks
view, select Web feeds.
To update a web feed, select it, and Options > Refresh.
To define how the web feeds are updated, select Options >
Settings > Web feeds. See ‘Settings’, p. 57.
End connection
To end the connection and view the browser page offline,
select Options > Tools > Disconnect; or to end the
connection and close the browser, select Options > Exit.
Pressing does not end the connection but takes the
browser to the background.
To delete the information the network server collects
about your visits to various web pages, select Options >
Clear privacy data > Delete cookies.
To clear the data you entered for different forms on the
web pages you visited, select Options > Clear privacy
data > Form password data.
To clear the information stored about the pages you have
visited during the current browsing session, select
Options > Clear privacy data > History.
R1136_en.book Page 56 Friday, March 2, 2007 9:42 AM
Web browser
57
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Clear privacy data > Clear cache.
Settings
Select Options > Settings and from the following:
General settings
Access point—Change the default access point. See
‘Connection’, p. 102. Some or all access points may be
preset for your device by your service provider; you may
not be able to change, create, edit, or remove them.
Homepage—Define the home page.
Mini Map—Set Mini Map on or off. See ‘Mini Map’, p. 55.
History list—While browsing, to use the selection key Back
to see a list of the pages you have visited during the
current browsing session, set History list on.
Security warnings—Hide or show security notifications.
Java/ECMA script—Enable or disable the use of scripts.
Page settings
Load images and sounds—Select whether you want to
load images and other objects while browsing. If you
select No, to load images or objects later during browsing,
select Options > Tools > Load images.
Screen size—Select between Full screen and the normal
view with the Options list.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language for the current page.
Font size—Define the font size that is used for web pages.
Block pop-ups—Allow or block automatic opening of
different pop-ups while browsing.
Automatic reload—If you want the web pages to be
refreshed automatically while browsing, select On.
Privacy settings
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue saving the addresses of
the visited web pages into the Auto. Bookmarks folder,
but hide the folder from the bookmarks view, select Hide
folder.
R1136_en.book Page 57 Friday, March 2, 2007 9:42 AM
Web browser
58
Form data saving—If you do not want the data you enter
to different forms on a web page to be saved and used
next time the page is entered, select Off.
Cookies—Enable or disable the receiving and sending of
cookies.
Serial no. sending—To send the serial number of your
device as your user identification when requested by web
services, select On (if available).
Web feeds settings
Automatic updates—Define whether you want the web
feeds to be updated automatically or not, and how often
you want to update them. Setting the application to
retrieve web feeds automatically may involve the
transmission of large amounts of data through your
service provider's network. Contact your service provider
for information about data transmission charges.
Acc. point for auto-update (only available when
Automatic updates is on)—Select the desired access
point for updating.
R1136_en.book Page 58 Friday, March 2, 2007 9:42 AM
Connections
59
Connections
Connection manager
Data connections
Press , and select Tools > Conn. mgr. > Active data
connections. In the active connections view, you can see
the open data connections: data calls ( ), and packet
data connections ( ).
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To close
all open connections, select Options > Disconnect all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Bluetooth connectivity
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
connectivity to send images, video clips, music and sound
clips, and notes; connect wirelessly to your compatible PC
(for example, to transfer files); connect to a compatible
printer to print images with Image print. See ‘Image
print’, p. 41.
Since devices with Bluetooth wireless technology
communicate using radio waves, your device and the
other device do not need to be in direct line-of-sight. The
two devices only need to be within 10 meters (33 feet) of
each other, but the connection may be subject to
interference from obstructions such as walls or from other
electronic devices.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Basic Imaging Profile,
SIM Access Profile, Dial-up Networking Profile, File
Transfer Profile, Generic Access Profile, Generic Audio
Visual Distribution Profile, Generic Object Exchange
Profile, Hands-Free Profile, Headset Profile, Human
Interface Device Profile, Object Push Profile, Service
Discovery Application Profile, Serial Port Profile, and
Synchronization Profile. To ensure interoperability
between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model. Check
with the manufacturers of other devices to determine
their compatibility with this device.
R1136_en.book Page 59 Friday, March 2, 2007 9:42 AM
Connections
60
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Phone and SIM card’, p. 97 for more
information on locking the device.
Settings
Press , and select Tools > Bluetooth. When you open
the application for the first time, you are asked to define
a name for your device.
Select from the following:
Bluetooth—To connect wirelessly to another compatible
device, first set Bluetooth connectivity On, then establish
a connection. To switch off Bluetooth connectivity, select
Off.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth wireless technology,
select Shown to all. To set a time after which the visibility
is set from shown to hidden, select Define period. To hide
your device from other devices, select Hidden.
My phone's name—Edit the name shown to other devices
using Bluetooth wireless technology.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On. For more
information, see ‘Remote SIM mode’, p. 62.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden. In this
way, you can better control who can find your device with
Bluetooth wireless technology, and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
For Bluetooth connectivity indicators, see ‘Essential
indicators’, p. 17.
R1136_en.book Page 60 Friday, March 2, 2007 9:42 AM
Connections
61
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options > Send > Via
Bluetooth.
1Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 61.
5When the connection has been established, Sending
data is shown.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To pair with compatible devices and view your paired
devices, in the Bluetooth application main view, press .
Before pairing, create your own passcode (1–16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1To pair with a device, select Options > New paired
device. Devices with Bluetooth wireless technology
within range start to appear on the display.
2Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
Some audio enhancements connect automatically to your
device after pairing. Otherwise, scroll to the enhancement,
and select Options > Connect.
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust. indicates authorized devices in the paired
devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
R1136_en.book Page 61 Friday, March 2, 2007 9:42 AM
Connections
62
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See ‘Inbox—receive messages’, p. 70.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. See
‘Settings’, p. 60. Before the mode can be activated, the
two devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit passcode,
and set the other device as authorized. See ‘Pair devices’,
p. 61. Activate the remote SIM mode from the other
device.
When remote SIM mode is on in your device, Remote SIM
is displayed in the standby mode. The connection to the
wireless network is turned off, as indicated by in the
signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit remote SIM mode.
USB
Press , and select Tools > USB.
To have the device ask the purpose of the USB cable
connection each time the cable is connected, select Ask on
connection > Yes.
If Ask on connection is set to off or you want to change
the mode during an active connection, select USB mode
and from the following:
Media player—to synchronize music with Windows Media
Player. See ‘Music transfer with Windows Media Player’,
p. 24.
R1136_en.book Page 62 Friday, March 2, 2007 9:42 AM
Connections
63
PC Suite—to use to use the data cable connection for the
Nokia Nseries PC Suite
Data transfer— to transfer data between your device and
a compatible PC
Image print—to print images on a compatible printer. See
‘Image print’, p. 41.
PC connections
You can use your device with a variety of compatible PC
connectivity and data communications applications. With
Nokia Nseries PC Suite you can, for example, transfer
images between your device and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
Synchronization
Sync enables you to synchronize your notes, calendar, text
messages, or contacts with various compatible
applications on a compatible computer or on the internet.
You may receive synchronization settings in a special
message. See ‘Data and settings’, p. 71.
In the Sync main view, you can see the different
synchronization profiles. A synchronization profile
contains the necessary settings to synchronize data in your
device with a remote database on a server or compatible
device.
1Press , and select Tools > Sync.
2Select a synchronization profile and Options >
Synchronise. To cancel synchronization before it
finishes, select Cancel.
Device manager
To connect to a server and receive configuration settings
for your device, to create new server profiles, or to view
and manage existing server profiles, press , and select
Tools > Device mgr..
You may receive server profiles and different
configuration settings from your service providers and
company information management department. These
configuration settings may include connection and other
settings used by different applications in your device.
Scroll to a server profile, and select Options and from the
following:
Start configuration—to connect to the server and receive
configuration settings for your device
New server profile—to create a server profile
To delete a server profile, scroll to it, and press .
R1136_en.book Page 63 Friday, March 2, 2007 9:42 AM
Download!
64
Download!
Download! (network service) is a mobile content shop
available on your device.
With Download! you can discover, preview, buy,
download, and upgrade content, services, and
applications that work with your Nokia N76. Games,
ringing tones, wallpapers, applications, and much more
are right at hand. The items are categorized under
catalogs and folders provided by different service
providers. The available content depends on your service
provider.
Press , and select Download!.
Download! uses your network services to access the most
up-to-date content. For information on additional items
available through Download!, contact your service
provider or the supplier or manufacturer of the item.
Download! receives ongoing updates, bringing you the
latest content your service provider offers for your device.
To update the content in Download! manually, select
Options > Refresh list.
To hide a folder or a catalog from the list, for example, to
view only the items you use frequently, select Options >
Hide. To make all the hidden items visible again, select
Options > Show all.
To buy the selected item in the main view or in a folder or
catalog, select Options > Buy. A submenu opens, where
you can select the version of the item and view price
information. The available options depend on the service
provider.
To download an item that is free of charge, select
Options > Get.
Settings for Download!
The application updates your device with the most recent
content available from your service provider and other
available channels. To change the settings, select
Options > Settings and from the following:
Access point—To select which access point is used to
connect to the service provider’s server and whether to
have the device to ask for the access point every time you
use.
Automatic open—Select Yes if you want the content or
application to be opened automatically after downloading.
Preview confirmation—Select No if you want to
automatically download a preview of the content or
R1136_en.book Page 64 Friday, March 2, 2007 9:42 AM
Download!
65
application. Select Yes if you want to be asked separately
each time before downloading a preview.
Buy confirmation—Select Yes if you want to be asked for
confirmation before buying content or an application. If
you select No the buying process starts immediately after
you select the option Buy.
After you complete the settings, select Back.
R1136_en.book Page 65 Friday, March 2, 2007 9:42 AM
Time management
66
Time management
Clock
Press , and select Applications > Clock. To view your
active and inactive alarms, press . To set a new alarm,
select Options > Set alarm. When an alarm is active,
is shown.
To turn off the alarm, select Stop. To stop the alarm for
5 minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether
you want to activate the device for calls. Select No to
switch off the device or Yes to make and receive calls. Do
not select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Applications > Clock >
Options > Remove alarm.
To change clock settings, select Applications > Clock >
Options > Settings > Time or Date, Clock type, or Clock
alarm tone.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time > Auto-update.
World clock
To open the world clock view, select Clock, and press
twice. In the world clock view, you can view the time in
different cities. To add cities to the list, select Options >
Add city. You can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Calendar
Press and select Calendar. To add a new calendar
entry, scroll to the desired date, select Options > New
entry and one of the following:
1Meeting—to remind you of an appointment that has a
specific date and time
Meeting request—to create and send a new meeting
request. You need to have a mailbox set up for sending
requests. See ‘Mailbox’, p. 72.
Memo—to write a general entry for a day
R1136_en.book Page 66 Friday, March 2, 2007 9:42 AM
Time management
67
Anniversary—to remind
you of birthdays or special
dates (entries are
repeated every year)
To-do—to remind you of a
task that needs doing by a
specific date
2Fill in the fields. To set an
alarm, select Alarm > On,
and enter the Alarm time
and Alarm date.
To add a description for an
entry, select Options >
Add description.
3To save the entry, select Done.
Shortcut: In the day, week, or month calendar view,
press any key ( — ). An appointment entry opens,
and the characters you enter are added to Subject. In
the to-do view, a to-do note entry opens.
When the calendar alarms for a note, select Silence to turn
off the calendar alarm tone. The reminder text stays on the
screen. To end the calendar alarm, select Stop. To set the
alarm to snooze, select Snooze.
You can synchronize your calendar with a compatible PC
using Nokia Nseries PC Suite. When creating a calendar
entry, set the desired synchronisation option.
Calendar views
Select Options > Settings to change the starting day of
the week or the view that is shown when you open the
calendar.
To go to a certain date, select Options > Go to date. To
jump to today, press .
To switch between the month view, week view, day view,
and to-do view, press .
To send a calendar note to a compatible device, select
Options > Send.
If the other device is not compatible with Coordinated
Universal Time (UTC), the time information of received
calendar entries may not be displayed correctly.
To modify the calendar, select Options > Settings >
Calendar alarm tone, Default view, Week starts on, and
Week view title.
Manage your calendar entries
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
R1136_en.book Page 67 Friday, March 2, 2007 9:42 AM
Messaging
68
Messaging
Press , and select Messaging (network service).
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
To create a new message, select New message.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder. You can also create
and save your own templates.
Mailbox—Connect to your remote mailbox to
retrieve your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 75.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last messages that have been sent,
excluding messages sent using Bluetooth connectivity,
are stored here. To change the number of messages to be
saved, see ‘Other settings’, p. 77.
Outbox—Messages waiting to be sent are temporarily
stored in the outbox, for example, when your device is
outside network coverage.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service).
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast.
A packet data connection may prevent cell broadcast
reception.
R1136_en.book Page 68 Friday, March 2, 2007 9:42 AM
Messaging
69
Text modes
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
To switch between the letter and number mode, press and
hold . To switch between the different character
modes, press .
To insert a number in the letter mode, press and hold the
desired number key.
is displayed when you write text using traditional
text input and when using predictive text input.
With predictive text, you can enter any letter with a single
keypress. Predictive text input is based on a built-in
dictionary to which you can add new words.
To activate predictive text input, press , and select
Predictive text on.
Tip! To turn predictive text input on or off, quickly
press twice.
Write and send messages
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘E-mail settings’, p. 72 and ‘E-mail’, p. 75.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1Select New message and from the following:
Text message—to send a text message
Multimedia message—to send a multimedia message
(MMS)
Audio message—to send an audio message (a
multimedia message that includes one sound clip)
E-mail—to send an e-mail
2In the To field, press to select recipients or groups
from contacts, or enter the recipient’s phone number
or e-mail address. To add a semicolon (;) that separates
the recipients, press . You can also copy and paste
the number or address from the clipboard.
3In the Subject field, enter the subject of a multimedia
message or e-mail. To change the fields that are
visible, select Options > Address fields.
R1136_en.book Page 69 Friday, March 2, 2007 9:42 AM
Messaging
70
4In the message field,
write the message. To
insert a template, select
Options > Insert or
Insert object >
Template.
5To add a media object to
a multimedia message,
select Options > Insert
object > Image, Sound
clip, or Video clip.
6To take a new picture or
record sound or video for
a multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
7To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, Note, or Other
for other file types. E-mail attachments are indicated
by .
8To send the message, select Options > Send, or press
.
Note: Your device may indicate that your message
was sent to the message center number programmed
into your device. Your device may not indicate whether
the message is received at the intended destination.
For more details about messaging services, contact your
service provider.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options, take up more space, limiting the number
of characters that can be sent in a single message.
You may not be able to send video clips that are saved in
the .mp4 format or that exceed the size limit of the
wireless network in a multimedia message.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 74.
Inbox—receive messages
In the Inbox folder, indicates an unread text message,
an unread multimedia message, an unread audio
message, and data received through Bluetooth
connectivity.
R1136_en.book Page 70 Friday, March 2, 2007 9:42 AM
Messaging
71
When you receive a message, and 1 new message
are displayed in the standby mode. To open the message,
select Show. If the fold is closed and the message cannot
appear on the cover, Open fold to view message is
displayed. Open the cover to view the message.
When the fold is open, scroll to Inbox, and press to
open it. To reply to a received message, select Options >
Reply.
When the fold is closed and you have more than one
unread message, select Show to open Inbox. Use the
volume and quick cover keys to navigate in the Inbox
folder and when viewing messages.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
When you open a multimedia message ( ), you may see
an image and a message. is shown if sound is
included, or if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
If the message includes a multimedia presentation, is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data, such as business cards, ringing tones,
operator logos, calendar entries, and e-mail notifications.
You may also receive settings from your service provider
or company information management department in a
configuration message.
To save the data from the message, select Options and the
corresponding option.
Web service messages
Web service messages are notifications (for example, news
headlines) and may contain a text message or a link. For
availability and subscription, contact your service
provider.
R1136_en.book Page 71 Friday, March 2, 2007 9:42 AM
Messaging
72
Mailbox
E-mail settings
Tip! Use Settings Wizard to define your mailbox
settings. Press , and select Tools > Sett. wizard.
To use e-mail, you must have a valid internet access point
(IAP) in the device and define your e-mail settings
correctly. See ‘Access points’, p. 103.
If you select Mailbox in the Messaging main view and
have not set up your e-mail account, you are prompted to
do so. To start creating the e-mail settings with the
mailbox guide, select Start. See also ‘E-mail’, p. 75.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and internet
service provider (ISP).
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox, the device asks if you want
to connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection.
To view previously retrieved e-mail messages offline, select
No.
To create a new e-mail message, select New message > E-
mail in the messaging main view or Options > Create
message > E-mail in your mailbox. See ‘Write and send
messages’, p. 69.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
1When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new messages
Selected—to retrieve only the messages that have been
marked
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2If you want to close the connection and view the e-mail
messages offline, select Options > Disconnect.
R1136_en.book Page 72 Friday, March 2, 2007 9:42 AM
Messaging
73
3To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To view e-mail attachments, open the message, and select
the attachment field indicated by . If the attachment
has a dimmed indicator, it has not been retrieved to the
device; select Options > Retrieve.
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options > E-
mail settings > Automatic retrieval. For more
information, see ‘Automatic retrieval’, p. 77.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete message from:, select Phone
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete message
from:, select Phone and server.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Restore.
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
View messages on a SIM card
Before you can view SIM messages, you must copy them
to a folder in your device.
1In the Messaging main view, select Options > SIM
messages.
2Select Options > Mark/Unmark > Mark or Mark all
to mark messages.
3Select Options > Copy. A list of folders opens.
R1136_en.book Page 73 Friday, March 2, 2007 9:42 AM
Messaging
74
4To start copying, select a folder and OK. To view the
messages, open the folder.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers or access points may be
preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
Text messages
Press , and select Messaging > Options > Settings >
Text message and from the following:
Message centres—View a list of all text message centers
that have been defined.
Message centre in use—Select which message center is
used to deliver text messages.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
Message sent as—Contact your service provider to learn if
your message center is able to convert text messages into
these other formats.
Preferred connection—Select the connection to be used.
Reply via same centre—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Multimedia messages
Press , and select Messaging > Options > Settings >
Multimedia message and from the following:
Image size—Define the size of the image in a multimedia
message.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. If you select Restricted, the
device prevents you from sending messages that may not
be supported. To include content in your messages without
notifications, select Free.
Access point in use—Select which access point is used as
the preferred connection.
R1136_en.book Page 74 Friday, March 2, 2007 9:42 AM
Messaging
75
Multimedia retrieval—Select how you want to receive
messages. To receive messages automatically in your home
cellular network, select Auto in home netw.. Outside your
home cellular network, you receive a notification that
there is a message to retrieve in the multimedia message
center.
Outside your home cellular network, sending and receiving
multimedia messages may cost you more.
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home cellular network.
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Receive adverts—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Deny report sending—Select whether you want to deny
your device sending delivery reports of received messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
E-mail
Press , and select Messaging > Options > Settings >
E-mail.
To select which mailbox you want to use for sending
e-mail, select Mailbox in use and a mailbox.
Select Mailboxes and a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
To remove a mailbox and its messages from your device,
scroll to it, and press .
To create a new mailbox, select Options > New mailbox.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an internet access point (IAP).
See ‘Access points’, p. 103.
R1136_en.book Page 75 Friday, March 2, 2007 9:42 AM
Messaging
76
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting cannot be changed.
Security (ports)—Select the security option used to
secure the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to
you by your service provider.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
The settings for User name, Password, Access point in
use, Security (ports), and Port are similar to the ones in
Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces your
e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to the
mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Send copy to self—Select whether you want to send a
copy of the e-mail to your own mailbox.
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications (a tone, a note, and a mail
indicator) when new mail is received.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Partially (kB) (POP3), or Msgs. &
attachs. (POP3).
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
R1136_en.book Page 76 Friday, March 2, 2007 9:42 AM
Messaging
77
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Automatic retrieval
E-mail notifications—To automatically retrieve the
headings to your device when you receive new e-mail in
your remote mailbox, select Auto-update or Only in home
netw..
E-mail retrieval—To automatically retrieve the headings
of new e-mail messages from your remote mailbox at
defined times, select Enabled or Only in home netw..
Define when and how often the messages are retrieved.
E-mail notifications and E-mail retrieval cannot be
active at the same time.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Web service messages
Press , and select Messaging > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press , and select Messaging >
Options > Settings > Cell broadcast and from the
following:
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Other settings
Press , and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or
e-mail that you send to the Sent folder.
Number of saved msgs.—Define how many sent messages
are saved to the Sent folder at a time. When the limit is
reached, the oldest message is deleted.
R1136_en.book Page 77 Friday, March 2, 2007 9:42 AM
Messaging
78
Memory in use—If a compatible memory card is inserted
in the device, select the memory where you want to save
your messages: Phone memory or Memory card.
IM—instant messaging
Press , and select Applications > IM.
Instant messaging (network service) allows you to
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain compatible IM servers
that you can log in to after you register to an IM service.
Service providers may differ in their support of features.
Before you can use instant messaging, you must define
the settings to access the service that you want to use.
You may receive the settings in a special text message
from the service provider that offers the IM service.
For more information on instant messaging, see the
guides for your device at www.nokia.com/support or your
local Nokia website.
R1136_en.book Page 78 Friday, March 2, 2007 9:42 AM
Make calls
79
Make calls
Voice calls
1In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2Press to call the number.
3Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another
application is active. Closing the fold does not end an
active voice call.
To adjust the volume during a call, use the volume keys on
the side of your device. If you have set the volume to Mute,
select Unmute first.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press .
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 86.
To call a recently dialed number in the standby mode,
press . Scroll to the number, and press .
To send DTMF tone strings (for example, a password),
select Options > Send DTMF. Enter the DTMF string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press repeatedly. Select OK to
send the tone. You can add DTMF tones to the Phone
number or DTMF fields in a contact card.
To put an active voice call on hold while answering
another incoming call, select Options > Hold. To switch
between the active and the held call, select Options >
Swap. To connect the active and held calls and drop
yourself from the line, select Options > Transfer.
Tip! When you have only one active voice call, to put
the call on hold, press . To activate the call, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select Activate loudspeaker. If you
have attached a compatible headset with Bluetooth
connectivity, to route the sound to the headset, select
Options > Activate handsfree. To switch back to the
handset, select Options > Activate handset.
R1136_en.book Page 79 Friday, March 2, 2007 9:42 AM
Make calls
80
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all, select
Options > End all calls.
Many of the options that you can use during a voice call
are network services.
Voice mailbox
To call your voice mailbox (network service), press and
hold in the standby mode. See also ‘Call divert’,
p. 101.
To change the phone number of your voice mailbox, press
, and select Tools > call mailbox > Options > Change
number. Enter the number (obtained from your wireless
service provider), and select OK.
Make a conference call
1Make a call to the first participant.
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press .
Speed dial a phone number
To activate speed dialing, press , and select Tools >
Settings > Phone > Call > Speed dialling > On.
To assign a phone number to one of the speed dialing keys
( — ), press , and select Tools > Speed dial.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign. is reserved for
the voice mailbox, and for starting the web browser.
To call in the standby mode, press the speed dial key and
.
R1136_en.book Page 80 Friday, March 2, 2007 9:42 AM
Make calls
81
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, scroll to the number with a
voice tag, and select Options > Play voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1To start voice dialing, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialing.
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Answer or decline a call
To answer the call, press . If Answer if fold opened is
set to Yes in settings, open the fold.
To mute the ringing tone when a call comes in, select
Silence.
If you do not want to answer a call, press . If you have
activated the Call divert > If busy function to divert calls,
declining an incoming call also diverts the call. See ‘Call
divert’, p. 101.
R1136_en.book Page 81 Friday, March 2, 2007 9:42 AM
Make calls
82
When you select Silence to mute the ringing tone of the
incoming call, you can send a text message without
rejecting the call informing the caller that you cannot
answer the call. Select Options > Send text message. To
set up this option and write a standard text message, see
‘Call’, p. 100.
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Phone > Call > Call waiting (network service).
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press . To end both
calls, select Options > End all calls.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select Applications >
Log >Recent calls. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press , and select Applications >
Log >Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM card’, p. 97.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select
Applications > Log > Packet data. For example, you may
be charged for your packet data connections by the
amount of data sent and received.
R1136_en.book Page 82 Friday, March 2, 2007 9:42 AM
Make calls
83
Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data
connections registered by the device, press , select
Applications > Log, and press to open the general log.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the log duration, select Options > Settings > Log
duration. If you select No log, all the log contents, recent
calls register, and messaging delivery reports are
permanently deleted.
Tip! In the details view, you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy number.
To view from the packet data counter how much data is
transferred and how long a certain packet data
connection lasts, scroll to an incoming or outgoing event
indicated by Pack., and select Options > View details.
Push to talk
Press , and select Tools > PTT.
Push to talk (PTT) (network service) is a real-time voice
over IP service implemented over a GSM/GPRS network.
Push to talk provides direct voice communication
connected with the push of a key. Use push to talk to have
a conversation with one person or with a group of people.
Before you can use push to talk, you must define the
push-to-talk access point and push-to-talk settings. You
may receive the settings in a special text message from
the service provider that offers the push-to-talk service.
You can also use the Sett. wizard application for
configuration, if supported by your service provider.
In push-to-talk communication, one person talks while
the others listen through the built-in loudspeaker.
Speakers take turns responding to each other. Because
only one group member can talk at any time, the
R1136_en.book Page 83 Friday, March 2, 2007 9:42 AM
Make calls
84
maximum duration of a speech turn is limited. The
maximum duration is usually set to 30 seconds. For details
of the speech turn duration for your network, contact your
service provider.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Phone calls always take priority over push-to-talk
activities.
For more information on push to talk, see the guides for
your device at www.nokia.com/support or your local
Nokia website.
R1136_en.book Page 84 Friday, March 2, 2007 9:42 AM
Contacts (phonebook)
85
Contacts (phonebook)
Press , and select Contacts. In Contacts you can save
and update contact information, such as phone numbers,
home addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail image to a
contact card. You can also create contact groups, which
allow you to send text messages or e-mail to many
recipients at the same time. You can add received contact
information (business cards) to contacts. See ‘Data and
settings’, p. 71. Contact information can only be sent to or
received from compatible devices.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Contacts info.
Save and edit names and numbers
1Select Options > New contact.
2Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit. You can
also search for the desired contact by entering the first
letters of the name to the search field. A list of the
contacts starting with the letters appear on the display.
Tip! To add and edit contact cards, you can also use
Nokia Contacts Editor available in Nokia Nseries PC
Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
To listen to the voice tag assigned to the contact, select a
contact card and Options > Play voice tag. See ‘Voice
dialing’, p. 81.
To send contact information, select the card you want to
send and Options > Send > Via text message, Via
multimedia, or Via Bluetooth. See ‘Messaging’, p. 68 and
‘Send data using Bluetooth connectivity’, p. 60.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 87.
To check to which groups a contact belongs, select the
contact and Options > Belongs to groups.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press to
delete.
R1136_en.book Page 85 Friday, March 2, 2007 9:42 AM
Contacts (phonebook)
86
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1In the address book, select a contact.
2Select Options > Defaults.
3Select a default to which you want to add a number or
an address, and select Assign.
4Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press , and select Contacts > Options > SIM
contacts > SIM directory, the names you want to copy,
and Options > Copy to Contacts.
To copy contacts to your SIM card, in Contacts, select the
names you want to copy and Options > Copy to SIM
directory, or Options > Copy > To SIM directory. Only
the contact card fields supported by your SIM card are
copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia Nseries PC Suite.
SIM directory and other SIM services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dial contacts. This setting is only
shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activate fixed dialling. You
need your PIN2 code to activate and deactivate fixed
dialing or edit your fixed dialing contacts. Contact your
service provider if you do not have the code. To add new
numbers to the fixed dialing list, select Options > New
SIM contact. You need the PIN2 code for these functions.
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
R1136_en.book Page 86 Friday, March 2, 2007 9:42 AM
Contacts (phonebook)
87
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
To define a ringing tone for a contact or a contact group,
do the following:
1Press to open a contact card or go to the groups
list, and select a contact group.
2Select Options > Ringing tone. A list of ringing tones
opens.
3Select the ringing tone you want to use for the
individual contact or the selected group. You can also
use a video clip as a ringing tone.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1In Contacts, press to open the groups list.
2Select Options > New group.
3Write a name for the group or use the default name,
and select OK.
4Select the group, and Options > Add members.
5Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1In the groups list, select the group you want to modify.
2Scroll to the contact, and select Options > Remove
from group.
3Select Yes to remove the contact from the group.
R1136_en.book Page 87 Friday, March 2, 2007 9:42 AM
Office
88
Office
Calculator
Press , and select Office > Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Adobe Reader
With Adobe Reader, you can read .pdf documents on the
display of your device.
This application has been optimized for .pdf document
content on handsets and other mobile devices, and
provides only a limited set of features compared with PC
versions.
To open documents, press , and select Office > Adobe
PDF. Your recent files are listed in the file view. To open a
document, scroll to it, and press .
Use File mgr. to browse and open documents stored in the
device memory and on a compatible memory card (if
inserted).
More information
For more information, visit www.adobe.com.
To share questions, suggestions, and information about the
application, visit the Adobe Reader for Symbian OS user
forum at http://adobe.com/support/forums/main.html.
Converter
To convert measures from one unit to another, press ,
and select Office > Converter.
Converter has limited accuracy, and rounding errors may
occur.
1In the Type field, select the measure you want to use.
2In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
3In the first Amount field, enter the value you want to
convert. The other Amount field changes automatically
to show the converted value.
R1136_en.book Page 88 Friday, March 2, 2007 9:42 AM
Office
89
Set base currency and exchange rates
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must select
a base currency and add exchange rates. The rate of the
base currency is always 1.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Notes
To write notes in .txt format, press , and select
Office > Notes.
Recorder
To record voice memos, press , and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone every
5 seconds during recording.
Wireless Keyboard
To set up a compatible wireless keyboard supporting the
Bluetooth human interface devices (HID) profile for use
with your device, use the Wireless keybd. application. The
keyboard enables you to enter text in comfort, using the
full QWERTY layout, for text messages, e-mail, and
calendar entries.
1Activate Bluetooth connectivity on your device.
2Switch on the keyboard.
3Press , and select Office > Wireless keybd..
4Select Options > Find keyboard to start searching for
devices with Bluetooth connectivity.
5Select the keyboard from the list, and press to start
the connection.
6To pair the keyboard with your device, enter a passcode
of your choice (1 to 9 digits) on the device and the
same passcode on your keyboard.
To enter the digits of the passcode, you may need to
press the Fn key first.
7If you are asked for a keyboard layout, select it from a
list on your device.
8When the name of the keyboard appears, its status
changes to Keyboard connected, and the green
indicator of your keyboard blinks slowly; the keyboard
is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.
R1136_en.book Page 89 Friday, March 2, 2007 9:42 AM
Tools
90
Tools
Application manager
Press , and select Tools > App. mgr.. You can install
two types of applications and software to your device:
•J2ME
™ applications based on Java™ technology with
the extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis or .sisx extension. Only install software
specifically designed for your Nokia N76. Software
providers will often refer to the official model number
of this product: the Nokia N76-1.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity. You can use
Nokia Application Installer in Nokia Nseries PC Suite to
install an application to your device. If you use Microsoft
Windows Explorer to transfer a file, save the file to a
compatible memory card (local disk).
Install applications and software
indicates a .sis application, a Java application,
that the application is not fully installed, and that the
application is installed on the memory card.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java Verified™
testing.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, in Certificates, select View details. See
‘Certificate management’, p. 98.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
R1136_en.book Page 90 Friday, March 2, 2007 9:42 AM
Tools
91
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1To locate an installation file, press , and select
Tools > App. mgr.. Alternatively, search the device
memory or a compatible memory card (if inserted) in
File mgr., or open a message in Messaging > Inbox
that contains an installation file.
2In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press . If the application does not have a default folder
defined, it is installed in the Applications folder.
To see which software packages are installed or removed
and when, select Options > View log.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
memory, use Nokia Nseries PC Suite to back up
installation files to a compatible PC, then use the file
manager to remove the installation files from the device
memory. See ‘File manager’, p. 19. If the .sis file is a
message attachment, delete the message from the
Messaging inbox.
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if you
have the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
If another software package depends on the software
package that you removed, the other software package
R1136_en.book Page 91 Friday, March 2, 2007 9:42 AM
Tools
92
may stop working. Refer to the documentation of the
installed software package for details.
Settings
Select Options > Settings and from the following:
Software installation—Select whether Symbian software
that has no verified digital signature can be installed.
Online certificate check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a message to be sent
or a network connection to a specific access point for
downloading extra data or components. In the App. mgr.
main view, scroll to an application, and select Options >
Open to change settings related to that specific
application.
Digital rights management
Content owners may use different types of digital rights
management (DRM) technologies to protect their
intellectual property, including copyrights. This device
uses various types of DRM software to access
DRM-protected content. With this device you can access
content protected with WMDRM 10, OMA DRM 1.0 and
OMA DRM 2.0. If certain DRM software fails to protect the
content, content owners may ask that such DRM
software's ability to access new DRM-protected content
be revoked. Revocation may also prevent renewal of such
DRM-protected content already in your device. Revocation
of such DRM software does not affect the use of content
protected with other types of DRM or the use of non-DRM-
protected content.
Digital rights management (DRM) protected content
comes with an associated activation key that defines your
rights to use the content.
If your device has OMA DRM protected content, to back up
both the activation keys and the content, use the backup
feature of Nokia Nseries PC Suite. Other transfer methods
may not transfer the activation keys which need to be
restored with the content for you to be able to continue
the use of OMA DRM protected content after the device
memory is formatted. You may also need to restore the
activation keys in case the files on your device get
corrupted.
If your device has WMDRM protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation keys
and the content in case the files on your device get
corrupted. Losing the activation keys or the content may
R1136_en.book Page 92 Friday, March 2, 2007 9:42 AM
Tools
93
limit your ability to use the same content on your device
again. For more information, contact your service provider.
Some activation keys may be connected to a specific SIM
card, and the protected content can be accessed only if the
SIM card is inserted in the device.
To view the digital rights activation keys stored in your
device, press , and select Tools > Actv. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get new key. Activation keys cannot be updated if web
service message reception is disabled. See ‘Web service
messages’, p. 71.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 81.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice comm.
application and its Profiles folder. Press , and select
Tools > Voice comm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list. To use
enhanced voice commands when the fold is closed, press
and hold the forward key.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
R1136_en.book Page 93 Friday, March 2, 2007 9:42 AM
Tools
94
recognition learning, for example, when the main user of
the device has changed, select Remove voice adapts..
Positioning
Press , and select Applications > GPS data or
Landmarks.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments
to GPS satellites made by the United States government
and is subject to change with the United States
Department of Defense civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also be affected by
poor satellite geometry. Availability and quality of GPS
signals may be affected by your location, buildings,
natural obstacles, and weather conditions. The GPS
receiver should only be used outdoors to allow reception
of GPS signals.
GPS should only be used as a navigation aid. It should not
be used for precise location measurement and you should
never rely solely on location data from the GPS receiver
for positioning or navigation.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
With Landmarks, you can save and view the position
information of specifc locations in your device. With GPS
data, you can access route guidance information to a
selected destination, position information about your
current location, and traveling information, such as the
approximate distance to the destination and approximate
duration of travel.
Landmarks and GPS data may be network based (network
service) or they may require that you use a compatible GPS
receiver.
For more information on Landmarks and GPS data, see the
guides for your device at www.nokia.com/support or your
local Nokia website.
R1136_en.book Page 94 Friday, March 2, 2007 9:42 AM
Settings
95
Settings
To change settings, press , and select Tools > Settings.
Scroll to General, Phone, Connection, or Applications,
and press . Scroll to a setting or setting group you want
to change, and press .
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
General
To edit the general settings of your device or restore the
original default device settings, press , and select
Tools > Settings > General > Personalisation, Date and
time, Cover display, Enhancement, Security, Factory
settings, or Positioning.
For Date and time, see ‘Clock’, p. 66.
Personalisation
To edit settings related to the display, standby mode, and
general functionality of your device, press , and select
Tools > Settings > General > Personalisation.
Tones allows you to change the tones of calendar, clock,
and the currently active profile.
Themes opens the application. See ‘Change the look of
your device’, p. 49.
Voice comms. opens the settings for the application. See
‘Voice commands’, p. 93.
Display
Light sensor—Press or to adjust the light sensor
that observes the lighting conditions and adjusts the
brightness of the display. The light sensor may cause the
display to flicker in low light.
Font size—Adjust the size of the text and icons on the
display.
Power saver time-out—Select the time-out period after
which the power saver is activated.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
R1136_en.book Page 95 Friday, March 2, 2007 9:42 AM
Settings
96
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 50.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
Shortcuts > Left selection key and Right selection key—
Assign a shortcut to the selection keys in the standby
mode.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Language
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according
to the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—Set the predictive text input On or Off for
all editors in the device. The predictive text dictionary is
not available for all languages.
Cover display
Brightness—Close the fold, and use the volume key to
adjust the brightness on the cover display.
Answer if fold opened—Select Yes if you want to answer
incoming calls by opening the fold.
Sleep mode—Select whether the display is switched off to
save battery power after the power saver is activated.
When the display is switched off, an LED blinks to indicate
that the device is powered on.
Enhancement
For enhancement indicators, see ‘Essential
indicators’, p. 17. Some enhancement connectors do not
indicate which type of an enhancement is connected to
the device.
R1136_en.book Page 96 Friday, March 2, 2007 9:42 AM
Settings
97
The available settings depend on the type of enhancement.
Select an enhancement and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See ‘Profiles—set tones’, p. 48.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a Text phone or a Loopset, you must
activate it on your device. To activate Text phone, select
Text phone > Use text phone > Yes. To activate the
loopset, select Loopset > Use loopset > Yes.
Security
To edit settings related to the security, press , and
select Tools > Settings > General > Security > Phone
and SIM card, Certificate management, or Security
module.
Phone and SIM card
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 98.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Keypad autolock period—Select whether the keypad is
locked when your device has been idle for a certain period
of time.
Tip! To lock or unlock the keypad manually, press ,
then
Phone autolock period—To avoid unauthorized use, you
can set a time-out after which the device automatically
locks. A locked device cannot be used until the correct lock
code is entered. To turn off the autolock period, select
None.
See ‘Glossary of PIN and lock codes’, p. 98.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
R1136_en.book Page 97 Friday, March 2, 2007 9:42 AM
Settings
98
Lock if SIM card changed—You can set the device to ask
for the lock code when an unknown SIM card is inserted
into your device. The device maintains a list of SIM cards
that are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network
service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
R1136_en.book Page 98 Friday, March 2, 2007 9:42 AM
Settings
99
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
"Expired certificate" or "Certificate not valid yet" is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
Certificate not trusted—You have not set any application
to use the certificate. See ‘Change the trust settings’, p.
99.
Expired certificate—The period of validity has ended for
the selected certificate.
Certificate not valid yet—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
Internet: Yes—The certificate is able to certify servers.
App. installation: Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
R1136_en.book Page 99 Friday, March 2, 2007 9:42 AM
Settings
100
Security module
To view or edit a security module (if available) in Security
module, scroll to it, and press . To view detailed
information about a security module, scroll to it, and
select Options > Security details.
Factory settings
To reset some of the settings to their original values,
select Tools > Settings > General > Factory settings. To
do this, you need the lock code. See ‘Phone and SIM card’,
p. 97. After resetting, the device may take a longer time to
power on. Documents and files are unaffected.
Positioning
Select the used Positioning methods to detect the
location of your device: Bluetooth GPS to use a
compatible external GPS receiver with Bluetooth
connectivity, and Network based to use information from
the cellular network (network service). The location
information can be used by compatible applications in
your device.
Phone
To edit the settings related to making and receiving calls,
press , and select Tools > Settings > Phone > Call,
Call divert, Call barring, or Network.
Call
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription (Set by network)
(network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 81.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
R1136_en.book Page 100 Friday, March 2, 2007 9:42 AM
Settings
101
Show call duration—Activate this setting if you want the
length of a call to be displayed during the call.
Summary after call—To have the duration of a call briefly
displayed after the call, select On.
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys ( – ) can be dialed by pressing
and holding the key. See also ‘Speed dial a phone number’,
p. 80.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and .
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Call divert
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. Set
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check status).
Several diverting options can be active at the same time.
When all calls are diverted, is shown in the
standby mode.
Call barring and call diverting cannot be active at the
same time.
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
R1136_en.book Page 101 Friday, March 2, 2007 9:42 AM
Settings
102
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to certain
official emergency numbers.
Network
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Connection
To edit access point and other connection settings, press
, and select Tools > Settings > Connection >
Bluetooth, USB, Access points, Packet data, Data call,
SIP settings, Configurations, or Access point name
control.
For USB settings, see ‘USB’, p. 62.
For Bluetooth settings, see ‘Settings’, p. 60.
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in a GSM network, multiple data connections
can be active at the same time, and access points can share
a data connection.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Internet access point (IAP) to send and receive e-mail
and connect to the internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
R1136_en.book Page 102 Friday, March 2, 2007 9:42 AM
Settings
103
Access points
You may receive access point settings in a message from a
service provider. See ‘Data and settings’, p. 71. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them. indicates a protected access point, and
indicates a packet data access point.
To create a new access point, select Options > New access
point.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service
provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service
provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary DNS address, enter the IP
address of the primary DNS server. In Secondary DNS
R1136_en.book Page 103 Friday, March 2, 2007 9:42 AM
Settings
104
address, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Proxy server address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data connection—If you select When available
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker. If there is no packet data
coverage, the device periodically tries to establish a
packet data connection. If you select When needed, the
device uses a packet data connection only if you start an
application or action that needs it.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
Data call
The data call settings affect all access points using a GSM
data call connection.
Online time—Set the data calls to automatically
disconnect after a time-out if there is no activity. To enter
a time-out, select User defined, and enter the time in
minutes. if you select Unlimited, data calls are not
automatically disconnected.
SIP settings
SIP (session initiation protocol) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service
provider. You can view, delete, or create these setting
profiles in SIP settings.
Configurations
You may receive trusted server settings from your service
provider in a configuration message. You can save view or
delete these settings in Configurations.
Access point name control
With Access point name control service, you can restrict
packet data connections and allow your device to use only
certain packet data access points.
This setting is only available if your SIM card supports the
access point control service.
R1136_en.book Page 104 Friday, March 2, 2007 9:42 AM
Settings
105
To set the control service on or off or to change the
allowed access points, select Options and the
corresponding option. To change the options, you need
your PIN2 code. Contact your service provider for the code.
Applications
To edit the settings of some of the applications in your
device, press , and select Tools > Settings >
Applications. The settings are also available in each
application by selecting the settings option.
R1136_en.book Page 105 Friday, March 2, 2007 9:42 AM
Troubleshooting: Q&A
106
Troubleshooting: Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your wireless service
provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP) or wireless service provider.
Battery
Q: Why does my battery drain fast?
A: Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce battery life time.
Also packet data connections increase the demand on
battery power. If you have set Packet data connection to
When available in Connection settings, and there is no
packet data coverage (GPRS), your device periodically tries
to establish a packet data connection, which causes the
increased demand on battery power.
To prolong the operating time of your device, turn the
Bluetooth technology off when you do not need it. Also
set Packet data connection to When needed. To close all
the applications that are running in the background, and
you do not use, press and hold , and select the
applications from the list. Then exit the application.
Application not responding
Q: How do I close an application that is not responding?
A: Press and hold . Scroll to the application, and press
to close the application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices are compatible, have activated
Bluetooth connectivity, and are not in hidden mode. Check
also that the distance between the two devices is not over
10 meters (33 feet) and that there are no walls or other
obstructions between the devices.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Tools >
Bluetooth > Bluetooth > Off.
Camera
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows are clean.
Display
R1136_en.book Page 106 Friday, March 2, 2007 9:42 AM
Troubleshooting: Q&A
107
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Memory low
Q: What can I do if my device memory is low?
A: You can delete unused items saved in your device regularly
to avoid memory getting low. See ‘Memory low—free
memory’, p. 20.
To delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are
deleting multiple items and one of the following notes are
shown: Not enough memory to perform operation.
Delete some data first. or Memory low. Delete some
data from phone memory., try deleting items one by one
(starting from the smallest item).
To view what kind of data you have and how much memory
the different data groups consume, press , and select
Tools > File manager > Options > Memory details.
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia Nseries PC Suite to make a backup copy of all
data to a compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Multimedia messaging
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Press , and select Messaging >
Options > Settings > Multimedia msg..
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, press
, and select Messaging > Options > Settings >
Multimedia message > Multimedia retrieval and one of
the following:
Manual—to have the multimedia messaging center save
messages to be retrieved later. You receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message center.
R1136_en.book Page 107 Friday, March 2, 2007 9:42 AM
Troubleshooting: Q&A
108
Off—to ignore all incoming multimedia messages. After
this change, the device does not make any network
connections related to multimedia messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my
PC?
A: Make sure that Nokia Nseries PC Suite is installed and
running on your PC. See the user guide for Nokia Nseries
PC Suite on the CD-ROM. For further information on how
to use Nokia Nseries PC Suite, see the help function on
Nokia PC Suite or visit the support pages at
www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming
fax calls to another phone number.
R1136_en.book Page 108 Friday, March 2, 2007 9:42 AM
Battery information
109
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The battery
can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact with
the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
R1136_en.book Page 109 Friday, March 2, 2007 9:42 AM
Battery information
110
from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic,
original Nokia battery, you should refrain from using it, and
take it to the nearest authorized Nokia service point or dealer
for assistance. Your authorized Nokia service point or dealer
will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of
purchase.
Authenticate hologram
1 When looking at the hologram
on the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another angle.
2When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
3Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed by
the bottom row.
4 Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
To create a text message, enter the
20-digit code, for example, 12345678919876543210, and
send to +44 7786 200276.
To create a text message,
• For countries in Asia Pacific, excluding India: Enter the
20-digit code, for example, 12345678919876543210, and
send to +61 427151515.
• For India only: Enter Battery followed by the 20-digit
battery code, for example, Battery
12345678919876543210, and send to 5555.
National and international operator charges will apply.
R1136_en.book Page 110 Friday, March 2, 2007 9:42 AM
Battery information
111
You should receive a message indicating whether the code can
be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
R1136_en.book Page 111 Friday, March 2, 2007 9:42 AM
Care and maintenance
112
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes.
• To reset the device from time to time for optimum
performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility for
service.
R1136_en.book Page 112 Friday, March 2, 2007 9:42 AM
Additional safety information
113
Additional safety information
Small children
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 1.5 centimeters (5/8 inches) away from the body. When
a carry case, belt clip, or holder is used for body-worn
operation, it should not contain metal and should position the
device the above-stated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases, transmission
of data files or messages may be delayed until such a
connection is available. Ensure the above separation distance
instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you
have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Implanted medical devices Manufacturers of medical
devices recommend that a minimum separation of 15.3
centimeters (6 inches) should be maintained between a
wireless device and an implanted medical device, such as a
pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who
have such devices should:
• Always keep the wireless device more than
15.3 centimeters (6 inches) from the medical device when
the wireless device is turned on.
• Do not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical
device to minimize the potential for interference.
• Turn the wireless device off immediately if there is any
reason to suspect that interference is taking place.
R1136_en.book Page 113 Friday, March 2, 2007 9:42 AM
Additional safety information
114
• Read and follow the directions from the manufacturer of
the implanted medical device.
If you have any questions about using your wireless device
with an implanted medical device, consult your health care
provider.
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that
has been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
R1136_en.book Page 114 Friday, March 2, 2007 9:42 AM
Additional safety information
115
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call: 1If the device is not on,
switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2Press the end key as many times as needed to clear the
display and ready the device for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in the offline or flight profile mode, you may need to
change the profile to activate the phone function before you
can make an emergency call. Consult this guide or your service
provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.95 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
R1136_en.book Page 115 Friday, March 2, 2007 9:42 AM
Additional safety information
116
Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is 1.22
W/kg and when properly worn on the body is 1.15 W/kg.
Information about this device model can be found at http://
www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC ID: OW3RM-149.
R1136_en.book Page 116 Friday, March 2, 2007 9:42 AM