Microsoft RM-274 GSM 900/ 1800/ 1900 Cellphone with Bluetooth User Manual Manual

Microsoft Mobile Oy GSM 900/ 1800/ 1900 Cellphone with Bluetooth Manual

Manual

Nokia 3109 classic User Guide9200417Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 1 May 8, 2007 4:09:52 PM
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-274 product is in compliance with theessential requirements and other relevant provisions of Directive 1999/5/EC. A copy of theDeclaration of Conformity can be found at www.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia Care, Visual Radio, and Navi are trademarks or registered trademarks of NokiaCorporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned hereinmay be trademarks or tradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without theprior written permission of Nokia is prohibited.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. TegicCommunications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use inconnection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumerengaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by alicensed video provider. No license is granted or shall be implied for any other use. Additional information, includingthat related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to anyof the products described in this document without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITSLICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECTDAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OFANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THISDOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.The availability of particular products and applications for these products may vary by region. Please check with yourNokia dealer for details, and availability of language options.The third-party applications provided with your device may have been created and may be owned by persons or entitiesnot affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the0434CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 2 May 8, 2007 4:09:52 PM
applications, or the information in the applications or these materials. Nokia does not provide any warranty for thethird-party applications.BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OFANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGETHAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDINGBUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THEAPPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US andother countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receivingequipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot beeliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCCrules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Anychanges or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.Check www.nokia.com/support to get the latest version of this guide, contacts, information andadditional services and also to download PC Suite and other software. Consult the nearest servicepoint and set up your phone.9200417/Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 3 May 8, 2007 4:09:52 PM
ContentsFor your safety ................................7About your device...........................8Network services.............................9Shared memory...............................9Enhancements...............................101. General information................11Access codes....................................................11Configuration setting service....................12Download content........................................12Software updates..........................................12Nokia support.................................................132. Get started.................................14Install SIM card and battery.......................14Insert a microSD card...................................15Charge the battery........................................16Antenna............................................................17Headset.............................................................17Strap..................................................................173. Your device................................18Keys and parts................................................18Switch the device on and off.....................19Standby mode................................................19Flight mode.....................................................22Keypad lock (keyguard)...............................23Functions without a SIM card....................234. Call functions.............................24Make a call.......................................................24Answer or reject a call..................................25Options during a call....................................255. Write text...................................26Text modes......................................................26Traditional text input...................................27Predictive text input.....................................276. Navigate the menus.................277. Messaging..................................28Text messages................................................28Multimedia messages..................................29Message sending process...........................31Postcards..........................................................32Flash messages..............................................32Nokia Xpress audio messaging.................33Memory full.....................................................33Folders..............................................................34E-mail application.........................................34Instant messages..........................................37Voice messages..............................................41Info messages................................................41Service commands........................................41Delete messages............................................41SIM messages..................................................42Message settings...........................................428. Contacts......................................44Save names and phone numbers.............45Save details.....................................................45Settings.............................................................45Groups...............................................................46Search for a contact......................................46Copy or move contacts.................................46Edit contact details.......................................47Delete contacts...............................................47Synchronize all...............................................47Business cards................................................47Dialing shortcuts............................................48Info, service, and my numbers..................48CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 4 May 8, 2007 4:09:52 PM
9. Call log.........................................4910. Positioning..............................4911. Settings....................................50Profiles..............................................................50Themes.............................................................50Tones.................................................................51Display...............................................................51Time and date................................................52My shortcuts....................................................52Infrared.............................................................53Bluetooth.........................................................54Packet data......................................................55Data transfer...................................................56USB data cable................................................58Call......................................................................58Phone................................................................59Enhancements................................................60Configuration..................................................60Security.............................................................61Software updates over the air..................62Restore factory settings..............................6312. Operator menu.......................6413. Gallery.......................................64Folders and files.............................................64Print images....................................................65Memory card...................................................6514. Media........................................66Media player....................................................66Music player.....................................................67Voice recorder................................................68Equalizer...........................................................69Stereo widening............................................6915. Push to talk..............................70PTT channels...................................................70Switch PTT on and off..................................71Make and receive a PTT call........................71Callback requests...........................................72Add a one-to-one contact...........................73PTT settings.....................................................73Configuration settings.................................7416. Applications.............................74Launch a game...............................................74Launch an application..................................75Application options......................................75Download an application............................7517. Organizer.................................76Alarm clock......................................................76Calendar............................................................77To-do list..........................................................77Notes.................................................................78Calculator.........................................................78Timers...............................................................79Stopwatch........................................................7918. Web...........................................80Set up browsing.............................................80Connect to a service......................................80Browse pages.................................................81Bookmarks.......................................................81Appearance settings.....................................82Security settings............................................83Download settings........................................83Service inbox...................................................83Cache memory................................................84Browser security............................................8519. SIM services.............................8620. PC connectivity........................87Nokia PC Suite.................................................87Packet data, HSCSD, and CSD......................87Bluetooth.........................................................88Data communication applications...........8821. Battery......................................88Battery information......................................88ContentsCyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 5 May 8, 2007 4:09:52 PM
Nokia battery authenticationguidelines........................................................89Care and maintenance.................92Disposal............................................................93Additional safetyinformation....................................93Small children.................................................93Operating environment...............................93Medical devices..............................................94Vehicles.............................................................95Potentially explosiveenvironments.................................................96Emergency calls..............................................96CERTIFICATION INFORMATION(SAR)..................................................................97Index................................................99ContentsCyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 6 May 8, 2007 4:09:52 PM
For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read thecomplete user guide for further information.SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or whenit may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle whiledriving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless devices may be susceptible to interference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation.Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.7CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 7 May 8, 2007 4:09:52 PM
ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all importantinformation stored in your device.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safetyinstructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone function of the device is switched on and in service. Pressthe end key as many times as needed to clear the display and return to thestandby mode. Enter the emergency number, then press the call key. Give yourlocation. Do not end the call until given permission to do so.About your deviceThe wireless device described in this guide is approved for use on the on theEGSM 900 and GSM 1800 and 1900 networks. Contact your service provider formore information about networks.When using the features in this device, obey all laws and respect local customs,privacy and legitimate rights of others, including copyrights.Copyright protections may prevent some images, music (including ringingtones), and other content from being copied, modified, transferred, orforwarded.About your device8CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 8 May 8, 2007 4:09:52 PM
Warning:  To use any features in this device, other than the alarm clock, thedevice must be switched on. Do not switch the device on when wireless deviceuse may cause interference or danger.Network servicesTo use the phone you must have service from a wireless service provider. Many of thefeatures require special network features. These features are not available on allnetworks; other networks may require that you make specific arrangements with yourservice provider before you can use the network services. Your service provider can giveyou instructions and explain what charges will apply. Some networks may havelimitations that affect how you can use network services. For instance, some networksmay not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or notactivated in your device. If so, these features will not appear on your device menu. Yourdevice may also have a special configuration such as changes in menu names, menuorder, and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Somefeatures of this device, such as multimedia messaging (MMS), e-mail application, instantmessaging, remote synchronization, and content downloading using the browser orMMS, require network support for these technologies.Shared memoryThe following features in this device may share memory: gallery, contacts, text messages,multimedia messages, and instant messages, e-mail, calendar, to-do notes, Java™ gamesand applications, and note application. Use of one or more of these features may reducethe memory available for the remaining features sharing memory. Your device maydisplay a message that the memory is full when you try to use a shared memory feature.Network services9CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 9 May 8, 2007 4:09:52 PM
In this case, delete some of the information or entries stored in the shared memoryfeatures before continuing.EnhancementsPractical rules about accessories and enhancements•Keep all accessories and enhancements out of the reach of small children.•When you disconnect the power cord of any accessory or enhancement, grasp and pullthe plug, not the cord.•Check regularly that enhancements installed in a vehicle are mounted and areoperating properly.•Installation of any complex car enhancements must be made by qualified personnelonly.Enhancements10CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 10 May 8, 2007 4:09:52 PM
1. General informationAccess codesSecurity codeThe security code (5 to 10 digits) helps to protect your phone againstunauthorized use. The preset code is 12345. You can change the code, and setthe phone to request the code. See "Security," p. 61.PIN codesThe personal identification number (PIN) code and the universal personalidentification number (UPIN) code (4 to 8 digits) help to protect your SIM cardagainst unauthorized use. See "Security," p. 61.The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is requiredfor some functions.The module PIN is required to access the information in the security module.See "Security module," p. 85.The signing PIN is required for the digital signature. See "Digitalsignature," p. 86.PUK codesThe personal unblocking key (PUK) code and the universal personal unblockingkey (UPUK) code (8 digits) are required to change a blocked PIN code and UPINcode, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2code. If the codes are not supplied with the SIM card, contact your local serviceprovider for the codes.Restriction passwordThe restriction password (4 digits) is required when using Call barringservice. See "Security," p. 61.11CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 11 May 8, 2007 4:09:52 PM
Configuration setting serviceTo use some of the network services, such as mobile internet services, MMS,Nokia Xpress audio messaging, or remote internet server synchronization, yourdevice needs the correct configuration settings. For more information onavailability, contact your service provider, the nearest authorized Nokia dealer,or visit the support area on the Nokia website. See "Nokia support," p. 13.When you have received the settings as a configuration message and thesettings are not automatically saved and activated, Configuration sett.received is displayed.To save the settings, select Show > Save. If required, enter the PIN codesupplied by the service provider .To discard the received settings, select Exit or Show > Discard.Download contentYou may be able to download new content (for example, themes) to your phone(network service).Important:  Use only services that you trust and that offer adequatesecurity and protection against harmful software.For the availability of different services, pricing, and tariffs, contact your serviceprovider.Software updatesNokia may produce software updates that may offer new features, enhancedfunctions, or improved performance. You may be able to request these updatesthrough the Nokia Software Updater PC application. To update the devicesoftware, you need the Nokia Software Updater application and a compatiblePC with Microsoft Windows 2000 or XP operating system, broadband internetaccess, and a compatible data cable to connect your device to the PC.General information12CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 12 May 8, 2007 4:09:52 PM
To get more information and to download the Nokia Software Updaterapplication, visit www.nokiausa.com/softwareupdate or your local Nokiawebsite.If software updates over the air are supported by your network, you may alsobe able to request updates through the device.See "Software updates over the air," p. 62.Downloading software updates may involve the transmission of large amountsof data through your service provider's network. Contact your service providerfor information about data transmission charges.Make sure that the device battery has enough power, or connect the chargerbefore starting the update.Important:  Use only services that you trust and that offer adequatesecurity and protection against harmful software.Nokia supportSupport informationCheck www.nokia.com/support or your local Nokia website for the latestversion of this guide, additional information, downloads, and services relatedto your Nokia product.Configuration settings serviceYou may also download free configuration settings such as MMS, GPRS, e-mail,and other services for your device model at www.nokia.com/support.Nokia PC SuiteYou may find PC Suite and related information on the Nokia website atwww.nokia.com/support.General information13CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 13 May 8, 2007 4:09:52 PM
Customer serviceIf you need to contact customer service, check the list of localNokia Care contact centers at www.nokia.com/customerservice.MaintenanceFor maintenance services, check your nearest Nokia service center atwww.nokia.com/repair.2. Get startedInstall SIM card and batteryAlways switch the device off and disconnect the charger before removing thebattery.For availability and information on using SIM card services, contact your SIMcard vendor. This may be the service provider or other vendor.This device is intended for use with a BL-5C battery. Always use original Nokiabatteries. See "Nokia battery authentication guidelines," p. 89.The SIM card and its contacts can be easily damaged by scratches or bending,so be careful when handling, inserting, or removing the card.1. Slide the release button (1) tounlock and remove the backcover (2). Remove the battery asshown (3).Get started14CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 14 May 8, 2007 4:09:52 PM
2. Open the SIM card holder (4).Insert the SIM card (5) with thecontact surface facing down intothe holder. Close the SIM cardholder (6).3. Observe the battery contacts (7),and insert the battery (8). Placethe upper part of the back coveron the device (9), and close it(10).Insert a microSD cardUse only compatible microSD cards approved by Nokia for use with this device.Nokia uses approved industry standards for memory cards, but some brandsmay not be fully compatible with this device. Incompatible cards may damagethe card and the device and corrupt data stored on the card.1. Switch the device off, and remove the back cover and the battery of thedevice.2. Slide the memory card holder to unlock (1).3. Open the card holder (2), and insert the memory cardinto the card holder with the contact surface facinginwards (3).Get started15CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 15 May 8, 2007 4:09:52 PM
4. Close the card holder (4), and slide the card holder tolock it (5).5. Insert the battery, and attach the back cover to the device.Charge the batteryCheck the model number of any charger before use with this device. This deviceis intended for use when supplied with power from the AC-3 or AC-4 charger.Warning:  Use only batteries, chargers, and enhancements approvedby Nokia for use with this particular model. The use of any other typesmay invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer.When you disconnect the power cord of any enhancement, grasp and pull theplug, not the cord.1. Connect the charger to a wall socket.2. Connect the lead from the charger to the socket on thebottom of your device.If the battery is completely discharged, it may take a fewminutes before the charging indicator appears on thedisplay or before any calls can be made.The charging time depends on the charger used. Charginga BL-5C battery with the AC-3 charger takes approximately 2 hours and 45minutes while the device is in the standby mode.Get started16CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 16 May 8, 2007 4:09:52 PM
AntennaYour device has an internal antenna.Note:  As with any other radio transmittingdevice, do not touch the antennaunnecessarily when the device is switchedon. Contact with the antenna affects callquality and may cause the device to operateat a higher power level than otherwiseneeded. To optimize antenna performanceand battery life, avoid contact with theantenna area when operating the device.HeadsetWarning:  Listen to music at a moderate level. Continuous exposure tohigh volume may damage your hearing.Pay special attention to volume level if you connect any other headsets to thedevice.Warning:  When you use the headset, your ability to hear outsidesounds may be affected. Do not use the headset where it can endangeryour safety.Do not connect products that create an output signal as this may causedamage to the device. Do not connect any voltage source to the NokiaAV Connector.When connecting any external device or any headset, other than thoseapproved by Nokia for use with this device, to the Nokia AV Connector,pay special attention to volume levels.Strap1. Open the back cover.Get started17CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 17 May 8, 2007 4:09:52 PM
2. Hook a strap behind the clamp as shown in thepicture (1) and close the back cover (2).3. Your deviceKeys and parts1 — Earpiece2 — Display3 — Left selection key4 — Call key5 — Infrared (IR) port6 — Navi™ key: 4-way scroll key and middle selection key7 — Right selection key8 — End key9 — Keypad10 — MicrophoneYour device18CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 18 May 8, 2007 4:09:52 PM
11 — Charger connector12 — Nokia AV Connector (2.5 mm)13 — Mini USB cable connector14 — Volume down key15 — Volume up key16 — Power key17 — LoudspeakerSwitch the device on and offTo switch the device on or off, press and hold the power key. See "Keys andparts," p. 18.If the device prompts for a PIN or a UPIN code, enter the code (displayed as****), and select OK.The device may prompt you to set the time and date. Enter the local time, selectthe time zone of your location in terms of the time difference with respect toGreenwich mean time (GMT), and enter the date. See "Time anddate," p. 52.When you switch on your device for the first time and the device is in thestandby mode, you may be prompted to get the configuration settings fromyour service provider (network service). For more information refer to Connectto service provider support. See "Configuration," p. 60. See "Configurationsetting service," p. 12.Standby modeWhen the device is ready for use, and you have not entered any characters, thedevice is in the standby mode.Your device19CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 19 May 8, 2007 4:09:52 PM
Display1 — Signal strength of the cellular network 2 — Battery charge status 3 — Indicators4 — Name of the network or the operator logo5 — Clock6 — Main screen7 — The function of the left selection key is Go to or a shortcut to anotherfunction. See "Left selection key," p. 52.8 — The function of the middle selection key is Menu.9 — The function of the right selection key is Names or a shortcut to anotherfunction. See "Right selection key," p. 52. Operator variants may have anoperator-specific name to access an operator-specific website.Power savingYour device has a Power saver and a Sleep mode feature in order to savebattery power in the standby mode when no key of the device is pressed. Thesefeatures may be activated. See "Display," p. 51.Your device20CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 20 May 8, 2007 4:09:52 PM
Active standbyThe active standby mode displays a list of selected device features andinformation that you can directly access.To switch active standby on or off, select Menu > Settings > Display >Active standby > Active standby mode > On or Off.In the standby mode, scroll up or down to navigate in the list, and chooseSelect or View. The arrows indicate that further information is available. Tostop navigation, select Exit.To organize and change the active standby mode, select Options and from theavailable options.Shortcuts in the standby modeTo access the list of dialed numbers, press the call key once. Scroll to the numberor name, and press the call key to call the number.To open the web browser, press and hold 0.To call your voice mailbox, press and hold 1.Use keys as a shortcut. See "My shortcuts," p. 52.Indicators  unread messages  unsent, canceled, or failed messages  missed call/  Your phone is connected to the IM service, and the availability status isonline or offline.  instant messages received  The keypad is locked.  The phone does not ring for an incoming call or text message.Your device21CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 21 May 8, 2007 4:09:52 PM
  The alarm clock is activated.  The countdown timer is running.  The stopwatch is running in the background./  The phone is registered to the GPRS or EGPRS network./  A GPRS or EGPRS connection is established./  The GPRS or EGPRS connection is suspended (on hold).  A Bluetooth connection is active./  A push-to-talk connection is active or suspended.  If you have two phone lines, the second phone line is selected.  All incoming calls are forwarded to another number.  The loudspeaker is activated, or the music stand is connected to the device.  Calls are limited to a closed user group.  The timed profile is selected./ /   A headset, handsfree, or loopset is connected to the device.Flight modeYou can deactivate all radio frequency functions and still have access to offlinegames, calendar, and phone numbers.Use the flight mode in radio sensitive environments—on board aircraft or inhospitals. When the flight mode is active,  is shown.Select Menu > Settings > Profiles > Flight > Activate or Personalise toactivate or set up the flight mode.To deactivate the flight mode, select any other profile.Emergency call in flight mode - Enter the emergency number, press the callkey, and select Yes when Exit flight profile? is displayed. The phone attemptsto make an emergency call.Your device22CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 22 May 8, 2007 4:09:52 PM
Warning:  With the flight profile you cannot make or receive any calls,including emergency calls, or use other features that require networkcoverage. To make calls, you must first activate the phone function bychanging profiles. If the device has been locked, enter the lock code. Ifyou need to make an emergency call while the device is locked and inthe flight profile, you may be also able to enter an official emergencynumber programmed in your device in the lock code field and select'Call'. The device will confirm that you are about to exit flight profile tostart an emergency call.Keypad lock (keyguard)To prevent accidental keypresses, select Menu, and press * within 3.5 secondsto lock the keypad.To unlock the keypad, select Unlock, and press * within 1.5 seconds. If Securitykeyguard is set to On, enter the security code if requested.To answer a call when keyguard is on, press the call key. When you end or rejectthe call, the keypad automatically locks.Further features are Automatic keyguard and Security keyguard. See"Phone," p. 59.When the keyguard is on, calls may be possible to the official emergencynumber programmed into your device.Functions without a SIM cardSeveral functions of your device may be used without installing a SIM card (forexample, the data transfer with a compatible PC or another compatible device).Some functions appear dimmed in the menus and cannot be used.Your device23CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 23 May 8, 2007 4:09:52 PM
4. Call functionsMake a callNumber dialing1. Enter the phone number, including the area code.For international calls, press * twice for the international prefix (the +character replaces the international access code), enter the country code,the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key. To adjust the volume in a call, pressthe volume key up or down.3. To end the call or to cancel the call attempt, press the end key.You can search for a name or phone number that you have saved in Contacts.See "Search for a contact," p. 46. Press the call key to call the number.To access the list of dialed numbers, press the call key once in the standby mode.To call the number, select a number or name, and press the call key.Dialing shortcutsAssign a phone number to one of the number keys, 2 to 9. See "Dialingshortcuts," p. 48.Call the number in one of the following ways:Press a number key, then the call key.ORIf Speed dialling is set to On, press and hold a number key until the call begins.Further details are described in Speed dialling. See "Call," p. 58.Call functions24CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 24 May 8, 2007 4:09:52 PM
Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact listof the device.Voice commands are language-dependent. Set the Voice recognitionlanguage before using voice dialing. See "Phone," p. 59.Note:  Using voice tags may be difficult in a noisy environment or duringan emergency, so you should not rely solely upon voice dialing in allcircumstances.1. In the standby mode, press and hold the right selection key or the volumedown key. A short tone sounds, and Speak now is displayed.2. Speak the name of the contact you want to dial clearly. If the voicerecognition is successful, a list with matches is shown. The device plays thevoice command of the first match on the list. If it is not the correct command,scroll to another entry.Using voice commands to carry out a selected device function is similar to voicedialing. See "Voice commands," p. 53.Answer or reject a callTo answer an incoming call, press the call key. To end the call, press the endkey.To reject an incoming call, press the end key. To mute the ringing tone, selectSilence.To answer a waiting call during an active call (network service), press the callkey. The first call is put on hold. To end the active call, press the end key. Youmay also activate the Call waiting function. See "Call," p. 58.Options during a callMany of the options that you can use during a call are network services. Foravailability, contact your service provider.Call functions25CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 25 May 8, 2007 4:09:52 PM
During a call, select Options and from the following options:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,Voice clarity, Loudspeaker or Handset.Network options are Answer or Reject, Hold or Unhold, New call, Add toconference, End call, End all calls, and the following:•Send DTMF —  to send tone strings•Swap —  to switch between the active call and the call on hold•Transfer —  to connect a call on hold to an active call and disconnect yourself•Conference —  to make a conference call•Private call — to have a private discussion in a conference callWarning:  Do not hold the device near your ear when the loudspeakeris in use, because the volume may be extremely loud.5. Write textText modesTo enter text (for example, when writing messages) you can use traditional orpredictive text input.When you write text, press and hold Options to toggle between traditionaltext input, indicated by  , and predictive text input, indicated by  . Notall languages are supported by predictive text input.The character cases are indicated by  ,  , and  . To change the charactercase, press #. To change from the letter to number mode, indicated by  ,press and hold #, and select Number mode. To change from the number tothe letter mode, press and hold #.To set the writing language, select Options > Writing language.Write text26CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 26 May 8, 2007 4:09:52 PM
Traditional text inputPress a number key, 2 to 9, repeatedly until the desired character appears. Theavailable characters depend on the selected writing language.If the next letter you want is located on the same key as the present one, waituntil the cursor appears and enter the letter.To access the most common punctuation marks and special characters,repeatedly press the number key 1 or press * to select a special character.Predictive text inputPredictive text input is based on a built-in dictionary to which you can also addnew words.1. Start writing a word, using the keys 2 to 9. Press each key only once for oneletter.2. When you finish writing the word and it is correct, to confirm it by addinga space, press 0.If the word is not correct, press * repeatedly, and select the word from thelist.If the ? character is displayed after the word, the word you intended to writeis not in the dictionary. To add the word to the dictionary, select Spell. Enterthe word using traditional text input, and select Save. To write compoundwords, enter the first part of the word, and press the scroll key right toconfirm it. Write the last part of the word, and confirm the word.3. Start writing the next word.6. Navigate the menusThe device offers you an extensive range of functions that are grouped intomenus.Navigate the menus27CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 27 May 8, 2007 4:09:52 PM
1. To access the menu, select Menu.2. Scroll through the menu, and select an option (for example, Settings).3. If the selected menu contains further submenus, select one (for example,Call).4. If the selected menu contains further submenus, repeat step 3.5. Select the setting of your choice.6. To return to the previous menu level, select Back.To exit the menu, select Exit.To change the menu view, select Options > Main menu view > List orGrid.To rearrange the menu, scroll to the menu to be moved, and select Options >Organise > Move. Scroll to where you want to move the menu, and selectOK. To save the change, select Done > Yes.7. MessagingYou can read, write, send, and save text, multimedia, e-mail, audio, and flashmessages and postcards. All messages are organized into folders.Text messagesYour device supports the sending of text messages beyond the character limitfor a single message. Longer messages are sent as a series of two or moremessages. Your service provider may charge accordingly. Characters that useaccents or other marks, and characters from some language options, take upmore space, limiting the number of characters that can be sent in a singlemessage.With the short message service (SMS) you can send and receive text messagesand receive messages that can contain pictures (network service).Messaging28CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 28 May 8, 2007 4:09:52 PM
Before you can send any text message, you must save your message centernumber. See "Message settings," p. 42.To check SMS e-mail service availability and to subscribe to the service, contactyour service provider. You can save an e-mail address in Contacts. See "Savedetails," p. 45.Write and send a text message1. Select Menu > Messaging > Create message > Text message.2. Enter one or more phone numbers or e-mail addresses in the To: field. Toretrieve a phone number or e-mail address, select Add.3. For a SMS e-mail, enter a subject in the Subject: field.4. Write your message in the Message: field.An indicator at the top of the display shows the total number of charactersleft and the number of messages needed for sending. For example, 673/2means that there are 673 characters left and that the message will be sentas a series of 2 messages.5. To send the message, select Send. See "Message sending process," p. 31.Read and reply to a text message1. To view a received message, select Show. To view it later, select Exit.2. To read the message later, select Menu > Messaging > Inbox.   isshown if you have unread messages in the inbox.3. To reply to a message, select Reply and the message type.4. Create the reply message.5. To send the message, select Send. See "Message sending process," p. 31.Multimedia messagesOnly devices that have compatible features can receive and display multimediamessages. The appearance of a message may vary depending on the receivingdevice.Messaging29CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 29 May 8, 2007 4:09:52 PM
The wireless network may limit the size of MMS messages. If the inserted pictureexceeds this limit, the device may make it smaller so that it can be sent by MMS.A multimedia message can contain text and objects such as images, sound clips,or video clips.To check availability and to subscribe to the multimedia messaging service(MMS), contact your service provider. See "Message settings," p. 42.Write and send a multimedia message1. Select Menu > Messaging > Create message > Multimedia.2. Create your message.Your device supports multimedia messages that contain several pages(slides). A message can contain a calendar note and a business card asattachments. A slide can contain text, one image, and one sound clip; or textand a video clip. To insert a slide in the message, select New; or selectOptions > Insert > Slide. To insert a file in the message, select Insert.3. To view the message before sending it, select Options > Preview.4. To send the message, select Send.5. Enter one or more phone numbers or e-mail addresses in the To: field. Toretrieve a phone number or e-mail address, select Add.6. For an SMS e-mail, enter a subject in the Subject: field.7. To send the message, select Send. See "Message sending process," p. 31.Write and send a multimedia plus messageAny content can be added to the multimedia plus message. Such content mightbe images, video clips, sound clips, business cards, calendar notes, themes,streaming links, or even unsupported files (for example, files received with ane-mail).1. Select Menu > Messaging > Create message > Multimedia plus.2. Enter one or more phone numbers or e-mail addresses in the To: field. Toretrieve a phone number or e-mail address, select Add.Messaging30CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 30 May 8, 2007 4:09:52 PM
3. Enter a subject and write your message.4. To insert a file in the message, select Insert or Options > Insert and thefile type.5. To view the message before sending it, select Options > Preview.6. To send the message, select Send. See "Message sending process," p. 31.Read and reply to a multimedia messageImportant:  Exercise caution when opening messages. E-mailmessages or multimedia message objects may contain malicioussoftware or otherwise be harmful to your device or PC.1. To view the received message, select Show. To view it later, select Exit.2. To view the whole message if the received message contains a presentation,select Play. To view the files in the presentation or the attachments, selectOptions > Objects or Attachments.3. To reply to the message, select Options > Reply and the message type.4. Create the reply message.5. To send the message, select Send. See "Message sending process," p. 31.Message sending processTo send the message, select Send. The phone saves the message in theOutbox folder, and the sending starts.Note:  Your device may indicate that your message was sent to themessage center number programmed into your device. Your device maynot indicate whether the message is received at the intendeddestination. For more details about messaging services, contact yourservice provider.If an interruption occurs while the message is being sent, the phone tries toresend the message a few times. If these attempts fail, the message remainsin the Outbox folder. To cancel the sending of the messages in the Outboxfolder, scroll to the desired message, and select Options > Cancel sending.Messaging31CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 31 May 8, 2007 4:09:52 PM
PostcardsWith the postcard messaging service (network service), create and sendpostcards that may contain an image and a greeting text. The postcard is sentto the service provider using multimedia messaging. The service provider printsthe postcard and sends it to the postal address given with the message. MMSmust be activated before this service can be used.Before you can use the postcard service, you must subscribe to the service. Tocheck the availability and costs and to subscribe to the service, contact yourservice provider.To send a postcard, select Menu > Messaging > Create message >Postcard. Fill in the address; mandatory editor fields are marked by a *. Scrollto the image field, select Insert and an image from the gallery, or Newimage to insert a recent image; then write your greeting text. To send themessage, select Send.Flash messagesFlash messages are text messages that are instantly displayed upon reception.Flash messages are not automatically saved.Write a flash messageSelect Menu > Messaging > Create message > Flash message. Enter therecipient’s phone number and write your message. The maximum length of aflash message is 70 characters. To insert a blinking text into the message, selectOptions > Insert blink char. to set a marker. The text after the marker blinks.To end the blinking text range, insert a second marker.Read and reply to a flash messageA received flash message is indicated with Message: and a few words from thebeginning of the message.To read the message, select Read.Messaging32CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 32 May 8, 2007 4:09:52 PM
To extract numbers and addresses from the current message, select Options >Use detail.To save the message, select Save and the folder in which you want to save it.Nokia Xpress audio messagingYou can use the MMS to create and send an audio message in a convenient way.MMS must be activated before you can use audio messages.Create a message1. Select Menu > Messaging > Create message > Audio message. Thevoice recorder opens. See "Voice recorder," p. 68.2. Speak your message.3. Enter one or more phone numbers in the To: field, or select Add to retrievea number.4. To send the message, select Send.Listen to a messageTo open a received audio message, select Play.If more than one message is received, select Show > Play.To listen to the message later, select Exit.Memory fullWhen you receive a message, and the memory for the messages is full, Memoryfull. Unable to receive msgs. is displayed.To delete old messages, select OK > Yes and the folder. Scroll to the desiredmessage, and select Delete.To delete more messages, select Mark. Mark all the messages you want todelete, and select Options > Delete marked.Messaging33CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 33 May 8, 2007 4:09:52 PM
FoldersThe device saves received messages in the Inbox folder. Messages that havenot yet been sent are saved in the Outbox folder.To set the device to save the sent messages in the Sent items folder, selectMenu > Messaging > Message settings > General settings > Save sentmessages.To edit and send messages that you have written and saved in the drafts folder,select Menu > Messaging > Drafts.You can move messages to the Saved items folder. To organize your Saveditems subfolders, select Menu > Messaging > Saved items.To add a folder, select Options > Add folder.To delete or rename a folder, scroll to the desired folder, and select Options >Delete folder or Rename folder.To create a new template, save a message as a template, or access the templatelist, and select Menu > Messaging > Saved items > Templates.E-mail applicationThe e-mail application uses a packet data connection (network service) to allowyou to access your e-mail account. This e-mail application is different from theSMS e-mail function. To use the e-mail function on your device, you need acompatible e-mail system.You can write, send, and read e-mail with your device. Your device supportsPOP3 and IMAP4 e-mail servers. This application does not support keypad tones.Before you can send and retrieve any e-mail messages, you must obtain a newe-mail account or use your current account. To check the availability of your e-mail account, contact your e-mail service provider.Check your e-mail settings with your e-mail service provider. You may receivethe e-mail configuration settings as a configuration message. See"Configuration setting service," p. 12.Messaging34CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 34 May 8, 2007 4:09:52 PM
To activate the e-mail settings, select Menu > Messaging > Messagesettings > E-mail messages. See "E-mail messages," p. 44.Setting wizardThe setting wizard starts automatically if no e-mail settings are defined in thephone.To enter the settings manually, select Menu > Messaging > E-mail >Options > Manage accounts > Options > New. The options for Manageaccounts allow you to add, delete, and change the e-mail settings. Make surethat you have defined the correct preferred access point for the operator. See"Configuration," p. 60.The e-mail application requires an internet access point without a proxy. WAPaccess points normally include a proxy and do not work with the e-mailapplication.Write and send an e-mailYou can write your e-mail message before connecting to the e-mail service; orconnect to the service first, then write and send your e-mail.1. Select Menu > E-mail > Write new e-mail.2. If more than one e-mail account is defined, select the account from whichyou want to send the e-mail.3. Enter the recipient’s e-mail address, write the subject, and enter the e-mailmessage. To attach a file from Gallery, select Options > Attach file.4. To send the e-mail message, select Send > Send now.To save the e-mail in the Outbox folder to be sent later, select Send > Sendlater.To edit or continue writing your e-mail later, select Options > Save asdraft. The e-mail is saved in Outboxes > Drafts.To send the e-mail later, select Menu > Messaging > E-mail > Options >Send now or Send/check e-mail.Messaging35CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 35 May 8, 2007 4:09:52 PM
Download e-mailTo download e-mail messages that have been sent to your e-mail account,select Menu > Messaging > E-mail > Check new e-mail. If more than onee-mail account is defined, select the account from which you want to downloadthe e-mail. The e-mail application only downloads e-mail headers at first. SelectBack > Inboxes, the account name, the new message, and Retrieve todownload the complete e-mail message.To download new e-mail messages and to send e-mail that has been saved inthe Outbox folder, select Options > Send/check e-mail.Read and reply to e-mailImportant:  Exercise caution when opening messages. E-mailmessages or multimedia message objects may contain malicioussoftware or otherwise be harmful to your device or PC.1. Select Menu > Messaging > E-mail > Inboxes, the account name, andthe desired message.2. To reply to an e-mail, select Reply > Original text or Empty message. Toreply to many, select Options > Reply to all. Confirm or edit the e-mailaddress and subject; then write your reply.3. To send the message, select Send > Send now.E-mail foldersYour phone saves e-mail that you have downloaded from your e-mail accountin Inboxes. Inboxes contains the following folders: “Account name” forincoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 forsorting e-mail, Junk where all spam e-mail is stored, Drafts for savingunfinished e-mail, Outbox for saving e-mail that has not been sent, and Sentitems for saving e-mail that has been sent.To manage the folders and their e-mail content, select Options to view theavailable options of each folder.Messaging36CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 36 May 8, 2007 4:09:52 PM
Spam filterThe spam filter allows you to put specific senders on a black or white list. Blacklist sender messages are filtered to Junk. Unknown and white list sendermessages are downloaded into the account inbox.To activate and define a spam filter, select Options > Spam filter >Settings in the main e-mail idle screen.To blacklist a sender, select the e-mail message in the Inboxes folder andOptions > Blacklist sender.Instant messagesNote:  Depending on your IM service, you may not have access to all ofthe features described in this guide.With instant messaging (IM) (network service) you can send short, simple textmessages to online users. You have to subscribe to a service and register withthe IM service you want to use. For more information about signing up for IMservices, contact your service provider.To set the required settings for the IM service, use the option Connect.settings. See "Access," p. 37.The icons and texts on the display may vary, depending on the IM service.AccessSelect Menu > Messaging > Instant messages. Instant messages may bereplaced by another term depending on the service provider. If more than oneset of connection settings for IM service is available, select the one you want.Select from the following options:•Login — to connect to the IM service. To set the phone to automaticallyconnect to the IM service when you switch on the phone, in the login session,select Automatic login: > On.•Saved convers. — to view, erase, or rename the conversations that yousaved during an IM sessionMessaging37CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 37 May 8, 2007 4:09:52 PM
•Connect. settings — to edit the settings needed for messaging andpresence connectionConnectTo connect to the service, access the instant messages menu, select the IMservice, if needed, and Login.To disconnect from the IM service, select Options > Logout.SessionsWhen connected to the service, your status, as seen by others, is shown in astatus line: Status: Online, My status: Busy, or Status: App. off. To changeyour own status, select Change.Below the status line there are three folders containing your contacts that showtheir status: Conversations, Online (), and Offline (). To expand the folder,scroll to it, and select Expand (or scroll right).To collapse the folder, select Collapse (or scroll left).•Conversations — shows the list of new and read instant messages orinvitations to IM during the active IM session:  indicates a new group message  indicates a read group message  indicates a new instant message  indicates a read instant message  indicates an invitationThe icons and texts on the display depends on the IM service.•Online () — shows the number of contacts that are online•Offline () — shows the number of contacts that are offlineTo start a conversation, expand the online or the offline folder, scroll to thecontact with whom you want to chat, and select Chat. To answer anMessaging38CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 38 May 8, 2007 4:09:52 PM
invitation or reply to a message, expand the Conversations folder, scroll tothe contact to whom you want to chat, and select Open.•Groups > Public groups — List of bookmarks to public groups provided bythe service provider (not visible if groups are not supported by the network).To start an IM session with a group, scroll to a group, and select Join. Enterthe screen name that you want to use as your nickname in the conversation.When you have successfully joined the group conversation, you can start agroup conversation. You can create a private group. See "Groups," p. 40.•Search > Users or Groups  — to search for other IM users or public groupson the network by phone number, screen name, e-mail address, or name. Ifyou select Groups, you can search for a group by a member in the group,group name, topic, or ID.•Options > Chat or Join group — to start the conversation when you havefound the user or the group that you wantAccept or reject an invitationIf you receive a new invitation, to read it, select Read. If more than oneinvitation is received, select an invitation and Open. To join the private groupconversation, select Accept, and enter the screen name you want to use as yournickname. To reject or delete the invitation, select Options > Reject orDelete.Read an instant messageIf you receive a new message that is not a message associated with an activeconversation, New instant message is displayed. To read it, select Read. Ifmore than one message is received, select a message and Open.New messages received during an active conversation are held in Instantmessages > Conversations. If you receive a message from someone who isnot in IM contacts, the sender ID is displayed. To save a new contact that is notin the phone memory, select Options > Save contact.Messaging39CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 39 May 8, 2007 4:09:52 PM
Participate in a conversationTo join or start an IM session, write your message, and select Send.If you receive a new message during a conversation from a person who is nottaking part in the current conversation,  is displayed, and the phone soundsan alert tone. Write your message, and select Send. Your message is displayed,and the reply message is displayed below your message.Add IM contactsWhen connected to the IM service, in the IM main menu, select Options > Addcontact > By mobile number, Enter ID manually, Search from serv., orCopy from server (depending on the service provider). To start a conversation,scroll to a contact, and select Chat.Block or unblock messagesWhen you are in a conversation and want to block messages, select Options >Block contact.To block messages from a specific contact in your contacts list, scroll to thecontact in Conversations, and select Options > Block contact > OK.To unblock a contact, in the IM main menu, select Options > Blocked list.Scroll to the contact you want to unblock, and select Unblock > OK.GroupsYou can use the public groups provided by the service provider or create yourown private groups for an IM conversation.You can bookmark public groups that your service provider may maintain.Connect to the IM service, and select Groups > Public groups. Select a groupand Join. If you are not in the group, enter your screen name as your nicknamefor the group.To delete a group from your list, select Options > Delete group.To search for a group, select Groups > Public groups > Search groups.Messaging40CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 40 May 8, 2007 4:09:52 PM
To create a private group, connect to the IM service, and, from the main menu,select Options > Create group. Enter the name for the group and the screenname that you want to use as your nickname. Mark the private group membersin the contacts list, and write an invitation.Voice messagesThe voice mailbox is a network service to which you may need to subscribe. Formore information, contact your service provider.To call your voice mailbox, select Menu > Messaging > Voice messages >Listen to voice messages.To enter, search for, or edit your voice mailbox number, select Voice mailboxnumber.If supported by the network,   indicates new voice messages. To call yourvoice mailbox number, select Listen.Info messagesYou can receive messages on various topics from your service provider (networkservice). For more information, contact your service provider.Select Menu > Messaging > Info messages and from the available options.Service commandsService commands allow you to write and send service requests (USSDcommands) to your service provider, such as activation commands for networkservices.To write and send the service request, select Menu > Messaging > Servicecommands. For details, contact your service provider.Delete messagesDelete a single message, all messages, or a folder.Messaging41CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 41 May 8, 2007 4:09:52 PM
To delete messages, select Menu > Messaging > Delete messages > Bymessage to delete a single message, By folder to delete all messages from afolder, or All messages.SIM messagesSIM messages are specific text messages that are saved to your SIM card.You can copy or move those messages from the SIM to the phone memory, butnot vice versa.To read SIM messages, select Menu > Messaging > Options > SIMmessages.Message settingsGeneral settingsGeneral settings are common for text and multimedia messages.Select Menu > Messaging > Message settings > General settings andfrom the following options:•Save sent messages — Select Yes to save the sent messages in the Sentitems folder.•Overwriting in Sent items — Select Allowed to overwrite old sentmessages with the new ones when the message memory is full. This settingis shown only if you select Save sent messages > Yes.•Font size — Select the font size used in messages.•Graphical smileys — Select Yes to set the device to replace character-basedsmileys with graphical ones.Text messagesThe text message settings affect the sending, receiving, and viewing of text andSMS e-mail messages.Select Menu > Messaging > Message settings > Text messages and fromthe following options:Messaging42CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 42 May 8, 2007 4:09:52 PM
•Delivery reports — Select Yes to ask the network to send delivery reportsabout your messages (network service).•Message centres — Select Add centre to set the phone number and nameof the message center that is required for sending text messages. You receivethis number from your service provider.•Message centre in use —  to select the message center in use.•E-mail message centres — Select Add centre to set the phone numbersand name of the e-mail center for sending SMS e-mail.•E-mail centre in use — to select the SMS e-mail message center in use•Message validity — to select the length of time for which the networkattempts to deliver your message•Messages sent via — to select the format of the messages to be sent:Text, Paging, or Fax (network service)•Use packet data — Select Yes to set GPRS as the preferred SMS bearer.•Character support — Select Full to select all characters in the messages tobe sent as viewed. If you select Reduced, characters with accents and othermarks may be converted to other characters.•Reply via same centre — Select Yes to allow the recipient of your messageto send you a reply using your message center (network service).Multimedia messagesThe message settings affect the sending, receiving, and viewing of multimediamessages.You may receive the configuration settings for multimedia messaging as aconfiguration message. See "Configuration setting service," p. 12. You can alsoenter the settings manually. See "Configuration," p. 60.Select Menu > Messaging > Message settings > Multimedia msgs. andfrom the following options:•Delivery reports — Select Yes to ask the network to send delivery reportsabout your messages (network service).•Image size (multimedia plus) — to set the image size in multimedia plusmessages•Image size (multimedia) — to set the image size in multimedia messagesMessaging43CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 43 May 8, 2007 4:09:52 PM
•Default slide timing — to define the default time between slides inmultimedia messages•Allow multimedia reception — Select Yes or No to receive or block themultimedia message. If you select In home network, you cannot receivemultimedia messages when outside your home network. The default settingof the multimedia message service is generally In home network. Theavailability of this menu depends on your phone.•Incoming multi- media messages — to allow the reception of multimediamessages automatically, manually after being prompted, or to reject thereception. This setting is not shown if Allow multimedia reception is setto No.•Allow adverts — to receive or reject advertisements. This setting is notshown if Allow multimedia reception is set to No, or Incoming multi-media messages is set to Reject.•Configuration settings — Select Configuration to display theconfigurations that support multimedia messaging. Select a serviceprovider, Default, or Personal config. for multimedia messaging. SelectAccount and an MMS account contained in the active configuration settings.E-mail messagesThe settings affect sending, receiving, and viewing e-mail. You may receive thesettings as a configuration message. See "Configuration settingservice," p. 12. You can also manually enter the settings. See"Configuration," p. 60.Select Menu > Messaging > Message settings > E-mail messages todisplay the options.8. ContactsYou can save names and phone numbers (contacts) in the device memory andin the SIM card memory.Contacts44CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 44 May 8, 2007 4:09:52 PM
The device memory can save contacts with additional details, such as variousphone numbers and text items. You can also save an image for a limited numberof contacts.The SIM card memory can save names with one phone number attached tothem. The contacts saved in the SIM card memory are indicated by  .Save names and phone numbersNames and numbers are saved in the used memory.To save a name and phone number, select Menu > Contacts > Names >Options > Add new contact.Save detailsIn the device memory you can save different types of phone numbers, a toneor a video clip, and short text items for a contact.The first number you save is automatically set as the default number and isindicated with a frame around the number type indicator (for example,  ).When you select a name from contacts (for example, to make a call), the defaultnumber is used unless you select another number.Make sure that the memory in use is Phone or Phone and SIM. See"Settings," p. 45.Search for the contact to add a detail, and select Details > Options > Adddetail.Select from the available options.SettingsThese settings define where the contact information is stored, how it isdisplayed, and how much memory remains.Select Menu > Contacts > Settings and from the following options:Contacts45CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 45 May 8, 2007 4:09:52 PM
•Memory in use  — to select the SIM card or phone memory for your contacts.Select Phone and SIM to recall names and numbers from both memories.In that case, when you save names and numbers, they are saved in the phonememory.•Contacts view  — to select how the names and numbers in Contacts aredisplayed•Name display —  to select whether the contact’s first or last name isdisplayed first•Font size  — to set the font size for the list of contacts•Memory status —  to view the free and used memory capacityGroupsSelect Menu > Contacts > Groups to arrange the names and phone numberssaved in the memory into caller groups with different ringing tones and groupimages.Search for a contactSelect Menu > Contacts > Names and scroll through the list of contacts, orenter the first characters of the name to search.Copy or move contactsTo copy or move a contact between the SIM card memory and the phonememory, select Menu > Contacts > Names. Select the contact to copy ormove and Options > Copy contact or Move contact.To copy or move several contacts, select the first contact to copy or move andOptions > Mark. Mark the other contacts, and select Options > Copymarked or Move marked.To copy or move all contacts between the SIM card memory and the phonememory, select Menu > Contacts > Copy contacts or Move contacts.Contacts46CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 46 May 8, 2007 4:09:52 PM
The SIM card memory can save names with one phone number attached tothem.Edit contact detailsSearch for the contact, and select Details.To edit a name, number, or text item or to change the image, select Options >Edit.To change the number type, scroll to the desired number, and select Options >Change type. To set the selected number as the default number, selectOptions > Set as default.Delete contactsTo delete a contact, search for the desired contact, and select Options > Deletecontact.To delete all the contacts and the details attached to them from the phone orSIM card memory, select Menu > Contacts > Delete all contacts > Fromphone mem. or From SIM card.To delete a number, text item, or an image attached to the contact, search forthe contact, and select Details. Scroll to the desired detail, and selectOptions > Delete and from the available options.Synchronize allSynchronize your calendar, contacts data, and notes with a remote internetserver (network service). See "Synchronize from a server," p. 57.Business cardsYou can send and receive a person’s contact information from a compatibledevice that supports the vCard standard as a business card.Contacts47CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 47 May 8, 2007 4:09:52 PM
To send a business card, search for the contact, and select Details > Options >Send bus. card.When you receive a business card, select Show > Save to save the businesscard in the phone memory. To discard the business card, select Exit > Yes.Dialing shortcutsYour device can dial a phone number with one keypress. The number keys, 2to 9, can have a phone number assigned to them. To assign a phone numberto a number key, select Menu > Contacts > Speed dials, and scroll to thenumber to assign as the shortcut for Speed dialling.Select Assign, or if a number has already been assigned to the key, selectOptions > Change.Select Search and the contact to assign the shortcut. If Speed dialling is off,the phone asks whether you want to activate it.To make a call using the shortcuts, press and hold the corresponding key. See"Dialing shortcuts," p. 24.Info, service, and my numbersSelect Menu > Contacts and from one of these submenus:•Info numbers —  to call the information numbers of your service providerif the numbers are included on your SIM card (network service)•Service numbers  — to call the service numbers of your service provider, ifthe numbers are included on your SIM card (network service)•My numbers —  to view the phone numbers assigned to your SIM card, ifthe numbers are included on your SIM card.Contacts48CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 48 May 8, 2007 4:09:52 PM
9. Call logThe device registers your missed, received, and dialed calls if the networksupports it and the device is switched on and within the network service area.To view the information on your calls, select Menu > Log > Missed calls,Received calls, or Dialled numbers.To view your recent missed and received calls and the dialed numberschronologically, select Call log. T o view  the  contacts t o whom  you most r ecentlysent messages, select Message recipients.To view the approximate information on your recent communications, selectMenu > Log > Call duration, Packet data counter, or Packet data conn.timer.To view how many text and multimedia messages you have sent and received,select Menu > Log > Message log.Note:  The actual invoice for calls and services from your service providermay vary, depending on network features, rounding off for billing,taxes, and so forth.Note:  Some timers, including the life timer, may be reset during serviceor software upgrades.10. PositioningThe network may send you a position request (network service). Contact yourservice provider to subscribe and to agree upon the delivery of positioninginformation.To accept or reject the position request, select Accept or Reject. If you miss therequest, the phone automatically accepts or rejects it according to what youhave agreed with your network operator or service provider. The phoneCall log49CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 49 May 8, 2007 4:09:52 PM
displays 1 missed position request. To view the missed positioning request,select Show.To view the information on the 10 most recent privacy notifications andrequests or to delete them, select Menu > Log > Positioning > Positionlog > Open folder or Delete all.11. SettingsProfilesYour phone has various setting groups called profiles, for which you cancustomize the phone tones for different events and environments.Select Menu > Settings > Profiles, the desired profile, and from the followingoptions:•Activate — to activate the selected profile•Personalise — to personalize the profile. Select the setting you want tochange, and make the changes.•Timed — to set the profile to be active until a certain time (up to 24 hours)and set the end time. When the time set for the profile expires, the previousprofile that was not timed becomes active.ThemesA theme contains elements for personalizing your device.Select Menu > Settings > Themes and from the following options:•Select theme — to set a theme. A list of folders in Gallery opens. Open theThemes folder, and select a theme.•Theme downloads — to open a list of links to download more themesSettings50CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 50 May 8, 2007 4:09:52 PM
TonesYou can change the tone settings of the selected active profile.Select Menu > Settings > Tones. You can find the same settings in theProfiles menu. See "Profiles," p. 50.To set the phone to only ring for calls from phone numbers that belong to aselected caller group, select Alert for.Select Options > Save to save the settings or Cancel to leave the settingsunchanged.If you select the highest ringing tone level, the ringing tone reaches its highestlevel after a few seconds.DisplaySelect Menu > Settings > Display and from the available options:•Wallpaper — to add the background image in the standby mode•Wallpaper — to add the background image in the Home screen•Active standby — to switch the active standby mode on or off and toorganize and personalize the active standby mode•Standby mode font colour — to select the color for the texts in the standbymode•Navigation key icons — to display the icons of the current scroll keyshortcuts in the standby mode when active standby is off•Screen saver — to set your device to display a screen saver. To downloadmore screen savers, select Graphic downloads. To set the time after whichthe screen saver is activated, select Time-out.•Power saver — to save some battery power. The date and a digital clockare displayed when no function of the device is used for a certain time.•Sleep mode — to save some battery power•Font size — to set the font size for messaging, contacts, and web pages•Operator logo — to set your device to display or hide the operator logo•Cell info display — to display the cell identity, if available from the networkSettings51CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 51 May 8, 2007 4:09:52 PM
Time and dateTo change the clock type, time, time zone, and date settings, select Menu >Settings > Time and date > Time, Date, or Auto-update of date & time(network service).When traveling to a different time zone, select Menu > Settings > Time anddate > Time > Time zone and the time zone of your location in terms of thetime difference with respect to Greenwich mean time (GMT) or coordinateduniversal time (UTC). The time and date are set according to the time zone andenable your device to display the correct sending time of received text ormultimedia messages.My shortcutsWith personal shortcuts you get quick access to often used functions of thedevice.Left selection keyTo select a function from the list, select Menu > Settings > My shortcuts >Left selection key.If the left selection key is Go to to activate a function, in the standby mode,select Go to > Options and from the following options:•Select options — to add a function to the shortcut list or to remove one•Organise — to rearrange the functions on your personal shortcut listRight selection keyTo select a function from the list, select Menu > Settings > My shortcuts >Right selection key.Settings52CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 52 May 8, 2007 4:09:52 PM
Navigation keyTo assign other device functions from a predefined list to the navigation key(scroll key), select Menu > Settings > My shortcuts > Navigation key.Voice commandsCall contacts and carry out device functions by speaking a voice command.Voice commands are language-dependent, and you must set the Voicerecognition language before using voice commands. See "Phone," p. 59.To select the device function to activate with a voice command, select Menu >Settings > My shortcuts > Voice commands and a folder. Scroll to afunction.   indicates that the voice tag is activated. To activate the voice tag,select Add. To play the activated voice command, select Play. See "Enhancedvoice dialing," p. 25.To manage the voice commands, scroll to a device function, and selectOptions and from the following:•Edit or Remove — to change or deactivate the voice command of theselected function•Add all or Remove all — to activate or deactivate voice commands to allfunctions in the voice commands listInfraredYou can set up the phone to send and receive data through its infrared (IR) portto or from a IRDA compatible phone or data device.Do not point the infrared (IR) beam at anyone's eye or allow it to interfere withother IR devices. This device is a Class 1 laser product.When sending or receiving data, ensure that the IR ports of the sending andreceiving devices are pointing at each other and that there are no obstructionsbetween the devices.To activate or deactivate the IR port of your phone, select Menu > Settings >Connectivity > Infrared.Settings53CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 53 May 8, 2007 4:09:52 PM
If the data transfer is not started within 2 minutes after the activation of theIR port, the connection is cancelled and must be started again.IR connection indicator•When   is shown continuously, the IR connection is activated, and yourphone is ready to send or receive data through its IR port.•When   blinks, your phone is trying to connect to the other device, or aconnection has been lost.BluetoothBluetooth wireless technologyBluetooth technology allows you to connect the device to a compatibleBluetooth device within 10 meters (32 feet). Since devices using Bluetoothtechnology communicate using radio waves, your device and the other devicesdo not need to be in direct line-of-sight, although the connection can be subjectto interference from obstructions such as walls or from other electronic devices.This device is compliant with Bluetooth Specification 2.0 + EDR supporting thefollowing profiles: generic access, network access, generic object exchange,advanced audio distribution, audio video remote control, hands-free, headset,object push, file transfer, dial-up networking, SIM access, and serial port. Toensure interoperability between other devices supporting Bluetoothtechnology, use Nokia approved enhancements for this model. Check with themanufacturers of other devices to determine their compatibility with thisdevice.There may be restrictions on using Bluetooth technology in some locations.Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in thebackground while using other features, increase the demand on battery powerand reduce the battery life.Settings54CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 54 May 8, 2007 4:09:52 PM
Set up a Bluetooth connectionSelect Menu > Settings > Connectivity > Bluetooth and from the followingoptions:•Bluetooth —  Select On to activate the Bluetooth function.   indicates thatBluetooth is activated.•My phone's visibility — to define how your device is shown to otherBluetooth devices•Search for audio enhancements — to search for compatible Bluetoothaudio devices. Select the device that you want to connect to the phone.•Active devices — to check which Bluetooth connection is currently active•Paired devices — to search for any Bluetooth device in range. Select Newto list any Bluetooth device in range. Select a device and Pair. Enter an agreedBluetooth passcode of the device (up to 16 characters) to pair the device toyour device. You must only give this passcode when you connect to the devicefor the first time. Your device connects to the other device, and you can startdata transfer.•My phone's name — to set the device name for Bluetooth connectionsIf you are concerned about security, turn off the Bluetooth function, or set Myphone's visibility to Hidden. Always accept only Bluetooth communicationfrom others whom you trust.Packet dataGeneral packet radio service (GPRS) is a network service that allows mobiledevices to send and receive data over an internet protocol (IP)-based network.To define how to use the service, select Menu > Settings > Connectivity >Packet data > Packet data connection and from the following options:•When needed — to set the packet data connection to established when anapplication needs it. The connection will be closed when the application isterminated.•Always online — to set the device to automatically connect to a packet datanetwork when you switch the device on.Settings55CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 55 May 8, 2007 4:09:52 PM
You can connect the device using Bluetooth wireless technology or USB datacable connection to a compatible PC and use the device as a modem to enableGPRS connectivity from the PC.To define the settings for connections from your PC, select Menu > Settings >Connectivity > Packet data > Packet data settings > Active accesspoint, and activate the access point you want to use. Select Edit active accesspoint > Alias for access point, enter a name to change the access pointsettings, and select OK. Select Packet data access point, enter the access pointname (APN) to establish a connection to a network, and select OK.Establish an internet connection by using your phone as a modem. See "NokiaPC Suite," p. 87. If you have set the settings both on your PC and on your device,the PC settings are used.Data transferSynchronize your calendar, contacts data, and notes with another compatibledevice (for example, a mobile device), a compatible PC, or a remote internetserver (network service).Your device allows data transfer with a compatible PC or another compatibledevice when using the device without a SIM card.Transfer contact listTo copy or synchronize data from your device, the name of the device and thesettings must be in the list of transfer contacts. If you receive data from anotherdevice (for example, a compatible mobile device), the corresponding transfercontact is automatically added to the list, using the contact data from the otherdevice. Server sync and PC sync are the original items in the list.To add a new transfer contact to the list (for example, a mobile device), selectMenu > Settings > Connectivity > Data transfer > Options > Addcontact > Phone sync or Phone copy, and enter the settings according tothe transfer type.Settings56CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 56 May 8, 2007 4:09:52 PM
To edit the copy and synchronize settings, select a contact from the transfercontact list and Options > Edit.To delete a transfer contact, select it from the transfer contact list andOptions > Delete.Data transfer with a compatible deviceFor synchronization use Bluetooth wireless technology or a cable connection.The other device must be activated for receiving data.To start data transfer, select Menu > Settings > Connectivity > Datatransfer and the transfer contact from the list other than Server sync or PCsync.According to the settings, the selected data is copied or synchronized.Synchronize from a PCTo synchronize data from calendar, notes, and contacts, install the Nokia PCSuite software of your device on a compatible PC. Use Bluetooth wirelesstechnology or a USB data cable to connect your device with the PC and start thesynchronization from the PC.Synchronize from a serverTo use a remote internet server, subscribe to a synchronization service. Formore information and the settings required for this service, contact your serviceprovider. You may receive the settings as a configuration message. See"Configuration setting service," p. 12.To start the synchronization from your device, select Menu > Settings >Connectivity > Data transfer > Server sync.Synchronizing for the first time or after an interrupted synchronization maytake up to 30 minutes to complete.Settings57CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 57 May 8, 2007 4:09:52 PM
USB data cableYou can use the USB data cable to transfer data between the device and acompatible PC or a printer supporting PictBridge. You can also use the USB datacable with Nokia PC Suite.To activate the device for data transfer or image printing, connect the datacable. Confirm "USB data cable connected. Select mode." and select from thefollowing options:•Nokia mode — to use the cable for PC Suite•Printing & media — to use the device with a PictBridge compatible printeror with your compatible PC•Data storage — to connect to a PC that does not have Nokia software anduse the device as a data storage deviceTo change the USB mode, select Menu > Settings > Connectivity > USBdata cable and the desired USB mode.CallSelect Menu > Settings > Call and from the following options:•Call divert — to forward your incoming calls (network service). You may notbe able to forward your calls if some call restriction functions are active. See"Security," p. 61.•Voice clarity — Select Active to enhance speech intelligibility especially innoisy environments.•Anykey answer — Select On to answer an incoming call by briefly pressingany key, except the power key, the left and right selection keys, or the endkey.•Automatic redial — Select On to make a maximum of 10 attempts toconnect the call after an unsuccessful call attempt.•Speed dialling — Select On to dial the names and phone numbers assignedto the number keys 2 to 9 by pressing and holding the corresponding numberkey.Settings58CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 58 May 8, 2007 4:09:52 PM
•Call waiting — Select Activate to have the network notify you of anincoming call while you have a call in progress (network service). See"Answer or reject a call," p. 25.•Summary after call — Select On to briefly display the approximate durationafter each call.•Send my caller ID — Select Yes to show your phone number to the personyou are calling (network service). To use the setting agreed upon with yourservice provider, select Set by network.•Line for outgoing calls — to select the phone line 1 or 2 for making calls ifsupported by your SIM card (network service)PhoneSelect Menu > Settings > Phone and from the following options:•Language settings — To set the display language of your device, selectPhone language. Automatic selects the language according to theinformation on the SIM card. To select the USIM card language, select SIMlanguage. To set a language for the voice playback, select Voicerecognition language. See "Enhanced voice dialing," p. 25.•Security keyguard — To set the device to ask for the security code whenyou unlock the keyguard. Enter the security code, and select On.•Automatic keyguard — to lock the keypad automatically after a preset timedelay when the device is in the standby mode and no function of the devicehas been used. Select On, and set the time.•Welcome note — to write the note that is shown when the device isswitched on•Flight query — The device asks every time when it is switched on whetheryou want to use the flight profile. With the flight profile, all radio connectionsare switched off. The flight profile should be used in areas sensitive to radioemissions.•Phone updates — to receive software updates from your service provider(network service). This option may not be available, depending on yourdevice. See "Software updates over the air," p. 62.Settings59CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 59 May 8, 2007 4:09:52 PM
•Operator selection — Select Automatic to set the device to automaticallyselect one of the cellular networks available in your area. With Manual youcan select a network that has a roaming agreement with your serviceprovider.•Confirm SIM service actions — See "SIM services," p. 86.•Help text activation — to select whether the device shows help texts•Start-up tone — The device plays a tone when it is switched on.EnhancementsThis menu or the following options are shown only if the device is or has beenconnected to a compatible mobile enhancement.Select Menu > Settings > Enhancements. Select an enhancement, anddepending on the enhancement, from the following options:•Default profile — to select the profile that you want to be automaticallyactivated when you connect to the selected enhancement•Automatic answer — to set the device to answer an incoming callautomatically after 5 seconds. If Incom. call alert: is set to Beep once orOff, automatic answer is off.•Lights — to set the lights permanently On. Select Automatic to set the lightson for 15 seconds after a keypress.•Text phone — Select Use text phone > Yes to use this setting instead ofheadset or loopset settings.ConfigurationYou can configure your device with settings that are required for certainservices. Your service provider may also send you these settings. See"Configuration setting service," p. 12.Select Menu > Settings > Configuration and from the following options:•Default configu- ration settings — to view the service providers saved inthe device. To set the configuration settings of the service provider as defaultsettings, select Options > Set as default.Settings60CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 60 May 8, 2007 4:09:52 PM
•Activate default in all applications — to activate the default configurationsettings for supported applications•Preferred access point — to view the saved access points. Scroll to an accesspoint, and select Options > Details to view the name of the serviceprovider, data bearer, and packet data access point or GSM dial-up number.•Connect to service provider support — to download the configurationsettings from your service provider•Device manager settings — to allow or prevent the device from receivingsoftware updates. This option may not be available, depending on yourdevice. See "Software updates over the air," p. 62.•Personal configu- ration settings — to manually add new personalaccounts for various services and to activate or delete them. To add a newpersonal account if you have not added any, select Add new; otherwise,select Options > Add new. Select the service type, and select and entereach of the required parameters. The parameters differ according to theselected service type. To delete or activate a personal account, scroll to it,and select Options > Delete or Activate.SecurityWhen security features that restrict calls are in use (such as call barring, closeduser group, and fixed dialing), calls may be possible to the official emergencynumber programmed into your device.Select Menu > Settings > Security and from the following options:•PIN code request and UPIN code request — to set the device to ask foryour PIN or UPIN code every time the device is switched on. Some SIM cardsdo not allow the code request to be turned off.•PIN2 code request — to select whether the PIN2 code is required whenusing a specific device feature which is protected by the PIN2 code. SomeSIM cards do not allow the code request to be turned off.•Call barring service — to restrict incoming calls to and outgoing calls fromyour device (network service). A restriction password is required.Settings61CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 61 May 8, 2007 4:09:52 PM
•Fixed dialling — to restrict your outgoing calls to selected phone numbersif this function is supported by your SIM card. When the fixed dialing is on,GPRS connections are not possible except while sending text messages overa GPRS connection. In this case, the recipient’s phone number and themessage center number must be included in the fixed dialing list.•Closed user group — to specify a group of people whom you can call andwho can call you (network service)•Security level — Select Phone to set the device to ask for the security codewhenever a new SIM card is inserted into the device. If you select Memory,the device asks for the security code when the SIM card memory is selected,and you want to change the memory in use.•Access codes — to change the security code, PIN code, UPIN code, PIN2 code,or restriction password•Code in use — to select whether the PIN code or UPIN code should be active•Authority certificates or User certificates — to view the list of theauthority or user certificates downloaded into your device. See"Certificates," p. 85.•Security module settings — to view Security module details, activateModule PIN request, or change the module PIN and signing PIN. See "Accesscodes," p. 11.Software updates over the airWarning:  If you install a software update, you cannot use the device,even to make emergency calls, until the installation is completed andthe device is restarted. Be sure to back up data before acceptinginstallation of an update.Your service provider may send device software updates over the air directlyto your device (network service). This option may not be available, dependingon your device.Settings62CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 62 May 8, 2007 4:09:52 PM
Software update settingsTo allow or disallow software updates, select Menu > Settings >Configuration > Device manager settings > Service provider softwareupdates and the following options:•{No display_text mapping for 'qtn_list_allowremoteman',locale='en'} — to perform all software downloads and updatesautomatically•{No display_text mapping for 'qtn_list_rejectremoteman',locale='en'} — to reject all software updates•{No display_text mapping for 'qtn_list_confirmremmanfirst',locale='en'} — to perform software downloads and updates only after yourconfirmation (default setting)Request a software updateSelect Menu > Settings > Phone > Phone updates to request availablesoftware updates from your service provider. Select Current softwaredetails to display the current software version and check whether an updateis needed. Select Download phone software to download and install asoftware update. Follow the instructions on the display.Install a software updateIf the installation was canceled after the download, select Install softwareupdate to start the installation.The software update may take several minutes. If there are problems with theinstallation, contact your service provider.Restore factory settingsTo reset some of the menu settings to their original values, select Menu >Settings > Restore factory sett.. Enter the security code.The names and phone numbers saved in Contacts are not deleted.Settings63CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 63 May 8, 2007 4:09:52 PM
12. Operator menuThis menu lets you access a portal to services provided by your networkoperator. The name and the icon depend on the operator. For more informationcontact your network operator. The operator can update this menu with aservice message. See "Service inbox," p. 83.13. GalleryCopyright protections may prevent some images, music (including ringingtones), and other content from being copied, modified, transferred orforwarded.Manage images, video clips, music files, themes, graphics, tones, recordings,and received files. These files are stored in the device memory or an attachedmemory card and may be arranged in folders.Your device supports an activation key system to protect acquired content.Always check the delivery terms of any content and activation key beforeacquiring them, as they may be subject to a fee.Folders and filesTo see the list of folders, select Menu > Gallery.To view the list of files in a folder, select a folder and Open.To see the available options of a folder or a file, select a folder or a file andOptions.To view the folders of the memory card when moving a file, scroll to the memorycard, and press the scroll key right.Operator menu64CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 64 May 8, 2007 4:09:52 PM
Print imagesYour device supports Nokia XPressPrint to print images that are in the .jpegformat.To connect your device to a compatible printer, use a data cable or send theimage by Bluetooth to a printer supporting Bluetooth technology. See "PCconnectivity," p. 87.Select the image you want to print and Options > Print.Memory cardWarning:  Keep all memory cards out of the reach of small children.Use a memory card to store your multimedia files such as video clips, musictracks, sound files, images, and messaging data.Some of the folders in Gallery with content that the device uses (for example,Themes) may be stored on the memory card.To insert a memory card, see "Insert a microSD card", p. 15.Format the memory cardSome supplied memory cards are preformatted; others require formatting.Consult your retailer to find out if you must format the memory card before youcan use it. When you format a memory card, all data on the card is permanentlylost.To format a memory card, select Menu > Gallery or Applications, the memorycard folder  , and Options > Format mem. card > Yes.When formatting is complete, enter a name for the memory card.Lock the memory cardSet a password to lock your memory card against unauthorized use.Gallery65CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 65 May 8, 2007 4:09:52 PM
Select the memory card folder   and Options > Set password. Thepassword can be up to eight characters long. The password is stored in yourdevice, and you do not have to enter it again while you are using the memorycard on the same device. If you want to use the memory card on another device,you are asked for the password.To delete the password, select Options > Delete password.Check memory consumptionCheck the memory consumption of different data groups and the availablememory to install new applications or software on your memory card.Select the memory card   and Options > Details.14. MediaMedia playerView, play, and download files, such as images, audio, video, and animatedimages; or view compatible streaming videos from a network server (networkservice).Select Menu > Media > Media player > Open Gallery, Bookmarks, Go toaddress, or Media downloads to select or download media.Select Menu > Media > Media player > FF/Rew interval to set the stepwidth for fast forward or rewind.Configuration for a streaming serviceYou may receive the configuration settings required for streaming as aconfiguration message from the service provider. See "Configuration settingservice," p. 12. You can also enter the settings manually. See"Configuration," p. 60.To activate the settings, do the following:Media66CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 66 May 8, 2007 4:09:52 PM
1. Select Menu > Media > Media player > Streaming sett. >Configuration.2. Select a service provider, Default, or Personal config. for streaming.3. Select Account and a streaming service account contained in the activeconfiguration settings.Music playerYour device includes a music player for listening to music tracks or other MP3or AAC sound files that you have downloaded from the web or transferred tothe device with Nokia PC Suite. See "Nokia PC Suite," p. 87.Music files stored in the music folder in the device memory or on the memorycard are automatically detected and added to the music library during thestartup of the device.To open the music player, select Menu > Media > Music player.Play music tracksWarning:  Listen to music at a moderate level. Continuous exposure tohigh volume may damage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, because the volume may beextremely loud.Operate the music player with the virtual keys on the display.When you open Music player, the details of the first track on the default tracklist are shown. To start playing, select  .To adjust the volume level, use the volume keys of the device.To pause the playing, select  .To skip to the next track, select  . To skip to the beginning of the previoustrack, select   twice.To fast forward the current track, select and hold  . To rewind the currenttrack, select and hold  . Release the key at the position you want.Media67CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 67 May 8, 2007 4:09:52 PM
To stop the music player, press and hold the end key.Music player optionsIn the music player menu, select from the following options:•Show tracks  — View all available tracks of the active track list and play thedesired track. To play a track, scroll to the desired track, and select Play.•Music library —  View all available tracks ordered according to Artists,Albums, Genres, Composers, or Track lists. Select Update libr. to refreshthe lists. To find track lists generated with the Nokia Music Manager, selectTrack lists > My tracks.•Play options —  Select Random to play the tracks on the track list in randomorder. Select Repeat to play the current track or the entire track listrepeatedly.•Media equaliser —  to select or define an equalizer setting•Add to Favourites —  to add the current track to the favorite track list•Play via Bluetooth —  to connect and play the tracks on an audio accessoryusing Bluetooth technology•Use tone —  Set the currently played music track, for example, as a ringingtone.•Send —  to send the current track by a multimedia message or usingBluetooth technology•Web page —  to access a web page associated with the currently playedtrack, which is dimmed if no web page is available.•Music downloads —  to connect to a web service•Memory status —  to view the free and used memory capacityVoice recorderRecord speech, sound, or an active call, and save them in Gallery. This is usefulwhen recording a name and phone number to write down later.Record sound1. Select Menu > Media > Recorder. To use the graphical keys  ,  , oron the display, scroll left or right to the desired key, and select it.Media68CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 68 May 8, 2007 4:09:52 PM
2. To start the recording, select  . To start the recording during a call, selectOptions > Record. While recording a call, all parties to the call hear a faintbeeping. When recording a call, hold the device in the normal position nearto your ear. To pause the recording, select  .3. To end the recording, select  . The recording is saved in Gallery >Recordings.Select from the following Options:•Play last recorded —  to listen to the latest recording•Send last recorded —  to send the last recording•Recordings list  — Select Recordings to see the list of recordings in GalleryEqualizerControl the sound when using the music player by amplifying or diminishingfrequency bands.Select Menu > Media > Equaliser.To activate a set, scroll to one of the equalizer sets, and select Activate.To view, edit, or rename a selected set, select Options > View, Edit, orRename.Not all sets can be edited or renamed.Stereo wideningStereo widening enhances the audio output of the device when you are usinga stereo headset by enabling a wider stereo sound effect.To change the setting, select Menu > Media > Stereo widening.Media69CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 69 May 8, 2007 4:09:52 PM
15. Push to talkPush to talk (PTT) is a two-way radio service available over a GPRS cellularnetwork (network service).You can use PTT to have a conversation with one person or with a group ofpeople (channel) having compatible devices. While you are connected to thePTT service, you can use the other functions of the device.To check availability, costs, additional features and to subscribe to the service,contact your service provider. Roaming services may be more limited than fornormal calls. This feature may not be available, depending on your phone.Before you can use the PTT service, you must define the required PTT servicesettings. See "PTT settings," p. 73. See "Configuration settings," p. 74.PTT channelsPTT channel typesA PTT channel comprises a group of people (for example, friends or a workteam) who joined the channel after they were invited. When you call a channel,all members joined to the channel hear the call simultaneously.In a Public channel, every channel member can invite other persons; in aPrivate channel, only the channel creator can invite others.You can set the status of each channel to Active or Inactive.The number of active channels and the number of members per channel islimited. Contact your service provider for details.Create a channelTo add a channel, select Menu > Push to talk > Add channel, and enter thesettings in the form fields.Push to talk70CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 70 May 8, 2007 4:09:52 PM
To send an invitation to the channel, select Yes. To send further invitations,select Menu > Push to talk > Channel list, a channel, and Options > Sendinvitation.Switch PTT on and offTo connect to the PTT service, select Menu > Push to talk > Switch PTTon.   indicates the PTT connection.   indicates that the service is temporarilyunavailable. If you have added channels to the phone, you are automaticallyjoined to the active channels.To disconnect from the PTT service, select Switch PTT off.You may assign a default function to the PTT (volume up) key to open thechannel list, the contacts list, or a single channel or contact. See "PTTsettings," p. 73.Make and receive a PTT callWarning:  Do not hold the device near your ear when the loudspeakeris in use, because the volume may be extremely loud.To make a channel call, a one-to-one call, or a call to multiple recipients, youmust hold the PTT (volume up) key as long as you talk. To listen to the response,release the PTT (volume up) key.Check the login status of your contacts in Menu > Push to talk > Contactslist:   - person available,   - person unknown,   - person does not want tobe disturbed, but can receive callback request,   - person has PTT switchedoff.This service depends on your network operator and is only available forsubscribed contacts. To subscribe a contact, select Options > Subscribecontact, or if one or more contacts are already marked, Subscribe marked.Make a channel callTo make a call to a channel, select Channel list in the PTT menu, scroll to thedesired channel, and press and hold the PTT (volume up) key.Push to talk71CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 71 May 8, 2007 4:09:52 PM
Make a one-to-one callTo start a one-to-one call, select Menu > Contacts > Names, or Menu >Push to talk > Callback inbox, Channel list, or Contacts list. Select a contact,a member, or a nickname, and press and hold the PTT (volume up) key.Make a PTT call to multiple recipientsYou can select multiple PTT contacts from the contact list.1. Select Menu > Push to talk >  Contacts list, and mark the desired contacts.2. Press and hold the PTT (volume up) key to start the call. The participatingcontacts are shown on the display as soon as they join the call.3. Press and hold the PTT (volume up) key to talk to them. Release the PTT(volume up) key to hear the response.4. Press the end key to terminate the call.Receive a PTT callA short tone notifies you of an incoming PTT call, which you can accept or reject.When you press and hold the PTT (volume up) key while the caller is talking,you hear a queuing tone, and Queuing is displayed. Wait for the other personto finish; then you can talk immediately.Callback requestsSend a callback requestIf you make a one-to-one call and do not get a response, you can send a callbackrequest from following lists:•Menu > Contacts > Names•Menu > Push to talk > Callback inbox, Channel list, or Contacts listSelect a contact, a member, or a nickname and Options > Send PTTcallback.Push to talk72CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 72 May 8, 2007 4:09:52 PM
Respond to a callback requestWhen someone sends you a callback request, Callback request received isdisplayed in the standby mode. To open the Callback inbox, select View. Thelist of nicknames of the persons who have sent you callback requests is shown.To make a one-to-one call, select the desired request, and press and hold thePTT (volume up) key.Add a one-to-one contactYou can save the names of persons to whom you often make one-to-one callsin the following ways:•To add a PTT address to a name in Contacts, search for the desired contact,and select Details > Options > Add detail > PTT address. A contactappears in the PTT contact list only if you enter a PTT address.•To add a contact to the PTT contacts list, select Menu > Push to talk >Contacts list > Options > Add contact.•To add a contact from the channel list, connect to the PTT service, selectChannel list, and scroll to the desired channel. Select Members, scroll to themember whose contact information you want to save, and select Options.•To add a new contact, select Save as. To add a PTT address to a name inContacts, select Add to contact.PTT settingsSelect Menu > Push to talk > PTT settings and from the following options:•1 to 1 calls — Select On to allow the reception of incoming one-to-one calls.To set the device to first notify you of incoming one-to-one calls with aringing tone, select Notify.•PTT key default function — to set the PTT (volume up) key to one of thefollowing functions: Open contact list, Open channel list, or Call contact/group. Select a contact, a group, or Call PTT channel; and select a channel.When you press and hold the PTT (volume up) key, the selected function isperformed.Push to talk73CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 73 May 8, 2007 4:09:52 PM
•Show my login status — to enable or disable the sending of the login status•PTT status in startup — Select Yes or Ask first to automatically connect tothe PTT service when you switch the device on.•Push to talk when abroad — to switch the PTT service on or off when thedevice is used outside of the home network•Send my PTT address — Select No to hide your PTT address from channeland one-to-one calls.Configuration settingsYou may receive the settings for connecting to the service from your serviceprovider. See "Configuration setting service," p. 12. You can also enter thesettings manually. See "Configuration," p. 60.To select the settings for connecting to the service, select Menu > Push totalk > Config. settings.16. ApplicationsYou can manage applications and games. These files are stored in the devicememory or an attached memory card and may be arranged in folders.You can format, lock, and unlock the memory card. See "Memory card," p. 65.Launch a gameYour device software may include some games.Select Menu > Applications > Games. Scroll to the desired game, and selectOpen.To set sounds, lights, and shakes for the game, select Menu > Applications >Options > App. settings. You can select more options. See "Applicationoptions," p. 75.Applications74CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 74 May 8, 2007 4:09:52 PM
Launch an applicationYour device software may include some Java applications.Select Menu > Applications > Collection. Scroll to an application, and selectOpen.Application options•Update version  — to verify that a new version of the application is availablefor download from the web (network service)•Web page —  to provide further information or additional data for theapplication from an internet page (network service), if available•App. access —  to restrict the application from accessing the networkDownload an applicationYour device supports J2ME Java applications. Ensure that the application iscompatible with your device before downloading it.Important:  Only install and use applications and other software fromtrusted sources, such as applications that are Symbian Signed or havepassed the Java VerifiedTM testing.You can download new Java applications and games in different ways.•Select Menu > Applications > Options > Downloads > App.downloads; the list of available bookmarks is shown. See"Bookmarks," p. 81.•Use the Nokia Application Installer from PC Suite to download theapplications to your device.For the availability of different services, pricing, and tariffs, contact your serviceprovider.Your device may have some bookmarks or links preinstalled for or may allowaccess to sites provided by third parties not affiliated with Nokia. Nokia doesnot endorse or assume any liability for these sites. If you choose to access them,Applications75CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 75 May 8, 2007 4:09:52 PM
you should take the same precautions, for security or content, as you wouldwith any internet site.17. OrganizerAlarm clockTo set the device to sound an alarm at a desired time, select Menu >Organiser > Alarm clock.Set the alarmTo set the alarm, select Alarm time, and enter the alarm time.To change the alarm time when the alarm time is set, select On.To set the device to alert you on selected days of the week, select Repeatalarm.To select the alarm tone, select Alarm tone.To set a snooze time-out, select Snooze time-out and the time.Stop the alarmWhen the alarm time is reached, the device sounds an alert tone and flashesAlarm! and the current time on the display, even if the device is switched off.To stop the alarm, select Stop. If you let the device continue to sound the alarmfor a minute or select Snooze, the alarm stops for the time you set in Snoozetime-out, then resumes.If the alarm time is reached while the device is switched off, the device switchesitself on and starts sounding the alarm tone. If you select Stop, the device askswhether you want to activate the device for calls. Select No to switch off thedevice or Yes to make and receive calls. Do not select Yes when wireless deviceuse may cause interference or danger.Organizer76CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 76 May 8, 2007 4:09:52 PM
CalendarSelect Menu > Organiser > Calendar.The current day has a frame around the number. If there are any notes set forthe day, the day is in bold type. To view the day notes, select View. To view aweek, select Options > Week view. To delete all notes in the calendar, selectthe month or week view, and Options > Delete all notes.In Settings you can set the date, time, time zone, date or time format, dateseparator, default view, or the first day of the week. In Auto-delete notes youcan set the device to delete old notes automatically after a specified time.Make a calendar noteSelect Menu > Organiser > Calendar.Scroll to the date, and select Options > Make a note and one of the followingnote types:   Meeting,   Call ,  Birthday,   Memo, or   Reminder.Fill in the fields.Note alarmThe device displays the note, and, if an alarm is set, sounds a tone. If a call note is displayed, press the call key to make the call.To stop the alarm and to view the note, select View. To stop the alarm for 10minutes, select Snooze. To stop the alarm without viewing the note, selectExit.To-do listSave a note for a task that you must do.Select Menu > Organiser > To-do list. To make a note if no note is added,select Add note; otherwise, select Options > Add. Fill in the fields, and selectSave.Organizer77CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 77 May 8, 2007 4:09:52 PM
To view a note, scroll to it, and select View. While viewing a note, you can alsoselect an option to edit the attributes. You can also select an option to deletethe selected note and delete all the notes that you have marked as done.NotesTo write and send notes, select Menu > Organiser > Notes.To make a note if no note is added, select Add note; otherwise, selectOptions > Make a note. Write the note, and select Save.CalculatorThe calculator in your device provides basic arithmetic and trigonometricfunctions, calculates the square and the square root, the inverse of a number,and converts currency values.Note:  This calculator has limited accuracy and is designed for simplecalculations.Calculations - Select Menu > Organiser > Calculator. When 0 is displayedon the screen, enter the first number in the calculation. Press # for a decimalpoint. Scroll to the desired operation or function, or select it from theOptions. Enter the second number. Repeat this sequence as many times as itis necessary.Currency conversion - To perform a currency conversion select Options >Exchange rate. Select either of the displayed options. Enter the exchange rate,press # for a decimal point, and select OK. The exchange rate remains in thememory until you replace it with another one. To perform the currencyconversion, enter the amount to be converted, and select Options > Indomestic or In foreign.Note:  When you change the base currency, you must enter newexchange rates because all previously set exchange rates are cleared.Organizer78CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 78 May 8, 2007 4:09:52 PM
TimersCountdown timer1. To activate the countdown timer, select Menu > Organiser > Timer >Normal timer, enter the alarm time, and write a note that is displayed whenthe time expires. To change the countdown time, select Change time.2. To start the timer, select Start.3. To stop the timer, select Stop timer.Interval timer1. To have an interval timer with up to 10 intervals started, first enter theintervals.2. Select Menu > Organiser > Timer > Interval timer.3. To start the timer, select Start timer > Start.StopwatchYou can measure time, take intermediate times, or take lap times using thestopwatch. During timing, the other functions of the device can be used.Using the stopwatch or allowing it to run in the background when using otherfeatures increases the demand on battery power and reduces the battery life.Select Menu > Organiser > Stopwatch and from the following options:•Split timing — to take intermediate times. To start the time observation,select Start. Select Split every time that you want to take an intermediatetime. To stop the time observation, select Stop. To save the measured time,select Save. To start the time observation again, select Options > Start. Thenew time is added to the previous time. To reset the time without saving it,select Reset.•Lap timing — to take lap times•Continue — to view the timing that you have set in the background•Show last — to view the most recently measured time if the stopwatch isnot reset•View times or Delete times — to view or delete the saved timesOrganizer79CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 79 May 8, 2007 4:09:52 PM
To set the stopwatch timing in the background, press the end key.18. WebImportant:  Use only services that you trust and that offer adequatesecurity and protection against harmful software.With your device browser, access various mobile internet services that usewireless markup language (WML) or extensible hypertext markup language(XHTML) on their pages. Appearance may vary due to screen size. You may notbe able to view all details of the internet pages.Check the availability of these services, pricing, tariffs, and instructions withyour service provider.Set up browsingYou may receive the configuration settings required for browsing as aconfiguration message from the service provider that offers the service thatyou want to use. See "Configuration setting service," p. 12.You can also enter all the configuration settings manually. See"Configuration," p. 60.Connect to a serviceEnsure that the correct configuration settings of the service are activated.1. To select the settings for connecting to the service, select Menu > Web >Settings > Configuration settings.2. Select Configuration. Only the configurations that support browsingservice are shown. Select a service provider, Default, or Personal config.for browsing. See "Set up browsing," p. 80.3. Select Account and a browsing service account contained in the activeconfiguration settings.Web80CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 80 May 8, 2007 4:09:52 PM
4. Select Display terminal window > Yes to perform manual userauthentication for intranet connections.Make a connection to the service in one of the following ways: Select Menu >Web > Home; or in the standby mode, press and hold 0.To select a bookmark of the service, select Menu > Web > Bookmarks.To select the last URL, select Menu > Web > Last web address.To enter the address of the service, select Menu > Web > Go to address.Enter the address of the service, and select OK.Browse pagesAfter you make a connection to the service, you can start browsing its pages.The function of the device keys may vary in different services. Follow the textguides on the device display. For more information, contact your serviceprovider.Browse with phone keysTo browse through the page, scroll in any direction.To select an item, press the call key or Select.To enter letters and numbers, press 0 to 9.To enter special characters, press *.Direct callingWhile browsing, you can make a phone call and save a name and a phonenumber from a page.BookmarksYou can save page addresses as bookmarks in the device memory.1. While browsing, select Options > Bookmarks; or in the standby mode,select Menu > Web > Bookmarks.Web81CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 81 May 8, 2007 4:09:52 PM
2. Select a bookmark, or press the call key to connect to the page.3. Select Options to create and manage bookmarks.Your device may have some bookmarks or links preinstalled for or may allowaccess to sites provided by third parties not affiliated with Nokia. Nokia doesnot endorse or assume any liability for these sites. If you choose to access them,you should take the same precautions, for security or content, as you wouldwith any internet site.When you receive a bookmark, 1 bookmark received is displayed. To view thebookmark, select Show.Appearance settingsWhile browsing, select Options > Other options > Appear. settings; or inthe standby mode, select Menu > Web > Settings > Appearancesettings and from the following options:•Text wrapping — to select how the text is displayed•Font size — to set the font size•Show images — Select No to hide images on the page.•Alerts — Select Alert for unsecure connection > Yes to set the device toalert you when a secure connection changes to an unsecure connection whilebrowsing.•Alerts — Select Alert for unsecure items > Yes to set the device to alertwhen a secure page contains an unsecure item. These alerts do notguarantee a secure connection. See "Browser security," p. 85.•Character encoding — Select Content encoding to set the encoding forthe browser page content.•Character encoding — Select Unicode (UTF-8) web addresses > On toset the device to send a URL as UTF-8 encoding.•Screen size — to set the screen layout to Full or Small•JavaScript — to enable the Java scriptsWeb82CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 82 May 8, 2007 4:09:52 PM
Security settingsCookiesA cookie is data that a site saves in the cache memory of your device. Cookiesare saved until you clear the cache memory. See "Cache memory," p. 84.While browsing, select Options > Other options > Security > Cookiesettings; or in the standby mode, select Menu > Web > Settings > Securitysettings > Cookies.To allow or prevent the device from receiving cookies, select Allow or Reject.Scripts over secure connectionYou can select whether to run scripts from a secure page. The device supportsWML scripts.While browsing, to allow the scripts, select Options > Other options >Security > WMLScript sett.; or in the standby mode, select Menu > Web >Settings > Security settings > WMLScripts over secure connection >Allow.Download settingsTo automatically save all downloaded files in Gallery, select Menu > Web >Settings > Downloading settings > Automatic saving > On.Service inboxThe device is able to receive service messages sent by your service provider(network service). Service messages are notifications (for example, newsheadlines) that may contain a text message or an address of a service.Service inbox accessSelect Show to access the Service inbox when you receive a service message.Web83CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 83 May 8, 2007 4:09:52 PM
If you select Exit, the message is moved to the Service inbox.To access the Service inbox later, select Menu > Web > Service inbox. Toaccess the Service inbox while browsing, select Options > Other options >Service inbox. Scroll to the message you want, and select Retrieve to activatethe browser and download the complete message.To display detailed information on the service notification or delete themessage, select Options > Details or Delete.Service inbox settingsSelect Menu > Web > Settings > Service inbox settings and from thefollowing options:•Service messages — to set whether you want to receive service messages•Message filter — Select On to set the device to receive service messagesonly from content authors approved by the service provider. To view the listof the approved content authors, select Trusted channels.•Automatic connection — Select On to set the device to automaticallyactivate the browser from the standby mode, when the device has receiveda service message. If you select Off, the device activates the browser onlyafter you select Retrieve when the device has received a service message.Cache memoryA cache is a memory location that is used to store data temporarily. If you havetried to access or have accessed confidential information requiring passwords,empty the cache after each use. The information or services you have accessedare stored in the cache.To clear the cache while browsing, select Options > Other options > Clearthe cache.In the standby mode, select Menu > Web > Clear the cache.Web84CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 84 May 8, 2007 4:09:52 PM
Browser securitySecurity features may be required for some services, such as online banking orshopping. For such connections you need security certificates and possibly asecurity module, which may be available on your SIM card. For moreinformation, contact your service provider.Security moduleThe security module improves security services for applications requiring abrowser connection and allows you to use a digital signature. The securitymodule may contain certificates as well as private and public keys. Thecertificates are saved in the security module by the service provider.To view or change the security module settings, select Menu > Settings >Security > Security module settings.CertificatesImportant:  Even if the use of certificates makes the risks involved inremote connections and software installation considerably smaller,they must be used correctly in order to benefit from increased security.The existence of a certificate does not offer any protection by itself; thecertificate manager must contain correct, authentic, or trustedcertificates for increased security to be available. Certificates have arestricted lifetime. If "Expired certificate" or "Certificate not valid yet" isshown even if the certificate should be valid, check that the current dateand time in your device are correct.There are three kinds of certificates: server certificates, authority certificates,and user certificates. You may receive these certificates from your serviceprovider. Authority certificates and user certificates may also be saved in thesecurity module by your service provider.To view the list of the authority or user certificates downloaded to your phone,select Menu > Settings > Security > Authority certificates or Usercertificates.Web85CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 85 May 8, 2007 4:09:52 PM
 is displayed during a connection if the data transmission between thephone and the content server is encrypted.The security icon does not indicate that the data transmission between thegateway and the content server (or place where the requested resource isstored) is secure. The service provider secures the data transmission betweenthe gateway and the content server.Digital signatureYou can create digital signatures with your phone if your SIM card has a securitymodule. The digital signature is the same as signing your name to a paper bill,contract, or other document.To create a digital signature, select a link on a page (for example, the title ofthe book you want to buy and its price). The text to be signed is shown andmay include the amount and date.Check that the header text is Read and that the digital signature icon  isshown. If the digital signature icon does not appear, there is a security breach;do not enter any personal data (such as your signing PIN).To sign the text, read all of the text first, and select Sign. The text may not fitwithin a single screen. Therefore, make sure to scroll through and read all ofthe text before signing.Select the user certificate you want to use, and enter the signing PIN. The digitalsignature icon disappears, and the service may display a confirmation of yourpurchase.19. SIM servicesYour SIM card may provide additional services. You can access this menu onlyif it is supported by your SIM card. The name and contents of the menu dependon the available services.SIM services86CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 86 May 8, 2007 4:09:52 PM
For availability and information on using SIM card services, contact your SIMcard vendor. This may be the service provider or other vendor.To set the phone to show you the confirmation messages sent between yourphone and the network when you are using the SIM services, select Menu >Settings > Phone > Confirm SIM service actions > Yes.Accessing these services may involve sending messages or making a phone callfor which you may be charged.20. PC connectivitySend and receive e-mail, and access the internet when your device is connectedto a compatible PC through a Bluetooth, an infrared, or a data cable connection.Use your device with a variety of PC connectivity and data communicationsapplications.Nokia PC SuiteWith Nokia PC Suite you can synchronize contacts, calendar, notes, and to-donotes between your device and the compatible PC or a remote internet server(network service). You may find more information and PC Suite on the Nokiawebsite. See "Nokia support," p. 13.Packet data, HSCSD, and CSDWith your phone, you can use the packet data, high-speed circuit switched data(HSCSD), and circuit switched data (CSD, GSM data) data services. For availabilityand subscription to data services, contact your service provider.The use of HSCSD services consumes the battery faster than normal voice ordata calls.PC connectivity87CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 87 May 8, 2007 4:09:52 PM
BluetoothUse Bluetooth technology to connect your compatible laptop to the internet.Your phone must have activated a service provider that supports internetaccess, and your PC has to support Bluetooth PAN (personal area network). Afterconnecting to the network access point (NAP) service of the phone and pairingwith your PC, your phone automatically opens a packet data connection to theinternet. PC Suite software installation is not necessary when using the NAPservice of the phone. See "Bluetooth wireless technology," p. 54.Data communication applicationsFor information on using a data communication application, refer to thedocumentation provided with it.Making or answering phone calls during a computer connection is notrecommended as it might disrupt the operation.For better performance during data calls, place the device on a stationarysurface with the keypad facing downward. Do not move the device during adata call. For example, do not hold the device during a data call.21. BatteryBattery informationYour device is powered by a rechargeable battery. The battery can be chargedand discharged hundreds of times, but it will eventually wear out. When thetalk and standby times are noticeably shorter than normal, replace the battery.Use only Nokia approved batteries, and recharge your battery only with Nokiaapproved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has notbeen used for a prolonged period, it may be necessary to connect the charger,then disconnect and reconnect it to begin charging the battery.Battery88CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 88 May 8, 2007 4:09:52 PM
Unplug the charger from the electrical plug and the device when not in use. Donot leave a fully charged battery connected to a charger, since overchargingmay shorten its lifetime. If left unused, a fully charged battery will lose its chargeover time.If the battery is completely discharged, it may take several minutes before thecharging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or batterythat is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when ametallic object such as a coin, clip, or pen causes direct connection of thepositive (+) and negative (-) terminals of the battery. (These look like metalstrips on the battery.) This might happen, for example, when you carry a sparebattery in your pocket or purse. Short-circuiting the terminals may damage thebattery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer orwinter conditions, will reduce the capacity and lifetime of the battery. Alwaystry to keep the battery between 15°C and 25°C (59°F and 77°F). A device witha hot or cold battery may not work temporarily, even when the battery is fullycharged. Battery performance is particularly limited in temperatures wellbelow freezing.Do not dispose of batteries in a fire as they may explode. Batteries may alsoexplode if damaged. Dispose of batteries according to local regulations. Pleaserecycle when possible. Do not dispose as household waste.Do not dismantle or shred cells or batteries. In the event of a battery leak, donot allow the liquid to come in contact with the skin or eyes. In the event ofsuch a leak, flush your skin or eyes immediately with water, or seek medicalhelp.Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are gettingan original Nokia battery, purchase it from an authorized Nokia dealer, look forBattery89CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 89 May 8, 2007 4:09:52 PM
the Nokia Original Enhancements logo on the packaging, and inspect thehologram label using the following steps:Successful completion of the four steps is not a total assurance of theauthenticity of the battery. If you have any reason to believe that your batteryis not an authentic, original Nokia battery, you should refrain from using it, andtake it to the nearest authorized Nokia service point or dealer for assistance.Your authorized Nokia service point or dealer will inspect the battery forauthenticity. If authenticity cannot be verified, return the battery to the placeof purchase.Authenticate hologram1. When looking at the hologram on the label, you shouldsee the Nokia connecting hands symbol from one angleand the Nokia Original Enhancements logo when lookingfrom another angle.2. When you angle the hologram left, right, down, and up,you should see 1, 2, 3, and 4 dots on each siderespectively.3. Scratch the side of the label to reveal a 20-digit code, forexample, 12345678919876543210. Turn the battery sothat the numbers are facing upwards. The 20-digit codereads starting from the number at the top row followedby the bottom row.4. Confirm that the 20-digit code is valid by following the instructions atwww.nokia.com/batterycheck.Battery90CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 90 May 8, 2007 4:09:52 PM
What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the labelis an authentic Nokia battery, please do not use the battery. Take it to thenearest authorized Nokia service point or dealer for assistance. The use of abattery that is not approved by the manufacturer may be dangerous and mayresult in poor performance and damage to your device and its enhancements.It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.Battery91CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 91 May 8, 2007 4:09:52 PM
Care and maintenanceYour device is a product of superior design and craftsmanship and should betreated with care. The following suggestions will help you protect yourwarranty coverage.•Keep the device dry. Precipitation, humidity, and all types of liquids ormoisture can contain minerals that will corrode electronic circuits. If yourdevice does get wet, remove the battery, and allow the device to drycompletely before replacing it.•Do not use or store the device in dusty, dirty areas. Its moving parts andelectronic components can be damaged.•Do not store the device in hot areas. High temperatures can shorten the lifeof electronic devices, damage batteries, and warp or melt certain plastics.•Do not store the device in cold areas. When the device returns to its normaltemperature, moisture can form inside the device and damage electroniccircuit boards.•Do not attempt to open the device other than as instructed in this guide.•Do not drop, knock, or shake the device. Rough handling can break internalcircuit boards and fine mechanics.•Do not use harsh chemicals, cleaning solvents, or strong detergents to cleanthe device.•Do not paint the device. Paint can clog the moving parts and prevent properoperation.•Use a soft, clean, dry cloth to clean any lenses, such as camera, proximitysensor, and light sensor lenses.•Use only the supplied or an approved replacement antenna. Unauthorizedantennas, modifications, or attachments could damage the device and mayviolate regulations governing radio devices.•Use chargers indoors.92CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 92 May 8, 2007 4:09:52 PM
•Always create a backup of data you want to keep, such as contacts andcalendar notes.•To reset the device from time to time for optimum performance, power offthe device and remove the battery.These suggestions apply equally to your device, battery, charger, or anyenhancement. If any device is not working properly, take it to the nearestauthorized service facility for service.DisposalThe crossed-out wheeled-bin symbol on your product, literature, orpackaging reminds you that in the European Union all electrical andelectronic products, batteries, and accumulators must be taken toseparate collection at the end of their working life. Do not dispose of theseproducts as unsorted municipal waste.Return the products to collection to prevent possible harm to the environmentor human health from uncontrolled waste disposal and to promote thesustainable reuse of material resources. Collection information is available fromthe product retailer, local waste authorities, national producer responsibilityorganizations, or your local Nokia representative. For more information, seeproduct Eco-Declaration or country-specific information at www.nokia.com.Additional safety informationSmall childrenYour device and its enhancements may contain small parts. Keep them out ofthe reach of small children.Operating environmentThis device meets RF exposure guidelines when used either in the normal useposition against the ear or when positioned at least 2.2 centimeters (7/8 inches)Additional safety information93CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 93 May 8, 2007 4:09:52 PM
away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device theabove-stated distance from your body.To transmit data files or messages, this device requires a quality connection tothe network. In some cases, transmission of data files or messages may bedelayed until such a connection is available. Ensure the above separationdistance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to thedevice. Do not place credit cards or other magnetic storage media near thedevice, because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment, including wireless phones,may interfere with the functionality of inadequately protected medical devices.Consult a physician or the manufacturer of the medical device to determine ifthey are adequately shielded from external RF energy or if you have anyquestions. Switch off your device in health care facilities when any regulationsposted in these areas instruct you to do so. Hospitals or health care facilitiesmay be using equipment that could be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend that a minimum separation of15.3 centimeters (6 inches) should be maintained between a wireless deviceand an implanted medical device, such as a pacemaker or implantedcardioverter defibrillator, to avoid potential interference with the medicaldevice. Persons who have such devices should:•Always keep the wireless device more than 15.3 centimeters (6 inches) fromthe medical device when the wireless device is turned on.•Not carry the wireless device in a breast pocket.•Hold the wireless device to the ear opposite the medical device to minimizethe potential for interference.Additional safety information94CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 94 May 8, 2007 4:09:52 PM
•Turn the wireless device off immediately if there is any reason to suspectthat interference is taking place.•Read and follow the directions from the manufacturer of their implantedmedical device.If you have any questions about using your wireless device with an implantedmedical device, consult your health care provider.Hearing aidsSome digital wireless devices may interfere with some hearing aids. Ifinterference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronicsystems in motor vehicles such as electronic fuel injection systems, electronicantiskid (antilock) braking systems, electronic speed control systems, and airbag systems. For more information, check with the manufacturer, or itsrepresentative, of your vehicle or any equipment that has been added.Only qualified personnel should service the device or install the device in avehicle. Faulty installation or service may be dangerous and may invalidate anywarranty that may apply to the device. Check regularly that all wireless deviceequipment in your vehicle is mounted and operating properly. Do not store orcarry flammable liquids, gases, or explosive materials in the same compartmentas the device, its parts, or enhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do not place objects, includinginstalled or portable wireless equipment in the area over the air bag or in theair bag deployment area. If in-vehicle wireless equipment is improperlyinstalled and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your devicebefore boarding an aircraft. The use of wireless teledevices in an aircraft maybe dangerous to the operation of the aircraft, disrupt the wireless telephonenetwork, and may be illegal.Additional safety information95CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 95 May 8, 2007 4:09:52 PM
Potentially explosive environmentsSwitch off your device when in any area with a potentially explosiveatmosphere, and obey all signs and instructions. Potentially explosiveatmospheres include areas where you would normally be advised to turn offyour vehicle engine. Sparks in such areas could cause an explosion or fireresulting in bodily injury or even death. Switch off the device at refueling pointssuch as near gas pumps at service stations. Observe restrictions on the use ofradio equipment in fuel depots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress. Areas with a potentiallyexplosive atmosphere are often, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storage facilities, vehicles usingliquefied petroleum gas (such as propane or butane), and areas where the aircontains chemicals or particles such as grain, dust, or metal powders.Emergency callsImportant:  Wireless phones, including this device, operate using radiosignals, wireless networks, landline networks, and user-programmedfunctions. Because of this, connections in all conditions cannot beguaranteed. You should never rely solely on any wireless device foressential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequate signal strength.Some networks may require that a valid SIM card is properly inserted in thedevice.2. Press the end key as many times as needed to clear the display and readythe device for calls.3. Enter the official emergency number for your present location. Emergencynumbers vary by location.4. Press the call key.Additional safety information96CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 96 May 8, 2007 4:09:52 PM
If certain features are in use, you may first need to turn those features off beforeyou can make an emergency call. Consult this guide or your service provider formore information.When making an emergency call, give all the necessary information asaccurately as possible. Your wireless device may be the only means ofcommunication at the scene of an accident. Do not end the call until givenpermission to do so.CERTIFICATION INFORMATION (SAR)This mobile device meets guidelines for exposure to radio waves.Your mobile device is a radio transmitter and receiver. It is designed not toexceed the limits for exposure to radio waves recommended by internationalguidelines. These guidelines were developed by the independent scientificorganization ICNIRP and include safety margins designed to assure theprotection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurementknown as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Testsfor SAR are conducted using standard operating positions with the devicetransmitting at its highest certified power level in all tested frequency bands.The actual SAR level of an operating device can be below the maximum valuebecause the device is designed to use only the power required to reach thenetwork. That amount changes depending on a number of factors such as howclose you are to a network base station. The highest SAR value under the ICNIRPguidelines for use of the device at the ear is 0.96 W/kg.Use of device accessories and enhancements may result in different SAR values.SAR values may vary depending on national reporting and testing requirementsand the network band. Additional SAR information may be provided underproduct information at www.nokia.com.Your mobile device is also designed to meet the requirements for exposure toradio waves established by the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of 1.6 W/kg averaged overAdditional safety information97CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 97 May 8, 2007 4:09:52 PM
one gram of tissue. The highest SAR value reported under this standard duringproduct certification for use at the ear is 1.13 W/kg and when properly wornon the body is 0.38 W/kg.Additional safety information98CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 98 May 8, 2007 4:09:52 PM
IndexSymbols/Numerics1-touch dialing 48, 58Aaccess codes 11active standby 21, 51alarm clock 76antenna 17anykey answer 58applications 74, 75audio messaging 33automatic redial 58Bbackground image 51battery 88charging 16battery charge status 20blacklist 37Bluetooth 54, 55, 87, 88bookmarks 81browser 80appearance settings 82bookmarks 81browse pages 81cache 84certificates 85cookies 83digital signature 86security 85WML scripts 83Ccache memory 84calculator 78calendar 77note 77call forward 58call functions 24call key 18call log 49call waiting 25, 59caller id 59callsanswer 25dialed 49international 24making of 24missed 49options 25received 49reject 25voice dialing 25capitals 26caselower 26upper 26certificates 85channel types 70characters 26charge the battery 16clock 52codes 1199CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 99 May 8, 2007 4:09:52 PM
configuration 60configuration setting service 12connectivity 87contact information 13contacts 441-touch dialing 48business cards 47copy 46delete 47dialing shortcuts 48edit details 47groups 46info numbers 48move 46my numbers 48save details 45save names 45save phone numbers 45search 46service numbers 48settings 45synchronize 47cookies 83countdown timer 79CSD 87currency conversion 78customer service 13Ddatacommunication 88transfer 56data cable 58, 87date settings 52dialing 24dialing shortcuts 24, 48digital signature 86display 20, 51downloads 12, 83Ee-mail application 34earpiece 18edit text 26end key 18ending a call 24enhancements 60equalizer 69exchange rate 78Ffactory settings 63flash messages 32flight mode 22flight query 59See also flight modefont size 51Ggallery 64files 64folders 64games 74HhandsfreeSee loudspeakerheadphones 17headset 17Index100CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 100 May 8, 2007 4:09:52 PM
help text 60HSCSD 87Iidle mode 19indicators 21info messages 41info numbers 48installation 14instant messaging 37internet 80interval timer 79Jjunk folder 37Kkeyguard 23, 59keypad 18keypad lock 23keys 18call key 18end key 18keyguard 23keypad 18keypad lock 23power 18scroll key 18selection keys 18Llanguage 59voice playback 59location information 49log 49loudspeaker 18, 25Mmedia player 66memory card 65insert 15memory full 33menu 27message center number 29message sending 31messagesaudio messaging 33delete 41flash messages 32folders 34info messages 41postcard 32service commands 41settings 42SIM messages 42text 28voice messages 41microphone 18microSD cardinsert 15MMSSee multimedia messagesmultimedia messages 29music player 67my numbers 48Nnavigation 27navigation keyIndex101CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 101 May 8, 2007 4:09:52 PM
See scroll keyNokia contact information 13note 77notes 78number dialing 24number mode 26Ooffline mode 23operator menu 64organizer 76Ppacket data 87parts 18PC connectivity 87PC Suite 87phone software updates 59phonebookSee contactsphonelockSee keypad lockPictBridge 58PIN codes 11positioning 49postcards 32power key 18power saver 51power saving 20predictive text input 27print images 65profiles 50PTTSee push to talkPUK codes 11push to talk 70settings 74pushed messages 83Rrecorder 68redial 58restriction password 11Sscreen 51screen saver 51scroll key 18scrolling 27securitybrowser 85certificates 85codes 11module 85security code 11selection keys 18serviceinbox 83messages 83service commands 41service numbers 48services 80SIM 86settings 50active standby 51Bluetooth 54browser appearance 82call 58Index102CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 102 May 8, 2007 4:09:52 PM
clock 52configuration 60data transfer 56date 52display 51downloads 83enhancements 60font size 51messages 42phone 59power saver 51profiles 50push to talk 73, 74restoring 63screen saver 51security 61service inbox 84shortcuts 52sleep mode 51standby mode 52themes 50time 52time zone 52tones 51USB data cable 58wallpaper 51shortcuts 21, 52left selection key 52right selection key 52scroll key 53voice commands 53signal strength 20SIMmessages 42services 86SIM card 23installation 14sleep mode 51SMSSee text messagesoftware update 12, 62, 63requesting 63spam filter 37standby mode 19, 52start up tone 60status indicators 20stereo widening 69stopwatch 79strap 17streaming service 66synchronization 56Ttext 26text message 28text modes 26themes 50time settings 52time zone 52timer 79to-do list 77tones 51traditional text input 27Uunlock keypad 23USB connector 18USB data cable 58Index103CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 103 May 8, 2007 4:09:52 PM
Vvoice clarity 58voice commands 53voice dailing 25voice messages 41voice recorder 68volume key 18Wwallpaper 51web 80welcome note 59wireless markup language 80WML scripts 83write text 26XXHTML 80Index104CyanCyanMagentaMagentaYellowYellowBlackBlackfile:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-BF2275776152.xml Page 104 May 8, 2007 4:09:52 PM

Navigation menu