Microsoft RM-274 GSM 900/ 1800/ 1900 Cellphone with Bluetooth User Manual Manual
Microsoft Mobile Oy GSM 900/ 1800/ 1900 Cellphone with Bluetooth Manual
Manual
Nokia 3109 classic User Guide
9200417
Issue 1
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 1 May 8, 2007 4:09:52 PM
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-274 product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found at www.nokia.com/phones/
declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Care, Visual Radio, and Navi are trademarks or registered trademarks of Nokia
Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the
prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic
Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in
connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer
engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a
licensed video provider. No license is granted or shall be implied for any other use. Additional information, including
that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any
of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS
LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications for these products may vary by region. Please check with your
Nokia dealer for details, and availability of language options.
The third-party applications provided with your device may have been created and may be owned by persons or entities
not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-
party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the
0434
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 2 May 8, 2007 4:09:52 PM
applications, or the information in the applications or these materials. Nokia does not provide any warranty for the
third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE
THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and
other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving
equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC
rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Check www.nokia.com/support to get the latest version of this guide, contacts, information and
additional services and also to download PC Suite and other software. Consult the nearest service
point and set up your phone.
9200417/Issue 1
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 3 May 8, 2007 4:09:52 PM
Contents
For your safety ................................7
About your device...........................8
Network services.............................9
Shared memory...............................9
Enhancements...............................10
1. General information................11
Access codes....................................................11
Configuration setting service....................12
Download content........................................12
Software updates..........................................12
Nokia support.................................................13
2. Get started.................................14
Install SIM card and battery.......................14
Insert a microSD card...................................15
Charge the battery........................................16
Antenna............................................................17
Headset.............................................................17
Strap..................................................................17
3. Your device................................18
Keys and parts................................................18
Switch the device on and off.....................19
Standby mode................................................19
Flight mode.....................................................22
Keypad lock (keyguard)...............................23
Functions without a SIM card....................23
4. Call functions.............................24
Make a call.......................................................24
Answer or reject a call..................................25
Options during a call....................................25
5. Write text...................................26
Text modes......................................................26
Traditional text input...................................27
Predictive text input.....................................27
6. Navigate the menus.................27
7. Messaging..................................28
Text messages................................................28
Multimedia messages..................................29
Message sending process...........................31
Postcards..........................................................32
Flash messages..............................................32
Nokia Xpress audio messaging.................33
Memory full.....................................................33
Folders..............................................................34
E-mail application.........................................34
Instant messages..........................................37
Voice messages..............................................41
Info messages................................................41
Service commands........................................41
Delete messages............................................41
SIM messages..................................................42
Message settings...........................................42
8. Contacts......................................44
Save names and phone numbers.............45
Save details.....................................................45
Settings.............................................................45
Groups...............................................................46
Search for a contact......................................46
Copy or move contacts.................................46
Edit contact details.......................................47
Delete contacts...............................................47
Synchronize all...............................................47
Business cards................................................47
Dialing shortcuts............................................48
Info, service, and my numbers..................48
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 4 May 8, 2007 4:09:52 PM
9. Call log.........................................49
10. Positioning..............................49
11. Settings....................................50
Profiles..............................................................50
Themes.............................................................50
Tones.................................................................51
Display...............................................................51
Time and date................................................52
My shortcuts....................................................52
Infrared.............................................................53
Bluetooth.........................................................54
Packet data......................................................55
Data transfer...................................................56
USB data cable................................................58
Call......................................................................58
Phone................................................................59
Enhancements................................................60
Configuration..................................................60
Security.............................................................61
Software updates over the air..................62
Restore factory settings..............................63
12. Operator menu.......................64
13. Gallery.......................................64
Folders and files.............................................64
Print images....................................................65
Memory card...................................................65
14. Media........................................66
Media player....................................................66
Music player.....................................................67
Voice recorder................................................68
Equalizer...........................................................69
Stereo widening............................................69
15. Push to talk..............................70
PTT channels...................................................70
Switch PTT on and off..................................71
Make and receive a PTT call........................71
Callback requests...........................................72
Add a one-to-one contact...........................73
PTT settings.....................................................73
Configuration settings.................................74
16. Applications.............................74
Launch a game...............................................74
Launch an application..................................75
Application options......................................75
Download an application............................75
17. Organizer.................................76
Alarm clock......................................................76
Calendar............................................................77
To-do list..........................................................77
Notes.................................................................78
Calculator.........................................................78
Timers...............................................................79
Stopwatch........................................................79
18. Web...........................................80
Set up browsing.............................................80
Connect to a service......................................80
Browse pages.................................................81
Bookmarks.......................................................81
Appearance settings.....................................82
Security settings............................................83
Download settings........................................83
Service inbox...................................................83
Cache memory................................................84
Browser security............................................85
19. SIM services.............................86
20. PC connectivity........................87
Nokia PC Suite.................................................87
Packet data, HSCSD, and CSD......................87
Bluetooth.........................................................88
Data communication applications...........88
21. Battery......................................88
Battery information......................................88
Contents
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 5 May 8, 2007 4:09:52 PM
Nokia battery authentication
guidelines........................................................89
Care and maintenance.................92
Disposal............................................................93
Additional safety
information....................................93
Small children.................................................93
Operating environment...............................93
Medical devices..............................................94
Vehicles.............................................................95
Potentially explosive
environments.................................................96
Emergency calls..............................................96
CERTIFICATION INFORMATION
(SAR)..................................................................97
Index................................................99
Contents
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 6 May 8, 2007 4:09:52 PM
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when
it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation.
Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
7
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 7 May 8, 2007 4:09:52 PM
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important
information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in service. Press
the end key as many times as needed to clear the display and return to the
standby mode. Enter the emergency number, then press the call key. Give your
location. Do not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for use on the on the
EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for
more information about networks.
When using the features in this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing
tones), and other content from being copied, modified, transferred, or
forwarded.
About your device
8
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 8 May 8, 2007 4:09:52 PM
Warning: To use any features in this device, other than the alarm clock, the
device must be switched on. Do not switch the device on when wireless device
use may cause interference or danger.
Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all
networks; other networks may require that you make specific arrangements with your
service provider before you can use the network services. Your service provider can give
you instructions and explain what charges will apply. Some networks may have
limitations that affect how you can use network services. For instance, some networks
may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device menu. Your
device may also have a special configuration such as changes in menu names, menu
order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as multimedia messaging (MMS), e-mail application, instant
messaging, remote synchronization, and content downloading using the browser or
MMS, require network support for these technologies.
Shared memory
The following features in this device may share memory: gallery, contacts, text messages,
multimedia messages, and instant messages, e-mail, calendar, to-do notes, Java™ games
and applications, and note application. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. Your device may
display a message that the memory is full when you try to use a shared memory feature.
Network services
9
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 9 May 8, 2007 4:09:52 PM
In this case, delete some of the information or entries stored in the shared memory
features before continuing.
Enhancements
Practical rules about accessories and enhancements
•Keep all accessories and enhancements out of the reach of small children.
•When you disconnect the power cord of any accessory or enhancement, grasp and pull
the plug, not the cord.
•Check regularly that enhancements installed in a vehicle are mounted and are
operating properly.
•Installation of any complex car enhancements must be made by qualified personnel
only.
Enhancements
10
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 10 May 8, 2007 4:09:52 PM
1. General information
Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. You can change the code, and set
the phone to request the code. See "Security," p. 61.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See "Security," p. 61.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required
for some functions.
The module PIN is required to access the information in the security module.
See "Security module," p. 85.
The signing PIN is required for the digital signature. See "Digital
signature," p. 86.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact your local service
provider for the codes.
Restriction password
The restriction password (4 digits) is required when using Call barring
service. See "Security," p. 61.
11
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 11 May 8, 2007 4:09:52 PM
Configuration setting service
To use some of the network services, such as mobile internet services, MMS,
Nokia Xpress audio messaging, or remote internet server synchronization, your
device needs the correct configuration settings. For more information on
availability, contact your service provider, the nearest authorized Nokia dealer,
or visit the support area on the Nokia website. See "Nokia support," p. 13.
When you have received the settings as a configuration message and the
settings are not automatically saved and activated, Configuration sett.
received is displayed.
To save the settings, select Show > Save. If required, enter the PIN code
supplied by the service provider .
To discard the received settings, select Exit or Show > Discard.
Download content
You may be able to download new content (for example, themes) to your phone
(network service).
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
For the availability of different services, pricing, and tariffs, contact your service
provider.
Software updates
Nokia may produce software updates that may offer new features, enhanced
functions, or improved performance. You may be able to request these updates
through the Nokia Software Updater PC application. To update the device
software, you need the Nokia Software Updater application and a compatible
PC with Microsoft Windows 2000 or XP operating system, broadband internet
access, and a compatible data cable to connect your device to the PC.
General information
12
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 12 May 8, 2007 4:09:52 PM
To get more information and to download the Nokia Software Updater
application, visit www.nokiausa.com/softwareupdate or your local Nokia
website.
If software updates over the air are supported by your network, you may also
be able to request updates through the device.
See "Software updates over the air," p. 62.
Downloading software updates may involve the transmission of large amounts
of data through your service provider's network. Contact your service provider
for information about data transmission charges.
Make sure that the device battery has enough power, or connect the charger
before starting the update.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Nokia support
Support information
Check www.nokia.com/support or your local Nokia website for the latest
version of this guide, additional information, downloads, and services related
to your Nokia product.
Configuration settings service
You may also download free configuration settings such as MMS, GPRS, e-mail,
and other services for your device model at www.nokia.com/support.
Nokia PC Suite
You may find PC Suite and related information on the Nokia website at
www.nokia.com/support.
General information
13
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 13 May 8, 2007 4:09:52 PM
Customer service
If you need to contact customer service, check the list of local
Nokia Care contact centers at www.nokia.com/
customerservice.
Maintenance
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
2. Get started
Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider or other vendor.
This device is intended for use with a BL-5C battery. Always use original Nokia
batteries. See "Nokia battery authentication guidelines," p. 89.
The SIM card and its contacts can be easily damaged by scratches or bending,
so be careful when handling, inserting, or removing the card.
1. Slide the release button (1) to
unlock and remove the back
cover (2). Remove the battery as
shown (3).
Get started
14
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 14 May 8, 2007 4:09:52 PM
2. Open the SIM card holder (4).
Insert the SIM card (5) with the
contact surface facing down into
the holder. Close the SIM card
holder (6).
3. Observe the battery contacts (7),
and insert the battery (8). Place
the upper part of the back cover
on the device (9), and close it
(10).
Insert a microSD card
Use only compatible microSD cards approved by Nokia for use with this device.
Nokia uses approved industry standards for memory cards, but some brands
may not be fully compatible with this device. Incompatible cards may damage
the card and the device and corrupt data stored on the card.
1. Switch the device off, and remove the back cover and the battery of the
device.
2. Slide the memory card holder to unlock (1).
3. Open the card holder (2), and insert the memory card
into the card holder with the contact surface facing
inwards (3).
Get started
15
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 15 May 8, 2007 4:09:52 PM
4. Close the card holder (4), and slide the card holder to
lock it (5).
5. Insert the battery, and attach the back cover to the device.
Charge the battery
Check the model number of any charger before use with this device. This device
is intended for use when supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other types
may invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the socket on the
bottom of your device.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger used. Charging
a BL-5C battery with the AC-3 charger takes approximately 2 hours and 45
minutes while the device is in the standby mode.
Get started
16
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 16 May 8, 2007 4:09:52 PM
Antenna
Your device has an internal antenna.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched
on. Contact with the antenna affects call
quality and may cause the device to operate
at a higher power level than otherwise
needed. To optimize antenna performance
and battery life, avoid contact with the
antenna area when operating the device.
Headset
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Pay special attention to volume level if you connect any other headsets to the
device.
Warning: When you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset where it can endanger
your safety.
Do not connect products that create an output signal as this may cause
damage to the device. Do not connect any voltage source to the Nokia
AV Connector.
When connecting any external device or any headset, other than those
approved by Nokia for use with this device, to the Nokia AV Connector,
pay special attention to volume levels.
Strap
1. Open the back cover.
Get started
17
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 17 May 8, 2007 4:09:52 PM
2. Hook a strap behind the clamp as shown in the
picture (1) and close the back cover (2).
3. Your device
Keys and parts
1 — Earpiece
2 — Display
3 — Left selection key
4 — Call key
5 — Infrared (IR) port
6 — Navi™ key: 4-way scroll key and middle selection key
7 — Right selection key
8 — End key
9 — Keypad
10 — Microphone
Your device
18
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 18 May 8, 2007 4:09:52 PM
11 — Charger connector
12 — Nokia AV Connector (2.5 mm)
13 — Mini USB cable connector
14 — Volume down key
15 — Volume up key
16 — Power key
17 — Loudspeaker
Switch the device on and off
To switch the device on or off, press and hold the power key. See "Keys and
parts," p. 18.
If the device prompts for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
The device may prompt you to set the time and date. Enter the local time, select
the time zone of your location in terms of the time difference with respect to
Greenwich mean time (GMT), and enter the date. See "Time and
date," p. 52.
When you switch on your device for the first time and the device is in the
standby mode, you may be prompted to get the configuration settings from
your service provider (network service). For more information refer to Connect
to service provider support. See "Configuration," p. 60. See "Configuration
setting service," p. 12.
Standby mode
When the device is ready for use, and you have not entered any characters, the
device is in the standby mode.
Your device
19
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 19 May 8, 2007 4:09:52 PM
Display
1 — Signal strength of the cellular network
2 — Battery charge status
3 — Indicators
4 — Name of the network or the operator logo
5 — Clock
6 — Main screen
7 — The function of the left selection key is Go to or a shortcut to another
function. See "Left selection key," p. 52.
8 — The function of the middle selection key is Menu.
9 — The function of the right selection key is Names or a shortcut to another
function. See "Right selection key," p. 52. Operator variants may have an
operator-specific name to access an operator-specific website.
Power saving
Your device has a Power saver and a Sleep mode feature in order to save
battery power in the standby mode when no key of the device is pressed. These
features may be activated. See "Display," p. 51.
Your device
20
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 20 May 8, 2007 4:09:52 PM
Active standby
The active standby mode displays a list of selected device features and
information that you can directly access.
To switch active standby on or off, select Menu > Settings > Display >
Active standby > Active standby mode > On or Off.
In the standby mode, scroll up or down to navigate in the list, and choose
Select or View. The arrows indicate that further information is available. To
stop navigation, select Exit.
To organize and change the active standby mode, select Options and from the
available options.
Shortcuts in the standby mode
To access the list of dialed numbers, press the call key once. Scroll to the number
or name, and press the call key to call the number.
To open the web browser, press and hold 0.
To call your voice mailbox, press and hold 1.
Use keys as a shortcut. See "My shortcuts," p. 52.
Indicators
unread messages
unsent, canceled, or failed messages
missed call
/ Your phone is connected to the IM service, and the availability status is
online or offline.
instant messages received
The keypad is locked.
The phone does not ring for an incoming call or text message.
Your device
21
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 21 May 8, 2007 4:09:52 PM
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running in the background.
/ The phone is registered to the GPRS or EGPRS network.
/ A GPRS or EGPRS connection is established.
/ The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
/ A push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to the device.
Calls are limited to a closed user group.
The timed profile is selected.
/ / A headset, handsfree, or loopset is connected to the device.
Flight mode
You can deactivate all radio frequency functions and still have access to offline
games, calendar, and phone numbers.
Use the flight mode in radio sensitive environments—on board aircraft or in
hospitals. When the flight mode is active, is shown.
Select Menu > Settings > Profiles > Flight > Activate or Personalise to
activate or set up the flight mode.
To deactivate the flight mode, select any other profile.
Emergency call in flight mode - Enter the emergency number, press the call
key, and select Yes when Exit flight profile? is displayed. The phone attempts
to make an emergency call.
Your device
22
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 22 May 8, 2007 4:09:52 PM
Warning: With the flight profile you cannot make or receive any calls,
including emergency calls, or use other features that require network
coverage. To make calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the lock code. If
you need to make an emergency call while the device is locked and in
the flight profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and select
'Call'. The device will confirm that you are about to exit flight profile to
start an emergency call.
Keypad lock (keyguard)
To prevent accidental keypresses, select Menu, and press * within 3.5 seconds
to lock the keypad.
To unlock the keypad, select Unlock, and press * within 1.5 seconds. If Security
keyguard is set to On, enter the security code if requested.
To answer a call when keyguard is on, press the call key. When you end or reject
the call, the keypad automatically locks.
Further features are Automatic keyguard and Security keyguard. See
"Phone," p. 59.
When the keyguard is on, calls may be possible to the official emergency
number programmed into your device.
Functions without a SIM card
Several functions of your device may be used without installing a SIM card (for
example, the data transfer with a compatible PC or another compatible device).
Some functions appear dimmed in the menus and cannot be used.
Your device
23
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 23 May 8, 2007 4:09:52 PM
4. Call functions
Make a call
Number dialing
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code,
the area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key. To adjust the volume in a call, press
the volume key up or down.
3. To end the call or to cancel the call attempt, press the end key.
You can search for a name or phone number that you have saved in Contacts.
See "Search for a contact," p. 46. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9. See "Dialing
shortcuts," p. 48.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If Speed dialling is set to On, press and hold a number key until the call begins.
Further details are described in Speed dialling. See "Call," p. 58.
Call functions
24
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 24 May 8, 2007 4:09:52 PM
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the device.
Voice commands are language-dependent. Set the Voice recognition
language before using voice dialing. See "Phone," p. 59.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key or the volume
down key. A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice
recognition is successful, a list with matches is shown. The device plays the
voice command of the first match on the list. If it is not the correct command,
scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice
dialing. See "Voice commands," p. 53.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end
key.
To reject an incoming call, press the end key. To mute the ringing tone, select
Silence.
To answer a waiting call during an active call (network service), press the call
key. The first call is put on hold. To end the active call, press the end key. You
may also activate the Call waiting function. See "Call," p. 58.
Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
Call functions
25
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 25 May 8, 2007 4:09:52 PM
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Voice clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
•Send DTMF — to send tone strings
•Swap — to switch between the active call and the call on hold
•Transfer — to connect a call on hold to an active call and disconnect yourself
•Conference — to make a conference call
•Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
5. Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or
predictive text input.
When you write text, press and hold Options to toggle between traditional
text input, indicated by , and predictive text input, indicated by . Not
all languages are supported by predictive text input.
The character cases are indicated by , , and . To change the character
case, press #. To change from the letter to number mode, indicated by ,
press and hold #, and select Number mode. To change from the number to
the letter mode, press and hold #.
To set the writing language, select Options > Writing language.
Write text
26
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 26 May 8, 2007 4:09:52 PM
Traditional text input
Press a number key, 2 to 9, repeatedly until the desired character appears. The
available characters depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears and enter the letter.
To access the most common punctuation marks and special characters,
repeatedly press the number key 1 or press * to select a special character.
Predictive text input
Predictive text input is based on a built-in dictionary to which you can also add
new words.
1. Start writing a word, using the keys 2 to 9. Press each key only once for one
letter.
2. When you finish writing the word and it is correct, to confirm it by adding
a space, press 0.
If the word is not correct, press * repeatedly, and select the word from the
list.
If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell. Enter
the word using traditional text input, and select Save. To write compound
words, enter the first part of the word, and press the scroll key right to
confirm it. Write the last part of the word, and confirm the word.
3. Start writing the next word.
6. Navigate the menus
The device offers you an extensive range of functions that are grouped into
menus.
Navigate the menus
27
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 27 May 8, 2007 4:09:52 PM
1. To access the menu, select Menu.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select one (for example,
Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back.
To exit the menu, select Exit.
To change the menu view, select Options > Main menu view > List or
Grid.
To rearrange the menu, scroll to the menu to be moved, and select Options >
Organise > Move. Scroll to where you want to move the menu, and select
OK. To save the change, select Done > Yes.
7. Messaging
You can read, write, send, and save text, multimedia, e-mail, audio, and flash
messages and postcards. All messages are organized into folders.
Text messages
Your device supports the sending of text messages beyond the character limit
for a single message. Longer messages are sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options, take up
more space, limiting the number of characters that can be sent in a single
message.
With the short message service (SMS) you can send and receive text messages
and receive messages that can contain pictures (network service).
Messaging
28
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 28 May 8, 2007 4:09:52 PM
Before you can send any text message, you must save your message center
number. See "Message settings," p. 42.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider. You can save an e-mail address in Contacts. See "Save
details," p. 45.
Write and send a text message
1. Select Menu > Messaging > Create message > Text message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address, select Add.
3. For a SMS e-mail, enter a subject in the Subject: field.
4. Write your message in the Message: field.
An indicator at the top of the display shows the total number of characters
left and the number of messages needed for sending. For example, 673/2
means that there are 673 characters left and that the message will be sent
as a series of 2 messages.
5. To send the message, select Send. See "Message sending process," p. 31.
Read and reply to a text message
1. To view a received message, select Show. To view it later, select Exit.
2. To read the message later, select Menu > Messaging > Inbox. is
shown if you have unread messages in the inbox.
3. To reply to a message, select Reply and the message type.
4. Create the reply message.
5. To send the message, select Send. See "Message sending process," p. 31.
Multimedia messages
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving
device.
Messaging
29
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 29 May 8, 2007 4:09:52 PM
The wireless network may limit the size of MMS messages. If the inserted picture
exceeds this limit, the device may make it smaller so that it can be sent by MMS.
A multimedia message can contain text and objects such as images, sound clips,
or video clips.
To check availability and to subscribe to the multimedia messaging service
(MMS), contact your service provider. See "Message settings," p. 42.
Write and send a multimedia message
1. Select Menu > Messaging > Create message > Multimedia.
2. Create your message.
Your device supports multimedia messages that contain several pages
(slides). A message can contain a calendar note and a business card as
attachments. A slide can contain text, one image, and one sound clip; or text
and a video clip. To insert a slide in the message, select New; or select
Options > Insert > Slide. To insert a file in the message, select Insert.
3. To view the message before sending it, select Options > Preview.
4. To send the message, select Send.
5. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address, select Add.
6. For an SMS e-mail, enter a subject in the Subject: field.
7. To send the message, select Send. See "Message sending process," p. 31.
Write and send a multimedia plus message
Any content can be added to the multimedia plus message. Such content might
be images, video clips, sound clips, business cards, calendar notes, themes,
streaming links, or even unsupported files (for example, files received with an
e-mail).
1. Select Menu > Messaging > Create message > Multimedia plus.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address, select Add.
Messaging
30
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 30 May 8, 2007 4:09:52 PM
3. Enter a subject and write your message.
4. To insert a file in the message, select Insert or Options > Insert and the
file type.
5. To view the message before sending it, select Options > Preview.
6. To send the message, select Send. See "Message sending process," p. 31.
Read and reply to a multimedia message
Important: Exercise caution when opening messages. E-mail
messages or multimedia message objects may contain malicious
software or otherwise be harmful to your device or PC.
1. To view the received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a presentation,
select Play. To view the files in the presentation or the attachments, select
Options > Objects or Attachments.
3. To reply to the message, select Options > Reply and the message type.
4. Create the reply message.
5. To send the message, select Send. See "Message sending process," p. 31.
Message sending process
To send the message, select Send. The phone saves the message in the
Outbox folder, and the sending starts.
Note: Your device may indicate that your message was sent to the
message center number programmed into your device. Your device may
not indicate whether the message is received at the intended
destination. For more details about messaging services, contact your
service provider.
If an interruption occurs while the message is being sent, the phone tries to
resend the message a few times. If these attempts fail, the message remains
in the Outbox folder. To cancel the sending of the messages in the Outbox
folder, scroll to the desired message, and select Options > Cancel sending.
Messaging
31
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 31 May 8, 2007 4:09:52 PM
Postcards
With the postcard messaging service (network service), create and send
postcards that may contain an image and a greeting text. The postcard is sent
to the service provider using multimedia messaging. The service provider prints
the postcard and sends it to the postal address given with the message. MMS
must be activated before this service can be used.
Before you can use the postcard service, you must subscribe to the service. To
check the availability and costs and to subscribe to the service, contact your
service provider.
To send a postcard, select Menu > Messaging > Create message >
Postcard. Fill in the address; mandatory editor fields are marked by a *. Scroll
to the image field, select Insert and an image from the gallery, or New
image to insert a recent image; then write your greeting text. To send the
message, select Send.
Flash messages
Flash messages are text messages that are instantly displayed upon reception.
Flash messages are not automatically saved.
Write a flash message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number and write your message. The maximum length of a
flash message is 70 characters. To insert a blinking text into the message, select
Options > Insert blink char. to set a marker. The text after the marker blinks.
To end the blinking text range, insert a second marker.
Read and reply to a flash message
A received flash message is indicated with Message: and a few words from the
beginning of the message.
To read the message, select Read.
Messaging
32
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 32 May 8, 2007 4:09:52 PM
To extract numbers and addresses from the current message, select Options >
Use detail.
To save the message, select Save and the folder in which you want to save it.
Nokia Xpress audio messaging
You can use the MMS to create and send an audio message in a convenient way.
MMS must be activated before you can use audio messages.
Create a message
1. Select Menu > Messaging > Create message > Audio message. The
voice recorder opens. See "Voice recorder," p. 68.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve
a number.
4. To send the message, select Send.
Listen to a message
To open a received audio message, select Play.
If more than one message is received, select Show > Play.
To listen to the message later, select Exit.
Memory full
When you receive a message, and the memory for the messages is full, Memory
full. Unable to receive msgs. is displayed.
To delete old messages, select OK > Yes and the folder. Scroll to the desired
message, and select Delete.
To delete more messages, select Mark. Mark all the messages you want to
delete, and select Options > Delete marked.
Messaging
33
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 33 May 8, 2007 4:09:52 PM
Folders
The device saves received messages in the Inbox folder. Messages that have
not yet been sent are saved in the Outbox folder.
To set the device to save the sent messages in the Sent items folder, select
Menu > Messaging > Message settings > General settings > Save sent
messages.
To edit and send messages that you have written and saved in the drafts folder,
select Menu > Messaging > Drafts.
You can move messages to the Saved items folder. To organize your Saved
items subfolders, select Menu > Messaging > Saved items.
To add a folder, select Options > Add folder.
To delete or rename a folder, scroll to the desired folder, and select Options >
Delete folder or Rename folder.
To create a new template, save a message as a template, or access the template
list, and select Menu > Messaging > Saved items > Templates.
E-mail application
The e-mail application uses a packet data connection (network service) to allow
you to access your e-mail account. This e-mail application is different from the
SMS e-mail function. To use the e-mail function on your device, you need a
compatible e-mail system.
You can write, send, and read e-mail with your device. Your device supports
POP3 and IMAP4 e-mail servers. This application does not support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain a new
e-mail account or use your current account. To check the availability of your e-
mail account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service provider. You may receive
the e-mail configuration settings as a configuration message. See
"Configuration setting service," p. 12.
Messaging
34
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 34 May 8, 2007 4:09:52 PM
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See "E-mail messages," p. 44.
Setting wizard
The setting wizard starts automatically if no e-mail settings are defined in the
phone.
To enter the settings manually, select Menu > Messaging > E-mail >
Options > Manage accounts > Options > New. The options for Manage
accounts allow you to add, delete, and change the e-mail settings. Make sure
that you have defined the correct preferred access point for the operator. See
"Configuration," p. 60.
The e-mail application requires an internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
1. Select Menu > E-mail > Write new e-mail.
2. If more than one e-mail account is defined, select the account from which
you want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail
message. To attach a file from Gallery, select Options > Attach file.
4. To send the e-mail message, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select Send > Send
later.
To edit or continue writing your e-mail later, select Options > Save as
draft. The e-mail is saved in Outboxes > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail > Options >
Send now or Send/check e-mail.
Messaging
35
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 35 May 8, 2007 4:09:52 PM
Download e-mail
To download e-mail messages that have been sent to your e-mail account,
select Menu > Messaging > E-mail > Check new e-mail. If more than one
e-mail account is defined, select the account from which you want to download
the e-mail. The e-mail application only downloads e-mail headers at first. Select
Back > Inboxes, the account name, the new message, and Retrieve to
download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been saved in
the Outbox folder, select Options > Send/check e-mail.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail
messages or multimedia message objects may contain malicious
software or otherwise be harmful to your device or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name, and
the desired message.
2. To reply to an e-mail, select Reply > Original text or Empty message. To
reply to many, select Options > Reply to all. Confirm or edit the e-mail
address and subject; then write your reply.
3. To send the message, select Send > Send now.
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail account
in Inboxes. Inboxes contains the following folders: “Account name” for
incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for
sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving
unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent
items for saving e-mail that has been sent.
To manage the folders and their e-mail content, select Options to view the
available options of each folder.
Messaging
36
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 36 May 8, 2007 4:09:52 PM
Spam filter
The spam filter allows you to put specific senders on a black or white list. Black
list sender messages are filtered to Junk. Unknown and white list sender
messages are downloaded into the account inbox.
To activate and define a spam filter, select Options > Spam filter >
Settings in the main e-mail idle screen.
To blacklist a sender, select the e-mail message in the Inboxes folder and
Options > Blacklist sender.
Instant messages
Note: Depending on your IM service, you may not have access to all of
the features described in this guide.
With instant messaging (IM) (network service) you can send short, simple text
messages to online users. You have to subscribe to a service and register with
the IM service you want to use. For more information about signing up for IM
services, contact your service provider.
To set the required settings for the IM service, use the option Connect.
settings. See "Access," p. 37.
The icons and texts on the display may vary, depending on the IM service.
Access
Select Menu > Messaging > Instant messages. Instant messages may be
replaced by another term depending on the service provider. If more than one
set of connection settings for IM service is available, select the one you want.
Select from the following options:
•Login — to connect to the IM service. To set the phone to automatically
connect to the IM service when you switch on the phone, in the login session,
select Automatic login: > On.
•Saved convers. — to view, erase, or rename the conversations that you
saved during an IM session
Messaging
37
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 37 May 8, 2007 4:09:52 PM
•Connect. settings — to edit the settings needed for messaging and
presence connection
Connect
To connect to the service, access the instant messages menu, select the IM
service, if needed, and Login.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the service, your status, as seen by others, is shown in a
status line: Status: Online, My status: Busy, or Status: App. off. To change
your own status, select Change.
Below the status line there are three folders containing your contacts that show
their status: Conversations, Online (), and Offline (). To expand the folder,
scroll to it, and select Expand (or scroll right).
To collapse the folder, select Collapse (or scroll left).
•Conversations — shows the list of new and read instant messages or
invitations to IM during the active IM session:
indicates a new group message
indicates a read group message
indicates a new instant message
indicates a read instant message
indicates an invitation
The icons and texts on the display depends on the IM service.
•Online () — shows the number of contacts that are online
•Offline () — shows the number of contacts that are offline
To start a conversation, expand the online or the offline folder, scroll to the
contact with whom you want to chat, and select Chat. To answer an
Messaging
38
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 38 May 8, 2007 4:09:52 PM
invitation or reply to a message, expand the Conversations folder, scroll to
the contact to whom you want to chat, and select Open.
•Groups > Public groups — List of bookmarks to public groups provided by
the service provider (not visible if groups are not supported by the network).
To start an IM session with a group, scroll to a group, and select Join. Enter
the screen name that you want to use as your nickname in the conversation.
When you have successfully joined the group conversation, you can start a
group conversation. You can create a private group. See "Groups," p. 40.
•Search > Users or Groups — to search for other IM users or public groups
on the network by phone number, screen name, e-mail address, or name. If
you select Groups, you can search for a group by a member in the group,
group name, topic, or ID.
•Options > Chat or Join group — to start the conversation when you have
found the user or the group that you want
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than one
invitation is received, select an invitation and Open. To join the private group
conversation, select Accept, and enter the screen name you want to use as your
nickname. To reject or delete the invitation, select Options > Reject or
Delete.
Read an instant message
If you receive a new message that is not a message associated with an active
conversation, New instant message is displayed. To read it, select Read. If
more than one message is received, select a message and Open.
New messages received during an active conversation are held in Instant
messages > Conversations. If you receive a message from someone who is
not in IM contacts, the sender ID is displayed. To save a new contact that is not
in the phone memory, select Options > Save contact.
Messaging
39
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 39 May 8, 2007 4:09:52 PM
Participate in a conversation
To join or start an IM session, write your message, and select Send.
If you receive a new message during a conversation from a person who is not
taking part in the current conversation, is displayed, and the phone sounds
an alert tone. Write your message, and select Send. Your message is displayed,
and the reply message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu, select Options > Add
contact > By mobile number, Enter ID manually, Search from serv., or
Copy from server (depending on the service provider). To start a conversation,
scroll to a contact, and select Chat.
Block or unblock messages
When you are in a conversation and want to block messages, select Options >
Block contact.
To block messages from a specific contact in your contacts list, scroll to the
contact in Conversations, and select Options > Block contact > OK.
To unblock a contact, in the IM main menu, select Options > Blocked list.
Scroll to the contact you want to unblock, and select Unblock > OK.
Groups
You can use the public groups provided by the service provider or create your
own private groups for an IM conversation.
You can bookmark public groups that your service provider may maintain.
Connect to the IM service, and select Groups > Public groups. Select a group
and Join. If you are not in the group, enter your screen name as your nickname
for the group.
To delete a group from your list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Messaging
40
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 40 May 8, 2007 4:09:52 PM
To create a private group, connect to the IM service, and, from the main menu,
select Options > Create group. Enter the name for the group and the screen
name that you want to use as your nickname. Mark the private group members
in the contacts list, and write an invitation.
Voice messages
The voice mailbox is a network service to which you may need to subscribe. For
more information, contact your service provider.
To call your voice mailbox, select Menu > Messaging > Voice messages >
Listen to voice messages.
To enter, search for, or edit your voice mailbox number, select Voice mailbox
number.
If supported by the network, indicates new voice messages. To call your
voice mailbox number, select Listen.
Info messages
You can receive messages on various topics from your service provider (network
service). For more information, contact your service provider.
Select Menu > Messaging > Info messages and from the available options.
Service commands
Service commands allow you to write and send service requests (USSD
commands) to your service provider, such as activation commands for network
services.
To write and send the service request, select Menu > Messaging > Service
commands. For details, contact your service provider.
Delete messages
Delete a single message, all messages, or a folder.
Messaging
41
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 41 May 8, 2007 4:09:52 PM
To delete messages, select Menu > Messaging > Delete messages > By
message to delete a single message, By folder to delete all messages from a
folder, or All messages.
SIM messages
SIM messages are specific text messages that are saved to your SIM card.
You can copy or move those messages from the SIM to the phone memory, but
not vice versa.
To read SIM messages, select Menu > Messaging > Options > SIM
messages.
Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and
from the following options:
•Save sent messages — Select Yes to save the sent messages in the Sent
items folder.
•Overwriting in Sent items — Select Allowed to overwrite old sent
messages with the new ones when the message memory is full. This setting
is shown only if you select Save sent messages > Yes.
•Font size — Select the font size used in messages.
•Graphical smileys — Select Yes to set the device to replace character-based
smileys with graphical ones.
Text messages
The text message settings affect the sending, receiving, and viewing of text and
SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and from
the following options:
Messaging
42
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 42 May 8, 2007 4:09:52 PM
•Delivery reports — Select Yes to ask the network to send delivery reports
about your messages (network service).
•Message centres — Select Add centre to set the phone number and name
of the message center that is required for sending text messages. You receive
this number from your service provider.
•Message centre in use — to select the message center in use.
•E-mail message centres — Select Add centre to set the phone numbers
and name of the e-mail center for sending SMS e-mail.
•E-mail centre in use — to select the SMS e-mail message center in use
•Message validity — to select the length of time for which the network
attempts to deliver your message
•Messages sent via — to select the format of the messages to be sent:
Text, Paging, or Fax (network service)
•Use packet data — Select Yes to set GPRS as the preferred SMS bearer.
•Character support — Select Full to select all characters in the messages to
be sent as viewed. If you select Reduced, characters with accents and other
marks may be converted to other characters.
•Reply via same centre — Select Yes to allow the recipient of your message
to send you a reply using your message center (network service).
Multimedia messages
The message settings affect the sending, receiving, and viewing of multimedia
messages.
You may receive the configuration settings for multimedia messaging as a
configuration message. See "Configuration setting service," p. 12. You can also
enter the settings manually. See "Configuration," p. 60.
Select Menu > Messaging > Message settings > Multimedia msgs. and
from the following options:
•Delivery reports — Select Yes to ask the network to send delivery reports
about your messages (network service).
•Image size (multimedia plus) — to set the image size in multimedia plus
messages
•Image size (multimedia) — to set the image size in multimedia messages
Messaging
43
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 43 May 8, 2007 4:09:52 PM
•Default slide timing — to define the default time between slides in
multimedia messages
•Allow multimedia reception — Select Yes or No to receive or block the
multimedia message. If you select In home network, you cannot receive
multimedia messages when outside your home network. The default setting
of the multimedia message service is generally In home network. The
availability of this menu depends on your phone.
•Incoming multi- media messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set
to No.
•Allow adverts — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi-
media messages is set to Reject.
•Configuration settings — Select Configuration to display the
configurations that support multimedia messaging. Select a service
provider, Default, or Personal config. for multimedia messaging. Select
Account and an MMS account contained in the active configuration settings.
E-mail messages
The settings affect sending, receiving, and viewing e-mail. You may receive the
settings as a configuration message. See "Configuration setting
service," p. 12. You can also manually enter the settings. See
"Configuration," p. 60.
Select Menu > Messaging > Message settings > E-mail messages to
display the options.
8. Contacts
You can save names and phone numbers (contacts) in the device memory and
in the SIM card memory.
Contacts
44
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 44 May 8, 2007 4:09:52 PM
The device memory can save contacts with additional details, such as various
phone numbers and text items. You can also save an image for a limited number
of contacts.
The SIM card memory can save names with one phone number attached to
them. The contacts saved in the SIM card memory are indicated by .
Save names and phone numbers
Names and numbers are saved in the used memory.
To save a name and phone number, select Menu > Contacts > Names >
Options > Add new contact.
Save details
In the device memory you can save different types of phone numbers, a tone
or a video clip, and short text items for a contact.
The first number you save is automatically set as the default number and is
indicated with a frame around the number type indicator (for example, ).
When you select a name from contacts (for example, to make a call), the default
number is used unless you select another number.
Make sure that the memory in use is Phone or Phone and SIM. See
"Settings," p. 45.
Search for the contact to add a detail, and select Details > Options > Add
detail.
Select from the available options.
Settings
These settings define where the contact information is stored, how it is
displayed, and how much memory remains.
Select Menu > Contacts > Settings and from the following options:
Contacts
45
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 45 May 8, 2007 4:09:52 PM
•Memory in use — to select the SIM card or phone memory for your contacts.
Select Phone and SIM to recall names and numbers from both memories.
In that case, when you save names and numbers, they are saved in the phone
memory.
•Contacts view — to select how the names and numbers in Contacts are
displayed
•Name display — to select whether the contact’s first or last name is
displayed first
•Font size — to set the font size for the list of contacts
•Memory status — to view the free and used memory capacity
Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers
saved in the memory into caller groups with different ringing tones and group
images.
Search for a contact
Select Menu > Contacts > Names and scroll through the list of contacts, or
enter the first characters of the name to search.
Copy or move contacts
To copy or move a contact between the SIM card memory and the phone
memory, select Menu > Contacts > Names. Select the contact to copy or
move and Options > Copy contact or Move contact.
To copy or move several contacts, select the first contact to copy or move and
Options > Mark. Mark the other contacts, and select Options > Copy
marked or Move marked.
To copy or move all contacts between the SIM card memory and the phone
memory, select Menu > Contacts > Copy contacts or Move contacts.
Contacts
46
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 46 May 8, 2007 4:09:52 PM
The SIM card memory can save names with one phone number attached to
them.
Edit contact details
Search for the contact, and select Details.
To edit a name, number, or text item or to change the image, select Options >
Edit.
To change the number type, scroll to the desired number, and select Options >
Change type. To set the selected number as the default number, select
Options > Set as default.
Delete contacts
To delete a contact, search for the desired contact, and select Options > Delete
contact.
To delete all the contacts and the details attached to them from the phone or
SIM card memory, select Menu > Contacts > Delete all contacts > From
phone mem. or From SIM card.
To delete a number, text item, or an image attached to the contact, search for
the contact, and select Details. Scroll to the desired detail, and select
Options > Delete and from the available options.
Synchronize all
Synchronize your calendar, contacts data, and notes with a remote internet
server (network service). See "Synchronize from a server," p. 57.
Business cards
You can send and receive a person’s contact information from a compatible
device that supports the vCard standard as a business card.
Contacts
47
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 47 May 8, 2007 4:09:52 PM
To send a business card, search for the contact, and select Details > Options >
Send bus. card.
When you receive a business card, select Show > Save to save the business
card in the phone memory. To discard the business card, select Exit > Yes.
Dialing shortcuts
Your device can dial a phone number with one keypress. The number keys, 2
to 9, can have a phone number assigned to them. To assign a phone number
to a number key, select Menu > Contacts > Speed dials, and scroll to the
number to assign as the shortcut for Speed dialling.
Select Assign, or if a number has already been assigned to the key, select
Options > Change.
Select Search and the contact to assign the shortcut. If Speed dialling is off,
the phone asks whether you want to activate it.
To make a call using the shortcuts, press and hold the corresponding key. See
"Dialing shortcuts," p. 24.
Info, service, and my numbers
Select Menu > Contacts and from one of these submenus:
•Info numbers — to call the information numbers of your service provider
if the numbers are included on your SIM card (network service)
•Service numbers — to call the service numbers of your service provider, if
the numbers are included on your SIM card (network service)
•My numbers — to view the phone numbers assigned to your SIM card, if
the numbers are included on your SIM card.
Contacts
48
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 48 May 8, 2007 4:09:52 PM
9. Call log
The device registers your missed, received, and dialed calls if the network
supports it and the device is switched on and within the network service area.
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialled numbers.
To view your recent missed and received calls and the dialed numbers
chronologically, select Call log. T o view the contacts t o whom you most r ecently
sent messages, select Message recipients.
To view the approximate information on your recent communications, select
Menu > Log > Call duration, Packet data counter, or Packet data conn.
timer.
To view how many text and multimedia messages you have sent and received,
select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing,
taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service
or software upgrades.
10. Positioning
The network may send you a position request (network service). Contact your
service provider to subscribe and to agree upon the delivery of positioning
information.
To accept or reject the position request, select Accept or Reject. If you miss the
request, the phone automatically accepts or rejects it according to what you
have agreed with your network operator or service provider. The phone
Call log
49
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 49 May 8, 2007 4:09:52 PM
displays 1 missed position request. To view the missed positioning request,
select Show.
To view the information on the 10 most recent privacy notifications and
requests or to delete them, select Menu > Log > Positioning > Position
log > Open folder or Delete all.
11. Settings
Profiles
Your phone has various setting groups called profiles, for which you can
customize the phone tones for different events and environments.
Select Menu > Settings > Profiles, the desired profile, and from the following
options:
•Activate — to activate the selected profile
•Personalise — to personalize the profile. Select the setting you want to
change, and make the changes.
•Timed — to set the profile to be active until a certain time (up to 24 hours)
and set the end time. When the time set for the profile expires, the previous
profile that was not timed becomes active.
Themes
A theme contains elements for personalizing your device.
Select Menu > Settings > Themes and from the following options:
•Select theme — to set a theme. A list of folders in Gallery opens. Open the
Themes folder, and select a theme.
•Theme downloads — to open a list of links to download more themes
Settings
50
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 50 May 8, 2007 4:09:52 PM
Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the
Profiles menu. See "Profiles," p. 50.
To set the phone to only ring for calls from phone numbers that belong to a
selected caller group, select Alert for.
Select Options > Save to save the settings or Cancel to leave the settings
unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest
level after a few seconds.
Display
Select Menu > Settings > Display and from the available options:
•Wallpaper — to add the background image in the standby mode
•Wallpaper — to add the background image in the Home screen
•Active standby — to switch the active standby mode on or off and to
organize and personalize the active standby mode
•Standby mode font colour — to select the color for the texts in the standby
mode
•Navigation key icons — to display the icons of the current scroll key
shortcuts in the standby mode when active standby is off
•Screen saver — to set your device to display a screen saver. To download
more screen savers, select Graphic downloads. To set the time after which
the screen saver is activated, select Time-out.
•Power saver — to save some battery power. The date and a digital clock
are displayed when no function of the device is used for a certain time.
•Sleep mode — to save some battery power
•Font size — to set the font size for messaging, contacts, and web pages
•Operator logo — to set your device to display or hide the operator logo
•Cell info display — to display the cell identity, if available from the network
Settings
51
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 51 May 8, 2007 4:09:52 PM
Time and date
To change the clock type, time, time zone, and date settings, select Menu >
Settings > Time and date > Time, Date, or Auto-update of date & time
(network service).
When traveling to a different time zone, select Menu > Settings > Time and
date > Time > Time zone and the time zone of your location in terms of the
time difference with respect to Greenwich mean time (GMT) or coordinated
universal time (UTC). The time and date are set according to the time zone and
enable your device to display the correct sending time of received text or
multimedia messages.
My shortcuts
With personal shortcuts you get quick access to often used functions of the
device.
Left selection key
To select a function from the list, select Menu > Settings > My shortcuts >
Left selection key.
If the left selection key is Go to to activate a function, in the standby mode,
select Go to > Options and from the following options:
•Select options — to add a function to the shortcut list or to remove one
•Organise — to rearrange the functions on your personal shortcut list
Right selection key
To select a function from the list, select Menu > Settings > My shortcuts >
Right selection key.
Settings
52
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 52 May 8, 2007 4:09:52 PM
Navigation key
To assign other device functions from a predefined list to the navigation key
(scroll key), select Menu > Settings > My shortcuts > Navigation key.
Voice commands
Call contacts and carry out device functions by speaking a voice command.
Voice commands are language-dependent, and you must set the Voice
recognition language before using voice commands. See "Phone," p. 59.
To select the device function to activate with a voice command, select Menu >
Settings > My shortcuts > Voice commands and a folder. Scroll to a
function. indicates that the voice tag is activated. To activate the voice tag,
select Add. To play the activated voice command, select Play. See "Enhanced
voice dialing," p. 25.
To manage the voice commands, scroll to a device function, and select
Options and from the following:
•Edit or Remove — to change or deactivate the voice command of the
selected function
•Add all or Remove all — to activate or deactivate voice commands to all
functions in the voice commands list
Infrared
You can set up the phone to send and receive data through its infrared (IR) port
to or from a IRDA compatible phone or data device.
Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate or deactivate the IR port of your phone, select Menu > Settings >
Connectivity > Infrared.
Settings
53
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 53 May 8, 2007 4:09:52 PM
If the data transfer is not started within 2 minutes after the activation of the
IR port, the connection is cancelled and must be started again.
IR connection indicator
•When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
•When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
Bluetooth
Bluetooth wireless technology
Bluetooth technology allows you to connect the device to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth
technology communicate using radio waves, your device and the other devices
do not need to be in direct line-of-sight, although the connection can be subject
to interference from obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, network access, generic object exchange,
advanced audio distribution, audio video remote control, hands-free, headset,
object push, file transfer, dial-up networking, SIM access, and serial port. To
ensure interoperability between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this model. Check with the
manufacturers of other devices to determine their compatibility with this
device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Settings
54
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 54 May 8, 2007 4:09:52 PM
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the following
options:
•Bluetooth — Select On to activate the Bluetooth function. indicates that
Bluetooth is activated.
•My phone's visibility — to define how your device is shown to other
Bluetooth devices
•Search for audio enhancements — to search for compatible Bluetooth
audio devices. Select the device that you want to connect to the phone.
•Active devices — to check which Bluetooth connection is currently active
•Paired devices — to search for any Bluetooth device in range. Select New
to list any Bluetooth device in range. Select a device and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16 characters) to pair the device to
your device. You must only give this passcode when you connect to the device
for the first time. Your device connects to the other device, and you can start
data transfer.
•My phone's name — to set the device name for Bluetooth connections
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Always accept only Bluetooth communication
from others whom you trust.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
devices to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity >
Packet data > Packet data connection and from the following options:
•When needed — to set the packet data connection to established when an
application needs it. The connection will be closed when the application is
terminated.
•Always online — to set the device to automatically connect to a packet data
network when you switch the device on.
Settings
55
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 55 May 8, 2007 4:09:52 PM
You can connect the device using Bluetooth wireless technology or USB data
cable connection to a compatible PC and use the device as a modem to enable
GPRS connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access
point, and activate the access point you want to use. Select Edit active access
point > Alias for access point, enter a name to change the access point
settings, and select OK. Select Packet data access point, enter the access point
name (APN) to establish a connection to a network, and select OK.
Establish an internet connection by using your phone as a modem. See "Nokia
PC Suite," p. 87. If you have set the settings both on your PC and on your device,
the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another compatible
device (for example, a mobile device), a compatible PC, or a remote internet
server (network service).
Your device allows data transfer with a compatible PC or another compatible
device when using the device without a SIM card.
Transfer contact list
To copy or synchronize data from your device, the name of the device and the
settings must be in the list of transfer contacts. If you receive data from another
device (for example, a compatible mobile device), the corresponding transfer
contact is automatically added to the list, using the contact data from the other
device. Server sync and PC sync are the original items in the list.
To add a new transfer contact to the list (for example, a mobile device), select
Menu > Settings > Connectivity > Data transfer > Options > Add
contact > Phone sync or Phone copy, and enter the settings according to
the transfer type.
Settings
56
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 56 May 8, 2007 4:09:52 PM
To edit the copy and synchronize settings, select a contact from the transfer
contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list and
Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable connection.
The other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data
transfer and the transfer contact from the list other than Server sync or PC
sync.
According to the settings, the selected data is copied or synchronized.
Synchronize from a PC
To synchronize data from calendar, notes, and contacts, install the Nokia PC
Suite software of your device on a compatible PC. Use Bluetooth wireless
technology or a USB data cable to connect your device with the PC and start the
synchronization from the PC.
Synchronize from a server
To use a remote internet server, subscribe to a synchronization service. For
more information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
"Configuration setting service," p. 12.
To start the synchronization from your device, select Menu > Settings >
Connectivity > Data transfer > Server sync.
Synchronizing for the first time or after an interrupted synchronization may
take up to 30 minutes to complete.
Settings
57
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 57 May 8, 2007 4:09:52 PM
USB data cable
You can use the USB data cable to transfer data between the device and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data
cable. Confirm "USB data cable connected. Select mode." and select from the
following options:
•Nokia mode — to use the cable for PC Suite
•Printing & media — to use the device with a PictBridge compatible printer
or with your compatible PC
•Data storage — to connect to a PC that does not have Nokia software and
use the device as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable and the desired USB mode.
Call
Select Menu > Settings > Call and from the following options:
•Call divert — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active. See
"Security," p. 61.
•Voice clarity — Select Active to enhance speech intelligibility especially in
noisy environments.
•Anykey answer — Select On to answer an incoming call by briefly pressing
any key, except the power key, the left and right selection keys, or the end
key.
•Automatic redial — Select On to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt.
•Speed dialling — Select On to dial the names and phone numbers assigned
to the number keys 2 to 9 by pressing and holding the corresponding number
key.
Settings
58
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 58 May 8, 2007 4:09:52 PM
•Call waiting — Select Activate to have the network notify you of an
incoming call while you have a call in progress (network service). See
"Answer or reject a call," p. 25.
•Summary after call — Select On to briefly display the approximate duration
after each call.
•Send my caller ID — Select Yes to show your phone number to the person
you are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
•Line for outgoing calls — to select the phone line 1 or 2 for making calls if
supported by your SIM card (network service)
Phone
Select Menu > Settings > Phone and from the following options:
•Language settings — To set the display language of your device, select
Phone language. Automatic selects the language according to the
information on the SIM card. To select the USIM card language, select SIM
language. To set a language for the voice playback, select Voice
recognition language. See "Enhanced voice dialing," p. 25.
•Security keyguard — To set the device to ask for the security code when
you unlock the keyguard. Enter the security code, and select On.
•Automatic keyguard — to lock the keypad automatically after a preset time
delay when the device is in the standby mode and no function of the device
has been used. Select On, and set the time.
•Welcome note — to write the note that is shown when the device is
switched on
•Flight query — The device asks every time when it is switched on whether
you want to use the flight profile. With the flight profile, all radio connections
are switched off. The flight profile should be used in areas sensitive to radio
emissions.
•Phone updates — to receive software updates from your service provider
(network service). This option may not be available, depending on your
device. See "Software updates over the air," p. 62.
Settings
59
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 59 May 8, 2007 4:09:52 PM
•Operator selection — Select Automatic to set the device to automatically
select one of the cellular networks available in your area. With Manual you
can select a network that has a roaming agreement with your service
provider.
•Confirm SIM service actions — See "SIM services," p. 86.
•Help text activation — to select whether the device shows help texts
•Start-up tone — The device plays a tone when it is switched on.
Enhancements
This menu or the following options are shown only if the device is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and
depending on the enhancement, from the following options:
•Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
•Automatic answer — to set the device to answer an incoming call
automatically after 5 seconds. If Incom. call alert: is set to Beep once or
Off, automatic answer is off.
•Lights — to set the lights permanently On. Select Automatic to set the lights
on for 15 seconds after a keypress.
•Text phone — Select Use text phone > Yes to use this setting instead of
headset or loopset settings.
Configuration
You can configure your device with settings that are required for certain
services. Your service provider may also send you these settings. See
"Configuration setting service," p. 12.
Select Menu > Settings > Configuration and from the following options:
•Default configu- ration settings — to view the service providers saved in
the device. To set the configuration settings of the service provider as default
settings, select Options > Set as default.
Settings
60
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 60 May 8, 2007 4:09:52 PM
•Activate default in all applications — to activate the default configuration
settings for supported applications
•Preferred access point — to view the saved access points. Scroll to an access
point, and select Options > Details to view the name of the service
provider, data bearer, and packet data access point or GSM dial-up number.
•Connect to service provider support — to download the configuration
settings from your service provider
•Device manager settings — to allow or prevent the device from receiving
software updates. This option may not be available, depending on your
device. See "Software updates over the air," p. 62.
•Personal configu- ration settings — to manually add new personal
accounts for various services and to activate or delete them. To add a new
personal account if you have not added any, select Add new; otherwise,
select Options > Add new. Select the service type, and select and enter
each of the required parameters. The parameters differ according to the
selected service type. To delete or activate a personal account, scroll to it,
and select Options > Delete or Activate.
Security
When security features that restrict calls are in use (such as call barring, closed
user group, and fixed dialing), calls may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and from the following options:
•PIN code request and UPIN code request — to set the device to ask for
your PIN or UPIN code every time the device is switched on. Some SIM cards
do not allow the code request to be turned off.
•PIN2 code request — to select whether the PIN2 code is required when
using a specific device feature which is protected by the PIN2 code. Some
SIM cards do not allow the code request to be turned off.
•Call barring service — to restrict incoming calls to and outgoing calls from
your device (network service). A restriction password is required.
Settings
61
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 61 May 8, 2007 4:09:52 PM
•Fixed dialling — to restrict your outgoing calls to selected phone numbers
if this function is supported by your SIM card. When the fixed dialing is on,
GPRS connections are not possible except while sending text messages over
a GPRS connection. In this case, the recipient’s phone number and the
message center number must be included in the fixed dialing list.
•Closed user group — to specify a group of people whom you can call and
who can call you (network service)
•Security level — Select Phone to set the device to ask for the security code
whenever a new SIM card is inserted into the device. If you select Memory,
the device asks for the security code when the SIM card memory is selected,
and you want to change the memory in use.
•Access codes — to change the security code, PIN code, UPIN code, PIN2 code,
or restriction password
•Code in use — to select whether the PIN code or UPIN code should be active
•Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your device. See
"Certificates," p. 85.
•Security module settings — to view Security module details, activate
Module PIN request, or change the module PIN and signing PIN. See "Access
codes," p. 11.
Software updates over the air
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is completed and
the device is restarted. Be sure to back up data before accepting
installation of an update.
Your service provider may send device software updates over the air directly
to your device (network service). This option may not be available, depending
on your device.
Settings
62
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 62 May 8, 2007 4:09:52 PM
Software update settings
To allow or disallow software updates, select Menu > Settings >
Configuration > Device manager settings > Service provider software
updates and the following options:
•{No display_text mapping for 'qtn_list_allowremoteman',
locale='en'} — to perform all software downloads and updates
automatically
•{No display_text mapping for 'qtn_list_rejectremoteman',
locale='en'} — to reject all software updates
•{No display_text mapping for 'qtn_list_confirmremmanfirst',
locale='en'} — to perform software downloads and updates only after your
confirmation (default setting)
Request a software update
Select Menu > Settings > Phone > Phone updates to request available
software updates from your service provider. Select Current software
details to display the current software version and check whether an update
is needed. Select Download phone software to download and install a
software update. Follow the instructions on the display.
Install a software update
If the installation was canceled after the download, select Install software
update to start the installation.
The software update may take several minutes. If there are problems with the
installation, contact your service provider.
Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore factory sett.. Enter the security code.
The names and phone numbers saved in Contacts are not deleted.
Settings
63
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 63 May 8, 2007 4:09:52 PM
12. Operator menu
This menu lets you access a portal to services provided by your network
operator. The name and the icon depend on the operator. For more information
contact your network operator. The operator can update this menu with a
service message. See "Service inbox," p. 83.
13. Gallery
Copyright protections may prevent some images, music (including ringing
tones), and other content from being copied, modified, transferred or
forwarded.
Manage images, video clips, music files, themes, graphics, tones, recordings,
and received files. These files are stored in the device memory or an attached
memory card and may be arranged in folders.
Your device supports an activation key system to protect acquired content.
Always check the delivery terms of any content and activation key before
acquiring them, as they may be subject to a fee.
Folders and files
To see the list of folders, select Menu > Gallery.
To view the list of files in a folder, select a folder and Open.
To see the available options of a folder or a file, select a folder or a file and
Options.
To view the folders of the memory card when moving a file, scroll to the memory
card, and press the scroll key right.
Operator menu
64
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 64 May 8, 2007 4:09:52 PM
Print images
Your device supports Nokia XPressPrint to print images that are in the .jpeg
format.
To connect your device to a compatible printer, use a data cable or send the
image by Bluetooth to a printer supporting Bluetooth technology. See "PC
connectivity," p. 87.
Select the image you want to print and Options > Print.
Memory card
Warning: Keep all memory cards out of the reach of small children.
Use a memory card to store your multimedia files such as video clips, music
tracks, sound files, images, and messaging data.
Some of the folders in Gallery with content that the device uses (for example,
Themes) may be stored on the memory card.
To insert a memory card, see "Insert a microSD card", p. 15.
Format the memory card
Some supplied memory cards are preformatted; others require formatting.
Consult your retailer to find out if you must format the memory card before you
can use it. When you format a memory card, all data on the card is permanently
lost.
To format a memory card, select Menu > Gallery or Applications, the memory
card folder , and Options > Format mem. card > Yes.
When formatting is complete, enter a name for the memory card.
Lock the memory card
Set a password to lock your memory card against unauthorized use.
Gallery
65
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 65 May 8, 2007 4:09:52 PM
Select the memory card folder and Options > Set password. The
password can be up to eight characters long. The password is stored in your
device, and you do not have to enter it again while you are using the memory
card on the same device. If you want to use the memory card on another device,
you are asked for the password.
To delete the password, select Options > Delete password.
Check memory consumption
Check the memory consumption of different data groups and the available
memory to install new applications or software on your memory card.
Select the memory card and Options > Details.
14. Media
Media player
View, play, and download files, such as images, audio, video, and animated
images; or view compatible streaming videos from a network server (network
service).
Select Menu > Media > Media player > Open Gallery, Bookmarks, Go to
address, or Media downloads to select or download media.
Select Menu > Media > Media player > FF/Rew interval to set the step
width for fast forward or rewind.
Configuration for a streaming service
You may receive the configuration settings required for streaming as a
configuration message from the service provider. See "Configuration setting
service," p. 12. You can also enter the settings manually. See
"Configuration," p. 60.
To activate the settings, do the following:
Media
66
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 66 May 8, 2007 4:09:52 PM
1. Select Menu > Media > Media player > Streaming sett. >
Configuration.
2. Select a service provider, Default, or Personal config. for streaming.
3. Select Account and a streaming service account contained in the active
configuration settings.
Music player
Your device includes a music player for listening to music tracks or other MP3
or AAC sound files that you have downloaded from the web or transferred to
the device with Nokia PC Suite. See "Nokia PC Suite," p. 87.
Music files stored in the music folder in the device memory or on the memory
card are automatically detected and added to the music library during the
startup of the device.
To open the music player, select Menu > Media > Music player.
Play music tracks
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Operate the music player with the virtual keys on the display.
When you open Music player, the details of the first track on the default track
list are shown. To start playing, select .
To adjust the volume level, use the volume keys of the device.
To pause the playing, select .
To skip to the next track, select . To skip to the beginning of the previous
track, select twice.
To fast forward the current track, select and hold . To rewind the current
track, select and hold . Release the key at the position you want.
Media
67
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 67 May 8, 2007 4:09:52 PM
To stop the music player, press and hold the end key.
Music player options
In the music player menu, select from the following options:
•Show tracks — View all available tracks of the active track list and play the
desired track. To play a track, scroll to the desired track, and select Play.
•Music library — View all available tracks ordered according to Artists,
Albums, Genres, Composers, or Track lists. Select Update libr. to refresh
the lists. To find track lists generated with the Nokia Music Manager, select
Track lists > My tracks.
•Play options — Select Random to play the tracks on the track list in random
order. Select Repeat to play the current track or the entire track list
repeatedly.
•Media equaliser — to select or define an equalizer setting
•Add to Favourites — to add the current track to the favorite track list
•Play via Bluetooth — to connect and play the tracks on an audio accessory
using Bluetooth technology
•Use tone — Set the currently played music track, for example, as a ringing
tone.
•Send — to send the current track by a multimedia message or using
Bluetooth technology
•Web page — to access a web page associated with the currently played
track, which is dimmed if no web page is available.
•Music downloads — to connect to a web service
•Memory status — to view the free and used memory capacity
Voice recorder
Record speech, sound, or an active call, and save them in Gallery. This is useful
when recording a name and phone number to write down later.
Record sound
1. Select Menu > Media > Recorder. To use the graphical keys , , or
on the display, scroll left or right to the desired key, and select it.
Media
68
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 68 May 8, 2007 4:09:52 PM
2. To start the recording, select . To start the recording during a call, select
Options > Record. While recording a call, all parties to the call hear a faint
beeping. When recording a call, hold the device in the normal position near
to your ear. To pause the recording, select .
3. To end the recording, select . The recording is saved in Gallery >
Recordings.
Select from the following Options:
•Play last recorded — to listen to the latest recording
•Send last recorded — to send the last recording
•Recordings list — Select Recordings to see the list of recordings in Gallery
Equalizer
Control the sound when using the music player by amplifying or diminishing
frequency bands.
Select Menu > Media > Equaliser.
To activate a set, scroll to one of the equalizer sets, and select Activate.
To view, edit, or rename a selected set, select Options > View, Edit, or
Rename.
Not all sets can be edited or renamed.
Stereo widening
Stereo widening enhances the audio output of the device when you are using
a stereo headset by enabling a wider stereo sound effect.
To change the setting, select Menu > Media > Stereo widening.
Media
69
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 69 May 8, 2007 4:09:52 PM
15. Push to talk
Push to talk (PTT) is a two-way radio service available over a GPRS cellular
network (network service).
You can use PTT to have a conversation with one person or with a group of
people (channel) having compatible devices. While you are connected to the
PTT service, you can use the other functions of the device.
To check availability, costs, additional features and to subscribe to the service,
contact your service provider. Roaming services may be more limited than for
normal calls. This feature may not be available, depending on your phone.
Before you can use the PTT service, you must define the required PTT service
settings. See "PTT settings," p. 73. See "Configuration settings," p. 74.
PTT channels
PTT channel types
A PTT channel comprises a group of people (for example, friends or a work
team) who joined the channel after they were invited. When you call a channel,
all members joined to the channel hear the call simultaneously.
In a Public channel, every channel member can invite other persons; in a
Private channel, only the channel creator can invite others.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per channel is
limited. Contact your service provider for details.
Create a channel
To add a channel, select Menu > Push to talk > Add channel, and enter the
settings in the form fields.
Push to talk
70
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 70 May 8, 2007 4:09:52 PM
To send an invitation to the channel, select Yes. To send further invitations,
select Menu > Push to talk > Channel list, a channel, and Options > Send
invitation.
Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT
on. indicates the PTT connection. indicates that the service is temporarily
unavailable. If you have added channels to the phone, you are automatically
joined to the active channels.
To disconnect from the PTT service, select Switch PTT off.
You may assign a default function to the PTT (volume up) key to open the
channel list, the contacts list, or a single channel or contact. See "PTT
settings," p. 73.
Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple recipients, you
must hold the PTT (volume up) key as long as you talk. To listen to the response,
release the PTT (volume up) key.
Check the login status of your contacts in Menu > Push to talk > Contacts
list: - person available, - person unknown, - person does not want to
be disturbed, but can receive callback request, - person has PTT switched
off.
This service depends on your network operator and is only available for
subscribed contacts. To subscribe a contact, select Options > Subscribe
contact, or if one or more contacts are already marked, Subscribe marked.
Make a channel call
To make a call to a channel, select Channel list in the PTT menu, scroll to the
desired channel, and press and hold the PTT (volume up) key.
Push to talk
71
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 71 May 8, 2007 4:09:52 PM
Make a one-to-one call
To start a one-to-one call, select Menu > Contacts > Names, or Menu >
Push to talk > Callback inbox, Channel list, or Contacts list. Select a contact,
a member, or a nickname, and press and hold the PTT (volume up) key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT (volume up) key to start the call. The participating
contacts are shown on the display as soon as they join the call.
3. Press and hold the PTT (volume up) key to talk to them. Release the PTT
(volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call, which you can accept or reject.
When you press and hold the PTT (volume up) key while the caller is talking,
you hear a queuing tone, and Queuing is displayed. Wait for the other person
to finish; then you can talk immediately.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response, you can send a callback
request from following lists:
•Menu > Contacts > Names
•Menu > Push to talk > Callback inbox, Channel list, or Contacts list
Select a contact, a member, or a nickname and Options > Send PTT
callback.
Push to talk
72
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 72 May 8, 2007 4:09:52 PM
Respond to a callback request
When someone sends you a callback request, Callback request received is
displayed in the standby mode. To open the Callback inbox, select View. The
list of nicknames of the persons who have sent you callback requests is shown.
To make a one-to-one call, select the desired request, and press and hold the
PTT (volume up) key.
Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls
in the following ways:
•To add a PTT address to a name in Contacts, search for the desired contact,
and select Details > Options > Add detail > PTT address. A contact
appears in the PTT contact list only if you enter a PTT address.
•To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
•To add a contact from the channel list, connect to the PTT service, select
Channel list, and scroll to the desired channel. Select Members, scroll to the
member whose contact information you want to save, and select Options.
•To add a new contact, select Save as. To add a PTT address to a name in
Contacts, select Add to contact.
PTT settings
Select Menu > Push to talk > PTT settings and from the following options:
•1 to 1 calls — Select On to allow the reception of incoming one-to-one calls.
To set the device to first notify you of incoming one-to-one calls with a
ringing tone, select Notify.
•PTT key default function — to set the PTT (volume up) key to one of the
following functions: Open contact list, Open channel list, or Call contact/
group. Select a contact, a group, or Call PTT channel; and select a channel.
When you press and hold the PTT (volume up) key, the selected function is
performed.
Push to talk
73
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 73 May 8, 2007 4:09:52 PM
•Show my login status — to enable or disable the sending of the login status
•PTT status in startup — Select Yes or Ask first to automatically connect to
the PTT service when you switch the device on.
•Push to talk when abroad — to switch the PTT service on or off when the
device is used outside of the home network
•Send my PTT address — Select No to hide your PTT address from channel
and one-to-one calls.
Configuration settings
You may receive the settings for connecting to the service from your service
provider. See "Configuration setting service," p. 12. You can also enter the
settings manually. See "Configuration," p. 60.
To select the settings for connecting to the service, select Menu > Push to
talk > Config. settings.
16. Applications
You can manage applications and games. These files are stored in the device
memory or an attached memory card and may be arranged in folders.
You can format, lock, and unlock the memory card. See "Memory card," p. 65.
Launch a game
Your device software may include some games.
Select Menu > Applications > Games. Scroll to the desired game, and select
Open.
To set sounds, lights, and shakes for the game, select Menu > Applications >
Options > App. settings. You can select more options. See "Application
options," p. 75.
Applications
74
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 74 May 8, 2007 4:09:52 PM
Launch an application
Your device software may include some Java applications.
Select Menu > Applications > Collection. Scroll to an application, and select
Open.
Application options
•Update version — to verify that a new version of the application is available
for download from the web (network service)
•Web page — to provide further information or additional data for the
application from an internet page (network service), if available
•App. access — to restrict the application from accessing the network
Download an application
Your device supports J2ME Java applications. Ensure that the application is
compatible with your device before downloading it.
Important: Only install and use applications and other software from
trusted sources, such as applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
You can download new Java applications and games in different ways.
•Select Menu > Applications > Options > Downloads > App.
downloads; the list of available bookmarks is shown. See
"Bookmarks," p. 81.
•Use the Nokia Application Installer from PC Suite to download the
applications to your device.
For the availability of different services, pricing, and tariffs, contact your service
provider.
Your device may have some bookmarks or links preinstalled for or may allow
access to sites provided by third parties not affiliated with Nokia. Nokia does
not endorse or assume any liability for these sites. If you choose to access them,
Applications
75
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 75 May 8, 2007 4:09:52 PM
you should take the same precautions, for security or content, as you would
with any internet site.
17. Organizer
Alarm clock
To set the device to sound an alarm at a desired time, select Menu >
Organiser > Alarm clock.
Set the alarm
To set the alarm, select Alarm time, and enter the alarm time.
To change the alarm time when the alarm time is set, select On.
To set the device to alert you on selected days of the week, select Repeat
alarm.
To select the alarm tone, select Alarm tone.
To set a snooze time-out, select Snooze time-out and the time.
Stop the alarm
When the alarm time is reached, the device sounds an alert tone and flashes
Alarm! and the current time on the display, even if the device is switched off.
To stop the alarm, select Stop. If you let the device continue to sound the alarm
for a minute or select Snooze, the alarm stops for the time you set in Snooze
time-out, then resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless device
use may cause interference or danger.
Organizer
76
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 76 May 8, 2007 4:09:52 PM
Calendar
Select Menu > Organiser > Calendar.
The current day has a frame around the number. If there are any notes set for
the day, the day is in bold type. To view the day notes, select View. To view a
week, select Options > Week view. To delete all notes in the calendar, select
the month or week view, and Options > Delete all notes.
In Settings you can set the date, time, time zone, date or time format, date
separator, default view, or the first day of the week. In Auto-delete notes you
can set the device to delete old notes automatically after a specified time.
Make a calendar note
Select Menu > Organiser > Calendar.
Scroll to the date, and select Options > Make a note and one of the following
note types: Meeting, Call , Birthday, Memo, or Reminder.
Fill in the fields.
Note alarm
The device displays the note, and, if an alarm is set, sounds a tone. If a call note
is displayed, press the call key to make the call.
To stop the alarm and to view the note, select View. To stop the alarm for 10
minutes, select Snooze. To stop the alarm without viewing the note, select
Exit.
To-do list
Save a note for a task that you must do.
Select Menu > Organiser > To-do list. To make a note if no note is added,
select Add note; otherwise, select Options > Add. Fill in the fields, and select
Save.
Organizer
77
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 77 May 8, 2007 4:09:52 PM
To view a note, scroll to it, and select View. While viewing a note, you can also
select an option to edit the attributes. You can also select an option to delete
the selected note and delete all the notes that you have marked as done.
Notes
To write and send notes, select Menu > Organiser > Notes.
To make a note if no note is added, select Add note; otherwise, select
Options > Make a note. Write the note, and select Save.
Calculator
The calculator in your device provides basic arithmetic and trigonometric
functions, calculates the square and the square root, the inverse of a number,
and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Calculations - Select Menu > Organiser > Calculator. When 0 is displayed
on the screen, enter the first number in the calculation. Press # for a decimal
point. Scroll to the desired operation or function, or select it from the
Options. Enter the second number. Repeat this sequence as many times as it
is necessary.
Currency conversion - To perform a currency conversion select Options >
Exchange rate. Select either of the displayed options. Enter the exchange rate,
press # for a decimal point, and select OK. The exchange rate remains in the
memory until you replace it with another one. To perform the currency
conversion, enter the amount to be converted, and select Options > In
domestic or In foreign.
Note: When you change the base currency, you must enter new
exchange rates because all previously set exchange rates are cleared.
Organizer
78
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 78 May 8, 2007 4:09:52 PM
Timers
Countdown timer
1. To activate the countdown timer, select Menu > Organiser > Timer >
Normal timer, enter the alarm time, and write a note that is displayed when
the time expires. To change the countdown time, select Change time.
2. To start the timer, select Start.
3. To stop the timer, select Stop timer.
Interval timer
1. To have an interval timer with up to 10 intervals started, first enter the
intervals.
2. Select Menu > Organiser > Timer > Interval timer.
3. To start the timer, select Start timer > Start.
Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the device can be used.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organiser > Stopwatch and from the following options:
•Split timing — to take intermediate times. To start the time observation,
select Start. Select Split every time that you want to take an intermediate
time. To stop the time observation, select Stop. To save the measured time,
select Save. To start the time observation again, select Options > Start. The
new time is added to the previous time. To reset the time without saving it,
select Reset.
•Lap timing — to take lap times
•Continue — to view the timing that you have set in the background
•Show last — to view the most recently measured time if the stopwatch is
not reset
•View times or Delete times — to view or delete the saved times
Organizer
79
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 79 May 8, 2007 4:09:52 PM
To set the stopwatch timing in the background, press the end key.
18. Web
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
With your device browser, access various mobile internet services that use
wireless markup language (WML) or extensible hypertext markup language
(XHTML) on their pages. Appearance may vary due to screen size. You may not
be able to view all details of the internet pages.
Check the availability of these services, pricing, tariffs, and instructions with
your service provider.
Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from the service provider that offers the service that
you want to use. See "Configuration setting service," p. 12.
You can also enter all the configuration settings manually. See
"Configuration," p. 60.
Connect to a service
Ensure that the correct configuration settings of the service are activated.
1. To select the settings for connecting to the service, select Menu > Web >
Settings > Configuration settings.
2. Select Configuration. Only the configurations that support browsing
service are shown. Select a service provider, Default, or Personal config.
for browsing. See "Set up browsing," p. 80.
3. Select Account and a browsing service account contained in the active
configuration settings.
Web
80
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 80 May 8, 2007 4:09:52 PM
4. Select Display terminal window > Yes to perform manual user
authentication for intranet connections.
Make a connection to the service in one of the following ways: Select Menu >
Web > Home; or in the standby mode, press and hold 0.
To select a bookmark of the service, select Menu > Web > Bookmarks.
To select the last URL, select Menu > Web > Last web address.
To enter the address of the service, select Menu > Web > Go to address.
Enter the address of the service, and select OK.
Browse pages
After you make a connection to the service, you can start browsing its pages.
The function of the device keys may vary in different services. Follow the text
guides on the device display. For more information, contact your service
provider.
Browse with phone keys
To browse through the page, scroll in any direction.
To select an item, press the call key or Select.
To enter letters and numbers, press 0 to 9.
To enter special characters, press *.
Direct calling
While browsing, you can make a phone call and save a name and a phone
number from a page.
Bookmarks
You can save page addresses as bookmarks in the device memory.
1. While browsing, select Options > Bookmarks; or in the standby mode,
select Menu > Web > Bookmarks.
Web
81
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 81 May 8, 2007 4:09:52 PM
2. Select a bookmark, or press the call key to connect to the page.
3. Select Options to create and manage bookmarks.
Your device may have some bookmarks or links preinstalled for or may allow
access to sites provided by third parties not affiliated with Nokia. Nokia does
not endorse or assume any liability for these sites. If you choose to access them,
you should take the same precautions, for security or content, as you would
with any internet site.
When you receive a bookmark, 1 bookmark received is displayed. To view the
bookmark, select Show.
Appearance settings
While browsing, select Options > Other options > Appear. settings; or in
the standby mode, select Menu > Web > Settings > Appearance
settings and from the following options:
•Text wrapping — to select how the text is displayed
•Font size — to set the font size
•Show images — Select No to hide images on the page.
•Alerts — Select Alert for unsecure connection > Yes to set the device to
alert you when a secure connection changes to an unsecure connection while
browsing.
•Alerts — Select Alert for unsecure items > Yes to set the device to alert
when a secure page contains an unsecure item. These alerts do not
guarantee a secure connection. See "Browser security," p. 85.
•Character encoding — Select Content encoding to set the encoding for
the browser page content.
•Character encoding — Select Unicode (UTF-8) web addresses > On to
set the device to send a URL as UTF-8 encoding.
•Screen size — to set the screen layout to Full or Small
•JavaScript — to enable the Java scripts
Web
82
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 82 May 8, 2007 4:09:52 PM
Security settings
Cookies
A cookie is data that a site saves in the cache memory of your device. Cookies
are saved until you clear the cache memory. See "Cache memory," p. 84.
While browsing, select Options > Other options > Security > Cookie
settings; or in the standby mode, select Menu > Web > Settings > Security
settings > Cookies.
To allow or prevent the device from receiving cookies, select Allow or Reject.
Scripts over secure connection
You can select whether to run scripts from a secure page. The device supports
WML scripts.
While browsing, to allow the scripts, select Options > Other options >
Security > WMLScript sett.; or in the standby mode, select Menu > Web >
Settings > Security settings > WMLScripts over secure connection >
Allow.
Download settings
To automatically save all downloaded files in Gallery, select Menu > Web >
Settings > Downloading settings > Automatic saving > On.
Service inbox
The device is able to receive service messages sent by your service provider
(network service). Service messages are notifications (for example, news
headlines) that may contain a text message or an address of a service.
Service inbox access
Select Show to access the Service inbox when you receive a service message.
Web
83
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 83 May 8, 2007 4:09:52 PM
If you select Exit, the message is moved to the Service inbox.
To access the Service inbox later, select Menu > Web > Service inbox. To
access the Service inbox while browsing, select Options > Other options >
Service inbox. Scroll to the message you want, and select Retrieve to activate
the browser and download the complete message.
To display detailed information on the service notification or delete the
message, select Options > Details or Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox settings and from the
following options:
•Service messages — to set whether you want to receive service messages
•Message filter — Select On to set the device to receive service messages
only from content authors approved by the service provider. To view the list
of the approved content authors, select Trusted channels.
•Automatic connection — Select On to set the device to automatically
activate the browser from the standby mode, when the device has received
a service message. If you select Off, the device activates the browser only
after you select Retrieve when the device has received a service message.
Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache.
To clear the cache while browsing, select Options > Other options > Clear
the cache.
In the standby mode, select Menu > Web > Clear the cache.
Web
84
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 84 May 8, 2007 4:09:52 PM
Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections you need security certificates and possibly a
security module, which may be available on your SIM card. For more
information, contact your service provider.
Security module
The security module improves security services for applications requiring a
browser connection and allows you to use a digital signature. The security
module may contain certificates as well as private and public keys. The
certificates are saved in the security module by the service provider.
To view or change the security module settings, select Menu > Settings >
Security > Security module settings.
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted
certificates for increased security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is
shown even if the certificate should be valid, check that the current date
and time in your device are correct.
There are three kinds of certificates: server certificates, authority certificates,
and user certificates. You may receive these certificates from your service
provider. Authority certificates and user certificates may also be saved in the
security module by your service provider.
To view the list of the authority or user certificates downloaded to your phone,
select Menu > Settings > Security > Authority certificates or User
certificates.
Web
85
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 85 May 8, 2007 4:09:52 PM
is displayed during a connection if the data transmission between the
phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is
stored) is secure. The service provider secures the data transmission between
the gateway and the content server.
Digital signature
You can create digital signatures with your phone if your SIM card has a security
module. The digital signature is the same as signing your name to a paper bill,
contract, or other document.
To create a digital signature, select a link on a page (for example, the title of
the book you want to buy and its price). The text to be signed is shown and
may include the amount and date.
Check that the header text is Read and that the digital signature icon is
shown. If the digital signature icon does not appear, there is a security breach;
do not enter any personal data (such as your signing PIN).
To sign the text, read all of the text first, and select Sign. The text may not fit
within a single screen. Therefore, make sure to scroll through and read all of
the text before signing.
Select the user certificate you want to use, and enter the signing PIN. The digital
signature icon disappears, and the service may display a confirmation of your
purchase.
19. SIM services
Your SIM card may provide additional services. You can access this menu only
if it is supported by your SIM card. The name and contents of the menu depend
on the available services.
SIM services
86
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 86 May 8, 2007 4:09:52 PM
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider or other vendor.
To set the phone to show you the confirmation messages sent between your
phone and the network when you are using the SIM services, select Menu >
Settings > Phone > Confirm SIM service actions > Yes.
Accessing these services may involve sending messages or making a phone call
for which you may be charged.
20. PC connectivity
Send and receive e-mail, and access the internet when your device is connected
to a compatible PC through a Bluetooth, an infrared, or a data cable connection.
Use your device with a variety of PC connectivity and data communications
applications.
Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do
notes between your device and the compatible PC or a remote internet server
(network service). You may find more information and PC Suite on the Nokia
website. See "Nokia support," p. 13.
Packet data, HSCSD, and CSD
With your phone, you can use the packet data, high-speed circuit switched data
(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability
and subscription to data services, contact your service provider.
The use of HSCSD services consumes the battery faster than normal voice or
data calls.
PC connectivity
87
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 87 May 8, 2007 4:09:52 PM
Bluetooth
Use Bluetooth technology to connect your compatible laptop to the internet.
Your phone must have activated a service provider that supports internet
access, and your PC has to support Bluetooth PAN (personal area network). After
connecting to the network access point (NAP) service of the phone and pairing
with your PC, your phone automatically opens a packet data connection to the
internet. PC Suite software installation is not necessary when using the NAP
service of the phone. See "Bluetooth wireless technology," p. 54.
Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended as it might disrupt the operation.
For better performance during data calls, place the device on a stationary
surface with the keypad facing downward. Do not move the device during a
data call. For example, do not hold the device during a data call.
21. Battery
Battery information
Your device is powered by a rechargeable battery. The battery can be charged
and discharged hundreds of times, but it will eventually wear out. When the
talk and standby times are noticeably shorter than normal, replace the battery.
Use only Nokia approved batteries, and recharge your battery only with Nokia
approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger,
then disconnect and reconnect it to begin charging the battery.
Battery
88
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 88 May 8, 2007 4:09:52 PM
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged battery will lose its charge
over time.
If the battery is completely discharged, it may take several minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal
strips on the battery.) This might happen, for example, when you carry a spare
battery in your pocket or purse. Short-circuiting the terminals may damage the
battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always
try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with
a hot or cold battery may not work temporarily, even when the battery is fully
charged. Battery performance is particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do
not allow the liquid to come in contact with the skin or eyes. In the event of
such a leak, flush your skin or eyes immediately with water, or seek medical
help.
Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
Battery
89
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 89 May 8, 2007 4:09:52 PM
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery
is not an authentic, original Nokia battery, you should refrain from using it, and
take it to the nearest authorized Nokia service point or dealer for assistance.
Your authorized Nokia service point or dealer will inspect the battery for
authenticity. If authenticity cannot be verified, return the battery to the place
of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you should
see the Nokia connecting hands symbol from one angle
and the Nokia Original Enhancements logo when looking
from another angle.
2. When you angle the hologram left, right, down, and up,
you should see 1, 2, 3, and 4 dots on each side
respectively.
3. Scratch the side of the label to reveal a 20-digit code, for
example, 12345678919876543210. Turn the battery so
that the numbers are facing upwards. The 20-digit code
reads starting from the number at the top row followed
by the bottom row.
4. Confirm that the 20-digit code is valid by following the instructions at
www.nokia.com/batterycheck.
Battery
90
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 90 May 8, 2007 4:09:52 PM
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label
is an authentic Nokia battery, please do not use the battery. Take it to the
nearest authorized Nokia service point or dealer for assistance. The use of a
battery that is not approved by the manufacturer may be dangerous and may
result in poor performance and damage to your device and its enhancements.
It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/
battery.
Battery
91
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 91 May 8, 2007 4:09:52 PM
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The following suggestions will help you protect your
warranty coverage.
•Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery, and allow the device to dry
completely before replacing it.
•Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
•Do not store the device in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
•Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•Do not attempt to open the device other than as instructed in this guide.
•Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
•Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
•Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity
sensor, and light sensor lenses.
•Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•Use chargers indoors.
92
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 92 May 8, 2007 4:09:52 PM
•Always create a backup of data you want to keep, such as contacts and
calendar notes.
•To reset the device from time to time for optimum performance, power off
the device and remove the battery.
These suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or
packaging reminds you that in the European Union all electrical and
electronic products, batteries, and accumulators must be taken to
separate collection at the end of their working life. Do not dispose of these
products as unsorted municipal waste.
Return the products to collection to prevent possible harm to the environment
or human health from uncontrolled waste disposal and to promote the
sustainable reuse of material resources. Collection information is available from
the product retailer, local waste authorities, national producer responsibility
organizations, or your local Nokia representative. For more information, see
product Eco-Declaration or country-specific information at www.nokia.com.
Additional safety information
Small children
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Operating environment
This device meets RF exposure guidelines when used either in the normal use
position against the ear or when positioned at least 2.2 centimeters (7/8 inches)
Additional safety information
93
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 93 May 8, 2007 4:09:52 PM
away from the body. When a carry case, belt clip, or holder is used for body-
worn operation, it should not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including wireless phones,
may interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimeters (6 inches) should be maintained between a wireless device
and an implanted medical device, such as a pacemaker or implanted
cardioverter defibrillator, to avoid potential interference with the medical
device. Persons who have such devices should:
•Always keep the wireless device more than 15.3 centimeters (6 inches) from
the medical device when the wireless device is turned on.
•Not carry the wireless device in a breast pocket.
•Hold the wireless device to the ear opposite the medical device to minimize
the potential for interference.
Additional safety information
94
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 94 May 8, 2007 4:09:52 PM
•Turn the wireless device off immediately if there is any reason to suspect
that interference is taking place.
•Read and follow the directions from the manufacturer of their implanted
medical device.
If you have any questions about using your wireless device with an implanted
medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air
bag systems. For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been added.
Only qualified personnel should service the device or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may
be dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
Additional safety information
95
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 95 May 8, 2007 4:09:52 PM
Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere, and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe restrictions on the use of
radio equipment in fuel depots, storage, and distribution areas; chemical
plants; or where blasting operations are in progress. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage facilities, vehicles using
liquefied petroleum gas (such as propane or butane), and areas where the air
contains chemicals or particles such as grain, dust, or metal powders.
Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready
the device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
Additional safety information
96
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 96 May 8, 2007 4:09:52 PM
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider for
more information.
When making an emergency call, give all the necessary information as
accurately as possible. Your wireless device may be the only means of
communication at the scene of an accident. Do not end the call until given
permission to do so.
CERTIFICATION INFORMATION (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement
known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
The actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.96 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
Additional safety information
97
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 97 May 8, 2007 4:09:52 PM
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.13 W/kg and when properly worn
on the body is 0.38 W/kg.
Additional safety information
98
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 98 May 8, 2007 4:09:52 PM
Index
Symbols/Numerics
1-touch dialing 48, 58
A
access codes 11
active standby 21, 51
alarm clock 76
antenna 17
anykey answer 58
applications 74, 75
audio messaging 33
automatic redial 58
B
background image 51
battery 88
charging 16
battery charge status 20
blacklist 37
Bluetooth 54, 55, 87, 88
bookmarks 81
browser 80
appearance settings 82
bookmarks 81
browse pages 81
cache 84
certificates 85
cookies 83
digital signature 86
security 85
WML scripts 83
C
cache memory 84
calculator 78
calendar 77
note 77
call forward 58
call functions 24
call key 18
call log 49
call waiting 25, 59
caller id 59
calls
answer 25
dialed 49
international 24
making of 24
missed 49
options 25
received 49
reject 25
voice dialing 25
capitals 26
case
lower 26
upper 26
certificates 85
channel types 70
characters 26
charge the battery 16
clock 52
codes 11
99
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 99 May 8, 2007 4:09:52 PM
configuration 60
configuration setting service 12
connectivity 87
contact information 13
contacts 44
1-touch dialing 48
business cards 47
copy 46
delete 47
dialing shortcuts 48
edit details 47
groups 46
info numbers 48
move 46
my numbers 48
save details 45
save names 45
save phone numbers 45
search 46
service numbers 48
settings 45
synchronize 47
cookies 83
countdown timer 79
CSD 87
currency conversion 78
customer service 13
D
data
communication 88
transfer 56
data cable 58, 87
date settings 52
dialing 24
dialing shortcuts 24, 48
digital signature 86
display 20, 51
downloads 12, 83
E
e-mail application 34
earpiece 18
edit text 26
end key 18
ending a call 24
enhancements 60
equalizer 69
exchange rate 78
F
factory settings 63
flash messages 32
flight mode 22
flight query 59
See also
flight mode
font size 51
G
gallery 64
files 64
folders 64
games 74
H
handsfree
See
loudspeaker
headphones 17
headset 17
Index
100
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 100 May 8, 2007 4:09:52 PM
help text 60
HSCSD 87
I
idle mode 19
indicators 21
info messages 41
info numbers 48
installation 14
instant messaging 37
internet 80
interval timer 79
J
junk folder 37
K
keyguard 23, 59
keypad 18
keypad lock 23
keys 18
call key 18
end key 18
keyguard 23
keypad 18
keypad lock 23
power 18
scroll key 18
selection keys 18
L
language 59
voice playback 59
location information 49
log 49
loudspeaker 18, 25
M
media player 66
memory card 65
insert 15
memory full 33
menu 27
message center number 29
message sending 31
messages
audio messaging 33
delete 41
flash messages 32
folders 34
info messages 41
postcard 32
service commands 41
settings 42
SIM messages 42
text 28
voice messages 41
microphone 18
microSD card
insert 15
MMS
See
multimedia messages
multimedia messages 29
music player 67
my numbers 48
N
navigation 27
navigation key
Index
101
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 101 May 8, 2007 4:09:52 PM
See
scroll key
Nokia contact information 13
note 77
notes 78
number dialing 24
number mode 26
O
offline mode 23
operator menu 64
organizer 76
P
packet data 87
parts 18
PC connectivity 87
PC Suite 87
phone software updates 59
phonebook
See
contacts
phonelock
See
keypad lock
PictBridge 58
PIN codes 11
positioning 49
postcards 32
power key 18
power saver 51
power saving 20
predictive text input 27
print images 65
profiles 50
PTT
See
push to talk
PUK codes 11
push to talk 70
settings 74
pushed messages 83
R
recorder 68
redial 58
restriction password 11
S
screen 51
screen saver 51
scroll key 18
scrolling 27
security
browser 85
certificates 85
codes 11
module 85
security code 11
selection keys 18
service
inbox 83
messages 83
service commands 41
service numbers 48
services 80
SIM 86
settings 50
active standby 51
Bluetooth 54
browser appearance 82
call 58
Index
102
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 102 May 8, 2007 4:09:52 PM
clock 52
configuration 60
data transfer 56
date 52
display 51
downloads 83
enhancements 60
font size 51
messages 42
phone 59
power saver 51
profiles 50
push to talk 73, 74
restoring 63
screen saver 51
security 61
service inbox 84
shortcuts 52
sleep mode 51
standby mode 52
themes 50
time 52
time zone 52
tones 51
USB data cable 58
wallpaper 51
shortcuts 21, 52
left selection key 52
right selection key 52
scroll key 53
voice commands 53
signal strength 20
SIM
messages 42
services 86
SIM card 23
installation 14
sleep mode 51
SMS
See
text message
software update 12, 62, 63
requesting 63
spam filter 37
standby mode 19, 52
start up tone 60
status indicators 20
stereo widening 69
stopwatch 79
strap 17
streaming service 66
synchronization 56
T
text 26
text message 28
text modes 26
themes 50
time settings 52
time zone 52
timer 79
to-do list 77
tones 51
traditional text input 27
U
unlock keypad 23
USB connector 18
USB data cable 58
Index
103
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 103 May 8, 2007 4:09:52 PM
V
voice clarity 58
voice commands 53
voice dailing 25
voice messages 41
voice recorder 68
volume key 18
W
wallpaper 51
web 80
welcome note 59
wireless markup language 80
WML scripts 83
write text 26
X
XHTML 80
Index
104
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1CEEB162-7A20-44BD-B810-5A0A723017F0.20070508154818636.en1178629717662/en/1/GUID-99309606-A5AF-4368-A45B-
BF2275776152.xml Page 104 May 8, 2007 4:09:52 PM