Microsoft RM-347 Dual-Band CDMA/ EV-DO Phone with Bluetooth User Manual 6205 ENv3 9204913

Microsoft Mobile Oy Dual-Band CDMA/ EV-DO Phone with Bluetooth 6205 ENv3 9204913

UserManual.wiki >

RM-347 User Manual >

Contents

Manual 3

SETTINGS & TOOLS63■Sounds SettingsTo adjust volumes and to assign sounds to phone calls and alarms, select MENU > SETTINGS & TOOLS > Sounds Settings and from the following options:Call Sounds — to set ringtones for incoming calls, select Call Ringtone, select the desired ringtone > OK. To set the phone to vibrate when a call is received, select Call Vibrate > On.Alert Sounds — select the alert type (Tone, Vibrate, or Reminder) for an incoming TXT Message, Pic-Video Message, or Voicemail. Select Emergency Tone to set the alert type (Alert, Vibrate, or Off) for emergency dialing.Keypad Volume — to set the volume for the keypad, press the Directional key Up or Down (this option only works when the master volume is not set to All Sounds Off, Alarm Only, or Vibrate Only by pressing the Volume keys, see "Phone at a Glance," p. 11).Service Alerts — set any of the alert options to On or Off.•ERI — Enhanced Roaming Indicator (ERI) alerts you to the status of cellular service. The ERI banner text displays “Verizon Network,” “Extended Network,” or “Roaming”. See "Banner," p. 64. This is a network service.•Minute Beep — to sound an alert every minute while on a call.•Call Connect — to alert you when a call is connected.Power On/Off — to enable or disable tones when your phone is turned on or off (this option only works when the master volume is not set to All Sounds Off, Alarm Only, or Vibrate Only by pressing the Volume keys, see "Phone at a Glance," p. 11).■Display SettingsTo modify the look and feel of the phone display, select MENU > SETTINGS & TOOLS > Display Settings.6205_ENv3_9204913.fm Page 63 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS64BannerTo display a text banner on the Standby Mode screen, select MENU > SETTINGS & TOOLS > Display Settings > Banner and you may select from the following banners:Personal Banner — enter your own banner text of up to 18 characters. To change the text color, select Color.ERI Banner — display ERI text over your personal banner, alerting you to the current cellular status. This is a network service.BacklightTo conserve battery life, you can set the phone backlighting to dim when idle. To set the backlight duration, select MENU > SETTINGS & TOOLS > Display Settings > Backlight and you may select from the following options:Display — to set how long the main display backlight remains on before dimming (7, 15, or 30 seconds, Always On or Always Off).Keypad — to set how long the keypad backlight remains on before dimming (7, 15, or 30 seconds, Always On or Always Off).ContrastTo set the contrast of the front display, select MENU > SETTINGS & TOOLS > Display Settings > Contrast. Select from one of the five contrast levels.WallpaperTo set your phone to display a background picture (wallpaper), select MENU > SETTINGS & TOOLS > Display Settings > Wallpaper.To set the main or front display wallpaper, select My Pictures or My Videos > Main Screen or Front Screen > select an image or a video > OK.To preview an image, select My Pictures > Main Screen or Front Screen > an image > View. To browse for new wallpaper, select Get New.To play a video, select My Videos > Main Screen or Front Screen > a video > Play.6205_ENv3_9204913.fm Page 64 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS65Display ThemesTo choose the color theme of the background screen, select MENU > SETTINGS & TOOLS > Display Settings > Display Themes, select the desired theme from the available options, and SET. Select Preview to view the highlighted theme.Menu SettingsTo set the layout of the menu screen, select MENU > SETTINGS & TOOLS > Display Settings > Menu Settings > Tab or List. Select Preview to view the highlighted layout. To choose the menu type, select List > OK > Personalizing or Productivity. These two types offer you more choices in menu screen. The choices are default settings and cannot be changed.Dial FontsTo set the font size of the characters displayed on the screen when entering a phone number, select MENU > SETTINGS & TOOLS > Display Settings > Dial Fonts > Normal or Large.Clock FormatTo set the clock format on your phone’s main display or front display, select MENU > SETTINGS & TOOLS > Display Settings > Clock Format > Main Clock > select the desired clock format, or Front Clock > Digital, Analog, or Off.■Phone SettingsThe Phone Settings menu allows you to designate specific network settings and operational modes for your phone.Standalone ModeThe Standalone Mode disables your phone from receiving radio frequencies. Functions on your telephone that do not require network service can still be used. To activate Standalone Mode, select MENU > SETTINGS & TOOLS > Phone Settings > Standalone Mode > On.6205_ENv3_9204913.fm Page 65 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS66Set ShortcutsShortcuts features allow you to quickly access some functions that are available when you press the Directional key Right while in Standby Mode.Press the Directional key Right shortcut is assigned to the My Shortcuts menu. This shortcut cannot be modified. For the default setting, see "My shortcuts," p. 16.To modify and assign shortcuts to My Shortcuts:1. Select MENU > SETTINGS & TOOLS > Phone Settings > Set Shortcuts > Set My Shortcuts.2. Select Shortcut 1, Shortcut 2, Shortcut 3, or Shortcut 4, and SET. Select the application you want > OK.3. To reset the assigned shortcut to the default setting, highlight the shortcut key you want, and select Options > OK.To reset all of the assigned shortcuts to the default setting, select Options > Reset My Shortcuts > OK.Set Directional KeysTo set applications and shortcuts to your Directional key when pressing Up, Left or Down, do the following:1. Select MENU > SETTINGS & TOOLS > Phone Settings > Set Shortcuts > Set Directional Keys.2. Select the key you want to assign the application to > SET. Select the application you want > OK.3. To reset all Directional keys to the default setting, select Options > Reset Directional Keys > OK.To reset the selected Directional key to the default setting, highlight the key you want and select Options > OK.6205_ENv3_9204913.fm Page 66 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS67Voice SettingsTo change the settings for voice commands, select MENU > SETTINGS & TOOLS > Phone Settings > Voice Settings, and you may select from the available options (Choice Lists, Sensitivity, Digit Dialing, Sound, or About). For details on the voice command settings, see "Voice Commands Settings," p. 74.LanguageTo set the default language of your phone menu and displays, select MENU > SETTINGS & TOOLS > Phone Settings > Language > English or Español.LocationTo share position information over the network, select MENU > SETTINGS & TOOLS > Phone Settings > Location. Select Location On to make position information continually available, or select E911 Only to make this information available for emergency services only.For calls to emergency numbers, location information may be used by the emergency operator to determine the position of the phone. The functionality and accuracy of this feature are dependent on the network, satellite systems, and the agency receiving the information. This feature may not function in all areas or at all times.SecurityTo secure the phone electronically, select MENU > SETTINGS & TOOLS > Phone Settings > Security. This feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. Enter your lock code, which is by default the last four digits of your phone number, and select from the following options:Edit Codes — to change the security code.Restrictions — to prevent the following functions from being used.•Location Setting — if set to Lock Setting, you need to enter the security code to access Location. See "Location," p. 67.6205_ENv3_9204913.fm Page 67 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS68•Calls — to set restriction type (Allow All, Contacts Only, or Block All) for incoming or outgoing calls.•Messages — to set restriction type (Allow All or Block All) for incoming or outgoing messages.•Dial-Up Modem — to enable or disable the dial-up modem function.Phone Lock Setting — if set to On Power Up, when your phone is turned on, only emergency call, answering incoming calls, and functions of viewing personal information under ICE Contacts List are available. Or select Unlocked to disable this setting.Lock Phone Now — to lock the phone with security code. When the phone is locked, you must enter your lock code to use the phone again.Restore Phone — to reset phone settings to factory defaults.System SelectTo set your phone to roam or search for another network when you are not in your home area, select MENU > SETTINGS & TOOLS > Phone Settings > System Select and one of the following options:Home Only — make and receive calls in your home area only.Automatic — search for service in another network. The roaming rate applies when you are not in the home service area.NAM SelectionIf your phone is registered with two phone numbers using number assignment modules (NAM) (for example, work and personal numbers), you can choose which number to use as your origination number. Select MENU > SETTINGS & TOOLS > Phone Settings > NAM Selection. To have your phone automatically switch to the proper NAM, select Auto NAM > On. To manually choose the origination number, select Change NAM.6205_ENv3_9204913.fm Page 68 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS69■Call SettingsTo designate how your phone handles incoming and outgoing calls, select MENU > SETTINGS & TOOLS > Call Settings.Answer OptionsTo determine how calls may be answered on your phone, select MENU > SETTINGS & TOOLS > Call Settings > Answer Options and one of the following:Flip Open — answer the call by opening the flip.Any Key — answer the call by pressing any key on the keypad.Auto With Handsfree — answer the call automatically in about 5 seconds. Auto With Handsfree mode is not activated except when a headset or hands-free car kit is attached to the phone.Auto RetryTo set the phone to automatically redial a number when the attempted call fails, select MENU > SETTINGS & TOOLS > Call Settings > Auto Retry > On or Off. Occasionally, your network may experience heavy traffic resulting in a fast busy signal when you dial. With automatic retry activated, your phone redials the number (the number of times is specified by the network) and notifies you once the network is available.TTY ModeA phone with TTY/TDD (teletype/telecommunication device for the deaf) support is able to translate typed characters to voice. Voice can also be translated into characters and displayed on the TTY. To attach a TTY, enabling you to communicate with parties also using a TTY device, select MENU > SETTINGS & TOOLS > Call Settings > TTY Mode and you may select from one of the following:TTY Full — turn on full TTY capability.TTY + Talk — turn on TTY in voice carry-over (VCO) mode.6205_ENv3_9204913.fm Page 69 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS70TTY + Hear — turn on TTY in hearing carry-over (HCO) mode.TTY Off — turn off TTY mode.One Touch DialTo initiate a speed dial call by entering the speed dial digits, select MENU > SETTINGS & TOOLS > Call Settings > One Touch Dial > On or Off. If set to Off, long press on the speed dial numbers designated in your Contact List will not function. Otherwise, you need to first press the speed dial numbers and press the Send key . See "Speed Dials," p. 52.Voice PrivacyTo set the voice privacy feature for CDMA calls, select MENU > SETTINGS & TOOLS > Call Settings > Voice Privacy > On or Off. The voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on the same network. CDMA offers inherent voice privacy that protects the identity of users and makes interception very difficult. This is a network service.DTMF TonesDual Tone Multi-Frequency (DTMF) tones or touch tones are the tones that sound when you press the keys on your phone keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voicemail box number and password. To set the key tone length, select MENU > SETTINGS & TOOLS > Call Settings > DTMF Tones. Select Normal to send out a tone for a fixed period of time no matter how long you press the key, or select Long to send out a continuous tone for as long as you keep the key pressed.■Calendar PreviewWhen an event is added on the current date, to view the event information in the Standby Mode, select MENU > SETTINGS & TOOLS > Calendar Preview > Main Screen > On. If Off is selected, is displayed in the Standby Mode.6205_ENv3_9204913.fm Page 70 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS71To set the font size of the event in the Standby Mode, select MENU > SETTINGS & TOOLS > Calendar Preview > Font Size > Normal or Large.■MemoryTo monitor the amount of phone and card memory you are using for file storage, select MENU > SETTINGS & TOOLS > Memory and one of the following options:Save Options — to set the location of your pictures, video, and sounds, select Pictures, Videos, or Sounds > Phone Memory or Card Memory.Phone Memory — to view phone memory usage. Select from the following options:•Phone Memory Usage — to display the total used and available memory (KB or MB, depending on the file size).•My Pictures — to display the size of each picture file in My Pictures on the phone.•My Videos — to display the size of each video file in My Videos on the phone.•My Music — to display the size of each music file in My Music on the phone.•My Sounds — to display the size of each sound file in My Sounds on the phone.You can also erase or move pictures, videos, and sounds files to a memory card. To erase files, select Options > Erase, select the files you want, and MARK or Mark All. Then select Done > Yes > OK. To move files to the memory card, select Options > Move, select the files you want, and MARK or Mark All. Then select Done > Yes > OK.Card Memory — to view card memory usage.6205_ENv3_9204913.fm Page 71 Thursday, April 24, 2008 5:10 PM

SETTINGS & TOOLS72■Phone InformationTo view information about your phone, select MENU > SETTINGS & TOOLS > Phone Info to display the following information:My Number — the active phone number.SW/HW Version — the current software and hardware version for your phone.Icon Glossary — the library of screen icons shown while on a call or when using features.Software Update — to check the status of your current software on your phone. This feature will not work if you are in roaming or emergency mode. To check if there are new software updates available for your phone, select Check New.6205_ENv3_9204913.fm Page 72 Thursday, April 24, 2008 5:10 PM

Voice Commands739. Voice CommandsVoice commands transform your device into your own virtual personal assistant, letting you use your voice to make phone calls, look up contacts, play and control your music, and so on.Before using voice services, note the following:• Voice commands are language-dependent. They are not dependent on the speaker’s voice.• Voice commands are sensitive to background noise. Use them in a quiet environment.• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Note: Using voice commands may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.■Activate and Use Voice CommandsTo activate the voice commands function, select MENU > SETTINGS & TOOLS > Tools > Voice Commands, or press the Voice Command key (see "Phone at a Glance," p. 11). The following options are displayed:1. Call <Name> <Loc> — say "Call" and then a name or a phone number from your Contact List. For example, "Call Tom Smith", "Call Tom Smith’s mobile", or "Call 617 515 212".2. Send <Msg Type> — say "Send Message" and the command will prompt you for the type of message. After choosing the desired message type (Text, Picture, or Video), the system will ask you for the contact name or number.Or, if you say a full-sentence command such as "Send text to Tom", the command will prompt you to confirm the message and ask for the contact number. It will automatically start a message based on the message type you asked.6205_ENv3_9204913.fm Page 73 Thursday, April 24, 2008 5:10 PM

Voice Commands743. Lookup <Name> — say "Lookup" and the name from your Contact List (for example, "Lookup Tom") to retrieve and display information of the voiced contact.4. Play <Playlist> — say "Play" and the name of the playlist stored in your phone (for example, "Play Knock").5. Go To <Menu> — say "Go To" to open the list of menu options on your phone and choose the menu you want. Or say a full command by saying "Go To" and the application name (for example, "Go To Contacts").6. Check <Item> — say "Check" and the command prompts you for a list of items. Or say "Check status" to hear all status information of your phone; including network status, voicemail, message, number of missed call, time and date, battery level, signal strength and volume.7. My Account — say "My Account" to access your Verizon Wireless account information.8. Help Guide — say "Help Guide" to see all instructions on how to use these commands.For detailed instructions on how to use each command, select the command you want (except for Help Guide) and press Info.To adjust the settings of your voice commands, press Settings to view more options.■Voice Commands SettingsTo access the Voice Settings menu, select MENU > SETTINGS & TOOLS > Phone Settings > Voice Settings. Or press the Voice Command key (see "Phone at a Glance," p. 11), and then press Settings.The following settings are available:•Choice Lists — when your phone is unsure of the name or number you have said, a list of three choices is shown. This setting allows you to control how and if the choices are displayed. You can set the choices to be shown:•Automatic — is the default setting and displays a list of choices6205_ENv3_9204913.fm Page 74 Thursday, April 24, 2008 5:10 PM

Voice Commands75•Always On — displays a list of choices•Always Off — always chooses the best match for selecting a contact•Sensitivity — use the Directional key to set how sensitive the voice recognition on your phone is. If many of your voice commands are rejected, then press Down on the Directional key to adjust the setting towards Reject Less. If your phone is not recognizing your commands correctly and is activating the wrong names or numbers, press Up the Directional key to adjust the setting towards Reject More.•Digit Dialing — to set how your phone recognizes your voice. Select Adapt Digits to allow your phone to recognize your voice for each number on your Alphanumeric keypad. Your phone will ask you to say a sequence of numbers, so they can be recorded. When the numbers are recorded, they will be played back to you. You can rerecord them if you are unhappy with your pronunciation, otherwise select OK. Select Reset Digits to restore the number sounds to the original factory settings (functions after use Adapt Digits).•Sound — to set how your phone prompts you for your voice command information.Select Mode > Prompt Mode, Readout Mode, or Tones Only Mode.•In Prompt Mode, your phone prompts you for information.•In Readout Mode, your phone prompts you for information and reads out the menu items as you navigate.•In Tones Only Mode, your phone prompts you with beeps only.Select Name Settings to alter the way a name sounds when your phone plays it. There are two settings to adjust.•Select Speed to change the speed that a name is played back.•Select Volume to set the volume that a name is played back.Select Speakerphone to control if the speakerphone is On or Off when the voice recognition on your phone has been activated.•About — to see information about voice signal.6205_ENv3_9204913.fm Page 75 Thursday, April 24, 2008 5:10 PM

Enhancements7610. EnhancementsCheck the model number of any charger before use with this phone. This phone is intended for use when supplied with power from charger AC-6U for the BL-5C battery.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.6205_ENv3_9204913.fm Page 76 Thursday, April 24, 2008 5:10 PM

Battery and Charger Information7711. Battery and Charger InformationYour device is powered by a rechargeable battery. The battery intended for use with this device is BL-5C 1020 mAh Li-Ion battery. This device is intended for use when supplied with power from the following chargers: AC-6U travel charger. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved battery or charger may present a risk of fire, explosion, leakage, or other hazard.If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.Always turn the device off and disconnect the charger before removing the battery.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery performance is particularly limited in temperatures well below freezing.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.6205_ENv3_9204913.fm Page 77 Thursday, April 24, 2008 5:10 PM

Battery and Charger Information78Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help.Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids.Improper battery use may result in a fire, explosion, or other hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a service center for inspection before continuing to use it.Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children.■Nokia Battery Authentication GuidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, and inspect the hologram label using the following steps:Successful completion of the steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic, original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.6205_ENv3_9204913.fm Page 78 Thursday, April 24, 2008 5:10 PM

Care and Maintenance80Care and MaintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.6205_ENv3_9204913.fm Page 80 Thursday, April 24, 2008 5:10 PM

Care and Maintenance81• Use chargers indoors.• Always create a backup of data you want to keep, such as contacts and calendar notes.• To reset the device from time to time for optimum performance, power off the device and remove the battery.These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.6205_ENv3_9204913.fm Page 81 Thursday, April 24, 2008 5:10 PM

Additional Safety Information82Additional Safety Information■Small ChildrenYour device and its enhancements may contain small parts. Keep them out of the reach of small children.■Operating EnvironmentThis device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.■Medical DevicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Turn off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend that a minimum separation of 15.3 centimeters (6 inches) should be maintained between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should:6205_ENv3_9204913.fm Page 82 Thursday, April 24, 2008 5:10 PM

Additional Safety Information83• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on.• Not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the medical device to minimize the potential for interference.• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.• Read and follow the directions from the manufacturer of their implanted medical device.If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.Warning: For hearing aid compatibility, you must turn off the Bluetooth connectivity.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.• When using headphones, turn the volume down if you cannot hear the people speaking near you or if the person sitting next to you can hear what you are listening to.• Do not turn the volume up to block out noisy surroundings.• Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech, or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed 6205_ENv3_9204913.fm Page 83 Thursday, April 24, 2008 5:10 PM

Additional Safety Information84control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Turn off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially Explosive EnvironmentsTurn off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Turn off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.6205_ENv3_9204913.fm Page 84 Thursday, April 24, 2008 5:10 PM

Additional Safety Information86■ Certification Information (SAR)This mobile device meets guidelines for exposure to radio waves.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.53 W/kg.Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 0.96 W/kg and when properly worn on the body is 0.84 W/kg.6205_ENv3_9204913.fm Page 86 Thursday, April 24, 2008 5:10 PM

Additional Safety Information87■Hearing Aid Compatibility (HAC)Warning: For hearing aid compatibility, you must turn off the Bluetooth connectivity.Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone or higher value. The M-value, shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-value generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will operate with certain hearing aids. Some hearing aids are more immune than others to interference. Please consult your hearing health professional to determine the M-rating of your hearing aid and whether your hearing aid will work with this device. More information on accessibility can be found at www.nokiaaccessibility.com.■Technical InformationType designation — RM-347Dimensions — width, 45 mm; length, 92 mm; depth, 18.2 mmWeight — 93.5 g with 1020 mAh Li-Ion battery (BL-5C)Main Display — 2.0"-in TFT, 176x220 pixels (QCIF+), 262,000 colorsExternal Display — 1.28-in CSTN, 128x128 pixels, 65,000 colorsCamera — integrated 1.3Mpixels with digital zoom and flashRemovable Memory — microSD (Trans Flash)Wireless networks — CDMA 800 and 1900 MHz, and CDMA2000 1xRTT and EVDOFrequency range (Tx) — PCS: 1851.25-1908.75 MHz;cellular: 824.70-848.31 MHzFrequency range (Rx) — PCS: 1931.25-1988.75 MHz;cellular: 869.70-893.31 MHzGPS frequency — 1575.42 MHzBluetooth frequency range — 2.402-2.48 GHz6205_ENv3_9204913.fm Page 87 Thursday, April 24, 2008 5:10 PM

Additional Safety Information88■Battery InformationThis section provides information about battery charging times with the AC-6U travel charger, and talk and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.Important: Battery talk and standby times are estimates only and depend on signal strength, network conditions, features used, battery age and condition, temperatures to which battery is exposed, use in digital mode, and many other factors. The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the Standby Mode will affect its talk time.Charging timesThe following charging times are approximate:Talk and standby timesOperation times are estimates only and depend on signal strength, device use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.Charger options AC-6UBL-5C 1020 mAh Li-lon battery Up to 3 hoursFunction DigitalTalk time Up to 4 hours 30 minutesStandby time Up to 253 hours6205_ENv3_9204913.fm Page 88 Thursday, April 24, 2008 5:10 PM

Index89IndexNUMERICS123 mode 262-Sec pause 47AABC mode 26Abc mode 26about your phone 6accessibility 9alarm clock 59alerts 40answer options 69antenna 17application memory 33Bback coverremoving 18replacing 19backlight 64banner 64batterychargers 77charging 19charging times 88information 77, 88removing 18replacing 18talk and standby times 88billing 9Bluetooth 61connection 61Ccalendar 58call settingsanswer options 69auto retry 69DTMF tones 70one touch dial 70TTY mode 69voice privacy 70call timers 55callback number 44callergroup 50ID 23callsanswering 23duration of 55headset 23in-call options 24making 22missed 55muting 24pauses when making 47silencing 23vibrate mode 24calulator 57camera 31care and maintenance 80certification information (SAR) 86chargerconnecting 19information 77times 886205_ENv3_9204913.fm Page 89 Thursday, April 24, 2008 5:10 PM

Index90clock 65contactinformation 9list 49CONTACTSdefault number 47new 46numbers with pauses 47content memory 33contrast settings 64copyright protection 36customer service 9Ddefault numbercallback 44contacts 46deleting messages 45device information 72dimensions 87Directional key 10, 16, 66displaybacklight 64banner 64contrast 64font size 65themes 65wallpaper 64downloadingextras 33games 32information 33pictures 32videos 32drafts 43DTMF tones 70duration of calls 55EE911 only 67e-mail 45emergency calls 34location sharing 67while using wireless internet 34EMS 35enhanced roaming indicator 63enhancements 76entry mode 25, 43ERI 63Ffont size 65front clock 65Ggames 32GET IT NOW 27groups 50Hheadsetcalling 23connecting 20hearing aids 83help 8Iinbox 40indicators and icons 13instant messaging 45Llanguage 67location sharing 676205_ENv3_9204913.fm Page 90 Thursday, April 24, 2008 5:10 PM

Index91Mmain clock 65medical deviceshearing aids 83MEID 8memory information 33, 71menu settings 65messagescharacters 38, 39chatting 45composing 35, 38, 39draft 40e-mail 45EMS 35erasing 44inbox 40MMS 36mobile IM 45options 37, 38, 40, 42Quick Text 43replying 40sent 42SMS 35text 35voicemail 44MESSAGINGsegments 35settings 43size 35microSD card 21MMS 36Music & Tones 28mute function 24my account 57my ringtones 28NNAM selection 68networkservice 7settings 65news & info 33Nokia support 9notepad 24number mode 26Oone touch dial 70online album 31optionsContact List 49ICE contacts 53inbox 40messages 43picture message 38sent message 42TXT message 37video message 40Ppauses 47phonelock 67set up 17settings 65picture & video messages 31formats 36settings 43pictures 31ID 23supported formats 36taking 316205_ENv3_9204913.fm Page 91 Thursday, April 24, 2008 5:10 PM

Index92powering on/off 20preview 38priority level 37QQuick Text 40, 42, 43RRECENT CALLS 55ringtones 28Ssafety 6, 82security 34, 67security and functionality 34settingsBluetooth 61phone 65sounds 63SETTINGS & TOOLS 57shortcut key 66signature 44silent mode 24SMS 35soft keys 10, 11software version 72sound settings 63soundsalert 63picture message 28supported formats 36speakerphone 22speed dials 22, 52Standalone Mode 65standby mode 13stop watch 60symbols mode 26synchronizing music 29systemdevice information 72language 67NAM selection 68security 67selecting 68Ttalk and standby times 88technical information 87text entryAbc mode 26abc mode 26entry mode 25new message 36number mode 26word mode 25text messages 37themes 65timers 55toolsalarm clock 59calculator 57calendar 58notepad 60stop watch 60voice commands 57world clock 60TTY mode 69turning the phone on/off 20TXT messagecharacters 35writing and sending 37type designation 876205_ENv3_9204913.fm Page 92 Thursday, April 24, 2008 5:10 PM

Index93VV CAST 27V CAST music 28vibrate mode 24videosdownloading 32recording 32supported formats 36voice commands 73voice privacy 70voicemail 44volumeadjusting 23, 63earpiece 23Wwallpaper 64WAP 7wirelessinternet 34networks 87world clock 60wrist strap 20writing and sending messages 376205_ENv3_9204913.fm Page 93 Thursday, April 24, 2008 5:10 PM

94Notes6205_ENv3_9204913.fm Page 94 Thursday, April 24, 2008 5:10 PM