Microsoft RM-377 CDMA Cellphone User Manual N2228 EN RUIM Gold 06 05 08 FCC
Microsoft Mobile Oy CDMA Cellphone N2228 EN RUIM Gold 06 05 08 FCC
Manual
Nokia RM-377 User Guide
© 2008 Nokia. All rights reserved.
Nokia, Navi and Nokia Connecting People are trademarks or registered
trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia
Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the
contents in this document in any form without the prior written
permission of Nokia is prohibited.
Includes RSA BSAFE cryptographic or security protocol software
from RSA Security.
Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes and improvements to any of the products described in
this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE
RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER
CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS
REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE
THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Reverse engineering of any software in the Nokia device is prohibited to
the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia’s representations warranties, damages and
liabilities, such limitations shall likewise limit any representations,
warranties, damages and lialibities of Nokia’s licensors.
The availability of particular products and applications for these products
may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology, or software subject to
export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC can require
you to stop using your telephone if such interference cannot be eliminated.
If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user’s
authority to operate this equipment.
xxxxxxx/Issue 1
Contents
SAFETY...................................................................................... 6
General information .............................................................. 10
Access codes........................................................................................................... 10
Nokia support on the web.................................................................................. 10
1. Get started........................................................................ 11
Install and remove battery ................................................................................. 11
Insert UIM card...................................................................................................... 13
Charge the battery................................................................................................ 14
Switch your device on or off ............................................................................. 15
Normal operating position ................................................................................. 15
2. Your device ....................................................................... 17
Keys and parts........................................................................................................ 17
Standby mode and shortcuts............................................................................. 18
Keyguard.................................................................................................................. 19
3. Call functions .................................................................... 21
Make and answer a call ...................................................................................... 21
Conference calling................................................................................................ 21
Loudspeaker............................................................................................................ 22
Voice dialing........................................................................................................... 22
4. Write text ......................................................................... 24
Traditional text input........................................................................................... 24
Predictive text input............................................................................................. 24
5. Menu functions................................................................ 26
Messaging ............................................................................................................... 26
Contacts................................................................................................................... 33
Log............................................................................................................................. 35
Settings.................................................................................................................... 36
Gallery ...................................................................................................................... 46
Media........................................................................................................................ 49
Organiser ................................................................................................................. 53
Applications............................................................................................................ 57
Web........................................................................................................................... 57
Extras........................................................................................................................ 58
UTK ............................................................................................................................ 58
6. Enhancements .................................................................. 59
7. Battery and charger information .................................... 60
Nokia battery authentication guidelines........................................................ 63
Care and maintenance........................................................... 66
Additional safety information .............................................. 69
6
SAFETY
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for further
information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use
is prohibited or when it may cause interference or
danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first
consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel, chemicals, or
blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this
product.
7
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do
not connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
■About your device
The wireless device described in this guide is approved for use on
the CDMA 800 MHz network. Contact your service provider for
more information about networks.
When using the features in this device, obey all laws and respect
local customs, privacy and legitimate rights of others, including
copyrights.
Copyright protection may prevent some images, music, and other
content from being copied, modified or transferred.
Your device may have preinstalled bookmarks and links for third-
party internet sites. You may also access other third-party sites
through your device. Third-party sites are not affiliated with
Nokia, and Nokia does not endorse or assume liability for them. If
you choose to access such sites, you should take precautions for
security or content.
8
Warning: To use any features in this device, other than
the alarm clock, the device must be switched on. Do not
switch the device on when wireless device use may
cause interference or danger.
Remember to make back-up copies or keep a written record of all
important information stored in your device.
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
■Network services
To use the phone you must have service from a wireless service
provider. Many of the features require special network features.
These features are not available on all networks; other networks
may require that you make specific arrangements with your
service provider before you can use the network services. Your
service provider can give you instructions and explain what
charges will apply. Some networks may have limitations that
affect how you can use network services. For instance, some
networks may not support all language-dependent characters
and services.
Your service provider may have requested that certain features be
disabled or not activated in your device. If so, these features will
9
not appear on your device menu. Your device may also have a
special configuration such as changes in menu names, menu
order, and icons. Contact your service provider for more
information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run
on TCP/IP protocols. Some features of this device, such as sending
e-mail, browsing websites, or downloading files require network
support for these technologies.
10
General information
■Access codes
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device. Making an emergency call in the offline profile or
when the device is locked requires that the device
recognise the number to be an official emergency number.
It is advisable to change the profile or unlock the device by
entering the lock code before you make the emergency
call.
To activate the device when it is locked, enter the lock
code. The default lock code is 1234.
To define the security settings for your device, select
Menu > Settings > Security.
■Nokia support on the web
Check www.nokia.com/support or your local Nokia
website for the latest guide, additional information,
downloads, and services related to your Nokia product.
11
1. Get started
■Install and remove battery
Note: Always switch the device off and
disconnect the charger before removing the
battery.
1. To remove the cover,
with the back of the
device facing you, press
the release button, and
lift up the back cover.
2. To insert the battery,
position the battery so
the gold-coloured
contacts match up with
those on the device, and
insert the battery into
the battery slot.
1.3 megapixel
1.3 megapixel
12
3. Push down on the other
end of the battery to snap
the battery into place.
4. Insert the back cover
toward the top of the
device, and press it down
until you hear a click.
5. To remove the battery,
remove the cover (see
step 1), and insert your
finger into the finger
grip, to lift the battery
from its compartment.
1.3 megapixel
1.3 megapixel
13
■Insert UIM card
Always switch the device off and disconnect the charger
before inserting or removing the UIM card.
1. Remove the cover and battery. See steps 1 and 5 in
"Install and remove battery", p. 11.
2. Ensure that the gold-
coloured area on the UIM
card is facing downwards,
and insert the UIM card
into the card slot.
3. Install the battery, and
replace the cover. See step
4 in "Install and remove battery", p. 11.
14
■Charge the battery
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and
may be dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to
a wall socket.
2. Connect the charger
plug to the USB
connector at the left
side of the device.
If the battery is completely
discharged, it may take a few seconds before the charging
indicator appears on the display or before any calls can be
made.
15
■Switch your device on or off
Press and hold the power key on the
keypad for at least three seconds.
Warning: Do not switch
the device on when wireless phone use is
prohibited or when it may cause interference or
danger.
■Normal operating position
Your device has an internal antenna.
Hold the phone as you would any other
telephone with the antenna pointed up
and over your shoulder.
1.3 megapixel
16
Note: As with any radio
transmitting device, avoid
touching the antenna area
unnecessarily while the antenna
is transmitting or receiving.
Contact with such an antenna
affects the communication
quality and may cause the
device to operate at a higher power level than
otherwise needed and may reduce the battery
life.
17
2. Your device
■Keys and parts
1. Earpiece
2. Volume key
3. Right selection key
4. Power/End key
5. Camera key
6. Microphone
7. Keypad
8. Call key
9. Left selection key
10.Navi™; hereafter referred to
as scroll key
11.Charge / USB port
12.Headset connector
13.Camera lens
14.Speaker
15.Release button
1.3 megapixel
8
7
9
11
10
12
2
1
5
6
4
3
13
14
15
18
■Standby mode and shortcuts
Depending on your wireless service provider and the
model number of your device, some or all of the following
selection keys may appear in the standby mode.
1. Signal strength — Shows the
signal strength of the
wireless network at your
current location.
2. Battery level — Shows the
battery charge level.
3. Go to — Press the left
selection key to access a
certain feature quickly.
4. Names — Press the right selection key to access the
contacts list.
5. Menu — Press the middle selection key to access the
main menu.
Go to Names
Menu
12
34
5
19
Shortcuts in the standby mode:
— To access the list of dialled numbers, press the call key
once.
— To access the main menu, press the middle selection
key.
— To switch between current profile and silent profile,
press and hold # for at least three seconds.
— To activate the radio function, press and hold * for at
least three seconds.
— For shortcuts of scroll key, see "My shortcuts", p. 40.
■Keyguard
Keyguard locks the keypad to prevent accidental key
presses. When the keypad is locked, calls still may be
possible to the official emergency number programmed
into your device. Enter the emergency number, and press
the call key. The number is displayed only after you have
entered its last digit.
To lock the keypad automatically when no keys are
pressed for a certain time, in the standby mode, select
Menu > Settings > Phone > Automatic keyguard > On.
20
To lock the keypad, select Menu, and press * within
2 seconds.
To unlock the keypad, select Menu, and press * within
2 seconds.
If you receive a call when the keypad is locked, it is
automatically unlocked, and then locked again when you
end the call.
21
3. Call functions
■Make and answer a call
To make a call, enter the phone number, including the
country code and area code, if necessary, and press the
call key. Press the volume key to adjust the volume of the
earpiece or headset during the call.
To answer a call, press the call key. To end a call or to
reject an incoming call, press the end key.
■Conference calling
Conference calling (network service) allows you to take
part in a conference call with another two participants. To
call a third party during a call, select Options > New call.
Enter the number you want, and press the call key. When
the new call is answered, press the call key to connect the
calls. To end the conference call, select Options > End all
calls, or press the end key.
22
■Loudspeaker
Warning: Do not hold the device near your ear
when the loudspeaker is in use because the
volume may be extremely loud.
To activate the loudspeaker during a call, select Loudsp.
To deactivate the loudspeaker, select Handset.
The loudspeaker is deactivated automatically when a call
(or a call attempt) ends or when certain enhancements are
connected.
■Voice dialing
You can make a phone call by saying the name that is
saved in the contact list of the device. Before using voice
dialling, you must record a voice tag in your device.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker’s voice.
• You must say the name exactly as your said it when
you recorded it.
23
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names,
and avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialling in all
circumstances.
To record a voice tag, select Menu > Contacts > Names >
Details > Options > Add voice tag. Select Start, and speak
after the tone. To stop recording, select Quit.
To activate voice dialling, press and hold the volume key
down. A short tone sounds, and Speak now is displayed. To
deactivate voice dialling, select Quit.
To make a call by voice dialling, clearly speak the name of
the contact you want to dial. If the device recognises the
name you spoke, it shows a list of matches. Using voice
commands to operate the device is similar to voice
dialling.
24
4. Write text
You can enter text using traditional or predictive
text input. To change the text input method,
and to switch between upper and lower case, press #. To
display a list of special characters, press *.
■Traditional text input
Press a number key, 2-9, repeatedly until the desired
character appears. To add a space, press 0. To add a
number, press and hold the desired number key.
■Predictive text input
Predictive text input is based on a built-in dictionary
when writing in English. Select Options > Prediction on.
When using predictive text input, press each key once for
each letter. The device suggests a matching word.
If the displayed word is the one you want, press 0, and
start writing the next word. If not, press * repeatedly to
view other word options.
25
If ? is displayed after the word, the word is not in the
dictionary. To add the word to the dictionary, select Spell,
enter the word using traditional text input, and select
Save.
26
5. Menu functions
The device functions are grouped into menus. Not all
menu functions or option items are described here.
In the standby mode, select Menu, scroll to the menu item
you want to open, and select it. To exit the current menu
level, select Exit or Back. To return to the standby mode,
press the end key.
■Messaging
You can only use messaging services supported
by your network or service provider.
Text message settings
Select Menu > Messaging > Text messages > Message
settings.
Select Sending options and from the following:
Priority — to send text messages with normal priority or as
urgent
27
Delivery reports— to receive confirmation when your
message is delivered
Send callback number — to send a number to which you
want to be called back
Signature — to attach a signature to outgoing messages.
Select Other settings and from the following:
Save incoming text messages — to automatically save
incoming text message on the device, on the UIM card, or
on the device only when the UIM card memory is full
Message font size — to change the font size when reading
and writing messages
Message overwriting — When the message memory is full,
your device cannot receive any new messages. To choose
which messages are overwritten when new ones arrive,
select Sent items only, Inbox only, or S. items & Inbox.
Save sent messages — to select whether to save sent
messages to the Sent items folder
Queue if no digital— to select whether messages that fail
to send are stored in the Outbox folder
28
Multimedia messages settings
Select Menu > Messaging > Multimedia messages >
Message settings and from the following:
Save sent messages — Select whether the multimedia
messages you send are saved to the Sent items folder.
Delivery reports — Select whether to receive message
delivery reports.
Default slide timing — Set the default time for slides in
multimedia messages.
Allow multimedia reception — Select whether to receive
multimedia messages. To only receive multimedia
messages when you are in your home network, select In
home network (network service). For more information,
contact your service provider.
Incoming multimedia messages Incoming multimedia
messages — Select whether incoming multimedia
messages are retrieved automatically or manually, or not
at all.
Allow advertisements — Select whether to block or allow
advertisements (network service) sent as multimedia
messages. For more information, contact your service
provider.
29
Write and send a text message
1. Select Menu > Messaging > Text message > Create
message.
2. To send the message to one recipient, select Add >
Contacts, the recipient, and Select.
3. To send the message to many recipients, select Add >
Contact groups, the group, and Select.
Write and send a multimedia message
To check availability and to subscribe to the multimedia
messaging service (network service), contact your service
provider.
Only devices that have compatible features can receive
and display multimedia messages. A multimedia message
can contain objects such as images, video clips, and sound
clips. The appearance of a message may vary depending
on the receiving device.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
30
To send a multimedia message, do the following:
1. Select Menu > Messaging > Multimedia messages >
Create message.
2. Select Insert, a multimedia folder and the file you want
to send.
3. Press scroll key to select the second or third files.
4. Select Send to insert the files into the message.
5. Enter the phone number or e-mail address for your
recipient, or select Add to retrieve a number or address
from the contacts list.
6. Enter a subject for the message and select Send.
Read and reply to a message
When you receive a message, a notification and are
displayed.
1. Select Show to read the message or Exit to dismiss the
notification.
in the standby mode indicates that you have
unread messages in your inbox.
2. Select Reply and from the available options.
31
3. Enter your reply, and select Send.
Inbox, Sent items, and Drafts folders
All incoming text and multimedia messages are saved in
the Inbox folder. Outbox contains unsent and failed
messages.
If you have set the device to save the sent messages, they
are saved in the Sent items folder.
To save the message you are writing to the Drafts folder to
edit and send later, select Options > Save as draft (text
message) or Save message (multimedia message).
Delete messages
If your message memory is full and you have incoming
messages, blinks in the standby mode. To receive the
messages, delete some of the old messages.
To delete a message, select Menu > Messaging > Text
messages or Multimedia messages, the message, and
Options > Delete > Yes.
32
To delete all text messages in a folder, select Menu >
Messaging > Text messages > Delete messages > All, All
read, All unread and the folder.
To delete all multimedia messages in a folder, select
Menu > Messaging > Multimedia messages > Delete
messages and the folder.
Voice messages
To activate voice mail (network service), contact your
service provider. When you subscribe to the service, you
receive voice mailbox number. Save the number to your
device. For more information, contact your service
provider.
To listen to your voice messages, select Menu >
Messaging >Voice message >Listen to voice messages, or
press and hold 1 in the standby mode.
Minibrowser message
Minibrowser messaging is a network service. See
"Network services", p. 8 for more information.
33
Minibrowser (network service) allows you to check your e-
mail messages with your device. Select Menu >
Messaging > Minibrowser messages.
Important: Exercise caution when opening
messages. Messages may contain malicious
software or otherwise be harmful to your device
or PC.
■Contacts
To search for a contact, select Menu
>Contacts > Names > Options > Find, and
enter the first character of the contact name. Matching
contacts are displayed. To change the text input method,
select #. To edit the detail, set speed dial, or add voice tag
for contact, highlight the contact, and select Details >
Options and from the available options.
To define how the contact names are displayed, select
Menu > Contacts > Settings and from the available
options. To view how much memory your contacts
information is using, select Memory status.
34
To copy or move contacts from your device to the UIM
card, or from the UIM card to your device, select Menu >
Contacts > Move contacts or Copy contacts.
To empty your contacts list, select Menu > Contacts >
Delete all contacts.
Groups
Groups allow you to send messages to a designated group
of people.
To add a new group, select Menu > Contacts > Groups >
Add, the detail for the group, and Save.
Voice tag
You can record voice tags for contacts to call them using
voice dialling. See "Voice dialing", p. 22.
Speed dials
Speed dialling allows you call a contact just by pressing
and holding a key.
To call your voice mailbox, press and hold 1 in the standby
mode. To assign a phone number to another number key,
35
select Menu > Contacts > 1-touch dialng > a number key
from 2-9, and Assign. Enter the phone number you want
to assign to the key, or select Search to retrieve the
number from your contacts.
■Log
To view your most recent missed or received
calls or dialled numbers, select Menu > Log >
Missed calls, Received calls, or Dialed numbers. You can
view the date and time of the call, edit, view, or call the
registered phone number, send a text message to it, or
save it to your contacts.
To view all of the numbers chronologically, select Call log.
To view the contacts to whom you most recently sent
messages, select Message recipients.
To delete calls from the log, select Menu > Log > Clear log
lists and from the available options.
To view the approximate duration of calls, select Menu >
Log > Call duration. To reset the timers, select Clear
timers, enter your lock code, and select OK.
36
To view the duration or amount of data sent or received
during data and fax calls (network service) or using the
minibrowser (network service), select Menu > Log > Data/
fax calls or Minibrowser calls.
■Settings
From this menu, you can adjust various device
settings.
Profiles
Profiles define how your device reacts when you receive a
call or message, and how your keypad sounds when you
press a key. You can personalise ringing options, keypad
tones, and other settings for each of the available profiles.
The available profiles are: General, Silent, Meeting,
Outdoor, Flight, and two customisable ones.
To activate or customise a profile or set a time limit for a
profile, select Menu > Settings > Profiles, a profile, and
Activate, Personalise, or Timed.
37
Themes
A theme contains various elements for personalising your
device.
To change the theme for your device, select Menu >
Settings > Themes, select a theme, and Apply.
Tones
Tone settings only apply to the currently selected profile.
Select Menu > Settings > Tones and from following:
Incoming call alert — to set the alert type for incoming
calls
Ringing tone — to set the tone for incoming calls
Ringing volume — to set the volume level for the ringing
tone and message alert tone
Incoming call video — to set a video clip to be played when
you receive call
Vibrating alert — to set the device to vibrate when you
receive a call or a text message
Message alert tone — to set the tone to sound when you
receive a text message
38
Keypad tones — to select the volume level of the keypad
tones
End of list tone — to set a tone to sound when you are at
the end of a menu list, contacts list, or calls list
Other tones — to select a tone for other functions
Application tones — to set the application default tone
Alert for — to set the device to alert for all calls or only
when a member of a selected caller group calls
Display
Select Menu > Settings > Display and from the following
options:
Wallpaper — to set a background image that is displayed
when the device is in the standby mode
Standby mode font color — to set the font colour for text
shown in the standby mode
Light indicator — to set how long the light indicator can
blink when the device receives a notification
Screen saver — to set a screen saver for the display
Power saver — to select the power saver for saving battery
39
Sleep mode — to turns the phone display off during
inactivity
Font size — to select the font size for display text
Active standby — to switch the active standby mode on or
off and to organise and personalise the active standby
mode
Navigation key icons — to display the icons of the current
scroll key shortcuts in the standby mode when the active
standby mode is off
Date and time
Select Menu > Settings > Date and time and from the
following:
Date and time settings — to set the date and time, change
the time zone, and daylight saving time
Date and time format settings — to set the format for the
date and time
Auto-update of date & time — to set whether your device
updates the date and time automatically
40
My shortcuts
To quickly access your most frequently used functions,
add them to the My shortcuts menu.
Select Menu > Settings > My shortcuts, the key on which
you want to assign the shortcut to, and Select.
Connectivity
You can transfer data between your device and a
compatible PC using a CA-101 USB data cable.
Important: To make a phone call, disconnect the
USB data cable.
To be asked for the purpose of the connection each time
when the cable is connected, select Menu > Settings >
Connectivity > USB data cable > Ask on connection.
To use the PC Suite to transfer files between your device
and PC:
1. Connect your device and your PC with a CA-101 USB
data cable.
2. If asked to select the connection mode, select PC Suite.
41
Call
Select Menu > Settings > Call and from the following
options:
Anykey answer — to answer an incoming call by pressing
any key except the call key or the left selection key
Automatic redial — to automatically redial a number after
an unsuccessful call attempt
1-touch dialing — to select whether the number keys
(2-9) can be used for calling a number by pressing and
holding the key
Calling card — to save up to four calling card numbers in
your device to use for long distance calls
Abbreviated dialing — to save a short phone number
(2-3 digits) for speed dialling
Preferred carrier — to select the preferred long distance
carrier
International prefix — to make calls using the + sign as the
international prefix. The device replaces the + sign in a
saved phone number when making a call
Data/fax calls — to set your device to send or receive data
and fax calls when connected to a device such as a PDA or
PC
42
Call summary — to display the call duration when you end
a call
Show call time on display — to select whether the duration
of the current call is displayed
Ringing tone for no caller ID — to set whether a tone
sounds for calls where there is no caller ID
Device
Select Menu > Settings > Phone and from the following
options:
Language settings — to select the language for the display
text
Memory status — to view the free memory and used
memory of your device
Automatic keyguard — to set the keypad to lock
automatically after a preset time delay
Touch tones — to set the tone duration when you press the
keys on your device keypad
Start-up tone and Switch-off tone — to select whether the
device sounds a tone when it is switched on or off
43
Welcome note — to write a welcome note that briefly
appears when you switch your device on
Confirm UIM service actions — to ask for confirmation for
UIM service actions
Help text activation — to display brief descriptions for
most menu items
Flight query — to be asked if the Flight mode should be
used each time the device is switched on
Backlight time-out — to define how long the backlight
remains on
Voice commands
You can set up to five voice commands, which allow
hands-free operation of certain device features.
Before using voice commands, you must add a voice tag to
the device function.
1. Select Menu > Settings > Voice commands.
2. Select the device function you want to tag, select Add
> Start and speak the voice tag clearly into the
microphone. After recording the voice tags, you may
change or delete them.
44
To activate a voice command, press and hold the right
selection key in the standby mode. When Speak now is
displayed, say the voice tag clearly into the microphone.
If a match is found, the function is activated. If a match is
not found, the message No match found is displayed.
Enhancements
To connect a compatible enhancement to your device,
select Menu > Settings > Enhancements .
To select the profile automatically activated when your
phone is connected to the charger, select Charger >
Default profile.
To optimise the sound quality when using a t-coil hearing
aid, select Hearing aid > T-coil hearing aid mode > On.
Security
To set the security settings for your device, select Menu >
Settings > Security > Change lock code, Security level, PIN
code request, Change PIN code, Call restrictions, or Voice
privacy.
45
Network
The Network menu allows you to customise how your
device chooses which network to operate in while you are
within or away from your primary or home system. Your
device is set to search for the most effective network. To
set which network to use when the device cannot find a
preferred network, select Menu > Settings > Network >
Set mode, and select a mode.
Network services
To view the network services available on your device,
select Menu > Settings > Network services and from the
available options. For more information, contact your
service provider.
Device information
To view the user, version, system, and icon information of
your device, select Menu > Settings > Phone details.
46
Restore settings
You can restore the original factory settings to your device
without affecting personal data such as contacts,
language selection, or calendar notes.
To reset some of the menu setting to their original signal:
1. Select Menu > Settings > Restore settings > Restore
settings only.
2. Enter your lock code, and select OK.
■Gallery
You can save images, videos clips, music files,
tones, and recordings to a folder in Gallery.
Graphics
You can personalise your device with a background
picture (wallpaper), screensavers, stylish clip-art, and
frames using the preloaded or downloaded images in this
folder. To display a list of available images folders, select
Menu > Gallery > Graphics >Open. To delete, send, or
move an image, select the image, Options, and from the
available options.
47
Images
To view and manage images captured with your device
camera, select Menu > Gallery > Images > Open. To delete
or send an image, select the image, Options, and from the
available options.
Video clips
Video clips recorded with the camera are stored in the
Video clips folder. To view and manage video clips, select
Menu > Gallery > Video clips > Open. To set a video clips
as screen saver or call video, select the video clip, Options,
Use video clips.
Themes
Themes help you to personalise your device. To display a
list of available themes, select Menu > Gallery > Themes >
Open. To delete, send, move, or rename a theme, select the
theme, Options, and from the available options.
48
Tones
You can personalise your device with ringing tones and
alert tones. To display a list of available tones, select
Menu > Gallery > Tones. To listen to a tone, select the
tone and Open. To select the tone for incoming calls and
alert, select the tone, Options and Use tone.
Received files
Files sent to your device are saved in this folder. To display
a list of received files, select Menu > Gallery > Receiv. files
> Open. To delete, send, move, or rename the received
files, select a file, Options, and the available options.
Recordings
Recordings is the default folder for files you record. To
display a list of recordings, select Menu > Gallery >
Recordings > Open.To listen to a recording, select the
recording and Open. To move, delete, or send a recording
in Recordings, select Options and from the available
options.
49
■Media
Media offers the camera, video, media player,
radio, and voice recorder functions.
Camera
You can take photos with the built-in camera. The camera
produces images in JPEG format. The camera lens is on the
back of the device. Your device supports image capture
resolutions of up to 1024x1280 pixels.
You can send images in a multimedia message. You can
also attach an image to a contact to be displayed when
the contact calls you.
Capture an image
In the standby mode, select Menu > Media > Camera or
press the camera key.
To capture an image, press the camera key or Capture. The
image is saved in the Image folder in Gallery. To capture
another image, select Back. To send the image as a
message, select Send. To view more options, select
Options.
50
Camera options
In the standby mode, select Menu > Media > Camera >
Options and from the following:
Video — Switch to the still image or video mode.
Landscape mode or Portrait mode — Switch the capture
mode to landscape or portrait.
Night mode on or Night mode off — Switch the camera
night mode on or off.
Self-timer — Use the self-timer to include yourself in the
picture. Select the time for the camera to wait before
capturing the image after you press the camera key.
Img. sequence on and Img. sequence off — Capture three
images in succession.
Effects — Adjust the camera filters.
Open Gallery — Open the Gallery to view saved images.
Settings — Change the camera settings.
Video
You can record video clips with the built-in camera. The
video clips are saved in MPEG format. The camera lens is
on the back of the device. Your device supports image
capture resolution of up to 144 x167 pixels.
51
Record a video clip
In the standby mode, select Menu > Media > Video.
To record a video clip, press the camera key, or select
Record. To adjust the camera zoom level, press the scroll
key or volume key up and down. The video clip is saved in
the Recordings folder in Gallery. To record another video
clip, select Back. To send the video clip in a message,
select Options > Send. To view more options, select
Options.
Video options
In the standby mode, select Menu > Media > Video >
Options and from the following:
Still image — Switch to the still image or video mode.
Mute — Record a video clip without sound.
Effects — Adjust the video filters.
Open Gallery — Open the Gallery to view saved video clip
and other recordings.
Settings — Change the camera settings.
Media player
Download, view, and play compatible images, audio and
video files, and animated images from a variety of sources.
52
To open a file, select Menu > Media > Media player >
Open gallery, the file, and Open.
Radio
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement must be attached to the device for the FM
radio to function properly.
Warning: Listen to music at an moderate level.
Continuous exposure to high volume may
damage your hearing.
To listen to the radio, select Menu > Media > Radio.
To tune to a channel, scroll left or right. To go to the next
or previously saved station, scroll up or down. To search
for available stations, select Options > Search all stations.
To access more options while listening to a channel, select
Options. To turn the radio off, select Options >Turn off.
53
Voice recorder
Record speech or sound with your device and listen to
them later. You can record up to 180 seconds of sound,
depending on the available memory.
To start recording, select Menu > Media > Voice recorder,
and the record button . To stop recording, select the
stop button . The recording is saved to the Recordings
list in the Recordings folder in Gallery.
After you save a recording, select Options > Play last
recorded, Send last recorded, Recordings list, or Select
memory.
■Organiser
Your device contains features to help organise
your everyday.
Alarm clock
The alarm clock is based on the device clock. A set alarm
will sound even when the device is switched off.
To set an alarm, select Menu > Organiser > Alarm clock,
select On, and enter the time.
54
To set the phone to alert on selected days of week, select
Repeat and Repeat days.
To set the alarm tone, select Alarm tone.
When the alarm sounds, select Stop to shut the alarm off,
or Snooze to postpone it.
To turn off an active alarm, select Menu > Organiser >
Alarm > Off.
Calendar
The calendar keeps track of reminders, calls you need to
make, meetings, memos, to-do list, and birthdays. You can
also set an alarm to remind you of these events.
To open the calendar, scroll right, or select Menu >
Organiser > Calendar. To go to a specific date, select
Options in the calendar view and Go to date, enter the
date, and select OK.
To-do list
You can keep track of your tasks with the to-do list. To add
a to-do note, select Menu > Organiser > To-do list > Add
55
note . Enter the subject, priority, due date, due time, and
alarm type, and select Save.
Notes
You can save short notes in your device.
To add a note, select Menu > Organiser > Notes > Add
note. Enter the note, and select Save.
Calculator
You can use the calculator to add, subtract, multiply,
divide, calculate the square and the square root, and
convert currency values, also using the negative values.
Note: This calculator has limited accuracy and is
designed for simple calculations.
1. Select Menu > Organiser > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point, if necessary.
Press * repeatedly to add the add (+), subtract (-),
multiply (*), or divide (/) operator. Pause briefly to
select the displayed character.
56
3. Enter the second number in your calculation. To
display the result, select Equals. To perform a square or
square root calculation after, select Options > Square
or Square root.
Countdown timer
You can enter a specified time up to 99 hours, 59 minutes,
and 59 seconds. The timer starts to count down.
The countdown timer only works when the device is
switched on.
Select Menu > Organiser > Countd. timer.
To set the countdown timer, select Normal timer, enter
the time in hh:mm:ss format, select OK. Enter a note for
the timer, and select Start.
To set an interval timer, select Interval timer > Add new
timer, enter a name for the timer, and select Save. Enter
the time interval, and select OK.
To start an interval timer, select Menu > Organiser >
Countd. timer > Interval timer, the interval timer you
want, and Start timer > Start.
When the time runs out, your device sounds an alarm,
displays the timer note, and flashes its lights.
57
Stopwatch
Your device has a stopwatch that can be used to track
time. The stopwatch displays time in hours, minutes,
seconds, and fractions of a second.
Using the stopwatch, or allowing it to run in the
background when using other features, increases the
demand on battery power and reduces the battery life.
To use the split time or lap time functions for activities
where you need to time yourself, select Menu > Organiser
> Stopwatch > Split timing or Lap timing > Start.
To stop the stopwatch, select Stop.
■Applications
Applications is a network service. For more
information, see "Network services", p. 8.
The Brew functions may be listed if your service provider
supports these features.
■Web
You can access various mobile internet services
with your phone browser. Check the availability
58
of these services, pricing, tariffs, and intructions with your
service provider.
■Extras
Select Menu > Extras.
To play a game in your device, select Games.
To set or view the time in a different location, select
Collection > World clock .
To calculate exchange rates, select Collection > Converter.
■UTK
Your UIM card may provide additional services.
You can access this menu only if it is supported
by your UIM card. The name and contents of the menu
depend on the available services. For availability and
information on using UIM card services, contact your UIM
card vendor. This may be the service provider, network
operator, or other vendor.
59
6. Enhancements
For availability of approved
enhancements, please check
with your dealer. When you
disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and
may be dangerous.
60
7. Battery and charger information
This section provides information about your phone
batteries, enhancements, chargers, safety guidelines and
technical information. Be aware that the information in
this section is subject to change as batteries, chargers,
and enhancements change.
Your device is powered by a rechargeable battery. The
battery intended for use with this device is BL-4C 860
mAh Li-lon battery. This device is intended for use when
supplied with power from the following charger: AC-6U.
The battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal, replace
the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers
designated for this device. Use of an unapproved battery
or charger may present a risk of fire, explosion, leakage, or
other hazard.
If a battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be
necessary to connect the charger, then disconnect and
61
reconnect it to begin charging the battery. If the battery is
completely discharged, it may take several minutes before
the charging indicator appears on the display or before
any calls can be made.
Always switch the device off and disconnect the charger
before removing the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will lose
its charge over time.
Always try to keep the battery between 15°C and 25°C
(59°F and 77°F). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery
performance is particularly limited in temperatures well
below freezing.
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object such as a coin,
clip, or pen causes direct connection of the positive (+)
and negative (-) terminals of the battery. (These look like
metal strips on the battery.) This might happen, for
62
example, when you carry a spare battery in your pocket or
purse. Short-circuiting the terminals may damage the
battery or the connecting object.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of
batteries according to local regulations. Please recycle
when possible. Do not dispose as household waste.
Do not dismantle, cut, open, crush, bend, deform,
puncture, or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact
with the skin or eyes. In the event of such a leak, flush
your skin or eyes immediately with water, or seek medical
help.
Do not modify, remanufacture, attempt to insert foreign
objects into the battery, or immerse or expose it to water
or other liquids.
Improper battery use may result in a fire, explosion, or
other hazard. If the device or battery is dropped, especially
on a hard surface, and you believe the battery has been
damaged, take it to a service centre for inspection before
continuing to use it.
63
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Keep your battery
out of the reach of small children.
■Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorised Nokia dealer, and inspect
the hologram label using the following steps:
Successful completion of the steps is not a total assurance
of the authenticity of the battery. If you have any reason
to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it
to the nearest authorised Nokia service point or dealer for
assistance. Your authorised Nokia service point or dealer
will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of
purchase.
64
Authenticate hologram
1. When you look at the hologram
on the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another
angle.
2. When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3 and 4 dots on
each side respectively.
What if you battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorised Nokia service point or dealer for assistance.
The use of a battery that is not approved by the
manufacturer may be dangerous and may result in poor
65
performance and damage to your device and its
enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
66
Care and maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help
you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the
battery, and allow the device to dry completely before
replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving
parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns
to its normal temperature, moisture can form inside the
device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in
this guide.
• Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
67
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement antenna.
Unauthorised antennas, modifications, or attachments could
damage the device and may violate regulations governing
radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes.
• To reset the device from time to time for optimum
performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery, charger,
or any enhancement. If any device is not working properly, take it
to the nearest authorised service facility for service.
68
Disposal
The crossed-out wheeled-bin symbol on your product,
literature, or packaging reminds you that all electrical
and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their
working life. This requirement applies to the European
Union and other locations where separate collection
systems are available. Do not dispose of these products
as unsorted municipal waste.
By returning the products to collection you help prevent
uncontrolled waste disposal and promote the reuse of
material resources. More detailed information is
available from the product retailer, local waste
authorities, national producer responsibility
organizations, or your local Nokia representative. For the
product Eco-Declaration or instructions for returning
your obsolete product, go to country-specific
information at www.nokia.com.
69
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep
them out of the reach of small children.
■Operating environment
This device meets RF exposure guidelines when used either in the
normal use position against the ear or when positioned at least
2.2 centimeters (7/8 inch) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it
should not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmission of data
files or messages may be delayed until such a connection is
available. Ensure the above separation distance instructions are
followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
70
■Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when
any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum
separation of 15.3 centimetres (6 inches) should be maintained
between a wireless device and an implanted medical device, such
as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have
such devices should:
• Always keep the wireless device more than 15.3 centimetres
(6 inches) from the medical device when the wireless device is
turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical
device to minimise the potential for interference.
71
• Turn the wireless device off immediately if there is any reason
to suspect that interference is taking place.
• Read and follow the directions from the manufacturer of their
implanted medical device.
If you have any questions about using your wireless device with
an implanted medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as electronic
fuel injection systems, electronic antiskid (antilock) braking
systems, electronic speed control systems, and air bag systems.
For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been
added.
Only qualified personnel should service the device or install the
device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in
your vehicle is mounted and operating properly. Do not store or
72
carry flammable liquids, gases, or explosive materials in the same
compartment as the device, its parts, or enhancements. For
vehicles equipped with an air bag, remember that air bags inflate
with great force. Do not place objects, including installed or
portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could
result.
Using your device while flying in aircraft is prohibited. Switch off
your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation of
the aircraft, disrupt the wireless telephone network, and may be
illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily
injury or even death. Switch off the device at refuelling points
such as near gas pumps at service stations. Observe restrictions
on the use of radio equipment in fuel depots, storage, and
distribution areas; chemical plants; or where blasting operations
are in progress. Areas with a potentially explosive atmosphere are
73
often, but not always, clearly marked. They include below deck on
boats, chemical transfer or storage facilities and areas where the
air contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of vehicles
using liquefied petroleum gas (such as propane or butane) to
determine if this device can be safely used in their vicinity.
■Emergency calls
Important: This device operates using radio signals,
wireless networks, landline networks, and user-
programmed functions. if your device supports voice
calls over the internet (internet calls), activate both the
internet calls and the cellular phone. The device will
attempt to make emergency calls over both the cellular
networks and through your internet call provider if both
are activated. Connections in all conditions cannot be
guaranteed. You should never rely solely on any
wireless device for essential communications like
medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal
strength. Depending on your device, you may also need to
complete the following:
• Insert a UIM card if your device uses one.
74
• Remove certain call restrictions you have activated in your
device.
• Change your profile from offline or flight profile mode to
an active profile.
2. Press the end key as many times as needed to clear the display
and ready the device for calls.
3. Enter the official emergency number for your present
location. Emergency numbers vary by location.
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device may
be the only means of communication at the scene of an accident.
Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
75
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR. The
SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram
(W/kg) averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested
frequency bands. The actual SAR level of an operating device can
be below the maximum value because the device is designed to
use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you
are to a network base station. The highest SAR value under the
ICNIRP guidelines for use of the device at the ear is 0.76 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on national
reporting and testing requirements and the network band.
Additional SAR information may be provided under product
information at www.nokia.com.
Your mobile device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram
of tissue. The highest SAR value reported under this standard
during product certification for use at the ear is 1.12 W/kg and
when properly worn on the body is 0.55 W/kg.
76
■Technical information
■Battery information
This section provides information about battery charging times
with the travel charger (AC-6U), and talk and standby times. The
information in this section is subject to change. For more
information, contact your service provider.
Feature Specification
Dimensions Width 40 mm
Length 110 mm
Depth 12 mm
Weight 72 g with BL-4C Li-ion battery
Wireless networks CDMA 800 MHz
Volume 46.4 cc
Cell Frequency range (Tx) 824.70~848.31 MHz
Cell Frequency range (Rx) 869.70~893.31 MHz
Audio formats MIDI, MP3, 4GV-EVRC-B, QCELP
Ringing tones MIDI 64 polyphonics
77
Important: Battery talk and standby times are
estimates only and depend on signal strength, network
conditions, features used, battery age and condition,
temperatures to which battery is exposed, use in digital
mode, and many other factors. The amount of time a
device is used for calls will affect its standby time.
Likewise, the amount of time that the device is turned
on and in the standby mode will affect its talk time.
Charging times
The following charging times are approximate:
Talk and standby times
Operation times are estimates only and depend on signal
strength, phone use, network conditions, features used, battery
age and condition (including charging habits), temperatures to
which the battery is exposed, and many other factors.
Charger AC-6U
BL-4C 860 mAh Li-Ion battery Up to 3.5 hours
Function Digital
Talk time Up to 3.5 hours
Standby time Up to 10 days