Microsoft RM-493 GSM cellular phone w/BT User Manual Manual

Microsoft Mobile Oy GSM cellular phone w/BT Manual

Manual

Nokia E71 User Guide7777777Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlack
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-493 product is in compliance with the essential requirements and otherrelevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/phones/declaration_of_conformity/.© 2008 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia Original Enhancements logos, Eseries, Nokia E71, and Visual Radio are trademarks or registered trademarks ofNokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks ortradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.This product includes software licensed from Symbian Software Ltd ©1998-2008. Symbian and Symbian OS are trademarks of SymbianLtd.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.Portions of the Nokia Maps software are ©1996-2008 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANYLOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONTO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.0434CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
For the most current product information, please refer to www.nokia.com.cn.Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide containsany limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,damages and liabilities of Nokia's licensors.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversioncontrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.7777777/Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ContentsSafety...........................................................7About your device...........................................................7Network services.............................................................8Battery removing............................................................8Nokia E71 in brief.........................................9Key features.....................................................................9Keys and parts...............................................................10Set up your device......................................12Insert the SIM card and battery...................................12Charge the battery........................................................13Insert the memory card................................................13Eject the memory card..................................................14Connect the headset.....................................................14Attach the wrist strap...................................................14Antennas........................................................................14Get started.................................................15First start-up..................................................................15Home screen..................................................................15Menu...............................................................................16Transfer content from other devices .........................16Display indicators..........................................................17Common actions in several applications....................18Find items......................................................................19Lock the keys.................................................................19Volume control..............................................................19Memory..........................................................................19Write text.......................................................................21Further information......................................................22New from Eseries.......................................23Access tasks quickly......................................................23Home screen..................................................................23One-touch keys..............................................................24Nokia Calendar for Eseries............................................25Nokia Contacts for Eseries............................................27Multitasking...................................................................28Phone.........................................................29Voice calls.......................................................................29Speed dialling................................................................30Voice mail......................................................................30Voice aid.........................................................................30Voice commands...........................................................31Push to talk....................................................................32Log..................................................................................32Messaging..................................................34Messaging folders.........................................................34E-mail messages............................................................35Write and send text messages....................................37Multimedia messages...................................................37Instant messaging........................................................38Messaging settings.......................................................39Internet......................................................43Web................................................................................43Browse the intranet .....................................................45CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Download!......................................................................45Internet access points..................................................45Connect PC to web.........................................................46Travelling...................................................47About GPS and satellite signals...................................47Positioning settings......................................................48Maps...............................................................................48GPS data.........................................................................50Landmarks.....................................................................51Nokia Office Tools......................................52Active notes ..................................................................52Calculator.......................................................................52File manager..................................................................53Quickoffice.....................................................................53Converter........................................................................53Zip manager...................................................................54PDF reader......................................................................54Printing .........................................................................54Clock...............................................................................55Notes..............................................................................56Chinese-English bilingual dictionary...........................56Media..........................................................58Camera...........................................................................58Music player...................................................................59Gallery............................................................................60Personalisation..........................................62Profiles...........................................................................62Select ringing tones......................................................62Personalise the home screen.......................................63Change the display theme............................................63Connectivity...............................................64Connectivity security.....................................................64Data cable......................................................................64Bluetooth.......................................................................65Modem...........................................................................67Connection manager....................................................67Security and data management................69Lock the device..............................................................69Memory card security...................................................69Encryption......................................................................70Fixed dialling.................................................................70Certificate manager......................................................71Back up data..................................................................72Application manager....................................................72Data synchronisation....................................................73Mobile VPN.....................................................................74Settings......................................................76General settings............................................................76Telephone settings.......................................................79Connection settings......................................................79Application settings......................................................81Shortcuts....................................................82General shortcuts..........................................................82Nokia original enhancements...................83Battery............................................................................83Battery and charger information...............84Battery and charger information................................84Nokia battery authentication guidelines...................85CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Care and maintenance...............................87........................................................................................87Additional safety information...................89Small children................................................................89Operating environment................................................89Medical devices..............................................................89Vehicles..........................................................................90Potentially explosive environments............................90Emergency calls.............................................................91Certification information (SAR)....................................91MANUFACTURER’S LIMITED WARRANTY........93Warranty period............................................................93How to get warranty service........................................94What is not covered?....................................................94Other important notices...............................................95Limitation of Nokia's liability.......................................96Statutory obligations....................................................96How to obtain an English Nokia E71 UserGuide..........................................................97Index..........................................................98CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SafetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it maycause interference or danger.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN RESTRICTED AREASFollow any restrictions. Switch the device offin aircraft, near medical equipment, fuel,chemicals, or blasting areas.QUALIFIED SERVICEOnly qualified personnel may install orrepair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.About your deviceThe wireless device described in this guide is approvedfor use on the (E)GSM 850, 900, 1800, and 1900networks. Contact your service provider for moreinformation about networks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimaterights of others, including copyrights.Copyright protection may prevent some images, music,and other content from being copied, modified, ortransferred.Your device supports several methods of connectivity.Like computers, your device may be exposed to virusesand other harmful content. Exercise caution withmessages, connectivity requests, browsing, anddownloads. Only install and use services and othersoftware from trustworthy sources that offer adequatesecurity and protection against harmful software, suchas applications that are Symbian Signed or have passedthe Java Verified™ testing. Consider installing antivirus 7CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
and other security software on your device and anyconnected computer.Your device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose toaccess such sites, you should take precautions forsecurity or content.Warning: To use any features in this device, otherthan the alarm clock, the device must be switched on.Do not switch the device on when wireless device usemay cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.Remember to make back-up copies or keep a writtenrecord of all important information stored in yourdevice.When connecting to any other device, read its userguide for detailed safety instructions. Do not connectincompatible products.The images in this guide may differ from your devicedisplay.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as e-mail, browsing, and multimediamessaging (MMS), require network support for thesetechnologies.Battery removingAlways switch the device off and disconnect thecharger before removing the battery.8CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Nokia E71 in briefModel number: Nokia E71.Key featuresYour new Eseries device helps you manage yourbusiness and personal information. Some of the keyfeatures are highlighted here:Read and reply to your e-mail while on themove.Stay up-to-date and plan your meetings withCalendar.Manage your business partners and free timefriends with the new Contacts application.Work with documents, spreadsheets, andpresentations with Quickoffice.Add new business applications to yourEseries device with Download!.Find points of interest with Maps.Switch from business to personal mode.Edit the appearance and setup of your homescreen with Modes.Browse your company intranet withIntranet.Move your contact and calendar informationfrom a previous device to your Nokia E71with Switch.When you see this icon in the home screen,Contacts, or Calendar, scroll right to access alist of available actions.9CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Keys and parts1 — Earpiece2 — Light sensor3 — Navi™ scroll key. Press the scroll key to enter aselection, to scroll left, right, up, and down on thedisplay. A long press of the scroll key left, right, up, ordown accelerates the scrolling.4 — Selection key. Press the selection key to performthe function shown above it on the display.5 — Call key6 — Microphone7 — Charger connector8 — Power key9 — Selection key10 — End key. Press the end key to reject a call, endactive calls and held calls, and with a long keypress, enddata connections.11 — Backspace key12 — Enter key1 — Home key2 — Contacts key3 — Calendar key4 — E-mail key1 — Function key. To insert digits or characters printedat the top of keys, press and hold the function key andpress the corresponding key, or press and hold thecorresponding key only. To enter only the charactersprinted at the top of keys, press the function key twicequickly.2 — Shift key. To switch between the differentcharacter cases, press the shift key.3 — Chr key. When writing text, press the chr key toinsert characters not shown on the keypad. To accessthe shortcuts behind the ctrl key, such as ctrl + c, press10CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
the function key and the chr key to enter ctrl, and thenpress the desired key, for example c.11CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Set up your deviceSet up your Nokia E71 following these instructions.Insert the SIM card andbattery1. Press the release buttons and lift the back cover off.2. If the battery is inserted, lift the battery in thedirection of the arrow to remove it.3. Insert the SIM card. Make sure that the contact areaon the card is facing the connectors on the deviceand that the bevelled corner is facing the top of thedevice.4. Insert the battery. Align the contacts of the batterywith the corresponding connectors on the batterycompartment and insert in the direction of thearrow.12CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
5. Close the back cover.Charge the battery1. Connect a compatible charger to a wall outlet.2. Connect the power cord to the device. If the batteryis completely discharged, it may take a while beforethe charging indicator starts scrolling.3. When the battery is fully charged, disconnect thecharger from the device, then from the wall outlet.Your battery has been precharged at the factory, butthe charging levels may vary. To reach the fulloperation time, charge the battery until it has beenfully charged according to the battery level indicator.Insert the memorycardThe sales package of your device may not include amemory card. Memory cards are available as separateenhancements.1. Open the cover of the memory card slot.2. Insert the memory card in the slot with the contactarea first. Make sure that the contact area is facingthe connectors on the device.3. Push the card in until it locks into place.4. Close the cover.13CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well as thedevice, and data stored on the card may be corrupted.1. Press the power key briefly, and select Removememory card.2. Open the cover of the memory card slot.3. Press the end of the memory card to release it fromthe memory card slot.4. Close the cover.Connect the headsetWarning: When you use the headset, your abilityto hear outside sounds may be affected. Do not use theheadset where it can endanger your safety.Connect the compatible headset to the headsetconnector of your device.Attach the wrist strapThread the wrist strap as shown, andtighten it.AntennasYour device may have internal and external antennas.As with any radio transmitting device, avoid touchingthe antenna area unnecessarily while the antenna istransmitting or receiving. Contact with such anantenna affects the communication quality and maycause the device to operate at a higher power levelthan otherwise needed and may reduce the batterylife.14CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Get startedAfter you have set up your device, switch it on and startto explore what is new in Eseries.First start-up1. Press and hold the power key untilyou feel the device vibrate.2. If prompted, enter the PIN code orlock code, and select OK.3. When prompted, enter the country inwhich you are located and the currentdate and time. To find your country,enter the first letters of the countryname. It is important to select thecorrect country, because scheduledcalendar entries may change if youchange the country later and the newcountry is located on a different time zone.4. The Welcome application opens. Select from thevarious options, or select Exit to close theapplication.To configure the various settings in your device, usethe wizards available on the home screen and theSettings wizard application. When you switch thedevice on, it may recognise the SIM card provider andconfigure some settings automatically. You can alsocontact your service provider for the correct settings.You can switch the device on without inserting a SIMcard. The device starts up in the offline mode, and youcannot use the network-dependent phone functions.To switch the device off, press and hold the power key.Home screenFrom the home screen you can quickly access featuresthat you use the most, and see at a glance any missedcalls or new messages.You can define two separate home screens for differentpurposes, such as one screen to show your business e-mail and notifications, and another to show yourpersonal e-mail. This way, you do not have to seebusiness-related messages outside office hours. 15CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MenuSelect Menu.The menu is astarting point fromwhich you can openall applications inthe device or on amemory card.The menu containsapplications andfolders, which aregroups of similarapplications. Allapplications you install in the device yourself are bydefault saved in the Installations folder.To open an application, scroll to it, and press the scrollkey.To view the applications in a list, select Options >Change Menu view > List. To return to the grid view,select Options > Change Menu view > Grid.To view the memory consumption of differentapplications and data stored on the device or memorycard and to check the amount of free memory, selectOptions > Memory details.To create a new folder, select Options > Newfolder.To rename a new folder, select Options > Rename.To rearrange the folder, scroll to the application youwant to move, and select Options > Move. A checkmark is placed beside the application. Scroll to a newlocation, and select OK.To move an application to a different folder, scroll tothe application you want to move, and selectOptions > Move to folder, the new folder, and OK.To download applications from the web, selectOptions > Download applications.Transfer content fromother devices Select Menu > Tools > Switch.You can transfer content, such as contacts, from acompatible Nokia device to your new Eseries deviceusing different connectivity methods. The type ofcontent that can be transferred depends on the devicemodel. If the other device supports synchronisation,you can also synchronise data between the two devicesor send data from this device to the other device.When you transfer data from your previous device, itmay require you to insert the SIM card. Your new Eseriesdevice does not need a SIM card when transferringdata.Content is copied from the memory of the other deviceto the corresponding location in your device. Copyingtime depends on the amount of data to be transferred.You can also cancel and continue later.The necessary steps for data transfer may varydepending on your device, and whether you have16CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
interrupted data transfer earlier. The items that youcan transfer vary depending on the other device.Transfer content betweendevicesTo connect the two devices, follow the instructions onthe display. For some device models, the Switchapplication is sent to the other device as a message. Toinstall Switch on the other device, open the message,and follow the instructions on the display. On your newEseries device, select the content you want to copyfrom the other device.After the data transfer, you can save the shortcut withthe transfer settings to the main view to repeat thesame transfer later. To edit the shortcut, selectOptions > Shortcut settings.Display indicatorsThe device is being used in a GSM network(network service). The bar next to the iconindicates the signal strength of the network atyour current location. The higher the bar, thestronger the signal.The battery charge level. The higher the bar,the stronger the charge in the battery.You have one or more unread messages in theInbox folder in Messaging.You have received new e-mail in the remotemailbox.There are messages waiting to be sent in theOutbox folder in Messaging.You have one or more missed phone calls.The keys of the device are locked.An alarm is active.The ringing type is set to silent.Bluetooth is active.Data is being transmitted using Bluetoothconnectivity. When the indicator is blinking,your device is trying to connect with anotherdevice.An infrared connection is active. If the indicatorblinks, your device is trying to connect to theother device, or the connection has been lost.A GPRS packet data connection is available(network service). If the icon is , theconnection is active. If the icon is , theconnection is on hold.17CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
An EGPRS packet data connection is available(network service). If the icon is , theconnection is active. If the icon is , theconnection is on hold.Your device is connected to a computer with aUSB data cable.All calls are forwarded to another number.A headset is connected to the device.The connection to a headset with Bluetoothconnectivity has been lost.A hands-free car kit is connected to the device.A loopset is connected to the device.A text phone is connected to the device.Your device is synchronising.Common actions inseveral applicationsYou can find the following actions in severalapplications:To change the profile, or switch off or lock the device,press the power key briefly.If an applicationconsists of severaltabs (see figure),open a tab byscrolling right orleft.To save the settingsthat you haveconfigured in anapplication, selectBack.To save a file, select Options > Save. There aredifferent saving options depending on the applicationyou use.To send a file, select Options > Send. You can send afile in an e-mail or multimedia message, or usingdifferent connectivity methods.To copy, press and hold the shift key, and select the textwith the scroll key. Press and hold the shift key, andselect Copy. To paste, scroll to where you want to pastethe text, press and hold the shift key, and selectPaste. This method may not work in applications thathave their own copy and paste commands.To select different items, such as messages, files, orcontacts, scroll to the item you want to select. SelectOptions > Mark/Unmark > Mark to select one itemor Options > Mark/Unmark > Mark all to select allitems.Tip: To select almost all items, first selectOptions > Mark/Unmark > Mark all, then18CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
select the items you do not want, and Options >Mark/Unmark > Unmark.To select an object (for example, an attachment in adocument) scroll to the object so that square markersappear on each side of the object.Find itemsWhen a search field is available in the application, youcan use the search field to search for a name, file, orapplication.1. To search for an item, enter text in the search field.The device will immediately start to search andfilter the entries matching to the text you input. Themore texts you input, the more accurate the searchresult will be. When entering text, use the inputmethods included in your device. The current inputmethod indicator will be shown in the search fieldnear the magnifier icon.2. After finding your needed item, press the scroll keyto open it.Lock the keysWhen the device or keypad is locked, calls may bepossible to the official emergency numberprogrammed into your device.The keypad of your device locks automatically toprevent the keys from being accidentally pressed. Tochange the period after which the keypad is locked,select Menu > Tools > Settings > General >Security > Phone and SIM card > Keypad autolockperiod.To lock the keys manuallyin the home screen, pressthe left selection key andthe function key.To lock the keys manuallyin the menu or in an openapplication, press thepower key briefly, andselect Lock keypad.To unlock the keys, pressthe left selection key andthe function key.Volume controlTo adjust the earpiece volume during a phone call orthe volume of the media applications, use the volumekeys.MemoryThere are two types of memory into which you can savedata or install applications: device memory andmemory card.19CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Free memoryTo see how much memory is currently in use, howmuch free memory remains, and how much memory isconsumed by each data type, select Menu >Options > Memory details > Phone memory orMemory card.Tip: To ensure that you have adequate memory,transfer data regularly to a memory card orcomputer, or use File manager to delete files youno longer need.After you install applications to a compatible memorycard, installation files (.sis, .sisx) remain in the devicememory. The files may use large amounts of memoryand prevent you from storing other files. To maintainsufficient memory, use Nokia PC Suite to back upinstallation files to a compatible PC, then use the filemanager to remove the installation files from thedevice memory. If the .sis file is a message attachment,delete the message from the Messaging inbox.Memory cardSelect Menu > Tools > Memory.If you cannot use a memory card in your device, youmay have the wrong type of memory card, the card maynot be formatted for your device, or the card has acorrupted file system. Your Nokia device supports theFAT16 and FAT32 file system for memory cards.MicroSDHCThis device uses microSD and microSDHCmemory cards.To ensure interoperability, use onlycompatible memory cards with this device.Check the compatibility of a memory card withits manufacturer or provider. Other memorycards than microSD and microSDHC cards are notcompatible with this device. Using an incompatiblememory card may damage the memory card as well asthe device, and data stored on the incompatible cardmay be corrupted.Use a memory cardTo format a memory card for your device, selectOptions > Format memory card. When a memorycard is formatted, all data on the card is lostpermanently. Consult your retailer to find out if youmust format the memory card before you can use it.To change the name of the memory card, selectOptions > Memory card name.You can protect a memory card with a password toprevent unauthorised access. To set a password, selectOptions > Set password. The password can be up toeight characters long and is case-sensitive. Thepassword is stored in your device. You do not need toenter it again while you use the memory card in thesame device. If you use the memory card in anotherdevice, you are asked for the password. Not all memorycards support password protection.To remove the memory card password, selectOptions > Remove password. When you remove the20CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
password, the data on the memory card is notprotected against unauthorised use.To open a locked memory card, select Options >Unlock memory card. Enter the password.Write textThe input methods provided in the device may varyaccording to different sales markets.KeyboardYour device has a full keyboard. The most commonpunctuation marks can be found from the keypad.Alternatively, you can input the punctuation marks byusing some key combinations.Some characters (for example, some punctuationmarks and other symbols) are marked in grey on thekey. To insert a marked in grey character, press thefunction key and the key that has the character that youwant.To insert a number, press the function key, so that is shown on the display, and then press the key withthe number marked in grey background. To lock thefunction key and insert only numbers, press thefunction key twice so that is shown on the display.To erase a character, press . Press and hold to clearmore than one character.To open a list of special characters, press the functionkey and the key. Use the scroll key to scroll throughthe list and select a character.To use other keys (for example, "A" or "O") to insert acharacter, press and hold the key and then press theother key as many times as needed, until the desiredcharacter is shown.To switch between the different character cases, pressthe key, so that is shown on the display., and indicate the selected case.Copy and paste text1. To select letters and words, press and hold . Atthe same time, scroll in the direction necessary tohighlight the word, phrase, or line of text you wantto copy. As the selection moves, the text ishighlighted.2. To copy the text to the clipboard, press the functionkey + + C. To paste the text, press the functionkey + + V.Tip: You can also select from the list ofoptions. For example, to copy the text to theclipboard, select the text, then Options >Editing options > Copy.Change the writinglanguageWhen you write text, you can change the writinglanguage. Select Options > Input options >Writing language, and the writing language that youwant. When you are writing text, press the function keyand press and hold the key and another key as manytimes as needed to input a special character. Changing21CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
the writing language allows you to access differentcharacters.For example, if you are writing text in Chinese and wantto use Latin characters to add a name, select Options >Input options > Writing language, and the writinglanguage that allows you to use Latin characters.Switch input methodsTo switch input methods, press and hold + thefunction key, and press the key repeatedly at thesame time, until the symbol for the desired inputmethod is shown on the display, or press and toselect a different input method.Further informationExtended user guideAn extended version of this user guide is available onthe Nokia web site. Some applications or functions areexplained only in the extended user guide.Instructions in your deviceTo read instructions for the current view of the openapplication, select Options > Help.To browse the help topics and conduct searches, selectMenu > Help > Help. You can select categories forwhich you want to see instructions. Select a category,such as Messaging, to see what instructions (helptopics) are available. While you are reading the topic,scroll left or right to see the other topics in thatcategory.To switch between the application and help, press andhold the home key.TutorialThe tutorial provides you information about yourdevice and shows you how to use it. Select Menu >Help > Tutorial.22CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
New from EseriesYour new Eseries device contains new versions of theCalendar and Contacts applications, as well as a newhome screen.Access tasks quicklyWhenever you seethe icon on thehome screen, or inthe Contacts orCalendarapplications, scrollright to access a listof available actions.To close the list,scroll left.When you navigate in these applications, to go back tothe previous level, scroll left.Home screenFrom the home screen you can quickly access featuresthat you use the most, and see at a glance any missedcalls or new messages.Navigate in the home screenTo access the home screen, press the home key briefly.The home screenconsists of:•applicationshortcuts (1) Toaccess anapplicationquickly, scroll toits shortcut andpress the scrollkey.•information area (2) To check an item displayed inthe information area, scroll to the item and pressthe scroll key.•notifications (3) To view the notifications, scroll toa box. Each box is only visible if there are items in it.To hide the boxes, press the backspace key.To define what kind of items and shortcuts you wantto see on the home screen, and to set the appearanceof the home screen, select Menu > Tools > Modes.23CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Work on the home screenTo check your received messages, scroll to the messagebox in the notification area. To read a message, scrollto it and press the scroll key. To access other tasks,scroll right.To view your missed calls, scroll to the calls box in thenotification area. To return a call, scroll to a call andpress the call key. To send a text message to a caller,scroll to a call, scroll right and select Send text msg.from the list of available actions.To listen to your voice mail, scroll to the voice mail boxin the notification area. Scroll to the desired voicemailbox and press the call key to call it.Switch home screensYou can define two home screen modes for differentpurposes, such as one mode to show your business e-mail and notifications, and another to show yourpersonal e-mail. This way, you do not have to seebusiness-related messages outside office hours.Your operator may have set you a third home screenwith operator-specific items.To change from one home screen mode to another,scroll to and press the scroll key.One-touch keysWith the One-touch keys you can access applicationsand tasks quickly. Each key has been assigned anapplication and a task. To change these, select Menu >Tools > Settings > General > Personalisation >One-touch keys. Your network operator may haveassigned applications to the keys, in which case youcannot change them.Home keyTo access the home screen, press the home key briefly.Press the home key briefly again to access the menu.To view the list of active applications, press the homekey for a few seconds. When the list is open, press thehome key briefly to scroll the list. To open the selectedapplication, press the home key for a few seconds, orpress the scroll key. To close the selected application,press the backspace key.Leaving applications running in the backgroundincreases the demand on battery power and reducesthe battery life.Contacts keyTo open the Contacts application, press the contactskey briefly.To create a new contact, press the contacts key for afew seconds.Calendar keyTo open the Calendar application, press the calendarkey briefly.To create a new meeting entry, press the calendar keyfor a few seconds.24CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
E-mail keyTo open your default mailbox, press the e-mail keybriefly.To create a new e-mail message, press the e-mail keyfor a few seconds.Nokia Calendar forEseriesSelect Menu > Office > Calendar.Create and view scheduled events and appointments,and switch between different calendar views.The device functions that display names use the phonenumber that most closely matches. If less than 7 digitsmatch, the name displayed may not be correct.Calendar viewsYou can switch between the following views:•Month view shows the current month and thecalendar entries of the selected day in a list.•Week view shows the events for the selected weekin seven day boxes.•Day view shows the events for the selected daygrouped into time slots according to their startingtime.•To-do view shows all to-do items.•Agenda view shows the events for the selected dayin a list.To change the view, select Options > Change viewand the desired view.Tip: To open the week view, scroll to a weeknumber and press the scroll key.To move to the next or the previous day in month,week, day, and agenda views, scroll right or left.To change the default view, select Options >Settings > Default view.View calendar informationIn the month view,calendar entries aremarked with atriangle.Anniversary entriesare also markedwith anexclamation mark.The entries of theselected day areshown in a list.To open calendar entries, open a calendar view, scrollto an entry, and press the scroll key.Create calendar entriesYou can create the following types of calendar entries: 25CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Meeting entries remind you of events that have aspecific date and time.•Memo entries are related to the whole day but notto a specific time of the day.•Anniversary entries remind you of birthdays andspecial dates. They refer to a certain day but not aspecific time of the day. Anniversary entries arerepeated every year.•To-do entries remind you of a task that has a duedate but not a specific time of the day.To create a calendar entry, scroll to a date, selectOptions > New entry and the entry type.Tip: To create a meeting entry, start enteringthe subject.Create meeting, memo, anniversary, or to-doentries1. Enter the subject.2. For meeting entries, enter the start and end times,or select All-day event.3. For meeting and memo entries, enter the start andend dates. For anniversary entries, enter the dateand for to-do entries, enter the due date.4. For meeting entries, enter the location.5. For meeting, anniversary, and to-do entries, youcan set an alarm.6. For recurring meeting entries, set the recurrencetime.7. For to-do entries, set the priority. To set the priorityfor meeting entries, select Options > Priority.8. For memo, anniversary, and to-do entries, definehow the entry is handled during synchronisation.Select Private to hide the entry from viewers if thecalendar is available online, Public to make theentry visible to viewers, or None to not copy theentry to your computer.9. Enter a description.To send the entry, select Options > Send.Calendar settingsSelect Options > Settings.To change the alarm tone, select Calendar alarmtone.To change the view displayed when you open thecalendar, select Default view.To change the first day of the week, select Week startson.To change the week view title, select Week viewtitle and Week number or Week dates.Lunar calendarTo use the Lunar calendar function, the devicelanguage must be Chinese.To view detailed Lunar calendar information of thecurrently highlighted date:1. In calendar views, select Options > View lunardata, and set Lunar calendar item as on.26CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
2. When you go back to the calendar views, Lunarinformation is displayed in the control bar. To viewmore detailed Lunar information in a pop-upwindow, select Options > View lunar data. Thisoption is displayed only when the Lunar calendarsetting item is on.Nokia Contacts forEseriesSelect Menu > Communic. > Contacts.Save and update contact information, such as phonenumbers, home addresses, or e-mail addresses of yourcontacts. You can add a personal ringing tone or athumbnail image to a contact. You can also createcontact groups, which allow you to communicate withseveral contacts at the same time, and send contactinformation (business cards) to or receive it fromcompatible devices.Whenever you see the icon, scroll right to access alist of available actions. To close the list, scroll left.Add contactsSelect Options > New contact, and enter thecontact's information.To copy a contact's information from the memory card,select Options > Copy > From memory card.Contact groupsSelect each contact you want to add to the contactgroup, select Options > Mark/Unmark > Mark tomark it, select Options > Group > Add to group >Create new group > Group name, and enter a namefor the group.If you want to make conference calls to the group,define also the following:•Conf. service number — Enter the conference callservice number.•Conf. service ID — Enter the conference call IDnumber.•Conf. service PIN — Enter the conference call PINcode number.To make a conference call to the group, select thegroup, scroll right, and select Call conf. service fromthe list of available actions.Search for contactsTo search for contacts, start entering the contact'sname in the search field.Manage contacts directoriesYou can install contacts directories from the Download!application.To change the contacts directory, scroll to the top ofthe names list, press the scroll key, and select from thelist of available directories. 27CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To organise contacts directories, select Options >Organise contact lists and a directory. Scroll up tomove it to the desired place.Add ringing tones forcontactsYou can set a ringing tone for a contact or contactgroup. The ringing tone sounds when the contact callsyou.To add a ringing tone for contacts, open a contact,select Options > Ringing tone and a ringing tone.To add a ringing tone for contact groups, select acontact group, Options > Group > Ringing tone anda ringing tone.To remove the assigned ringing tone, select Defaulttone from the list of ringing tones.MultitaskingYou can have several applications open at the sametime. To switch between active applications, press andhold the home key, scroll to an application, and pressthe scroll key. To close the selected application, pressthe backspace key.Example: When you have an active phone calland want to check your calendar, press the homekey to access the menu, and open the Calendarapplication. The phone call remains active in thebackground.Example: When you are writing a message andwant to check a web site, press the home key toaccess the menu, and open the Web application.Select a bookmark or enter the web addressmanually, and select Go to. To return to yourmessage, press and hold the home key, scroll tothe message and press the scroll key.28CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
PhoneTo make and receive calls, the device must be switchedon, the device must have a valid SIM card installed, andyou must be located in the service area of a cellularnetwork.Voice callsNote: The actual invoice for calls and services fromyour service provider may vary, depending on networkfeatures, rounding off for billing, taxes, and so forth.Answer a callTo answer a call, press the call key.To reject a call, press the end key.To mute the ringing tone instead of answering a call,select Silence.When you have an active call and the call waitingfunction (network service) is activated, press the callkey to answer a new incoming call. The first call is puton hold. To end the active call, press the end key.Make a callImportant: If the device has been locked, enter thelock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requiresthat the device recognise the number to be an officialemergency number. It is advisable to change theprofile or unlock the device by entering the lock codebefore you make the emergency call.To make a call, enter the phone number, including thearea code, and press the call key.Tip: For international calls, add the + characterthat replaces the international access code, andenter the country code, area code (omit theleading 0, if necessary), and phone number.To end the call or cancel the call attempt, press the endkey.To make a call using the saved contacts, press thecontacts key. Enter the first letters of the name, scrollto the name, and press the call key. See "Nokia Contactsfor Eseries", p. 27.To make a call using the log, press the call key to viewup to 20 numbers that you last called or attempted to 29CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
call. Scroll to the desired number or name, and pressthe call key.To adjust the volume of an active call, use the volumekeys.Make a conference call1. To make a conference call, enter a participant'sphone number, and press the call key.2. When the participant answers, select Options >New call.3. When you have made a phone call to all theparticipants, select Options > Conference tomerge the calls into a conference call.To mute the microphone of your device during the call,select Options > Mute.To drop a participant from the conference call, scroll tothe participant, and select Options > Conference >Drop participant.To discuss privately with a conference call participant,scroll to the participant, and select Options >Conference > Private.Speed diallingSelect Menu > Tools > Settings > Phone > Call >Speed dialling > On.Speed dialling allows you to make a call by pressingand holding a number key when in the home screen.To assign a number key to a phone number, selectMenu > Communic. > Speed dial. Scroll to thenumber key (2 - 9) on the display, and select Options >Assign. Select the desired number from Contacts.To delete the phone number assigned to a number key,scroll to the speed dialling key, and select Options >Remove.To modify a phone number assigned to a number key,scroll to the speed dialling key, and select Options >Change.Voice mailSelect Menu > Communic. > Call mailbox.When you open the Voice mail application for the firsttime, you are asked to enter the number of your voicemailbox.To call your voice mail, select Options > Call voicemailbox.To call your voice mail when in the home screen, pressand hold 1; or press 1 and then the call key.To change the voice mailbox number, select themailbox and Options > Change number.Voice aidSelect Menu > Tools > Voice aid.The Voice aid application reads text on the display,allowing you to use the basic functions of your devicewithout looking at the display.30CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To hear the entries in your contacts list, selectContacts. Do not use this option if you have more than500 contacts.To hear information on your missed and received calls,dialled numbers, and frequent calls, select Recentcalls.To listen to your voice messages, select Voicemailbox.To dial a telephone number, select Dialler.To use voice commands to make a phone call, selectVoice commands.To have your received messages read aloud, selectMessage reader.To hear the current time, select Clock. To hear thecurrent date, scroll down.If the Voice aid application is open when a calendaralarm is due, the application reads the calendar alarmcontent aloud.To hear more options, select Options.Voice commandsSelect Menu > Tools > Voice comm..Use voice commands to make phone calls and launchapplications, profiles, or other functions on the device.The device creates a voice tag for the entries in Contactsand for the functions designated in the Voicecommands application. When a voice command isspoken, the device compares the spoken words to thevoice tag in the device. Voice commands are notdependent on a speaker’s voice; however, the voicerecognition in the device adapts to the main user’svoice to recognise voice commands better.Make a callA voice tag for a contact is the name or nickname thatis saved on the contact in Contacts.Note: Using voice tags may be difficult in a noisyenvironment or during an emergency, so you shouldnot rely solely upon voice dialing in all circumstances.To listen to a voice tag, open a contact, and selectOptions > Play voice tag.1. To make a call using a voice command, press andhold the voice key.2. When you hear the tone or see the visual display,clearly speak the name saved on the contact.3. The device plays a synthesised voice tag for therecognised contact in the selected device language,and displays the name and number. After a timeoutof 1.5 seconds, the device dials the number. If therecognised contact was not correct, select Next toview a list of other matches or Quit to canceldialling.If several numbers are saved under the contact, thedevice selects the default number, if it has been set.Otherwise, the device selects the first availablenumber of the following fields: Mobile, Mobile(home), Mobile (business), Telephone, Tel.(home), and Tel. (business).31CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Push to talkSelect Menu > Communic. > PTT.Push to talk (PTT) (network service) provides directvoice communication connected with the push of a key.With PTT, you can use your device as a walkie-talkie:one person talks while the others listen through thebuilt-in loudspeaker. Users take turns responding toeach other. Because only one user can talk at a time,the maximum duration of a speech turn is limited. Fordetails of the speech turn duration, contact yourservice provider.Warning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.LogSelect Menu > Log.Log stores information about the communicationhistory of the device. The device registers missed andreceived calls only if the network supports thesefunctions, the device is switched on and within thenetwork service area.Call and data registersTo view recently missed, received, and dialled calls,select Recent calls.Tip: To open Dialled numbers when in thehome screen, press the call key.To view the approximate duration of calls to and fromyour device, select Call duration.To view the amount of data transferred during packetdata connections, select Packet data.Monitor all communicationsTo monitor all voice calls, text messages, or dataconnections registered by the device, open the generallog tab.To view detailed information about a communicationevent, scroll to it, and press the scroll key.Tip: Subevents, such as a text message sent inmore than one part and packet dataconnections, are logged as one communicationevent. Connections to your mailbox, multimediamessaging centre, or web pages are shown aspacket data connections.To add the phone number from a communication eventto Contacts, select Options > Save to Contacts, andselect to create a new contact or to add the phonenumber to an existing contact.To copy the number, for example to paste it to a textmessage, select Options > {No display_textmapping for 'qtn_dlogs_cmd_copy_number.logs',locale='en'}.To view a single type of communication event orcommunication events with one other party, selectOptions > Filter, and select the desired filter.32CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To erase the contents of the log, recent calls register,and messaging delivery reports permanently, selectOptions > Clear log.33CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MessagingSelect Menu > Communic. > Messaging.In Messaging (network service), you can send andreceive text messages, multimedia messages, audiomessages, and e-mail messages. You can also receiveweb service messages, cell broadcast messages, andspecial messages containing data, and send servicecommands.Before sending or receiving messages, you may needto do the following:•Insert a valid SIM card in the device and be locatedin the service area of a cellular network.•Verify that the network supports the messagingfeatures you want to use and that they are activatedon your SIM card.•Define the internet access point settings on thedevice. See "Internet access points", p. 45.•Define the e-mail account settings on the device. See"E-mail account settings", p. 40.•Define the text message settings on the device. See"Text message settings", p. 39.•Define the multimedia message settings on thedevice. See "Multimedia messagesettings", p. 39.The device may recognise the SIM card provider andautomatically configure some of the message settings.If not, you may need to define the settings manually;or contact your service provider to configure thesettings.Messaging foldersMessages and data received using Bluetoothconnectivity are stored in the Inbox folder. E-mailmessages are stored in Mailbox. Messages that youhave been writing can be stored in the Drafts folder.Messages that are waiting to be sent are stored in theOutbox folder, and messages that have been sent,excluding Bluetooth messages, are stored in the Sentfolder.Tip: Messages are placed in Outbox, forexample, when your device is outside networkcoverage. You can also schedule e-mailmessages to be sent the next time you connectto your remote mailbox.Note: The message sent icon or text on your devicescreen does not indicate that the message is receivedat the intended destination.To request the network to send you a delivery reportof the text messages and multimedia messages youhave sent (network service), select Options >34CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Settings > Text message or Multimediamessage > Receive report. The reports are saved inthe Reports folder.E-mail messagesSelect Menu > Messaging > Mailbox.To receive and send e-mail, you must have a remotemailbox service. This service may be offered by aninternet service provider, a network service provider,or your company. Your device is compliant withinternet standards SMTP, IMAP4 (revision 1), and POP3,and with different vendor-specific e-mail solutions.Other e-mail providers may offer services with differentsettings or features than those described in this userguide. Contact your e-mail provider or service providerfor more details.Before you can send, receive, retrieve, reply to, andforward e-mail on your device, you must also do thefollowing:•Configure an internet access point.•Set up an e-mail account, and define the e-mailsettings correctly. To do this, use the mailbox guide,or define the account manually.Contact your service provider for the correct settings.Set up your e-mailWith the e-mail wizard, you can set up your businesse-mail account, such as Microsoft Outlook, or MicrosoftExchange; and internet e-mail account, such as Googlee-mail services.1. To start the e-mail wizard, go to the home screen,scroll to the e-mail wizard, and press the scroll key.2. Enter your e-mail address and password. If thewizard is not able to configure your e-mail settingsautomatically, select your e-mail account type andenter the related settings.If your device contains any additional e-mail clients,those are offered to you when you start the e-mailwizard.When setting up your e-mail, you may be prompted foryour user name, E-mail type, incoming mail server,incoming mail server port, outgoing mail server,outgoing mail server port, password and access point.If you are setting up your business e-mail, ask yourcompany IT department for details. If you are settingup your internet e-mail, see your e-mail serviceprovider’s website for details.Connect to a remote mailboxE-mail addressed to you is not automatically receivedby your device, but by your remote mailbox. To readyour e-mail, you must first connect to the remotemailbox; then select the e-mail messages you wish toretrieve into your device.1. To retrieve received e-mail messages to your deviceand view them, select your mailbox in theMessaging main view. When the device asksConnect to mailbox?, select Yes.2. Enter your user name and password, if prompted.3. Select Options > Retrieve e-mail > New toretrieve new messages that you have neither read 35CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
nor retrieved, Selected to retrieve only messagesyou select from the remote mailbox, or All toretrieve all messages not previously retrieved.4. To manage your e-mail offline to save in connectioncosts and work in conditions that do not allow adata connection, select Options > Disconnect todisconnect from the remote mailbox. Any changesyou make in the remote mailbox folders whileoffline, take effect in your remote mailbox the nexttime you go online and synchronise.Read and reply to e-mailImportant: Exercise caution when openingmessages. Messages may contain malicious softwareor otherwise be harmful to your device or PC.To read a received e-mail, open it from the mailbox.To open an attachment, select Options >Attachments. Scroll to the attachment, and press thescroll key.To reply only to the sender of an e-mail, selectOptions > Reply > To sender.To reply to all recipients of an e-mail, select Options >Reply > To all.Tip: If you reply to an e-mail that containsattached files, the attachments are not includedin the reply. If you forward the received e-mail,the attachments are included.To forward an e-mail, select Options > Forward.To attach a file to an e-mail message, select Options >Insert and the attachment you want to add.To delete an attachment from an e-mail that you aresending, select the attachment and Options >Remove.To set the message priority, select Options > Sendingoptions > Priority.To set the sending time for the e-mail message, selectOptions > Sending options > Send message.Select Immediately, or select When conn. avail. ifyou are working offline.To call the sender of the e-mail message, if the sendercan be found in Contacts, select Options > Call.To reply to the sender of the e-mail with an audiomessage or multimedia message, select Options >Create message.Write and send e-mail1. To write an e-mail, select New message > E-mail.2. Select Options > Add recipient to select therecipients' e-mail addresses from Contacts, or enterthe e-mail addresses in the To field. Use a semicolonto separate entries. Use the Cc field to send a copyto other recipients, or the Bcc field to send a blindcopy to recipients.3. In the Subject field, enter the subject of the e-mail.4. Enter your e-mail message in the text area, andselect Options > Send.36CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Delete messagesTo free up memory space on your device, regularlydelete messages from the Inbox and Sent folders, anddelete retrieved e-mail messages.To delete e-mail from the device only, and keep theoriginal on the server, select Options > Delete >Phone (header remains).To delete e-mail both from the device and the remoteserver, select Options > Delete > Phone andserver.To cancel the deleting, select Options > Restore.Subfolders in your remote e-mailIf you create subfolders in your IMAP4 mailboxes on aremote server, you can view and manage these folderswith your device when you subscribe to them. You canonly subscribe to folders in your IMAP4 mailboxes.To view folders in your IMAP4 mailbox, establish aconnection, and select Options > E-mail settings >Retrieval settings > Folder subscriptions.To view a remote folder, select a folder and Options >Subscribe. Every time you go online, the subscribedfolders are updated. This may take some time if thefolders are large.To update the list of folders, select a folder andOptions > Update folder list.Write and send textmessagesSelect Menu > Communic. > Messaging.Your device supports text messages beyond the limitfor a single message. Longer messages are sent as twoor more messages. Your service provider may chargeaccordingly. Characters with accents or other marks,and characters from some language options, take upmore space, and limit the number of characters thatcan be sent in a single message.1. To write a text message, select New message >Text message.2. In the To field, enter a recipient's number, or pressthe scroll key to add a recipient from Contacts. If youenter more than one number, separate thenumbers with a semicolon.3. Enter the text of the message. To use a template,select Options > Insert > Template.4. Select Options > Send.Multimedia messagesSelect Menu > Communic. > Messaging.Only devices that have compatible features can receiveand display multimedia messages. The appearance ofa message may vary depending on the receiving device.A multimedia message (MMS) can contain text andobjects such as images, sound clips, or video clips.Before you can send or receive multimedia messages37CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
on your device, you must define the multimediamessage settings. Your device may have recognisedthe SIM card provider and automatically configured themultimedia message settings. If not, use Settingswizard, or contact your service provider for the correctsettings.Create and send multimediamessagesImportant: Exercise caution when openingmessages. Messages may contain malicious softwareor otherwise be harmful to your device or PC.1. To create a new message, select New message >Multimedia message.2. In the To field, enter a recipient's number or e-mailaddress, or press the scroll key to add a recipientfrom Contacts. If you enter more than one numberor e-mail address, separate them with a semicolon.3. In the Subject field, enter a subject for themessage. To change the fields that are visible,select Options > Address fields.4. Enter the text of the message, and select Options >Insert object to add media objects. You can addobjects such as Image, Sound clip, or Video clip.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limitthe device may make it smaller so that it can be sentby MMS.5. Each slide of your message can contain only onevideo or sound clip. To add more slides to yourmessage, select Options > Insert new > Slide.To change the order of slides in your message,select Options > Move.6. To preview a multimedia message before sendingit, select Options > Preview.7. Select Options > Send.To delete an object from a multimedia message, selectOptions > Remove.To set the sending options for the current multimediamessage, select Options > Sending options.Instant messagingSelect Menu > Communic. > IM.Instant messaging (IM) (network service) allows you toconverse with other people using instant messagesand join discussion forums (IM groups) with specifictopics. Various service providers maintain IM serversthat you can log in to after you register to an IM service.Service providers may differ in their support offeatures.If IM is not available from your service provider, it maynot appear in the menu of your device. Contact yourservice provider for more information about signing upfor IM services, costs of services, and IM settings. Youmay receive the settings in a special text message fromthe service provider.38CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Messaging settingsSelect Menu > Communic. > Messaging >Options > Settings.Fill in all fields marked with Must be defined or witha red asterisk.Your device may recognise the SIM card provider andconfigure the correct text message, multimediamessage, and GPRS settings automatically. If not,contact your service provider for the correct settings,order the settings from your service provider in aconfiguration message, or use the Settings wizardapplication.Text message settingsSelect Menu > Communic. > Messaging >Options > Settings > Text message.Select from the following:•Message centres — View the available messagecentres for your device, or create a new one.•Message centre in use — Select a message centreto send the message.•Character encoding — Select Reduced support touse automatic character conversion to anotherencoding system when available.•Receive report — Select Yes if you want thenetwork to send you delivery reports on yourmessages (network service).•Message validity — Select how long the messagecentre resends your message if the first attempt fails(network service). If the recipient cannot be reachedwithin the validity period, the message is deletedfrom the message centre.•Message sent as — Convert the message to anotherformat, such as Text, Fax, Paging, or E-mail.Change this option only if you are sure that yourmessage centre is able to convert text messages intothese other formats. Contact your service provider.•Preferred connection — Select the preferredmethod of connection when sending text messagesfrom your device.•Reply via same centre — Select whether you wantthe reply message to be sent using the same textmessage centre number (network service).Multimedia messagesettingsSelect Menu > Communic. > Messaging >Options > Settings > Multimedia message.Select from the following:•Image size — Select Small or Large to scale imagesin multimedia messages. Select Original tomaintain the original image size.•MMS creation mode — Select Restricted to haveyour device prevent you from including content inmultimedia messages that may not be supported bythe network or the receiving device. To receivewarnings about including such content, selectGuided. To create a multimedia message with norestrictions on attachment type, select Free. If youselect Restricted, creating multimediapresentations is not possible. 39CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Access point in use — Select the default accesspoint to connect to the multimedia message centre.You may not be able to change the default accesspoint if it is preset in your device by your serviceprovider.•Multimedia retrieval — Select Alwaysautomatic to receive multimedia messages alwaysautomatically, Auto in home netw. to receivenotification of a new multimedia message that youcan retrieve from the message centre (for example,when you are travelling abroad and are outside yourhome network), Manual to retrieve multimediamessages from the message centre manually, orOff to prevent receipt of any multimedia messages.•Allow anon. msgs. — Select whether you want toreceive messages from unknown senders.•Receive adverts — Select whether you want toreceive messages defined as advertisements.•Receive report — Select Yes to have the status ofthe sent message to be shown in the log (networkservice). Receiving a delivery report of a multimediamessage that has been sent to an e-mail addressmay not be possible.•Deny report sending — Select Yes to not senddelivery reports from your device for receivedmultimedia messages.•Message validity — Select how long the messagingcentre tries to send the message (network service).If the recipient of a message cannot be reachedwithin the validity period, the message is removedfrom the multimedia messaging centre. Maximumtime is the maximum amount of time allowed bythe network.E-mail account settingsSelect Menu > Communic. > Messaging >Options > Settings > E-mail.If you try to edit mailbox settings but have not set upan e-mail account, the mailbox guide opens and helpsyou set up your e-mail account.If you have defined a mailbox, scroll to it, and press thescroll key to edit the settings.The settings available for editing may vary. Somesettings may be preset by your service provider.Connection settingsTo define the connection settings, select an e-mailaccount and Options > Edit > Connectionsettings. To edit the settings for the e-mail you receive,select Incoming e-mail. To edit the settings for the e-mail you send, select Outgoing e-mail.User settingsTo define the user settings for an e-mail account, selectthe account, select Options > Edit > User settings,and define the following settings:•My name — Enter a name to appear before your e-mail address when you send e-mail.•Reply-to — Select whether you want replies to beredirected to a different address. Select On, andenter the e-mail address to which you want to directthe replies. You can only enter one address to whichreplies are directed.•Delete e-mails from — Select whether you wantto delete the e-mail messages only from the deviceor from both the device and the server. Select40CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Always ask if you want to confirm from where thee-mail should be deleted every time you delete ane-mail.•Send message — Select to send the e-mailimmediately or when a connection is available.•Send copy to self — Select whether you want tosave a copy of the e-mail to your remote mailboxand to the address defined in My e-mail address inthe Outgoing e-mail settings.•Include signature — Select whether you want toattach a signature to your e-mail messages.•New e-mail alerts — Select whether you want tobe notified of a new received e-mail message witha tone and a note.Retrieval settingsTo define the retrieval settings, select the e-mailaccount, select Options > Edit > Retrievalsettings, and define the following settings:•E-mail to retrieve — Select whether you want toretrieve only the e-mail header information such assender, subject and date, e-mail, or e-mail withattachments. This setting is for POP3 mailboxesonly.•Retrieval amount — Select the number of e-mailmessages you want to retrieve from the remoteserver to your mailbox.•IMAP4 folder path — Define the folder path forfolders to be subscribed. This setting is for IMAP4mailboxes only.•Folder subscriptions — Subscribe to other foldersin the remote mailbox and retrieve content fromthose folders. This setting is for IMAP4 mailboxesonly.Automatic retrieval settingsTo define the automatic retrieval settings for an e-mailaccount, select the account, select Options > Edit >Automatic retrieval, and define the followingsettings:•E-mail retrieval — Select Enabled to retrieve newe-mail messages automatically from your remotemailbox, or Only in home netw. to retrieve new e-mail messages automatically from your remotemailbox only when you are in your home networkand not, for example, travelling.•Retrieval days — Select the days on which e-mailis retrieved to your device.•Retrieval hours — Define the hours betweenwhich the e-mail is retrieved.•Retrieval interval — Select the interval betweenretrieving new e-mail messages.•E-mail notifications — Select whether you wantto receive notifications on received e-mail.Other settingsSelect Menu > Communic. > Messaging >Options > Settings > Other.Select from the following:•Save sent messages — Select whether to storesent messages in the Sent folder.•Number of saved msgs. — Enter the number ofsent messages to save. When the limit is reached,the oldest message is deleted.•Memory in use — Select where to save yourmessages. You can save messages to the memorycard only if a memory card is inserted.41CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Folder view — Define how you want the messagesin Inbox to be shown.42CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
InternetWith your new Eseries device you can browse both theinternet and your company's intranet, and downloadand install new applications to your device. You canalso use your device as a modem and connect your PCto the internet.WebSelect Menu > Web.To browse the web (network service), you need toconfigure the internet access point settings. If you areusing a data call or GPRS connection, your wirelessnetwork must support data calls or GPRS, and the dataservice must be activated for your SIM card.Tip: You may receive the internet access pointsettings from your service provider as a specialtext message or from the service provider's webpages. You can also enter the internet accesspoint settings manually. See "Internet accesspoints", p. 45.Check the availability of services, pricing, and fees withyour service provider. Service providers also give youinstructions on how to use their services.The XHTML browser in this device supports the Unicodeencoding format.If the web page is unreadable or not supported andgarbage code is found while browsing, you can try toselect Menu > Web > Options > Settings >Page > Default encoding , and select acorresponding encoding.Connection securityIf the security indicator ( ) is displayed during aconnection, the data transmission between the deviceand the internet gateway or server is encrypted. Thesecurity icon does not indicate that the datatransmission between the gateway and the contentserver (or place where the requested resource isstored) is secure. The service provider secures the datatransmission between the gateway and the contentserver.Security certificates may be required for some services,such as banking services. You are notified if the identityof the server is not authentic or if you do not have thecorrect security certificate in your device. For moreinformation, contact your service provider.Browse the webTo browse the web, select a bookmark or enter the webaddress manually, and select Go to. Use only services43CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
that you trust and that offer adequate security andprotection against harmful software.Tip: When you start to enter the address, theaddresses of the pages you have previouslyvisited that match your input are displayed. Toopen a page, scroll to its address, and press thescroll key.To move on a web page, use the scroll key, which isshown as a pointer on the page. When you move thepointer over a link, the pointer changes into a hand.Press the scroll key to open the link. On a web page,new links usually appear underlined in blue andpreviously visited links in purple. Images that act aslinks have a blue border around them.The addresses of the pages you visit are saved in theAuto. bookmarks folder.BookmarksTo access the bookmarks view while browsing, selectOptions > Bookmarks. To view a bookmarked webpage, select the bookmark.To browse to another web page, select Options > Goto web address, enter the web address, and select Goto.To add a bookmark while browsing, select Options >Save as bookmark.To organise your bookmarks, in the bookmarks view,select Options > Bookmark manager. You can moveand edit bookmarks, and create new folders.Clear the cacheA cache is a memory location that is used to store datatemporarily. If you have tried to access or haveaccessed confidential information requiringpasswords, empty the cache after each use. Theinformation or services you have accessed are storedin the cache.To empty the cache, select Options > Clear privacydata > Clear cache.End a connectionTo end the connection and view the browser pageoffline, select Options > Tools > Disconnect. To endthe connection and close the browser, selectOptions > Exit.Web settingsSelect Menu > Web > Options > Settings.The web settings are divided into four groups:•General contains access point, home page, andbrowsing security settings.•Page contains imaging, audio, and pop-up settings.•Privacy contains settings related to your privacy.•Web feeds contains settings related to web feedsand blogs.44CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Browse the intranetSelect Menu > Office > Intranet.To browse your company's intranet, you must create acompany-specific VPN policy. Select Menu > Tools >Settings > Connection > VPN.To connect to the intranet, open the Intranetapplication, select the connection method andOptions > Connect.To define which VPN profile to use in the connection,select Options > Use other VPN policy.To define the settings for the intranet connection,select Options > Settings.Download!Select Menu > Download!.With Download! (network service), you can browse,download, and install items, such as latest applicationsand related documents, to your device from the web.The items are categorised under catalogs and foldersprovided by Nokia or independent service providers.Some items may be chargeable, but you can usuallypreview them free of charge.Download! uses your network services to access themost updated content. For information on additionalitems available through Download!, contact yourservice provider, or the supplier or manufacturer of theitem.Only install and use applications and other softwarefrom sources that offer adequate security andprotection against harmful software.Manage itemsTo open an item or view the content of a folder orcatalogue, scroll to it, and press the scroll key.To buy the selected item, select Options > Buy.To download an item that is free of charge, selectOptions > Get.To search for an item, select Options > Search.To adjust the settings, select Options > Settings.To view the list of downloaded items, select Options >My items.Internet access pointsAn internet access point is a collection of settings,which define how the device creates a data connectionto the network. To use e-mail and multimedia servicesor to browse web pages, you must first define accesspoints for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.45CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Set up an internet accesspoint for packet data (GPRS)1. Select Menu > Tools > Settings >Connection > Access points.2. Select Options > New access point to create anew access point, or select an existing access pointfrom the list and then Options > Duplicate accesspoint to use the access point as a basis for the newone.3. Define the following settings.•Connection name — Enter a descriptive namefor the connection.•Data bearer — Select Packet data.•Access point name — Enter the name for theaccess point. The name is usually provided byyour service provider.•User name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.•Prompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.•Password — Enter your password if required bythe service provider. The password is often case-sensitive and provided by the service provider.•Authentication — Select Secure to send yourpassword always encrypted, or Normal to sendyour password encrypted when possible.•Homepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.4. After defining the settings, select Options >Advanced settings to define the advancedsettings or Back to save the settings and exit.Connect PC to webYou can use your device to connect your PC to the web.1. Connect the data cable to the USB connectors ofyour device and your PC.2. Select Connect PC to web. The necessary Windowssoftware is automatically installed from your deviceto the PC.3. Accept the installation in your PC. If asked, acceptalso the connection. When the connection to theweb is established, the web browser of your PCopens.You must have administrator rights to your PC, and theautorun option enabled in the PC. If not, run thesetup.exe file from the CD-ROM drive of your PC.46CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
TravellingNeed directions? Looking for a restaurant? Your Eseriesdevice has the tools to get you where you want to be.About GPS andsatellite signalsThe Global Positioning System (GPS) is a worldwideradio navigation system that includes 24 satellites andtheir ground stations that monitor the operation of thesatellites. Your device has an internal GPS receiver.A GPS terminal receives low-power radio signals fromthe satellites and measures the travel time of thesignals. From the travel time, the GPS receiver cancalculate its location to the accuracy of metres.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.The Global Positioning System (GPS) is operated by thegovernment of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected byadjustments to GPS satellites made by the United Statesgovernment and is subject to change with the UnitedStates Department of Defense civil GPS policy and theFederal Radionavigation Plan. Accuracy can also beaffected by poor satellite geometry. Availability andquality of GPS signals may be affected by your location,buildings, natural obstacles, and weather conditions.The GPS receiver should only be used outdoors to allowreception of GPS signals.Any GPS should not be used for precise locationmeasurement, and you should never rely solely onlocation data from the GPS receiver and cellular radionetworks for positioning or navigation.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.To enable or disable different positioning methods,such as Bluetooth GPS, select Menu > Tools >Settings > General > Positioning > Positioningmethods.About satellite signalsIf your device cannot find the satellite signal, considerthe following:•If you are indoors, go outdoors to receive a bettersignal.•If you are outdoors, move to a more open space.•Ensure that your hand does not cover the GPSantenna of your device. 47CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•If the weather conditions are bad, the signalstrength may be affected.•Establishing a GPS connection may take from acouple of seconds to tens of minutes.Satellite statusTo check how many satellites your device has found,and whether your device is receiving satellite signals,select Menu > GPS > GPS data > Position >Options > Satellite status. If your device has foundsatellites, a bar for each satellite is shown in thesatellite info view. The longer the bar, the stronger thesatellite signal. When your device has received enoughdata from the satellite signal to calculate thecoordinates of your location, the bar turns black.Initially your device must receive signals from at leastfour satellites to be able to calculate the coordinates ofyour location. When the initial calculation has beenmade, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better when moresatellites are found.Positioning settingsSelect Menu > Tools > Settings > General >Positioning.To use a specific positioning method to detect thelocation of your device, select Positioning methods.To select a positioning server, select Positioningserver.MapsSelect Menu > GPS > Maps.With Maps, you can see your current location on themap, browse maps for different cities and countries,search for addresses and different points of interest,plan routes from one location to another, and savelocations and send them to compatible devices. Youcan also purchase licences for extra services, such astravel guides, traffic information, and navigationservice with voice guidance. These services are notavailable for all countries or regions.If you browse to an area which is not covered by mapsalready downloaded in your device, a map for the areais automatically downloaded through the internet.Some maps may be available in your device or memorycard. You can also use the Nokia Map Loader PCsoftware to download maps. To install Nokia MapLoader to a compatible PC, go towww.maps.nokia.com.Downloading maps may involve the transmission oflarge amounts of data through your service provider'snetwork. Contact your service provider for informationabout data transmission charges.When you use Maps for the first time, you may need toselect an access point for downloading maps. Tochange the access point later, select Options >Tools > Settings > Internet > Default accesspoint.48CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
About MapsTo connect to the internet automatically when youstart Maps, select Options > Tools > Settings >Internet > Go online at start-up > Yes.To prevent automatic downloading of maps, selectOptions > Tools > Settings > Internet > Goonline at start-up > Never.To set the device to ask your permission beforeconnecting to the internet, select Options > Tools >Settings > Internet > Go online at start-up >Always ask.To be informed when your device registers to anetwork other than your home network, selectOptions > Tools > Settings > Internet >Roaming warning > On (shown only when you areonline). For details and roaming costs, contact yourservice provider.Tip: To avoid data transfer costs, you can alsouse Maps without an internet connection, andbrowse the maps that are saved in your deviceor memory card.Almost all digital cartography is inaccurate andincomplete to some extent. Never rely solely on thecartography that you download for use in this device.Move on a mapThe map coverage varies by country and region.When you open Maps, the capital of the country you arein or the location that was saved from your last sessionis shown. The map of the location is also downloaded,if needed.To zoom in to your GPS position or your last knownlocation, press the function key and 0.When the GPS connection is active, shows yourcurrent location on the map.To move on the map, scroll up, down, left, or right withthe scroll key. The map is oriented towards north bydefault.To zoom in and out on the map, press the function keyand *, or the function key and #.When you browse the map on the display, a new mapis automatically downloaded if you scroll to an areawhich is not covered by maps already downloaded.These maps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider. The maps are automaticallysaved in the device memory or on a compatiblememory card (if inserted).Display indicatorsThe GPS indicator on the bottom rightcorner of the display shows the availability andstrength of the satellite signal. One bar is one satellite.When the device tries to find a satellite, the bar isyellow. When the device receives enough data from thesatellite to establish a GPS connection, the bar turnsgreen. The more green bars, the stronger the GPSconnection. 49CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Initially, your device must receive signals from at leastfour satellites to calculate the coordinates of yourlocation. After the initial calculation, signals from threesatellites may be enough.The data transfer indicator shows theinternet connection used and the amount of datatransferred since the application started.Find locationsTo find a location in the city or area displayed on themap, enter the full or partial address of the location inthe search field, and press the scroll key. To find alocation in another city, enter the city and the full orpartial address, such as London Oxford Street, andpress the scroll key.To find a specific address, or an address in anothercountry, select Options > Search > Addresses.Country/Region * and City or post code aremandatory.Tip: To search for locations in another countryusing the search field, enter also the name of thecountry in the search field: Rome Italy.To import a location address from the Contactsapplication, select Options > Search > Addresses >Options > Select from Contacts.The search results are grouped by categories. To limitthe search to one category, select Options > Search.If you search for locations without an internetconnection, the search results are limited to a radius of50 km (31 miles).Plan a routeTo plan a route, select your start point on the map orsearch for a location, press the scroll key, and selectAdd to route.To define the destination and add more locations foryour route, select Options > Add route point, andsearch for the location.To switch between walking or driving mode, selectOptions > Settings > Transport modeTo show the route on the map, select Options > Showroute.To navigate to the destination by car or on foot, if youhave purchased a licence for these extra services, selectOptions > Start driving or Start walking .To save the route, select Options > Save route.GPS dataSelect Menu > GPS > GPS data.With GPS data, you can view your current location, findyour way to a desired location, and track distance.Select Navigation to view navigating information toyour trip destination, Position to view positioninginformation about your current location, or Trip dist.to view your travelling information such as thedistance and duration you have travelled, and youraverage and maximum speeds.The application must receive positioning informationfrom at least four satellites to be used as a travellingaid.50CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.Use GPS dataTo check the signal strength of the satellites thatprovide the positioning information necessary fornavigation, open any of the three views and selectOptions > Satellite status.To set a landmark or location as the destination of yourtrip, select Navigation > Options > Setdestination. You can also enter the destinationlatitude and longitude coordinates.To remove the destination set for your trip, selectNavigation > Options > Stop navigation.To save your current position as a landmark, selectNavigation or Position, and Options > Saveposition.To activate the trip meter, select Trip distance >Options > Start. To stop the trip meter, selectOptions > Stop.To reset all fields and start calculating the trip again,select Trip distance > Options > Restart.To change the measuring system in use, selectOptions > Settings > Measurement system >Metric or Imperial.To enter the altitude calibration to correct the altitudereceived from the positioning satellites, selectOptions > Settings > Altitude calibration.LandmarksSelect Menu > GPS > Landmarks.Landmarks are coordinates to geographic locationsthat you can save to your device for later use indifferent location-based services. You can createlandmarks using the internal GPS receiver of yourdevice or network (network service).Create a landmarkTo create a landmark, select Options > Newlandmark. Select Current position to make a networkrequest for the latitude and longitude coordinates ofyour current location, Select from map to select thelocation from a map, or Enter manually to fill innecessary location information such as a name,category, address, latitude, longitude, and altitude.To show the landmark on the map, select Options >Show on map.51CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Nokia Office ToolsNokia Office Tools support mobile business and enableeffective communication with work teams.Active notes Select Menu > Office > Active notes.Active notes allows you to create, edit, and viewdifferent kinds of notes, for example, meeting memos,hobby notes, or shopping lists. You can insert images,videos, and sound in the notes. You can link notes toother applications, such as Contacts, and send notes toothers.To create a note, start writing.To edit a note, scroll to it, and press the scroll key.To insert images, sound clips, video, business cards,web bookmarks, and files, select Options > Insertobject.To add new items to the note, select Options > Insertnew. You can record sound and video clips, and captureimages.To add boldface, italics, or underlining to your text orchange the font colour, press and hold the shift key anduse the scroll key to select the text. Then selectOptions > Text.To send the note, select Options > Send.To link a note to a contact, select Options > Link noteto call > Add contacts. You can see the note on thedisplay of your device when making a call to orreceiving a call from the contact.CalculatorSelect Menu > Office > Calculator.This calculator has limited accuracy and is designed forsimple calculations.To make a calculation, enter the first number of thecalculation. Select a function such as add or subtractfrom the function map. Enter the second number of thecalculation, and select =. The calculator performsoperations in the order they are entered. The result ofthe calculation remains in the editor field and can beused as the first number of a new calculation.The device saves the result of the last calculation in itsmemory. Exiting the Calculator application orswitching off the device does not clear the memory. Torecall the last saved result the next time you open theCalculator application, select Options > Last result.To save the numbers or results of a calculation, selectOptions > Memory > Save.52CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To retrieve the results of a calculation from the memoryand use them in a calculation, select Options >Memory > Recall.File managerSelect Menu > Office > File mgr..With File manager, you can manage the contents andproperties of files and folders on your device memoryand memory card. You can open, create, move, copy,rename, send, and search for files and folders.Copyright protection may prevent sending some files.Open the device tab or the memory card tab.To select multiple files, scroll to each file, and selectOptions > Mark/Unmark > Mark.To send the selected files, select Options > Send.To move or copy files or folders to another folder, selectOptions > Move to folder or Copy to folder. Defaultfolders such as Sound clips in Gallery cannot be moved.To search for files, select Options > Find. Enter thesearch text, and press the scroll key. The folders andfiles whose names contain the search text aredisplayed.To view information about the selected file, selectOptions > View details. To view additionalinformation about the file online, select Options >Additional details.QuickofficeSelect Menu > Office > Quickoffice.Quickoffice consists of Quickword for Microsoft Word,Quicksheet for Microsoft Excel, Quickpoint for MicrosoftPowerPoint, and Quickmanager for purchasingsoftware. You can view Microsoft Office 2000, XP, and2003 documents (*.doc, *.xls, and *.ppt) withQuickoffice. If you have the editor version ofQuickoffice, you can also edit files.All file formats or features are not supported.Work with filesTo open a file, scroll to it, and press the scroll key.To sort files according to the type, select Options >Sort by.To view the details of a file, select Options >Details. The details include the name, size and locationof the file, and the time and date when the file was lastmodified.To send files to a compatible device, select Options >Send and the sending method.ConverterSelect Menu > Office > Converter.The converter has limited accuracy, and roundingerrors may occur. 53CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Convert measurements1. Scroll to the Type field, and select Options >Conversion type to open a list of measures. Selectthe measure to use, and select OK.2. Scroll to the first Unit field, and select Options >Select unit. Select the unit from which to convert,and select OK. Scroll to the next Unit field, andselect the unit to which to convert.3. Scroll to the first Amount field, and enter the valueto convert. The other Amount field changesautomatically to show the converted value.Set base currency andexchange rateWhen you change base currency, you must enter newexchange rates because all previously set exchangerates are cleared.Before you can make currency conversions, you mustchoose a base currency and add exchange rates. Therate of the base currency is always 1. The base currencydetermines the conversion rates of the othercurrencies.1. To set the rate of exchange for the unit of currency,scroll to the Type field, and select Options >Currency rates.2. Scroll to the currency type and enter the exchangerate you would like to set per single unit ofcurrency.3. To change the base currency, scroll to the currency,and select Options > Set as base currency.4. Select Done > Yes to save the changes.After you have inserted all the necessary exchangerates, you can make currency conversions.Zip managerSelect Menu > Office > Zip.With Zip manager, you can create new archive files tostore compressed ZIP formatted files; add single ormultiple compressed files or directories to an archive;set, clear, or change the archive password for protectedarchives; and change settings, such as compressionlevel, and file name encoding.You can store the archive files on the device memoryor on a memory card.PDF readerSelect Menu > Office > Adobe PDF.With PDF reader you can read PDF documents on thedisplay of your device; search for text in thedocuments; modify settings, such as zoom level andpage views; and send PDF files using e-mail.Printing You can print documents, such as files, messages, orweb pages, from the device, preview a print job, definepage layout options, select a printer, or print to a file.You may not be able to print all types of documents.54CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To configure a printer for your device, select Menu >Office > Printers > Options > Add. To set theprinter as the default printer, select Options >Printing options > Printers, scroll to the printer andselect Options > Set as default.Before you print, make sure your device is properlyconnected to the printer.To print a document, select Options > Printingoptions > Print.To print to a file, select Options > Printingoptions > Print > Print to file, and determine thelocation for the file.To change the printing options, select Options >Printing options. You can select the printer you wantto use, the number of copies and the range of pagesyou want to print.To change the page layout before printing, selectOptions > Printing options > Page setup. You canchange the paper size and orientation, define themargins, and insert a header or a footer. The maximumlength of the header and footer is 128 characters.To preview a file or message before you print, selectOptions > Printing options > Preview.ClockSelect Menu > Office > Clock.In Clock, you can view your local time and time zoneinformation, set and edit alarms, or modify date andtime settings.Alarm clockOpen the alarm clock tab.To set an alarm, select Options > New alarm. Whenan alarm is active, is displayed.To switch off the alarm, select Stop, or to stop thealarm for 5 minutes, select Snooze. If the alarm timeis reached while the device is switched off, the deviceswitches itself on and starts sounding the alarm tone.If you select Stop, the device asks whether you wantto activate the device for calls. Select No to switch offthe device or Yes to make and receive calls. Do notselect Yes when wireless phone use may causeinterference or danger.To change the alarm time, select Options > Resetalarm.To remove the alarm, select Options > Removealarm.Clock settingsSelect Options > Settings.To change the time or date, select Time or Date.To change the clock shown on the home screen, selectClock type > Analogue or Digital.To allow the mobile phone network to update the time,date, and time zone information to your device(network service), select Network operator time >Auto-update.To change the alarm tone, select Clock alarm tone.55CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
NotesSelect Menu > Office > Notes.You can create and send notes to other compatibledevices, and save received plain text files (.txt format)to Notes.To write a note, start entering the text. The note editoropens automatically.To open a note, scroll to it, and press the scroll key.To send a note to other compatible devices, selectOptions > Send.To synchronise or to define synchronisation settingsfor a note, select Options > Synchronisation. SelectStart to initialise synchronisation or Settings to definethe synchronisation settings for the note.Chinese-Englishbilingual dictionaryTo look up a Chinese word for English translation andan English word for Chinese translation, select Menu >Office > Dictionary.The dictionary database is preset in memory card. Ifyou take out the memory card, or use the memory cardwhich is not installed with the dictionary database, youwill not be able to use the dictionary function.Search for words in thedictionarySelect an input method as needed, then enter theChinese characters or English words you wish to lookup.When you enter text in the inputting window, thedevice will automatically filter those entries matchingto your text from the Bilingual dictionary and show acandidate list in the display. The most matched entrywill be highlighted and located at the top of thecandidate list.1. Scroll up or down to highlight your needed entry,when you are moving the highlight bar, the text inthe input window stays unchanged.2. You could use the below methods to select entry:•Press the scroll key.•Select Select word from the option menu.Your selected entry will be automatically shown in theinput window (if this entry is different from your inputChinese characters or English words), and itstranslation will be shown on the screen to replace theprevious candidate entry list. Meanwhile, the cursorwill locate in the translation window.Sometimes, the screen cannot display the wholetranslation content. Press the up or down scroll key toview the whole content.56CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Return to the state oflooking up in dictionaryIf you want to continue to look up the translation ofother Chinese characters or English words in dictionary,please implement any of the following options:•Enter the Chinese characters or English words youwant to look up.•First press the backspace key to empty the contentsin the input window, and then enter the Chinesecharacters or English words you want to look up.•Press Back. The dictionary will return to the state ofshowing candidates entry list, but the entry in theinputting window is still highlighted. You coulddirectly input text or move the cursor by scrollingleft or right to edit the text in the input window.57CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MediaYour device contains a variety of media applications forboth business and leisure time use.For more information, see the extended user guide onthe web.CameraSelect Menu > Media > Camera.Capture an imageYour device supports an image capture resolution ofup to 2048 x 1536 pixels. The image resolution in thisguide may appear different.To capture an image, use the display as a viewfinderand press the scroll key. The device saves the image inGallery.To zoom in or out before capturing an image, scroll upor down. This function is available only when thetoolbar is not shown.To focus on the subject before capturing the image,press the T key.The toolbar provides you with shortcuts to differentitems and settings before and after capturing an imageor recording a video. Scroll to a toolbar item and pressthe scroll key. Switch between the video mode and the imagemode. Select the scene. Select the flash mode (images only). Activate the self-timer (images only). Activate the sequence mode (images only). Select a colour effect. Show or hide the viewfinder grid (images only). Adjust the white balance. Adjust the exposure compensation (images only).The available options vary depending on the capturemode and view you are in. The settings return to thedefault after you close the camera.Record videos1. If the camera is in the image mode, select the videomode from the toolbar.2. To start recording, press the scroll key.58CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
3. To pause recording at any time, select Pause. SelectContinue to resume recording.4. To stop recording, select Stop. The video clip isautomatically saved in Gallery. The maximumlength of the video clip depends on the availablememory.Music playerWarning: Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing. Do not hold the device near your ear when theloudspeaker is in use, because the volume may beextremely loud.Select Menu > Media > Music player.Music player supports files formats such as AAC, AAC+,eAAC+, MP3, and WMA. Music player does notnecessarily support all features of a file format or allthe variations of file formats.You can also use Music player to listen to podcastepisodes. Podcasting is a method for delivering audioor video content over the internet using either RSS orAtom technologies for playback on mobile devices andPCs.You can transfer music from other compatible devicesto your device. See "Transfer music from PC", p. 60.Play a song or a podcastepisodeTo add all available songs and podcasts to the musiclibrary, select Options > Refresh.To play a song or a podcast episode, select Music orPodcasts and the desired category, then scroll to thesong or podcast episode and press the scroll key.To pause playback, press the scroll key; to resume,press the scroll key again. To stop playback, scrolldown.To fast forward or rewind, press and hold the scroll keyto the right or left.To go to the next item, scroll right. To return to thebeginning of the item, scroll left. To skip to the previousitem, scroll left again within 2 seconds after a song orpodcast has started.To modify the tone of the music playback, selectOptions > Equaliser.To modify the balance and stereo image or to enhancebass, select Options > Audio settings.To return to the home screen and leave the playerplaying in the background, press the end key.PlaylistsTo view and manage playlists, select Music >Playlists.To create a new playlist, select Options > Createplaylist.59CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To add songs to the playlist, select the song andOptions > Add to a playlist > Saved playlist or Newplaylist.To reorder songs in a playlist, scroll to the song youwant to move, and select Options > Reorder list.Nokia Music Store Select Menu > Media > Music store.In the Nokia Music Store (network service) you cansearch, browse, and purchase music to download toyour device. To purchase music, you need to registerfor the service.To check the Nokia Music Store availability in yourcountry, visit www.nokia.com/music.To find more music in the different categories, selectOptions > Find in Music store.To select the access point to use with the Music Store,select Default acc. pt..Transfer music from PCTo transfer music from your PC, connect your device tothe PC with a compatible USB data cable or Bluetoothconnectivity. If you are using the USB cable, select Massstorage as the connection mode. Make sure that acompatible memory card is inserted in the device.If you selectMedia transfer as the connection mode,you can use Windows Media Player to synchronisemusic between your device and PC.GallerySelect Menu > Media > Gallery.Use Gallery to access and use different types of media,including images, videos, music, and sounds. Allviewed images and videos, and all received music andsounds are automatically saved to Gallery. Sound clipsare opened in the Music player, and video clips andstreaming links in the RealPlayer application. Imagesare opened in the image viewer.Work with media files andfoldersTo open a file or a folder, scroll to it, and press the scrollkey.To create a new folder, select a file and then selectOptions > Organise > New folder. You cannotcreate folders within folders.To copy or move files, select a file and Options >Organise > Move to folder, New folder, Move tomemory card, Copy to memory card, Copy to phonemem., or Move to phone mem..To download files into Gallery using the browser, selectDownl. graphics, Downld. videos, Downld. tracks,or Downld. sounds. The browser opens, and you canchoose a bookmark or enter the address for thedownload site.To search for a file, select Options > Find. Write theitem you are searching for. Files that match the searchare shown.60CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
View imagesTo open an image for viewing, select Options >Open.To open the next or previous image for viewing, scrollright or left.To enlarge the image on the display, select Options >Zoom in. To reduce the image on the display, selectZoom out.To view the image in full screen size, select Options >Full screen. To return to normal view, select Options >Normal screen.To rotate the image, select Options > Rotate. SelectRight to rotate the image clockwise by 90 degrees, orselect Left to rotate the image counterclockwise by 90degrees.61CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
PersonalisationYou can personalise your device by adjusting thevarious tones, background images, and screen savers,for example.ProfilesSelect Menu > Tools > Profiles.You can adjust and customise the ringing tones, alerttones, and other device tones for different events,environments, or caller groups. The profile currently inuse is shown at the top of the display on the homescreen. However, if the active profile is General, onlytoday's date is shown.To create a new profile, select Options > Createnew, and define the settings.To customise a profile, select a profile and Options >Personalise.To change a profile, select a profile and Options >Activate. The Offline profile prevents your device fromaccidentally switching on, sending or receivingmessages, or using Bluetooth, GPS, or FM radio; it alsocloses any internet connection that may be inoperation when the profile is selected. The Offlineprofile does not prevent you from establishing aBluetooth connection at a later time, or from restartingthe GPS or FM radio, so comply with any applicablesafety requirements when establishing and usingthese features.To delete a profile that you created, select Options >Delete profile. You cannot delete the predefinedprofiles.Select ringing tonesTo set a ringing tone for a profile, select Options >Personalise > Ringing tone. Select a ringing tonefrom the list, or select Download sounds to open abookmark folder containing a list of bookmarks fordownloading tones using the browser. Anydownloaded tones are saved to Gallery.To play the ringing tone for a selected contact grouponly, select Options > Personalise > Alert for, andselect the desired group. Phone calls coming fromoutside that group have a silent alert.To change the message tone, select Options >Personalise > Message alert tone.62CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Personalise the homescreenSelect Menu > Tools > Modes.To change the name of the current home screen, selectMode name.To select which applications and notifications youwant to see on the home screen, select Home screenapplications.To change the theme of the home screen currently inuse, select Theme.To change the background image of the home screencurrently in use, select Wallpaper.To change from one home screen to another, selectSwitch mode.Change the displaythemeSelect Menu > Tools > Themes.To change the theme used in all applications, select theGeneral folder.To change the theme used in the main menu, select theMenu view folder.To change the theme for a particular application, selectthe application-specific folder.To change the background image of the home screen,select the Wallpaper folder.To select an animation for the screen saver, select thePower saver folder.63CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ConnectivityYour device offers several options to connect to theinternet, a corporate intranet, or to another device orcomputer.Connectivity securityAt Nokia, we understand how important it is that yourmobile phone or device operates reliably and that yourpersonal content is saved safely.Any information from an unknown or unreliablesource, via Bluetooth connectivity, multimediamessage, infrared, or cable, may harm your PC, mobilephone, or device. You may protect your mobile phoneor device from damage and keep it secured byfollowing simple measures:•Always keep Bluetooth connectivity closed unlessyou want your phone or device to be visible toothers.•Always be alert when receiving information from anunknown or untrustworthy source.•Do not download or install any applications thatmay include software harmful to your phone ordevice.•Always download and install applications or contentfrom trusted or well-known sources, such as NokiaSoftware Market, where good protection is providedagainst viruses and other harmful software.Data cableTo avoid damaging the memory card, do not removethe data cable in the middle of a data transfer.Transfer data between your device and a PC1. Insert a memory card to your device and connectthe device to a compatible PC with the USB datacable.2. When the device asks which mode is used, selectMass storage. In this mode, you can see yourdevice as a removable hard drive in your computer.3. End the connection from the computer (forexample, from an Unplug or Eject Hardware wizardin Windows) to avoid damaging the memory card.To use Nokia PC Suite with your device, install Nokia PCSuite on your PC, connect the data cable, and select PCSuite.To use your device to connect your PC to the web,connect the data cable, and select Connect PC toweb.64CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To synchronise the music in your device with NokiaMusic Player, install the Nokia Music Player software onyour PC, connect the data cable, and select Mediatransfer.To change the USB mode you normally use with thedata cable, select Menu > Connectivity > USB >USB connection mode and the desired option.To set the device to ask for the mode each time youconnect the USB data cable to the device, selectMenu > Connectivity > USB > Ask onconnection > Yes.BluetoothSelect Menu > Connectivity > Bluetooth.About BluetoothBluetooth technology enables wireless connectionsbetween electronic devices within a range of 10 metres(33 feet). A Bluetooth connection can be used to sendimages, videos, text, business cards, calendar notes, orto connect wirelessly to devices that use Bluetoothtechnology.Since devices using Bluetooth technologycommunicate using radio waves, your device and theother devices do not need to be in direct line-of-sight.The two devices only need to be within a maximum of10 metres of each other, although the connection canbe subject to interference from obstructions such aswalls or other electronic devices.Several Bluetooth connections can be active at a time.For example, if your device is connected to a headset,you can also transfer files to another compatible deviceat the same time.Features using Bluetooth technology increase thedemand on battery power and reduce the battery life.Send and receive data withBluetooth1. When you activate Bluetooth for the first time, youare asked to give a name to your device. Give yourdevice a unique name to make it easy to recogniseif there are several Bluetooth devices nearby.2. Select Bluetooth > On.3. Select My phone's visibility > Shown to all orDefine period. If you select Define period, youneed to define the time during which your deviceis visible to others. Your device and the name youentered can now be seen by other users withdevices using Bluetooth technology.4. Open the application where the item you want tosend is stored.5. Select the item and Options > Send > ViaBluetooth. The device searches for other devicesusing Bluetooth technology within range and liststhem.Tip: If you have sent data using Bluetoothbefore, a list of the previous search results isdisplayed. To search for more Bluetoothdevices, select More devices.65CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
6. Select the device with which you want to connect.If the other device requires pairing before data canbe transmitted, you are asked to enter a passcode.When the connection has been established, Sendingdata is shown.The Sent folder in the Messaging application does notstore messages sent using Bluetooth connectivity.To receive data using Bluetooth, select Bluetooth >On and My phone's visibility > Shown to all toreceive data from a non-paired device or Hidden toreceive data from a paired device only. When youreceive data through Bluetooth, depending on thesettings of an active profile, a tone sounds, and you areasked if you want to accept the message in which thedata is included. If you accept, the message is placedin the Inbox folder in the Messaging application.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).A Bluetooth connection is disconnected automaticallyafter sending or receiving data. Only Nokia PC Suite andsome enhancements such as headsets may maintain aconnection even if not actively used.Pair devicesOpen the paired devices tab.Before pairing, decide on your own passcode (1-16digits), and agree with the user of the other device touse the same code. Devices that do not have a userinterface have a fixed passcode. You need the passcodeonly when you connect the devices for the first time.After pairing, it is possible to authorise the connection.Pairing and authorising the connection makesconnecting quicker and easier, as you do not have toaccept the connection between paired devices everytime you establish a connection.The passcode for remote SIM access must have 16digits.1. Select Options > New paired device. The devicestarts to search for Bluetooth devices within range.If you have sent data using Bluetooth before, a listof the previous search results is displayed. To searchfor more Bluetooth devices, select More devices.2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.3. Select Yes to make the connection between yourdevice and the other device automatic, or No toconfirm the connection manually every time aconnection attempt is made. After pairing, thedevice is saved to the paired devices page.To give a nickname to the paired device, selectOptions > Assign short name. The nickname is onlydisplayed in your device.To delete a pairing, select the device whose pairing youwant to delete and Options > Delete. To delete allpairings, select Options > Delete all. If you arecurrently connected to a device and cancel the pairingwith that device, pairing is removed immediately, andthe connection is ended.To allow a paired device to connect automatically toyour device, select Set as authorised. Connections66CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
between your device and the other device can be madewithout your knowledge. No separate acceptance orauthorisation is needed. Use this status for your owndevices, such as your compatible headset or computer,or devices that belong to someone you trust. If youwant to accept connection requests from the otherdevice separately every time, select Set asunauthorised.To use a Bluetooth audio enhancement such as aBluetooth handsfree or headset, you need to pair yourdevice with the enhancement. See the enhancementuser guide for the passcode and further instructions.To connect to the audio enhancement, switch on theenhancement. Some audio enhancements connectautomatically to your device. Otherwise open thepaired devices tab, scroll to the enhancement, andselect Options > Connect to audio device.Security tipsWhen you are not using Bluetooth connectivity, selectBluetooth > Off or My phone's visibility >Hidden.Do not pair with an unknown device.ModemSelect Menu > Connectivity > Modem.Together with a compatible computer, you can useyour device as a modem to connect to the web, forexample.Before you can use your device as a modem•You need an appropriate data communicationssoftware on your computer, such as Nokia PC Suite.For more information, see the Nokia PC Suite guide.•You must subscribe to the appropriate networkservices from your service provider or internetservice provider.•You must have the appropriate drivers installed onyour computer. You must install drivers for the cableconnection, and you may need to install or updateBluetooth or infrared drivers.To connect the device to a compatible computer usinginfrared, press the scroll key. Make sure the infraredports of the device and computer are directly facingeach other with no obstacles between them.To connect your device to a computer using Bluetoothwireless technology, initiate the connection from thecomputer. To activate Bluetooth in your device, selectMenu > Connectivity > Bluetooth and selectBluetooth > On.If you use a cable to connect your device to a computer,initiate the connection from the computer.You may not be able to use some of the othercommunication features when the device is used as amodem.Connection managerSelect Menu > Connectivity > Conn. mgr..67CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
View and end activeconnectionsTo view detailed information about networkconnections, select a connection from the list andOptions > Details. The type of information showndepends on the connection type.To end the selected network connection, selectOptions > Disconnect.To end all active network connections simultaneously,select Options > Disconnect all.68CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Security and data managementManage the data and software on your device, and takecare of the security of the device and its contents.Important: Your device can only support oneantivirus application. Having more than oneapplication with antivirus functionality could affectperformance and operation or cause the device to stopfunctioning.Lock the deviceImportant: If the device has been locked, enter thelock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requiresthat the device recognise the number to be an officialemergency number. It is advisable to change theprofile or unlock the device by entering the lock codebefore you make the emergency call.To prevent access to the contents of your device, lockthe device when in home screen. Press the power key,select Lock phone, and enter your lock code. Thedefault lock code is 12345. To unlock, press the leftselection key, enter your lock code, and press the scrollkey.To change the lock code, select Menu > Tools >Settings > General > Security > Phone and SIMcard > Lock code. Enter the old code and then thenew code twice. The new code can be 4-255 characterslong. Both alphabets and digits can be used, and bothuppercase and lowercase alphabets are possible.You can also lock the device remotely by sending a textmessage to the device. To enable remote locking andto define the text for the message, select Menu >Tools > Settings > General > Security > Phoneand SIM card > Allow remote lock > Yes. Enter theremote lock message and confirm the message. Themessage must be at least 5 characters long.Memory card securitySelect Menu > Tools > Memory.You can protect a memory card with a password toprevent unauthorised access. To set a password, selectOptions > Set password. The password can be up to8 characters long and is case-sensitive. The passwordis stored in your device. You do not need to enter itagain while you use the memory card on the samedevice. If you use the memory card on another device,you are asked for the password. Not all memory cardssupport password protection. 69CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To remove the memory card password, selectOptions > Remove password. When you remove thepassword, the data on the memory card is notprotected against unauthorised use.To open a locked memory card, select Options >Unlock memory card. Enter the password.If you cannot recall the password to unlock a lockedmemory card, you may reformat the card, in which casethe card is unlocked and password removed.Formatting a memory card destroys all data stored onthe card.EncryptionSelect Menu > Tools > Encryption.Encrypt your device or memory card to preventoutsiders from accessing your important information.Encrypt device memory ormemory cardTo encrypt the device memory, select Phonememory.To encrypt the memory card, select Memory card andfrom the following:•Encrypt without saving key — Encrypt thememory card without saving the encryption key. Ifyou select this option, you cannot use the memorycard in other devices, and if you restore factorysettings, you cannot decrypt the memory card.•Encrypt and save key — Encrypt the memory cardand save the key manually in the default folder. Forsecurity, store the key to a safe place outside thedevice. For example, you can send the key to yourcomputer. Enter a pass phrase for the key and aname for the key file. The pass phrase should be longand complex.•Encrypt with restored key — Encrypt the memorycard with a key you have received. Select the key file,and enter the pass phrase.Decrypt device memory ormemory cardAlways remember to decrypt the device memory and/or the memory card before updating the devicesoftware.To decrypt the device memory, select Phonememory.To decrypt the memory card without destroying theencryption key, select Memory card > Decrypt.To decrypt the memory card and destroy theencryption key, select Memory card > Decrypt andturn off encryption.Fixed diallingSelect Menu > Communic. > Contacts > Options >SIM contacts > Fixed dial contacts.With the fixed dialling service, you can restrict callsfrom your device to certain phone numbers. Not all SIM70CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
cards support the fixed dialling service. Contact yourservice provider for more information.When fixed dialling is activated, calls may be possibleto the official emergency number programmed intoyour device.1. To restrict calls from your device, select Options >New SIM contact and enter the contact name andphone number to the list of numbers to which callsare allowed, or select Add from Contacts to copythe contact from Contacts. To restrict calls by acountry prefix, enter the country prefix in the list ofnumbers. All phone numbers to which calls areallowed must start with this country prefix.2. Select Options > Activate fixed dialling. Youneed your PIN2 code to activate and deactivatefixed dialling or edit your fixed dialling contacts.Contact your service provider if you do not have thecode. To cancel the service, select Options >Deactivate fixed dialling.Tip: To send text messages to the SIM contactswhile the fixed dialling service is active, youneed to add the text message centre number tothe fixed dialling list.Certificate managerSelect Menu > Tools > Settings > General >Security > Certificate management.Digital certificates are used to verify the origins ofsoftware but do not guarantee safety. There are fourdifferent types of certificates: authority certificates,personal certificates, trusted site certificates, anddevice certificates. During a secure connection, a servermay send a server certificate to your device. Uponreceipt, it is checked through an authority certificatestored in your device. You receive notification if theidentity of the server is not authentic or if you do nothave the correct certificate in your device.You can download a certificate from a web site, orreceive a certificate as a message. Certificates shouldbe used when you connect to an online bank or aremote server to transfer confidential information.They should also be used if you want to reduce the riskof viruses or other malicious software, and to check theauthenticity of software when you download andinstall software to your device.Tip: When you add a new certificate, check itsauthenticity.View certificate detailsYou can only be sure of the correct identity of a serverwhen the signature and the validity period of a servercertificate have been checked.To view certificate details, open a certificate folder, andselect a certificate and Options > Certificatedetails.One of the following notes may appear:•Certificate not trusted — You have not set anyapplication to use the certificate. You may want tochange the trust settings.•Expired certificate — The period of validity hasended for the selected certificate.•Certificate not valid yet — The period of validityhas not yet begun for the selected certificate.71CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Certificate corrupted — The certificate cannot beused. Contact the certificate issuer.Certificate trust settingsTrusting a certificate means that you authorise it toverify web pages, e-mail servers, software packages,and other data. Only trusted certificates can be used toverify services and software.Important: Even if the use of certificates makesthe risks involved in remote connections and softwareinstallation considerably smaller, they must be usedcorrectly in order to benefit from increased security.The existence of a certificate does not offer anyprotection by itself; the certificate manager mustcontain correct, authentic, or trusted certificates forincreased security to be available. Certificates have arestricted lifetime. If "Expired certificate" or "Certificatenot valid yet" is shown, even if the certificate shouldbe valid, check that the current date and time in yourdevice are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs to thelisted owner.To change the trust settings, select a certificate andOptions > Trust settings. Select an application fieldand press the scroll key to select Yes or No. You cannotchange the trust settings of a personal certificate.Depending on the certificate, a list of applications thatcan use the certificate is displayed:•Symbian installation — New Symbian operatingsystem application.•Internet — E-mail and graphics.•App. installation — New Java™ application.•Online certif. check — Online certificate statusprotocol.Back up dataIt is recommended to back up device memory regularlyto the memory card or a compatible computer.To back up information from the device memory to amemory card, select Menu > Tools > Memory >Options > Back up phone memory.To restore information from the memory card to thedevice memory, select Menu > Tools > Memory >Options > Restore from card.You can also connect your device to a compatiblecomputer and use Nokia PC Suite to back up data.Application managerSelect Menu > Installations > App. mgr..You can install two types of applications and softwareon your device:•Applications and software specifically intended foryour device or compatible with the Symbianoperating system. These software installation fileshave the extension .sis or .sisx.72CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Java ME™ applications compatible with the Symbianoperating system. The Java application installationfile extensions are .jad or .jar.Installation files may be transferred to your devicefrom a compatible computer, downloaded duringbrowsing, or sent to you in a multimedia message, asan e-mail attachment, or with Bluetooth.During the installation, the device checks the integrityof the package to be installed. The device showsinformation about the checks being carried out, andyou are given options to continue or cancel theinstallation.If you install applications that require a networkconnection, note that the power consumption of yourdevice may increase when you use these applications.Tip: When browsing web pages, you candownload an installation file and install itimmediately. Note, however, that theconnection runs in the background during theinstallation.Install applicationsImportant: Only install and use applications andother software from trusted sources, such asapplications that are Symbian Signed or have passedthe Java Verified™ testing.To download and install software from the web, selectDownload apps.. Select the application andOptions > Install.To view the details of an installed software package,select the application and Options > View details.To view the installation log, select Options > Viewlog. A list shows what software has been installed andremoved, and the date of the installation or removal.If you encounter problems with the device afterinstalling a software package, use this list to find outwhich software package may be the cause of theproblem. The information in this list may also help youpinpoint problems that are caused by softwarepackages that are incompatible with each other.To remove software, select Options > Remove. If youremove software, you can only reinstall it by using theoriginal software package file, or by restoring a fullbackup that contains the removed software package.If you remove a software package, you may no longerbe able to open files created with that software. Ifanother software package depends on the softwarepackage that you removed, the other software packagemay stop working. Refer to the documentation of theinstalled software package for details.Data synchronisationSelect Menu > Tools > Sync.With Sync, you can synchronise your contacts, calendarentries, or notes with corresponding applications on acompatible computer or remote internet server. Yoursynchronisation settings are saved in asynchronisation profile. The Sync application uses 73CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SyncML technology for remote synchronisation. Forinformation on SyncML compatibility, contact thesupplier of the applications with which you want tosynchronise your device.You may receive the synchronisation settings as amessage from your service provider. The availableapplications you can synchronise may vary. Contactyour service provider for more information.Create a synchronisationprofileThere is a Nokia PC Suite synchronisation profileavailable in your device. You do not need to edit it ifyou synchronise your device with a computer usingNokia PC Suite.To create a new profile, select Options > New syncprofile and assign a name for the profile, select theapplications to synchronise with the profile, andspecify the needed connection settings. Contact yourservice provider for details.Mobile VPNSelect Menu > Tools > Settings > Connection >VPN.The Nokia mobile virtual private network (VPN) clientcreates a secure connection to compatible corporateintranet and services, such as e-mail. Your deviceconnects from a mobile network, through the internet,to a corporate VPN gateway that acts as a front door tothe compatible corporate network. VPN client uses IPSecurity (IPSec) technology. IPSec is a framework ofopen standards for supporting secure exchange of dataover IP networks.VPN policies define the method used by the VPN clientand a VPN gateway to authenticate each other, and theencryption algorithms that they use to help protect theconfidentiality of data. Contact your company's ITdepartment for a VPN policy.To install and configure the VPN client, certificates, andpolicies, contact the IT administrator of yourorganisation.Manage VPNSelect VPN management, and from the following:•VPN policies — Install, view, and update VPNpolicies.•VPN policy servers — Edit the connection settingsof VPN policy servers from which you can install andupdate VPN policies. A policy server refers to a NokiaSecurity Service Manager (NSSM), which is notnecessarily required.•VPN log — View the log for your VPN policyinstallations, updates and synchronisations, andother VPN connections.Create VPN access pointsSelect Settings > Connection > VPN.An access point is where your phone connects to thenetwork. To use e-mail and multimedia services or tobrowse web pages you must first define internet accesspoints for these services. VPN access points pair VPN74CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
policies with regular internet access points to createsecure connections.Your service provider may preset some or all accesspoints for your device, and you may not be able tocreate, edit, or remove them.Contact your company's IT department for the correctsettings.Open a destination, select a VPN access point, selectEdit, and define the following:•Connection name — Enter a name for the VPNaccess point.•VPN policy — Select the VPN policy to combine withthe internet access point.•Internet access point — Select the internet accesspoint with which to combine the VPN policy tocreate secure connections for data transfer.•Proxy server address — Enter the proxy serveraddress of the private network.•Proxy port number — Enter the proxy portnumber.Use a VPN connection in anapplicationYou may have to prove your identity when you log onto the enterprise network. Contact your company's ITdepartment for the credentials.To use a VPN connection in an application, theapplication must be associated with a VPN access point.Tip: You can configure the application'sconnection setting to Always ask, in which caseyou select the VPN access point from a list ofconnections when a connection is established.1. In the application in which you want to create a VPNconnection, select a VPN access point as the accesspoint.2. If you are using legacy authentication, enter yourVPN user name and passcode or password. If theSecurID token has become out of synchronisationwith the clock of the ACE/Server, enter the nextpasscode. If you are using certificate-basedauthentication, you may have to enter the key storepassword.75CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SettingsSelect Menu > Tools > Settings.You can define and modify various settings of yourdevice. Modifying these settings affects the operationof your device across several applications.Some settings may be preset for the device or sent toyou in a special message by your service provider. Youmay not be able to change such settings.Select the setting you want to edit to do the following:•Switch between two values, such as on or off.•Select a value from a list.•Open a text editor to enter a value.•Open a slider to decrease or increase the value byscrolling left or right.General settingsSelect Menu > Tools > Settings > General.Personalisation settingsSelect Menu > Tools > Settings > General >Personalisation.Display settingsTo define the level of light that the device needs beforeswitching on the backlight, select Display > Lightsensor.To change the text size, select Display > Font size.To adjust the length of time the display can be left idlebefore the screen saver is activated, select Display >Power saver time-out.To select a welcome note or logo for the display, selectDisplay > Welcome note / logo. You can eitherchoose the default welcome note, enter your own text,or select an image.To set how quickly the display dims after the lastkeypress, select Display > Light time-out.Standby mode settingsTo select whether to use the home screen, select Homescreen > Home screen.To change the home screen mode settings, selectHome screen > Mode settings.To assign shortcuts for the device keys, select Homescreen > Key shortcuts. These shortcuts are notavailable in the home screen.76CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To select whether to show or hide the operator logo,select Home screen > Operator logo > On or Off.To select the mailbox that is shown in the home screen,select Home screen > Home screen mailbox.Tone settingsTo select a ringing tone for voice calls, select Tones >Ringing tone.To set the ringing type, select Tones > Ringingtype. You can also set the device to sound a ringingtone that is a combination of the spoken name of thecaller and the selected ringing tone, when someonefrom your contacts list calls you. Select Tones > Saycaller's name.To set the volume level of the ringing tone, selectTones > Ringing volume.To set the various alert tones, select Tones > Messagealert tone, E-mail alert tone, Calendar alarm tone,or Clock alarm tone.To set the device to vibrate when you receive a call,select Tones > Vibrating alert.To set the volume level of the device keypad tones,select Tones > Keypad tones.To set the warning tones on or off, select Tones >Warning tones.Language settingsTo set the language used on the device display, selectLanguage > Phone language.To select the language in which you write notes andmessages, select Language > Writing language.To select whether to use the predictive text input,select Language > Predictive text.To define the settings for the predictive text input,select Predictive text settings.Notification lightWhen you receive a message or miss a call, the scrollkey starts blinking to indicate the event.To set the length of time you want the scroll key toblink, select Notification light > Blink light for.To select of which events you want to be notified, selectNotification light > Notified events.Settings for One-touch keysSelect Menu > Tools > Settings > General >Personalisation > One-touch keys.To select which application and task is opened whenyou press a One-touch key, select the key andOptions > Open.To restore the preset applications and tasks, selectRestore defaults.Date and time settingsSelect Menu > Tools > Settings > General > Dateand time.To set the current date and time, select Date andTime.To define your time zone, select Time zone.77CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To update the time, date, and time zone informationautomatically (network service), select Networkoperator time > Auto-update.To select whether to use the 12-hour or 24-hour clocksystem and with which symbol to separate hours andminutes, select Time format and Time separator.To determine the date format and separator, selectDate format and Date separator.To define the clock type, select Clock type >Analogue or Digital.To select the tone for the alarm clock, select Clockalarm tone.To determine the week days that are work days for you,select Workdays.Enhancement settingsSelect Menu > Tools > Settings > General >Enhancement.Common enhancement settingsWith most enhancements, you can do the following:To determine which profile is activated when youattach an enhancement to your device, select theenhancement and Default profile.To let the device answer phone calls automatically after5 seconds when an enhancement is attached, selectAutomatic answer > On. If the ringing type is set toBeep once or Silent in the selected profile, theautomatic answer is disabled.To illuminate the device while it is attached to anenhancement, select Lights > On.E-mail key settingsTo select which mailbox to open with the e-mail key,select E-mail key settings > E-mail key, and pressthe scroll key.Security settingsSelect Menu > Tools > Settings > General >Security.Avoid using codes that are similar to emergencynumbers to prevent accidental dialling of theemergency number. Codes are shown as asterisks.When you change a code, enter the current code, thenthe new code twice.Device and SIM card securityTo change the PIN code, select Phone and SIM card >PIN code. The new code must be 4 to 8 digits long. ThePIN code protects your SIM card against unauthoriseduse and is provided with the SIM card. After threeconsecutive incorrect PIN code entries, the code isblocked, and you need to use the PUK code to unblockit before you can use the SIM card again.To set the keypad to lock automatically after a definedperiod, select Phone and SIM card > Keypadautolock period.To set a time-out after which the device isautomatically locked and can be used only if the correct78CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
lock code is entered, select Phone and SIM card >Phone autolock period. Enter a number for the time-out in minutes, or select None to set off the autolockperiod. When the device is locked, you can still answerincoming calls, and calls may still be possible to theofficial emergency number programmed into yourdevice.To set a new lock code, select Phone and SIM card >Lock code. The preset lock code is 12345. Enter thecurrent code and then the new code twice. The newcode can be 4-255 characters long. Both alphabets anddigits can be used, and both uppercase and lowercasealphabets are possible. The device notifies you if thelock code is not properly formatted.Restore original settingsTo restore the original device settings, select Factorysettings. To do this, you need your device lock code.After resetting, the device may take a longer time topower on.Telephone settingsSelect Menu > Tools > Settings > Phone.Call settingsTo display your phone number to the person you arecalling, select Call > Send my caller ID > Yes. To letthe network determine whether your caller ID is sent,select Set by network.To be notified of a new incoming call while you have acall in progress, select Call > Call waiting >Options > Activate. To check if the function is activeon the network, select Options > Check status.To send a text message automatically to the personwho is calling you informing why you cannot answerthe incoming call, select Call > Reject call withSMS > Yes. To set the text for the message, selectCall > Message text.To set off the contact search on the home screen, selectCall > Contact search > Off.Network settingsSelect Menu > Tools > Settings > Phone >Network.To select the operator, select Operator selection andManual to choose from available networks, orAutomatic to have the device select the networkautomatically.To set the device to indicate when it is used in MicroCellular Network (MCN), select Cell info display >On.Connection settingsSelect Menu > Tools > Settings > Connection.79CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Access pointsSelect Menu > Tools > Settings > Connection >Access points.An internet access point is a collection of settings,which define how the device creates a data connectionto the network. To use e-mail and multimedia servicesor to browse web pages, you must first define accesspoints for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.To create a new access point, select Options > Newaccess point or select an existing access point from thelist and then Options > Duplicate access point to usethe access point as a basis for the new one.Packet data (GPRS) settingsSelect Menu > Tools > Settings > Connection >Packet data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using yourdevice in a GSM network, it is possible to have multipledata connections active at the same time; access pointscan share a data connection, and data connectionsremain active, for example, during voice calls. See"Connection manager", p. 67.To define the packet data settings, select Packet dataconnection and select When available to register thedevice to the packet data network when you switch thedevice on in a supported network, or When needed toestablish a packet data connection only when anapplication or action requires it. Select Access pointand enter the access point name provided by yourservice provider to use the device as a packet datamodem to your computer.These settings affect all access points for packet dataconnections.Session initiation protocol(SIP) settingsSelect Menu > Tools > Settings > Connection >SIP settings.Session initiation protocols (SIP) are used for creating,modifying, and terminating certain types ofcommunication sessions with one or more participants(network service). SIP profiles include settings forthese sessions. The SIP profile used by default for acommunication session is underlined.To create a SIP profile, select Options > New SIPprofile > Use default profile or Use existingprofile.To select the SIP profile you want to use by default forcommunication sessions, select Options > Defaultprofile.Edit SIP profilesSelect Options > Edit, and select from the following:•Profile name — Enter a name for the SIP profile.•Service profile — Select IETF or Nokia 3GPP.80CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Default access point — Select the access point touse for the internet connection.•Public user name — Enter your user name receivedfrom your service provider.•Use compression — Select if compression is used.•Registration — Select the registration mode.•Use security — Select if security negotiation isused.•Proxy server — Enter the proxy server settings forthis SIP profile.•Registrar server — Enter the registration serversettings for this SIP profile.Configuration settingsSelect Menu > Tools > Settings > Connection >Configurations.You can receive messages from your service provideror company information management containingconfiguration settings for trusted servers. Thesesettings are automatically saved in Configurations.You may receive configuration settings for accesspoints, multimedia, or e-mail services, and IM orsynchronisation settings from trusted servers.To delete configurations for a trusted server, selectOptions > Delete. The configuration settings forother applications provided by this server are alsodeleted.Application settingsSelect Menu > Tools > Settings > Applications.Select an application from the list to adjust its settings.81CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ShortcutsHere are some of the available keyboard shortcuts inyour device. Shortcuts can make the use of theapplications more efficient.General shortcutsGeneral shortcutsPower key Press and hold to switch your deviceon and off.Press once to switch betweenprofiles.Home screenLeft selectionkey + functionkeyLock and unlock the keypad.Call key Open the call log.0Press and hold to open your homepage in the Web browser.1Press and hold to call your voicemailbox.Number key (2–9)Call a phone number using speeddialling. You must first activatespeed dialling at Menu > Tools >Settings > Phone > Call >Speed dialling > On.Web*Zoom in the page.#Zoom out the page.2Open the search dialog.5View the active pages.8View the page overview.9Open the dialog for entering a newweb address.0Open the bookmarks folder.82CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Nokia original enhancementsWarning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect thepower cord of any enhancement, grasp and pull theplug, not the cord.An extensive range ofenhancements is available foryour device. Please visitwww.nokia.com.cn for moredetails.For availability of theenhancements, please checkwith your local dealer.BatteryBattery model Talk time StandbyBP-4L Up to XXXminutesUp to XXXminutesImportant: These battery talk and standby timescan only be reached in certain optimized networkconditions or surroundings. The actual battery talk andstandby times may differ depending on SIM card,features used, battery age and condition,temperatures to which battery is exposed, differentnetwork conditions, and many other factors, so thatthe talk and standby times may be significantly shorterthan given here. In addition, ringing tones, handsfree,use in digital mode, and other functions consume thepower, and the amount of time a device is used for callswill affect its standby time. Likewise, the amount oftime that the device is turned on and in the standbymode will affect its talk time.83CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Battery and charger informationBattery and chargerinformationYour device is powered by a rechargeable battery. Thebattery intended for use with this device is BP-4L. Thisdevice is intended for use when supplied with powerfrom the following chargers: AC-8C and CA-100. Thebattery can be charged and discharged hundreds oftimes, but it will eventually wear out. When the talkand standby times are noticeably shorter than normal,replace the battery. Use only Nokia approved batteries,and recharge your battery only with Nokia approvedchargers designated for this device. Use of anunapproved battery or charger may present a risk offire, explosion, leakage, or other hazard.The exact charger model number may vary dependingon the type of plug. The plug variant is identified byone of the following: E, EB, X, AR, U, A, C, or UB. Forexample, the model numbers for the charger can be,among others, AC-8C and CA-100C, AC-8C and CA-100U,AC-8C and CA-100X, etc. The charger model offered toChina mainland is AC-8C and CA-100C.If a battery is being used for the first time or if thebattery has not been used for a prolonged period, itmay be necessary to connect the charger, thendisconnect and reconnect it to begin charging thebattery. If the battery is completely discharged, it maytake several minutes before the charging indicatorappears on the display or before any calls can be made.Always switch the device off and disconnect thecharger before removing the battery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overchargingmay shorten its lifetime. If left unused, a fully chargedbattery will lose its charge over time.Always try to keep the battery between 15°C and 25°C(59°F and 77°F). Extreme temperatures reduce thecapacity and lifetime of the battery. A device with a hotor cold battery may not work temporarily. Batteryperformance is particularly limited in temperatureswell below freezing.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as acoin, clip, or pen causes direct connection of thepositive (+) and negative (-) terminals of the battery.(These look like metal strips on the battery.) This mighthappen, for example, when you carry a spare batteryin your pocket or purse. Short-circuiting the terminalsmay damage the battery or the connecting object.Do not dispose of batteries in a fire as they mayexplode. Batteries may also explode if damaged.84CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Dispose of batteries according to local regulations.Please recycle when possible. Do not dispose ashousehold waste.Do not dismantle, cut, open, crush, bend, deform,puncture, or shred cells or batteries. In the event of abattery leak, do not allow the liquid to come in contactwith the skin or eyes. In the event of such a leak, flushyour skin or eyes immediately with water, or seekmedical help.Do not modify, remanufacture, attempt to insertforeign objects into the battery, or immerse or exposeit to water or other liquids.Improper battery use may result in a fire, explosion, orother hazard. If the device or battery is dropped,especially on a hard surface, and you believe thebattery has been damaged, take it to a service centrefor inspection before continuing to use it.Use the battery only for its intended purpose. Never useany charger or battery that is damaged. Keep yourbattery out of the reach of small children.Nokia batteryauthenticationguidelinesAlways use original Nokia batteries for your safety. Tocheck that you are getting an original Nokia battery,purchase it from an authorised Nokia dealer, andinspect the hologram label using the following steps:Successful completion of the steps is not a totalassurance of the authenticity of the battery. If you haveany reason to believe that your battery is not anauthentic, original Nokia battery, you should refrainfrom using it, and take it to the nearest authorisedNokia service point or dealer for assistance. Yourauthorised Nokia service point or dealer will inspectthe battery for authenticity. If authenticity cannot beverified, return the battery to the place of purchase.Authenticate hologram1. When you look at the hologramon the label, you should see theNokia connecting handssymbol from one angle and theNokia Original Enhancementslogo when looking fromanother angle.2. When you angle the hologramleft, right, down and up, youshould see 1, 2, 3 and 4 dots oneach side respectively.What if your battery is notauthentic?If you cannot confirm that your Nokia battery with thehologram on the label is an authentic Nokia battery, 85CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
please do not use the battery. Take it to the nearestauthorised Nokia service point or dealer for assistance.The use of a battery that is not approved by themanufacturer may be dangerous and may result inpoor performance and damage to your device and itsenhancements. It may also invalidate any approval orwarranty applying to the device.To find out more about original Nokia batteries, visitwww.nokia.com/battery.86CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.•Keep the device dry. Precipitation, humidity, and alltypes of liquids or moisture can contain mineralsthat will corrode electronic circuits. If your devicedoes get wet, remove the battery, and allow thedevice to dry completely before replacing it.•Do not use or store the device in dusty, dirty areas.Its moving parts and electronic components can bedamaged.•Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certainplastics.•Do not store the device in cold areas. When thedevice returns to its normal temperature, moisturecan form inside the device and damage electroniccircuit boards.•Do not attempt to open the device other than asinstructed in this guide.•Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards and finemechanics.•Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.•Do not paint the device. Paint can clog the movingparts and prevent proper operation.•Use a soft, clean, dry cloth to clean any lenses, suchas camera, proximity sensor, and light sensor lenses.•Use only the supplied or an approved replacementantenna. Unauthorised antennas, modifications, orattachments could damage the device and mayviolate regulations governing radio devices.•Use chargers indoors.•Always create a backup of data you want to keep,such as contacts and calendar notes.•To reset the device from time to time for optimumperformance, power off the device and remove thebattery.These suggestions apply equally to your device,battery, charger, or any enhancement. If any device isnot working properly, take it to the nearest authorisedservice facility for service.Part name Toxic or hazardous Substances and ElementsLead (Pb) Mercury(Hg)Cadmium(Cd)HexavalentChromium (Cr6+)Polybrominatedbiphenys (PBB)Polybrominateddiphenyl ethers(PBDE)87CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Phone x O O O O OBattery x O O O O OAccessories x O O O O OO: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this partis below the limit requirement in SJ/T 11363-2006.X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials usedfor this part is above the limit requirement in SJ/T 11363-2006.Notes: The reason for marking "X" is: there is currently no alternative technologies available.88CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Additional safety informationSmall childrenYour device and its enhancements may contain smallparts. Keep them out of the reach of small children.OperatingenvironmentThis device meets RF exposure guidelines when usedeither in the normal use position against the ear orwhen positioned at least 2.2 centimetres (7/8 inch)away from the body. When a carry case, belt clip, orholder is used for body-worn operation, it should notcontain metal and should position the device theabove-stated distance from your body.To transmit data files or messages, this device requiresa quality connection to the network. In some cases,transmission of data files or messages may be delayeduntil such a connection is available. Ensure the aboveseparation distance instructions are followed until thetransmission is completed.Parts of the device are magnetic. Metallic materialsmay be attracted to the device. Do not place creditcards or other magnetic storage media near the device,because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer of themedical device to determine if they are adequatelyshielded from external RF energy or if you have anyquestions. Switch off your device in health carefacilities when any regulations posted in these areasinstruct you to do so. Hospitals or health care facilitiesmay be using equipment that could be sensitive toexternal RF energy.Implanted medical devicesManufacturers of medical devices recommend that aminimum separation of 15.3 centimetres (6 inch)should be maintained between a wireless device andan implanted medical device, such as a pacemaker orimplanted cardioverter defibrillator, to avoid potentialinterference with the medical device. Persons whohave such devices should:•Always keep the wireless device more than 15.3centimetres (6 inch) from the medical device whenthe wireless device is turned on. 89CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
•Not carry the wireless device in a breast pocket.•Hold the wireless device to the ear opposite themedical device to minimise the potential forinterference.•Turn the wireless device off immediately if there isany reason to suspect that interference is takingplace.•Read and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consult yourhealth care provider.Hearing aidsSome digital wireless devices may interfere with somehearing aids. If interference occurs, consult yourservice provider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bag systems.For more information, check with the manufacturer, orits representative, of your vehicle or any equipmentthat has been added.Only qualified personnel should service the device orinstall the device in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty that may apply to the device. Check regularlythat all wireless device equipment in your vehicle ismounted and operating properly. Do not store or carryflammable liquids, gases, or explosive materials in thesame compartment as the device, its parts, orenhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do notplace objects, including installed or portable wirelessequipment in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Using your device while flying in aircraft is prohibited.Switch off your device before boarding an aircraft. Theuse of wireless teledevices in an aircraft may bedangerous to the operation of the aircraft, disrupt thewireless telephone network, and may be illegal.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey all signsand instructions. Potentially explosive atmospheresinclude areas where you would normally be advised toturn off your vehicle engine. Sparks in such areas couldcause an explosion or fire resulting in bodily injury oreven death. Switch off the device at refuelling pointssuch as near gas pumps at service stations. Observerestrictions on the use of radio equipment in fueldepots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress.90CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Areas with a potentially explosive atmosphere areoften, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities and areas where the air contains chemicals orparticles such as grain, dust, or metal powders. Youshould check with the manufacturers of vehicles usingliquefied petroleum gas (such as propane or butane) todetermine if this device can be safely used in theirvicinity.Emergency callsImportant: This device operates using radiosignals, wireless networks, landline networks, anduser-programmed functions. If your device supportsvoice calls over the internet (internet calls), activateboth the internet calls and the cellular phone. Thedevice will attempt to make emergency calls over boththe cellular networks and through your internet callprovider if both are activated. Connections in allconditions cannot be guaranteed. You should neverrely solely on any wireless device for essentialcommunications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength. Depending on yourdevice, you may also need to complete thefollowing:•Insert a SIM card if your device uses one•Remove certain call restrictions you haveactivated in your device.•Change your profile from offline or flight profilemode to an active profile.2. Press the end key as many times as needed to clearthe display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wirelessdevice may be the only means of communication at thescene of an accident. Do not end the call until givenpermission to do so.Certificationinformation (SAR)This mobile device meets guidelines for exposureto radio waves.Your mobile device is a radio transmitter and receiver.It is designed not to exceed the limits for exposure toradio waves recommended by internationalguidelines. These guidelines were developed by theindependent scientific organisation ICNIRP and includesafety margins designed to assure the protection of allpersons, regardless of age and health.The exposure guidelines for mobile devices employ aunit of measurement known as the Specific AbsorptionRate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over10 grams of tissue. Tests for SAR are conducted using91CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
standard operating positions with the devicetransmitting at its highest certified power level in alltested frequency bands. The actual SAR level of anoperating device can be below the maximum valuebecause the device is designed to use only the powerrequired to reach the network. That amount changesdepending on a number of factors such as how closeyou are to a network base station. The highest SARvalue under the ICNIRP guidelines for use of the deviceat the ear is 1.27 W/kg .Use of device accessories may result in different SARvalues. SAR values may vary depending on nationalreporting and testing requirements and the networkband. Additional SAR information may be providedunder product information at www.nokia.com.Your mobile device is also designed to meet therequirements for exposure to radio waves establishedby the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of1.6 W/kg averaged over one gram of tissue. The highestSAR value reported under this standard during productcertification for use at the ear is 1.09 W/kg and whenproperly worn on the body is 0.48 W/kg .92CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MANUFACTURER’S LIMITED WARRANTYThis Limited Warranty is in addition to, and does notaffect your legal (statutory) rights under yourapplicable national laws relating to the sale ofconsumer products.Nokia Corporation (“Nokia”) provides this LimitedWarranty to person who has purchased the Nokiaproduct(s) included in the sales package (“Product”).Nokia warrants to you that during the warranty periodNokia or a Nokia authorised service company will in acommercially reasonable time remedy defects inmaterials, design and workmanship free of charge byrepairing or, should Nokia in its absolute discretiondeem it necessary, replacing the Product in accordancewith this Limited Warranty (unless otherwise requiredby law). This Limited Warranty is only valid andenforceable in the country where you have purchasedthe Product provided that it is intended for sale in thatcountry.Warranty periodThe warranty period starts at the time of Product'soriginal purchase by the first end-user. The Productmay consist of several different parts and differentparts may be covered by a different warranty period(hereinafter “Warranty Period”). The differentWarranty Periods are:a) twelve (12) months for the mobile device andaccessories (whether included in the mobile devicesales package or sold separately) other than theconsumable parts and accessories listed in (b) and (c)below;b) six (6) months for the following consumable partsand accessories: batteries, chargers, desk stands,headsets, cables and covers; andc) ninety (90) days for the media on which any softwareis provided, for example, CD-ROM or memory cardAs far as your national laws permit, the WarrantyPeriod will not be extended or renewed or otherwiseaffected due to subsequent resale, repair orreplacement of the Product. However, repaired part(s)will be warranted for the remainder of the originalWarranty Period or for sixty (60) days from the date ofrepair, whichever is longer.93CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
How to get warrantyserviceIf you wish to make a claim under the LimitedWarranty, you may call the Nokia call center (where thisis available and please note national rates apply tocalls) and/or where necessary, return your Product orthe affected part (if it is not the entire Product) to aNokia care centre or Nokia designated service location.Information about Nokia care centres, Nokiadesignated service locations and Nokia call centres canbe found at local Nokia web pages where available.You must return your Product or the affected part (if itis not the entire Product) to a Nokia care center orNokia designated service location before the expiry ofthe Warranty Period.When making a Limited Warranty claim you have topresent: a) the Product (or affected part thereto), b) thelegible and unmodified original proof of purchase,which clearly indicates the name and address of theseller, the date and place of purchase, the product typeand the IMEI or other serial number.This Limited Warranty extends only to the original firstend-user of the Product and is not assignable ortransferable to any subsequent purchaser/end-user.What is not covered?1. This Limited Warranty does not cover user manualsor any third party software, settings, content, data orlinks, whether included/downloaded in the Product,whether included during installment, assembly,shipping or at any other time in the delivery chain orotherwise and in any way acquired by you. To theextent permitted by applicable law(s), Nokia does notwarrant that any Nokia software will meet yourrequirements, will work in combination with anyhardware or software applications provided by a thirdparty, that the operation of the software will beuninterrupted or error free or that any defects in thesoftware are correctable or will be corrected.2. This Limited Warranty does not cover a) normal wearand tear (including, without limitation, wear and tearof camera lenses, batteries or displays), b) transportcosts, c) defects caused by rough handling (including,without limitation, defects caused by sharp items, bybending, compressing or dropping, etc.), d) defects ordamage caused by misuse of the Product, including usethat is contrary to the instructions provided by Nokia(e.g. as set out in the Product's user guide) and/or e)other acts beyond the reasonable control of Nokia.3. This Limited Warranty does not cover defects oralleged defects caused by the fact that the Product wasused with, or connected to, a product, accessories,software and/or service not manufactured, supplied orauthorised by Nokia or was used otherwise than for itsintended use. Defects can be caused by viruses fromyour or from a third party's unauthorised access toservices, other accounts, computer systems ornetworks. This unauthorised access can take placethrough hacking, password-mining or through avariety of other means.4. This Limited Warranty does not cover defects causedby the fact that the battery has been short-circuited orby the fact that the seals of the battery enclosure or the94CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
cells are broken or show evidence of tampering or bythe fact that the battery has been used in equipmentother than those for which it has been specified.5. This Limited Warranty does not apply if the Producthas been opened, modified or repaired by anyoneother than an authorised service centre, if it is repairedusing unauthorised spare parts or if the Product’s serialnumber, the mobile accessory date code or the IMEInumber has been removed, erased, defaced, altered orare illegible in any way and this shall be determined inthe sole discretion of Nokia.6. This Limited Warranty does not apply if the Producthas been exposed to moisture, to dampness or toextreme thermal or environmental conditions or torapid changes in such conditions, to corrosion, tooxidation, to spillage of food or liquid or to influencefrom chemical products.Other importantnoticesA third party, independent operator provides the SIMcard and cellular and/or other network or system onwhich the Product operates. Therefore, Nokia will notaccept responsibility under this warranty for theoperation, availability, coverage, services or range ofthe cellular or other network or system. Before theProduct can be repaired or replaced, the operator mayneed to unlock any SIM-lock or other lock that may havebeen added to lock the product to a specific networkor operator. Accordingly, Nokia does not acceptresponsibility for any delays in warranty repairs or forthe inability of Nokia to complete warranty repairs thatare caused by the operator's delay or failure to unlockany SIM-lock or other lock.Please remember to make backup copies or keepwritten records of all important content and datastored in your Product, because content and data maybe lost during repair or replacement of the Product.Nokia, in a manner consistent with the provisions ofthe section entitled “Limitation of Nokia's Liability”below, to the extent permitted by applicable law(s),shall not under any circumstances be liable, eitherexpressly or implied, for any damages or losses of anykind whatsoever resulting from loss of, damage to, orcorruption of, content or data during repair orreplacement of the Product.All parts of the Product or other equipment that Nokiahas replaced shall become the property of Nokia. If thereturned Product is found not to be covered by theterms and conditions of the Limited Warranty, Nokiaand its authorised service companies reserve the rightto charge a handling fee. When repairing or replacingthe Product, Nokia may use products or parts that arenew, equivalent to new or reconditioned.Your Product may contain country specific elements,including software. If the Product has been re-exportedfrom its original destination country to anothercountry, the Product may contain country specificelements that are not considered to be a defect underthis Limited Warranty.95CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Limitation of Nokia'sliabilityThis Limited Warranty is your sole and exclusiveremedy against Nokia and Nokia's sole and exclusiveliability in respect of defects in your Product. However,this Limited Warranty shall neither exclude nor limit i)any of your legal (statutory) rights under the applicablenational laws or ii) any of your rights against the sellerof the Product.This Limited Warranty replaces all other Nokiawarranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise,including, without limitation, and where permitted byapplicable law, any implied conditions, warranties orother terms as to satisfactory quality or fitness forpurpose. To the extent permitted by applicable law(s)Nokia does not assume any liability for loss of ordamage to or corruption of data, for any loss of profit,loss of use of Products or functionality, loss of business,loss of contracts, loss of revenues or loss of anticipatedsavings, increased costs or expenses or for any indirectloss or damage, consequential loss or damage orspecial loss or damage. To the extent permitted byapplicable law, Nokia’s liability shall be limited to thepurchase value of the Product. The above limitationsshall not apply to death or personal injury resultingfrom Nokia’s proven negligence.Statutory obligationsThis Limited Warranty must be read subject to anystatutory provisions that imply warranties orconditions into this Limited Warranty that cannot beexcluded, restricted or modified or cannot be excluded,restricted or modified except to a limited extent. If suchstatutory provisions apply, to the extent to which Nokiais able to do so, its liability under those provisions willbe limited, at its option to, in the case of goods: thereplacement of the goods or the supply of equivalentgoods, the repair of the goods, the payment of the costof replacing the goods or of acquiring equivalentgoods, or the payment of the cost of having the goodsrepaired; and in the case of services: the supplying ofthe services again or the payment of the cost of havingthe services supplied again.Note: Your Product is a sophisticated electronicdevice. Nokia strongly encourages you to familiariseyourself with the user guide and instructions providedwith and for the Product. Please also note that theProduct might contain high precision displays, cameralenses and other such parts, which could be scratchedor otherwise damaged if not handled very carefully.All warranty information, product features andspecifications are subject to change without notice.Nokia CorporationKeilalahdentie 2-4FIN-02150 EspooFinland96CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
How to obtain an English Nokia E71 UserGuideNokia understands from consumer feedback in PRC thatthere is only limited usage of the English User Guide.In consideration of this and to help conserve naturalresources, Nokia has selected to not to include the EnglishUser Guide in the Nokia E71 Sales Package.To obtain a Nokia E71 User Guide in English, please kindlydownload it from: www.nokia.com.cn/englishUGThe feature descriptions in English User Guide may vary bymarket, thus the device features described in the EnglishUser Guide you have obtained may differ from those shownon the display in English user interface.97CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
IndexAaccess pointscreating 80VPN 74Active notes 52alarm clock 55alert tones 77altitude calibration 51animated screen saver 63antennas 14application settings 81applicationscommon actions 18installing 73attachmentse-mail 36autolock period 78Bbackground image 63backing up data 72batterycharge level 17charging 13inserting 12Bluetoothauthorising devices 66pairing 66passcode 66receiving data 65security 67sending data 65bookmarks 44browsingintranet 45offline 44web 43Ccable 64cacheemptying 44Calculator 52Calendarsettings 26calendar entriescreating 25viewing 25calendar key 24calendar viewschanging 25caller ID 79callsanswering 29call waiting 79caller ID 79conference call 30fixed dialling 70making 29muting the ringing tone 29rejecting 29rejecting with textmessage 79selecting type 79settings 79speed dialling 30voice commands 31voice dialling 31voice mail 30cameracapturing images 58toolbar 58video clips 58certificatesdetails 71settings 72charging the battery 13Clockalarms 55settings 55conference calls 30configuration messages 81connection methodsBluetooth 65data cable 64modem 67connectionsending 68GPRS settings 46PC connection 46connectors 1098CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
contact groupsadding ringing tones 28creating 27making conference calls 27contactsadding 27adding ringing tones 28searching 27contacts directoriesmanaging 27contacts key 24convertingcurrencies 54measurements 54currency conversions 54Ddatesettings 77decryptingdevice memory and memorycard 70destinationremoving 51setting 51displaychanging the look 63indicators 17settings 76Download!managing items 45Ee-mailautomatic retrievalsettings 41connecting to mailbox 35connection settings 40creating folders 37deleting 37replying 36retrieval settings 41sending 36user settings 40writing 36e-mail key 25e-mail key settings 78e-mail setup 35e-mail wizard 35encryptingdevice memory and memorycard 70endinginternet connections 44network connections 68enhancementssettings 78FFile manager 53filesdownloading 60sending 53fixed dialling 70free memory 20GGallery 60Genuine enhancements 83GPRSaccess point settings 46settings 80Hheadsetconnecting 14home key 24home screen 23, 24settings 63, 76switching 24IIM 38imagesrotating 61zooming 61indicators 17insertingbattery 12memory card 13SIM card 12installation log 73installingapplications 73Instant messaging 38internet 43ending connections 44intranetbrowsing 45 99CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Jjad files 73jar files 73Java applications 73Kkeyguard 19keypadlock settings 78locking 19tones 77keys 10shortcuts 76Llandmarkscreating 51languagesettings 77lock code 69, 78locking device 69device autolock 78keypad 19, 78Log 32adding numbers toContacts 32deleting 32logosoperator logo 76welcome logo 76Lunar calendar 26Mmailboxesconnecting 35making a call 29Maps 48, 49browsing 49finding locations 50indicators 49routes 50measurementsconverting 54measuring systemchanging 51memory 20memory cardbacking up data 72ejecting 14formatting 20inserting 13locking 69microSD 20passwords 69setting password 20, 53unlocking 20menu 16messages 34call rejection messages 79configuration messages 81other settings 41text message settings 39Messagingfolders 34microSDHC 20modem 46, 67multimedia messagescreating 38sending 38settings 39multitasking 28Music playerMusic Store 60playing 59playlists 59transferring music 60Music Store 60Nnetwork settings 79Notes 56notification light 77OOne-touch keys 77operatorlogo 76selecting 79original settings 79Ppacket dataaccess point settings 46settings 80pairingdevices 66passcode 66100CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
passwordsmemory card password 20,53PDF reader 54personalisation 63changing language 77display 76home screen 76tones 77PIN codechanging 78positioningsettings 48predictive text input 77printing 54profilescreating 62customising 62selecting ringing tones 62PTT 32push to talk 32QQuickoffice 53Rremote lock 69remote synchronisation 74restoring original settings 79ringing tones 77contacts and contactgroups 28in profiles 62vibrating alert 77Ssatellite signal strength 51savingcurrent position 51files 18settings 18screen saver 63, 76search modesswitching 27securityBluetooth 67device and SIM card 78memory card 69sendingfiles 18, 53using Bluetooth 65session initiation protocolSee SIPsettingsapplications 81Calendar 26calls 79certificate 72clock 55date 77display 76e-mail connection 40e-mail key 78e-mail retrieval 41e-mail user 40enhancements 78GPRS 46, 80home screen 76keypad lock 78language 77multimedia messages 39network 79packet data 80positioning 48restoring 79SIP 80text messages 39time 77tones 77web 44shortcuts 82keys 76signal strength 17SIM cardinserting 12SIPcreating profiles 80editing profiles 80settings 80sis files 73sisx files 73software packagesinstalling 73speed dialling 30standby modesettings 76switching device on and off 15Symbian applications 73synchronisation synchronisation profiles 74Ttabs 18 101CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
textchanging size 76text messagessending 37settings 39writing 37themeschanging 63timesettings 77tones 77settings 77toolbarcamera 58transferring data 17trip destination 51trip meter 51UUSB data cable 64Vvibrating alert 77virtual private networkaccess points 74use in applications 75Voice aid 30voice mailcalling 30changing number 30volume 19VPNaccess points 74use in applications 75Wwarning tones 77Webconnection security 43websettings 44welcome note 76ZZip manager 54102CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack

Navigation menu