Microsoft RM-67 GSM 900/ 1800/ 1900/wcdma2100 PCS Phone with BT User Manual 831 Exhibit08 User Guide 01

Microsoft Mobile Oy GSM 900/ 1800/ 1900/wcdma2100 PCS Phone with BT 831 Exhibit08 User Guide 01

Contents

Manual

Nokia XXX User Guide9237522ISSUE 1 EN DRAFTR1114_en.book  Page 1  Friday, September 16, 2005  9:36 AM
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-67 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/Copyright © 2005 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.This product includes software licensed from Symbian Software Ltd (c) 1998-200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.MPEG-4This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.Export ControlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.  Diversion contrary to law is prohibited.FCC / INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.ISSUE 1 EN, 9237522legal-information1.fm  Page 2  Thursday, September 22, 2005  11:19 AM
3For your safety...........................................6Your Nokia N71.........................................9Essential indicators...............................................................9Attach the wrist strap........................................................10Configure settings...............................................................10Nokia support on the Web................................................10Help .........................................................................................10Clock........................................................................................11Volume and loudspeaker control ....................................12File manager .........................................................................12Useful shortcuts...................................................................14Personalise your device .......................... 15Profiles—Set tones...............................................................16Transfer content from another device...........................17Change the look of your device.......................................17Active standby mode..........................................................18Make calls ............................................... 20Voice calls..............................................................................20Video calls..............................................................................22Video sharing .......................................................................23Answer or reject a call.......................................................26Log ...........................................................................................28Contacts (Phonebook).............................31Save names and numbers.................................................31Copy contacts.......................................................................32Add ringing tones for contacts .......................................33Create contact groups .......................................................33Camera......................................................36Take pictures.........................................................................36Edit images ...........................................................................41Tips on taking good photographs...................................42Record videos .......................................................................43Edit video clips.....................................................................45Gallery.......................................................50View images and video clips............................................50View presentations .............................................................51Albums ...................................................................................51Imaging.....................................................64Image print ...........................................................................64RealPlayer™...........................................................................65Movie Director .....................................................................67Messaging.................................................69Write text..............................................................................70Write and send messages .................................................72R1114_en.book  Page 3  Friday, September 16, 2005  9:36 AM
4Inbox—receive messages................................................... 75My folders ............................................................................ 76Mailbox.................................................................................. 76Outbox—messages waiting to be sent.......................... 79View messages on a SIM card......................................... 79Messaging settings............................................................. 79Calendar....................................................85Create calendar entries .....................................................85Calendar views..................................................................... 86Remove calendar entries................................................... 86Calendar settings ................................................................ 87Web...........................................................88Access the Web ................................................................... 88Bookmarks view................................................................... 89Make a connection............................................................. 89Browse.................................................................................... 90Download and purchase items........................................ 92End a connection ................................................................ 92Web settings......................................................................... 92Office........................................................94Calculator.............................................................................. 94Converter............................................................................... 94To-do ...................................................................................... 95Notes ...................................................................................... 95Recorder................................................................................. 96My own.....................................................97Go to—add shortcuts.......................................................... 97IM—Instant messaging (chat)  ........................................97Visual Radio .......................................... 104Listen to the radio.............................................................105View visual content..........................................................105Saved stations....................................................................105Settings................................................................................106Connectivity .......................................... 107Bluetooth connection......................................................107PC connections ..................................................................110Connection manager........................................................111Remote synchronisation..................................................112Device manager.................................................................113Tools....................................................... 115Settings................................................................................115Cover display settings......................................................124Voice commands ...............................................................124Memory card tool..............................................................125Application manager........................................................126Activation keys—handle copyright-protected files .128R1114_en.book  Page 4  Friday, September 16, 2005  9:36 AM
5Troubleshooting .................................... 129Q&A...................................................................................... 129Battery information.............................. 132Charging and discharging.............................................. 132Nokia battery authentication guidelines................... 132Care and maintenance ......................... 134Additional safety information............. 135R1114_en.book  Page 5  Friday, September 16, 2005  9:36 AM
6For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLING Do not use the phone at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the phone where blasting is in progress.USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICE Only qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCE Your phone is not water-resistant. Keep it dry.BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.R1114_en.book  Page 6  Friday, September 16, 2005  9:36 AM
7CONNECTING TO OTHER DEVICES Whenconnecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLS Ensure the phone is switched on and in service. The keypad is active only in the Fold open mode. Press   as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press  . Give your location. Do not end the call until given permission to do so.About your deviceThe wireless device described in this guide is approved for use on the EGSM 900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.Network ServicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Network features are designated in this guide by (network services).Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading via R1114_en.book  Page 7  Friday, September 16, 2005  9:36 AM
8browser or over MMS, require network support for these technologies.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3 and AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the charger adapter CA-44 delivered with your phone.The battery intended for use with this device is BL-5B.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.R1114_en.book  Page 8  Friday, September 16, 2005  9:36 AM
Your Nokia NXX9Your Nokia NXXSettingsYour Nokia NXX normally has MMS, GPRS, streaming, and Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.Transfer content from another deviceYou can copy content such as contacts and calendar entries from a compatible Nokia phone to your Nokia NXX using Bluetooth connectivity or infrared. The type of content that can be copied depends on the phone model.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.You can insert your SIM card in the other device. When Nokia N80 is switched on without a SIM card, the offline profile is automatically activated.To avoid duplicate entries, you can transfer the same type of information (for example, contacts) from the other device to your Nokia XXX only once.Transfer content1Press  , and select Tools >Transfer >Copy data on your Nokia XXX.2In the information view, select Continue.3Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type.4If you select Bluetooth connectivity:To have Nokia XX search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia XXX. Enter a code (1-16 digits), and select OK.Enter the same code on the other device, and select OK. The devices are now paired. See ‘Pair devices’, p. 78.For some phone models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display.If you select infrared, connect the two devices. See ‘Infrared connection’, p. 79.R1114_en.book  Page 9  Friday, September 16, 2005  9:36 AM
Your Nokia NXX105From your Nokia XXX, select the content you want to copy from the other device.Content is copied from the memory and memory card (if inserted) of the other device to the corresponding location in your Nokia XXX and memory card (if inserted). Copying time depends on the amount of data to be transferred. You can cancel copying and continue later.Essential indicators The device is being used in a GSM network. The device is being used in a UMTS network (network service). You have one or more unread messages in the Inboxfolder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outboxfolder. You have missed calls. Shown if Ringing type is set to Silent and Message alert tone,IM alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number. If you have two phone lines (network service), the indicator for the first line is   and for the second . A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A loopset is connected to the device. A TTY is connected to the device. A data call is active.  A GPRS or EDGE packet data connection is available. A GPRS or EDGE packet data connection is active.  A GPRS or EDGE packet data connection is on hold. A UMTS packet data connection is available. A UMTS packet data connection is active. A UMTS packet data connection is on hold. Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. A USB connection is active.R1114_en.book  Page 10  Friday, September 16, 2005  9:36 AM
Your Nokia NXX11 An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.Keypad lock (keyguard)To lock the keys, close the sliding keypad, and select Yeswhen Lock keypad? is displayed. To lock the keys when the slide is closed, press the power key, and select Lockkeypad.To unlock, open the sliding keypad, or press   (Unlock),and select OK when Unlock keypad? is displayed.When the keypad lock is on, calls may be possible to the official emergency number programmed into your device. Volume and loudspeaker controlTo increase or decrease the volume level when you have an active call or are listening to a sound, press   or  .The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, select Options >Activate loudsp..To turn off the loudspeaker, select Options >Activate handset.ClockPress , and select Clock. To set a new alarm, select Options >Set alarm. When an alarm is active,   is shown.To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.To cancel an alarm, select Clock >Options >Remove alarm.R1114_en.book  Page 11  Friday, September 16, 2005  9:36 AM
Your Nokia NXX12Clock settingsTo change the clock settings, select Clock >Options >Settings.To change the time or date, select Time or Date.To change the clock shown in the standby mode, select Clock type >Analog or Digital.To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Auto time update >On.To change the alarm tone, select Clock alarm tone.World clockTo open the world clock view, open Clock, and press  . In the world clock view, you can view the time in different cities.To add cities to the list, select Options >Add city. You can add a maximum of 15 cities to the list.To set your current city, scroll to a city, and select Options >My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.HeadsetConnect a compatible headset to the Pop-PortTMconnector of your device.Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Wrist strapThread the strap as shown, and tighten it.Memory cardYou can purchase a compatible miniSD memory card and use it as extra storage space to save the memory on your device. You can also back up information from your device to the memory card.R1114_en.book  Page 12  Friday, September 16, 2005  9:36 AM
Your Nokia NXX13Use only compatible miniSD memory cards with this device. Other memory cards, such as Reduced Size MultiMediaCards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.Keep all memory cards out of the reach of small children.Insert the memory card1To insert the memory card, place your finger in the recess on top of the door of the memory card slot, and open the door.2Insert the memory card in the slot. Make sure that the contact area on the card is facing up and towards the slot with the bevelled corner facing the base of the device.3Push the card in. You can hear a click when the card locks into place.4Close the door. You cannot use the memory card if the door is open.Eject the memory card1Before you eject the card, press the power key, and select Remove mem. card. All applications are closed.2When Remove memory card and press 'OK' is displayed, open the door of the memory card slot.3Press the memory card to release it from the slot.4Remove the memory card. If the device is switched on, select OK.Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.Memory card toolPress , and select Tools >Memory. You can use a miniSD memory card as extra storage space and for backing up the information in the device memory.R1114_en.book  Page 13  Friday, September 16, 2005  9:36 AM
Your Nokia NXX14To back up information from the device memory to a memory card, select Options >Backup phone mem.To restore information from the memory card to the device memory, select Options > Restore from card.Format a memory cardWhen a memory card is reformatted, all data on the card is permanently lost.Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Options >Format mem. card. Select Yes to confirm.File managerMany features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.You can use a memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.To browse files and folders in the device memory or on a memory card (if inserted), press  , and select Tools >File mgr.. The device memory view ( ) opens. Press   to open the memory card view ( ) (if available).To move or copy files to a folder, press   and   at the same time to mark a file, and select Options >Move to folder or Copy to folder.To find a file, select Options >Find and the memory from which to search, and enter a search text that matches the file name.View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options >Memory details. The amount of available free memory is shown in Free memory.Memory low—free memoryThe device notifies you if the device or the memory card memory is low.To free device memory, transfer data to a memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card, and a folder.R1114_en.book  Page 14  Friday, September 16, 2005  9:36 AM
Your Nokia NXX15You can also transfer media files to a compatible PC, for example, using the transfer option in Gallery. See ‘Gallery’, p. 29.  Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data.To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:• Messages from Inbox,Drafts, and Sent folders in Messaging• Retrieved e-mail messages from the device memory• Saved Web pages• Saved images, videos, or sound files• Contact information•Calendar notes• Downloaded applications. See also ‘Application manager’, p. 98.• Any other data that you no longer needUseful shortcutsUse shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions.Standby mode• To switch between applications that are open, press and hold  , and select an application. If memory is low, the device may close some applications. The device saves any unsaved data before closing an application.Leaving applications running in the background increases the demand on battery power and reduces the battery life.• To start the camera, press and hold the capture key for more than 1 second.• To call your voice mailbox (network service), press and hold .• To open multimedia applications, press or press and hold  . See ‘ICON- Media key’, p. 88.• To change the profile, press  , and select a profile.• To switch between Normal and Silent profiles, press and hold  . If you have two phone lines, this action switches between the two lines.• To open the last dialed numbers list, press  .• To use voice commands, press and hold  .• To start a connection to Web, press and hold  . See ‘Web’, p. 64.For further shortcuts available in the standby mode, see ‘Active standby mode’, p. 87.R1114_en.book  Page 15  Friday, September 16, 2005  9:36 AM
Your Nokia NXX16Edit text and lists• To mark an item in a list, scroll to it, and press   and  at the same time.• To mark multiple items in a list, press and hold   while you press   or  . To end the selection, release , then release  .• To copy and paste text: To select letters and words, press and hold  . At the same time, press   or   to highlight text. To copy the text to clipboard, while still holding  , select Copy. To insert the text into a document, press and hold  , and select Paste.HelpYour device has context-sensitive help. When an application is open, select Options >Help to access help for the current view.When you are reading the instructions, to switch between help and the application that is open in the background, press and hold  .To open help from the main menu, select Tools >Help.Select the desired application to view its help topics.TutorialThe tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press  , and select My own >Tutorial and the section you want to view.R1114_en.book  Page 16  Friday, September 16, 2005  9:36 AM
Camera17CameraYour Nokia Nxx has two cameras, a high resolution camera on the back of the device, and a lower resolution camera above the main display, which is visible when the cover is opened. Both cameras can be used to take still pictures and video.To activate the camera, open the cover, and select Camera.In the viewfinder, you can see the view to be captured. To switch between cameras, select Options > Use front camera or back camera.The images and video clips are automatically saved in the Gallery. The cameras produce .jpeg images. Video clips are recorded in the .3gpp file format with the .3gp file extension (Normal and Sharing video quality modes) or in the .mp4 file format (High video quality mode). See ‘Video settings’, p.17.You can send images in a multimedia message as an e-mail attachment, or by using a Bluetooth connection. Tip! You can insert an image into a contact card. See ‘Save names and numbers’, p.61Your Nokia Nxx supports an image capture resolution of up to 1600 x 1200 pixels using the back camera. The image resolution in these materials may appear different.Take picturesIf the camera is in video mode, open the image mode by selecting Options > Image mode.To select the front camera to, for example, include yourself in the picture, select Options > Use front camera. To use the main camera again, select Options > Use back camera.To take a picture, press  . Do not move the phone before the image is saved. The image is saved automatically in the Images&Video folder of Gallery. See ‘Gallery’, p. 29.To view the Last image, to select Image scenes, or to adjust Flash or White balance settings before taking a picture:• If the viewfinder is active, press   or   to activate the camera setup settings.R1114_en.book  Page 17  Friday, September 16, 2005  9:36 AM
Camera18•Press  or  to choose the item to be viewed or adjusted, and press  . The settings available depend on which camera is selected??.• To re-activate the viewfinder, press Cancelor .See ‘Setup settings—Adjust colour and lighting’, p. 12, and ‘Scenes’, p. 12.Imaging mode camera indicators show the following:• The phone memory ( ) and memory card ( ) indicators (1) show where images are saved.• The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your phone or the memory card.• The scene indicator (3) shows the active scene. See ‘Scenes’,p. 12.• The flash indicator (4) shows if the flash is set to Automatic (AF), , On (), or Off ().• The night mode indicator (5) shows that night mode is active.• The self-timer indicator (6) shows that theself-timer is activated. See ‘You in the picture—self-timer’, p. 11.• The sequence mode indicator (7) shows that the sequence mode is active. See ‘Take pictures in a sequence’, p. 11.Press   or   to zoom in and zoom out. The zoom indicator, which appears on the side of the viewfinder, shows the zoom level.Saving the captured image may take longer if you change the zoom, lighting, or colour settings.When taking a picture, note the following:• Keep the camera still by using both hands.• To take images in different environments, use the proper scene for each environment. See ‘Scenes’, p. 12.• The quality of a zoomed picture is lower than that of a non-zoomed picture.Graphic: Screenshot to indicate the setup (lower) part of the screen being active.Graphic: Screenshot to show position of the indicators (to be numbered).R1114_en.book  Page 18  Friday, September 16, 2005  9:36 AM
Camera19• The camera goes into battery saving mode if you do not make any key presses for a while. To continue taking pictures, press  .After the image is taken: • If you do not want to keep the image, select Options > Delete.• To send the image Via multimedia,Via e-mail, or ViaBluetooth, select Options > Send. For more information, see ‘Messaging’, p. 38 and ‘Bluetooth connectivity’, p. 76. This option is not available during an active call.• To send an image to the other party during an active call, select Options > Send to caller.• To edit the picture, select Options > Edit. See ‘Edit images’, p. 14.• To print the picture, select Options > Print. See ‘Image print’, p. 33.Take pictures in a sequenceSelect Options > Time lapse to set the camera to take six pictures in a sequence. You can set the time lapse to be Fast,Med or Slow.The pictures are automatically saved in Gallery.You can also use the sequence mode with the Self-timer. See ‘You in the picture—self-timer’, p. 11. After taking the pictures, they are shown in a grid on the main display. To view a picture, press   to open it.To return to the sequence mode viewfinder, press ????.You in the picture—self-timerUse the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Self-timer > 10 seconds,20 seconds or 30 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the phone beeps when the timer is running. The camera takes the picture after the selected delay has elapsed. You can also use the Self-timer in the sequence mode. See ‘Take pictures in a sequence’, p. 11.The flashKeep a safe distance when using the flash. Do not use the flash on people or animals at close range.  Do not cover the flash while taking a picture.Graphic: Screenshot to show a grid of pictures in Gallery.R1114_en.book  Page 19  Friday, September 16, 2005  9:36 AM
Camera20The camera has an LED flashlight for low light conditions. The following flashlight modes are available: Automatic,On, and Off.To use the flash, press   or   to highlight Flash and select On.If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture.Setup settings—Adjust colour and lightingTo enable the camera to reproduce colours and lighting more accurately, or to add effects to your pictures or videos, select Options > Open setup and select from the following:Video scenes/Image scenes—Select a scene which is appropriate for the environment in which you are taking pictures. See ‘Scenes’, p. 12.Flash (images only)—Set the flash according to the lighting conditions. See ‘The flash’, p. 11.White balance—Select the appropriate setting which matches the lighting conditions. This allows the camera to reproduce colours more accurately.Colour tone—Select the colour effect you want.The display changes to match any settings made.The settings return to the default settings when you close the camera. If you select a new scene, the settings are replaced by the settings of the selected scene. See ‘Scenes’, p. 12. If you need to change the setup settings, however, you can change them after selecting a scene.The settings available will vary depending on whether you have the front or main camera selected.ScenesA scene helps you to obtain the correct colour and lighting settings for the current environment. Select the appropriate scene for taking pictures or recording video clips from the scenes list. The settings of each scene have been set to match a certain style or environment. Select Options > Open setup > Video scenes/Image scenes:Video scenesNormal (default)—Use this scene in any conditions.Night—Use this scene in low light conditions. The night mode is indicated with  .Image scenesAutomatic (default)—Use this scene in any conditions.R1114_en.book  Page 20  Friday, September 16, 2005  9:36 AM
Camera21User defined—Use this scene to create a personalised scene with your own settings.Portrait—Use this scene to take portrait pictures, such as head shots and sitting poses.Landscape—Use this scene when you take pictures of objects that are further away.Night—Use this scene in low light conditions. The night mode is indicated with  .Sports—Use this scene to take pictures of fast moving objects. Note that when you use this scene, the resolution of the images is reduced from 1600x1200 to 800x600. See ‘Picture quality’, p.14.When taking pictures, the default scene is Automatic. If you select the User defined scene however, it is set as the default scene.To make your own scene suitable for a certain environment, select User defined scene. In the user scene you can adjust Based on mode,Flash,White balance, and Colour tone, and Reset user scene options. To copy the settings of another scene, select Based on mode and the desired scene.Adjust still image camera settingsThere are two kinds of settings for the still image camera: Image setup settings and main settings. To adjust Imagesetup settings, see ‘Setup settings—Adjust colour and lighting’, p. 12. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Image quality—High 2M - Print (resolution 1600x1200), Med 0.8M - Email (resolution 800x600) or Low 0.3M - Multimedia (resolution 640x480). The better the image quality, the more memory the image consumes. Use High2M - Print for large prints up to 10x8in /25x20cm, Med 0.8M - Email for e-mail and prints up to 6x4in/15x10cm, or Low 0.3M - Multimedia for use in a multimedia message. The quality of a zoomed picture is lower than that of a nonzoomed picture.Add to album—Select whether you want to save the image to a certain album in the gallery. If you select Yes,a list of available albums opens.Extended zoom—Select On if you want to achieve maximum zoom but are prepared to accept lower image resolution (this may then be lower than you have selected with the Image quality setting. If you want to limit the Graphic: Screenshot to show landscape scene?? See Gromit.R1114_en.book  Page 21  Friday, September 16, 2005  9:36 AM
Camera22zoom to where the selected image resolution/quality is maintained, select On. IS THIS CORRECT??Show captured image—Select On if you want to see the captured image after it is taken, or Off if you want to continue taking pictures immediately.Capture tone—Select Click or Beep as the tone you hear when you take a picture..Memory in use—Select where to store your images.Edit imagesTo edit the pictures after taking them, or the ones already saved in Gallery, select Images & Videos > Options > Edit, and scroll to an image.Select Options > Apply effect to, for example, crop and rotate the image; adjust the brightness, colour, contrast, compression, and resolution; also, to add effects, text, clip art, or a frame to the picture.To crop an image, select Options > Apply effect > Crop.A cross appears on the upper right corner of the image. Select the area to be cropped by moving the scroll key, and select Set. Another cross appears on the lower left corner. Again select the area to be cropped. The selected areas form a rectangle, which forms the cropped image.To reduce redness of the eyes in an image, select Options >Apply effect > Red eye reduction. Move the cross onto the eye, and press the scroll key. A loop appears on the display. To resize the loop to fit the size of the eye, move the scroll key. Press the scroll key to reduce the redness.To add clip art to an image, select Options > Apply effect >Clip art. Select the item you want to add from the list, and press the scroll key. To move, rotate, and change the size of the item, select Options > Move,Resize, or Rotate.To add text to an image, select Options > Apply effect > Text. Enter the text, and select OK. To edit the text, select Options > Move,Resize,Rotate, or Colour.Shortcuts in the image editor:• To view an image in full screen, press   . To return to the normal view, press   again.• To rotate an image clockwise or counterclockwise, press.  and .• To zoom in or zoom out, press   and  .Tips on taking good photographsPicture qualityUse the appropriate picture quality. The camera has four picture quality settings: Fine (1600x1200), Standard R1114_en.book  Page 22  Friday, September 16, 2005  9:36 AM
Camera23(800x600), Basic (640x480) and MMS (xx??.). Use the Finesetting to make sure that the camera produces the best picture quality available. Note however, that better picture quality requires more storage space. For MMS and e-mail attachments it may be necessary one of the other settings???. To define the quality in the image mode in the camera, select Options > Settings..BackgroundUse a simple background. For portraits and other pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera, or the subject, when these conditions cannot be met. Move the camera closer to the object to take clearer portraits.DepthWhen taking pictures of landscapes, add depth to your pictures by placing objects in the foreground. Note however, that if the foreground object is too close to the camera, it may be blurred.Lighting conditionsChanging the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions:•Light source behind the subject. Avoid placing your subject in front of a strong light source. If the light source is behind the subject or visible in the display, the resulting picture may have weak contrast, may be too dark, and may contain unwanted lighting effects. You can use the flash to add more lighting to shadows. See ‘The flash’, p. 11.•Sidelit subject. Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. •Light source in front of the subject. Harsh sunlight may cause the subjects to squint their eyes. The contrast may also be too high.•Optimal lighting is found in situations where there is plenty of diffused, soft light available; for example, on a bright, partially cloudy day or on a sunny day in the shadow of trees. Record videosIf the camera is in image mode, select video mode by selecting Options > Video mode.To select the front camera to, for example, include yourself in the video, select Options > Use front camera.To use the main camera again, select Options > Use back camera.R1114_en.book  Page 23  Friday, September 16, 2005  9:36 AM
Camera241Press the scroll key to start recording. The record icon  is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video.2To pause recording at any time, select Pause. The pause icon   blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute.3Select Continue to resume recording. 4Select Stop to stop recording. The video clip is automatically saved to the Images&Video folder of Gallery. See ‘Gallery’, p. 9.To view the Last video clip, to select Video scenes, or to adjust White balance or Colour tone before recording a video: • If the viewfinder is active, press   or   to activate the camera setup settings.•Press  or  to choose the item to be viewed or adjusted, and press  . The settings available depend on which camera is selected.• To re-activate the viewfinder, press Cancel or  .See ‘Setup settings—Adjust colour and lighting’, p. 12, and ‘Scenes’, p. 12.Video recorder indicators show the following - ED: WHAT ARE THE ACTUAL ISETTA ICONS?. • The phone memory ( ) and memory card ( ) indicators (1) show where the video is saved.• The current video length indicator (2) shows elapsed time and time remaining.• The mode indicator (3) shows the active mode. See ‘Scenes’, p. 12.• The microphone indicator (4) shows that the microphone is muted.• The file format indicator (5) indicates the format of the video clip.The zoom indicator, which appears on the side pane, shows the zoom level. Scroll up or down to zoom in or zoom outAfter a video clip is recorded:• To immediately play the video clip you just recorded, select Options > Play.Graphic: Screenshot to indicate the setup (lower) part of the screen being active.R1114_en.book  Page 24  Friday, September 16, 2005  9:36 AM
Camera25• If you do not want to keep the video, select Options > Delete.• To return to the viewfinder to record a new video, press the scroll key.• To send the video Via multimedia,Via e-mail, or ViaBluetooth, select Options > Send. For more information, see ‘Messaging’, p. 38 and ‘Bluetooth connectivity’, p. 76. This option is not available during an active call.• To send a video clip to the other party during an active call, select Options > Send to caller.• To edit the video, select Options > Edit. See also ‘Edit video clips’ on p.18.Video settingsThere are two kinds of settings for the video recorder: video setup settings and main settings. To adjust video setup settings, see ‘Setup settings—Adjust colour and lighting’, p. 12. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Audio recording—Select On if you want to record both image and sound.Video quality—Set the quality of the video clip to High,Normal, or Sharing. The quality is indicated with one of the following icons:   (High),   (Normal), or   (Sharing). If you select High or Normal, the length of the video recording is restricted by the available space on your memory card, and up to 1 hour per clip. If you want to view the video on a TV or PC, select High video quality, which has CIF resolution (352x288) and file format .mp4. You cannot send video clips saved in the .mp4 format in a multimedia message. If you want to view the clip in mobile phones, select Normal, which has QCIF resolution (176x144) and file format .3gp. To send the video clip through MMS, or send it through video sharing, select Sharing (QCIF resolution, file format .3gp). See ‘Video sharing (network service)’, p. 54. The video clip is limited to 300 kB (approximately 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 kB. Contact your service provider for more information.Add to album—Select Yes to save the recorded video clip to a particular album in Gallery.Show captured video—Select Off to record a video clip immediately after another. Your videos are not played after being recorded, and the video recorder is ready for use again.R1114_en.book  Page 25  Friday, September 16, 2005  9:36 AM
Camera26Default video name—Select Date or Text as the default name for videos you record.Capture tone—Select Click or Beep as the default name for videos you record.Memory in use—Choose the default memory store: phone memory or memory card.Edit video clipsYou can edit video clips in Gallery. See ‘Gallery’, p.9.To edit video clips and create custom video clips, scroll to a video clip, and select Options > Edit. You can create custom video clips by combining and trimming video clips, and adding images, sound clips, transitions, and effects. Transitions are visual effects that you can add to the beginning and end of the video or between the video clips.In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, press   or  . To switch between the timelines, press   or  .Edit video, sound, image, text, and transitionsTo create custom video clips, mark and select one or more video clips, and select Options > Edit.In the Edit video view, you can insert video clips to make a custom video clip, and edit the clips by trimming and adding effects. You can add images and sound clips and change their duration, and also add text and images to the clip.To modify the video, select from the following options:Edit video clip:Cut—Trims the video clip in the Cut video clip view.Add colour effect—Inserts a colour effect in the video clip.Use slow motion—Slows the speed of the video clip.Mute audio/Unmute audio—Mutes or unmutes the original video clip sound.Move—Moves the video clip to the selected location on the timeline.Remove—Removes the video clip from the video.Duplicate—Makes a copy of the selected video clip.Edit text (shown only if you have added text)—To move, remove or duplicate text; change the colour and style of R1114_en.book  Page 26  Friday, September 16, 2005  9:36 AM
Camera27the text; define how long it stays on the screen; and add effects to the text.Edit image (shown only if you have added an image)—To move, remove or duplicate an image; define how long it stays on the screen; and set a background or a colour effect to the image.Edit audio clip:Cut—Trims the sound clip in the Cut sound clip view.Move—Moves the sound clip to the selected location on the timeline.Remove—Removes the sound clip from the video.Duplicate—Makes a copy of the selected sound clip.Change duration—Changes the length of the sound clip.Edit transition—There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active.Insert:Video clip—Inserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black frame of the video clip. The name and length of the selected video clip is also shown.Image—Inserts the selected image. A thumbnail of the image is shown in the main view.Text—Inserts text to the video clip. You can insert a title, subtitle, or credits.Audio clip—Inserts the selected sound clip. The name and length of the selected sound clip is shown in the main view.New audio clip—Records a new sound clip to the selected location.Movie—To preview the movie in full screen or as a thumbnail, save or send the movie, or cut the movie to a suitable size for sending it in a multimedia message. Tip! To take a snapshot of a video clip, select Options >Take snapshot in the thumbnail Preview view or in the Cut video view.To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the phone memory.  Tip! In the Settings view, you can define Default video name,Default snapshot name,Save quality,and Memory in use.R1114_en.book  Page 27  Friday, September 16, 2005  9:36 AM
Camera28Select Send > Via multimedia,Via e-mail, or ViaBluetooth if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, the symbol   appears. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth. See ‘Send data using Bluetooth connectivity’, p. 78. You can also transfer your videos using Bluetooth into your Bluetooth-enabled personal computer, or by using a memory card reader (enhancement).R1114_en.book  Page 28  Friday, September 16, 2005  9:36 AM
Gallery29GalleryTo store and organise your images, video clips, sound clips, playlists, and streaming links, press  , and select Gallery.>Images&Video. To open the gallery from the Cameraapplication, select Options > Go to Gallery. In Camera,only the Images & video folder is available. Tip! To switch from Gallery to the camera, select Camera from the Images & video folder..Select Images&Video , Tracks , Sound clips,Links , Presentations , or All files  , and press   to open it..You can browse and open folders, mark, copy, and move items to folders and albums. Sound clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer™’, p. 34. You can also create albums; and mark, copy, and add items to albums. See ‘Albums’, p. 11.Tip! You can transfer images from your device to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your phone.Press   to open a file. Videos, music, and sound clips open in RealPlayer. See ‘View images and video clips’, p. 10.To copy or move files to the memory card or to phone memory, select a file and Options > Organise >Copy to memory card/Move to memory card or Copy to phone mem./Move to phone mem..Files stored on the memory card are indicated with  .To reduce the size of files that you have already copied to other locations (such as a PC) and so increase free memory space, in the Images&vidos folder select a file and Options > Free memory.To download files into Gallery in one of the main folders using the browser, select Graphic downls. or Video downlds.,Track downlds., or Sound downlds.. The browser opens, and you can select a bookmark from which the site can download.R1114_en.book  Page 29  Friday, September 16, 2005  9:36 AM
Gallery30View images and video clipsPictures taken and video clips recorded with the camera are stored in the Images&Video folder in Gallery. The quality of a video clip is indicated with one of the following icons:   (High),   (Normal), and   (Low) and  (Sharing). Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or through a Bluetooth connection. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the phone memory or on a memory card.Open the Images&Video folder in Gallery. The images and video clip files are in a loop, and ordered by date. To browse individual files, press   or  . To browse files in groups, press   or  .To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens.To add an image or a video clip to an album in the gallery, select Options > Albums. > Add to album. See ‘Albums’, p. 11.To create custom video clips, select a video clip, or several clips, in the gallery, and select Options > Edit.. See ‘Edit video clips’, p. 26.To print your images on a printer connected to your phone, or to store them on your MMC for printing, select Options >Print. See ‘Image print’, p. 33.To zoom an image, select Options > Zoom in or Zoom out.The zooming ratio is at the top of the display. The zooming ratio is not stored permanently.Slide showUse Slide show to view images and video clips in the full screen mode. Select from the following:•Start—to start the slide show.•Play—to open the RealPlayer application.•Pause—to pause the slide show•Continue—to resume the slide show•End—to close the slide show.Press   (faster) or   (slower) to adjust the Tempo.Press   (previous) or   (next) to browse the thumbnails.To add sound to the slide show, in the Images&Videofolder, select Options > Slide show > Music settings and from the following:•Music—Select On, or Off.•Track—Select a music file from the list.•Volume—Press   to decrease the volume, or   to increase the volume.R1114_en.book  Page 30  Friday, September 16, 2005  9:36 AM
Gallery31PresentationsWith presentations, you can view SVG (scaleable vector geometry) files. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentationsfolder, scroll to an image, and select Options > Play.AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images&Video folder, select Options > Albums > Viewalbums. The albums are ordered alphabetically. To view the content of an album, press the scroll key.To create a new album, select Options > New album. Enter a name for the album, and select OK.To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options > Albums. > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press the scroll key.To remove a file from an album, press  . The file is not deleted from the Images&Video folder in Gallery.R1114_en.book  Page 31  Friday, September 16, 2005  9:36 AM
Media applications32Media applicationsMusic playerPress , and select Music plyr.. With the music player, you can play music files and create and listen to playlists.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.After you add or remove music files in the device, update your music library. Select Options >Music library >Options >Update Music library.Tip! You can transfer music files from your device to your memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.Play musicWhen you open the music player, the previously played track or playlist is displayed. To view the music library, select qgn_indi_mup_button_mc_inact or Options >Music library and the desired song list. To start playing the songs in the view, select Options >Play.When a song is playing, to change between play and pause, press qgn_indi_mup_button_play_hl/qgn_indi_mup_button_pause_hl.To stop a song, press qgn_indi_mup_button_stop_inact. To fast forward or rewind, press and hold qgn_indi_mup_button_prev_inact or qgn_indi_mup_button_next_inact. To start playing the next or previous song, press qgn_indi_mup_button_prev_inact or qgn_indi_mup_button_next_inact.To view the currently played song list, select qgn_indi_mup_button_playlist_inact or Options >Open ‘Now playing’. To save the song list as a playlist, select R1114_en.book  Page 32  Friday, September 16, 2005  9:36 AM
Media applications33Options >Add to track list, and create a new playlist, or select a saved playlist.To adjust the volume, press   or  .To select between random play and normal play mode, select Options >Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options >Loop.???Icons in Music plyr.: —Repeat;  —Random; — Repeat and random; and  —Loudspeaker muted.??? Tip! To leave the application open and music playing in the background, press   twice to return to the standby mode. To return to the application, press  , and select Music plyr..To open your Web bookmarks for downloading music, select Options >Track downloads.To return to the standby mode and leave the music playing in the background, select Options >Play in background.Music libraryTo view the music library, select Options >Music library.All tracks lists all music. To view sorted songs, select Albums,Artists,Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.To add songs, albums, artists, genres or composers to a playlist, select the items and Options >Add to track list.You can create a new playlist or add to an existing one.To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options >Add tracks.To delete a playlist, press  . Deleting a playlist only deletes the playlist, not the music files.Image printTo print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer.Use Image print to print your images using a data cable, Bluetooth connectivity, or your memory card (if available).You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpeg format.Note: To print to a PictBridge-compliant printer, connect the data cable before you select the print option.R1114_en.book  Page 33  Friday, September 16, 2005  9:36 AM
Media applications34Printer selectionWhen you use Image print for the first time, a list of available printers is displayed after you select the image. Select a printer. The printer is set as the default printer.If you have connected a PictBridge-compliant printer using the CA-53 cable, the printer is automatically displayed.If the default printer is not available, a list of available printing devices is displayed.To change the default printer, select Options >Settings >Default printer.Print previewThe print preview view opens only when you start printing an image in the gallery.The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.Print settingsThe available options vary, depending on the capabilities of the printing device you selected.To set a default printer, select Options >Default printer.To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.RealPlayer™Press , and select Imaging > RealPlayer. With RealPlayer, you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or memory card (if inserted).RealPlayer supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device. Play video or sound clips1To play a media file stored in device memory, or on the memory card (if inserted), select Options >Open and from the following:R1114_en.book  Page 34  Friday, September 16, 2005  9:36 AM
Media applications35Most recent clips—to play one of the last six files played in RealPlayerSaved clip—to play a file saved in Gallery.See ‘Gallery’, p. 29.2Scroll to a file, and press   to play the file. Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode.Shortcuts during play:• To fast forward,  press and hold  .• To rewind through the media file, press and hold  .• To mute the sound, press and hold   until   is displayed. To turn on the sound,  press and hold   until you see  .Stream content over the airMany service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.The access points may be configured when you first start your device.Contact your service provider for more information. Note: In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer recognizes an http link to a .ram file.To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in  your device.Receive RealPlayer settingsYou may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 43. For more information, contact your network operator or service provider.Change the RealPlayer settingsSelect Options >Settings and from the following:Video—to adjust the contrast of the video, and to have RealPlayer automatically repeat video clips after they finish playing.Connection—to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.Proxy settings:Use proxy—To use a proxy server, select Yes.R1114_en.book  Page 35  Friday, September 16, 2005  9:36 AM
Media applications36Proxy serv. address—Enter the IP address of the proxy server.Proxy port number—Enter the port number of the proxy server.Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Network settings:Default access point—Scroll to the access point you want to use to connect to the Internet, and press  .Online time—Set the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press  . Enter the time, and select OK.Lowest UDP port—Enter the lowest port number of the server’s port range. The minimum value is 1024.Highest UDP port—Enter the highest port number of the server’s port range. The maximum value is 65535.Select Options >Advanced settings to edit the bandwidth values for different networks.Movie DirectorTo create muvees, press  , and select Imaging >Movie.muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muveeyou can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.Open Movie, and press   or   to move between the  and   views. You can also return to the main view from the   view by selecting Done.The   view contains a list of video clips that you can Play,Send,Rename, and Delete.Create a quick muvee1In the Movie director main view, select Quick muvee.2Select a style for the muvee from the style list. The created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving.R1114_en.book  Page 36  Friday, September 16, 2005  9:36 AM
Media applications37Create a custom muvee1In the Movie Director main view, select Custom muvee.2Select the clips you want to include in your muvee in Video,Image,Style, or Music.After you select video clips and images, to define the order in which the files are played in the muvee, select Options >Advanced options. To select the file you want to move, press  . Then scroll to the file below which you want to place the marked file, and press .To cut the video clips, select Options >Select contents. See ‘Select content’, p. 14.In Message you can add an opening and closing text to a muvee.3Select Create muvee and from the following:Multimedia message—to optimize the length of the muvee for MMS sendingAuto-select—to include all the selected pictures and video clips in the muveeSame as music—to set the muvee duration to be the same as the chosen music clipUser defined—to define the length of the muvee4Select Options >Save.To preview the custom muvee before saving it, in the Preview muvee view, select Options >Play.To create a new custom muvee by using the same style settings, select Options >Recreate.Select contentTo edit the selected video clips, select Options >Advanced options >Options >Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts.To include a part of the video clip in the muvee, scroll to the part, and select Options >Include. To exclude a part, select Options >Exclude. To exclude a shot, select Options >Exclude shot.To let Movie director randomly include or exclude a part or parts of the video clip, scroll to the part, and select Options >Mark as neutral or Mark all as neutral.SettingsSelect Settings to edit the following options:Memory in use—Select where to store your muvees.Resolution—Select the resolution of your muvees.Default muvee name—Set a default name for the muvees.R1114_en.book  Page 37  Friday, September 16, 2005  9:36 AM
Messaging38MessagingPress , and select Messaging. In Messaging, you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Web service messages, cell broadcast messages, and send service commands.To create a new message, select New message.Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.Messaging contains the following folders:Inbox—Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox.My folders—Organize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder.Mailbox—Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 19.Drafts—Draft messages that have not been sent are stored here.Sent—The last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see ‘Other settings’, p. 21.Outbox—Messages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.Reports—You can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Tip! When you have opened any of the default folders, to switch between the folders, press   or  .To enter and send service requests (also known as USSD commands), such as activation commands for network R1114_en.book  Page 38  Friday, September 16, 2005  9:36 AM
Messaging39services, to your service provider, select Options >Service command in the main view of Messaging.Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options >Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.Write textABC,abc, and Abc indicate the selected character mode. 123 indicates the number mode.Traditional text input is displayed when you are writing text using traditional text input.• Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.• If the next letter is located on the same key as the present one, wait until the cursor appears (or press   to end the time-out period), and enter the letter.• To insert a space, press  . To move the cursor to the next line, press   three times.Predictive text inputYou can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words.   is displayed when you write text using predictive text input.1To activate predictive text input, press  , and select Predictive text on. This activates predictive text input for all editors in the device.2To write the desired word, press the keys  — . Press each key only once for one letter. For example, to write "Nokia" when the English dictionary is selected, press   for N,   for o,  for k,   for i, and  for a.The word suggestion changes after each keypress.3When you finish writing the word correctly, press   to confirm it, or press   to add a space.R1114_en.book  Page 39  Friday, September 16, 2005  9:36 AM
Messaging40If the word is not correct, press   repeatedly to view the matching words the dictionary has found one by one, or press  , and select Predictive text >Matches.If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.4Start writing the next word.Write compound wordsWrite the first half of a compound word; to confirm it, press  . Write the last part of the compound word. To complete the compound word, press   to add a space.Turn predictive text input offTo turn predictive text input off for all editors in the device, press  , and select Predictive text >Off. Tip! To turn predictive text input on or off, quickly press  twice.Tips on text inputTo insert a number in the letter mode, press and hold the desired number key.To switch between the letter and number mode, press and hold .To switch between the different character modes, press .To delete a character, press  . To delete more than one character, press and hold  .The most common punctuation marks are available under .To open a list of special characters, press and hold  . Tip! To insert several special characters at the same time, press   when you select each character.Write and send messagesThe appearance of a multimedia message may vary, depending on the receiving device.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘Receive MMS and e-mail settings’, p. 13 and ‘E-mail’, p. 19.R1114_en.book  Page 40  Friday, September 16, 2005  9:36 AM
Messaging41The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1Select New message and one of the following:Text message—to send a text messageMultimedia message—to send a multimedia message (MMS)E-mail—to send an e-mailIf you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.2In the To field, press   to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press  . You can also copy and paste the number or address from the clipboard.3In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options >Address fields.4In the message field, write the message. To insert a template, select Options >Insert or Insert object >Template.5To add a media object to a multimedia message, select Options >Insert object >Image,Sound clip, or Video clip. When sound is added,   is shown.You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see ‘Video settings’, p. 25.6To take a new picture or record sound or video for a multimedia message, select Insert new >Image,Sound clip, or Video clip. To insert a new slide to the message, select Slide.To see what the multimedia message looks like, select Options >Preview.7To add an attachment to an e-mail, select Options >Insert >Image,Sound clip,Video clip, or Note. E-mail attachments are indicated by  . Tip! To send other file types as attachments, open the appropriate application, and select Send >Viae-mail, if available.8To send the message, select Options >Send, or press .Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service R1114_en.book  Page 41  Friday, September 16, 2005  9:36 AM
Messaging42provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.E-mail messages are automatically placed in Outboxbefore sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options >Create presentation. The option is shown only if MMS creation mode is set to Guided or Free.See ‘Multimedia messages’, p. 18.Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See ‘Data and settings’, p. 14.For availability of and subscription to data services, contact your network operator or service provider. Follow the instructions given by your service provider.Enter the MMS settings manually1Press  , and select Tools >Settings >Connection >Access points, and define the settings for a multimedia messaging access point. See ‘Connection settings’, p. 90.2Press , and select Messaging >Options >Settings >Multimedia message >Access point in use and the access point you created as the preferred connection. See also ‘Multimedia messages’, p. 18.Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:• Configure an Internet access point (IAP) correctly. See ‘Connection settings’, p. 90.• Define your e-mail settings correctly. If you select Mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 19.You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).Inbox—receive messagesIn the Inbox folder,   indicates an unread text message,   an unread multimedia message,   data R1114_en.book  Page 42  Friday, September 16, 2005  9:36 AM
Messaging43received through infrared, and   data received through Bluetooth connectivity.When you receive a message,   and 1 new messageare shown in the standby mode. to open the message, select Show. To open a message in Inbox, scroll to it, and press .To reply to a received message, select Options >ReplyTo print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options >Print.Multimedia messagesImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options >Retrieve.When you open a multimedia message ( ), you may see an image and a message.   is shown if sound is included, or   if video is included. To play the sound or the video, select the indicator.To see the media objects that have been included in the multimedia message, select Options >Objects.If the message includes a multimedia presentation,   is displayed. To play the presentation, select the indicator.Data and settingsYour device can receive many kinds of messages that contain data ( ):Configuration message—You may receive settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options >Save all.Business card—To save the information to Contacts, select Options >Save business card. Certificates or sound files attached to the business card are not saved.Ringing tone—To save the ringing tone, select Options >Save.Operator logo—To have the logo shown in the standby mode instead of the network operator’s own identification, select Options >Save.Calendar entry—To save the invitation, select Options >Save to Calendar.Web message—To save the bookmark to the bookmarks list in Web, select Options >Add to bookmarks. If the R1114_en.book  Page 43  Friday, September 16, 2005  9:36 AM
Messaging44message contains both access point settings and bookmarks, to save the data, select Options >Save all.E-mail notification—The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.Web service messagesWeb service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.MailboxIf you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 19.When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also ‘Connection settings’, p. 90.To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox.Retrieve e-mail messagesIf you are offline, select Options >Connect to start a connection to the remote mailbox.Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.1When you have an open connection to a remote mailbox, select Options >Retrieve e-mail and one of the following:New—to retrieve all new e-mail messagesSelected—to retrieve only the e-mail messages that have been markedAll—to retrieve all messages from the mailboxR1114_en.book  Page 44  Friday, September 16, 2005  9:36 AM
Messaging45To stop retrieving messages, select Cancel.2After you retrieve the e-mail messages, you can continue viewing them online, or select Options >Disconnect to close the connection and view the e-mail messages offline.E-mail status indicators: The new e-mail (offline or online mode) has not been retrieved to your device. The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the message content has been deleted from the device.3To open an e-mail message, press  . If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.To view e-mail attachments, open a message that has the attachment indicator  , and select Options >Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options >Retrieve.You can also receive meeting requests in the mailbox. See ‘Meeting requests’, p. 68, and ‘Create calendar entries’, p. 68.To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options >Print.Retrieve e-mail messages automaticallyTo retrieve messages automatically, select Options >E-mail settings >Automatic retrieval >Header retrieval >Always on or Only in home net., and define when and how often the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.Delete e-mail messagesTo delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options >Delete. In Delete msg. from:, select Phone only.The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status.R1114_en.book  Page 45  Friday, September 16, 2005  9:36 AM
Messaging46To delete an e-mail from the device and the remote mailbox, select Options >Delete. In Delete msg. from:,select Phone and server.If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options >Undelete.Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options >Disconnect.View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1In the Messaging main view, select Options >SIM messages.2Select Options >Mark/Unmark >Mark or Mark all to mark messages.3Select Options >Copy. A list of folders opens.4To start copying, select a folder and OK. To view the messages, open the folder.Messaging settingsFill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Text messagesPress , and select Messaging >Options >Settings >Text message and from the following:Message centers—View a list of all text message centers that have been defined.Character encoding— To use character conversion to another encoding system when available, select Reduced support.Msg. center in use—Select which message center is used to deliver text messages.R1114_en.book  Page 46  Friday, September 16, 2005  9:36 AM
Messaging47Receive report—Select whether the network sends delivery reports on your messages (network service).Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.Message sent as—Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.Preferred connection—Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See ‘Connection settings’, p. 90.Reply via same ctr.—Select whether you want the reply message to be sent using the same text message center number (network service).Multimedia messagesPress  , and select Messaging >Options >Settings >Multimedia message and from the following:Image size—Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.MMS creation mode —If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.Access point in use—Select which access point is used as the preferred connection for the multimedia message center.Multimedia retrieval—Select how you want to receive multimedia messages. To receive multimedia messages automatically in your home network, select Aut. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center.When you are outside your home network, sending and receiving multimedia messages may cost you more.If you select Multimedia retrieval >Always automatic,your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.Allow anon. messages—Select whether you want to reject messages from an anonymous sender.Receive ads—Define whether you want to receive multimedia message advertisements.R1114_en.book  Page 47  Friday, September 16, 2005  9:36 AM
Messaging48Receive report—Select whether you want the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.Deny report sending—Select whether you want to deny your device sending delivery reports of received multimedia messages.Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.E-mailPress , and select Messaging >Options >Settings >E-mail and from the following:Mailboxes—Select a mailbox to change the following settings: Connection settings,User settings,Retrieval settings, and Automatic retrieval.Mailbox in use— Select which mailbox you want to use for sending e-mail.To create a new mailbox, select Options >New mailbox in the mailbox main view.Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:User name—Enter your user name, given to you by your service provider.Password—Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.Incoming mail server—Enter the IP address or host name of the mail server that receives your e-mail.Access point in use—Select an Internet access point (IAP). See ‘Connection settings’, p. 90.Mailbox name—Enter a name for the mailbox.Mailbox type—Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.Security (ports)—Select the security option used to secure the connection to the remote mailbox.Port—Define a port for the connection.R1114_en.book  Page 48  Friday, September 16, 2005  9:36 AM
Messaging49APOP secure login (for POP3 only)—Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:My e-mail address—Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.Outgoing mail server—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.Access point in use—Select an Internet access point (IAP). See ‘Connection settings’, p. 90.The settings for User name,Password,Security (ports),and Port are similar to the ones in Incoming e-mail.User settingsMy name—Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.Send message—Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.Send copy to self—Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.Include signature—Select whether you want to attach a signature to your e-mail messages.New e-mail alerts—Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.Default encoding—Select another encoding according to language.Retrieval settingsE-mail to retrieve—Define which parts of the e-mail are retrieved: Headers only,Partially (kB),Messages (for IMAP4 only), or Msgs. & attachs..Retrieval amount—Define how many new e-mail messages are retrieved to the mailbox.IMAP4 folder path (for IMAP4 only)—Define the folder path for folders to be subscribed.Folder subscriptions (for IMAP4 only)—Subscribe to other folders in the remote mailbox and retrieve content from those folders.R1114_en.book  Page 49  Friday, September 16, 2005  9:36 AM
Messaging50Automatic retrievalE-mail notifications—Select whether you want to receive notifications when new e-mail is received in your remote mailbox.E-mail notifications and automatic header retrieval cannot be active at the same time.Header retrieval—Select whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.Web service messagesPress , and select Messaging >Options >Settings >Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages >Automatically.Cell broadcastCheck the available topics and related topic numbers with your service provider. Press  , and select Messaging >Options >Settings >Cell broadcast and from the following:Reception—Select whether you want to receive cell broadcast messages.Language—Select the languages in which you want to receive messages: All,Selected, or Other.Topic detection—Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.Other settingsPress , and select Messaging >Options >Settings >Other and from the following:Save sent messages—Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder.No. of saved msgs.—Define how many sent messages are saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.Memory in use—If a memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card.R1114_en.book  Page 50  Friday, September 16, 2005  9:36 AM
Make calls51Make callsVoice calls Tip! To increase or decrease the volume during a call, press   or  . If you have set the volume to Mute,you cannot adjust the volume with the    or   keys.  To adjust the volume, select Unmute, and then press   or .1In the standby mode, enter the phone number, including the area code. To remove a number, press  . For international calls, press   twice for the +character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.2Press   to call the number.3Press   to end the call (or to cancel the call attempt).Pressing   always ends a call, even if another application is active. To end a call if the cover is open, close the cover. To make a call from Contacts, press  , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts are listed. To call, press  . Select the call type Voice call.You must copy the contacts from your SIM to Contactsbefore you can make a call this way. See ‘Copy contacts’, p. 62.To call your voice mailbox (network service), press and hold   in the standby mode. See also ‘Call diverting’, p. 96. Tip! To change the phone number of your voice mailbox, press  , and select Tools > Voice mail >Options > Change number. Enter the number (obtained from your service provider), and select OK.To call a recently dialled number in the standby mode, press  . Scroll to the number you want, and press   to call the number.Make a conference call1Make a call to the first participant.2To make a call to another participant, select Options > New call. The first call is automatically put on hold.3When the new call is answered, to join the first participant in the conference call, select Options > Conference.To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference.R1114_en.book  Page 51  Friday, September 16, 2005  9:36 AM
Make calls52Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private.Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop.4To end the active conference call, press  .Speed dial a phone numberTo activate speed dialing, press  , and select Tools > Settings > Call > Speed dialing > On.To assign a phone number to one of the speed dialing keys ( — ), press  , and select Tools > Speed dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign.   is reserved for the voice mailbox. To call in the standby mode, press the speed dial key and .Voice dialingYour device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.1To start voice dialing, press and hold the voice key. If you are using a compatible headset with the headset key, press and hold the headset key to start voice dialing.R1114_en.book  Page 52  Friday, September 16, 2005  9:36 AM
Make calls532A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.3The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 1.5 seconds, the device dials the number.If the recognized contact was not correct, select Nextto view a list of other matches, or Quit to cancel voice dialing.If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile,Mobile (home),Mobile (business),Telephone,Tel. (home), and Tel. (business).Video callsWhen you make a video call, you can see a real-time, two-way video between you and the recipient of the call. The live video image, or video image captured by the camera in your device is shown to the video call recipient. To be able to make a video call, you must have a USIM card and be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. A video call can only be made between two parties. The video call can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active.Icons:  You are not receiving video (the recipient is not sending video or the network is not transmitting it).  You have denied video sending from your device. To send a still image instead, see ‘Call settings’, p. 89.1To start a video call, open the cover, enter the phone number in the standby mode, or select Contacts,and select a contact.2Select Options > Call > Video call.3Activate the Imaging mode after the call recipient has answered the call. Starting a video call may take a while. Waiting for imageis shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead.The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you R1114_en.book  Page 53  Friday, September 16, 2005  9:36 AM
Make calls54hear the sound and may see a still image or a grey background graphic. Tip! To increase or decrease the volume during a call, scroll left or right.To change between showing video or hearing only sound, select Enable/Disable > Sending video,Sending audio or Sending audio & video.To send live video image of yourself, select Use front camera to switch on the front camera.  To show the other party the view visible from the back camera, select Use back camera. Tip! Open or close the cover to switch between  the front and back cameras. IS THIS TRUE?To zoom your own image, select Zoom in or Zoom out.The zoom indicator is shown on the top of the display.To switch the places of the sent video images on the display, select Change image order. Note: Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider.To end the video call, press  .Video sharing (network service)Use Video sharing to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. Simply invite a recipient to view the live video, or a video clip you want to share. Sharing begins automatically when the recipient accepts the invitation, and you activate the correct mode. See ‘Share video’, p. 13.Video sharing requirementsBecause Video sharing requires a 3G Universal Mobile Telecommunications System (UMTS) connection, your ability to use Video sharing depends on 3G network availability. Contact your service provider for questions about network availability and fees associated with using this application. To use Video sharing you must:• Ensure that Video sharing is installed on your Nokia NXX.• Ensure that your device is set up for person-to-person connections. See ‘Settings’, p.13.• Ensure you have an active UMTS connection and are within UMTS network coverage. See ‘Settings’, p. 13. If you start the sharing session while you are within UMTS network coverage and a handover to GSM occurs, the sharing session is discontinued, but your voice call continues. R1114_en.book  Page 54  Friday, September 16, 2005  9:36 AM
Make calls55• Ensure that both the sender and recipient are registered to the UTMS network. If you invite someone to a sharing session and that person has his phone turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation.SettingsPerson-to-person connection settingsA person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible phone. The SIP profile must also be established to receive a sharing session.Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air.If you know a recipient’s SIP address, you can enter it on your contact card for that person. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options >Add detail > Web address. Enter the SIP address in a format sip:username@domainname (you can use an IP address instead of a domain name). UTMS connection settingsTo set up your UMTS connection, do the following:• Contact your service provider to establish an agreement for you to use the UMTS network.• Ensure that your device UMTS access point connection settings are configured properly. For help, see ‘Connection settings’, p. 90.Share videoTo receive a sharing session, the recipient must install Video sharing and configure the required settings on their mobile device. You and the recipient must both be registered to the service before you can start sharing.To receive share invitations, you must be registered to the service, have an active UMTS connection, and be within the UMTS network coverage.Live video1When a voice call is active, select Options > Share video > Live.2The phone sends the invitation to the SIP address you have added to the contact card of the recipient. R1114_en.book  Page 55  Friday, September 16, 2005  9:36 AM
Make calls56If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. 3Sharing begins automatically when the recipient accepts the invitation.The loudspeaker is active. You can also use a headset to continue your voice call while you share live video.4Select Pause to pause the sharing session. Select Continue to resume sharing.5To end the sharing session, select Stop. To end the voice call, press the End key.Video clip1When a voice call is active, select Options > Share video > Clip.A list of video clips opens.2Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play.3Select Options > Invite.You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK.The phone sends the invitation to the SIP address you have added to the contact card of the recipient. In case the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation.4Sharing begins automatically when the recipient accepts the invitation HOW DOES THIS WORK NOW? .5Select Pause to pause the sharing session. Select Options > Continue to resume sharing.6To end the sharing session, select Stop. To end the voice call, press the End key.Accept an invitationWhen someone sends you a share invitation, an invitation message is displayed showing the sender’s name or SIP address. If your device is not set to Silent, it rings when you receive an invitation.If someone sends you a share invitation and you are not within UMTS network coverage,  you will not know that you received an invitation.When you receive an invitation, you can select:•Accept to begin the sharing session. If the sender wants to share live video, activate the Imaging mode.•Reject to decline the invitation. The sender receives a message that you rejected the invitation. You can also press the End key to decline the sharing session and disconnect the voice call.R1114_en.book  Page 56  Friday, September 16, 2005  9:36 AM
Make calls57To end the sharing session, select Stop. If you share a video clip, select Exit.Sharing ended is displayed.Answer or reject a callTo answer the call if the cover is open, press  . If the cover is closed, open the cover, and the call will be answered automatically. To mute the ringing tone when a call comes in, select Silence. If the cover is closed, press the cover key to select  Silence. Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key.If the cover is open, and you do not want to answer a call, press   or close the cover to reject it. If the cover is closed, press the cover key once to silence the ringing, and again to reject the call.  The caller hears a line busy tone. If you have activated the Call divert settings > If busyfunction to divert calls, rejecting an incoming call also diverts the call. See ‘Call diverting’, p. 96.When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 89.If you answer a voice call during a video call, the video call is dropped. Call waiting is not available during a video call.Answer or reject a video callWhen a video call arrives, you can see  .1Press   to answer the video call. Allow video image to be sent to caller? is shown.If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select No, or do nothing, video sending is not activated, and you hear a sound. A grey screen is shown in place of the video. To replace this grey screen with a still image, see ‘Call settings’, Image in video call, p. 89.2To end the video call, press  .Note: Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider.Call waiting (network service)You can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Call > Call waiting.R1114_en.book  Page 57  Friday, September 16, 2005  9:36 AM
Make calls58 Tip! To change the device tones for different environments and events, for example, when you want your device to be silent, see ‘Profiles—set tones’, p. 85.To answer the waiting call, press  . The first call is put on hold.To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer . To end the active call, press  . To end both calls, select Options > End all calls.Options during a voice callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute,Answer,Reject,Swap,Hold or Unhold,Activate handset,Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls,New call,Conference, and Transfer. Select from the following: Replace—To end an active call and replace it by answering the waiting call.Send MMS (in UMTS networks only)—To send an image or a video in a multimedia message to the other participant of the call. You can edit the message and change the recipient before sending. Press   to send the file to a compatible device (network service).Send DTMF—To send DTMF tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press   repeatedly. Select OK to send the tone. Tip! You can add DTMF tones to the Phone numberor DTMF fields in a contact card.  Tip! If you select Activate loudsp., you can close the cover and continue the call.  Tip! To switch the microphone of or on when the cover is closed, press the cover key to select to Mute or Unmute.Options during a video callSelect Options during a video call for the following options: Enable or Disable WHAT ARE THE AUDIO’VIDEO  ’OPTIONS’? GROMIT SAYS :(audio in the Fold open mode; video, audio, or both in the Imaging mode), Activate handset (if a headset with Bluetooth connectivity is attached), Activate loudsp., or Activate handsfree HOW DOES THIS WORK NOW? (Fold open mode only, and if a headset with Bluetooth connectivity is attached), End active call,Change image order,Zoom in/Zoom out(Imaging mode only), and Help.R1114_en.book  Page 58  Friday, September 16, 2005  9:36 AM
Make calls59LogRecent calls To monitor the phone numbers of missed, received, and dialled calls, press  , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press  .Call duration To monitor the approximate duration of your incoming and outgoing calls, press  , and select My own > Log > Call duration.To set the display of the call duration while a call is active, select Connect. > Log > Options > Settings > Show call duration. Select Yes or No.Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To clear call duration timers, select Options > Clear timers. For this you need the lock code, see ‘Security’, ‘Phone and SIM’, p. 93.Packet dataTo check the amount of data sent and received during packet data connections, press  , and select My own >Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.Monitor all communication eventsIcons in Log: Incoming Outgoing  Missed communication eventsR1114_en.book  Page 59  Friday, September 16, 2005  9:36 AM
Make calls60To monitor all voice and video calls, text messages, or data connections registered by the device, press  , select Myown > Log, and press the scroll key to the right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information.  Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings>Show call duration > Yes. Tip! To view a list of sent messages, press  , and select Messaging > Sent.Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or Web pages are shown as packet data connections.To filter the log, select Options > Filter and a filter.To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options>Clear log. Select Yes to confirm. To remove a single event from the log, press  .To set the Log duration, select Options > Settings > Logduration. The log events remain in the phone memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.To view the details of a communication event, in the general log view scroll to an event, and press the scroll key. Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy Number.Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.R1114_en.book  Page 60  Friday, September 16, 2005  9:36 AM
Contacts (Phonebook)61Contacts (Phonebook)Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 43. Contact information can only be sent to or received from compatible devices. Save names and numbers1Select Options >New contact.2Fill in the fields that you want, and select Done.To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options >Edit. Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.To delete a contact card in Contacts, select a card, and press  . To delete several contact cards at the same time, press   and   to mark the contacts, and press   to delete. Tip! To add and edit contact cards, use Nokia Contacts Editor available in Nokia PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options >Edit >Options >Add thumbnail. The thumbnail image is shown when the contact calls. Tip! 1-touch dialing is a quick way to call frequently used numbers. You can assign 1-touch dialing keys to eight phone numbers. See ‘Speed dial a phone number’, p. 52. Tip! To send contact information, select the card you want to send. Select Options >Send >Via text message,Via multimedia,Via Bluetooth, or Viainfrared. See ‘Messaging’, p. 38 and ‘Send data using Bluetooth connectivity’, p. 78.To add a contact to a group, select Options >Add to group (shown only if you have created a group). See ‘Create contact groups’, p. 11.To view the amount of contacts, groups, and the available memory in Contacts, select Options >Memory details.R1114_en.book  Page 61  Friday, September 16, 2005  9:36 AM
Contacts (Phonebook)62Default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1In the address book, select a contact, and press  .2Select Options >Defaults.3Select a default to which you want to add a number or an address, and select Assign.4Select a number or an address you want to set as a default.The default number or address is underlined in the contact card.Copy contactsTo copy names and numbers from a SIM card to your device, press  , and select Contacts >Options >SIM contacts >SIM directory. Select the names you want to copy and Options >Copy to Contacts.To copy contacts to your SIM card, press  , and select Contacts. Select the names you want to copy and Options >Copy to SIM direct., or Options >Copy >To SIM directory. Only the contact card fields supported by your SIM card are copied. Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite. SIM directory and other SIM servicesFor availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Press  , and select Contacts >Options >SIM contacts >SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.To view the list of fixed dialing numbers, select Options >SIM contacts >Fixed dialing contacts. This setting is only shown if supported by your SIM card.To restrict calls from your device to selected phone numbers, select Options >Activ. fixed dialing. To add new numbers to the fixed dialing list, select Options >New SIM contact. You need the PIN2 code for these functions.When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.R1114_en.book  Page 62  Friday, September 16, 2005  9:36 AM
Contacts (Phonebook)63When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.Add ringing tones for contactsWhen a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).1Press   to open a contact card or go to the groups list, and select a contact group.2Select Options >Ringing tone. A list of ringing tones opens.3Select the ringing tone you want to use for the individual contact or the selected group.???You can also use a video clip as a ringing tone.???To remove the ringing tone, select Default tone from the list of ringing tones.Create contact groups1In Contacts, press   to open the groups list.2Select Options >New group.3Write a name for the group or use the default name Group %N, and select OK.4Open the group, and select Options >Add members.5Scroll to a contact, and press   to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.6Select OK to add the contacts to the group.To rename a group, select Options >Rename, enter the new name, and select OK.Remove members from a group1In the groups list, open the group you want to modify.2Scroll to the contact, and select Options >Removefrom group.3Select Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options >Belongs to groups.R1114_en.book  Page 63  Friday, September 16, 2005  9:36 AM
Web64WebVarious service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.Press , and select Web. Shortcut: To start a connection, press and hold   in the standby mode.Web access pointTo access pages, you need Web service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See ‘Data and settings’, p. 43. For more information, contact your network operator or service provider. Tip! Settings may be available on the Web site of a network operator or service provider.Enter settings manually1Press , select Tools >Settings >Connection > Access points, and define the settings for an access point. Follow the instructions given to you by your service provider. See ‘Connection settings’, p. 90.2Press , and select Web >Options >Bookmark manager >Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point.3To set the created access point as the default access point, select Options >Settings >Access point.Bookmarks viewThe bookmarks view opens when you open Web.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. indicates the starting page defined for the default access point.R1114_en.book  Page 64  Friday, September 16, 2005  9:36 AM
Web65Connection securityIf the security indicator   is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Select Options >Details >Security to view details about the connection, encryption status, and information about server and user authentication.Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also ‘Certif. management’, p. 94.BrowseImportant: Use only services that you trust and that offer adequate security and protection against harmful software.To download a page, select a bookmark, or enter the address in the field ( ).On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.To open links and make selections, press  . Shortcut: Use   to jump to the end of a page and  to the beginning of a page.To go to the previous page while browsing, select Back. If Back is not available, select Options >Navigationoptions >History to view a chronological list of the pages you visited during a browsing session.To retrieve the latest content from the server, select Options >Navigation options >Reload.To save a bookmark, select Options >Save as bookmark. Tip! To access the bookmarks view while browsing, press and hold  . To return to the browser view, select Options >Back to page.To save a page while browsing, select Options >Advanced options >Save page. You can save pages to the device memory or memory card (if inserted), and browse them when offline. To access the pages later, press   in the bookmarks view to open the Saved pages view.To enter a new URL address, select Options >Navigation options >Go to web address.R1114_en.book  Page 65  Friday, September 16, 2005  9:36 AM
Web66To open a sublist of commands or actions for the currently open page, select Options >Service options.You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press  .When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options >Tools >Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.1To download the item, scroll to the link, and press  .2Select the appropriate option to purchase the item, for example, “Buy”.3Carefully read all the information provided.To continue the download, select Accept. To cancel the download, select Cancel.End a connectionTo end the connection and view the browser page offline, select Options >Advanced options >Disconnect, or to end the connection and close the browser, selectOptions >Exit.Empty the cacheThe information or services you have accessed are stored in the cache memory of the device.A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have R1114_en.book  Page 66  Friday, September 16, 2005  9:36 AM
Web67accessed are stored in the cache. To empty the cache, select Options >Advanced options >Clear cache.Web settingsSelect Options >Settings and from the following:Access point—Change the default access point. See ‘Connection settings’, p. 90. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Show images and objects—Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options >Show images.Font size—Select the text size.Default encoding—If text characters are not shown correctly, you can select another encoding according to language.Automatic bookmarks—Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.Homepage—Define the home page.Search page—Define a Web page that is downloaded when you select Navigation options >Open search pagein the bookmarks view, or when browsing.Volume—If you want the browser to play sounds embedded on Web pages, select a volume level.Rendering—If you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed.Cookies—Enable or disable the receiving and sending of cookies.Java/ECMA script—Enable or disable the use of scripts.Security warnings—Hide or show security notifications.Confirm touch tones—Select whether you want to confirm before the device sends touch tones during a voice call. See also ‘Options during a voice call’, p. 58.R1114_en.book  Page 67  Friday, September 16, 2005  9:36 AM
Calendar68CalendarUse Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes.Create calendar entries Shortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subjectfield. In the to-do view, a to-do note entry opens.1Press , and select Calendar >Options >New entry and one of the following:Appointment—to remind you of an appointment that has a specific date and timeMeeting request—tosend a meeting request by e-mail (a mailbox must be defined in the device)Memo—to write a general entry for a dayAnniversary—to remind you of birthdays or special dates (entries are repeated every year)To-do—to remind you of a task that needs doing by a specific date2Fill in the fields. To set an alarm, select Alarm >On,and enter the Alarm time and Alarm date.To add a description for an appointment or a meeting, select Options >Add description.3To save the entry, select Done.When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze.Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronizationoption.Meeting requestsIf you receive a meeting request to the mailbox in your device, the request is saved to the calendar when you open the e-mail.R1114_en.book  Page 68  Friday, September 16, 2005  9:36 AM
Calendar69You can view received meeting requests in the mailbox or in the calendar. To respond to a meeting request via e-mail, select Options >RespondCalendar views Tip! Select Options >Settings to change the starting day of the week or the view that is shown when you open the calendar.In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press  .To go to a certain date, select Options >Go to date. To jump to today, press  .To send a calendar note to a compatible device, select Options >Send.To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options >Print.Manage your calendar entriesDeleting past entries in Calendar saves space in your device memory.To delete more than one event at a time, go to the month view, and select Options >Delete entry >Before date or All entries.To mark a task as completed, scroll to it in the to-do view, and select Options >Mark as done.Calendar settingsTo modify the Calendar alarm tone,Default view,Week starts on, and Week view title, and Default mailbox ,select Options >Settings.R1114_en.book  Page 69  Friday, September 16, 2005  9:36 AM
My own70My ownVisual RadioYou can use the Visual RadioTM application as a traditional FM radio with automatic tuning and saved stations, and, if you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.To use the Visual Radio service, the following conditions are required:• The device must be switched on.• The device must have a valid SIM card inserted.• The station you listen to and the network operator you use must support this service.• An Internet access point must be defined to access the operator’s visual radio server.• The station must have the correct Visual Radio service ID defined and Visual Radio service enabled. See ‘Saved stations’, p. 11.If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries.The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.You can listen to the radio with the built-in loudspeaker or a compatible headset. When using the loudspeaker, keep the headset plugged in the device. The lead of the headset functions as the antenna of the radio, so let it hang freely. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can normally make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call. When the call is finished, you may need to turn the radio back on manually.The radio selects the used frequency band based on the  country information received from the network. If this information is not available, you may be asked to select R1114_en.book  Page 70  Friday, September 16, 2005  9:36 AM
My own71the region you are located in, or you can select the region in the Visual radio settings.Visual Radio can be used for listening when the device cover is closed.   Channel information may be displayed on the cover display  To mute or unmute the radio, press the cover key. Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press  , and select Radio.To start a station search, select   or  . Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning.If you have previously saved radio stations, select   or  to go to the next or previous saved station, or select the memory location of a station by pressing the corresponding number key. ED: REQUEST NEW GRAPHICTo adjust the volume, press  or  . To listen to the radio using the loudspeaker, select Options >Activate loudsp..To view available stations based on location, select Options >Station directory (network service).To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options >Stations. See ‘Saved stations’, p. 11.To return to the standby mode and leave the FM radio playing in the background, select Options  > Play in background.View visual contentTo check availability and costs, and to subscribe to the service, contact your network operator or service provider.Add graphic and iconsin text to show the on-screen buttonsR1114_en.book  Page 71  Friday, September 16, 2005  9:36 AM
My own72To view available visual content for a tuned station, select  or Options > Station  > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service)...When the connection to the visual service is established, the display shows the current visual content designed by the content provider.To adjust display settings for the visual content view, select Options >Display settings >Lighting or Screen saver timeout.Saved stationsYou can save up to 20 radio stations in Visual Radio. To open your station list, select Options >Stations.To listen to a saved station, select Options >Station >Listen. To view available visual content for a station with Visual Radio service, select Options >Station >Start visual service.To change station details, select Options >Station >Edit.SettingsSelect Options >Settings and from the following:Start-up tone—Select if a tone is played when the application is started.Auto-start service—Select Yes to have the Visual Radio service start automatically when you select a saved station that offers visual service.Access point—Select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.Current region—Select the region you are currently located in. This setting is displayed only if there was no network coverage when the application was started.Go to—add shortcutsPress , and select My own >Go to. Default shortcuts are the following:   opens Calendar,  opens Inbox,and  opens Notes.IM—instant messagingPress , and select My own >IM.Instant messaging (network service) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can R1114_en.book  Page 72  Friday, September 16, 2005  9:36 AM
My own73log in to after you register to an IM service. Service providers may differ in their support of features.Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Recorded chats to view a previous instant messaging session that you saved.Check the availability of services, pricing, instructions, and fees with your network operator or service provider.Receive IM settingsYou must save the settings to access the service that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the IM service. See ‘Data and settings’, p. 43. You can also enter the settings manually. See ‘Chat server settings’, p. 14.Connect to an IM server1To connect to the IM server in use, open IM, and select Options >Login. To change the IM server in use and save new IM servers, see ‘Chat server settings’, p. 14.2Enter your user ID and password, and press   to log in. You obtain the user ID and password for the IM server from your service provider.3To log out, select Options >Logout.Modify your IM settingsSelect Options >Settings >IM settings and from the following:Use screen name (shown only if IM groups are supported by the server)—To enter a nickname, select Yes.IM presence—To allow others to see if you are online, select Active for all.Allow messages from—To allow messages from all, select All.Allow invitations from—To allow invitations only from your IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups.Msg. scrolling speed—Select the speed at which new messages are displayed.Sort IM contacts—Select how your IM contacts are sorted: Alphabetically or By online status.Availability reloading—To select how to update information about whether your IM contacts are online or offline, select Automatic or Manual.Offline contacts—Select whether IM contacts with an offline status are shown in the IM contacts list.R1114_en.book  Page 73  Friday, September 16, 2005  9:36 AM
My own74Search for IM groups and usersTo search for groups, in the IM groups view, select Options >Search. You can search by Group name,Topic,and Members (user ID).To search for users, in the IM contacts view, select Options >New IM contact >Search from server. You can search by User's name,User ID,Phone number, and E-mail address.Join IM groupsThe IM groups view shows a list of the IM groups that you have saved or are currently joined to.To join a saved IM group, press  .To join an IM group that is not on the list, but for which you know the group ID, select Options >Join new group.To leave the IM group, select Options >Leave IM group.ChatAfter you join an IM group, you can view the messages that are exchanged there, and send your own messages.To send a message, write the message in the message editor field, and press  .To send a private message to a participant, select Options >Send private msg..To reply to a private message sent to you, select the message and Options >Reply.To invite IM contacts who are online to join the IM group, select Options >Send invitation.To prevent receiving messages from certain participants, select Options >Blocking options and the desired option.Record chatsTo record the messages that are exchanged during a conversation or while you are joined in a IM group, select Options >Record chat. To stop recording, select Options >Stop recording. To view the recorded chats, in the main view, select Recorded chats.View and start conversationsThe Conversations view shows a list of the individual conversation participants that you have an ongoing conversation with. Ongoing conversations are automatically closed when you exit IM.To view a conversation, scroll to a participant, and press .To continue the conversation, write your message, and press .R1114_en.book  Page 74  Friday, September 16, 2005  9:36 AM
My own75To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options >End conversation.To start a new conversation, select Options >Newconversation.To save a conversation participant to your IM contacts, select Options >Add to IM contacts.To send automatic replies to incoming messages, select Options >Set auto reply on. You can still receive messages.IM contactsIn the IM contacts view, you can retrieve chat contact lists from the server, or add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list is retrieved from the server automatically.Chat server settingsSelect Options >Settings >Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider.Servers—View a list of all defined IM servers.Default server—Change the IM server to which you want to connect.IM login type—To log in automatically when you start IM,select On app. start-up.To add a new server to your list of IM servers, select Servers >Options >New server. Enter the following settings:Server name—the name for the chat serverAccess point in use—the access point you want to use for the serverWeb address—the URL address of the IM serverUser ID—your user IDPassword—your login passwordGamesPress  , and select My own and a game. For instructions on how to play the game, select Options > Help.R1114_en.book  Page 75  Friday, September 16, 2005  9:36 AM
Connectivity76ConnectivityBluetooth connectivityYou can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); connect to a compatible printer to print images with Image print. See ‘Image print’, p. 33.Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Basic Printing Profile, Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File Transfer Profile, Basic Imaging Profile, SIM Access profile, and Human Interface Device Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the Handsfree Profile is used between the handsfree device and the phone. For devices to be compatible, they must support the same profiles.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.When the device is locked, you cannot use Bluetooth connectivity. See ‘Security’, p. 93 for more information on locking the device.R1114_en.book  Page 76  Friday, September 16, 2005  9:36 AM
Connectivity77SettingsPress  , and select Connect. >Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology.Select from the following:Bluetooth—Select On or Off. To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection.My phone's visibility—To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden.My phone's name—Edit the name of your device.Remote SIM mode—To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 11. Activate the remote SIM mode from the other device.When remote SIM mode is on in your Nokia XX, #RemoteSIM is displayed in the standby mode. The connection to the wireless network is turned off, as indicated by   in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.Warning: In the remote SIM mode, you cannot make or receive any calls with your device, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first leave the remote SIM mode. If the device has been locked, enter the lock code.To leave the remote SIM mode, press the power key, and select Exit rem. SIM mode.Security tipsWhen you are not using Bluetooth connectivity, select Bluetooth >Off or My phone's visibility >Hidden.Do not pair with an unknown device.R1114_en.book  Page 77  Friday, September 16, 2005  9:36 AM
Connectivity78Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same time.Bluetooth connectivity indicators• When   is shown in the standby mode, Bluetooth connectivity is on.• When   is blinking, your device is trying to connect with another device.• When   is shown continuously, data is being transmitted using Bluetooth connectivity. Tip! To send text using Bluetooth connectivity, open Notes, write the text, and select Options >Send >ViaBluetooth.1Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery.2Select the item and Options >Send >Via Bluetooth.Devices with Bluetooth technology within range start to appear on the display.Device icons:   computer,   phone,   audio or video device, and   other device.To interrupt the search, select Stop.3Select the device with which you want to connect.4If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 11.5When the connection has been established, Sending data is shown.The Sent folder in Messaging does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetoothapplication main view, press  .Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.To pair with a device, select Options >New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view.R1114_en.book  Page 78  Friday, September 16, 2005  9:36 AM
Connectivity79Paired devices are indicated by   in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options:Set as authorized—Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.   indicates authorized devices in the paired devices view.Set as unauthorized—Connection requests from this device must be accepted separately every time.To cancel a pairing, scroll to the device, and select Options >Delete. If you want to cancel all pairings, select Options >Delete all.Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off.Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept,   is shown, and the item is placed in the Inbox folder in Messaging. Messages received through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 42.Switch off Bluetooth connectivityTo switch off Bluetooth connectivity, select Bluetooth >Off.Infrared connectionWith infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device.Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.Send and receive data using infrared1Make sure that the infrared ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet).2The user of the receiving device activates the infrared port.R1114_en.book  Page 79  Friday, September 16, 2005  9:36 AM
Connectivity80To activate the infrared port of your device to receive data through infrared, press  , and select Connect. >Infrared.3The user of the sending device selects the desired infrared function to start the data transfer.To send data through infrared, locate the desired file in an application or the file manager, and select Options >Send >Via infrared.If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.All items received through infrared are placed in the Inboxfolder in Messaging. New infrared messages are indicated by .When   blinks, your device is trying to connect to the other device or a connection has been lost.When   is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.Data cablePress  , and select Connect. >Data cable. In Data cable mode, select what the USB data cable connection is used for: PC Suite or Data transfer. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection.PC connectionsYou can use your device with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, transfer images between your device and a compatible PC.Always create the connection from the PC to synchronize with your device.Your device as a modemYou can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable. Detailed installation instructions can be found in the User Guide for Nokia PC Suite.Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite.R1114_en.book  Page 80  Friday, September 16, 2005  9:36 AM
Connectivity81Connection managerPress , and select Connect. >Conn. mgr.. To view the status of data connections or end connections in GSM and UMTS network, select Active data connections.Data connectionsIn the active connections view, you can see the open data connections: data calls ( ) and packet data connections (  and  ). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To end a connection, select Options >Disconnect. To close all open connections, select Options >Disconnect all.To view the details of a connection, select Options >Details. The details shown depend on the connection type.SynchronizationPress  , and select Connect. >Sync.Sync enables you to synchronize your notes, calendar, contacts, or e-mail with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.You may receive synchronization settings in a special text message. See ‘Data and settings’, p. 43.Synchronize dataIn the Sync main view, you can see the different synchronization profiles.1Select a synchronization profile and Options >Synchronize. The status of the synchronization is shown on the display.To cancel synchronization before it finishes, select Cancel.2You are notified when the synchronization is complete. Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server.R1114_en.book  Page 81  Friday, September 16, 2005  9:36 AM
Connectivity82Device managerPress , and select Connect. >Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options >Start configuration.To allow or deny receiving of configuration settings from service providers, select Options >Enable config. or Disable config..Server profile settingsContact your service provider for the correct settings. Server name—Enter a name for the configuration server.Server ID—Enter the unique ID to identify the configuration server.Server password—Enter a password to identify your device to the server.Access point—Select an access point to be used when connecting to the server.Host address—Enter the URL address of the server.Port—Enter the port number of the server.User name and Password—Enter your user name and password.Allow configuration—To receive configuration settings from the server, select Yes.Auto-accept all reqs.—If you want your device to ask for confirmation before accepting a configuration from the server, select No.R1114_en.book  Page 82  Friday, September 16, 2005  9:36 AM
Office83OfficeCalculatorTo add, substract, multiply, divide, and calculate square roots and percentages, press  , and select Office >Calculator.Note: This calculator has limited accuracy and is designed for simple calculations.ConverterTo convert measures from one unit to another, press  , and select Office >Converter.Converter has limited accuracy, and rounding errors may occur.1In the Type field, select the measure you want to use.2In first Unit field, select the unit from which you want to convert. In the next Unit field, select the unit to which you want to convert.3In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.Set base currency and exchange ratesSelect Type >Currency >Options >Currency rates.Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1.Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. NotesTo write notes, press  , and select Office >Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes.To print a note on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options >Print.R1114_en.book  Page 83  Friday, September 16, 2005  9:36 AM
Office84RecorderTo record voice memos, press  , and select Office >Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.R1114_en.book  Page 84  Friday, September 16, 2005  9:36 AM
Personalize your device85Personalize your deviceYour service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.The open applications, and folders that have applications open, are indicated by a small icon (ICON) in the main menu.• To use the standby display for fast access to your most frequently used applications, see ‘Active standby mode’, p. 11.• To change the standby mode background image or what is shown in the screen saver, see ‘Change the look of your device’, p. 10.• To customize the ringing tones, see ‘Profiles—set tones’, p. 9 and ‘Add ringing tones for contacts’, p. 63.• To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see ‘Standby mode’, p. 89. • To change the clock shown in the standby mode, press , and select Clock >Options >Settings >Clock type >Analog or Digital.• To change the welcome note to an image or animation, press , and select Tools >Settings >Phone >General >Welcome note or logo.• To change the main menu view, in the main menu, select Options >View >Grid or List.• To rearrange the main menu, in the main menu, select Options >Move,Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu.Profiles—set tonesTo set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press  , and select Tools >Profiles.R1114_en.book  Page 85  Friday, September 16, 2005  9:36 AM
Personalize your device86To change the profile, press   in the standby mode. Scroll to the profile you want to activate, and select OK.To modify a profile, press  , and select Tools >Profiles.Scroll to the profile, and select Options >Customize.Scroll to the setting you want to change, and press   to open the choices. Tones stored on the memory card are indicated with  . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.If you want the caller’s name to be said when your device rings, select Options >Customize, and set Say caller’s name to On. The caller’s name must be saved in Contacts.To create a new profile, select Options >Create new.Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by   in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. Warning: Your device must be switched on to use Offline profile. Do not switch the device on when wireless device use is prohibited or when it may cause interference or danger.To leave the Offline profile, press the power key, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If a Bluetooth connection is activated before entering the Offline profile, it will be deactivated. A Bluetooth connection is automatically reactivated after leaving the Offline profile. See ‘Settings’, p. 77.Change the look of your deviceTo change the look of the display, such as the wallpaper and icons, press  , and select Tools >Themes. The active theme is indicated by  . In Themes you can group together elements from other themes or select images from the Gallery to personalize themes further. The R1114_en.book  Page 86  Friday, September 16, 2005  9:36 AM
Personalize your device87themes on the memory card (if inserted) are indicated by . The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first.To open a browser connection and download more themes, select Theme downloads.To activate a theme, scroll to it, and select Options >Apply. To preview a theme before activating it, select Options >Preview.To edit themes, scroll to a theme, and select Options >Edit to change the Wallpaper and Power saver settings.To restore the selected theme to its original settings, select Options >Restore orig. theme when you edit a theme.Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.Press , select Tools >Settings >Phone >Standby mode >Active standby, and press   to switch the active standby on or off.The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below.Scroll to an application or event, and press  .The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on.To change the default applications shortcuts, press  , select Tools >Settings >Phone >Standby mode >Activestandby apps., and press  .Some shortcuts may be fixed, and you are not able to change them.R1114_en.book  Page 87  Friday, September 16, 2005  9:36 AM
Tools88ToolsICON- Media keyTo open the shortcut assigned to the multimedia key, press and hold  . To open a list of multimedia applications, press  . To open the desired application, use the scroll key. To exit the list without selecting an application, press and hold  .To change the shortcuts, press  , and scroll down. To change the default shortcut, select Multimedia key. To change the applications that are shown when you press , select Top,Left,Middle, and Right and the application.Some shortcuts may be fixed, and you are not able to change them.SettingsTo change settings, press  , and select Tools >Settings.To open a settings group, press  . Scroll to a setting you want to change, and press  .Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them.Phone settingsGeneralPhone language—Changing the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.Changing the settings for Phone language or Writinglanguage affects every application in your device, and the change remains effective until you change these settings again.Writing language—Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used.R1114_en.book  Page 88  Friday, September 16, 2005  9:36 AM
Tools89Predictive text—Set the predictive text input On or Offfor all editors in the device. The predictive text dictionary is not available for all languages.Welcome note or logo—The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.Orig. phone settings—You can reset some of the settings to their original values. To do this, you need the lock code. See ‘Security’, ‘Phone and SIM’, p. 15. After resetting, the device may take a longer time to power on. Documents and files are unaffected.Standby modeActive standby—Use shortcuts to applications in the standby mode. See ‘Active standby mode’, p. 87.Left selection key—Assign a shortcut to the left selection key ( ) in the standby mode.Right selection key—Assign a shortcut to the right selection key ( ) in the standby mode.Active standby apps.—Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the active standby is on.Operator logo—This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.DisplayBrightness—Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted.Pwr. saver time-out—Select the time-out period after which the ?screen saver is activated.Light time-out—Select a time-out after which the backlight of the display is switched off.Power saver LED—Select whether the display is switched off to save battery power 20 minutes after the ?screen saver is activated. When the display is switched off, a LED blinks to indicate that the device is powered on.Call settingsSend my caller ID—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service).R1114_en.book  Page 89  Friday, September 16, 2005  9:36 AM
Tools90Call waiting—If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).Reject call with SMS—Select Yes to send a text message to a caller informing why you could not answer the call. See ‘Answer or reject a call’, p. 57.Message text—Write a text to be sent in a text message when you reject a call.Automatic redial—Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press .Summary after call—Activate this setting if you want the device to briefly display the approximate duration of the last call.1-touch dialing—Select On, and the numbers assigned to the 1-touch dialing keys (  -  ) can be dialled by pressing and holding the key. See also ‘Speed dial a phone number’, p. 52.Anykey answer—Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and .Line in use—This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected,   is shown in the standby mode. Tip! To switch between the phone lines, press and hold   in the standby mode.Line change—To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.Connection settingsData connections and access pointsYour device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a data connection.To establish a data connection, an access point is required. You can define different kinds of access points, such as:R1114_en.book  Page 90  Friday, September 16, 2005  9:36 AM
Tools91• MMS access point to send and receive multimedia messages• Access point for the Web application to view WML or XHTML pages• Internet access point (IAP) to send and receive e-mail and connect to the InternetCheck the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider.Access pointsYou may receive access point settings in a message from a service provider. See ‘Data and settings’, p. 43. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.   indicates a protected access point. indicates a packet data access point.To create a new access point, select Options >New access point. To edit the settings of an access point, select Options >Edit. Follow the instructions from your service provider.Connection name—Enter a descriptive name for the connection.Data bearer—Select the data connection type.Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.Packet dataFollow the instructions from your service provider.Access point name—You obtain the access point name from your network operator or service provider.User name—The user name may be needed to make a data connection, and is usually provided by the service provider.Prompt password—If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.Password—A password may be needed to make a data connection, and is usually provided by the service provider.Authentication—Select Normal or Secure.Homepage—Depending on the access point you are setting up, enter the Web address or the address of the multimedia messaging center.R1114_en.book  Page 91  Friday, September 16, 2005  9:36 AM
Tools92Select Options >Advanced settings to change the following settings:Network type—Select the Internet protocol type to use: IPv4 settings or IPv6 settings. The other settings depend on the selected network type.Phone IP address (for IPv4 only)—Enter the IP address of your device. DNS address—In Primary name server:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.Proxy serv. address—Define the address for the proxy server.Proxy port number—Enter the proxy port number.Homepage—Define a home page.Select Options > Advanced settings and from the following:IPv4 settings:Phone IP address (the IP address of your device), Subnet mask (the subnet IP address), Default gateway (the gateway), and DNS address—enter the IP addresses of the primary and secondary DNS server. Contact your Internet service provider for these addresses.IPv6 settings >DNS address—Select Automatic,Well-known, or User defined.Ad-hoc channel (only for Ad-hoc)—To enter a channel number (1-11) manually, select User defined.Proxy serv. address—Enter the address for the proxy server.Proxy port number—Enter the proxy port number.Packet dataThe packet data settings affect all access points using a packet data connection.Packet data conn.—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.Access point—The access point name is needed to use your device as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your network operator or service provider in a configuration message, or R1114_en.book  Page 92  Friday, September 16, 2005  9:36 AM
Tools93the settings may be stored on your (U)SIM card. You can save these settings to your device, view, or delete them in Configurations.Date and timeSee ‘Clock settings’, p. 12, and language settings in ‘General’, p. 9.SecurityPhone and SIMPIN code request—When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See ‘Glossary of PIN and lock codes’, p. 15.PIN code,PIN2 code, and Lock code—You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of these codes, contact your service provider. See ‘Glossary of PIN and lock codes’, p. 15.Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.Autolock period—You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None.To unlock the device, enter the lock code.When the device is locked, calls still may be possible to the official emergency number programmed into your device. Tip! To lock the device manually, press  . A list of commands opens. Select Lock phone.Lock if SIM changed—You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.Closed user group—You can specify a group of people to whom you can call and who can call you (network service).When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.Confirm SIM services—You can set the device to display confirmation messages when you are using a SIM card service (network service).Glossary of PIN and lock codesR1114_en.book  Page 93  Friday, September 16, 2005  9:36 AM
Tools94If you forget any of these codes, contact your service provider.Personal identification number (PIN) code—This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.UPIN code—This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones.PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.Lock code (also known as security code)—This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider.Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.UPUK code—This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device.Certif. managementDigital certificates do not guarantee safety; they are used to verify the origin of software.In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press   to see a list of personal certificates, if available.Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown R1114_en.book  Page 94  Friday, September 16, 2005  9:36 AM
Tools95even if the certificate should be valid, check that the current date and time in your device are correct.View certificate details—check authenticityYou can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.To check certificate details, scroll to a certificate, and select Options >Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:•Certificate not trusted—You have not set any application to use the certificate. See ‘Change the trust settings’, p. 16.•Expired certificate—The period of validity has ended for the selected certificate.•Certificate not valid yet—The period of validity has not yet begun for the selected certificate.•Certificate corrupted—The certificate cannot be used. Contact the certificate issuer.Change the trust settingsBefore changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Scroll to an authority certificate, and select Options >Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:•Symbian installation:Yes—The certificate is able to certify the origin of a new Symbian operating system application.•Internet:Yes—The certificate is able to certify servers.•App. installation:Yes—The certificate is able to certify the origin of a new JavaTM application.Select Options >Edit trust setting to change the value.Track protect. objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.Call divertingR1114_en.book  Page 95  Friday, September 16, 2005  9:36 AM
Tools96Call diverting allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.Select which calls you want to divert and the desired divert option. To divert voice calls when your number is busy or when you reject incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).Several divert options can be active at the same time. When all calls are diverted,   is shown in the standby mode.Call barring and call diverting cannot be active at the same time.Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider.Select the desired barring option, and set it on (Activate)or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.Call barring and call diverting cannot be active at the same time.When calls are barred, calls may be possible to the official emergency number programmed into your device.NetworkYour device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with  in the standby mode. The UMTS network is indicated with .Network mode (shown only if supported by the operator)—Select which network to use. If you select Dualmode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details.Operator selection—Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device.R1114_en.book  Page 96  Friday, September 16, 2005  9:36 AM
Tools97 Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.Cell info display—Select On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.Enhancement settingsIn the standby mode,   indicates a headset is connected, and    that the headset is unavailable, or a Bluetooth connection to a headset is lost.   indicates a loopset is connected and    that a TTY is connected.Select Headset,Loopset,TTY,Bluetooth handsfree, or Music stand and from the following:Default profile—Set the profile that you want activated each time you connect a certain enhancement to your device. See ‘Profiles—set tones’, p. 85. Automatic answer—Set if you want the device to answer an incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for TTY.Lights (for music stand only)—Set whether lights remain on, or are switched off after the time-out.If you are using a TTY, you must activate it on your device. Press  , and select Tools >Settings >Enhancement >TTY >Use TTY >Yes.Voice commandsYou can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see ‘Voice dialing’, p. 52.To activate enhanced voice commands for starting applications and profiles, you must open the Voice com.application and its Profiles folder. Press  , and select Tools >Voice com. >Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold   in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list.To add more applications to the list, select Options >New application. To add a second voice command that can be used to start the application, select Options >Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms.R1114_en.book  Page 97  Friday, September 16, 2005  9:36 AM
Tools98To listen to the synthesized voice tag, select Options >Playback.To change voice command settings, select Options >Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesizer >Off. To reset voice recognition learning, for example, when the main user of the device has changed, select Reset voice adapts..Application managerPress  , and select Tools >Manager. You can install two types of applications and software to your device:• J2ME™ applications based on Java™ technology with the extension .jad or .jar ( ). • Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia NXX. Software providers will often refer to the official model number of this product: the Nokia NXX-X.Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a memory card (local disk).Install applications and software   indicates a .sis application,   a Java application,  that the application is not fully installed,and    that the application is installed on the memory card.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Before installation, note the following:• To view the application type, version number, and the supplier or manufacturer of the application, select Options >View details.• To display the security certificate details of the application, select Options >View certificate. See ‘Certif. management’, p. 15.• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.R1114_en.book  Page 98  Friday, September 16, 2005  9:36 AM
Tools99• The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.1To locate an installation file, press  , and select Tools >Manager. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messaging >Inbox that contains an installation file.2In Manager, select Options >Install. In other applications, scroll to the installation file, and press  to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.To start an installed application, locate it in the menu, and press .To start a network connection and to view extra information about the application, select Options >Go to web address, if available.To see what software packages are installed or removed and when, select Options >View log.To send your installation log to a help desk so that they can see what is installed or removed, select Options >Send log >Via text message or Via e-mail (available only if the correct e-mail settings are in place).Remove applications and softwareScroll to a software package, and select Options >Remove. Select Yes to confirm.If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.Note: If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.SettingsSelect Options >Settings and from the following:Software installation—Select whether Symbian software can be installed: On,Signed only, or Off.R1114_en.book  Page 99  Friday, September 16, 2005  9:36 AM
Tools100Online certif. check—Select to check the online certificates before installing an application.Default web address—Set the default address used when checking online certificates.Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the Manager main view, scroll to an application, and select Options >Suite settings to change settings related to that specific application.Activation keys for copyright-protected filesCopyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.To view the digital rights activation keys stored in your device, press  , and select Tools >Activ. keys and from the following:Valid keys—View keys that are connected to one or more media files and keys whose validity period has not started yet.Invalid keys—View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.Keys not in use—View keys that have no media files connected to them in the device.To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options >Activate content. Activation keys cannot be updated if Web service message reception is disabled. See ‘Web service messages’, p. 44.To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press .R1114_en.book  Page 100  Friday, September 16, 2005  9:36 AM
Troubleshooting101TroubleshootingQ&AAccess codesQ: What is my password for the lock, PIN, or PUK codes?A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer.If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider.For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.Application not respondingQ: How do I close an application that is not responding?A: To open the application switching window, press and hold . Scroll to the application, and press   to close the application.Bluetooth connectivityQ: Why can’t I find my friend’s device?A: Check that both devices have activated Bluetooth connectivity.Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices.Check that the other device is not in hidden mode.Check that both devices are compatible.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, you can either end the connection using the other device or by deactivating Bluetooth connectivity. Select Connect. > Bluetooth > Off.Browser servicesQ: What do I do if the following message is displayed: No valid access point defined. Define one in Web settings.?A: Insert the correct browser settings. Contact your service provider for instructions. CameraQ: Why do images look smudgy?A: Remove the protective plastic films covering the display and camera. Ensure that the camera lens protection window is clean. DisplayQ: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.R1114_en.book  Page 101  Friday, September 16, 2005  9:36 AM
Troubleshooting102LogQ: Why does the log appear empty?A: You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select My own > Log > Options > Filter > All communication.Memory lowQ: What can I do if my device memory is low?A: You can delete the following items regularly to avoid memory getting low:• Messages from Inbox,Drafts, and Sent folders in Messaging• Retrieved e-mail messages from the device memory• Saved browser pages• Images and photos in GalleryTo delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).Q: How can I save my data before deleting it?A: Save your data using one of the following methods:• Use Nokia PC Suite to make a backup copy of all data to a compatible computer.• Send images to your e-mail address, then save the images to your computer.• Send data using Bluetooth connectivity to a compatible device.• Store data on a compatible memory card.MessagingQ: Why can’t I select a contact?A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.Multimedia messagingQ: What should I do when the device cannot receive a multimedia message because memory is full?A: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details.Q: The note Retrieving message is shown briefly. What is happening?A: The device is trying to retrieve a multimedia message from the multimedia messaging center.Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multimedia message.R1114_en.book  Page 102  Friday, September 16, 2005  9:36 AM
Troubleshooting103Q: How can I end the data connection when the device starts a data connection again and again? A: To stop the device from making a data connection, select Messaging and one of the following:On receiving msg. > Defer retrieval—To have the multimedia messaging centre save the message to be retrieved later, for example, after you have checked the settings. After this change, the device still needs to send information notes to the network. To retrieve the message now, select Retr. immediately.On receiving msg. > Reject message—To reject all incoming multimedia messages. After this change, the device needs to send information notes to the network, and the multimedia messaging centre deletes multimedia messages that are waiting to be sent to you.Multimedia reception > Off—To ignore all incoming multimedia messages. After this change, the device does not make any network connections related to multimedia messaging. PC connectivityQ: Why do I have problems in connecting the device to my PC?A: Make sure that Nokia PC Suite is installed and running on your PC. See the User Guide for Nokia PC Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokia.com.R1114_en.book  Page 103  Friday, September 16, 2005  9:36 AM
Battery information104Battery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for R1114_en.book  Page 104  Friday, September 16, 2005  9:36 AM
Battery information105assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.Authenticate hologram1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3 Scratch the side of the label to reveal a 20-digit code, for example12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4 Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message, key in the 20-digit code, for example 12345678919876543210, and send to +44 7786 200276.National and international operator chargers will apply.You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery. R1114_en.book  Page 105  Friday, September 16, 2005  9:36 AM
Care and maintenance106Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.R1114_en.book  Page 106  Friday, September 16, 2005  9:36 AM
Additional safety information107Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.Operating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 cm (5/8 in) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with a hearing aid should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 cm (6 in) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:• always keep the device more than 15.3 cm (6 in) from their pacemaker;• not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimise the potential for interference.If you suspect interference, switch off your device and move the device away.R1114_en.book  Page 107  Friday, September 16, 2005  9:36 AM
Additional safety information108Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.R1114_en.book  Page 108  Friday, September 16, 2005  9:36 AM
Additional safety information109To make an emergency call:1If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device.2Press   as many times as needed to clear the display and ready the device for calls. 3Enter the official emergency number for your present location. Emergency numbers vary by location.4Press the   key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage.Warning: You cannot make emergency calls in the Imaging mode, because the keypad is not active. To make an emergency call, activate the Fold open mode. Certification information (SAR)THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVESYour mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg)*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device.The highest SAR value for this device when tested for use at the ear is 0.41 W/kg.R1114_en.book  Page 109  Friday, September 16, 2005  9:36 AM
Additional safety information110SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com.* The SAR limit for mobile devices used by the public is 2.0 W/kg averaged over ten grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com.R1114_en.book  Page 110  Friday, September 16, 2005  9:36 AM
111Aaccess points 117settings 118activation keys 128alarmsalarm clock 11calendar 86applicationsinstalling 126Java 126Bbacking up 125Bluetooth 107connecting two devices, pairing 109device address 109factory set passcode 109headset 124pairing 109passcode, glossary explanation 109security 108switching off 110bookmarks 89brightnessdisplay 116,124setting in camera 36,43Ccache, clearing 92calendaralarm 85creating entries 85synchronising PC Suite 86call registerSee logcallsdialled numbers 28duration 28international 20received 28settings 116settings for call divert 122transferring 27cameraadjusting brightness 36,43adjusting colour and lighting 39adjusting flash settings 36adjusting video recorder settings 44edit videos 45flash 38image setup settings 36,39saving video clips 43scenes 39self-timer 38sending images 37sequence mode 38still image camera settings 40R1114_en.book  Page 111  Friday, September 16, 2005  9:36 AM
112CD-ROM 110certificates 121chatSee instant messagingclear screenSee standby modeclearing memorylog information 130clock 11alarm 11settings 11codes 120lock codePIN code 121PIN2 code 121security code 121computer connections 110conference call 20connection settings 117contact cards 31inserting pictures 31sending 32storing DTMF tones 28copyingcontacts between the SIM card and device memory 32text 72copyright protectionsee activation keyscutting text 72Ddata connectionsdetails 111ending 111indicators 9date 11digital rights management, DRMsee activation keysDNS, domain name service, glossary explanation 119Eediting videosadding effects 45adding sound clips 45adding transitions 45custom video clips 45e-mail 73automatic retrieving 78offline 79opening 77remote mailbox 76retrieving from mailbox 77settings 81viewing attachments 77Ffile formats.jad 126R1114_en.book  Page 112  Friday, September 16, 2005  9:36 AM
113.jar 126,127.sis 126RealOne Player 65file manager 12fixed dialing 32FM radio 104Ggalleryordering files in albums 51Hhandsfreesee loudspeakerheadset settings 124help application 10Iindicators 9instant messaging 97blocking 99connecting to a server 98groups 101recording messages 99sending instant messages 99user ID, glossary explanation 100InternetSee WebInternet access points (IAP)See access pointsIP address, glossary explanation 119JJavaSee applicationsLlock code 121logerasing contents 30filtering 29log duration 30loopset settings 124loudspeaker 12Mmailbox 76automatic retrieving 78media filesfast forward 66file formats 65mute sound 66rewind 66memoryclearing memory 28,29viewing memory consumption 13memory card 125memory card adaptersee the Quick Start Guide, reduced-size MultiMediaCard adapterR1114_en.book  Page 113  Friday, September 16, 2005  9:36 AM
114menu, rearranging 15messaginge-mail 73multimedia messages 73text messages 73movies, muveescustom muvees 67quick muvees 67multimedia messages 73mute sound 66Ppacket data connections 111GPRS, glossary explanation 117settings 119pasting text 72PC connectionsvia Bluetooth or USB cable 110PC Suitecalendar data 86synchronisation 110transferring images to a PC 50transferring media files 13transferring music files to your memory card 65viewing phone memory data 13personalisation 17phonebookSee contact cardsPIN code 121profiles 16Rradio 104reminderSee calendar, alarmremote mailbox 76ringing tonespersonal ringing tone 33receiving in a text message 76RSMMC, reduced-size MMCsee the Quick Start GuideSscenesimage scenes 39video scenes 39security codeSee lock codesendingcontact cards, business cards 32images 37video clips 47service commands 69settingsaccess codes 120access points 118Bluetooth connection 107calendar 86R1114_en.book  Page 114  Friday, September 16, 2005  9:36 AM
115call barring 123call diverting 122certificates 121configuring 10cover display 124data connections 117date and time 120display 116headset 124IM 98,102language 115lock code 121loopset 124original settings 115personalising the phone 15PIN code 121screen saver 116UPIN code 121UPUK code 121shortcutsWeb connection 88SIM cardcopying names and numbers to phone 32messages 79names and numbers 32sis file 126SMS centre, short message service centre 80snooze 11softwaretransferring a file to your device 126sound clips 50soundsmuting a ringing tone 26recording sounds 96speed dialing 21standby mode 15synchronisation 112Ttext message service centreadding new 80text messages 73themes 17time 11transferring content from another phone 17UUPIN code 121UPUK code 121USB cable 110USIM cardsee glossary explanation in the Quick Start GuideUSSD commands 69Vvideo call 22answering 26rejecting 26R1114_en.book  Page 115  Friday, September 16, 2005  9:36 AM
116video clips 50video playerSee RealOne PlayerVisual Radio 104viewing content 105visual service ID 105voice commands 124voice dialing 21voice mailbox 20changing the phone number 20diverting calls to voice mailbox 122voice messages 20voice tags 124making calls 21volume control 12during a call 20,23loudspeaker 12WWebaccess points, see access pointsbrowser 88R1114_en.book  Page 116  Friday, September 16, 2005  9:36 AM

Navigation menu