Microsoft RM-67 GSM 900/ 1800/ 1900/wcdma2100 PCS Phone with BT User Manual 831 Exhibit08 User Guide 01
Microsoft Mobile Oy GSM 900/ 1800/ 1900/wcdma2100 PCS Phone with BT 831 Exhibit08 User Guide 01
Contents
- 1. Manual
- 2. manual
Manual
Nokia XXX User Guide
9237522
ISSUE 1 EN DRAFT
R1114_en.book Page 1 Friday, September 16, 2005 9:36 AM
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole
responsibility that the product RM-67 is in conformity
with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity
can be found at http://www.nokia.com/phones/
declaration_of_conformity/
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned
herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998-
200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights
reserved.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.
MPEG-4
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information including that relating to
promotional, internal and commercial uses may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this document
without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC / INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
ISSUE 1 EN, 9237522
legal-information1.fm Page 2 Thursday, September 22, 2005 11:19 AM
3
For your safety...........................................6
Your Nokia N71.........................................9
Essential indicators...............................................................9
Attach the wrist strap........................................................10
Configure settings...............................................................10
Nokia support on the Web................................................10
Help .........................................................................................10
Clock........................................................................................11
Volume and loudspeaker control ....................................12
File manager .........................................................................12
Useful shortcuts...................................................................14
Personalise your device .......................... 15
Profiles—Set tones...............................................................16
Transfer content from another device...........................17
Change the look of your device.......................................17
Active standby mode..........................................................18
Make calls ............................................... 20
Voice calls..............................................................................20
Video calls..............................................................................22
Video sharing .......................................................................23
Answer or reject a call.......................................................26
Log ...........................................................................................28
Contacts (Phonebook).............................31
Save names and numbers.................................................31
Copy contacts.......................................................................32
Add ringing tones for contacts .......................................33
Create contact groups .......................................................33
Camera......................................................36
Take pictures.........................................................................36
Edit images ...........................................................................41
Tips on taking good photographs...................................42
Record videos .......................................................................43
Edit video clips.....................................................................45
Gallery.......................................................50
View images and video clips............................................50
View presentations .............................................................51
Albums ...................................................................................51
Imaging.....................................................64
Image print ...........................................................................64
RealPlayer™...........................................................................65
Movie Director .....................................................................67
Messaging.................................................69
Write text..............................................................................70
Write and send messages .................................................72
R1114_en.book Page 3 Friday, September 16, 2005 9:36 AM
4
Inbox—receive messages................................................... 75
My folders ............................................................................ 76
Mailbox.................................................................................. 76
Outbox—messages waiting to be sent.......................... 79
View messages on a SIM card......................................... 79
Messaging settings............................................................. 79
Calendar....................................................85
Create calendar entries .....................................................85
Calendar views..................................................................... 86
Remove calendar entries................................................... 86
Calendar settings ................................................................ 87
Web...........................................................88
Access the Web ................................................................... 88
Bookmarks view................................................................... 89
Make a connection............................................................. 89
Browse.................................................................................... 90
Download and purchase items........................................ 92
End a connection ................................................................ 92
Web settings......................................................................... 92
Office........................................................94
Calculator.............................................................................. 94
Converter............................................................................... 94
To-do ...................................................................................... 95
Notes ...................................................................................... 95
Recorder................................................................................. 96
My own.....................................................97
Go to—add shortcuts.......................................................... 97
IM—Instant messaging (chat) ........................................97
Visual Radio .......................................... 104
Listen to the radio.............................................................105
View visual content..........................................................105
Saved stations....................................................................105
Settings................................................................................106
Connectivity .......................................... 107
Bluetooth connection......................................................107
PC connections ..................................................................110
Connection manager........................................................111
Remote synchronisation..................................................112
Device manager.................................................................113
Tools....................................................... 115
Settings................................................................................115
Cover display settings......................................................124
Voice commands ...............................................................124
Memory card tool..............................................................125
Application manager........................................................126
Activation keys—handle copyright-protected files .128
R1114_en.book Page 4 Friday, September 16, 2005 9:36 AM
5
Troubleshooting .................................... 129
Q&A...................................................................................... 129
Battery information.............................. 132
Charging and discharging.............................................. 132
Nokia battery authentication guidelines................... 132
Care and maintenance ......................... 134
Additional safety information............. 135
R1114_en.book Page 5 Friday, September 16, 2005 9:36 AM
6
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the phone
on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless phones may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELLING Do not use
the phone at a refuelling point. Do not use
near fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the phone where
blasting is in progress.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your phone is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information stored in your phone.
R1114_en.book Page 6 Friday, September 16, 2005 9:36 AM
7
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone is
switched on and in service. The keypad is
active only in the Fold open mode. Press
as many times as needed to clear the display
and return to the start screen. Enter the
emergency number, then press . Give your
location. Do not end the call until given
permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900/1800/1900 and UMTS 2100
networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
When taking and using images or video clips, obey all laws
and respect local customs as well as privacy and
legitimate rights of others.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
Network Services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For instance,
some networks may not support all language-dependent
characters and services. Network features are designated
in this guide by (network services).
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order and
icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail and content downloading via
R1114_en.book Page 7 Friday, September 16, 2005 9:36 AM
8
browser or over MMS, require network support for these
technologies.
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3 and AC-4 charger, and from
an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or
LCH-12 charger when used with the charger adapter
CA-44 delivered with your phone.
The battery intended for use with this device is BL-5B.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
R1114_en.book Page 8 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
9
Your Nokia NXX
Settings
Your Nokia NXX normally has MMS, GPRS, streaming, and
Internet settings automatically configured in the device,
based upon your service provider or network operator
information. You may have settings from your service
providers already installed in your device, or you may
receive the settings from the service providers as a special
text message.
Transfer content from
another device
You can copy content such as contacts and calendar
entries from a compatible Nokia phone to your Nokia NXX
using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the phone model.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When
Nokia N80 is switched on without a SIM card, the offline
profile is automatically activated.
To avoid duplicate entries, you can transfer the same type
of information (for example, contacts) from the other
device to your Nokia XXX only once.
Transfer content
1Press , and select Tools >Transfer >Copy data on
your Nokia XXX.
2In the information view, select Continue.
3Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
4If you select Bluetooth connectivity:
To have Nokia XX search for devices with Bluetooth
connectivity, select Continue. Select your other device
from the list. You are asked to enter a code on your
Nokia XXX. Enter a code (1-16 digits), and select OK.
Enter the same code on the other device, and select
OK. The devices are now paired. See ‘Pair devices’,
p. 78.
For some phone models, the Transfer application is
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 79.
R1114_en.book Page 9 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
10
5From your Nokia XXX, select the content you want to
copy from the other device.
Content is copied from the memory and memory card (if
inserted) of the other device to the corresponding location
in your Nokia XXX and memory card (if inserted). Copying
time depends on the amount of data to be transferred.
You can cancel copying and continue later.
Essential indicators
The device is being used in a GSM network.
The device is being used in a UMTS network (network
service).
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone,IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service), the
indicator for the first line is and for the second
.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A loopset is connected to the device.
A TTY is connected to the device.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
R1114_en.book Page 10 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
11
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Keypad lock (keyguard)
To lock the keys, close the sliding keypad, and select Yes
when Lock keypad? is displayed. To lock the keys when the
slide is closed, press the power key, and select Lock
keypad.
To unlock, open the sliding keypad, or press (Unlock),
and select OK when Unlock keypad? is displayed.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press or .
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudsp..
To turn off the loudspeaker, select Options >Activate
handset.
Clock
Press , and select Clock. To set a new alarm, select
Options >Set alarm. When an alarm is active, is
shown.
To turn off the alarm, select Stop, or to stop the alarm for
5 minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock >Options >Remove
alarm.
R1114_en.book Page 11 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
12
Clock settings
To change the clock settings, select Clock >Options >
Settings.
To change the time or date, select Time or Date.
To change the clock shown in the standby mode, select
Clock type >Analog or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Auto time update >On.
To change the alarm tone, select Clock alarm tone.
World clock
To open the world clock view, open Clock, and press .
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options >Add city. You
can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options >My current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Headset
Connect a compatible
headset to the Pop-PortTM
connector of your device.
Warning: When you
use the headset, your ability
to hear outside sounds may
be affected. Do not use the
headset where it can
endanger your safety.
Wrist strap
Thread the strap as shown,
and tighten it.
Memory card
You can purchase a compatible miniSD memory card and
use it as extra storage space to save the memory on your
device. You can also back up information from your device
to the memory card.
R1114_en.book Page 12 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
13
Use only compatible miniSD memory cards with this
device. Other memory cards, such as Reduced Size
MultiMediaCards, do not fit in the memory card slot and
are not compatible with this device. Using an incompatible
memory card may damage the memory card as well as the
device, and data stored on the incompatible card may be
corrupted.
Keep all memory cards out of the reach of small children.
Insert the memory card
1To insert the memory
card, place your finger in
the recess on top of the
door of the memory card
slot, and open the door.
2Insert the memory card in
the slot. Make sure that
the contact area on the
card is facing up and
towards the slot with the
bevelled corner facing
the base of the device.
3Push the card in. You can hear a
click when the card locks into
place.
4Close the door. You cannot use
the memory card if the door is
open.
Eject the memory card
1Before you eject the card, press
the power key, and select Remove mem. card. All
applications are closed.
2When Remove memory card and press 'OK' is
displayed, open the door of the memory card slot.
3Press the memory card to release it from the slot.
4Remove the memory card. If the device is switched on,
select OK.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
Memory card tool
Press , and select Tools >Memory. You can use a
miniSD memory card as extra storage space and for
backing up the information in the device memory.
R1114_en.book Page 13 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
14
To back up information from the device memory to a
memory card, select Options >Backup phone mem.
To restore information from the memory card to the
device memory, select Options > Restore from card.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options >Format mem.
card. Select Yes to confirm.
File manager
Many features of the device, such as contacts, messages,
images, videos, ringing tones, calendar notes, documents,
and downloaded applications, use memory to store data.
The free memory available depends on how much data is
already saved in the device memory.
You can use a memory card as extra storage space.
Memory cards are rewritable, so you can delete old
information and save new data on a memory card.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools >File
mgr.. The device memory view ( ) opens. Press to
open the memory card view ( ) (if available).
To move or copy files to a folder, press and at the
same time to mark a file, and select Options >Move to
folder or Copy to folder.
To find a file, select Options >Find and the memory from
which to search, and enter a search text that matches the
file name.
View memory consumption
To view what types of data you have in the device and how
much memory the different data types consume, select
Options >Memory details. The amount of available free
memory is shown in Free memory.
Memory low—free memory
The device notifies you if the device or the memory card
memory is low.
To free device memory, transfer data to a memory card, if
you have one. Mark files to be moved, and select Move to
folder > Memory card, and a folder.
R1114_en.book Page 14 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
15
You can also transfer media files to a compatible PC, for
example, using the transfer option in Gallery. See ‘Gallery’,
p. 29.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
device and transfer data.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox,Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
•Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 98.
• Any other data that you no longer need
Useful shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
Standby mode
• To switch between applications that are open, press
and hold , and select an application. If memory is
low, the device may close some applications. The
device saves any unsaved data before closing an
application.
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
• To start the camera, press and hold the capture key for
more than 1 second.
• To call your voice mailbox (network service), press and
hold .
• To open multimedia applications, press or press and
hold . See ‘ICON- Media key’, p. 88.
• To change the profile, press , and select a profile.
• To switch between Normal and Silent profiles, press
and hold . If you have two phone lines, this action
switches between the two lines.
• To open the last dialed numbers list, press .
• To use voice commands, press and hold .
• To start a connection to Web, press and hold . See
‘Web’, p. 64.
For further shortcuts available in the standby mode, see
‘Active standby mode’, p. 87.
R1114_en.book Page 15 Friday, September 16, 2005 9:36 AM
Your Nokia NXX
16
Edit text and lists
• To mark an item in a list, scroll to it, and press and
at the same time.
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
, then release .
• To copy and paste text: To select letters and words,
press and hold . At the same time, press or
to highlight text. To copy the text to clipboard, while
still holding , select Copy. To insert the text into a
document, press and hold , and select Paste.
Help
Your device has context-sensitive help. When an
application is open, select Options >Help to access help
for the current view.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools >Help.
Select the desired application to view its help topics.
Tutorial
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My own >Tutorial and the section
you want to view.
R1114_en.book Page 16 Friday, September 16, 2005 9:36 AM
Camera
17
Camera
Your Nokia Nxx has two cameras, a high resolution camera
on the back of the device, and a lower resolution camera
above the main display, which is visible when the cover is
opened. Both cameras can be used to take still pictures and
video.
To activate the camera, open the cover, and select Camera.
In the viewfinder, you can see the view to be captured. To
switch between cameras, select Options > Use front
camera or back camera.
The images and video clips are automatically saved in the
Gallery. The cameras produce .jpeg images. Video clips are
recorded in the .3gpp file format with the .3gp file
extension (Normal and Sharing video quality modes) or in
the .mp4 file format (High video quality mode). See ‘Video
settings’, p.17.
You can send images in a multimedia message as an e-mail
attachment, or by using a Bluetooth connection.
Tip! You can insert an image into a contact card. See
‘Save names and numbers’, p.61
Your Nokia Nxx supports an image capture resolution of up
to 1600 x 1200 pixels using the back camera. The image
resolution in these materials may appear different.
Take pictures
If the camera is in video mode, open the image mode by
selecting Options > Image mode.
To select the front camera to, for example, include
yourself in the picture, select Options > Use front
camera. To use the main camera again, select Options >
Use back camera.
To take a picture, press . Do not move the phone before
the image is saved. The image is saved automatically in
the Images&Video folder of Gallery. See ‘Gallery’, p. 29.
To view the Last image, to select Image scenes, or to
adjust Flash or White balance settings before taking a
picture:
• If the viewfinder is active, press or to activate
the camera setup settings.
R1114_en.book Page 17 Friday, September 16, 2005 9:36 AM
Camera
18
•Press or to
choose the item to be
viewed or adjusted, and
press . The settings
available depend on
which camera is
selected??.
• To re-activate the
viewfinder, press Cancel
or .
See ‘Setup settings—Adjust
colour and lighting’, p. 12, and ‘Scenes’, p. 12.
Imaging mode camera indicators show the following:
• The phone memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your phone or the memory card.
• The scene indicator (3) shows the active scene. See
‘Scenes’,p. 12.
• The flash indicator (4)
shows if the flash is set to
Automatic (AF), , On (),
or Off ().
• The night mode indicator
(5) shows that night mode
is active.
• The self-timer indicator
(6) shows that the
self-timer is activated. See
‘You in the picture—self-
timer’, p. 11.
• The sequence mode indicator (7) shows that the
sequence mode is active. See ‘Take pictures in a
sequence’, p. 11.
Press or to zoom in and zoom out. The zoom
indicator, which appears on the side of the viewfinder,
shows the zoom level.
Saving the captured image may take longer if you change
the zoom, lighting, or colour settings.
When taking a picture, note the following:
• Keep the camera still by using both hands.
• To take images in different environments, use the
proper scene for each environment. See ‘Scenes’, p. 12.
• The quality of a zoomed picture is lower than that of a
non-zoomed picture.
Graphic: Screenshot to
indicate the setup (lower)
part of the screen being
active.
Graphic: Screenshot to
show position of the
indicators (to be
numbered).
R1114_en.book Page 18 Friday, September 16, 2005 9:36 AM
Camera
19
• The camera goes into battery saving mode if you do not
make any key presses for a while. To continue taking
pictures, press .
After the image is taken:
• If you do not want to keep the image, select Options >
Delete.
• To send the image Via multimedia,Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 38 and ‘Bluetooth
connectivity’, p. 76. This option is not available during
an active call.
• To send an image to the other party during an active
call, select Options > Send to caller.
• To edit the picture, select Options > Edit. See ‘Edit
images’, p. 14.
• To print the picture, select Options > Print. See ‘Image
print’, p. 33.
Take pictures in a sequence
Select Options > Time lapse to set the camera to take six
pictures in a sequence. You can set the time lapse to be
Fast,Med or Slow.
The pictures are automatically saved in Gallery.
You can also use the
sequence mode with the
Self-timer. See ‘You in the
picture—self-timer’, p. 11.
After taking the pictures,
they are shown in a grid on
the main display. To view a
picture, press to open it.
To return to the sequence
mode viewfinder, press ????.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select Options > Self-timer > 10
seconds,20 seconds or 30 seconds. To activate the self-
timer, select Activate. The self-timer indicator ( ) blinks
and the phone beeps when the timer is running. The
camera takes the picture after the selected delay has
elapsed. You can also use the Self-timer in the sequence
mode. See ‘Take pictures in a sequence’, p. 11.
The flash
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
Graphic: Screenshot to
show a grid of pictures in
Gallery.
R1114_en.book Page 19 Friday, September 16, 2005 9:36 AM
Camera
20
The camera has an LED flashlight for low light conditions.
The following flashlight modes are available: Automatic,
On, and Off.
To use the flash, press or to highlight Flash and
select On.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
Setup settings—Adjust colour and
lighting
To enable the camera to reproduce colours and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Open setup and select from the
following:
Video scenes/Image scenes—Select a scene which is
appropriate for the environment in which you are taking
pictures. See ‘Scenes’, p. 12.
Flash (images only)—Set the flash according to the
lighting conditions. See ‘The flash’, p. 11.
White balance—Select the appropriate setting which
matches the lighting conditions. This allows the camera to
reproduce colours more accurately.
Colour tone—Select the colour effect you want.
The display changes to match any settings made.
The settings return to the default settings when you close
the camera. If you select a new scene, the settings are
replaced by the settings of the selected scene. See ‘Scenes’,
p. 12. If you need to change the setup settings, however,
you can change them after selecting a scene.
The settings available will vary depending on whether you
have the front or main camera selected.
Scenes
A scene helps you to obtain the correct colour and lighting
settings for the current environment. Select the
appropriate scene for taking pictures or recording video
clips from the scenes list. The settings of each scene have
been set to match a certain style or environment. Select
Options > Open setup > Video scenes/Image scenes:
Video scenes
Normal (default)—Use this scene in any conditions.
Night—Use this scene in low light conditions. The night
mode is indicated with .
Image scenes
Automatic (default)—Use this scene in any conditions.
R1114_en.book Page 20 Friday, September 16, 2005 9:36 AM
Camera
21
User defined—Use this scene to create a personalised
scene with your own settings.
Portrait—Use this scene to take portrait pictures, such as
head shots and sitting poses.
Landscape—Use this scene
when you take pictures of
objects that are further away.
Night—Use this scene in low
light conditions. The night
mode is indicated with .
Sports—Use this scene to
take pictures of fast moving
objects. Note that when you
use this scene, the resolution
of the images is reduced from
1600x1200 to 800x600. See ‘Picture quality’, p.14.
When taking pictures, the default scene is Automatic. If
you select the User defined scene however, it is set as the
default scene.
To make your own scene suitable for a certain
environment, select User defined scene. In the user scene
you can adjust Based on mode,Flash,White balance, and
Colour tone, and Reset user scene options. To copy the
settings of another scene, select Based on mode and the
desired scene.
Adjust still image camera settings
There are two kinds of settings for the still image camera:
Image setup settings and main settings. To adjust Image
setup settings, see ‘Setup settings—Adjust colour and
lighting’, p. 12. The setup settings return to the default
settings after you close the camera, but the main settings
remain the same until you change them again. To change
the main settings, select Options > Settings and from the
following:
Image quality—High 2M - Print (resolution 1600x1200),
Med 0.8M - Email (resolution 800x600) or Low 0.3M -
Multimedia (resolution 640x480). The better the image
quality, the more memory the image consumes. Use High
2M - Print for large prints up to 10x8in /25x20cm, Med
0.8M - Email for e-mail and prints up to 6x4in/15x10cm,
or Low 0.3M - Multimedia for use in a multimedia
message. The quality of a zoomed picture is lower than
that of a nonzoomed picture.
Add to album—Select whether you want to save the
image to a certain album in the gallery. If you select Yes,
a list of available albums opens.
Extended zoom—Select On if you want to achieve
maximum zoom but are prepared to accept lower image
resolution (this may then be lower than you have selected
with the Image quality setting. If you want to limit the
Graphic: Screenshot to
show landscape scene??
See Gromit.
R1114_en.book Page 21 Friday, September 16, 2005 9:36 AM
Camera
22
zoom to where the selected image resolution/quality is
maintained, select On. IS THIS CORRECT??
Show captured image—Select On if you want to see the
captured image after it is taken, or Off if you want to
continue taking pictures immediately.
Capture tone—Select Click or Beep as the tone you hear
when you take a picture..
Memory in use—Select where to store your images.
Edit images
To edit the pictures after taking them, or the ones already
saved in Gallery, select Images & Videos > Options >
Edit, and scroll to an image.
Select Options > Apply effect to, for example, crop and
rotate the image; adjust the brightness, colour, contrast,
compression, and resolution; also, to add effects, text, clip
art, or a frame to the picture.
To crop an image, select Options > Apply effect > Crop.
A cross appears on the upper right corner of the image.
Select the area to be cropped by moving the scroll key,
and select Set. Another cross appears on the lower left
corner. Again select the area to be cropped. The selected
areas form a rectangle, which forms the cropped image.
To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto
the eye, and press the scroll key. A loop appears on the
display. To resize the loop to fit the size of the eye, move
the scroll key. Press the scroll key to reduce the redness.
To add clip art to an image, select Options > Apply
effect >Clip art. Select the item you want to add from the
list, and press the scroll key. To move, rotate, and change
the size of the item, select Options > Move,Resize, or
Rotate.
To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select
Options > Move,Resize,Rotate, or Colour.
Shortcuts in the image editor:
• To view an image in full screen, press . To return to
the normal view, press again.
• To rotate an image clockwise or counterclockwise,
press. and .
• To zoom in or zoom out, press and .
Tips on taking good photographs
Picture quality
Use the appropriate picture quality. The camera has four
picture quality settings: Fine (1600x1200), Standard
R1114_en.book Page 22 Friday, September 16, 2005 9:36 AM
Camera
23
(800x600), Basic (640x480) and MMS (xx??.). Use the Fine
setting to make sure that the camera produces the best
picture quality available. Note however, that better picture
quality requires more storage space. For MMS and e-mail
attachments it may be necessary one of the other
settings???. To define the quality in the image mode in the
camera, select Options > Settings..
Background
Use a simple background. For portraits and other pictures
with people, avoid having your subject in front of a
cluttered, complex background that may distract attention
from the subject. Move the camera, or the subject, when
these conditions cannot be met. Move the camera closer to
the object to take clearer portraits.
Depth
When taking pictures of landscapes, add depth to your
pictures by placing objects in the foreground. Note
however, that if the foreground object is too close to the
camera, it may be blurred.
Lighting conditions
Changing the source, amount, and direction of light can
change photographs dramatically. Here are some typical
lighting conditions:
•Light source behind the subject. Avoid placing your
subject in front of a strong light source. If the light
source is behind the subject or visible in the display,
the resulting picture may have weak contrast, may be
too dark, and may contain unwanted lighting effects.
You can use the flash to add more lighting to shadows.
See ‘The flash’, p. 11.
•Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too much
contrast.
•Light source in front of the subject. Harsh sunlight
may cause the subjects to squint their eyes. The
contrast may also be too high.
•Optimal lighting is found in situations where there is
plenty of diffused, soft light available; for example, on
a bright, partially cloudy day or on a sunny day in the
shadow of trees.
Record videos
If the camera is in image mode, select video mode by
selecting Options > Video mode.
To select the front camera to, for example, include
yourself in the video, select Options > Use front camera.
To use the main camera again, select Options > Use back
camera.
R1114_en.book Page 23 Friday, September 16, 2005 9:36 AM
Camera
24
1Press the scroll key to start recording. The record icon
is shown. The LED flash is lit, and a tone sounds,
indicating to the subject that video is being recorded.
There is no flash effect on the resultant video.
2To pause recording at any time, select Pause. The
pause icon blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no key presses within a minute.
3Select Continue to resume recording.
4Select Stop to stop recording. The video clip is
automatically saved to the Images&Video folder of
Gallery. See ‘Gallery’, p. 9.
To view the Last video clip, to select Video scenes, or to
adjust White balance or Colour tone before recording a
video:
• If the viewfinder is
active, press or
to activate the camera
setup settings.
•Press or to
choose the item to be
viewed or adjusted, and
press . The settings
available depend on
which camera is
selected.
• To re-activate the viewfinder, press Cancel or .
See ‘Setup settings—Adjust colour and lighting’, p. 12, and
‘Scenes’, p. 12.
Video recorder indicators
show the following - ED:
WHAT ARE THE ACTUAL
ISETTA ICONS?.
• The phone memory ( )
and memory card ( )
indicators (1) show where
the video is saved.
• The current video length
indicator (2) shows
elapsed time and time
remaining.
• The mode indicator (3) shows the active mode. See
‘Scenes’, p. 12.
• The microphone indicator (4) shows that the
microphone is muted.
• The file format indicator (5) indicates the format of the
video clip.
The zoom indicator, which appears on the side pane, shows
the zoom level. Scroll up or down to zoom in or zoom out
After a video clip is recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
Graphic: Screenshot to
indicate the setup (lower)
part of the screen being
active.
R1114_en.book Page 24 Friday, September 16, 2005 9:36 AM
Camera
25
• If you do not want to keep the video, select Options >
Delete.
• To return to the viewfinder to record a new video, press
the scroll key.
• To send the video Via multimedia,Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 38 and ‘Bluetooth
connectivity’, p. 76. This option is not available during
an active call.
• To send a video clip to the other party during an active
call, select Options > Send to caller.
• To edit the video, select Options > Edit. See also ‘Edit
video clips’ on p.18.
Video settings
There are two kinds of settings for the video recorder: video
setup settings and main settings. To adjust video setup
settings, see ‘Setup settings—Adjust colour and lighting’, p.
12. The setup settings return to the default settings after
you close the camera, but the main settings remain the
same until you change them again. To change the main
settings, select Options > Settings and from the
following:
Audio recording—Select On if you want to record both
image and sound.
Video quality—Set the quality of the video clip to High,
Normal, or Sharing. The quality is indicated with one of
the following icons: (High), (Normal), or
(Sharing). If you select High or Normal, the length of the
video recording is restricted by the available space on your
memory card, and up to 1 hour per clip. If you want to
view the video on a TV or PC, select High video quality,
which has CIF resolution (352x288) and file format .mp4.
You cannot send video clips saved in the .mp4 format in a
multimedia message. If you want to view the clip in
mobile phones, select Normal, which has QCIF resolution
(176x144) and file format .3gp. To send the video clip
through MMS, or send it through video sharing, select
Sharing (QCIF resolution, file format .3gp). See ‘Video
sharing (network service)’, p. 54. The video clip is limited
to 300 kB (approximately 20 seconds in duration) so that
it can be conveniently sent as a multimedia message to a
compatible device. Some networks, however, may only
support sending of multimedia messages with a maximum
size of 100 kB. Contact your service provider for more
information.
Add to album—Select Yes to save the recorded video clip
to a particular album in Gallery.
Show captured video—Select Off to record a video clip
immediately after another. Your videos are not played
after being recorded, and the video recorder is ready for
use again.
R1114_en.book Page 25 Friday, September 16, 2005 9:36 AM
Camera
26
Default video name—Select Date or Text as the default
name for videos you record.
Capture tone—Select Click or Beep as the default name
for videos you record.
Memory in use—Choose the default memory store: phone
memory or memory card.
Edit video clips
You can edit video clips in Gallery. See ‘Gallery’, p.9.
To edit video clips and create custom video clips, scroll to
a video clip, and select Options > Edit. You can create
custom video clips by combining and trimming video clips,
and adding images, sound clips, transitions, and effects.
Transitions are visual effects that you can add to the
beginning and end of the video or between the video clips.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. If you add images, text,
or transitions to a video clip, they are shown on the video
clip timeline. To move on the timelines, press or .
To switch between the timelines, press or .
Edit video, sound, image, text, and
transitions
To create custom video clips, mark and select one or more
video clips, and select Options > Edit.
In the Edit video view, you can insert video clips to make a
custom video clip, and edit the clips by trimming and
adding effects. You can add images and sound clips and
change their duration, and also add text and images to the
clip.
To modify the video, select from the following options:
Edit video clip:
Cut—Trims the video clip in the Cut video clip view.
Add colour effect—Inserts a colour effect in the video clip.
Use slow motion—Slows the speed of the video clip.
Mute audio/Unmute audio—Mutes or unmutes the
original video clip sound.
Move—Moves the video clip to the selected location on the
timeline.
Remove—Removes the video clip from the video.
Duplicate—Makes a copy of the selected video clip.
Edit text (shown only if you have added text)—To move,
remove or duplicate text; change the colour and style of
R1114_en.book Page 26 Friday, September 16, 2005 9:36 AM
Camera
27
the text; define how long it stays on the screen; and add
effects to the text.
Edit image (shown only if you have added an image)—To
move, remove or duplicate an image; define how long it
stays on the screen; and set a background or a colour
effect to the image.
Edit audio clip:
Cut—Trims the sound clip in the Cut sound clip view.
Move—Moves the sound clip to the selected location on
the timeline.
Remove—Removes the sound clip from the video.
Duplicate—Makes a copy of
the selected sound clip.
Change duration—Changes
the length of the sound clip.
Edit transition—There are
three types of transitions: at
the start of a video, at the
end of a video, and
transitions between video
clips. A start transition can
be selected when the first transition of the video is active.
Insert:
Video clip—Inserts the selected video clip. A thumbnail of
the video clip is shown in the main view. A thumbnail
consists of the first non-black frame of the video clip. The
name and length of the selected video clip is also shown.
Image—Inserts the selected image. A thumbnail of the
image is shown in the main view.
Text—Inserts text to the video clip. You can insert a title,
subtitle, or credits.
Audio clip—Inserts the selected sound clip. The name and
length of the selected sound clip is shown in the main
view.
New audio clip—Records a new sound clip to the selected
location.
Movie—To preview the movie in full screen or as a
thumbnail, save or send the movie, or cut the movie to a
suitable size for sending it in a multimedia message.
Tip! To take a snapshot of a video clip, select
Options >Take snapshot in the thumbnail Preview
view or in the Cut video view.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the phone memory.
Tip! In the Settings view, you can define Default
video name,Default snapshot name,Save quality,
and Memory in use.
R1114_en.book Page 27 Friday, September 16, 2005 9:36 AM
Camera
28
Select Send > Via multimedia,Via e-mail, or Via
Bluetooth if you want to send the video. Contact your
service provider for details of the maximum multimedia
message size that you can send. If your video is too large
to be sent in a multimedia message, the symbol
appears.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth.
See ‘Send data using Bluetooth connectivity’, p. 78. You
can also transfer your videos using Bluetooth into your
Bluetooth-enabled personal computer, or by using a
memory card reader (enhancement).
R1114_en.book Page 28 Friday, September 16, 2005 9:36 AM
Gallery
29
Gallery
To store and organise your images, video clips, sound clips,
playlists, and streaming links, press , and select Gallery.
>Images&Video. To open the gallery from the Camera
application, select Options > Go to Gallery. In Camera,
only the Images & video folder is available.
Tip! To switch from Gallery to the camera, select
Camera from the Images & video folder.
.Select Images&Video ,
Tracks , Sound clips
,Links ,
Presentations , or All
files , and press to
open it..
You can browse and open
folders, mark, copy, and
move items to folders and
albums. Sound clips, video
clips, .ram files, and
streaming links are opened and played in the RealPlayer
application. See ‘RealPlayer™’, p. 34. You can also create
albums; and mark, copy, and add items to albums. See
‘Albums’, p. 11.
Tip! You can transfer images from your device to a
compatible PC with Nokia Phone Browser available in
Nokia PC Suite. See the CD-ROM supplied with your
phone.
Press to open a file. Videos, music, and sound clips
open in RealPlayer. See ‘View images and video clips’, p.
10.
To copy or move files to the memory card or to phone
memory, select a file and Options > Organise >Copy to
memory card/Move to memory card or Copy to phone
mem./Move to phone mem..
Files stored on the memory card are indicated with .
To reduce the size of files that you have already copied to
other locations (such as a PC) and so increase free memory
space, in the Images&vidos folder select a file and
Options > Free memory.
To download files into Gallery in one of the main folders
using the browser, select Graphic downls. or Video
downlds.,Track downlds., or Sound downlds.. The
browser opens, and you can select a bookmark from which
the site can download.
R1114_en.book Page 29 Friday, September 16, 2005 9:36 AM
Gallery
30
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images&Video folder in Gallery. The
quality of a video clip is indicated with one of the
following icons: (High), (Normal), and (Low) and
(Sharing). Images and video clips can also be sent to
you in a multimedia message, as an e-mail attachment, or
through a Bluetooth connection. To be able to view a
received image or video clip in the gallery or in the media
player, you must save it in the phone memory or on a
memory card.
Open the Images&Video folder in Gallery. The images and
video clip files are in a loop, and ordered by date. To
browse individual files, press or . To browse files in
groups, press or .
To edit a photo or a video clip, select Options > Edit. An
image editor or a video editor opens.
To add an image or a video clip to an album in the gallery,
select Options > Albums. > Add to album. See ‘Albums’,
p. 11.
To create custom video clips, select a video clip, or several
clips, in the gallery, and select Options > Edit.. See ‘Edit
video clips’, p. 26.
To print your images on a printer connected to your phone,
or to store them on your MMC for printing, select
Options >Print. See ‘Image print’, p. 33.
To zoom an image, select Options > Zoom in or Zoom out.
The zooming ratio is at the top of the display. The zooming
ratio is not stored permanently.
Slide show
Use Slide show to view images and video clips in the full
screen mode. Select from the following:
•Start—to start the slide show.
•Play—to open the RealPlayer application.
•Pause—to pause the slide show
•Continue—to resume the slide show
•End—to close the slide show.
Press (faster) or (slower) to adjust the Tempo.
Press (previous) or (next) to browse the thumbnails.
To add sound to the slide show, in the Images&Video
folder, select Options > Slide show > Music settings and
from the following:
•Music—Select On, or Off.
•Track—Select a music file from the list.
•Volume—Press to decrease the volume, or to
increase the volume.
R1114_en.book Page 30 Friday, September 16, 2005 9:36 AM
Gallery
31
Presentations
With presentations, you can view SVG (scaleable vector
geometry) files. SVG images maintain their appearance
when printed or viewed with different screen sizes and
resolutions. To view SVG files, select the Presentations
folder, scroll to an image, and select Options > Play.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in the
Images&Video folder, select Options > Albums > View
albums. The albums are ordered alphabetically. To view the
content of an album, press the scroll key.
To create a new album, select Options > New album. Enter
a name for the album, and select OK.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options >
Albums. > Add to album. A list of albums opens. Select the
album to which you want to add the picture or video clip,
and press the scroll key.
To remove a file from an album, press . The file is not
deleted from the Images&Video folder in Gallery.
R1114_en.book Page 31 Friday, September 16, 2005 9:36 AM
Media applications
32
Media applications
Music player
Press , and select Music plyr.. With the music player,
you can play music files and create and listen to playlists.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Add music
When you open the music player for the first time, the
player searches the device memory for music files to create
a music library.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
After you add or remove music files in the device, update
your music library. Select Options >Music library >
Options >Update Music library.
Tip! You can transfer music files from your device to
your memory card (if inserted) with Nokia Audio
Manager available in Nokia PC Suite.
Play music
When you open the music player, the previously played
track or playlist is displayed. To view the music library,
select qgn_indi_mup_button_mc_inact or Options >
Music library and the desired song list. To start playing
the songs in the view, select Options >Play.
When a song is playing, to change between play and
pause, press qgn_indi_mup_button_play_hl/
qgn_indi_mup_button_pause_hl.
To stop a song, press qgn_indi_mup_button_stop_inact.
To fast forward or rewind, press and hold
qgn_indi_mup_button_prev_inact or
qgn_indi_mup_button_next_inact. To start playing the
next or previous song, press
qgn_indi_mup_button_prev_inact or
qgn_indi_mup_button_next_inact.
To view the currently played song list, select
qgn_indi_mup_button_playlist_inact or Options >Open
‘Now playing’. To save the song list as a playlist, select
R1114_en.book Page 32 Friday, September 16, 2005 9:36 AM
Media applications
33
Options >Add to track list, and create a new playlist, or
select a saved playlist.
To adjust the volume, press or .
To select between random play and normal play mode,
select Options >Random play. To select whether playing
stops at the end of the playlist or restarts from its
beginning, select Options >Loop.
???Icons in Music plyr.: —Repeat; —Random;
— Repeat and random; and —Loudspeaker
muted.???
Tip! To leave the application open and music playing
in the background, press twice to return to the
standby mode. To return to the application, press ,
and select Music plyr..
To open your Web bookmarks for downloading music,
select Options >Track downloads.
To return to the standby mode and leave the music
playing in the background, select Options >Play in
background.
Music library
To view the music library, select Options >Music library.
All tracks lists all music. To view sorted songs, select
Albums,Artists,Genres, or Composers. The album, artist,
genre, and composer information is collected from the ID3
or M4A tags of the song files, if available.
To add songs, albums, artists, genres or composers to a
playlist, select the items and Options >Add to track list.
You can create a new playlist or add to an existing one.
To view playlists, select Track lists. To create a new
playlist, select Options > New track list. When viewing a
playlist you have created yourself, to add more songs,
select Options >Add tracks.
To delete a playlist, press . Deleting a playlist only
deletes the playlist, not the music files.
Image print
To print images with Image print, select the image you
want to print, and the print option in the gallery, camera,
image editor, or image viewer.
Use Image print to print your images using a data cable,
Bluetooth connectivity, or your memory card (if available).
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpeg format.
Note: To print to a PictBridge-compliant printer,
connect the data cable before you select the print
option.
R1114_en.book Page 33 Friday, September 16, 2005 9:36 AM
Media applications
34
Printer selection
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer. The printer is set as the default printer.
If you have connected a PictBridge-compliant printer
using the CA-53 cable, the printer is automatically
displayed.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options >Settings >
Default printer.
Print preview
The print preview view opens only when you start printing
an image in the gallery.
The selected images are displayed using predefined
layouts. To change the layout, scroll left and right through
the available layouts for the selected printer. If the images
do not fit on a single page, scroll up or down to display the
additional pages.
Print settings
The available options vary, depending on the capabilities of
the printing device you selected.
To set a default printer, select Options >Default printer.
To select the paper size, select Paper size, the size of paper
from the list, and OK. Select Cancel to return to the
previous view.
RealPlayer™
Press , and select Imaging > RealPlayer. With
RealPlayer, you can play video clips, sound clips, and
playlists, or stream media files over the air. You can
activate a streaming link when you browse Web pages, or
store it in the device memory or memory card (if inserted).
RealPlayer supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
For example, RealPlayer attempts to open all .mp4 files,
but some .mp4 files may include content that is not
compliant with 3GPP standards and, therefore, is not
supported by this device.
Play video or sound clips
1To play a media file stored in device memory, or on the
memory card (if inserted), select Options >Open and
from the following:
R1114_en.book Page 34 Friday, September 16, 2005 9:36 AM
Media applications
35
Most recent clips—to play one of the last six files
played in RealPlayer
Saved clip—to play a file saved in Gallery.
See ‘Gallery’, p. 29.
2Scroll to a file, and press to play the file.
Tip! To view a video clip in full screen mode, press
. Press again to change back to normal screen mode.
Shortcuts during play:
• To fast forward, press and hold .
• To rewind through the media file, press and hold .
• To mute the sound, press and hold until is
displayed. To turn on the sound, press and hold
until you see .
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your device.
Contact your service provider for more information.
Note: In RealPlayer, you can only open an rtsp://
URL address. However, RealPlayer recognizes an http
link to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in your
device.
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 43. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options >Settings and from the following:
Video—to adjust the contrast of the video, and to have
RealPlayer automatically repeat video clips after they
finish playing.
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy settings:
Use proxy—To use a proxy server, select Yes.
R1114_en.book Page 35 Friday, September 16, 2005 9:36 AM
Media applications
36
Proxy serv. address—Enter the IP address of the proxy
server.
Proxy port number—Enter the port number of the proxy
server.
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
Network settings:
Default access point—Scroll to the access point you want
to use to connect to the Internet, and press .
Online time—Set the time for RealPlayer to disconnect
from the network when you pause a media clip playing
through a network link. Select User defined, and press .
Enter the time, and select OK.
Lowest UDP port—Enter the lowest port number of the
server’s port range. The minimum value is 1024.
Highest UDP port—Enter the highest port number of the
server’s port range. The maximum value is 65535.
Select Options >Advanced settings to edit the
bandwidth values for different networks.
Movie Director
To create muvees, press , and select Imaging >Movie.
muvees are short, edited video clips that can contain
video, images, music, and text. Quick muvee is created
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. In a Custom muvee
you can select your own video and music clips, images and
style, and add an opening and closing message. You can
send muvees with MMS.
Open Movie, and press or to move between the
and views. You can also return to the main
view from the view by selecting Done.
The view contains a list of video clips that you can
Play,Send,Rename, and Delete.
Create a quick muvee
1In the Movie director main view, select Quick muvee.
2Select a style for the muvee from the style list. The
created muvee is saved in the Movie director muvee
list. The muvee is played automatically after saving.
R1114_en.book Page 36 Friday, September 16, 2005 9:36 AM
Media applications
37
Create a custom muvee
1In the Movie Director main view, select Custom
muvee.
2Select the clips you want to include in your muvee in
Video,Image,Style, or Music.
After you select video clips and images, to define the
order in which the files are played in the muvee, select
Options >Advanced options. To select the file you
want to move, press . Then scroll to the file below
which you want to place the marked file, and press
.
To cut the video clips, select Options >Select
contents. See ‘Select content’, p. 14.
In Message you can add an opening and closing text
to a muvee.
3Select Create muvee and from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending
Auto-select—to include all the selected pictures and
video clips in the muvee
Same as music—to set the muvee duration to be the
same as the chosen music clip
User defined—to define the length of the muvee
4Select Options >Save.
To preview the custom muvee before saving it, in the
Preview muvee view, select Options >Play.
To create a new custom muvee by using the same style
settings, select Options >Recreate.
Select content
To edit the selected video clips, select Options >Advanced
options >Options >Select contents. You can select
which parts of the video clip you want to include or
exclude in the muvee. In the slider, green is for included,
red is for excluded, and grey is for neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options >Include. To exclude a part,
select Options >Exclude. To exclude a shot, select
Options >Exclude shot.
To let Movie director randomly include or exclude a part
or parts of the video clip, scroll to the part, and select
Options >Mark as neutral or Mark all as neutral.
Settings
Select Settings to edit the following options:
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees.
Default muvee name—Set a default name for the muvees.
R1114_en.book Page 37 Friday, September 16, 2005 9:36 AM
Messaging
38
Messaging
Press , and select Messaging. In Messaging, you can
create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data using Bluetooth connectivity or
infrared, receive Web service messages, cell broadcast
messages, and send service commands.
To create a new message, select New message.
Note: Only devices that have compatible features
can receive and display multimedia messages. The
appearance of a message may vary depending on the
receiving device.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder.
Mailbox—Connect to your remote mailbox to retrieve
your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 19.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last 20 messages that have been sent,
excluding messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 21.
Outbox—Messages waiting to be sent are temporarily
stored here.
Example: Messages are placed in the outbox, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to be
sent the next time you connect to your remote
mailbox.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service). Receiving a
delivery report of a multimedia message that has been
sent to an e-mail address may not be possible.
Tip! When you have opened any of the default
folders, to switch between the folders, press or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
R1114_en.book Page 38 Friday, September 16, 2005 9:36 AM
Messaging
39
services, to your service provider, select Options >
Service command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options >Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
Write text
ABC,abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you are writing text using
traditional text input.
• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To insert a space, press . To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can add new words. is displayed when you write
text using predictive text input.
1To activate predictive text input, press , and select
Predictive text on. This activates predictive text input
for all editors in the device.
2To write the desired word,
press the keys — .
Press each key only once
for one letter. For
example, to write "Nokia"
when the English
dictionary is selected,
press for N, for o,
for k, for i, and
for a.
The word suggestion changes after each keypress.
3When you finish writing the word correctly, press
to confirm it, or press to add a space.
R1114_en.book Page 39 Friday, September 16, 2005 9:36 AM
Messaging
40
If the word is not correct, press repeatedly to view
the matching words the dictionary has found one by
one, or press , and select Predictive text >
Matches.
If the ? character is shown after the word, the word is
not in the dictionary. To add a word to the dictionary,
select Spell, enter the word using traditional text input,
and select OK. The word is added to the dictionary.
When the dictionary is full, a new word replaces the
oldest added word.
4Start writing the next word.
Write compound words
Write the first half of a compound word; to confirm it,
press . Write the last part of the compound word. To
complete the compound word, press to add a space.
Turn predictive text input off
To turn predictive text input off for all editors in the device,
press , and select Predictive text >Off.
Tip! To turn predictive text input on or off, quickly
press twice.
Tips on text input
To insert a number in the letter mode, press and hold the
desired number key.
To switch between the letter and number mode, press and
hold .
To switch between the different character modes, press
.
To delete a character, press . To delete more than one
character, press and hold .
The most common punctuation marks are available under
.
To open a list of special characters, press and hold .
Tip! To insert several special characters at the same
time, press when you select each character.
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘Receive MMS and e-mail settings’, p. 13 and
‘E-mail’, p. 19.
R1114_en.book Page 40 Friday, September 16, 2005 9:36 AM
Messaging
41
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1Select New message and one of the following:
Text message—to send a text message
Multimedia message—to send a multimedia message
(MMS)
E-mail—to send an e-mail
If you have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
2In the To field, press
to select recipients or
groups from contacts, or
enter the recipient’s
phone number or e-mail
address. To add a
semicolon (;) that
separates the recipients,
press . You can also
copy and paste the
number or address from
the clipboard.
3In the Subject field, enter the subject of a multimedia
message or e-mail. To change the fields that are
visible, select Options >Address fields.
4In the message field, write the message. To insert a
template, select Options >Insert or Insert object >
Template.
5To add a media object to a multimedia message, select
Options >Insert object >Image,Sound clip, or Video
clip. When sound is added, is shown.
You cannot send video clips that are saved in the .mp4
format in a multimedia message. To change the format
in which recorded videos are saved, see ‘Video settings’,
p. 25.
6To take a new picture or record sound or video for a
multimedia message, select Insert new >Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options >Preview.
7To add an attachment to an e-mail, select Options >
Insert >Image,Sound clip,Video clip, or Note. E-mail
attachments are indicated by .
Tip! To send other file types as attachments, open
the appropriate application, and select Send >Via
e-mail, if available.
8To send the message, select Options >Send, or press
.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
R1114_en.book Page 41 Friday, September 16, 2005 9:36 AM
Messaging
42
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options like Chinese, take up more space limiting
the number of characters that can be sent in a single
message. In the navigation bar, you can see the message
length indicator counting backwards. For example, 10 (2)
means that you can still add 10 characters for the text to
be sent as two messages.
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options >Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 18.
Receive MMS and e-mail settings
You may receive the settings in a message from your
network operator or service provider. See ‘Data and
settings’, p. 14.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually
1Press , and select Tools >Settings >Connection >
Access points, and define the settings for a
multimedia messaging access point. See ‘Connection
settings’, p. 90.
2Press , and select Messaging >Options >
Settings >Multimedia message >Access point in
use and the access point you created as the preferred
connection. See also ‘Multimedia messages’, p. 18.
Before you can send, receive, retrieve, reply to, and
forward e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection settings’, p. 90.
• Define your e-mail settings correctly. If you select
Mailbox in the Messaging main view and have not set
up your e-mail account, you are prompted to do so. To
start creating the e-mail settings with the mailbox
guide, select Start. See also ‘E-mail’, p. 19.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and Internet
service provider (ISP).
Inbox—receive messages
In the Inbox folder, indicates an unread text
message, an unread multimedia message, data
R1114_en.book Page 42 Friday, September 16, 2005 9:36 AM
Messaging
43
received through infrared, and data received through
Bluetooth connectivity.
When you receive a message, and 1 new message
are shown in the standby mode. to open the message,
select Show. To open a message in Inbox, scroll to it, and
press .
To reply to a received message, select Options >Reply
To print a text or a multimedia message on a compatible
Basic Print Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or HP
Photosmart 8150), select Options >Print.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options >Retrieve.
When you open a multimedia message ( ), you may see
an image and a message. is shown if sound is
included, or if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options >Objects.
If the message includes a multimedia presentation, is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data ( ):
Configuration message—You may receive settings from
your network operator, service provider, or company
information management department in a configuration
message. To save the settings, select Options >Save all.
Business card—To save the information to Contacts, select
Options >Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Operator logo—To have the logo shown in the standby
mode instead of the network operator’s own identification,
select Options >Save.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options >Add to bookmarks. If the
R1114_en.book Page 43 Friday, September 16, 2005 9:36 AM
Messaging
44
message contains both access point settings and
bookmarks, to save the data, select Options >Save all.
E-mail notification—The note tells you how many new
e-mails you have in your remote mailbox. An extended
notification may list more detailed information.
Web service messages
Web service messages ( ) are notifications (for example,
news headlines) and may contain a text message or a link.
For availability and subscription, contact your service
provider.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start creating the
e-mail settings with the mailbox guide, select Start. See
also ‘E-mail’, p. 19.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox, the device asks if you want
to connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection. See also
‘Connection settings’, p. 90.
To view previously retrieved e-mail messages offline,
select No. When you view e-mail messages offline, your
device is not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options >Connect to start a
connection to the remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
1When you have an open connection to a remote
mailbox, select Options >Retrieve e-mail and one of
the following:
New—to retrieve all new e-mail messages
Selected—to retrieve only the e-mail messages that
have been marked
All—to retrieve all messages from the mailbox
R1114_en.book Page 44 Friday, September 16, 2005 9:36 AM
Messaging
45
To stop retrieving messages, select Cancel.
2After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status indicators:
The new e-mail (offline or online mode) has not
been retrieved to your device.
The new e-mail has been retrieved to your device.
The e-mail message has been read, and it has not
been retrieved to your device.
The e-mail message has been read.
The e-mail heading has been read and the
message content has been deleted from the device.
3To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline,
you are asked if you want to retrieve this message
from the mailbox.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve.
You can also receive meeting requests in the mailbox. See
‘Meeting requests’, p. 68, and ‘Create calendar entries’,
p. 68.
To print an e-mail message on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options >Print.
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options >E-
mail settings >Automatic retrieval >Header retrieval >
Always on or Only in home net., and define when and
how often the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options >Delete. In Delete msg. from:, select Phone
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
R1114_en.book Page 45 Friday, September 16, 2005 9:36 AM
Messaging
46
To delete an e-mail from the device and the remote
mailbox, select Options >Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options >Disconnect.
View messages on a SIM card
Before you can view SIM messages, you must copy them to
a folder in your device.
1In the Messaging main view, select Options >SIM
messages.
2Select Options >Mark/Unmark >Mark or Mark all to
mark messages.
3Select Options >Copy. A list of folders opens.
4To start copying, select a folder and OK. To view the
messages, open the folder.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers or access points may be
preset for your device by your service provider or network
operator, and you may not be able to change, create, edit,
or remove them.
Text messages
Press , and select Messaging >Options >Settings >
Text message and from the following:
Message centers—View a list of all text message centers
that have been defined.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Msg. center in use—Select which message center is used
to deliver text messages.
R1114_en.book Page 46 Friday, September 16, 2005 9:36 AM
Messaging
47
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your network operator.
Preferred connection—Select the connection used for
sending text messages: GSM network or packet data, if
supported by the network. See ‘Connection settings’,
p. 90.
Reply via same ctr.—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Multimedia messages
Press , and select Messaging >Options >Settings >
Multimedia message and from the following:
Image size—Define the size of the image in a multimedia
message: Original (shown only when the MMS creation
mode is set to Guided or Free), Small, or Large.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that may not be
supported.
Access point in use—Select which access point is used as
the preferred connection for the multimedia message
center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Aut. in home
network. Outside your home network, you receive a
notification that there is multimedia message that you can
retrieve in the multimedia message center.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrieval >Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Allow anon. messages—Select whether you want to reject
messages from an anonymous sender.
Receive ads—Define whether you want to receive
multimedia message advertisements.
R1114_en.book Page 47 Friday, September 16, 2005 9:36 AM
Messaging
48
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
Deny report sending—Select whether you want to deny
your device sending delivery reports of received
multimedia messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
E-mail
Press , and select Messaging >Options >Settings >
E-mail and from the following:
Mailboxes—Select a mailbox to change the following
settings: Connection settings,User settings,Retrieval
settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use for
sending e-mail.
To create a new mailbox, select Options >New mailbox in
the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an Internet access point (IAP).
See ‘Connection settings’, p. 90.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Select the security option used to
secure the connection to the remote mailbox.
Port—Define a port for the connection.
R1114_en.book Page 48 Friday, September 16, 2005 9:36 AM
Messaging
49
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to
you by your service provider. Replies to your messages are
sent to this address.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your network operator.
Contact your service provider for more information.
Access point in use—Select an Internet access point (IAP).
See ‘Connection settings’, p. 90.
The settings for User name,Password,Security (ports),
and Port are similar to the ones in Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces
your e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to
the mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Send copy to self—Select whether you want to save a
copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address.
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications, a tone and a note, when new
mail is received to the mailbox.
Default encoding—Select another encoding according to
language.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only,Partially (kB),Messages (for
IMAP4 only), or Msgs. & attachs..
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
R1114_en.book Page 49 Friday, September 16, 2005 9:36 AM
Messaging
50
Automatic retrieval
E-mail notifications—Select whether you want to receive
notifications when new e-mail is received in your remote
mailbox.
E-mail notifications and automatic header retrieval cannot
be active at the same time.
Header retrieval—Select whether you want the device to
retrieve new e-mail automatically. You can define when,
and how often, the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Web service messages
Press , and select Messaging >Options >Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages >Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press , and select Messaging >
Options >Settings >Cell broadcast and from the
following:
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All,Selected, or Other.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Other settings
Press , and select Messaging >Options >Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or e-
mail that you send to the Sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message
is deleted.
Memory in use—If a memory card is inserted in the
device, select the memory where you want to save your
messages: Phone memory or Memory card.
R1114_en.book Page 50 Friday, September 16, 2005 9:36 AM
Make calls
51
Make calls
Voice calls
Tip! To increase or decrease the volume during a call,
press or . If you have set the volume to Mute,
you cannot adjust the volume with the or keys.
To adjust the volume, select Unmute, and then press or
.
1In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2Press to call the number.
3Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another
application is active. To end a call if the cover is open, close
the cover.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press . Select the call type Voice call.
You must copy the contacts from your SIM to Contacts
before you can make a call this way. See ‘Copy contacts’,
p. 62.
To call your voice mailbox (network service), press and
hold in the standby mode. See also ‘Call diverting’, p.
96.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
To call a recently dialled number in the standby mode,
press . Scroll to the number you want, and press
to call the number.
Make a conference call
1Make a call to the first participant.
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
R1114_en.book Page 51 Friday, September 16, 2005 9:36 AM
Make calls
52
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The
conference call is put on hold on your device. The other
participants can still continue the conference call.
Once you have finished the private conversation,
select Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press .
Speed dial a phone number
To activate speed dialing, press , and select Tools >
Settings > Call > Speed dialing > On.
To assign a phone number to one of the speed dialing keys
( — ), press , and select Tools > Speed dial. Scroll
to the key to which you want to assign the phone number,
and select Options > Assign. is reserved for the voice
mailbox.
To call in the standby mode, press the speed dial key and
.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1To start voice dialing, press and hold the voice key. If
you are using a compatible headset with the headset
key, press and hold the headset key to start voice
dialing.
R1114_en.book Page 52 Friday, September 16, 2005 9:36 AM
Make calls
53
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile,Mobile (home),Mobile (business),
Telephone,Tel. (home), and Tel. (business).
Video calls
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or video image captured by the
camera in your device is shown to the video call recipient.
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
network operator or service provider. A video call can only
be made between two parties. The video call can be made
to a compatible mobile phone or an ISDN client. Video
calls cannot be made while there is another voice, video,
or data call active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call settings’, p. 89.
1To start a video call, open
the cover, enter the phone
number in the standby
mode, or select Contacts,
and select a contact.
2Select Options > Call >
Video call.
3Activate the Imaging mode
after the call recipient has
answered the call.
Starting a video call may take a while. Waiting for image
is shown. If the call is not successful (for example, video
calls are not supported by the network, or the receiving
device is not compatible) you are asked if you want to try
a normal call or send a message instead.
The video call is active when you see two video images,
and hear the sound through the loudspeaker. The call
recipient may deny video sending ( ), in which case you
R1114_en.book Page 53 Friday, September 16, 2005 9:36 AM
Make calls
54
hear the sound and may see a still image or a grey
background graphic.
Tip! To increase or decrease the volume during a call,
scroll left or right.
To change between showing video or hearing only sound,
select Enable/Disable > Sending video,Sending audio or
Sending audio & video.
To send live video image of yourself, select Use front
camera to switch on the front camera. To show the other
party the view visible from the back camera, select Use
back camera.
Tip! Open or close the cover to switch between the
front and back cameras. IS THIS TRUE?
To zoom your own image, select Zoom in or Zoom out.
The zoom indicator is shown on the top of the display.
To switch the places of the sent video images on the
display, select Change image order.
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
To end the video call, press .
Video sharing (network service)
Use Video sharing to send live video or a video clip from
your mobile device to another compatible mobile device
during a voice call. Simply invite a recipient to view the live
video, or a video clip you want to share. Sharing begins
automatically when the recipient accepts the invitation,
and you activate the correct mode. See ‘Share video’, p. 13.
Video sharing requirements
Because Video sharing requires a 3G Universal Mobile
Telecommunications System (UMTS) connection, your
ability to use Video sharing depends on 3G network
availability. Contact your service provider for questions
about network availability and fees associated with using
this application. To use Video sharing you must:
• Ensure that Video sharing is installed on your Nokia
NXX.
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p.13.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 13. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues.
R1114_en.book Page 54 Friday, September 16, 2005 9:36 AM
Make calls
55
• Ensure that both the sender and recipient are
registered to the UTMS network. If you invite someone
to a sharing session and that person has his phone
turned off, or the person is not within UMTS network
coverage, they do not know that you are sending an
invitation. However, you receive an error message that
the recipient cannot accept the invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible phone. The SIP profile must also be established
to receive a sharing session.
Ask your network operator or service provider for the SIP
profile settings, and save them in your device. Your
network operator or service provider may send you the
settings over the air.
If you know a recipient’s SIP address, you can enter it on
your contact card for that person. Open Contacts from
your device main menu, and open the contact card (or start
a new card for that person). Select Options >Add detail >
Web address. Enter the SIP address in a format
sip:username@domainname (you can use an IP address
instead of a domain name).
UTMS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection settings’, p. 90.
Share video
To receive a sharing session, the recipient must install
Video sharing and configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Live video
1When a voice call is active, select Options > Share
video > Live.
2The phone sends the invitation to the SIP address you
have added to the contact card of the recipient.
R1114_en.book Page 55 Friday, September 16, 2005 9:36 AM
Make calls
56
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available,
enter a SIP address. Select OK to send the invitation.
3Sharing begins automatically when the recipient
accepts the invitation.
The loudspeaker is active. You can also use a headset
to continue your voice call while you share live video.
4Select Pause to pause the sharing session. Select
Continue to resume sharing.
5To end the sharing session, select Stop. To end the
voice call, press the End key.
Video clip
1When a voice call is active, select Options > Share
video > Clip.
A list of video clips opens.
2Select a video clip you want to share. A preview view
opens. To preview the clip, select Options > Play.
3Select Options > Invite.
You may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? appears. Select OK.
The phone sends the invitation to the SIP address you
have added to the contact card of the recipient.
In case the recipient has several SIP addresses in the
contact card, select the SIP address to which you want
to send the invitation, and Select to send the
invitation.
If the SIP address of the recipient is not available, enter
a SIP address. Select OK to send the invitation.
4Sharing begins automatically when the recipient
accepts the invitation HOW DOES THIS WORK NOW? .
5Select Pause to pause the sharing session. Select
Options > Continue to resume sharing.
6To end the sharing session, select Stop. To end the voice
call, press the End key.
Accept an invitation
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
If someone sends you a share invitation and you are not
within UMTS network coverage, you will not know that
you received an invitation.
When you receive an invitation, you can select:
•Accept to begin the sharing session. If the sender
wants to share live video, activate the Imaging mode.
•Reject to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press the End key to decline the sharing session and
disconnect the voice call.
R1114_en.book Page 56 Friday, September 16, 2005 9:36 AM
Make calls
57
To end the sharing session, select Stop. If you share a video
clip, select Exit.Sharing ended is displayed.
Answer or reject a call
To answer the call if the cover is open, press . If the
cover is closed, open the cover, and the call will be
answered automatically.
To mute the ringing tone when a call comes in, select
Silence. If the cover is closed, press the cover key to select
Silence.
Tip! If a compatible headset is connected to the
device, to answer and end a call, press the headset key.
If the cover is open, and you do not want to answer a call,
press or close the cover to reject it. If the cover is
closed, press the cover key once to silence the ringing, and
again to reject the call. The caller hears a line busy tone.
If you have activated the Call divert settings > If busy
function to divert calls, rejecting an incoming call also
diverts the call. See ‘Call diverting’, p. 96.
When you reject an incoming call, you can also send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can edit
the text before sending it. To set up this option and write
a standard text message, see ‘Call settings’, p. 89.
If you answer a voice call during a video call, the video call
is dropped. Call waiting is not available during a video
call.
Answer or reject a video call
When a video call arrives, you can see .
1Press to answer the video call. Allow video image
to be sent to caller? is shown.
If you select Yes, the image being captured by the
camera in your phone is shown to the caller. If you
select No, or do nothing, video sending is not
activated, and you hear a sound. A grey screen is
shown in place of the video. To replace this grey screen
with a still image, see ‘Call settings’, Image in video
call, p. 89.
2To end the video call, press .
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
R1114_en.book Page 57 Friday, September 16, 2005 9:36 AM
Make calls
58
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—set tones’, p. 85.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer . To end the active call, press . To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for
some of the following options: Mute or Unmute,Answer,
Reject,Swap,Hold or Unhold,Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls,New call,Conference, and
Transfer. Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device (network service).
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Tip! If you select Activate loudsp., you can close the
cover and continue the call.
Tip! To switch the microphone of or on when the
cover is closed, press the cover key to select to Mute or
Unmute.
Options during a video call
Select Options during a video call for the following
options: Enable or Disable WHAT ARE THE AUDIO’VIDEO
’OPTIONS’? GROMIT SAYS :(audio in the Fold open mode;
video, audio, or both in the Imaging mode), Activate
handset (if a headset with Bluetooth connectivity is
attached), Activate loudsp., or Activate handsfree HOW
DOES THIS WORK NOW? (Fold open mode only, and if a
headset with Bluetooth connectivity is attached), End
active call,Change image order,Zoom in/Zoom out
(Imaging mode only), and Help.
R1114_en.book Page 58 Friday, September 16, 2005 9:36 AM
Make calls
59
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialled calls, press , and select My own > Log > Recent
calls. The device registers missed and received calls only if
the network supports these functions, the device is
switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and press
.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log > Call
duration.
To set the display of the call duration while a call is active,
select Connect. > Log > Options > Settings > Show call
duration. Select Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code, see ‘Security’,
‘Phone and SIM’, p. 93.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
R1114_en.book Page 59 Friday, September 16, 2005 9:36 AM
Make calls
60
To monitor all voice and video
calls, text messages, or data
connections registered by the
device, press , select My
own > Log, and press the scroll
key to the right to open the
general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the general log to view just one type
of event and create new contact cards based on the log
information.
Tip! To see the duration of a voice call on the main
display during an active call, select Options > Settings
>Show call duration > Yes.
Tip! To view a list of sent messages, press , and
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options>
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the phone memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press the scroll key.
Tip! In the details view you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
R1114_en.book Page 60 Friday, September 16, 2005 9:36 AM
Contacts (Phonebook)
61
Contacts (Phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 43.
Contact information can only be sent to or received from
compatible devices.
Save names and numbers
1Select Options >New contact.
2Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options >Edit.
Tip! To print contact cards on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press to
delete.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options >Edit >Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Tip! 1-touch dialing is a quick way to call frequently
used numbers. You can assign 1-touch dialing keys to
eight phone numbers. See ‘Speed dial a phone number’,
p. 52.
Tip! To send contact information, select the card you
want to send. Select Options >Send >Via text
message,Via multimedia,Via Bluetooth, or Via
infrared. See ‘Messaging’, p. 38 and ‘Send data using
Bluetooth connectivity’, p. 78.
To add a contact to a group, select Options >Add to
group (shown only if you have created a group). See
‘Create contact groups’, p. 11.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options >Memory details.
R1114_en.book Page 61 Friday, September 16, 2005 9:36 AM
Contacts (Phonebook)
62
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1In the address book, select a contact, and press .
2Select Options >Defaults.
3Select a default to which you want to add a number or
an address, and select Assign.
4Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press , and select Contacts >Options >SIM
contacts >SIM directory. Select the names you want to
copy and Options >Copy to Contacts.
To copy contacts to your SIM card, press , and select
Contacts. Select the names you want to copy and
Options >Copy to SIM direct., or Options >Copy >To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and other SIM services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Press , and select Contacts >Options >SIM
contacts >SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts >Fixed dialing contacts. This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options >Activ. fixed dialing. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed dialing, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
R1114_en.book Page 62 Friday, September 16, 2005 9:36 AM
Contacts (Phonebook)
63
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
1Press to open a contact card or go to the groups list,
and select a contact group.
2Select Options >Ringing tone. A list of ringing tones
opens.
3Select the ringing tone you want to use for the
individual contact or the selected group.
???You can also use a video clip as a ringing tone.???
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1In Contacts, press to open the groups list.
2Select Options >New group.
3Write a name for the group or use the default name
Group %N, and select OK.
4Open the group, and select Options >Add members.
5Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options >Rename, enter the
new name, and select OK.
Remove members from a group
1In the groups list, open the group you want to modify.
2Scroll to the contact, and select Options >Remove
from group.
3Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options >Belongs to
groups.
R1114_en.book Page 63 Friday, September 16, 2005 9:36 AM
Web
64
Web
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
Press , and select Web.
Shortcut: To start a connection, press and hold
in the standby mode.
Web access point
To access pages, you need Web service settings for the
page that you want to use. You may receive the settings in
a special text message from the network operator or
service provider that offers the Web page. See ‘Data and
settings’, p. 43. For more information, contact your
network operator or service provider.
Tip! Settings may be available on the Web site of a
network operator or service provider.
Enter settings manually
1Press , select Tools >Settings >Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection settings’, p. 90.
2Press , and select Web >Options >Bookmark
manager >Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
3To set the created access point as the default access
point, select Options >Settings >Access point.
Bookmarks view
The bookmarks view opens when you open Web.
Your device may have some bookmarks loaded for sites not
affiliated with Nokia. Nokia does not warrant or endorse
these sites. If you choose to access them, you should take
the same precautions, for security or content, as you
would with any Internet site.
indicates the starting page defined for the default
access point.
R1114_en.book Page 64 Friday, September 16, 2005 9:36 AM
Web
65
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options >Details >Security to view details about
the connection, encryption status, and information about
server and user authentication.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certif. management’, p. 94.
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To download a page, select a bookmark, or enter the
address in the field ( ).
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
To open links and make selections, press .
Shortcut: Use to jump to the end of a page and
to the beginning of a page.
To go to the previous page while browsing, select Back. If
Back is not available, select Options >Navigation
options >History to view a chronological list of the pages
you visited during a browsing session.
To retrieve the latest content from the server, select
Options >Navigation options >Reload.
To save a bookmark, select Options >Save as bookmark.
Tip! To access the bookmarks view while browsing,
press and hold . To return to the browser view, select
Options >Back to page.
To save a page while browsing, select Options >Advanced
options >Save page. You can save pages to the device
memory or memory card (if inserted), and browse them
when offline. To access the pages later, press in the
bookmarks view to open the Saved pages view.
To enter a new URL address, select Options >Navigation
options >Go to web address.
R1114_en.book Page 65 Friday, September 16, 2005 9:36 AM
Web
66
To open a sublist of commands or actions for the currently
open page, select Options >Service options.
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press .
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session is
displayed. You can also view the list by selecting Options >
Tools >Downloads. In the list, scroll to an item, and select
Options to pause, resume, or cancel ongoing downloads, or
open, save, or delete completed downloads.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
1To download the item, scroll to the link, and press .
2Select the appropriate option to purchase the item, for
example, “Buy”.
3Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
End a connection
To end the connection and view the browser page offline,
select Options >Advanced options >Disconnect, or to
end the connection and close the browser, select
Options >Exit.
Empty the cache
The information or services you have accessed are stored
in the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
R1114_en.book Page 66 Friday, September 16, 2005 9:36 AM
Web
67
accessed are stored in the cache. To empty the cache,
select Options >Advanced options >Clear cache.
Web settings
Select Options >Settings and from the following:
Access point—Change the default access point. See
‘Connection settings’, p. 90. Some or all access points may
be preset for your device by your service provider or
network operator, and you may not be able to change,
create, edit, or remove them.
Show images and objects—Select whether you want to
load images while browsing. If you select No, to load
images later during browsing, select Options >Show
images.
Font size—Select the text size.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Automatic bookmarks—Enable or disable automatic
bookmark collecting. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Screen size—Select what is shown when you are
browsing: Select. keys only or Full screen.
Homepage—Define the home page.
Search page—Define a Web page that is downloaded
when you select Navigation options >Open search page
in the bookmarks view, or when browsing.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—Enable or disable the receiving and sending of
cookies.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Confirm touch tones—Select whether you want to
confirm before the device sends touch tones during a voice
call. See also ‘Options during a voice call’, p. 58.
R1114_en.book Page 67 Friday, September 16, 2005 9:36 AM
Calendar
68
Calendar
Use Calendar to remind you of meetings, anniversaries,
and to keep track of your tasks and other notes.
Create calendar entries
Shortcut: In the day, week, or month calendar view,
press any key ( — ). An appointment entry opens,
and the characters you enter are added to the Subject
field. In the to-do view, a to-do note entry opens.
1Press , and select
Calendar >Options >
New entry and one of the
following:
Appointment—to remind
you of an appointment
that has a specific date
and time
Meeting request—to
send a meeting request by
e-mail (a mailbox must be
defined in the device)
Memo—to write a general entry for a day
Anniversary—to remind you of birthdays or special
dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
2Fill in the fields. To set an alarm, select Alarm >On,
and enter the Alarm time and Alarm date.
To add a description for an appointment or a meeting,
select Options >Add description.
3To save the entry, select Done.
When the calendar alarms for a note, select Silence to
turn off the calendar alarm tone. The reminder text stays
on the screen. To end the calendar alarm, select Stop. To
set the alarm to snooze, select Snooze.
Tip! You can synchronize your calendar with a
compatible PC using Nokia PC Suite. When creating a
calendar entry, set the desired Synchronization
option.
Meeting requests
If you receive a meeting request to the mailbox in your
device, the request is saved to the calendar when you open
the e-mail.
R1114_en.book Page 68 Friday, September 16, 2005 9:36 AM
Calendar
69
You can view received meeting requests in the mailbox or
in the calendar. To respond to a meeting request via
e-mail, select Options >Respond
Calendar views
Tip! Select Options >Settings to change the
starting day of the week or the view that is shown
when you open the calendar.
In the month view, dates that have calendar entries are
marked with a small triangle in the right bottom corner.
In the week view, memos and anniversaries are placed
before 8 a.m. To switch between the month view, week
view, day view, and to-do view, press .
To go to a certain date, select Options >Go to date. To
jump to today, press .
To send a calendar note to a compatible device, select
Options >Send.
To print calendar entries on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options >Print.
Manage your calendar entries
Deleting past entries in Calendar saves space in your
device memory.
To delete more than one event at a time, go to the month
view, and select Options >Delete entry >Before date or
All entries.
To mark a task as completed, scroll to it in the to-do view,
and select Options >Mark as done.
Calendar settings
To modify the Calendar alarm tone,Default view,Week
starts on, and Week view title, and Default mailbox ,
select Options >Settings.
R1114_en.book Page 69 Friday, September 16, 2005 9:36 AM
My own
70
My own
Visual Radio
You can use the Visual RadioTM application as a traditional
FM radio with automatic tuning and saved stations, and, if
you tune to stations that offer Visual Radio service, you
can view visual information on the display related to the
radio program. The Visual Radio service uses packet data
(network service). You can listen to the FM radio while
using other applications.
To use the Visual Radio service, the following conditions
are required:
• The device must be switched on.
• The device must have a valid SIM card inserted.
• The station you listen to and the network operator you
use must support this service.
• An Internet access point must be defined to access the
operator’s visual radio server.
• The station must have the correct Visual Radio service
ID defined and Visual Radio service enabled. See ‘Saved
stations’, p. 11.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio. The Visual Radio service may not be available
in all areas and countries.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
You can listen to the radio with the built-in loudspeaker
or a compatible headset. When using the loudspeaker,
keep the headset plugged in the device. The lead of the
headset functions as the antenna of the radio, so let it
hang freely.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is turned off when
there is an active call. When the call is finished, you may
need to turn the radio back on manually.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select
R1114_en.book Page 70 Friday, September 16, 2005 9:36 AM
My own
71
the region you are located in, or you can select the region
in the Visual radio settings.
Visual Radio can be used for listening when the device
cover is closed. Channel information may be displayed on
the cover display To mute or unmute the radio, press the
cover key.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press , and select Radio.
To start a station search, select or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
If you have previously saved
radio stations, select or
to go to the next or
previous saved station, or
select the memory location
of a station by pressing the
corresponding number key.
ED: REQUEST NEW GRAPHIC
To adjust the volume, press
or . To listen to the
radio using the loudspeaker,
select Options >Activate loudsp..
To view available stations based on location, select
Options >Station directory (network service).
To save the current tuned station to your station list, select
Options > Save station. To open the list of your saved
stations, select Options >Stations. See ‘Saved stations’, p.
11.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
Add graphic and icons
in text to show the on-
screen buttons
R1114_en.book Page 71 Friday, September 16, 2005 9:36 AM
My own
72
To view available visual content for a tuned station, select
or Options > Station > Start visual service. If the
visual service ID has not been saved for the station, enter
it, or select Retrieve to search for it in the station directory
(network service)...
When the connection to the visual service is established,
the display shows the current visual content designed by
the content provider.
To adjust display settings for the visual content view,
select Options >Display settings >Lighting or Screen
saver timeout.
Saved stations
You can save up to 20 radio stations in Visual Radio. To
open your station list, select Options >Stations.
To listen to a saved station, select Options >Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options >Station >Start
visual service.
To change station details, select Options >Station >Edit.
Settings
Select Options >Settings and from the following:
Start-up tone—Select if a tone is played when the
application is started.
Auto-start service—Select Yes to have the Visual Radio
service start automatically when you select a saved
station that offers visual service.
Access point—Select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Current region—Select the region you are currently
located in. This setting is displayed only if there was no
network coverage when the application was started.
Go to—add shortcuts
Press , and select My own >Go to. Default shortcuts
are the following: opens Calendar, opens Inbox,
and opens Notes.
IM—instant messaging
Press , and select My own >IM.
Instant messaging (network service) allows you to
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you can
R1114_en.book Page 72 Friday, September 16, 2005 9:36 AM
My own
73
log in to after you register to an IM service. Service
providers may differ in their support of features.
Select Conversations to start or continue a conversation
with an IM user; IM contacts to create, edit, or view the
online status of your IM contacts; IM groups to start or
continue a group conversation with multiple IM users; or
Recorded chats to view a previous instant messaging
session that you saved.
Check the availability of services, pricing, instructions,
and fees with your network operator or service provider.
Receive IM settings
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See ‘Data and settings’, p. 43.
You can also enter the settings manually. See ‘Chat server
settings’, p. 14.
Connect to an IM server
1To connect to the IM server in use, open IM, and select
Options >Login. To change the IM server in use and
save new IM servers, see ‘Chat server settings’, p. 14.
2Enter your user ID and password, and press to log
in. You obtain the user ID and password for the IM
server from your service provider.
3To log out, select Options >Logout.
Modify your IM settings
Select Options >Settings >IM settings and from the
following:
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname, select Yes.
IM presence—To allow others to see if you are online,
select Active for all.
Allow messages from—To allow messages from all, select
All.
Allow invitations from—To allow invitations only from
your IM contacts, select IM contacts only. IM invitations
are sent by IM contacts who want you to join their groups.
Msg. scrolling speed—Select the speed at which new
messages are displayed.
Sort IM contacts—Select how your IM contacts are
sorted: Alphabetically or By online status.
Availability reloading—To select how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Offline contacts—Select whether IM contacts with an
offline status are shown in the IM contacts list.
R1114_en.book Page 73 Friday, September 16, 2005 9:36 AM
My own
74
Search for IM groups and users
To search for groups, in the IM groups view, select
Options >Search. You can search by Group name,Topic,
and Members (user ID).
To search for users, in the IM contacts view, select
Options >New IM contact >Search from server. You
can search by User's name,User ID,Phone number, and
E-mail address.
Join IM groups
The IM groups view shows a list of the IM groups that you
have saved or are currently joined to.
To join a saved IM group, press .
To join an IM group that is not on the list, but for which
you know the group ID, select Options >Join new group.
To leave the IM group, select Options >Leave IM group.
Chat
After you join an IM group, you can view the messages that
are exchanged there, and send your own messages.
To send a message, write the message in the message
editor field, and press .
To send a private message to a participant, select
Options >Send private msg..
To reply to a private message sent to you, select the
message and Options >Reply.
To invite IM contacts who are online to join the IM group,
select Options >Send invitation.
To prevent receiving messages from certain participants,
select Options >Blocking options and the desired option.
Record chats
To record the messages that are exchanged during a
conversation or while you are joined in a IM group, select
Options >Record chat. To stop recording, select
Options >Stop recording. To view the recorded chats, in
the main view, select Recorded chats.
View and start conversations
The Conversations view shows a list of the individual
conversation participants that you have an ongoing
conversation with. Ongoing conversations are
automatically closed when you exit IM.
To view a conversation, scroll to a participant, and press
.
To continue the conversation, write your message, and
press .
R1114_en.book Page 74 Friday, September 16, 2005 9:36 AM
My own
75
To return to the conversations list without closing the
conversation, select Back. To close the conversation,
select Options >End conversation.
To start a new conversation, select Options >New
conversation.
To save a conversation participant to your IM contacts,
select Options >Add to IM contacts.
To send automatic replies to incoming messages, select
Options >Set auto reply on. You can still receive
messages.
IM contacts
In the IM contacts view, you can retrieve chat contact
lists from the server, or add a new chat contact to a
contact list. When you log in to the server, the previously
used chat contact list is retrieved from the server
automatically.
Chat server settings
Select Options >Settings >Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
Servers—View a list of all defined IM servers.
Default server—Change the IM server to which you want
to connect.
IM login type—To log in automatically when you start IM,
select On app. start-up.
To add a new server to your list of IM servers, select
Servers >Options >New server. Enter the following
settings:
Server name—the name for the chat server
Access point in use—the access point you want to use for
the server
Web address—the URL address of the IM server
User ID—your user ID
Password—your login password
Games
Press , and select My own and a game. For instructions
on how to play the game, select Options > Help.
R1114_en.book Page 75 Friday, September 16, 2005 9:36 AM
Connectivity
76
Connectivity
Bluetooth connectivity
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
connectivity to send images, video clips, music and sound
clips, and notes; connect wirelessly to your compatible PC
(for example, to transfer files); connect to a compatible
printer to print images with Image print. See ‘Image print’,
p. 33.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
need to be within 10 meters (33 feet) of each other, but the
connection may be subject to interference from
obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imaging Profile, SIM Access profile,
and Human Interface Device Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the Handsfree Profile is used between the
handsfree device and the phone. For devices to be
compatible, they must support the same profiles.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 93 for more information on
locking the device.
R1114_en.book Page 76 Friday, September 16, 2005 9:36 AM
Connectivity
77
Settings
Press , and select Connect. >Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth
connectivity On, then establish a connection.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth technology, select Shown
to all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be
paired and the pairing initiated from the other device.
When pairing, use a 16-digit passcode, and set the other
device as authorized. See ‘Pair devices’, p. 11. Activate the
remote SIM mode from the other device.
When remote SIM mode is on in your Nokia XX, #Remote
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by in
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except make
calls to certain emergency numbers, or use other
features that require network coverage. To make calls,
you must first leave the remote SIM mode. If the device
has been locked, enter the lock code.
To leave the remote SIM mode, press the power key, and
select Exit rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth >Off or My phone's visibility >Hidden.
Do not pair with an unknown device.
R1114_en.book Page 77 Friday, September 16, 2005 9:36 AM
Connectivity
78
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options >Send >Via
Bluetooth.
1Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2Select the item and Options >Send >Via Bluetooth.
Devices with Bluetooth technology within range start
to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 11.
5When the connection has been established, Sending
data is shown.
The Sent folder in Messaging does not store messages
sent using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options >New paired
device. Devices with wireless Bluetooth technology within
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
on the other device as well. After pairing, the device is
saved to the paired devices view.
R1114_en.book Page 78 Friday, September 16, 2005 9:36 AM
Connectivity
79
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorized—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust. indicates authorized devices in the paired
devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options >Delete. If you want to cancel all pairings, select
Options >Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See ‘Inbox—receive messages’, p. 42.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Infrared connection
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Do not point the IR (infrared) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
Send and receive data using infrared
1Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to 1
meter (3 feet).
2The user of the receiving device activates the infrared
port.
R1114_en.book Page 79 Friday, September 16, 2005 9:36 AM
Connectivity
80
To activate the infrared port of your device to receive
data through infrared, press , and select Connect. >
Infrared.
3The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
an application or the file manager, and select
Options >Send >Via infrared.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
All items received through infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated
by .
When blinks, your device is trying to connect to the
other device or a connection has been lost.
When is shown continuously, the infrared
connection is active, and your device is ready to send and
receive data using its infrared port.
Data cable
Press , and select Connect. >Data cable. In Data cable
mode, select what the USB data cable connection is used
for: PC Suite or Data transfer. To have the device ask the
purpose of the connection each time the cable is
connected, select Ask on connection.
PC connections
You can use your device with a variety of PC connectivity
and data communications applications. With Nokia PC
Suite you can, for example, transfer images between your
device and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
Your device as a modem
You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using Bluetooth connectivity, infrared, or a USB data
cable. Detailed installation instructions can be found in
the User Guide for Nokia PC Suite.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
R1114_en.book Page 80 Friday, September 16, 2005 9:36 AM
Connectivity
81
Connection manager
Press , and select Connect. >Conn. mgr.. To view the
status of data connections or end connections in GSM and
UMTS network, select Active data connections.
Data connections
In the active connections view, you can see the open data
connections: data calls ( ) and packet data connections
( and ).
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options >Disconnect. To
close all open connections, select Options >Disconnect
all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Synchronization
Press , and select Connect. >Sync.Sync enables you
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the Internet.
You can also create or edit synchronization settings.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 43.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
1Select a synchronization profile and Options >
Synchronize. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2You are notified when the synchronization is complete.
Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
R1114_en.book Page 81 Friday, September 16, 2005 9:36 AM
Connectivity
82
Device manager
Press , and select Connect. >Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select Options >Enable config. or
Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
R1114_en.book Page 82 Friday, September 16, 2005 9:36 AM
Office
83
Office
Calculator
To add, substract, multiply, divide, and calculate square
roots and percentages, press , and select Office >
Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Converter
To convert measures from one unit to another, press ,
and select Office >Converter.
Converter has limited accuracy, and rounding errors may
occur.
1In the Type field, select the measure you want to use.
2In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
3In the first Amount field, enter the value you want to
convert. The other Amount field changes automatically
to show the converted value.
Set base currency and exchange rates
Select Type >Currency >Options >Currency rates.
Before you can make currency conversions, you must
select a base currency and add exchange rates. The rate of
the base currency is always 1.
Note: When you change base currency, you must
enter the new rates because all previously set
exchange rates are set to zero.
Notes
To write notes, press , and select Office >Notes. You
can send notes to compatible devices, and save plain text
files (.txt format) that you receive to Notes.
To print a note on a compatible Basic Print Profile (BPP)
equipped printer with Bluetooth connectivity (such as HP
Deskjet 450 Mobile Printer or HP Photosmart 8150), select
Options >Print.
R1114_en.book Page 83 Friday, September 16, 2005 9:36 AM
Office
84
Recorder
To record voice memos, press , and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone
every 5 seconds during recording.
R1114_en.book Page 84 Friday, September 16, 2005 9:36 AM
Personalize your device
85
Personalize your device
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured for your network
provider. This configuration may include changes in menu
names, menu order and icons. Contact your service
provider for more information.
The open applications, and folders that have applications
open, are indicated by a small icon (ICON) in the main
menu.
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 11.
• To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 10.
• To customize the ringing
tones, see ‘Profiles—set
tones’, p. 9 and ‘Add
ringing tones for
contacts’, p. 63.
• To change the shortcuts assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 89.
• To change the clock shown in the standby mode, press
, and select Clock >Options >Settings >Clock
type >Analog or Digital.
• To change the welcome note to an image or animation,
press , and select Tools >Settings >Phone >
General >Welcome note or logo.
• To change the main menu view, in the main menu,
select Options >View >Grid or List.
• To rearrange the main menu, in the main menu, select
Options >Move,Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools >Profiles.
R1114_en.book Page 85 Friday, September 16, 2005 9:36 AM
Personalize your device
86
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools >Profiles.
Scroll to the profile, and select Options >Customize.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
If you want the caller’s name to be said when your device
rings, select Options >Customize, and set Say caller’s
name to On. The caller’s name must be saved in Contacts.
To create a new profile, select Options >Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by in the signal
strength indicator area. All wireless phone signals to and
from the device are prevented. If you try to send
messages, they are placed in the outbox to be sent later.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
leaving the Offline profile. See ‘Settings’, p. 77.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools >Themes. The active
theme is indicated by . In Themes you can group
together elements from other themes or select images
from the Gallery to personalize themes further. The
R1114_en.book Page 86 Friday, September 16, 2005 9:36 AM
Personalize your device
87
themes on the memory card (if inserted) are indicated by
. The themes on the memory card are not available if
the memory card is not inserted in the device. If you want
to use the themes saved in the memory card without the
memory card, save the themes in the device memory first.
To open a browser connection and download more themes,
select Theme downloads.
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options >Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings.
To restore the selected theme to its original settings, select
Options >Restore orig. theme when you edit a theme.
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
Press , select Tools >Settings >Phone >Standby
mode >Active standby, and press to switch the active
standby on or off.
The active standby display is
shown with default
applications across the top of
the screen, and calendar,
to-do, and player events
listed below.
Scroll to an application or
event, and press .
The standard scroll key
shortcuts available in the
standby mode cannot be
used when the active standby mode is on.
To change the default applications shortcuts, press ,
select Tools >Settings >Phone >Standby mode >Active
standby apps., and press .
Some shortcuts may be fixed, and you are not able to
change them.
R1114_en.book Page 87 Friday, September 16, 2005 9:36 AM
Tools
88
Tools
ICON- Media key
To open the shortcut assigned to the multimedia key, press
and hold . To open a list of multimedia applications,
press . To open the desired application, use the scroll
key. To exit the list without selecting an application, press
and hold .
To change the shortcuts, press , and scroll down. To
change the default shortcut, select Multimedia key. To
change the applications that are shown when you press
, select Top,Left,Middle, and Right and the
application.
Some shortcuts may be fixed, and you are not able to
change them.
Settings
To change settings, press , and select Tools >Settings.
To open a settings group, press . Scroll to a setting you
want to change, and press .
Some settings may be preset for the device by your
network operator or service provider, and you may not be
able to change them.
Phone settings
General
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
R1114_en.book Page 88 Friday, September 16, 2005 9:36 AM
Tools
89
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 15. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 87.
Left selection key—Assign a shortcut to the left selection
key ( ) in the standby mode.
Right selection key—Assign a shortcut to the right
selection key ( ) in the standby mode.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Brightness—Adjust the basic brightness level of the display
to lighter or darker. However, in extreme light conditions,
the brightness of the display is automatically adjusted.
Pwr. saver time-out—Select the time-out period after
which the ?screen saver is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Power saver LED—Select whether the display is switched
off to save battery power 20 minutes after the ?screen
saver is activated. When the display is switched off, a LED
blinks to indicate that the device is powered on.
Call settings
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by network) (network service).
R1114_en.book Page 89 Friday, September 16, 2005 9:36 AM
Tools
90
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 57.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
1-touch dialing—Select On, and the numbers assigned to
the 1-touch dialing keys ( - ) can be dialled by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 52.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and .
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection settings
Data connections and access points
Your device supports packet data connections, such as
GPRS in the GSM network. When you use your device in
GSM and UMTS networks, multiple data connections can
be active at the same time, and access points can share a
data connection.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
R1114_en.book Page 90 Friday, September 16, 2005 9:36 AM
Tools
91
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Access points
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 43. Some or
all access points may be preset for your device by your
service provider or network operator, and you may not be
able to change, create, edit, or remove them. indicates
a protected access point.
indicates a packet data access point.
To create a new access point, select Options >New
access point. To edit the settings of an access point,
select Options >Edit. Follow the instructions from your
service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your network operator or service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
R1114_en.book Page 91 Friday, September 16, 2005 9:36 AM
Tools
92
Select Options >Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary name server:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings:Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—enter the IP
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings >DNS address—Select Automatic,Well-
known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
R1114_en.book Page 92 Friday, September 16, 2005 9:36 AM
Tools
93
the settings may be stored on your (U)SIM card. You can
save these settings to your device, view, or delete them in
Configurations.
Date and time
See ‘Clock settings’, p. 12, and language settings in
‘General’, p. 9.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See ‘Glossary of PIN
and lock codes’, p. 15.
PIN code,PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of
these codes, contact your service provider. See ‘Glossary
of PIN and lock codes’, p. 15.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
R1114_en.book Page 93 Friday, September 16, 2005 9:36 AM
Tools
94
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certif. management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
R1114_en.book Page 94 Friday, September 16, 2005 9:36 AM
Tools
95
even if the certificate should be valid, check that the
current date and time in your device are correct.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options >Certificate details. When you open
certificate details, the validity of the certificate is
checked, and one of the following notes may be displayed:
•Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the
trust settings’, p. 16.
•Expired certificate—The period of validity has ended
for the selected certificate.
•Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
•Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
•Symbian installation:Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
•Internet:Yes—The certificate is able to certify servers.
•App. installation:Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options >Edit trust setting to change the value.
Track protect. object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.
Call diverting
R1114_en.book Page 95 Friday, September 16, 2005 9:36 AM
Tools
96
Call diverting allows you to divert your incoming calls to
your voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired divert
option. To divert voice calls when your number is busy or
when you reject incoming calls, select If busy. Set the
option on (Activate) or off (Cancel), or check whether the
option is activated (Check status).
Several divert options can be active at the same time.
When all calls are diverted, is shown in the
standby mode.
Call barring and call diverting cannot be active at the same
time.
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to the official
emergency number programmed into your device.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode (shown only if supported by the
operator)—Select which network to use. If you select Dual
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
R1114_en.book Page 96 Friday, September 16, 2005 9:36 AM
Tools
97
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
In the standby mode, indicates a headset is
connected, and that the headset is unavailable, or a
Bluetooth connection to a headset is lost. indicates a
loopset is connected and that a TTY is connected.
Select Headset,Loopset,TTY,Bluetooth handsfree, or
Music stand and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 85.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
TTY.
Lights (for music stand only)—Set whether lights remain
on, or are switched off after the time-out.
If you are using a TTY, you must activate it on your device.
Press , and select Tools >Settings >Enhancement >
TTY >Use TTY >Yes.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 52.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice com.
application and its Profiles folder. Press , and select
Tools >Voice com. >Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select Options >New
application. To add a second voice command that can be
used to start the application, select Options >Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
R1114_en.book Page 97 Friday, September 16, 2005 9:36 AM
Tools
98
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesizer >Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Reset voice adapts..
Application manager
Press , and select Tools >Manager. You can install two
types of applications and software to your device:
• J2ME™ applications based on Java™ technology with
the extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia NXX. Software
providers will often refer to the official model number
of this product: the Nokia NXX-X.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
Install applications and software
indicates a .sis application, a Java application,
that the application is not fully installed,and
that the application is installed on the memory card.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options >View details.
• To display the security certificate details of the
application, select Options >View certificate. See
‘Certif. management’, p. 15.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove
the application, and install the application again from
the original installation file or the back-up copy.
R1114_en.book Page 98 Friday, September 16, 2005 9:36 AM
Tools
99
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are
downloading the .jar file, you may need to enter a user
name and password to access the server. You obtain
these from the supplier or manufacturer of the
application.
1To locate an installation file, press , and select
Tools >Manager. Alternatively, search the device
memory or a memory card (if inserted) in File mgr., or
open a message in Messaging >Inbox that contains
an installation file.
2In Manager, select Options >Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press .
To start a network connection and to view extra
information about the application, select Options >Go to
web address, if available.
To see what software packages are installed or removed
and when, select Options >View log.
To send your installation log to a help desk so that they can
see what is installed or removed, select Options >Send
log >Via text message or Via e-mail (available only if the
correct e-mail settings are in place).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
Note: If another software package depends on the
software package that you removed, the other software
package may stop working. Refer to the documentation
of the installed software package for details.
Settings
Select Options >Settings and from the following:
Software installation—Select whether Symbian software
can be installed: On,Signed only, or Off.
R1114_en.book Page 99 Friday, September 16, 2005 9:36 AM
Tools
100
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components. In
the Manager main view, scroll to an application, and
select Options >Suite settings to change settings related
to that specific application.
Activation keys for
copyright-protected files
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
To view the digital rights activation keys stored in your
device, press , and select Tools >Activ. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Keys not in use—View keys that have no media files
connected to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Activate content. Activation keys cannot be updated if
Web service message reception is disabled. See ‘Web
service messages’, p. 44.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
R1114_en.book Page 100 Friday, September 16, 2005 9:36 AM
Troubleshooting
101
Troubleshooting
Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock
code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press to close the
application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Browser services
Q: What do I do if the following message is displayed: No
valid access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic films covering the display
and camera. Ensure that the camera lens protection
window is clean.
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
R1114_en.book Page 101 Friday, September 16, 2005 9:36 AM
Troubleshooting
102
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select My own > Log > Options > Filter > All
communication.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox,Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia PC Suite to make a backup copy of all data to
a compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multimedia message.
R1114_en.book Page 102 Friday, September 16, 2005 9:36 AM
Troubleshooting
103
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging centre save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network, and
the multimedia messaging centre deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
multimedia messages. After this change, the device does
not make any network connections related to multimedia
messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the User Guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
R1114_en.book Page 103 Friday, September 16, 2005 9:36 AM
Battery information
104
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave fully charged battery connected
to a charger, since overcharging may shorten its lifetime. If left
unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it and take it to
the nearest authorized Nokia service point or dealer for
R1114_en.book Page 104 Friday, September 16, 2005 9:36 AM
Battery information
105
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1 When looking at the hologram on
the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another angle.
2 When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
3 Scratch the side of the label to
reveal a 20-digit code, for
example
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
4 Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
To create a text message, key in the
20-digit code, for example
12345678919876543210, and send to
+44 7786 200276.
National and international operator chargers will apply.
You should receive a message indicating whether the code can
be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
R1114_en.book Page 105 Friday, September 16, 2005 9:36 AM
Care and maintenance
106
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as
contacts and calendar notes) before sending your device
to a service facility.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
R1114_en.book Page 106 Friday, September 16, 2005 9:36 AM
Additional safety information
107
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least 1.5
cm (5/8 in) away from the body. When a carry case, belt clip
or holder is used for body-worn operation, it should not
contain metal and should position the device the above-
stated distance from your body.
In order to transmit data files or messages, this device
requires a good quality connection to the network. In some
cases, transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device, and persons with a hearing aid should
not hold the device to the ear with the hearing aid. Do not
place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 cm (6 in) be maintained between
a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should:
• always keep the device more than 15.3 cm (6 in) from their
pacemaker;
• not carry the device in a breast pocket; and
• hold the device to the ear opposite the pacemaker to
minimise the potential for interference.
If you suspect interference, switch off your device and move
the device away.
R1114_en.book Page 107 Friday, September 16, 2005 9:36 AM
Additional safety information
108
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of
this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for
essential communications like medical emergencies.
R1114_en.book Page 108 Friday, September 16, 2005 9:36 AM
Additional safety information
109
To make an emergency call:
1If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2Press as many times as needed to clear the display
and ready the device for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press the key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain emergency
numbers, or use other features that require network
coverage.
Warning: You cannot make emergency calls in the
Imaging mode, because the keypad is not active. To make
an emergency call, activate the Fold open mode.
Certification information (SAR)
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) recommended by
international guidelines (ICNIRP). These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines were
developed by independent scientific organisations through
periodic and thorough evaluation of scientific studies. The
guidelines include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for mobile devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit stated in the international guidelines is 2.0
watts/kilogram (W/kg)*. Tests for SAR are conducted using
standard operating positions with the device transmitting at
its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power
level, the actual SAR of the device while operating can be well
below the maximum value. This is because the device is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a base station, the lower the power output of the
device.
The highest SAR value for this device when tested for use at
the ear is 0.41 W/kg.
R1114_en.book Page 109 Friday, September 16, 2005 9:36 AM
Additional safety information
110
SAR values may vary depending on national reporting and
testing requirements and the network band. Use of device
accessories and enhancements may result in different SAR
values. Additional SAR information may be provided under
product information at www.nokia.com.
* The SAR limit for mobile devices used by the public is 2.0 W/
kg averaged over ten grams of body tissue. The guidelines
incorporate a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. SAR values may vary depending on national
reporting requirements and the network band. For SAR
information in other regions please look under product
information at www.nokia.com.
R1114_en.book Page 110 Friday, September 16, 2005 9:36 AM
111
A
access points 117
settings 118
activation keys 128
alarms
alarm clock 11
calendar 86
applications
installing 126
Java 126
B
backing up 125
Bluetooth 107
connecting two devices, pairing 109
device address 109
factory set passcode 109
headset 124
pairing 109
passcode, glossary explanation 109
security 108
switching off 110
bookmarks 89
brightness
display 116,124
setting in camera 36,43
C
cache, clearing 92
calendar
alarm 85
creating entries 85
synchronising PC Suite 86
call register
See log
calls
dialled numbers 28
duration 28
international 20
received 28
settings 116
settings for call divert 122
transferring 27
camera
adjusting brightness 36,43
adjusting colour and lighting 39
adjusting flash settings 36
adjusting video recorder settings 44
edit videos 45
flash 38
image setup settings 36,39
saving video clips 43
scenes 39
self-timer 38
sending images 37
sequence mode 38
still image camera settings 40
R1114_en.book Page 111 Friday, September 16, 2005 9:36 AM
112
CD-ROM 110
certificates 121
chat
See instant messaging
clear screen
See standby mode
clearing memory
log information 130
clock 11
alarm 11
settings 11
codes 120
lock code
PIN code 121
PIN2 code 121
security code 121
computer connections 110
conference call 20
connection settings 117
contact cards 31
inserting pictures 31
sending 32
storing DTMF tones 28
copying
contacts between the SIM card and device memory 32
text 72
copyright protection
see activation keys
cutting text 72
D
data connections
details 111
ending 111
indicators 9
date 11
digital rights management, DRM
see activation keys
DNS, domain name service, glossary explanation 119
E
editing videos
adding effects 45
adding sound clips 45
adding transitions 45
custom video clips 45
e-mail 73
automatic retrieving 78
offline 79
opening 77
remote mailbox 76
retrieving from mailbox 77
settings 81
viewing attachments 77
F
file formats
.jad 126
R1114_en.book Page 112 Friday, September 16, 2005 9:36 AM
113
.jar 126,127
.sis 126
RealOne Player 65
file manager 12
fixed dialing 32
FM radio 104
G
gallery
ordering files in albums 51
H
handsfree
see loudspeaker
headset settings 124
help application 10
I
indicators 9
instant messaging 97
blocking 99
connecting to a server 98
groups 101
recording messages 99
sending instant messages 99
user ID, glossary explanation 100
Internet
See Web
Internet access points (IAP)
See access points
IP address, glossary explanation 119
J
Java
See applications
L
lock code 121
log
erasing contents 30
filtering 29
log duration 30
loopset settings 124
loudspeaker 12
M
mailbox 76
automatic retrieving 78
media files
fast forward 66
file formats 65
mute sound 66
rewind 66
memory
clearing memory 28,29
viewing memory consumption 13
memory card 125
memory card adapter
see the Quick Start Guide, reduced-size MultiMediaCard
adapter
R1114_en.book Page 113 Friday, September 16, 2005 9:36 AM
114
menu, rearranging 15
messaging
e-mail 73
multimedia messages 73
text messages 73
movies, muvees
custom muvees 67
quick muvees 67
multimedia messages 73
mute sound 66
P
packet data connections 111
GPRS, glossary explanation 117
settings 119
pasting text 72
PC connections
via Bluetooth or USB cable 110
PC Suite
calendar data 86
synchronisation 110
transferring images to a PC 50
transferring media files 13
transferring music files to your memory card 65
viewing phone memory data 13
personalisation 17
phonebook
See contact cards
PIN code 121
profiles 16
R
radio 104
reminder
See calendar, alarm
remote mailbox 76
ringing tones
personal ringing tone 33
receiving in a text message 76
RSMMC, reduced-size MMC
see the Quick Start Guide
S
scenes
image scenes 39
video scenes 39
security code
See lock code
sending
contact cards, business cards 32
images 37
video clips 47
service commands 69
settings
access codes 120
access points 118
Bluetooth connection 107
calendar 86
R1114_en.book Page 114 Friday, September 16, 2005 9:36 AM
115
call barring 123
call diverting 122
certificates 121
configuring 10
cover display 124
data connections 117
date and time 120
display 116
headset 124
IM 98,102
language 115
lock code 121
loopset 124
original settings 115
personalising the phone 15
PIN code 121
screen saver 116
UPIN code 121
UPUK code 121
shortcuts
Web connection 88
SIM card
copying names and numbers to phone 32
messages 79
names and numbers 32
sis file 126
SMS centre, short message service centre 80
snooze 11
software
transferring a file to your device 126
sound clips 50
sounds
muting a ringing tone 26
recording sounds 96
speed dialing 21
standby mode 15
synchronisation 112
T
text message service centre
adding new 80
text messages 73
themes 17
time 11
transferring content from another phone 17
U
UPIN code 121
UPUK code 121
USB cable 110
USIM card
see glossary explanation in the Quick Start Guide
USSD commands 69
V
video call 22
answering 26
rejecting 26
R1114_en.book Page 115 Friday, September 16, 2005 9:36 AM
116
video clips 50
video player
See RealOne Player
Visual Radio 104
viewing content 105
visual service ID 105
voice commands 124
voice dialing 21
voice mailbox 20
changing the phone number 20
diverting calls to voice mailbox 122
voice messages 20
voice tags 124
making calls 21
volume control 12
during a call 20,23
loudspeaker 12
W
Web
access points, see access points
browser 88
R1114_en.book Page 116 Friday, September 16, 2005 9:36 AM