8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 34684 |
| Application ID | tuYh2Q7W5eUKoOXQMaPZeg== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 55.13kB (689162 bits) |
| Date Submitted | 1999-04-28 00:00:00 |
| Date Available | 1999-05-04 00:00:00 |
| Creation Date | 2001-06-27 13:18:57 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-27 13:18:59 |
| Document Title | 34684.pdf |
| Document Author: | jsoscia |
LVLI‘JI‘U 1. “IX
FCC 111: EF9 MCS—IZOOU
EXHIBIT 4
User Manual
No. 20 Park Ava IL Science-based Industrial Park, Hsinchu, Taiwan, R.0.C. Tel: 886 3 577 9966 Fax: 886 3 577 7154
for SlimScan 06
Basic anulremenls
- Pentium (or eonpatlbles) with
buill~ln USB supported BIOS system
- Wlndows SE
- CD-ROM drive (Internal or external)
MiéiotekScanner
Installation Guide
- 16MB RAM
' At lam AOMB hard msk wilh 15MB available
- SuperVGA Colordlsplay with 256 colorscr better
Important Nob.- l-Ion using "I. scam-r and snflwm, you than"! md ml: Microlok Scanner
Inst-"anon Guldo lint.
Contents
Unpack your scannzr and duck components ..... 1
Installing undzr Windows 98
Step 1 Verify the prcsaue of USB
Step 2 Connect Lhz scanner to your mmputer Z
Step] Texlyaurscannzr ,,,,
Troubleshooting
Federal Cnmmunications Commission (FCC)
Stulcmzm ,.
Specifications
Unpack your scanner and check components
Open your scanner package and check the
components as stated in your packing 1151, Do Not
install any ulthe software until the hardware has
been installed.
Before proceeding any further, check that you have
all the illustrated items below.
Scanner USB Cable
(55ng e tsga Micrmak Euvwa, av.
—| ‘ Thump“ 1
hlrp'lew.n|lcrotu( nI
Doc. No. “0002349
1mm. uztsm
¢»
1. Verify the presence of
USB
Turn on your computer and check to see tf USB
is unplemcnmd.
Visually inspect the USB ports of your computer.
USE Pom
If you cannot find the USB pom at the back of
your computer, read the docummtation that
came with your computer main board. If the
USB connector is available, though unwrred, you
need to purchase an USB cable that connecvs
one end to your main board, another end to the
extension bracket.
For computer main board with USB
supported: To enter BIOS settings and enable
USE, see the documentation that came with
your computer Normally whcn the computer
power is turned on, before starting medows
98, the computer W111 hint you to press some
keys for displaying BIOS menur
For computer main board without USB
supported: ln [his case, USB can be
implemented by an USB add-on card. The BIOS
setungs for main board type USB are not
required.
stal under W ndows 98
2 Connect the scanner to
your computer
1. Connect IZVDC power connector to your
SlimSmn C6.
2, Connect USB connector to your PC, another
and to your SlimSam C6.
_| ‘ Tea-1.905
2 Q»,
males.“ 19m
3.
e v ..
An Unknown Device message appears, asking
you to Search a new device.
From the .“Acld New Hardware Wizard" dialog
box, click ‘Next’ to display the following screen.
Lemar “E“ indicates the location
a}
Chck Next to continue a your cn-RoM dlive.
4. Click “Search for the best drtver (or your deViCE On the above screen, E:\ indimtes the default
(Resonant/ended)" w slan searching. CD-ROM drive locauon. Click Browse if your
CD-ROM drive is elsewhere. Chck Next to
continue,
¢ \ 1 Your sum-tet- is automatically dzlccled Click ¢
Next to continue
'1
Es, w, t
5 Insert the Minotek CD—ROM into your CD-
ROM drwe.
mm.“ wm ‘ fi
Click OK to prepare installing ScanWizard .
driver program.
8 The screen shows you the setupexe program tn
your Vlfmdows directory. You should NOT dick
on the OK button at Lhis time Instead, click the
Drives selection to choose the CD-ROM.
9 Locate the correct setup.exe program. which is
under E:\Scanwrz\Disle1 directory,
10.
11.
12,
Click OK to continue.
ScanWizard Installation has begun,
Microtek ScanWizard is the Twain dnver used
for the scanner to communicate wtth various
applicanons. ScanWtzarrl cannot be used by
itself and requires another program in order to
work,
Follow screen instructions to complete
installation. When installation is complete,
Microtck ScanWizard for Windows 98
appears as a folder on the Programs menu
lnsmll application programs
Install each application software by clicking on
the indivtdual program options.
Install documentation reader
Click Adobe Acrobat Reader, then follow screen
instructions unul installation is complete
Acrobat Reader is available for reading the
manuals on your CD—ROM.
7 l W, .
mum,“ Wm
3. Test you; scanner
1. Restart Windows 984 Click Start. Settinfi. and
select Control Panel.
2. Double—click on the System icon in Control
Panel, then select Device Manager from the top.
1 Double-click on “Microtek USE Scanner", you
can find ‘SIu-nScan C6” is listed. The scanner is
ready to scan.
1 Start up Scanner Test from the Microtelt
ScanWizard for Windows 98 folder in the
Programs menu. When started up successfully,
the screen below appears
Jet
5. Place your document face down on the scanner
glass. The top left comer of the document
should be at the ‘0,0" position on the ruler
guides running alongside the scanner.
6. Click the Flatbed button.
7, A preview of your image will be displayed in the
Microtek Scan'l'est window
8 Close and exit Micmtck ScanTest
9 To scan the document‘ start up your software
application to bring up the Microtek
ScanWizard, click on the Scan button in the
Preview window The image will be scanned and
delivered to your software application, where it
can be saved as a file.
For more details on how to operate your
stunner with Microtek ScanWizard, refer to the
Mirroteh ScanWtzard Reference Manual in your
CD~ROM.
Detected scanner
Detected Interface
The Flatbed button
é wwmwm
oubleshoot rig
it Windows 98 cannot detect use device, renew the
steps below.
1. Restart Windows 98. Select Start, Settings, and
Central Panel. Double-click the System icon
The System Properties dialog box appears. Click
the Device Manager tab.
Double—click “Universal serial bus controller” to
display two—line messages. “Intel 82371AB PCI
to USB Universal Host Controller" and “USB
Rout Hub".
“ENC-koala"
a Mudflats“:
is lm—uflm
was
Main
mm
wad-
mmmm
saw-a-
“may...“
syn-um
magnum; Hannah-unwant-
‘ uuum
If a yellow attention mark appears in front of the
“Intel 82371AB PCI to USB Universal Host
Controller" string, this means the driver — Intel
82371AB driver is not automatically installed,
For example, your computer 15 shown as the
above figure. You have two solutions to
approach:
Solinlim 1: Automatic setting
I. Seltct"lnte182371AB PCI to USB Universal
Host Controllefl
Z Click the Remove button.
3 Restart Windows 93 Your computer should
be able to detect the presence of SlimScan
C6 USE scanner,
Sulutlon 2: Manual setting
It Select “Intel 82371AB PCI to USB Univfl’sal
Host Controller",
2. Click the Remove button.
mam, mom
3. To fix {he p-mblem. doubledick the
“Universal serial bus controller” suing lo
display the following dialogbox.
3. Click “Update Drivei" to display the driver
selection dialog box
4. AL the left column, select "Intel"; the message
"l'nlel 82371AB PG [0 USB Universal Host
Controller” will appear at the right column.
Click Finish to exit,
5, Restart Windows 98 Your computer should
be able to detect the presence of Slijcan
C6 USE scanner.
To check the availability oiSlimScan C6 USB
scanner:
Optlon 1: Check it by clicking the “Scanners and
Cameras" icon in the Control Panel dialog box.
The detected scanner is displayed in (he “Scanners
and Cameras Properties" dialog box.
Option 2: Check n by clicking the "System" icon in
the Control Panel dialog box, Then click the Deuce
Manager tab. The detected scanner is displayed in
the Image Device iiem.
Delactud
scanner
“(mm-um
sun..."
34 “flatly-M1.-
a Symon—
—| l we
7 vza/sa 11:20AM
(FCC) Statemen
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These lirruts are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may muse harmful interference to
radio communications, However. there is no guarantee that interference will not occur in a particular
installation. If this equipment dofi cause hannful interference to radio or television reception, which can be
determined by turning the equipment all and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient/relocaie the receiving antenna.
- Increase the separation between the equipment and receiver.
’ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dmler or an experienced radio/TV technician for help.
Nate: Shielded interface cable wtthfem’te core installed on scanner connector end mustbe used with this equipment.
Trade Name Model Name
SlimSean C6 MCS—IZOOU
Changes or modifications not expressly approved by the manufacturer responsible
torcompuance could void the users authority to operate the equipment
T | Tapes 5 é vane. "20 AM
flu—L1 ~¢+ L—JL-
- .
ec cat ns
Trade Name SlimScan C6 USE
Model number . MCS—lZOOU
Type Desktop, Flatbed. Single pass
Optical “solution 600 dpi (H) x 1200dpi (v)
Sample depth 12 bits per color with Color Correction Technology
Calibration lime guy: 3 sec.
color: 6 sec.
gray/color: 20 sec. (power on first time)
Scanning speed in speed mode
line/gray: 5 ms lline
color: 15 ms [line
in quality mode
line/gray: 6 ms llinc
color: 18 ms [line
Q Transmission speed Preview: <185, Letter size
1 Mbytejs
Scanning Area
Min. 1 line, 2 pIXClS (gray and color), 15 pixels (line—an)
Max. 215 mmx295 mm
(8.5"x11.6")
Warm up time 15 sec,
Power Supply 100 V [0 120 V
Vain-age Frequency 47 Hz in 63 Hz
Power Consumption DC lZV/IA 12W max.
Dimensions 10.4" X 1.7” x 16.4"
Weight approx. 7.3 kg
T ‘ Tm pea r i muse. 11:20 AM
| F
FCC ID, : El“) MUD-ILUUU
(13) DELTA POWER ADAPTER (Model)
(14) INNER POWER ADAPTER (Mode2)
QuieTek Corporation Page 35 of 36 sz.l
N0.75»l, Wang-Yeh Villey, YnngvHsmg Tsum. Accrediawd lab. Of BCIQ, NVLAP, VCCI. TUV
Chiung-Lm. HsianIm County. Tliwaflv 11.0.0
Tel , 03591-8858, Fax . 037591‘8859 NVLAP Lib Code : 200347-0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:27 13:18:57 Producer : Acrobat Distiller 4.0 for Windows Author : jsoscia Title : 34684.pdf Modify Date : 2001:06:27 13:18:59-04:00 Page Count : 11EXIF Metadata provided by EXIF.tools