8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 62264 |
| Application ID | DJL9CpXj+cMS9LhcmcwM1A== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 36.65kB (458120 bits) |
| Date Submitted | 1999-10-06 00:00:00 |
| Date Available | 1999-10-13 00:00:00 |
| Creation Date | 2001-05-21 20:13:56 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-21 20:13:58 |
| Document Title | 8 |
Fee-Ly argmu sumo ia u s MicrotekScanner scs| @; Installation Guide Version for PC (Windnws 95ISBINT4JJI forthe scal"Make'I® series & Mac (as 5.1 or inter) This document pluvides information an new to install your Mictutak scanner on a PC or Mai: using the scanners SCSI interface. For PC SCSI installah'on. see pages I I0 5. For Mac SCSI installaiiun, see pages 6 to 8. $65 nsta at on on the PG 1 . Unpack scanner Your Micmtek ScanMaker scanner comes With [W0 built—in interfaces: SCSI and USB. To operate your scanner, you may choose either, not both, inletlnue. See the graphic below to lmcala the different pans on the back ofthe scanner. as well as the SCSI ID dial and the scanner accessory purl. Open your scanner package and check the components as stated in yuut packing list. You should install software first, then install hardware Before proceeding any futthet, check that you have the items listed on the packing list If any item is missmg, contact Microtelt. _USB Port 1 l LAccessary Pun SCSI pom Powev Cam I SCSI ID Dial SCSI Pan 2 Energy Star Notice As in ENERGY STAR Puma, Micmiek inmmnnuml, 1m. has . Tstmmalov Swllch Now Make sure the SCSI ID number for you r scanner, which is preset w a, dais not conflict wuh the SCSI IDs nfzhc determined thin lhls “my ulhcr dzvia‘s on your SCSI chain, Ii'you Mud to rimngr (hr "was rim ENERGY STAR I SCSHanyuurscanner, mmihzdialandchoaieuSCSI ID fluidclmfi for “my “(WM numbcrjmmo ms (do not use 7, a, onJ. Copyright 0 1999 Mlctutak Iniemational. Inc. Internet: hnD-wawrmicwtektcw I49-oi7xxxxA. August 1999 SCS nsta 2. Install software lr Tum on your computer If you are usmg Windows NT 4.0, log in as “Administrator" in order to “install the software. Insert the Microtek CD—ROM into your CD— ROM drive. The Microtek Software Installer screen should automatically come up. Note: I] the Mirrorek Software Installer screen does not come up automatically double-Elick "My Computer" anyaur Windows desktop, then double their the CD-ROM icon to start the installer program. When the Microtek Software installer scrzm appears, click on each software program in the order that it appears on the screen to install all software components click sonwars on the list to install. For each software. follow the on-screen instructions during installation Default values are specified at every point during installation, simply accept these values in continue installation until you finish. a) b) c) d) n on the PC In some applications, auxiliary inion-natiori (such as the Readme file) may be displayed after that particular program finishes installing Simply click the “X" close box at the upper right comer ofthe displayed Window to return to the Microtek Soitvimre installer. Do not restart your computer until all the software has been installed Mierotelr Scanwiznrrl s. This is your scanner controller program for capturing images from your scanner and delivering it to your image— editing application. Follow the Orr—screen instructions during installation. Alter ScanWizard 5 finishes installing, you Willbe prompted to restart your computer. Select No to continue installing the rest of the software cam PngeKupzr Standard. This is your document management program. Catt: Omnil’age Limited Edition, your OCR text-scanning software During installation oi OmniPage Limited Edition, you will be asked to select your “Source". Make sure Miaolelt ScenWizard 5 is selected At the end of installing OmniPage Limited Edition, select “Nit I will restart my computer later" (not “Restart your computer"). mm Adobe Acrobat Reader This is your documentation reader for reading and printing the manuals on the CD-ROM. After all the software has been installed‘ click EXIT zit the bottom left of the Micrtitek Software installer screen SC nsta at on on the PG 3.00nnect scanner 3 Pluglhepowercordlnlothebackolihe Samuel: and plug the other end mm a wall Tum all your computer Dullel or puwer source. Nole‘ Belore performing the next step, you must have an ASH—compliant SCSI intzrfnce card already Installed myaur computerand workmgymperly. If you nezd help in setting up the ASH-compliant SCSI mmj'ace card In your compum, please view the dlgufllfile (Insmllutinn _5651. pdj) In the (ah-mfg julder unyour Minotck CD-ROM, Connect the SCSI cable from one of [he scanners SCSI ports to the SCSI Interface card on the back at“ your Computer Then Set the [crmmatur switch [0 the “ON" posilion. Important: Make sure you connect to the SCSI card on the back of your cumpulcr -— net to (he parallel pnmer pan. The SCSI pcm may be Indicated by this symbol: Q, 4. Press (he scunner's power buuun, [his wlll turn on the scanner. The green llght on the from 01 the scanner w11| blink for a few seconds and then slay on solid Power button Press me scannefs power bullon m tum en/ou (he scanner 5 Turn on your Compuker. The system wfll find your scanner aulomatlcally on w SGS nsta 4. Test your scanner 1. Click Start, Settings, and select Coutml Panel Double-click the System icon in Control Panel, then select Device Manager from the top. 2. Double-cltck Imaging Device or Microtzk Scanners. Verify that your scanner is listed here. Click “OK" to close all dialog boxu. 3 In Windows, 30 to “Stan. Programs‘ Micrulek ScanWizard 5 for Windows", and select Scanner Tzst. When started successfully, the screen belnw appears ‘ ‘ g-uuM. lam...- Manly-mun-h' ‘°"' Detected :'“"“4'°‘\ scanner Detected "Harlan Click me “Flatbed“ button la prevlew sun" cum Mann-n: can.“ t on on the PC 4. Place your document wnh faced down on the scanner glass, and click on the flatbed button . Top 0! demmam vanes hon! at the scanner. 5 A preview ofyouringz Will be displayed in the Microtelt ScanTesl window. Click OK, and exit Micmtek ScanTeSt; you are now ready to scan [l trouble happens m the proceeding scan test, sec the digital file (Tmubleshootmg_SC51.pdj) in the Techinfc folder on your Mlcrotek CD-ROM. SOS nsta 5. Scanning an Image 1. Place the image to be scanned on your scanner. 2. Press the scanners push button, or double-click ScanWizard 5 icon on the desktop to launch ScanWizArd 5. 3 When ScanWizard 5 is launched, it automatically performs a pressean on the material and places it in the preview area. 4. In preview Window, you can resrze the floating dotted lme around [he tmage by dragging on the edges or comers of the frame to determtne the final stze of the acrual scan. 5, Make adjustments using tool buttons, then click the Scan to button The image is then scanned and save to a file. Other than file saying. you may also choose to deliver saved image to an image- editing software, an e-mail editor, or a web browser. Save scanned Cllck on Ihis Image to a tile, or button, deliver it in an Image switching processor, an eAmafl Advanced “lab or a web Conllol Panel window browser. Cltck it to exit ScattWtzant 5 Tool buttons tor Image settings Raslze dolted line lot size of the actual scan on on th PC 6. Readlng the documentation 1 Insert the Mtcrotek CD-ROM into your CD» ROM drive. 2 When the Microer Software Installer comes up on your screen, click the Manual check box that corresponds to the manual you Wish to read This wtll launch Adobe Acrobat Reader, and you can then read or print the manual, Clickthe ' “Manual" . button In sea the manuals 7. Troubleshooting You might encounter problems on the software and hardware installation. To solve the problems, see the digital file (Troubleshootin&5551.pdj) m the Teclunftt folder on your Microtek CD—ROM. 1 . Unpack scanner Open your scanner package and check the components as stated in your packing list. You should install software first, then install hardware. Before proceeding any further, check that you have the items listed on the packing I'lSL If any item is missing, contact Micro tek. Your Microtek ScanMaker scanner comes With two bulIt-ln interfaces: SCSI and USB. To operate your scanner, you may choose etther. not both, interlace. See the graphic below to locate the dilferent ports on the back of the scanner, as well as the SCSI ID dial and the scanner accessory port. l LAecassmy Port l —usa Pen FM" C0“ 7 SCSI Purl i SCSI ID Dlal SCSI Port 2 Terminator Switch Nate. Make sure the SCSI lD numhn/myom Scanner, whlcli is preset ta 641025 not mnflict wtth the SCSI IDs u/ the other dtvttts an yuquCSl chum, [jyou rim! to change the SCSI ID unyaur scanner, mm the dial and choose 4 SCSI ID numberfmm 0 m 6 (do not use 7. 8 or 9). t on on the Mac tos 2. Install software I Turn on your computer 2 Install the image-editing application that came wtth your scanner. 3. Insert the Micmtek CD-ROM into your CD- ROM drive‘ and double-click the CD-ROM when it appears on your Macintosh desktop to open it. x. Mlbrlhk'JWlhitlc users we Irish rim-n. flman-ge s 2 tr Seaman! 5 mm NM" 3 0 mm- §CSI mm 2 4. Install the soltware on your Microiek CD-ROM, including the Iollovtnng: ' Micwlek Scanwiurtl 5. This is your scanner controller program rm capiunng images from your scanner rind delivenng it [0 your lmflgEAedlling application - Cure Omnil’age Limited Edition. This is your OCR text-scanning software - Adobe Acrobat Reader This is your documentation reader for reading and printing the manuals on the CD-ROM To install each sollmre, open the soliware program‘s folder and then click the “Installer" icon in that pmgram‘s folder. Follow the on- screen msrruciions until installation is completed. SC nsta a on on the Mac ntos 3. Connect scanner 3. Plug the power cord tnto the back of the scanner. and plug the other end mm a wall 1, Turn all your computer. outlet or power source. 2, Get the SCSI cable. Connect une end of the SCSI cable to your computer, and connect the other end of the cable to the SCSI port on the scanner Then set the terminator switch to the “ON“ position, Nate, Ifytm mmpuler is a Power Mac G3, ynu must have an ASPl-cvmpltant SCSI uni already msmuzd lnyam tompnler and warhmg properly before runnemng. ljyuu need help m settling up the ASH-compliant 5551 Interface card in your computer, please vtew the dtgtlulfile Umublzshuulm‘LGlpdfi in H1: Mutt/010m” on your Micwlck CD-ROMt 4. Press the scanner‘s power button, thts wtll turn an the scanner. The green high! on the front ml the scanner will blink for a few seconds and then stay on soltd, Pew-r button has me scanners power button to turn Dn/Dfl Ihe scannert 5. Turn on your computer, The scanner can be found by the system automatically SOS nsta at on on the Mac ntosh 4. Scanning an Image 1. 2. Glen butlun Place the image to be scanned on your scanner Press the scanner’s push button to launch ScanWtzard 5 When Scanlemcl 5 15 launched, it automatically perlon'ns a pte-scan on the material and place it In the pmvtcw area In preview wmdow. you can resize the floating dotted ltne around the tmage hy draggmg on the edges or comers ol the frame to determtne the final stze of the actual scan. Make adjustmenls using tool buttons, then cltck the Scan to button. The tmage is then scanned and save to a file, Other than file saving, you may also choose lo delwer saved image to an tmage-edttt’ng software, an e-matl editor, or a web browserr Save scanned image to a file. or deliver it in an image processor. an e-mail editor. at a web blow/soy. Click on this hullnn. swilchlng Advanced Control Panel windnw Tool buttons tar image ssnmgs Resize dotted line '07 size 0' the actual scan 5. Raading the documentation 1 Insert the Microtck CD-ROM mto your CD- ROM dnve. 2 Launch the Adobe Acrobat Reader program. From the File menu. choose the Open command, and open the manual file you wish to view, manuals have a pdfextenston to thetr file name. The manual ts then ready to be viewed or pnnred 6. Troubleshooting You might encounter problems on the software and hardware tnstallanon. To solve the problems, see the dtgual file (TroubleshaotmLSCSlpclfl in the Techinfo (older on your Mtcrotek CD-ROM Fee ID'EF‘PME’ away mug Specifications Media [mags Sensor Scanning Modes Scanmng area Resolution Image Controls Bngl-llness Semngs Contrasr Setungs Exposure Time Sclecuons Resoluuon Semngs Scanning Speed Voltage Power Consumpuon Dxmenslons (L x W X H) Weight Envuonmem Reflecuve color or black‘and-whue onglnals, Lrnear array ccn wrrh daylight fluorcscem lamp Smgle scanning pass; 42-1311 color; 14-b1r grayscale; 1-bn black and whue: 12 built-in halfiunes 8 5” x 14"/215,9 mm x 355.6 mm (Legal paper 5112) Opucal resolution: 1200 dpr x 2400 dpi lnrerpalnred resulution‘ Unhmited From -100% 10 v100% in 196 Increment. From —42% to +49% m 796 mcremems From 0% to +512% m 2% mcremenls From 1 Clpl w 800 dp! m l-Clpl lncremenr 5 mrlhseconds per line for lmemrr, halfmne; 10 millisuunds per lme for gray: 20 milhseconds per lme for cnlur (speed mzasurzd m 400 Clpl). AC 100V to 240V AC 100V to 240V. 1 5A Max ; 47 m 63H1140 warts 214”x119" x 2 B” (544.5 mm x 302.4 mm x 70 mm) 12.1 LBS/5 5 KG Operating lempemrura 10° to 40°C (50° Lo 104”F) Reluuve humldrry: 20% m 3596 FcCI “ft/"ls ‘Q‘NuX/z (45 Federal Communications Commission (FCC) Statement This equipment (Trade name: ScanMaker XIZUSL. Model name: MIE-2400X12US) has been tested and found to comply Wlll'l the limits (or a Class B digital device, pursuant to Pan 15 of the FCC Rules. These limits are dmigned to provtde reasonable protection against harmful interference in a residential installation. This equipment generals, uses and can radiate radio frequency energy arid, if not installed and used in accordance With the instructions. may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or relevtston chcpnont which can be determined by turning the equipment off and on. the user is encouraged to try It) correct the interference by one or more of the following measures. Reonent/relocate the receivmg antenna. increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit difleient from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician [or help. Note: A shielded interface cable with/emit core installed on scanner connector end must be used with this equipment. CAUTION Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user‘s authority to operate the equipment. Microtek Scanner Insta Iation Guide for the ScanMelker® series I on.” u. “REF”, SERIAL Version fur Pc lwinduws BB) 1; Mar: (Apple iMac 163 with buil usa puns) Thls document provides information on how to Install your Micrcttsk scanner on a PC or Mac using iha st‘am‘er’s Universal Sena! Bus (USS) menace. For FC USE inllallailon, see pages I (0 5‘ For Mac USB Installation, see pages 5 (0 8, USB nsta anon on th Pc 1 . Unpack scanner Open your scanner package and check the components as stated in your packing list You should install software first, then install hardware Before proceeding any [urthen check that you have the items listed on the packing [ISL If any item IS missing, conL’ACl Micmtek. chev Cord SCSI VD Dial ‘ Energy star Notice 9 As an ENERGY STAR Partner, Micmlek Inlzmfltmnul, [m I-ms tlrlcrmincd that this scunnbr mEl‘KS iht ENERGY STAR guidelines tor cnerg clhclcnt SCSI Fun 2 Yuur Microtek ScanMaker scanner comes With twn bullt—in interfaces SCSI and USB To operate your stunner, you may choose either, not both, interface See the graphic below [0 locate the different parts on the back of the scanner, mcluding the scanner accessory port. I LAecessory Pan iUSE Pun SCSI Port 1 Telmlnalor Switch Copyright c 1999 Mluutek lmemailonal, Inc. lmemet: mmd/wwwmlcrmsmum l49»00xxxxA, August 1999 USB lnsta at on on th 2. lnstall software 2. Turn on your computer. Insert the Microtek CD—ROM into your CD- ROM drive. The Mictotek Software Installer screen should automatically come up. Nate: l/tlie Miemteh Software Installer screen does not come up automatically, doublzecliclt “My Camputer'on your Windows desktop, then double- :lttk the CD-ROM icon to start the installer program. When the Microtek Software Installer screen appears. click on each soltware program in the order that it appears on the screen to install all software components Click soitwars on the fist to install. For each software. follow the onscreen instructions dunng installation. Default values are specified at every point during installation: simply accept these values lo continue installation until you finish. In some applications, auxiliary information (such as the Readme file) may be displayed after that particular program finishes installing. Simply click lhe "X" close box at the upper right corner of the displayed Window to return to the Mtcroiek Software Installer Do not rmart your computer until all the software has been installed. a) Microlek ScanWizal-d 5. This is your scanner controller program for capturing images from your scanner and delivering it to your image editing application. Follow the on~scteen instructions during installation. Alter ScanWizard 5 finishes installing. you will be prompted to restart your computer. Select No to continue installing the rest of the software. b) Cam PngeKnpzr Standard. This is your document management program. c) Caere Omnil’age Limited Edition, your OCR text—scanning software During installation ol OmniPage Limited Edition. you will be asked to select your “Source“. Make sure Microtelt ScanWizard 5 is selected. At the end of installing OmniFage Limited Edition, select “No, 1 will restart my computer later" (not "Restart your computer“). sun,“ 61) Adobe Acrobat Reader This is your documentation reader for reading and printing the manuals on the CID-ROM. 4 After all the software has been installed, click EXIT at the bottom lell oi the Microtek Soltwate Installer screen. USB sta a 3. Connect scanner 4. Connect one end of (he use cable to your computer, and connect the other end of the 1, Turn off your computer. table [0 the scannet's USB port. 2 Plug the power cord mto the back of the scanner, and plug the other end mm a wall outlet l or power source. Make sure no other cable is connected to the scanner except the power and at this point. t , 5 Turn on your computer. The system W‘lll [1nd yuur scanner automaucally. 3 Press the scanner’s power button, this will turn on the scanner. The green ltght on the front of the scanner wtll blmk for a few seconds and then stay on sohd. Puvur button Press lha scanner‘s pnwev butlon to turn omen me scanner. USB sta a 4. Test your scanner l. Click Stan, Sailings, and select Comm] Pant]. Double-chck the System icon m Comrul Panel, then select Device Manager from the lop. Double-cllck Imaging Dcvicc or Micmtck Scanners. Verify that your scanner is listed here Chck “OK" to close all dlalug boxes. In Windows, go [0 "Start, Programs, Microrek ScanWizard 5 for Wmdows”. and select Scanner Tcsl. When started su ccessfully. the screen below appears. ._3 Downed K ‘ scanner _ Untamed Interface Click (he nFlamed" button In greview sun-n on: Nut-hum nun-n 4. Place your ducumem wuh faced down on the scanner glass, and click on (he Flzlhzd human rap of document A vaces 0mm 0! we ‘ scanner. u 5. A prevlew of your image will be drsplayed in (he Mrcrorek ScanTesr window. Click OK, and ex“ Mlcmtek ScanTesl; you are now ready to scan If [rouble happens in the proceeding scan test, see the digital file (DoubleshaatingUSBydj) m the Techinfo folder on your Microlek CD-ROM USB nst t on on th PC 5. Scanning an Image 1. 2. place the image [0 be scanned un your scanner. Press the scanner's push button, or double-click ScanWizard 5 icon on the desktop to launch ScanWizard 5. When ScanWizard 5 IS launched, it automatically performs a prz-scan on the material and places it in the preview area. In preview Window, you can 115115 the floating dutied line around the image by dragging on the edges or comers of the frame to determine the final size of the actual scan. Make adjustments using tool buttons, then click the Scan to button, The image is then scanned and save to a file. Other than file savmg, you may also choose to deliver saved image to an image- edi’ttng soliware, an e-mail editor, or a web browser Click on this button, switching Advanced Control Panel window _¢u:— 3d " ‘ Click n in ‘ w— exit ScanWIzam 5 Save scanned image to a me. or deliver it in an image pmssur. an email editor. at a wet: bmwser, I Tool buttons ; w let image settlngs Resize dotted line lot size at the actual scan 6. Reading the documentatlon Insert the Microtek (SD-ROM into your CD- ROM dnvz. 2 when the Microtek Software Installer comes up (in your screen, click the Manual check box that corresponds to the manual you Wish (0 read. This Will launch Adobe Acrobat Reader, and you can then read or print the manual. Infill.” bunun tu see the manuals 7. Troubleshooting You might encounter problems on the software and hardware installation. To solve the problems, see the digital file (TraubleshuulinLUSdej) in the Techmtti lnldcr on your Microiek CD—ROM. USB nsta a n on the Mac ntos 1 . Unpack scanner Open your scanner package and check the components as stated in your packing list You should install software first, then install hardware. Before proceeding any further, check that you have the items listed on the packing list. If any item is missing, call Micmtek. Your Micmlek ScanMaker scanner comes with [W0 built—in interfaces SCSI and USB. To operate your scanner, you may choose either, not both, interface. See the graphic below to locate the dilferent ports on the hack ol the scanner, including the scanner accessory port. ‘ L Accessory Port ‘ i USB Port Pm’ W“ 7 — scsx Fort i SSS! ID Dial SCSI Port 2 Terminator Swuch 2. Install software 1. 2. Turn on your computer. install the image-editing application that came With your scanner, [risen the Microtek CD-ROM into your CD-ROM drive, and double—click the CD—ROM when it appears on your Macintosh desktop to open it Note. lfyou are using an Apple lMdL wtth System 8.1. install the iMac update driver. ra do this, open the iMac updatejolder, then double-click the installer icon, When the software license agreement dialog box appears, Limit the ”Agree" button. Another dialog box ansiaii iMac Update) will appear; click the "Install" button. Next, install the software on your Microtek CD- ROM. including the followtng: - Mia-melt ScanWizar-d S This is your scanner controller program for capturing, images from your scanner and delivering it to your image-editing application ' Cacre Omnil’agc Limited Edition. This 15 your OCR text-scanning software - Adobe Acrobat Read“, This is your documentation reader for reading and priming the manuals on the CD-ROM. To install each software, open the software program's (older and then click the “Installer" icon in that program‘s [older Follow screen instructions until installation is completed. Restart your Macmtosh when software installation is done, USB nsta at on on the Mac tosh 3. Connect scanner I Turn offyuur compuxer. 2 Plug the pnwer cord mm the back of (he scanner, and plug the other and mm a wall nude! or power source Make sure no other cab]: is connected lo the scanner except the pew" cord at this point. 3 Press (he scanner's power button tlns wlll turn on the scanner. The green llghl on (he from of the scanner will blink for a few seconds and [hen slay on SOlld. %/ (3&4 Penu— hum" Press the Summer‘s power bunon m tum Dn/ofl the scanner. 4, Connect one and of the USB cable to your computer, and connect the other end of the cable lo the scanners USB port. A Connccnng w an Apple Mac B. Connecnng m a Puwcr Mac 63 (like the model lndlCBKEd) wixh built-in USB ports Turn on your computer. The system w1ll find your scanner automaucnlly USB nsta at on the Mac tos 4. Scanning an image 1. 2, Place the u-nage to be scanned on your scanner. Press the scanners push button to launch Scanleard 5 When Scanleard 5 ls launched, ll automatically performs a pre-scan on the materlal and places lt ln the prevtew areal. In preview window. you czlrl reslze the floating dotted line around the lmage by dragging on the edges or corners or the frame to determine the hnzll size oi the actual scan. Make adjustments using tool buttons. then click the Scan to button. The mag: ls then scanned and save to a flle Other than flle saving, you may also choose to deliver saved image to an lmageediling software, zln e—mall editor. or a web browser. Save scanned image to a tile. or deliver ll in an lmaga processor, an e-mall editor. at a web browser. - Click on Ihis ‘ button. switching Advanced Carmel Panel window Tool buflnns lot image settings Rssim dotted line lot size a! me amual scan 5. Reading the documentation 1. Insert the Microlek (ID—ROM lnlo your CD- ROM drlve. 2. Launch the Adobe Acrobat Reader program. From the File menu, choose the Open command, and open the manual file you wish to View; manuals have a pdf extension to thelr flle name. The manual is then ready m be Viewed or printed 6. Troubleshooting You mlght encounter problems on the software and hardware installation To solve the problems, see the dlglwl l'lle (TroubleshootlnLUSdef) in the Terhlnjo folder on your Microtek CD—ROM. Media Image Sensor Scanning Mudes Scanning area Resolution Image Controls Brightness Settings Cnntrast Settings Exposure Time Selections Resolution Settings Scanning Speed Voltage Power Consumption Dimensions (L x W X H) Waiglit Envt rcmment Specifications Reflective color or black-and-white originals Linear array CCD with daylight fluorescent lamp. Single scanning pass; 42 -bit color; 14-bit gmyscale; l—bit black and white, 12 built-in halftones, 8,5" x 1471159 mm x 355 5 mm (Legal paper Size) Optical resolution: 1200 dpi x 2400 dpi Interpolaied resolution: Unlimited From «100% (0 +100% in l% increment. From —42% to +4996 in 7% increments From 0% to +5 l2% in 2% increments. From 1 dpi to 800 dpi in l-dpi increment 5 milliseconds per line fur line-art, halfione‘ 10 milliseconds per line (or gray: 20 milliseconds per line for color (speed measured at 400 Elpi). AC 100V to 240V AC 100V to 240V. 1,5A Max", 4710 63 Hz; 40 watts 21.4” x 11.9“ x 2.8“ (544 5 mm x 302 4 mm x 70 mm) 12 1 LBS/5 5 KG Operating temperature: 10“ to 40°C (50° to 104“F) Relative humidity 2096 to 8536 Federal communications Commission (FGC) Statement This equipment (Trade name. ScanMaker X12U5L. Model name: MRS-2400XIZUS) has been tested and found [0 comply with the limits for a Class B digital clevtce, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection agatnst hamiful interference in a residential tnsrallation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions. may cause hamiful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment. does cause harmful interference to radio or televtsion reception. which can be determined by turning the equipment all and on, the user 15 encouraged to try to correct the interference by one or more of the following measures- - Reoriendreloeate the receivmg antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced mdio/TV technician for help. Note: A shielded interface cable withjern‘te tore installed on scanner connector end must be used With this equipment. CAUTION Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user‘s authority to operate the equipment
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:05:21 20:13:56 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:05:21 20:13:58-04:00 Page Count : 20EXIF Metadata provided by EXIF.tools