Microtek MRS-600V48U Image Scanner User Manual sm3800new3a

Microtek International Inc Image Scanner sm3800new3a

users manual

12 3 45DocumentationPC MACUnpack the scanner and checkcomponentsUnpack the scanner package and check for majorcomponents. Please refer to the enclosed PackingList for a detailed listing of your components.• Microtek Scanner• Power Adapter• USB (Universal Serial Bus) Cable• Documentation• Microtek CD-ROMInstall the softwarePC:A. Place the Microtek CD-ROM into theCD-ROM drive.B. Follow the on-screen instructions to install thedriver and software. Do not turn off yourcomputer until all the software has beeninstalled.NOTE: If the Microtek Software Installerscreen does not come up automatically,double-click the following in succession: “MyComputer” on your Windows desktop; the CD-ROM icon; then cdsetup.exe to start theinstaller program.C. Install the image-editing software applicationthat came with your scanner.D. Restart your computer.Unlock the scanner carriage•With the scanner power switched off, lift thescanner front end and locate the carriagesafety lock lever (located at the front-rightcorner of the scanner bottom).•Slightly slide the lever to the right until youhear a “click”, indicating that the scannercarriage has been unlocked.Connect the USB cableA. Connect the computer end of the USB cable toyour computer.B. Connect the other end of the USB cable to theUSB port of the scanner.The system will detect your scannerautomatically.Connect the power adapter to apower source to apply power toscannerA. Connect the power adapter to the back of thescanner.B. Plug the power adapter into a wall outlet orpower source and observe the green LED inthe front panel lights up.MAC:A. Install the image-editing software applicationthat came with your scanner.B. Place the Microtek CD-ROM into the CD-ROMdrive and install all the software components.C. Restart your computer.Microtek International, Inc.http://www.microtek.comI49-003093 AInstallingBABAPCMACEnergy Star NoticeAs an ENERGY STAR Partner,Microtek International, Inc. hasdetermined that this scannermeets the ENERGY STARguidelines for energy efficiency.Unlock
Place the scan materialA. Place the original to be scanned on thescanner bed.B. The top end of the original should be orientedtowards the front end of the scanner with thesurface to be scanned facing down.Launch ScanWizard 5To launch ScanWizard 5 as a stand-aloneprogram, double-click the ScanWizard 5 icon onyour desktop.By default, the scanner will detect the settingsunder Original, Scan Type and Purpose; andautomatically perform a “fast preview” of yourimage based on those settings.Select preferencesYou can use the following tool buttons to changethe settings according to your preferences.Original – defines category of the original (scanmaterial).Scan Type – selects output image type (color, gray,or B&W).Purpose – defines image resolution to match yourtarget application.NOTE: Click the Scale Output, Adjust, and Resetbuttons if you need to make further adjustments.678AFor More Help...If you experience problems with installation, referto the Troubleshooting file in the Techinfo folder onyour Microtek CD- ROM.For more information on operating your scannerwith ScanWizard 5, launch your Internet browserto further view the software manual (in HTMLformat). Alternatively, PC users can also view thesame manual directly from the Microtek CD-ROMInstaller window by simply double-clicking the“View Manual” button.?Scan your materialA. Click the Scan to button from the ScanWizard5 Control Panel.B. When the Save As dialog box appears, specifythe folder location, a file name, and the formatfor the output image, then click Save. Theimage is then scanned and saved to thespecified location.Send image to application after saving:If this option is checked, the scanned image issaved first, then automatically delivered to animage-editing software, an e-mail editor, or a webbrowser as indicated in the destination box.9Scanner Button ControlsThe ScanMaker 3800 is equipped with fivescanner buttons providing quick access to themost frequently used functions. These buttons areScan, Copy, E-mail, OCR , and Scan-to-Web. Theparameters for each button can be set through theMicrotek Scanner Configuration (MSC) utility.(Note that you need to exit ScanWizard 5 beforeaccessing tge MSC utility).To launch the MSC utility, you can either: (For PCs)Go through the Windows menu -- click Start,Programs, ScanWizard 5, MSC; or (For PCs orMacs) Double-click the MSC icon on your desktop.When the MSC panel appears, click any of the 5tabs to specify the Scan settings accordingly. (Fordetailed information, refer to the online help in theMicrotek Scanner Configuration Utility software).ScanCaptures images that can be saved as files or sentto an image editing application for furtherprocessing.CopyScans image and sends it to your printer.E-mailScans the image and delivers it directly to your e-mail editor.OCRScans a text document, convert and saves it as atext file format. File may be immediately edited ifconfigured in the MSC utility.Scan-to-WebScans an image and sends output to a website. Itopens your default browser and displays thecaptured image.PC MAC9BGetting Started9AScanE-mailCopyOCR Scan-to -Web
Federal Communications Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computeror peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this device must accept any interference received, including interference thatmay cause undesired operation.Responsible Party: Loi Han3715 Doolittle DriveRedondo Beach, CA 90278-1226U.S.A.Telephone No: 1-310-297-5000Federal Communications Commission Interference StatementThis equipment (Model: MRS-600V48U) has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Note: 1) A shielded of USB interface cable with ferrite core installed on the scanner connector end must be used with thisequipment. 2) AC adapter with ferrite core installed on the scanner connector end must be used with this equipment.Caution: : : : : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void theuser's authority to operate the equipment.Trade Name Model NumberScanMaker 3800 MRS-600V48UTested to ComplyWith FCC StandardsFOR HOME OR OFFICE USECopyright © 2001 Microtek International, Inc. http://www.microtek.com April 2001
MRS-600V48U( ScanMaker 3800 ) SpecificationsScanning Modes Color, grayscale and black & white in a single scanning pass42-bit color input and output(approx. 281 trillion colors)16-bit grayscale(approx. 65,536 shades of gray)Scanning area 8.5" x 11.7" (216 mm x 297 mm)Resolution Optical: 600 dpi x 1200 dpiInterpolated: 9600 dpi x 9600 dpiDimensions (L x W X H) 17.1" x 11.5" x 3.4"(435 mm x 292 mm x 86 mm)Weight 6 lbs / 2.7 kgVoltage AC 100V to 120V (U.S. and Canada)AC 200V to 240V (Europe and other parts)50-60 HzEnvironment Operating temperature: 10° to 40°C (50° to 104°F)Relative humidity: 20% to 85%

Navigation menu