Midea Kitchen Appliances EMA34GYY-S Microwave Oven User Manual VG8EMA34GYY S

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd Microwave Oven VG8EMA34GYY S

Contents

VG8EMA34GYY-S_User manual

SAVE THESE INSTRUCTIONS CAREFULLYRead these instructions carefully before using yourmicrowave oven, and keep it carefully.If you follow the instructions, your oven will provide you withmany years of good service.INSTRUCTION MANUALMicrowave OvenGuangdong Midea Microwave and Electrical Appliances Manufacturing  Co.,Ltd. MD Microwave Oven Manufacturing  Yongan 6 Road, Beijiao, Shunde, Guandong, P.R.C   Model:EMA34GTQ-S
Model:. 3 . kg34LRated Voltage:Rated Input Power(Microwave):Rated Output Power(Microwave):Oven Capacity:External Dimensions:Net Weight:Approx2 2Specifications575 527 368mm208/230V~60Hz        00W1800WEMA34GTQ-SPRECAUTIONS TO AVOID POSSIBLEEXPOSURE TO EXCESSIVE MICROWAVEENERGY(a)  Do not attempt to operate this oven with the door open since this can result in      harmful exposure to microwave energy. It is important not to defeat or tamper      with the safety interlocks.(b)  Do not place any object between the oven front face and the door or allow soil or       cleaner residue to accumulate on sealing surfaces.(c)  Do not operate the oven if it is damaged. It is particularly important that      the oven door closes properly and that there is no damage to the:      (1) DOOR (bent)      (2) HINGES AND LATCHES (broken or loosened)      (3) DOOR SEALS AND SEALING SURFACE(d)  The oven should not be adjusted or repaired by anyone except properly      qualified service personnel.228
   IMPORTANT SAFETY INSTRUCTIONSWARNING1. Read all instructions before using the    appliance.2. Read and follow the specific: "PRECAU-    TIONS TO AVOID POSSIBLE EXPOSURE    TO EXCESSIVE MICROWAVE ENERGY"    found on page 2.3. As with most cooking appliances, close    supervision is necessary to reduce the risk    of a fire in the oven cavity.4.To reduce the risk of fire in the ovencavity:i). Do not overcook food. Carefully attendthe appliance when paper, plastic, orother combustible materials are placedinside the oven to facilitate cooking.ii).Remove wire twist-ties and metal handles from paper or plasticcontainers/bags before placing them inthe oven.iii). If materials inside the oven ignite,keep the oven door closed. Turn theoven off, and unplug the appliance.Disconnect the power cord, shut offpower at the fuse or circuit breaker panel.iv). Do not use the oven cavity for storagepurposes. Do not leave paper products,cooking utensils, or food in the cavitywhen not in use.5. This oven must be grounded. Connect only to properly grounded outlet. See"GROUNDING INSTRUCTIONS" foundon page 4.6. Install or locate this oven only in accordance with the installationinstructions provided.7. Some products such as whole eggsand sealed containers-for example,closed glass jars-are able to explodeand should not be heated in the oven.8. Use this appliance only for its intended    uses as described in this manual. Do    not use corrosive chemicals or vapors    in this appliance. This oven is    specifically designed to heat or cook       or dry  food. It is not designed for      industrial or laboratory use.9.  As with any appliance, close    supervision is necessary when used    by children.10. Do not operate this oven if it has a      damaged cord or plug, if it is not      working properly or if it has been      damaged or dropped.11. This appliance should be serviced only      by qualified service technicians.      Contact the nearest authorized service      facility for examination, repair or      adjustment.12. Do not cover or block any openings on       the oven.13. Do not store or use this appliance      outdoors.14. Do not use this oven near water, for      example, near a kitchen sink, in a wet      basement, near a swimming pool, or      similar locations.15. Do not immerse cord or plug in water.16. Keep cord away from heated surfaces.17. Do not let cord hang over edge of      table or counter.18. When cleaning  surfaces of door and      oven that comes together on closing      the door, use only mild, nonabrasive      soaps or detergents applied with a      sponge or soft cloth.3When using electrical appliances basic safety precautions should be followed,including the following: WARNING-To reduce the risk of burns,electric shock, fire,injury to persons,or exposure to excessive microwave energy :::
i)    Do not overheat the liquid.ii)   Stir the liquid both before and halfway through heating it.iii)  Do not use straight-sided containers with narrow necks.iv)  After heating, allow the container  to stand in the microwave oven for  a short time     before removing the container.v)   Use extreme care when inserting  a spoon or other utensil into the container.19. Liquids, such as water, coffee, or tea are able to be overheated beyond the boiling point      without appearing to be boiling. Visible bubbling or boiling when the container is      removed from the microwave oven is not always present. THIS COULD RESULT IN     VERY HOT LIQUIDS SUDDENLY BOILING OVER WHEN THE CONTAINER IS    DISTURBED OR A SPOON OR OTHER UTENSIL IS INSERTED INTO THE LIQUID.This appliance must be grounded. In the event ofan electrical short circuit, grounding reduces the riskof electric shock by providing an escape wire for theelectric current. This appliance is equipped with a cord having grounding wire with  a grounding plug. The plug must be plugged into an outlet that isproperly installed and grounded.Consult a qualified electrician or serviceman if thegrounding instructions are not completely understoodor if doubt exists as to whether the appliance isproperly grounded. If it is necessary to use anextension cord, use only a 3-wire extension cord thathas a 3-pronged grounding plug, and a 3-slotreceptacle that will accept the plug on the appliance.GROUNDING   INSTRUCTIONSSAVE THESE INSTRUCTIONSWARNINGDANGERElectric Shock HazardTouching some  of  the  internalcomponents can cause seriouspersonal injury or death. Do notdisassemble this appliance.Electric Shock HazardImproper use of  the groundingcan  result in electric shock. Donot plug into an outlet untilappliance is  properly  installedand grounded.The marked rating of the extension cord shall beequal to or greater than the electrical rating of theappliance.4
CAUTIONPersonal Injury HazardTightly-closed utensilscould explode. Closedcontainers should be openedand plastic pouches should bepierced before cooking.Utensil Test:1. Fill a microwave-safe container with 1 cup of cold    water (250ml) along with the utensil in question.2. Cook on maximum power for 1 minute.3. Carefully feel the utensil. If the empty utensil is    warm, do not use it for  microwave cooking.4. Do not exceed 1 minute cooking time.UTENSILS See the instructions on "Materials you can use inmicrowave oven or to be avoided in microwave oven."There may be certain non-metallic utensils that are notsafe to use for microwaving. If in doubt, you can test theutensil in question following the procedure below.Radio Interference1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in    or  tripping over a longer cord.2. Longer cord sets or extension cords are available and may be used if cared  is exercised  in    their  use.3. If a long cord sets or extension cord is used:   1) The marked electrical rating of the cord set or extension marked electrical rating of the cord        set or extension cord should be at least as great as the  electrical rating of the appliance.    2) The extension cord must be a grounding-type  3-wire cord; and    3) The longer cord should be arranged so that it will not drape over the countertop or tabletop        where it can be pulled on by children or tripped over unintentionally.1. Operation of the microwave oven may cause interference to your radio, TV     or similar equipment.2. When there is interference, it may be reduced or eliminated by taking the    following measures:    1) Clean door and sealing surface of the oven    2) Reorient the receiving antenna of radio or television.    3) Relocate the microwave oven with respect to the receiver.    4) Move the microwave oven away from the receiver.    5) Plug the microwave oven into a different outlet so that microwave oven             and receiver are on different branch circuits.5
Materials you can use in microwave ovenUtensilsAluminum foil Shielding only. Small smooth pieces can be used to cover thin parts ofmeat or poultry to prevent overcooking. Arcing can occur if foil is tooclose to oven walls. The foil should be at least 2.5cm away from ovenwalls. Microwave-safe only. Follow manufacturer's instructions. Do not usecracked or chipped dishes.Always remove lid. Use only to heat food until just warm. Most glass jarsare not heat resistant and may break.Heat-resistant oven glassware only. Make sure there is no metalic trim.Do not use cracked or chipped dishes.Follow manufacturer’s instructions. Do not close with metal tie. Makeslits to allow steam to escape.Use for short–term cooking/warming only. Do not leave oven unattendedwhile cooking.Use to cover food for reheating and absorbing fat. Use with supervisionfor a short-term cooking only.Use as a cover to prevent splattering or a wrap for steaming.Microwave-safe only. Follow the manufacturer’s instructions. Should belabeled "Microwave Safe". Some plastic containers soften, as the foodinside gets hot. "Boiling bags" and tightly closed plastic bags should beslit, pierced or vented as directed by package.Microwave-safe only. Use to cover food during cooking to retainmoisture. Do not allow plastic wrap to touch food.Thermometers Microwave-safe only (meat and candy thermometers).Wax paper Use as a cover to prevent splattering and retain moisture.Glass jarsGlasswareOven cookingbagsPaper platesand cupsPaper towelsParchmentpaperPlasticPlastic wrapDinnerwareRemarksFollow manufacturer’s instructions. The bottom of browning dish must bethe ceramic board. Incorrect usage may cause the   to break.Browning dishceramic boardplaced smoothly on Materials to be avoided in microwave ovenUtensilsAluminum trayFood carton withmetal handleMetal or metal-trimmed utensilsMetal twist tiesPaper bagsPlastic foamWoodMetal shields the food from microwave energy. Metal trim maycause arcing.May cause a fire in the oven.Plastic foam may melt or contaminate the liquid inside when exposedto high temperature.Wood will dry out when used in the microwave oven and may splitor crack.May cause arcing. Transfer food into microwave-safe dish.May cause arcing. Transfer food into microwave-safe dish.May cause arcing and could cause a fire in the oven.Remarks6
SETTING UP YOUR OVENNames of Oven Parts and AccessoriesRemove the oven and all materials from the carton and oven cavity.Your oven comes with the following  accessories:Instruction Manual                1A) Control panelB) Observation windowC) Door assemblyD) Safety interlock systemCDABNote: 1) Don't press the ceramic board forcibly.         2)  Take and put the   gently during the operation.         3)  After using, don't touch the ceramic board by hand in order to avoid high temperature              utensils  in order to avoid damage  the ceramic boardEFG) E) Ceramic boardF) GBack plateFront platepart  and s.scald to7
Installation side must be open.  Remove all packing material and accessories.Examine the oven for any damage such asdents or broken door. Do not install if oven isdamaged.Countertop InstallationCabinet: Remove any protective film foundon the microwave oven cabinet surface.1.   Select a level surface that provide         enough  open  space  for  the  intake        and/or outlet vents .A 10-cm spacing should be kept betweenthe appliance and right and back walls,and a 30-cm spacing kept on the top.Never dismantlethe applicance's feet ,nor block the air intake and exhaust opening.       can damage the oven.)  Place  the  oven  as  far  away  from    radios and TV as possible.     Operation of microwave oven may     cause interference to your radio or TV     reception.       outlet. Be sure the voltage and the        frequency is the same as the voltage       and the frequency on the rating label.1)  Blocking the intake and/or outlet openings23  Plug your oven into a standard household),ABCFig 1Fig  2( )Fig 1ure 30cmOPENeftThe l12  inch( )4.0 inch(10cm) 4.0 inch(10cm)2.The applicance can be installedwith a degree  of  overlap .,then replacing screw in its place tightly. ,Taking off installation board) loosening screw)taking off four screws as shown in the pictur)putting installation board to the following locationthen fixing screw just taking off tightlyC( )Figure2(A(B(e. The maximum overlap height is   layers.two4)Warning: T  he plug socket,electric appliances or the appliance which are   liable effected by heat and moisture should   be kept away from any vents on the oven.8
Cleaning InstructionsAlways keep the oven clean1. Cleaning the glass viewing window, the inner door panel and oven front face.    For best performance and to maintain the high degree of safety, the inner door panel and    oven front face should be free of food or grease build-up. Wipe these parts with a mild   detergent, rinse and wipe dry. Never use abrasive powders or pads.2. Cleaning the control panel and plastic parts.Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts,as this may cause damage to these parts.Use a dry cloth (not a soaked cloth) to clean these parts.3. Cleaning the oven interiorAfter use be sure to clean up spilled liquids, spattered oil and food debris as quickly aspossible. If the oven is used when dirty, efficiency drops and the dirt gets stuck on the ovensurface and may cause bad odours. Clean the interior with a cloth soaked in luke-warmwater with a mild detergent dissolved in it, then rinse the soap off with a damp cloth.CAUTION: Do Not wipe plastic and painted sections of the oven with bleach, thinners orother cleaning agents, as this may cause these parts to dissolve or change sharp.4. Cleaning the oil blockage regularly,keep the oil blockage clear .Otherwise,the stain will drop on the food.on the oil blockage                      5. Cleaning the filter regularly, keep it clear .The appliance will over heat  when the filter is blocked.6.When the appliance is operated,oil blockage and filter location must correct vioding to damage other parts .  ,a( )the installation in page 18 and 19Radio Interference1. Operation of the microwave oven may cause interference to your radio, TV     or similar equipment.2. When there is interference, it may be reduced or eliminated by taking the    following measures:    1) Clean door and sealing surface of the oven    2) Reorient the receiving antenna of radio or television.    3) Relocate the microwave oven with respect to the receiver.    4) Move the microwave oven away from the receiver.    5) Plug the microwave oven into a different outlet so that microwave oven             and receiver are on different branch circuits.9
Control Panel and FeaturesOPERATION(1) Power Buttons(2) Time Entry Button(6) Number Keyboard(1)(2)(3)(4)(5)(6)(4) Stop/Reset Button(5) Start Button(3) Double Quantity Button10
OPERATION INSTRUCTIONOption Setting Discription1EOC Tone2BeeperVolume3BeeperOn/Off5On the Fly6 Door Reset8 ManualProgramming9Double DigitOP:10OP:11OP:12OP:20OP:21OP:22OP:23OP:30OP:31OP:40OP:41OP:42OP:43OP:50OP:51OP:60OP:61OP:70OP:71OP:80OP:81OP:90OP:914KeyboardWindow7 Max time3 seconds beepContinuous beep5 quick beeps,RepeatingBeeper OffLowMediumHighKeybeep OffKeybeep On15 seconds30 seconds60 seconds120 secondsOn-the-Fly DisableOn-the-Fly EnableDoor reset DisableDoor Reset Enable60 Minute Maximum Cook Time10 Minute Maximum Cook TimeManual Programming DisableManual Programming EnableSingle Digit Mode-10 programsDoule Digit Mode-100 programsItems bolded below are the default values.Appendix.   A    User Options11
The oven shall ship with the following Preset Cook Times unless otherwise noted in theproduct Specification.Button Display (Time) Power12345678900:100:200:300:451:001:302:00: 0100%100%100%100%100%100%100%100%100%100%Cook Factors80%80%80%80%80%80%80%80%80%80%Appendix. B   Default Cook Times2:303:003 312
"             " displays when the oven is electrified for the first time. If "       " button pressed, the oven will change to idle mode. Note: Under idle mode, no button can be pressed.1) Entry.The oven shall enter idle mode after a set of seconds have expired in Ready Mode    without a keyboard press or a door open and close. The number of seconds is determined    by the keyboard Timeout Window, set by User Option 4.2) During idle mode,  is blank.And there shall be no oven activity.3) Opening and then closing the oven door, the oven will exit the idle mode and into    ready mode.1) In this mode, the oven is ready to either begin a manual or preset cook cycle.2) Opening and closing the door while the oven is in Idle Mode will put the oven    into Ready Mode.2) During Ready Mode, "READY" displays.3) From the Ready Mode, the oven can go to almost all of the other modes.1) While the door of the oven is open, the oven shall be in Door Open Mode.           2) During this mode,   is blank. And the fan and oven lamp work.3) When the door is closed, if User Option OP:60 is selected and the oven was  running a manual or preset cook cycle, the oven shall enter Pause Mode.   In all other cases, the oven shall return to   Mode with User Option OP:61  set,opening and closing the door will clear out any information about a Manual or  Preset Program which was running.2. Idle Mode3. Ready Mode4. Door Open Mode1. Power Up_ _ _ _ _ _ _the screenthe screen For some model:"              "  displays230V TOUCH 1 208V TOUCH 2      when the oven is electrified for the first time.            Press number buttons "1" or "2" to choose,the screen will alternate display "230V" or "208V", rolling display "TOUCH START",press "           " button, the oven will change to idle mode.Door open13
1) This mode allow the users to temporarily stop the cooking cycle to inspect or    stir the food item.2) While in Manual Cook Mode, or Preset Program Cook Mode, if the door is open    or closed, or if the "           " pad is pressed, the oven will enter Pause Mode.3) While paused,   will display the remaining cooking time.4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode,   dependent on User Option 4. Additionally,if the "         " button is pressed, the   oven shall immediately enter Ready Mode.OR if press "           " button,   the oven will go into working mode.3) During this mode, "00:00" displays4) If you press "Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%" button to select    power level, the screen will display the related power. If the same button pressed twice, the power    will change to PL10. If no power chosen, "PL 0" is default.5)  During setting process, press "          " to enter Manual Cook Mode.       Press "          " to enter Ready Mode.1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing    the "           " pad will cause to the oven to begin Manual Cook Mode.2) During this mode, remaning cooking time displays. The fan and oven lamp will light.3) When cooking program finish, the oven will enter End of Cook Cycle Mode.     If you press "         " button under this mode,the oven will enter Pause Mode.1) The user may manuallly enter a cook time and power level while in this mode.2) While the oven is in the Ready Mode,pressing the "Time Entry" pad on the keyboard will   put the oven into Manual Cook Entry Mode.5. Pause Mode6. Manual Cook Entry Mode7. Manual Cook Mode1,input the time you need.the screen      14
1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook   Mode, the oven shall go into The End of Cook Cycle Mode.2) During this mode, "DONE" displays.3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until     the user acknowledges this by either opening and closing the door or pressing the "      "    pad. If User Option OP:10 is selected, after the 3 second beep, the oven shall go into   Ready Mode.1) This mode allows cooking of food items through a one pad touch operation.    While in Ready Mode,pressing one of t  digit keys on the keyboard will cause    the oven to run the Preset Program associated with that key.2) During this mode,   displays the remaining cooking time. If it is multi-stage cooking,    the total remaning cooking time displays not a particular stage cooking time.) When cooking program finish, the oven will enter End of Cook Cycle Mode.     If you press "         " button under this mode,the oven will enter Pause Mode.   buttons, the preset cooking program will start automatically.8. End of Cook Cycle Mode9. Preset Program Cook Mode10. On the Fly Cookingen3the screen1) While the oven is cooking, if User Option OP:51 is selected,press number2) The screen displays the remaining cooking time.3) When cooking program finish, the oven will enter End of Cook Cycle Mode.15
11.  Programming ModeThis mode allows the user to assign cook times and power levels to the once touche button.1)  Open the door and press "1" pad for 5 seconds,the buzzer will sound once and enter to     Programming Mode.2) "PROGRAM" displays. you can input the time    you need.Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%"  to input the power level.    will display the related power. If the same button pressed twice, the power   will change to PL10. If no power chosen, "PL 0" is default.    80%. "CF: " displays. If you need to change the cooking  , just press one of    the number buttons to set.   When the program saved, "PROGRAM" display   "       " to save the program, the buzzer will sound three times briefly     tell you the time is no use. And then   turn back to display "PROGRAM".   The time set before will be no change.) Close the door, the oven will turn back to Ready Mode.    If press "          " button during setting process, the oven turn to Door Open Mode.   The program that not saved will be lost. If there is program saved as memory procedure,   press the related number button, the saved program will start. If no saved program,   the buzzer will alarm when pressing number button and it will not work.For example: set the program as memory cooking.  Power level PL7 and cooking time is 1 minute and 25 seconds.Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.Step 2: Press number button "3", the screen will display "P:03",After two seconds,Step 3: Press number buttons "1", "2" and "5" to input the cooking time.Step 4: Press "Med-Hi/70% " button,"  " displays. Setting finished.Step  : Press "           " to save. When use the program next time, just press "3",             the related program will start.Note:1. If the electricity is cut off, the saved program will not lost.2. If the program need to reset , just repeat the aboved steps.3. If press "         " at the last step, it will turn back to Ready Mode. The setting will be no use.15) After setting the time and power, press "          ", the cooking program will be saved.6) If all the cooking time exceeds the MAX.time User Option 7, when press7 to70) To change the cooking fators: If press "X2",  will display "CF:XX". The default factor isthe screenthe screenthe screen5Note:  et the timeS  first,then choose the power.1:25 the screen will display the   time " :30".related3) Press  "408 factors.16
1) Through the use of the X2 pad, the user can easily set the time two of a particalar   food item.2) If  the "X2" button is pressed  in ready mode, followed by the starting of a Preset Program,    or  if  the "X2" button is pressed in 5 secondes of starting  a  Preset Program, the oven will    start cooking with the quantity preset cooking time.3) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display the quantity    preset time.   For example, number button "5" and its preset time is 1 minute. Then press "X2", then time   will change to 1:00*(1+0.8)=1:48(1 minute and 48 seconds)4) When cooking program finish, the oven will enter End of Cook Cycle Mode.Note: This function can be used under   mode.13.  Stage Cooking Programming   This allows the user to cook food items at 1) Three stages can be set at most under cooking mode or programming mode.    Aftet setting the power and time for the first stage, press "Time Entry " to set the second stage.    And the same step to set the third stage.2) When setting the second, third  stage, press " Time Entry", "STAGE 2","STAGE 3"  displays.3) Press "           " button to start cooking.Example: In programming mode, set t  stages  cooking.The first stage is PL7 and time is 1 minute 25 seconds. The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow.70" displays.    The first stage is finished.Press " Time Entry", "STAGE 2" displays.Medium 50% ", " " displays.     The second stage is finished. Press "        " button to start cooking.12. Double Quantity cooking    wo50manual cook mode and program ing m de.m       .The total time cout s down.1:25 5:40 o- -press number buttons " "3  to -ress number button "1" for 5 seconds,"PROGRAM" displays.the screen will display the   time " :30".related,pa.b. Press number button "3", the screen will display "P:03",After two seconds,c.Press "1","2","5" to input the cooking time. "1:25" displays.d. Press "Med-Hi 70% ", "e. f. Press "5", "4","0" button, "5:40" displays.g.Press "h.i Open the doornprogrammpreset  e17
14.  Use Option Mode      This allows the user choose between various ways for the oven to operate.1)  Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter     this mode.2)    displays "OP: - -".3) Press any number button to enter related mode setting.    For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.    If you want to change, keep pressing "2",   displays "OP:20", "OP:21","OP:22","OP:23",   "OP:20" .....in cycle.4) Press "             " to save the current setting. After saved, "OP: - -" display again.5) During setting process, press "        " to enter Door Open Mode. Close the door will enter    Ready Mode.6) If "             " button not pressed at the last step, the program cannot be saved but stay at previous    way.15.  Service Mode1)  Open the oven door and press "3" pad for 5 seconds to enter service mode.2)    displays "SE ".3) To check the times of closing or opening the door, just press number button "3",       will display the times.4) If press " 1 " pad for Tube Hours.    If press " 2 " pad for Tube Cycles.    If press " 3 " pad for Door Cycles..    If press " 4 " pad to  Clear service information.    Only for some medels:If press " 5 " pad to run Top Mag. Oven displays amps.    If press " 6 " pad to run Bottom Mag. Oven displays amps.5) Press "        " to enter Door Open Mode. Close the door will enter Ready Mode.16.  Factory-default setting1) Press "        " and " 0 ", the  buzzer  sounds  once,and  the screen wil l display  "CHECK". I f i t is  in the factory-default setting,  will display " 11 ",after three seconds,   turn to the ready mode     In the Ready Mode,pressing "       "  an "  0 " to factory-default setting. d   the oven .Press"       "  If  not in  to cancel the display ang back to ready back in  the process of display.the factory-default setting,  will display " 00 ", press"       " to the factory-default setting, will display " CLEAR ". 2) If do not press "       " when the   display " 00 ",the setting will cancel.the screenThe screenthe screenthe screenThe screenthe screenthe screenscreenRVICENote:  actort-default setting   operation   restore all configure to f . Be careful in the as it willthe  buzzer  sounds  once,after self-testing,the screen will display " "11 or  " "00 .18
Pull up the Take off the fil er .To restall,align the base plate mounting holes,How to remove and install the filterplastic nail capinsert the plastic nails,press the plastic nail capt.19
thumb pressed herethe arrow shown,pushed back slamly, then pulling down.  1 hands with oil blockage ,pressed on 2.status of remove 3.taking oil   from the appliance. blockage1.Hands to take the oil  ,after alignment  three cylinder of the  oil   , inserting      the three    blockageblockage2.The left hand grasp the microwave, right thumb to press the arrow directions and forced to push back.And the left thumb hard pressed upword at thesame time. put the right of oil blockage              buckle .  3.From right to left, make the oil  the oil  buckle completely  go.   blockage loaded.  W   hen finish, check to  ensure that   blockagethumb pressed here         How to remove and install the  blockageinto the   of the front plateholes of the back plate.oil Warning:Before remove and install the oil blockage, avoid high temperature scald.be sure to unplug the appliance from the power supply,and 20
Trouble shooting 21

Navigation menu