Midland Radio 77321 CB Radio with Weather Alert User Manual 10002 06
Midland Radio Corporation CB Radio with Weather Alert 10002 06
Users Manual
FRONT COVER GOES HERE Part No: Title: Author: Output Date: IMPORTANT NOTICE! Safety Definitions Statements in this manual preceded by the following words are of special significance: WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (00119a) NOTE Refers to important information and is placed in italic type. It is recommended that you take special notice of these items. HARLEY-DAVIDSON MOTORCYCLES ARE FOR ON-ROAD USE ONLY This motorcycle is not equipped with a spark arrester and is designed to be used only on the road. Operation of off-road usage in some areas may be illegal. Obey local laws and regulations. This manual should be considered a permanent part of the motorcycle and should remain with the motorcycle when resold. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. (00139a) CAUTION CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. (00140a) Printed in the U.S.A VISIT THE HARLEY-DAVIDSON WEB SITE http://www.harley-davidson.com YOUR OWNER'S MANUAL WE CARE ABOUT YOU Welcome to the Harley-Davidson® Motorcycling Family! When enjoying your Harley-Davidson motorcycle, be sure to ride safely, respectively and within the limits of the law. Always wear a helmet, proper eyewear and protective clothing, and insist your passenger does too. Never ride while under the influence of alcohol or drugs. Know your Harley® and read and understand your owner's manual from cover to cover. Sign up for a Harley-Davidson Rider's Edge® Course (call 1-800-5882743 for a course near you) or a Motorcycle Safety Foundation rider course (call 1-800-446-9227 for a course near you). Protect your privilege to ride by joining the American Motorcyclist Association. Visit www.ama-cycle.org for more information. Your new Harley-Davidson motorcycle is designed and manufactured to be the finest in its field. Your Harley-Davidson motorcycle conforms to all applicable U.S. Federal Motor Vehicle Safety Standards and U.S. Environmental Protection Agency regulations effective on the date of manufacture. This manual has been prepared to acquaint you with the operation, care and maintenance of your motorcycle and to provide you with important safety information. Follow these instructions carefully for maximum motorcycle performance and for your personal motorcycling safety and pleasure. Your Owner's Manual contains instructions for operation and minor maintenance. Major repairs are covered in the HarleyDavidson Service Manual. Such major repairs require the attention of a skilled technician and the use of special tools and equipment. Your Harley-Davidson dealer has the facilities, experience and Genuine™ Harley-Davidson® parts necessary to properly render this valuable service. We recommend that any emission system maintenance be performed by an authorized Harley-Davidson dealer. Harley-Davidson Motor Company © 2005 H-D. Printed in the U.S.A. CMI-X.X-06/05 CUSTOMER SERVICE ASSISTANCE Most sales or service issues will be resolved at the dealership. However if an issue arises that your dealer cannot resolve, please follow the procedure below. 1. Discuss your problem with the appropriate personnel at the dealership in the Sales, Service or Parts area. If that proves unsuccessful, speak to the owner of the dealership or the general manager. 2. If you cannot resolve the issue with the dealership, you can contact the Harley-Davidson Customer Service Department by calling (414) 343-4056 or write to: Attention: Customer Service Department Harley-Davidson Motor Company P. O. Box 653 Milwaukee, WI 53201 To avoid delays, please have the following information available to give to the Customer Service Representative: * Your name, address and phone number. * Motorcycle V.I.N. (Vehicle Identification Number) found on the vehicle registration or stamped on the steering head and on a label located on the motorcycle itself. * Name and location of the dealership. * Current mileage. * Clear description of issue. PERSONAL INFORMATION DEALER INFORMATION Name: Name: Address: Address: City: State: Zip: Telephone: City: State: Zip: Telephone: Vehicle Identification Number: Sales Contact: Ignition Key Number: Service Contact: Security System Personal Code: Parts Contact: -- -- -- -- This owner’s manual illustrates and describes features that are standard or are available as extra cost options. Therefore, some of the equipment shown in this publication may not be on your motorcycle. Harley-Davidson reserves the right to change specifications, equipment or designs at any time without notice and without incurring obligation. TABLE OF CONTENTS 2006 SOUND SYSTEM Advanced Audio System....................................................1 Stereo Receiver.................................................................2 Front Panel Controls..........................................................3 ON..............................................................................3 1, 2, 3, 4, 5/Left Arrow................................................3 6..................................................................................3 5/Left, Up, Down, Right Arrows...................................4 OK...............................................................................4 COM...........................................................................4 INT..............................................................................4 NAV.............................................................................4 LCD.............................................................................4 CD Door......................................................................4 EJECT........................................................................4 AUX.............................................................................5 Left Handlebar Controls.....................................................7 +/AUDIO/- Switch........................................................7 PTT and +/SQ/- Switch...............................................7 Right Handlebar Controls...................................................9 UP/MODE SEL/DN Switch.........................................9 Receiver Operation..........................................................11 Set Time-of-Day........................................................11 Turn Receiver ON/OFF.............................................11 Select a Frequency Band..........................................12 Volume......................................................................12 AM vs FM Reception................................................12 AM............................................................................12 FM.............................................................................12 FM Stereo vs FM Mono............................................12 WB............................................................................13 Tuning-in a Radio Station..........................................13 Manual Tuning...........................................................13 SEEK Tuning.............................................................13 SCAN Tuning............................................................13 Preset Memory/Tuning..............................................14 PRESET SCAN Tuning.............................................14 Adjusting Volume......................................................14 Mixing Bass and Treble.............................................15 Adjusting AVC...........................................................15 Adjusting Display Contrast........................................17 CD/MP3 Operation...........................................................18 Auto Load..................................................................18 Disc Error 1...............................................................19 Eject..........................................................................19 Tracks........................................................................19 Fast Advance and Reverse.......................................19 Random....................................................................20 TABLE OF CONTENTS Scan..........................................................................20 Repeat......................................................................20 MP3..........................................................................20 Recommendations for Handling CDs...............................21 Intercom and Citizen Band with Passenger Speakers.....22 Headsets and Sockets.....................................................23 VOX Microphones............................................................24 Speaker Controls.............................................................25 SPKR Switch............................................................25 Rider to Passenger Speaker Balance.......................25 Passenger Controls..........................................................26 UP/MODE SEL/DN Switch.......................................26 PTT and +/VOL/- Switch...........................................26 Sidecar Controls..............................................................29 MODE and +/TUNE/- Switch....................................29 PTT/+/VOL/-..............................................................29 Intercom Operation..........................................................30 Operation..................................................................30 Activating the Intercom and the VOX Microphones....30 Adjusting VOX Sensitivity..........................................31 Adjusting Rider Headset Volume..............................31 Adjusting Passenger Headset Volume......................32 CB Operation...................................................................32 Activating the CB......................................................32 ii Entering CB Setup....................................................32 Selecting a Channel..................................................33 Adjusting Squelch.....................................................33 Transmitting...............................................................33 Adjusting Volume......................................................34 CB Range.................................................................34 Audio Routing and Mixing................................................36 General.....................................................................36 Troubleshooting................................................................39 Operational Troubleshooting.....................................39 Radio Fuses..............................................................39 The Advanced Audio System by Harman/Kardon is based on an electronic unit mounted inside the front fairing of selected Harley-Davidson Touring models. The system can be expanded with additional Advanced Audio accessories that include a Citizen Band transceiver, a General Mobile Radio Service (GMRS), a 6-disc CD/MP3 changer, XM Satellite Radio, GPS positioning and turn-to-turn navigation, and a voice activated hands-free "Bluetooth" phone and a digital amplifier. For FLHX, FLHTC, and FLTR: The Advanced Audio System is a multi-band (AM, FM and WB) radio receiver that includes a Compact Disc (CD)/MP3 player and an auxiliary (AUX) port for media players. The receiver is stereo and plays through left and right speakers mounted in the rider fairing. For FLHTCU: The Advanced Audio receiver also supports additional passenger speakers, a rider/passenger intercom and a 40 channel Citizen Band (CB) radio transceiver. Advanced Audio Accessoires: For the FLHX and the FLTR: The system can be upgraded with the following Advanced Audio Accessories: • Intercom/40-channel Citizen Band radio transceiver. • General Mobile Radio Service (GMRS). • XM Satellite radio. • GPS positioning and turn-to-turn navigation. For the FLHTC and FLHTCU: In addition to the accessoires above the system can be upgraded with these additional Advanced Audio Accessories: • Six disc CD/MP3 changer. • High output amplifier (standard on FLHTCU with TLE Ultra sidecar). • Hands-free phone ("Bluetooth" wireless technology). There are many unique features in this system. Read this section to thoroughly understand its operation. Do not change compact discs while riding, and do not select a volume level that blocks out traffic noise. Distractions or a volume level that blocks out traffic noise, could cause loss of control resulting in death or serious injury. (00086a) 2006 SOUND SYSTEM ADVANCED AUDIO SYSTEM hdtopic000574_1 There are no serviceable parts inside the unit; leave all servicing to qualified service personnel. Disassembly of the unit could result in equipment damage and/or equipment malfunction. (00172a) Do not disassemble unit. Laser radiation is present if disc player is disassembled and the interlock fails or is defeated. Exposure to laser radiation could lead to death or serious injury. (00087a) Set intercom volume level and other controls before riding to minimize adjustments on the road. Distractions can lead to loss of control, resulting in death or serious injury. (00088a) STEREO RECEIVER hdtopic000531_1 The Advanced Audio System stereo receiver is a radio (3 band maximum) with a full function Compact Disc (CD)/MP3 player and an auxiliary (AUX) input. 2 2006 Sound System Auxiliary audio devices can play through the receiver's amplifier and speakers when connected to the AUX input port. Auxiliary devices included MP3 players, cassette players, and mini-disc players. Additional genuine Harley-Davidson motor accessories that can utilize the AUX port include: • Road Tech™ HA90 MP3/WMA Digital Music Player • Road Tech™ 75 Radar and Laser Detector • Road Tech™ Quest Portable GPS Navigation System Receiver features include: • Electronic single in-line CD/MP3 player with track up/down, forward and reverse scan, repeat and random play functions. • CD/CDR/CDRW compatibility. • MPEG 2.5 Level III (MP3) file format compatability. • More than 10 hours of MP3 music - 150 MP3 songs (10 albums) on one 650MB disc. • Anti-skip protection (>40 second memory and mechanical dampers). • Remote controls for frequency tuning, band change, CD select, volume, and bass/treble/fader mixing. • Automatic Volume Control (AVC) - automatically adjusts volume to compensate for ambient noise due to motorcycle speed. • Time-of-day clock. • Weather band frequencies displayed as NOAA channel numbers (active on North American units only). FRONT PANEL CONTROLS hdtopic000532_1 See Figure 1. The front panel consists of a set of pushbuttons, a liquid crystal display, (LCD), a protective door for the Compact Disc (CD/MP3) slot and a covered input port for auxiliary (AUX) players. Six of the pushbuttons are "soft keys" whose function will change with the display. ON Press ON to turn the receiver on and off. 1, 2, 3, 4, 5/Left Arrow For the stereo receiver, the soft keys, 1, 2, 3, 4, and 5/Left Arrow, are used to store and then recall a selected radio frequency (pre-sets). When combined with any of the Advanced Audio System accessories, the function of any active soft key for that accessory will be displayed next to the soft key in the LCD display. Pressing the 6 soft key will return the display to the previous menu. For CB and Intercom Setup, the function of the 6 soft key will be displayed in the LCD next to the 6 soft key. 2006 Sound System 3 NOTE 5/Left, Up, Down, Right Arrows The 5/Left, Up, Down, and Right Arrow soft keys are used for radio band frequency tuning, Bass and Treble mixing, Fader and Volume. They are also used to scroll and highlight a selection in a list. For an Advanced Audio System accessory module, the arrow keys are active when arrows appear in the display. OK With the headsets/microphones plugged into the rider and/or passenger intercom sockets, the intercom is voice activated (VOX). NAV Active only with the Advanced Audio System accessory, NAV is the GPS positioning and turn-to-turn navigation setup button. Press the NAV pushbutton to display the navigational menu. With a menu or list item highlighted, press the OK pushbutton to confirm the selection and initiate the function. LCD COM The liquid crystal display (LCD) displays the operational status of the stereo receiver and that of any accessory. Active on the FLHTCU or on motorcycles equipped the Advanced Audio System CB accessory, COM is the Citizen Band (CB) setup button. See 2006 SOUND SYSTEM, CB Operation. Press the COM pushbutton to display the CB Setup menu. INT Active only on the FLHTCUI, INT is the intercom setup button. See 2006 SOUND SYSTEM, Intercom Operation. Press the INT pushbutton to display the Intercom Setup menu. 4 2006 Sound System CD Door The CD door is a spring-loaded cover and will stay open when exchanging CDs. Close the CD door after loading or unloading a CD. To close the door, push the door down until it latches. EJECT The CD EJECT button is found under the CD cover. Press the EJECT pushbutton to eject the CD. AUX The auxiliary input port under the AUX cover connects the receiver to an auxiliary device such as a cassette or MP3 player. Use a 1/8 in. (3.5 millimeter) male to male extension cord to plug the line out or headset out from the auxiliary device into the AUX port. AUX appears in the LCD as a mode selectable with the MODE SEL switch. The user has control of Bass, Treble, Fader and Volume. if so equipped, but all other player functions are performed with the auxiliary device. Set the volume level of the AUX device to normal or average. NOTE Close the protective cap whenever the AUX port is not in use. 2006 Sound System 5 om00505 12 11 1. 2. 3. 4. 5. 6. 10 Communications (CB) setup CD cover EJECT (under cover) OK (Confirm) Auxiliary connector cover Left (5), Up, Right, Down Arrow Keys 7. 8. 9. 10. 11. 12. Soft Keys (4, 5/Left Arrow, 6) Liquid crystal display (LCD) Soft keys (1, 2, 3) ON key GPS position and turn-to-turn navigation setup Intercom setup Figure 1. Advanced Audio System Front Panel hdgraphic000604h.xml 6 2006 Sound System LEFT HANDLEBAR CONTROLS hdtopic000533_1 The level is raised or lowered as long as the switch is held until the minimum or maximum level is reached. See Figure 2. Easy to operate while riding, audio controls are mounted on the left hand switch housing on the left handgrip. The LCD displays a horizontal dashed line to indicate the level. In the center of the line is a single thin dash. When the level is at the center, the selected audio is at a mid-point of its range. For FLHX and FLHTC: The left hand audio control is an +/AUDIO/- switch. For FLHTCU and FLTR: The left hand audio controls are a +/AUDIO/- and a PTT +/SQ/- switch. On FLTR models, the PTT +/SQ/- switch is inactive. +/AUDIO/- Switch AUDIO: See Figure 2. Press the AUDIO: switch to access the Audio/Setup menu on the LCD. Press and release AUDIO: or the press the soft key to toggle to the next displayed function in sequence from Bass, to Treble, to Fade, to Display, to Volume and then to to AVC. If the AUDIO switch is left on any selection the function automatically reverts back to the selected mode after approximately 2-3 seconds. +/-: Pressing the AUDIO switch upward (+) raises the level for the currently selected Audio/Setup (Bass, Treble, Fade, Volume or AVC). Pressing the switch downward (-) lowers the level. The Fade function is only available on FLHTCU models. Fade adjusts the balance between rider and passenger speakers. Pressing AUDIO upward (+) moves the balance to the front speakers while pressing AUDIO downward (-) moves the balance to the rear speakers. Equal volume in front and rear speakers is indicated by one horizontal single line in the center position. The Display function sets the illumination level of the characters in the LCD display. The AVC (Automatic Volume Control) function sets the volume level to compensate for the ambient noise associated with motorcycle speed. PTT and +/SQ/- Switch See Figure 2. Push-To-Talk (PTT) and the squelch control switch (+/SQ/-) is located on the left handlebar switch assembly. 2006 Sound System 7 NOTE om00511 The PTT and +/SQ/- is found on the FLHTCU Ultra Classic and the FLTR Road Glide models. On the FLTR, this switch is inoperative unless the optional CB, Hands-free phone (Bluetooth) or GMRS accessory module is installed. PTT: With the POWER on and the LCD indicating CB is active, press and hold the PTT switch to transmit over the channel displayed. Release PTT to end transmission. +/SQ/-: Lower the threshold to allow reception of CB signals by pressing the +/SQ/- switch toward the rear (-) or raise the threshold by pressing the +/SQ/- switch toward the front (+). 1. +/AUDIO/2. PTT / +/SQ/Figure 2. LH Audio Controls: FLHTC/I, FLHX/I Upper FLHTCU/I, FLTRI Lower hdgraphic000616d.xml 8 2006 Sound System RIGHT HANDLEBAR CONTROLS hdtopic000534_1 The LCD display indicates the function selected. See Figure 3. The mode select (MODE SEL) switch is located on the right handlebar switch assembly. In the receiver mode: UP/DN allows up or down radio station SEEK tuning. UP/MODE SEL/DN Switch In CD/MP3 mode: UP/DN changes tracks and performs fast advance and fast reverse. MODE SEL UP/DN In the CB mode: UP/DN changes the CB channel. With the radio power ON, press and release the MODE SEL switch to sequence between the radio bands. When a audio CD/MP3 disc is inserted into the CD player the CD function is added to the selections. When a 1/8 in. (3.5 mm) connector is plugged into the AUX input port the AUX function is added to the selections. In the Intercom mode: UP/DN changes the voice activated microphone (VOX) sensitivity. In the AUX mode: The UP/DN switch is inactive. For a detailed description of the various modes, see 2006 SOUND SYSTEM, Receiver Operation. Table 1. Receiver Frequency Bands hdtable000378b.xml MARKET BAND FREQUENCY STEPS Domestic AM 530-1700 kHz 10 kHz FM 87.75-107.9 MHz 200 kHz WB 162.400-162.550 MHz 25 kHz 2006 Sound System 9 Table 1. Receiver Frequency Bands hdtable000378b.xml MARKET International Japanese BAND FREQUENCY STEPS LW 144-279 kHz 3 kHz MW 531-1611 MHz 9 kHz FM 87.5-108 MHz 100 kHz MW 522-1629 MHz 9 kHz FM 76.0-91.0 MHz 100 kHz NOTE The intercom and CB can be activated at the same time with the receiver modes. The intercom and CB signals are passed to the audio circuits only if the signal strength exceeds the threshold established by CB squelch or VOX microphone sensitivity levels. Depending on the position of the speaker control switch in the fairing switch cap, the receiver function, the CB, and the VOX microphone can be heard in the headsets simultaneously. See 2006 SOUND SYSTEM, Intercom Operation and 2006 SOUND SYSTEM, CB Operation. 10 2006 Sound System RECEIVER OPERATION hdtopic000535_1 om00512 See Figure 1 for a picture of the stereo receiver front panel. Set Time-of-Day Set the time-of-day with the Ignition/headlamp Key Switch turned to IGNITION or ACCESS but with the stereo receiver OFF. Press the Set soft key (6) (Set) on the front panel to display the time setup menu. See A in Figure 4. To increase the hours in the display press the Hrs + soft key. To decease hours press the Hrs - soft key. When the hour is correct, release the soft key. To increase the minutes in the display press the Min + soft key. To decease hours press the Min - soft key. When the minute is correct, release the soft key. 1. UP/MODE SEL/DN 2. UP/MODE SEL/DN Figure 3. RH Audio Controls: FLHTC/I, FLHX Upper FLHTCUI, FLTRI Lower hdgraphic000617d.xml Turn Receiver ON/OFF To turn the receiver ON, turn the Ignition/headlamp Key Switch to IGNITION or ACCESS and press the ON button on the front panel. To turn the receiver OFF, press the ON button. If the receiver is ON when the ignition is turned OFF, the receiver will power up when the Ignition/headlamp Key Switch is turned to IGNITION. 2006 Sound System 11 Select a Frequency Band AM Using the right thumb, press the MODE SEL switch on the right hand grip and release to cycle to the desired frequency band (mode) or press the soft key next to the frequency band displayed in the LCD to select a frequency band. AM radio waves reflect off the ionosphere which results in consistent signal reception at a long range (up to 100 miles or 160 kilometers). See B in Figure 4. The LCD highlights the selected band. NOTE See Table 1When a CD/MP3 disc is present in the CD slot and/or an auxiliary player is plugged into the AUX port, the MODE SEL switch will cycle through the CD and AUX modes as well as the frequency bands. Volume See D in Figure 4. At any time the receiver is playing, the volume can be adjusted by pressing the AUDIO switch up to increase volume or down to decrease volume. AM vs FM Reception Commercial radio broadcasting is either AM (Amplitude Modulation) or FM (Frequency Modulation). 12 2006 Sound System However, AM radio can be displaced by loud humming, popping and crackling noises. This is electrical interference caused by noise from vehicle ignitions, electric signs, power lines and electrical storms. FM The advantages of FM radio are high fidelity sound, stereo reception, a wide range of broadcasting formats, and a signal that is free of electrical interference. The disadvantage of FM radio is its short range. FM radio waves travel in straight lines, called "line-of-sight," therefore, FM signals cannot be received over the horizon. At the limit of a station's range, the reception may fade in and out when objects pass between the transmitter and the motorcycle. FM Stereo vs FM Mono See E in Figure 4. Normally, the Harley-Davidson Integrated Sound System plays FM signals in stereo.The LCD will indicate STEREO. However, the stereo receiver has circuits which eliminate or minimize FM flutter due to weak stereo signals. The circuits detect a weak FM stereo signal and automatically blend it into a stronger FM mono signal. The transition is smooth and flutter free because it occurs over a range of signal conditions, rather than at a minimum threshold. Tuning-in a Radio Station When the system is automatically blending or is receiving an FM mono signal, the stereo indicator (STEREO) will disappear from LCD screen. Manual Tuning WB Press the Up Arrow button or the Down Arrow button to select the frequency in that direction. Hold the selected arrow key, and after a short delay of 1.5 seconds, the radio will continue to change frequencies until the selected arrow key is released. See G and H in Figure 4. Broadcast by the National Oceanic and Atmospheric Administration (NOAA) National Weather Band (WB) frequencies are available in North America only. To receive NOAA weather alerts while listening to other radio bands, highlight the Alerts indicator in the WB display by pressing the soft key. An alert tone will automatically switch the receiver to the announcing WB channel regarless of which frequency band is playing. When equipped with the CB module, use the soft key to highlight the Alert indicator in the LCD display weather alerts are announced over other audio and the Alert indicator is highlighted in the display. The radio has three tuning modes in each of the frequency bands: Manual, Seek, Preset Scan and Scan. Tuning in all three modes continuously wraps around the ends of the band. To manually tune the radio to a different frequency: SEEK Tuning See E in Figure 4. In SEEK, the radio tunes in to the next strong station. Press and release the MODE SEL switch up (UP) to tune in the next strong station upward in the band. Press and release the switch down (DN) to tune in the next strong station downward in the band. SCAN Tuning In SCAN, the radio continuously tunes from one strong station to the next until the SCAN is cancelled. 2006 Sound System 13 See F in Figure 4. Press and hold the MODE SEL switch UP or DN approximately 5 seconds to scan the band for strong station signals. Each strong station remains tuned in for 5 to 10 seconds before the radio scans to the next station. The receiver will continue to scan until cancelled. To select a station, cancel SCAN while the radio is tuned to that station. Press the MODE SEL switch UP or DN to cancel a SCAN moving up the band. Preset Memory/Tuning Use the soft keys, 1, 2, 3, 4, and 5/Left Arrow as preset buttons to store frequently tuned stations. NOTE To tune to a stored station, press and release the preset soft key. PRESET SCAN Tuning In PRESET SCAN, the radio continuously tunes from one preset station to the next until the PRESET SCAN is cancelled. A PSCAN icon will display while PRESET SCAN is active. In the FM band, press and hold the More soft key for approximately 3 seconds. Each preset station remains tuned in for 10 seconds before the radio moves to the next station. To select a station, cancel SCAN while the radio is tuned to that station. Press the MODE SEL switch UP or DN to cancel a SCAN moving down the band. See C in Figure 4. AM can store 5 preset frequencies. Adjusting Volume See E and F in Figure 4. Separate FM1 and FM2 bands allow the rider to store 2 sets of 5 preset FM frequencies (10 total). Use the More soft key to toggle between FM1 and FM2. The full range of FM frequencies can be selected in either FM1 or FM2. Volume can be adjusted in any radio band. To store a current station, press and hold any one of the preset buttons for 1.5 seconds. After an audible signal (a chirp), the station's frequency has been stored and will the frequency will appear in the display next to the preset soft key. See D in Figure 4. The LCD displays the word Volume and a bar graph that changes length with the volume. 14 2006 Sound System Volume is adjusted with the AUDIO switch on the left hand grip. Using left thumb, press the AUDIO switch up (+) to raise the volume or down (-) to lower the volume. Press the MODE SEL UP or DN to cancel the Audio/Setup display or wait 5 seconds after the AUDIO switch is released, the display switches to the currently selected frequency band. See K in Figure 4. Volume can also be adjusted in Audio/Setup. Use the MODE SEL switch to cycle to Volume and the AUDIO switch to raise (+) or lower (-) the volume. See J in Figure 4. The LCD displays the word Treble and a dashed line that changes length with the setting.The thin center dash indicates a middle setting. Mixing Bass and Treble Adjusting AVC Bass and treble range adjustments can be applied to any Integrated Sound System audio source. See L in Figure 4. Automatic Volume Control (AVC) automatically adjusts volume level to compensate for ambient noise associated with motorcycle speed. BASS: See I in Figure 4. Press AUDIO to display Bass Audio/Setup. Using the left thumb, press the AUDIO switch up (+) to increase the bass range or down (-) to lower the bass range. The LCD displays the word Bass and a dashed line that changes length with the setting. The thin center dash indicates a middle setting. TREBLE: See J in Figure 4. From Bass Audio/Setup, press AUDIO to sequence to the Treble. Using the left thumb, press the AUDIO switch up (+) to increase the treble range or down (-) to lower the treble range. If the AVC does not adequately compensate for ambient noise (or if it over compensates), enter the audio setup menu and select AVC. Compensation is adjusted with the AUDIO switch on the left hand grip. Using left thumb, press the AUDIO switch up (+) to raise the compensation level or down (-) to lower the compensation. NOTE Although the receiver AVC is preset at 3 bars, it is adjustable from 0 bars (OFF) to 4 bars. At 1 bar, the volume does not change with motorcycle speed. The more bars displayed, the higher the volume increases with speed. 2006 Sound System 15 om00501 Figure 4. FLHX, FLHTC and FLTR LCD Display Examples hdgraphic000634d.xml 16 2006 Sound System Adjusting Display Contrast om00516 See Figure 5. Select Display from the Audio/Setup menu with the AUDIO switch. Press the AUDIO up (+) to increase or down (-) to decrease the contrast of the characters in the display. NOTE The contrast can be decreased to render the characters invisible against the background. The characters will appear to have disappeared in the display. Before leaving the Display screen, always increase the character illumination to make the characters visible in other modes. Figure 5. Character Display Illumination hdgraphic000714c.xml 2006 Sound System 17 CD/MP3 OPERATION hdtopic000537_1 The CD player will accept commercial audio discs as well as compact discs recorded with MP3 (MPEG 2.5 Level III), files on compact disc read only (CDR) or compact disc read and write (CDRW) formats. Do not disassemble unit. Laser radiation is present if disc player is disassembled and the interlock fails or is defeated. Exposure to laser radiation could lead to death or serious injury. (00087a) Auto Load There are no serviceable parts inside the unit; leave all servicing to qualified service personnel. Disassembly of the unit could result in equipment damage and/or equipment malfunction. (00172a) Do not change compact discs while riding, and do not select a volume level that blocks out traffic noise. Distractions or a volume level that blocks out traffic noise, could cause loss of control resulting in death or serious injury. (00086a) 18 2006 Sound System With the receiver power ON, raise the CD door and gently insert a CD, label side up, into the CD slot until the unit automatically pulls the CD into the player. Close the CD door. See C in Figure 6. The receiver will automatically switch to CD operation. The CD track number and play time will appear in the LCD display. With a CD in the player, CD is added to the modes selectable with the MODE SEL switch. Set intercom volume level and other controls before riding to minimize adjustments on the road. Distractions can lead to loss of control, resulting in death or serious injury. (00088a) Disc Error 1 Tracks See B in Figure 6. If the CD loaded into the CD player is damaged, of incorrect format, or if upside down, the LCD will display the Disc Error 1 message. To change CD/MP3 tracks, use the right thumb and press and release the MODE SEL switch on the right hand grip. Press UP and release to select higher numbered tracks or press DN and release to select lower number tracks. Eject the CD. Refer to 2006 SOUND SYSTEM, Recommendations for Handling CDs. Eject Pressing the Up Arrow and Down Arrow keys will also advance tracks. NOTE The player automatically numbers the MP3 files found on a CD in alphabetical order. Do not change compact discs while riding, and do not select a volume level that blocks out traffic noise. Distractions or a volume level that blocks out traffic noise, could cause loss of control resulting in death or serious injury. (00086a) NOTE If the MODE SEL switch is pressed and held UP or DN longer than 1.5 seconds, the track selections will fast advance or reverse as long as the switch is held. Press the EJECT button found under the CD door to eject a CD. The CD will be partially ejected. Remove the CD. Close and latch the CD door. CD track selection wraps around the first and last track. The receiver will automatically return to the radio band and frequency playing when the CD was loaded and the CD mode is no longer selectable. To fast advance a track, press the MODE SEL switch UP and hold longer than 1.5 seconds. The current track will fast advance while the switch is pressed UP.The audio will advance to the subsequent track as long as the switch is held UP. Fast Advance and Reverse 2006 Sound System 19 See D in Figure 6. The play time display in the LCD will also fast advance. To fast reverse a track, press MODE SEL DN and hold longer than 1.5 seconds. The current track will fast reverse while the switch is pressed DN. The play time display in the LCD will also fast reverse. Random To play tracks randomly, press the Random soft key on the front panel while in the CD mode.The word Random will remain highlighted in the display. No selection is repeated until all other selections have been played. NOTE The Random soft key toggles between normal and Random play. Press once for random play. Press a second time to return to normal play. Pressing the MODE SEL switch UP or DNwill select different tracks at random. See D in Figure 6. Random will be highlighted in the display. Scan To scan the tracks on an CD/MP3 disk, press the Scan soft key. 20 2006 Sound System NOTE The tracks will play for 8 seconds and then jump to the next track which will play for 8 seconds. Upon selecting a track, press and release the MODE SEL switch to continue playing that track. Repeat To repeat a CD track while it is playing, press the soft key next to the Repeat display. To cancel Repeat, press the Repeat soft key again or press the MODE SEL switch UP or DN to change tracks. Repeat will no longer be highlighted in the display. MP3 The receiver CD player will automatically recognize and play MP3 files. NOTE The files will be numbered sequentially. om00513 RECOMMENDATIONS FOR HANDLING CDS hdtopic000375_1 • Use caution when handling a CD. Avoid touching the bottom (shiny) side. • Store audio CD/MP3 discs in acrylic jewel cases to protect against dust, scratches, light, and changes in humidity. • Store CDs in a cool dry place away from direct sunlight. • Store NAV discs in the original cases to protect against dust, scratches, light, and changes in humidity. While CD/MP3 discs are played through compensating software which reduces the effects of scratches and dust, NAV discs are data discs. A scratch will cause the Navigation module to miss data and give incorrect navigation directions. • Use commercially available cleaning tissue to clean the CDs. Never use solvents that can damage the CD. • Keep protective CD door closed at all times. Figure 6. CD/MP3 Display Examples hdgraphic000715d.xml 2006 Sound System 21 Features include: • Rider headset connector on fuel tank console. • Passenger headset connector on backrest. • Handlebar mounted rider push to talk (PTT/+/SQ/-) switch (CB and Intercom). • Fairing-mounted speaker switch. A laser that cannot focus properly may cause skipping. A clouded lens can be caused by dirty CDs, dust, smoke, high humidity, and airborne particles may cause the laser lens to cloud. Operating the CD without allowing the motorcycle to warm up can also cause a CD to skip. • Rear-mounted passenger UP/MODE SEL/DN and PTT/+/VOL/- switches (CB and Intercom). • Digitally adjustable rear headset speaker volume. • Passenger receiver band switching and frequency tuning. INTERCOM AND CITIZEN BAND WITH PASSENGER SPEAKERS hdtopic000538_1 • Passenger CD/MP3 player control. • Rider hand-held microphone compatibility for areas that prohibit headset (helmet-mounted) speakers. Do not disassemble unit. Laser radiation is present if disc player is disassembled and the interlock fails or is defeated. Exposure to laser radiation could lead to death or serious injury. (00087a) NOTE The FLHTCU supports includes a digitally tuned 40 channel Citizen Band (CB) transceiver, a rider/passenger intercom. 22 2006 Sound System HEADSETS AND SOCKETS hdtopic000551_1 Do not pull on the cord to remove the headset from the socket. Pull on the headset jack to disconnect the headset from the socket. (00174a) Some local governments prohibit or restrict the use of headset (helmet-mounted) speakers. Please check with local authorities and obey all applicable laws and regulations. (00173a) A Harley-Davidson dealer can help you select the correct genuine Harley-Davidson headsets and microphones for your year and model Harley-Davidson. Harley-Davidson stereo helmet headsets with 7 pin DIN jacks fit the rider and the passenger intercom sockets found on the FLHTCU. Other headset microphones will not work. The spring loaded hinge keeps the headset socket cap closed while riding. It protects against dirt and water when the headset or hand-held microphone is not in use. Before washing the motorcycle, verify that BOTH rider and passenger socket caps are closed. Open the socket cap and with the ridge on the headset jack facing upward insert the jack into either the front or rear headset socket. NOTE For areas that do not permit headset speakers, a special handheld microphone can be used to transmit over the CB. This microphone is also available through a Harley-Davidson dealer. 2006 Sound System 23 om00304 VOX MICROPHONES hdtopic000552_1 The Harley-Davidson intercom uses a voice-activated (VOX) microphone for hands-free intercom operation. The headset microphone minimizes the transmission of hand-held microphone generated noise. The intercom is activated when a voice or sound exceeds a preset audio level, the voice is said to "break VOX". The voice or sound is transmitted to the headsets. NOTE Pressing and holding the PTT switch will also open the microphone. Once VOX is broken, a conversation can proceed uninterrupted. After the absence of sound or voice, there is a delay of approximately 2 seconds before the microphone is deactivated. This delay in deactivation allows for pauses in conversation. Figure 7. Front Headset Socket Cap hdgraphic000335c.xml 24 2006 Sound System Because loud exhausts, passing trucks, car horns or other background sounds may unintentionally activate the intercom, the sound level necessary to break VOX is adjustable. See 2006 SOUND SYSTEM, Intercom Operation. SPEAKER CONTROLS hdtopic000553_1 om00520 SPKR Switch A three position speaker (SPKR) switch is located on the inner fairing cap of the FLHTCUI and the FLTRI. See Figure 6. ® NOTE The SPKR switch found on the FLTR is inoperable. Off/Forward: In the forward position, the speakers are off. Audio (radio, CD/MP3, AUX and CB) is played in the headsets only. During simultaneous CB reception, the other audio source is muted and only the CB is heard in the headsets. Center: In the center position, the radio, CD/MP3 player or AUX is played over the speakers while the CB is played only in the headsets. On/Rearward: In the rearward position, the speakers are on. With the SPKR indicator lit, the radio, the CD/MP3 player, or any AUX device and the CB are played through both the rider and passenger speakers. When a CB signal is received, other audio sources mute and the CB is played over the speakers. Refer to Table 4. NOTE The intercom is only heard in the headsets, regardless of the SPKR switch position. Figure 8. FLHTCU SPKR Switch hdgraphic000716c.xml Rider to Passenger Speaker Balance The receiver FADER control balances the front rider and rear passenger speakers. 2006 Sound System 25 NOTE FADER is available only on the FLHTCU equipped with rider front and passenger rear speakers. FADER: With the fairing speaker switch in either the SPKR or center position, press the AUDIO switch to cycle through Bass to Treble to Fade in the LCD. Or with the motorcycle stationary, press the left hand AUDIO switch once to enter the Bass display and select Fade with the Mode Select switch or the soft key. The LCD displays the word Fader and a dashed line that changes length left or right of a thin center dash.The thin center dash represents equal balance between rider and passenger speakers. See B in Figure 6. • Press the AUDIO switch up (+) to raise the volume from the rider speakers while lowering the volume from the passenger speakers. • Press the AUDIO switch down (-) to raise the volume from the passenger speakers while lowering the volume from the rider speakers. PASSENGER CONTROLS hdtopic000539_1 UP/MODE SEL/DN Switch See Figure 9. The passenger MODE SEL switch gives the passenger control of radio band selection, tuning, CD/MP3 operation and all functions of the hand grip mounted MODE SEL switch. NOTE For information on routing audio signals to the passenger speakers and headsets, refer to Table 4. PTT and +/VOL/- Switch See Figure 9. The PTT/+/VOL/- switch on the right side of speaker box allows the passenger to talk over the intercom or transmit over the CB as well as to raise or lower the rear headset volume. See F in Figure 11. When the rear headset volume is adjusted, a F (front) and R (rear) bar graph appear in the LCD display. NOTES • 26 2006 Sound System The passenger VOL switch affects only the passenger headset. The hand grip mounted AUDIO switch is the master volume control, and used in conjunction with the FADER, affects both the rider and passenger speaker volume. • With stereo receiver tuning, radio band selection, CD/MP3 track selection or other functions, simultaneous use of front and rear MODE SEL switches may cause operation to be suspended until either rider or passenger controls are released. 2006 Sound System 27 om00305 1. Passenger headset socket 2. UP/MODE SEL/DN 3. PTT/+/VOL/Figure 9. FLHTCU Passenger Controls hdgraphic000717d.xml 28 2006 Sound System SIDECAR CONTROLS hdtopic000540_1 om00522 See Figure 10. A MODE/+/TUNE/- press and tilt switch, a PTT/+/VOL/- press and tilt switch and a headset socket are mounted on the dash of the TLE Ultra sidecar for the FLHTCUI. These controls and stereo speakers of the sidecar are connected to the Premium Sound System through a wire harness. MODE and +/TUNE/- Switch The MODE/+/TUNE/- switch controls radio band selection, station tuning, and CD/MP3 track selection and operation. The MODE/+/TUNE/- switch operates like the hand grip mounted UP/MODE SEL/DN switch. PTT/+/VOL/The PTT/+/VOL/- press and tilt switch controls the volume in the sidecar speakers and is used to open the intercom and transmit over the CB. Pressing the PTT switch left (+) raises the volume level for the currently selected Audio. Pressing the switch right (-) lowers the volume level. 1. Headset socket 2. PTT/+/VOL/3. MODE SEL/+/TUNE/Figure 10. TLE Ultra Sidecar Audio Controls hdgraphic000718c.xml 2006 Sound System 29 Table 2. Speaker Output Power hdtable000379c.xml Activating the Intercom and the VOX Microphones MODEL TOTAL WATTS SPEAKERS OHMS PER SPEAKER Press and hold the INT button on the front panel, to open the Intercom Setup display. FLTRI FLHTC 40 2 speakers, 20 watts each See D in Figure 11. To activate the intercom (INT) and the VOX microphones, press soft key 1 to turn the intercom ON. FLHTCU 80 4 speakers, 20 watts each TLE Sidecar w/amplifier 40 2 speakers, 20 watts each INTERCOM OPERATION hdtopic000541_1 Operation To speak over the intercom, press and hold either rider or passenger PTT switch to enable the microphones. Both microphones are active while one or both PTT switches are pressed. NOTE Always verify that the CB is off so that private intercom conversations will not be transmitted. 30 2006 Sound System The intercom will activate in Intercom Setup with VOX sensitivity and headset volume level settings from the previous use. VOX sensitivity and headset volume are adjusted in Int Setup only. To exit Int Setup, press and release the MODE SEL switch or the INT button. To make adjustments to VOX sensitivity after exiting Intercom Setup, re-enter Intercom Setup by pressing INT. NOTE To ensure privacy, the intercom can only be heard through the headsets. To turn OFF the intercom and the VOX microphones, press the INT button to open the Intercom Setup display and press the On/Off soft key (1). Adjusting VOX Sensitivity VOX sensitivity should be adjusted so that the microphones break VOX at a normal voice level. Enter Intercom Seup by pressing the INT button. Press the ON or 1 soft key to turn the intercom on. See G in Figure 11. Press the MODE SEL switch UP or DN or press the 4 or 5 soft key to initiate the VOX display. The LCD displays VOX sensitivity as a bar graph. A higher number of bars indicates greater sensitivity while a lower number means less sensitivity. Continue to use MODE SEL on the right hand grip to adjust the sensitivity level. Press MODE SEL UP to make the microphone more sensitive. Press the MODE SEL DN to reduce sensitivity. To exit SETUP, press and release the MODE SEL switch. NOTES • The receiver retains the sensitivity level from the previous setup. However, if power is removed from the receiver, VOX sensitivity defaults to mid level. • VOX sensitivity may have to be adjusted if either microphone is unintentionally activated because the microphone misinterprets radio, road or background sound as conversation. When VOX is set to its maximum, the microphone is always open. The VOX display will read Open. When VOX is set to lowest value, the microphone is closed and the VOX display reads Closed. Adjusting Rider Headset Volume The rider intercom volume is only adjustable in Intercom Setup. See E in Figure 11. Enter Intercom Setup, speak into microphone and adjust the intercom volume with the AUDIO switch on the left hand grip. Press AUDIO + to raise the volume and AUDIO - to lower the volume. The LCD displays a dashed line that changes length with the level. See F in Figure 11. When the headset volume has been adjust to the bottom of its range, Mute will appear in the volume display. To exit Intercom Setup, press and release the MODE SEL switch. Set intercom volume level and other controls before riding to minimize adjustments on the road. Distractions can lead to loss of control, resulting in death or serious injury. (00088a) 2006 Sound System 31 Adjusting Passenger Headset Volume The passenger intercom volume is only adjustable in Intercom Setup. Enter Intercom Setup. Speak into the microphone and adjust the intercom volume with the AUDIO switch on the right speaker box on the passenger's backrest. Press AUDIO + to raise the volume and - to lower the volume. The LCD displays a bar graph that changes length with the level. See F in Figure 11. When the headset volume has been adjust to the bottom of its range, Mute will appear in the volume display. To exit Intercom Setup, press and release the MODE SEL switch or press the INT pushbutton. CB OPERATION hdtopic000542_1 Activating the CB See H and I in Figure 11. To activate the Citizen Band transceiver, press and release the COM pushbutton on the front panel. Press soft key 1 to turn the CB ON/OFF. The CB will activate in CB Setup with squelch threshold and channel settings from the previous use. CB channels are selected in CB Setup. To exit CB Setup but leave the receiver with the CB active, press and release the MODE SEL switch or the COM pushbutton. To turn the off the CB, press the COM button to enter CB Setup. Press soft key 1 to turn the CB ON and Off. There are no adjustments internal to the CB transceiver chassis that can be performed without risking non-compliance with Federal Communications Commission (FCC) rules. Refer to the original equipment manufacturer for any service required during the warranty period. For transmitter service after the warranty period, refer to a certified repair service. Any frequency determining components, such as crystals, or power determining semiconductors, etc., should only be replaced with the original component manufacturer's part or equivalent. Substitutes can result in violation of FCC rules. (00175a) Entering CB Setup See J in Figure 11. With the CB on, press COM to enter CB Setup. The LCD displays CB SETUP in the upper half and the CB channel appears in the lower half. To exit CB Setup, press and release the MODE SEL switch. 32 2006 Sound System After exiting CB Setup with the CB still active, re-enter CB Setup by pressing and releasing the COM soft key. exceed the threshold, they are said to "break squelch." Refer to Table 3. Selecting a Channel • In CB Setup, use the MODE SEL switch to select a CB channel. Press and release MODE SEL UP or DN to switch channels one at a time. To lower the threshold to process the weakest CB signals, press SQ - or rearward. • To raise the threshold to process stronger signals, press SQ + or forward. Soft keys 4, 5 and 6 can be used to preset CB channels. In the LCD, a dashed line changes length with the setting. If the MODE SEL switch is held up or down, tuning continuously wraps around the ends of the channels. See K in Figure 11. When squelch is broken, the CB in the display inverts. If the squelch is not broken and the another source is playing, CB is displayed. Set CB channel, squelch threshold and volume before riding to minimize adjustments on the road. Distractions can lead to loss of control, resulting in death or serious injury. (00089a) Adjusting Squelch Table 3. Squelch Control Switch hdtable000163b.xml SQ (-) REARWARD SQ (+) FORWARD More signals Fewer signals More noise Less noise More static Less static Unwanted signals Better sound quality Transmitting To transmit, press and hold the PTT switch. Transmission is over the CB channel displayed in the LCD. To end transmission, release PTT. See K in Figure 11. The CB signal is passed to the speakers or headsets only if signal strength exceeds the threshold set with the squelch control switch (PTT/+/SQ/-). When CB signals 2006 Sound System 33 Adjusting Volume CB Range Refer to Table 3. See L in Figure 11. To adjust volume of the CB in the speakers or headset, Press AUDIO + to raise the volume or -lower the volume. CB volume is adjustable when squelch is broken or when the dispaly is in CB Setup. Maximum transmission range can only be expected under stable weather conditions in flat, open country. A dashed line that changes length with the volume setting is displayed. Operating the CB radio without an antenna or with a broken antenna cable can result in damage to the transmitter circuitry. (00176a) 34 2006 Sound System Weather: In times of atmospheric disturbances, such as rain, snow, or even sunspots, the CBs range can be reduced. Terrain: Buildings, hills, valleys or any elevated objects or depressions that either block or create a longer path between transmitter and receiver will reduce or disrupt communications. Obstructions: Transmissions may be cut off under a viaduct or inside a tunnel or parking garage. NOTE The CB transmitter is the most powerful allowed under Federal law, but since there is no large steel area to create a ground plane, it may not transmit as strongly as when mounted in a car or truck. om00518 Figure 11. FLHTCU Display Examples hdgraphic000712d.xml 2006 Sound System 35 AUDIO ROUTING AND MIXING hdtopic000554_1 A single audio source routed to headset or speaker can be controlled with the riders AUDIO switch or the passenger VOL switch. General NOTE Refer to Table 4. Whether audio is routed to the headsets, speakers or both depends on the SPKR control switch and the INT and CB buttons on the receiver. The passenger volume control switch affects only the passenger headset. The handlebar mounted AUDIO switch is the master volume control, and used in conjunction with the fader, affects both the rider and passenger speaker volume. Table 4. Audio Routing and Mixing Combinations hdtable000164c.xml AUDIO ROUTING COMBINATIONS VOLUME CONTROL SPEAKER CONTROL SWITCH AUDIO SOURCE(S) AUDIO OUT AUDIO +/- OR VOL +/- Off or Forward (Headsets) Music* Headsets Music* CB Headsets CB (During reception or SETUP) Intercom Headsets Intercom (Only in SETUP) Intercom and music* Both in the headsets Music CB and music* CB in the headsets (Music is muted during CB reception) CB (During reception or SETUP) Intercom and CB Both in the headsets (Music is muted during CB reception) CB (During reception or Setup) 36 2006 Sound System Table 4. Audio Routing and Mixing Combinations hdtable000164c.xml AUDIO ROUTING COMBINATIONS VOLUME CONTROL SPEAKER CONTROL SWITCH AUDIO SOURCE(S) AUDIO OUT AUDIO +/- OR VOL +/- Center (Speakers and headsets) Music* Speakers Music* CB Headsets CB (During reception or SETUP) Intercom Headsets Intercom (Only in SETUP) Intercom and music* Intercom in the headsets Music* in the speakers Music* CB and music* CB in the headsets Music* in the speakers Music is muted during CB recption CB Intercom and CB Both in the headsets (Music is MUTED during CB reception) CB* 2006 Sound System 37 Table 4. Audio Routing and Mixing Combinations hdtable000164c.xml AUDIO ROUTING COMBINATIONS VOLUME CONTROL SPEAKER CONTROL SWITCH AUDIO SOURCE(S) AUDIO OUT AUDIO +/- OR VOL +/- On or rearward (Speakers) Music* Speakers Music* CB Speakers CB (During reception or SETUP) Intercom Headsets Intercom (Only in SETUP) Intercom and music* Intercom in the headsets. Music in the speakers. Music CB and music* CB in the speakers (When squelch is broken) CB Intercom and CB Intercom in the headsets (CB in the speakers MUTED during CB reception) CB * Music = Radio, CD player or auxiliary (AUX) audio source. 38 2006 Sound System TROUBLESHOOTING hdtopic000555_1 Radio Fuses Operational Troubleshooting If it is necessary to replace the radio fuses, follow the fuse replacement procedures in this manual or see your HarleyDavidson dealer for service. Refer to Table 5. Use the following table to identify rider or passenger control settings that prevent intended operation. NOTE See the Touring Models ELECTRICAL DIAGNOSTIC MANUAL for all system diagnosis and electrical troubleshooting information. There are no serviceable parts inside the unit; leave all servicing to qualified service personnel. Disassembly of the unit could result in equipment damage and/or equipment malfunction. (00172a) See Figure 12. Radio fuses are located in the fuse block under the left side cover. • The 10 amp fuse allows power to the radio through activation of an internal relay. • The 15 amp fuse provides direct and continuous power to the radio memory and time-of-day clock, and when the internal relay is activated, feeds the main circuits of the radio as well. Remove the radio fuses and inspect the element. Replace the fuse if the element is burned or broken. Automotive type ATO fuses are used. NOTE Do not disassemble unit. Laser radiation is present if disc player is disassembled and the interlock fails or is defeated. Exposure to laser radiation could lead to death or serious injury. (00087a) See Figure 12. Spare fuses (10 amp and 15 amp) can be found in the fuse block cover. 2006 Sound System 39 om00527 1. Radio power (10 Amp) 2. Radio memory (15 Amp) Figure 12. Radio Fuses hdgraphic000721c.xml 40 2006 Sound System Table 5. Operational Troubleshooting: Advanced Audio System hdtable000165e.xml THIS CAN PREVENT THIS Squelch broken Fairing music Headset music Passenger speaker music Squelch unbroken CB audio CB off or low volume CB audio Front or rear PTT on Fairing music Headset music Passenger speaker music CB audio Handlebar volume low Fairing music Headset music Passenger speaker music Passenger headset volume low Passenger headset music and CB audio Fairing SPKR back to speaker Headset music and headset CB audio Fairing SPKR forward to headset Fairing music and CB audio INT off Voice communications (Unless PTT is pressed) 2006 Sound System 41 NOTES 42 2006 Sound System C CB Operation Activating the CB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Adjusting Squelch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Adjusting Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CB Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Entering SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Selecting a Channel. . . . . . . . . . . . . . . . . . . . . . . . . . 33 Transmitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 CB Transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 CD Operation Auto Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 CD Eject. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Disc Error 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Fast Advance and Reverse. . . . . . . . . . . . . . . . . . . . . 19 MP3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Tracks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Fader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Fairing Controls SPKR Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Front Panel Controls AUX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CD/MP3 Door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INDEX Advanced Audio System Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Audio Routing and Mixing. . . . . . . . . . . . . . . . . . . . . . 36 CB Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 CB Transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Fader Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Fairing Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handling CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Headsets and Sockets. . . . . . . . . . . . . . . . . . . . . . . . . 23 Intercom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Intercom Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Left Handlebar Controls. . . . . . . . . . . . . . . . . . . . . . . . . 7 Passenger Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Passenger Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . 22 Receiver Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Receiver Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Rider to Passenger Speaker Balance. . . . . . . . . . . . . 25 Right Handlebar Controls. . . . . . . . . . . . . . . . . . . . . . . 9 Sidecar Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 VOX Microphones. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Audio Routing and Mixing General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CD/MP3 EJECT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 COM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Left, Up, Down, Right Arrows. . . . . . . . . . . . . . . . . . . . 4 NAV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 OK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Soft Key 1, 2, 3, 4, 5. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Soft Key 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Handling CDs Audio CDs (MP3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 NAV CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Headsets and Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Intercom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Intercom Operation Activating the Intercom. . . . . . . . . . . . . . . . . . . . . . . . 30 Adjusting Passenger Headset Volume. . . . . . . . . . . . . 32 Adjusting Rider Headset Volume. . . . . . . . . . . . . . . . . 31 Adjusting VOX Sensitivity. . . . . . . . . . . . . . . . . . . . . . 31 Left Handlebar Controls +/AUDIO/- Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PTT and +/SQ/- Switch. . . . . . . . . . . . . . . . . . . . . . . . . 7 MP3 (MPEG 2.5 Level III). . . . . . . . . . . . . . . . . . . . . . . . . . 18 Passenger Controls PTT and +/VOL/- Switch. . . . . . . . . . . . . . . . . . . . . . . 26 UP/MODE SEL/DN Switch. . . . . . . . . . . . . . . . . . . . . 26 Passenger Headset Volume. . . . . . . . . . . . . . . . . . . . . . . . 32 Passenger Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Receiver Operation Adjusting AVC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Adjusting Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 AM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 AM vs FM Reception. . . . . . . . . . . . . . . . . . . . . . . . . . 12 AM vs FM Reception. . . . . . . . . . . . . . . . . . . . . . . . . . 12 Display Contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 FM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 FM Stereo vs FM Mono. . . . . . . . . . . . . . . . . . . . . . . . 12 Mixing Bass and Treble. . . . . . . . . . . . . . . . . . . . . . . . 15 Preset Memory/Tuning. . . . . . . . . . . . . . . . . . . . . . . . 14 PRESET SCAN Tuning. . . . . . . . . . . . . . . . . . . . . . . . 14 SCAN Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SEEK Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Selecting a Frequency Band. . . . . . . . . . . . . . . . . . . . 12 Setting Time-of-Day. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Tuning-in a Radio Station. . . . . . . . . . . . . . . . . . . . . . 13 Turning Receiver ON/OFF. . . . . . . . . . . . . . . . . . . . . . 11 WB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Rider to Passenger Speaker Balance. . . . . . . . . . . . . . . . . 25 Right Handlebar Controls UP/MODE and SEL/DN Switch. . . . . . . . . . . . . . . . . . . 9 Sidecar Controls MODE and +/TUNE/- Switch. . . . . . . . . . . . . . . . . . . . 29 PTT/+/VOL/-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 SPKR Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Troubleshooting Operational Troubleshooting. . . . . . . . . . . . . . . . . . . . 39 Radio Fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 VOX Microphones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 NOTES STRIP-IN LANGUAGE SPECIFIC ALARM CARD FRONT HERE STRIP-IN LANGUAGE SPECIFIC ALARM CARD BACK HERE VEHICLE V.I.N.: CRANKCASE NO.: OWNER’S NAME: Important Information If you move from your present address at any time after purchasing your new Harley-Davidson or if you sell it to anyone, please fill out the attached card and mail immediately. This will provide us with an accurate registration as required by Federal law. OLD ADDRESS: APT. NO.: CITY: STATE: DEALER NUMBER: DELIVERY DATE: DEALER’S NAME: CITY: STATE: ZIP CODE: MY NEW ADDRESS IS: NEW ADDRESS: Thank You! ZIP CODE: CITY: APT. NO.: STATE: ZIP CODE: MY MOTORCYCLE SOLD TO: NEW OWNER’S NAME: DATE OF SALE: ADDRESS: CITY: APT. NO.: STATE: ZIP CODE: Back of Reply card goes here
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 58 Page Mode : UseOutlines XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:69fbcc6d-7b4d-4cb7-a010-68e5318f5500 Producer : XEP PDF Generator – RenderX, Inc. Modify Date : 2005:04:08 11:52:47-07:00 Create Date : 2005:03:21 15:16:09Z Creator Tool : XEP 3.8.4 Server Metadata Date : 2005:04:08 11:52:47-07:00 Document ID : uuid:f9ef7de0-7289-426c-ba82-c7d4f6af44fc Format : application/pdf Title : 10002-06 Creator : Dept 625 Service Communications Description : Radio Manual Author : Dept 625 Service Communications Keywords : ©2005, H-D. Subject : Radio ManualEXIF Metadata provided by EXIF.tools