Midland Radio LXT420 FRS/ GMRS Combination User Manual LXT420 Owner s Manual qxp

Midland Radio Corporation FRS/ GMRS Combination LXT420 Owner s Manual qxp

Contents

users manual

LXT320/420 Series GMRS/FRS RadioX-TRA TALK®OWNER'S MANUALwww.midlandradio.com
®Model LXT320/420 SeriesPage 2 www.midlandradio.comTABLE OF CONTENTS 2Introduction 3Important Notice, FCC Licensing 4LCD Display 5Controls 5Battery Installation 6Installing the Belt Clip 6Charging the Optional Battery Pack 7Low Battery Level Indicator 7Operating Your Radio 8 - 13External Speaker/Microphone Jack 13Troubleshooting Guide 14Use and Care 14Specifications and Frequency Charts 15-16Warranty Information 17MIDLAND Family Products 18Accessories 18Accessories Order Form 19
®Page 3 www.midlandradio.comWelcome to the world of Midland electronicsCongratulations on your purchase of a high quality MIDLAND product.Your 2-way radio represents the state-of-the-art in high-techengineering. Designed for GMRS (General Mobile Radio Service)operation, this compact package is big in performance. It is a qualitypiece of electronic equipment, skillfully constructed with the finestcomponents. The circuitry is all solid-state and mounted on a ruggedprinted circuit board. Your two-way radio is designed for reliable andtrouble-free performance for years to come.Features- 22 GMRS/FRS Channel - 121 Privacy Codes (38 CTCSS / 83 DCS)- eVOX- Selectable CALL Tone - Weather (WX) Band Receiver- Weather (WX) Alert - VIBRATE ALERT (LXT420 Series only)- SCAN Function- MONITOR Function- Roger Beep Tone- Silent Operation- Key Pad Lock- Power High / Mid / Low Settings- Speaker / Microphone Jacks- Battery Meter / Battery Low IndicatorThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions : (1) this device does not cause harmful interference, and(2) this radio must accept any interference that may cause undesired operation.To maintain compliance with FCC’s RF exposure guidelines, for body-wornoperation, this radio has been tested and meets the FCC RF exposure guidelineswhen used with Midland Radio Corp. accessories supplied or designated for thisproduct. Use of other accessories may not ensure compliance with FCC RFexposure guidelines. (Tested with Headset Model: AVP-1)Model LXT320/420 Series
®Page 4 www.midlandradio.comIMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATIONThe LXT320/420 Series operates on GMRS (General Mobile Radio Service) fre-quencies which require an FCC (Federal Communications Commission) license.You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which com-prise the GMRS channels of the LXT320/420 Series. Serious penalties couldresult for unlicensed use of GMRS channels, in violation of FCC rules, as stipu-lated in the Communications Act's Sections 501 and 502 (amended).You will be issued a call sign by the FCC which should be used for stationidentification when operating the radio on GMRS channels. You should alsocooperate by engaging in permissible transmissions only, avoiding channelinterference with other GMRS users, and being prudent with the length of theirtransmission time.To obtain a license or ask questions about the license application, contact theFCC at 1-888-CALL FCC or go to the FCC's website:www.fcc.gov/services/personal/generalmobile/licensing.htmlExposure To Radio Frequency EnergyYour Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human being to radiofrequency electromagnetic energy:- United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J- American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992- Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition- National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986- International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998To control your exposure and ensure compliance with the general population oruncontrolled environment exposure limits, transmit no more than 50% of the time.The radio generates measurable RF energy exposure only when transmitting.Model LXT320/420 SeriesIMPORTANT: Changes or modifications to this unit not expressly approved byMIDLAND RADIO CORP. could void your right to operate this unit. Your radio is setup to transmit a regulated signal on an assigned frequency. It is against the law toalter or adjust the settings inside the COMMUNICATOR to exceed thoselimitations. Any adjustment to your radio must be made by qualified technicians.
®Page 5 www.midlandradio.com-TRA ALKXTMENUCONTROLSLCD DISPLAY 1. KEY LOCK ICON – Indicates KEYLOCK mode is on.2. eVOX – Indicates when eVOX mode isactive.3. WX BAND ICON – Indicates when theradio is in Weather Band mode.4. CHANNEL NUMBER – Changes from1~22 on GMRS/FRS band (1~10 onWX band).5. PRIVACY CODE – Indicates PrivacyCode selected by user (oF~38/oF~83).6. BATTERY METER – Indicates thebattery level.7. VIBRATE-ALERT ICON – Indicates when the Vibrate-Alert (LXT420 Seriesonly) feature is on. 8. RECEIVE (RX) ICON – Indicates radiois receiving a transmission. 9. TRANSMIT (TX) ICON – Indicatesradio is transmitting a signal.10. TRANSMIT POWER LEVEL ICON –Indicates TX Power setting (H/L)11. PRIVACY CODE ICON – IndicatesPrivacy Code setting (CTCSS/DCS).11. PTT Button – Press and hold to transmitvoice communication. 12. CALL/LOCK Button – Press to send aCALL tone signal. Press and hold to turnKEY LOCK on/off.13. MIC – Built-in microphone.14. SPEAKER – Built-in speaker.15. ANTENNA.16. EXTERNAL SPEAKER/MIC/CHG. JACK17. POWER / MENU Button – Press andhold for at least 3 seconds to turn theradio on/off. Press momentarily toaccess Menu mode. 18. MONITOR/SCAN Button – Press toenter SCAN mode. Press and hold toenter MONITOR mode19. UP and DOWN Button – Makeadjustments in MENU mode.12345678910111213141918171615Model LXT320/420 Series11
®Page 6 www.midlandradio.comBATTERY INSTALLATIONYour LXT320/420 Series radio operates with either 4 AAA alkalinebatteries or an optional NiMH battery pack. The belt clip should beremoved (see below) to ease installation or removal of the batteries. To install the batteries:1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio.2. Insert 4 AAA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit.3. Return the Battery Cover by sliding it up on the radio. Replace thebelt clip, making sure it locks into place.BATTERYCOMPARTMENTBATTERYCOMPARTMENTCOVERPress here and push down to openModel LXT320/420 SeriesINSTALLING THE BELT CLIPTo install the BELT CLIP, slide the clip down into the slot on the backof the radio until the BELT CLIP LATCH clicks. To remove the BELTCLIP, press the LOCK TAB down , then gently pull the belt clip uptoward the top of the radio.BELT CLIPLOCK TABBELT CLIP LATCH
®Page 7 www.midlandradio.comCHARGING THE OPTIONAL BATTERY PACKYour LXT320/420 Series is equipped for using an optional recharge-able NiMH battery pack which can be recharged by inserting the ACadapter into the radio charge jack, or with optional desktop charger(as described below). Initial charge time is 24 hours. Charge time isabout 12 hours thereafter. For maximum battery life, we recommendcharging the battery pack when the low battery icon comes on.Remove the radios from the charger when the charge time expires.To charge using a Desktop Charger:1. Place the rechargeable battery packs in the radios.2. Connect the AC adapter into an AC wall outlet.3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in vehicle) into the desktop charger jack.4. Place the units into the desktop charger slot and note that the LEDindicator with RED color will light up, indicating charging function. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours.1. Only use our NiMH battery pack.2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio.3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio.BATTERY LEVEL INDICATORYour LXT320/420 Series has a BATTERY LEVEL METERthat shows the battery power level. The greater the number of barsvisible, the stronger the battery level. When the battery level is low,the last bar and “Lo bt” will flash in the display indicating yourbatteries should be replaced or recharged if using a rechargeablebattery pack.Model LXT320/420 Series!
POWER ON/OFF AND VOLUME Press the POWER/MENU button for at least 3 seconds to turn theradio on/off. During Power On, the radio will beep 3 times withdifferent tones, the LCD will display a “self-test” message for 1second and the LCD display will indicate the last channel selected. To increase/decrease the volume level, press the button duringRX or STANDBY mode. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the samechannel and Privacy Code.1. For maximum clarity, hold the radio 2 to 3 inches from your mouth.2. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting.3. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission.ABOUT RANGEYour LXT Series radios are designed to give you maximum rangeunder optimum conditions.Optimum Conditions are: lOver waterlOpen rural areas without obstructionslFlat areas where you can see the other personTo ensure you get maximum range:lBe sure to use fresh or fully charged batteries - low batteries will cause low power conditionslBe sure you are on a GMRS channel - FRS channels are restricted by the FCC to low powerlBe sure to set your radio to use Hi power.®Page 8 www.midlandradio.comOPERATING YOUR RADIOModel LXT320/420 Series/
®Page 9 www.midlandradio.comLXT320/420 SERIES QUICK REFERENCE CHARTMONITOR Pressing and holding the MONITOR button for 1 second will let youhear noise so you can adjust the volume level of the radio when notreceiving a signal. This should be used to check activity on yourcurrent channel before transmitting. Press and hold the MONITOR button for 1 second again to get outof MONITOR mode.SCAN Your LX320/420 Series can scan all 22 channels for activity. To enter,quickly press the SCAN button. Repeat the same procedure to exit.Your radio will rapidly scan each of the 22 channels and stop on anyactive channel for 5 seconds before resuming scan.When you press the PTT button to transmit on an active channel, thescanning function will stop and remain on the active channel. Toresume scanning, quickly press the SCAN button.CALL TONEYour LXT320/420 Series can transmit a call tone for a fixed length oftime. To send a call tone, press the CALL button. The TX icon willappear while transmitting a call tone and a tone can be heard on thespeaker for confirmation. KEYPAD LOCK To avoid accidentally changing the radio setting, press the LOCKbutton for 4 seconds. The KEY LOCK icon will appear on the display.PTT and CALL will still be active. Repeat the same procedure tounlock the keypad.Model LXT320/420 SeriesMENU Channel eVOX1~22PrivacyRoger BeepOn/OffPowerH/M/LCall Tone1~5VibrateOn/OffWX Channel1~10Press Menubutton whenWX Band isONSilent OperationOn/OffoF/1/2/3OffCTCSSDCS1~381~83WX AlertOn/OffWX BandOn/Off LXT420Series only
®Page 10 www.midlandradio.comCHANNEL SELECTION (GMRS/FRS BAND)Press the MENU button once, and then the buttons to select oneof the 22 GMRS/FRS channels. To confirm the selection, press thePTT button or press the MENU button again to move to the nextfeature setting.SETTING PRIVACY CODES Your LXT320/420 Series has 121 Privacy Codes available. Theselected Privacy Code may be different for each channel. To select aPrivacy Code for the current channel press the MENU button twice,and then the buttons to select between “Off/CTCSS/DCS”.Press again the MENU button and the button to select one ofthe 38 CTCSS Codes or one of the 83 DCS Codes. The PrivacyCode icon on the display will indicate whether you set your PrivacyCode in CTCSS or DCS mode. To confirm the selection, press thePTT button or press MENU button again to move to the next featuresetting.Note : Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two LXT320/420 Series radios,all radios in your group must be set to the same channel and Privacy Code selections.TRANSMIT (TX) POWER LEVEL SELECTIONYour LXT320/420 has 2 power level settings. To select the power levelon channels 1~7 and 15~22, press the MENU button four times, a “Pr”icon will appear blinking on the display. Then press the buttonsto select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm,press the PTT button or press MENU button again to move to the nextfeature setting. When the PTT button is pressed during LowBattery Level condition, the TX Power will automatically switchfrom Hi(H) to Lo(L) level.Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations./Model LXT320/420 Series/!/!/
®Page 11 www.midlandradio.comeVOX Your LXT320/420 Series has 2 eVOX level settings: (oF/1/2).To set eVOX, press the MENU button five times. The display shows“VOX” blinking while on the right of the CHANNEL NUMBER display,an “oF” icon appears. Select “1” or “2” by pressing the buttonsand push the PTT key, or press MENU button again to move to thenext feature setting. eVOX will be more sensitive on the “2”setting than on the “1”setting.To turn eVOX off, press the MENU button four times. The displayshows “VOX” blinking while on the right of the CHANNEL NUMBERdisplay, a “1” or “2” icon appears. Select “oF” by pressing thebuttons and push the PTT key, or press MENU button again tomove to the next feature setting.VIBRATE ALERT (LXT420 Series only) To turn the VIBRATE ALERT on, press the MENU button six times sothe display will show the VIBRATE-ALERT icon blinking, while on theright of the CHANNEL NUMBER, an “oF” icon appears. Select “on”by pressing the buttons and push the PTT button, or press MENUbutton again to move to the next feature setting. The VIBRATEALERT icon will remain on the display.To turn the VIBRATE ALERT off, press the MENU button five times,so the display will show the VIBRATE ALERT icon blinking, while onthe right of the CHANNEL NUMBER, an “on” icon appears. Select“oF” by pressing the buttons and push the PTT button, or pressMENU button to move to the next feature setting. The VIBRATEALERT icon will go off.ROGER BEEP (end of transmission) TONE When the PTT button is released, the radio will beep to confirm toother users that your transmission has finished. To turn the ROGER BEEP tone on, press the MENU button until thedisplay shows an “rb” icon while on the right of the “rb” display, an“oF” icon appears. Select “on” by pressing the buttons and pushthe PTT key, or press MENU button to move to the next featuresetting. To turn the ROGER BEEP tone off, press the MENU button until thedisplay shows an “rb” icon while on the right of the “rb” display, an“on” icon appears. Select “oF” by pressing the buttons and pushthe PTT key, or press MENU button to move to the next featuresetting.Model LXT320/420 Series//////
®Page 12 www.midlandradio.comCALL TONE SELECTION Your LXT320/420 Series has 5 selectable CALL TONES.To select, press the MENU button until a “CA” icon appears and to theright of the “CA” icon the current CALL TONE setting is displayed.Then press the buttons to make the CALL TONE selections - theradio will emit a corresponding tone for each selection. To confirm,press the PTT button or press MENU button to move to the next fea-ture setting.SILENT OPERATION Your LXT320/420 Series has a SILENT OPERATION mode. In thismode, all “beeps” and “tones” are disabled. To turn the SILENT OPERATION mode on, press the MENU buttonuntil the display shows an “bP” icon while on the right of the “bP”display, an “on” icon appears. Select “of” by pressing the buttonsand push the PTT key or MENU button. To turn the SILENT OPERATION mode off, press the MENU buttonuntil the display shows an “bP” icon while on the right of the “bP”display, an “oF” icon appears. Select “on” by pressing the buttonsand push the PTT key or MENU button. WEATHER (WX) BAND RECEIVERYour LXT320/420 Series has a WEATHER (WX) BAND RECEIVERfunction, to enable user to receive weather reports from designatedNOAA stations.To turn the WEATHER (WX) RECEIVER on, press the MENU buttonuntil the WX Band icon appear while in the right an “oF” iconappears. Select “on” by pressing the buttons and push the MENUbutton to confirm. The display will show the current WX Band channelsetting. While on WX Band mode press the MENU button once, andthen the buttons to select one of the 10 WEATHER (WX) BANDchannels.To turn the WEATHER (WX) RECEIVER off, press the PTT button.Model LXT320/420 Series/////
®Page 13 www.midlandradio.comWEATHER (WX) ALERTYour LXT320/420 has a WEATHER (WX) ALERT function, to enableyou to automatically receive weather alert from designated NOAAstations. To turn the WEATHER (WX) ALERT on, press the MENU button twicewhile in WX Band. The display shows "AL", while on the right an"oF" icon appears blinking. Select "on" by pressing the buttons.To confirm, press the PTT button or press MENU. The radio will returnto WX BAND and the WX BAND icon will continue blinking. If theradio receives a WX ALERT signal from a designated NOAA stationwhile on GMRS/FRS Radio mode, the radio will beep for 10 secondswhile an "AL" and "In" icon appear on the display, after which willautomatically go to WX BAND. If any button is pressed during beeping while on GMRS/FRS Radiomode, the radio will automatically go to WX BAND.EXTERNAL SPEAKER/MICROPHONE JACK :Your LXT320/420 Series can be used with an optional externalspeaker/microphone or headset, freeing your hands for other tasks. Touse an optional speaker / microphone or headset:lInsert the plug(s) into the SPK/MIC jackslPlace the earbud into your ear, and adjust themic into your desired position.Model LXT320/420 Series/
®Page 14 www.midlandradio.comPROBLEM SOLUTIONNo Power - Check battery installation and/or replace batteriesCannot ReceiveMessages - Confirm the radios have the same channel and Privacy Code settings.- Make sure that you are within range of the other transceivers.- Buildings and other structures may interfere with your communication. (See ABOUT RANGE on Page 8)Radio is not respondingto button presses - Make sure key lock is not on. See "Keypad Lock" (Page 9).- Radio might need to be reset. Turn radio off then on.- Ensure accessory microphone is set properlyDisplay is dim - Recharge or replace batteries.Charger not functioning - Contacts on the back of the radio may require cleaning. - Ensure the outlet where the charger is plugged into is functioning properly.- Check that the battery pack is installed in the radio properly.USE AND CARE :1. Use a soft damp cloth to clean the radio2. Do not use alcohol or cleaning solutions to clean the radio.3. Do not immerse the radio in water.4. Dry the radio with dry lint-free cloth should it get wet.5. Turn off the radio and remove the batteries during long-term storage.If you have a problem which you believe requires service, pleasecall first and speak with a service technician. Many problems canbe remedied over the phone without returning the unit forservice.Model LXT320/420 SeriesTROUBLESHOOTING GUIDE
®Page 15 www.midlandradio.comSPECIFICATIONSChannels 22 GMRS/FRS Channels +121 Privacy Codes10 Weather (WX) Band Channels Operating Frequency UHF 462.5500 ~ 467.7125 MHzPower Source 4 AAA Alkaline or 4.8V Rechargeable Ni-MH battery packGMRS/FRS FREQUENCY CHART (MHz)CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq. 1 462.5625 9 467.5875 17 462.6000 2 462.5875 10 467.6125 18 462.6250 3 462.6125 11 467.6375 19 462.6500 4 462.6375 12 467.6625 20 462.6750 5 462.6625 13 467.6875 21 462.7000 6 462.6875 14 467.7125 22 462.7250 7 462.7125 15 462.5500 8 467.5625 16 462.5750 (LXT310/350/410/435 Series) WEATHER (WX) RECEIVER FREQUENCY CHART (MHz)CH. No CH. Freq. CH. No CH. Freq. 1 162.550 6 162.500 2 162.400 7 162.525 3 162.475 8 161.650 4 162.425 9 161.775 5 162.450 10 163.275 PRIVACY CODES FREQUENCY CHART (Hz)Code Freq. Code Freq. Code Freq. Code Freq. Code Freq. 1 67.0 9 91.5 17 118.8 25 156.7 33 210.7 2 71.9 10 94.8 18 123.0 26 162.2 34 218.1 3 74.4 11 97.4 19 127.3 27 167.9 35 225.7 4 77.0 12 100.0 20 131.8 28 173.8 36 233.6 5 79.7 13 103.5 21 136.5 29 179.9 37 241.8 6 82.5 14 107.2 22 141.3 30 186.2 38 250.3 7 85.4 15 110.9 23 146.2 31 192.8 8 88.5 16 114.8 24 151.4 32 203.5 * Channel 8,9 and 10 are designated Canadian Marine Frequencies* Channels 8~14 are low-power FRS license free channelsNote: Privacy codes can be programmed for use on any channelModel LXT320/420 Series
®Page 16 www.midlandradio.comModel LXT320/420 SeriesDCS PRIVACY CODE CHART No. CODE No. CODE No. CODE 1 023 29 174 57 445 2 025 30 205 58 464 3 026 31 223 59 465 4 031 32 226 60 466 5 032 33 243 61 503 6 043 34 244 62 506 7 047 35 245 63 516 8 051 36 251 64 532 9 054 37 261 65 546 10 065 38 263 66 565 11 071 39 265 67 606 12 072 40 271 68 612 13 073 41 306 69 624 14 074 42 311 70 627 15 114 43 315 71 631 16 115 44 331 72 632 17 116 45 343 73 654 18 125 46 346 74 662 19 131 47 351 75 664 20 132 48 364 76 703 21 134 49 365 77 712 22 143 50 371 78 723 23 152 51 411 79 731 24 155 52 412 80 732 25 156 53 413 81 734 26 162 54 423 82 743 27 165 55 431 83 754 28 172 56 432 - - Note: Privacy codes can be programmed for use on any channel
®Page 17 www.midlandradio.comLIMITED WARRANTY Midland Radio Corporation will repair or replace, at its option withoutcharge, any Midland FRS/GMRS transceiver which fails due to adefect in material or workmanship within Three Years following theinitial consumer purchase. This warranty does not apply to waterdamage, battery leak or abuse.This warranty does not include any carrying cases, earphones, orantennas, which may be a part of or included with the warrantedproduct, or the cost of labor for removal or re-installation of theproduct in a vehicle or other mounting.Performance of any obligation under this warranty may be obtained byreturning the warranted product, freight prepaid, along with proof ofpurchase to:Midland Radio CorporationWarranty Service Department5900 Parretta DriveKansas City, MO 64120This warranty gives you specific legal rights, and you may also haveother rights, which vary from state to state.Note : The above warranty applies only to merchandise purchased inthe United States of America or any of the territories or possessionsthereof, or from a U.S. Military exchange.Midland Radio Corporation5900 Parretta DriveKansas City, MO 64120Tel: (816) 241-8500E-mail: mail@midlandradio.comURL: www.midlandradio.comModel LXT320/420 Series
®Page 18 www.midlandradio.comModel LXT320/420 SeriesACCESSORIESAccessories can be purchased at www.midlandradio.com or fill inthe form on the following page and mail it to our address.AVP-1AVP-6- 2 Over the Ear Mic. Headsets w/ PTT- $19.95- 1 Dual Desk Charger- 2 Rechargeable battery packs- 1 AC Adapter- 1 DC Cigarette lighter adapter- $39.95
®Model LXT320/420 SeriesPage 19 www.midlandradio.comPlease send Money Order or fill in Visa/MasterCard information andmail to the address below. Please DO NOT send cash or checks.Make Money Order to Midland Radio Corporation.Name: _____________________________________________________Address: ___________________________________________________City: _____________________ State _____Zip Code _____________Tel: ______________________ email: ___________________________CC# _____________________ Type: __________ Exp. ____________ACCESSORIES ORDER FORMQty Item Price TotalAVP-1 $19.95AVP-6 $39.95Mail To:Midland Radio CorporationConsumer. Dept.5900 Parretta DriveKansas City, MO 64120----------------Or Call 816.241.8500. ----------------To order online go to www.midlandradio.comSub-Total ___________Tax (MO, CO, IL, FL only) ___________S & H (U.S. only) _____ $14.95Total $___________
MMIIDDLLAANNDD RRAADDIIOO CCOORRPPOORRAATTIIOONN5900 Parretta DriveKansas City, MO 64120Call 816.241.8500visit us at http://www.midlandradio.comNote: Features & Specifications are subject to change without notice.MIDLAND is not responsible for unintentional errors or omissions on itspackaging.
Safety Information For GMRS UNIT Your wireless handheld portable transceiver contains a low power transmitter. When the Push-to Talk(PTT) button is pushed it sends out radio frequency (RF) signals. This device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices. Important Note: To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. If you wear the handset on your body while using the headset accessory, use only the manufacturers supplied belt clip for this product and ensure that the antenna is at least 1 inch(2.5 centimeters) from your body when transmitting. Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.

Navigation menu