Miele and Cie KG EI8800 wireless network interface User Manual Miele EHS Device Specification

Miele & Cie. KG wireless network interface Miele EHS Device Specification

User Manual

Miele@home Manual for EI8800-A and EI7800 USA/CDN Market Version 1.2
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 2 of 8 Revision History Date Version Description Author Department 09.09.2014 1.0 Draft Initial manual for FCC/IC F. Laube GTE/SKT 23.09.2014 1.1 Final manual IC Statement in France Technical data update F. Laube GTE/SKT 29.09.2014 1.2 Added RF Parameter Power Radiated Test Report 6-0196-12-1-2b Clause 5.5 F. Laube GTE/SKT Reviewed By Date Version Name Department 09.09.2014 1.0 Draft G. Borgelt GTE/TL 23.09.2014 1.1 G. Borgelt GTE/TL 29.09.2014 1.2 G. Borgelt GTE/TL Approvals Date Version Name Department
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 3 of 8 Contents 1. General 4 2. Technical data 4 3. Norms / Standards 5 3.1 FCC / IC 5 3.2 Safety 5 3.3 RF-Standard 5 3.4 Photos and Labels 5 4. Regulatory Notice 7 4.1 United States (FCC Notice) 7 4.2 Canada (IC Notice) 8
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 4 of 8 1. General The EI7800 and EI8800-A are wireless network interface modules for Miele home appliances like hoods, hobs, cooling devices or washing machines. The modules are supporting the IEEE 802.15.4 ZigBee protocol. The EI8800-A is a module for build in appliances during manufacturing. The EI7800 is a wireless stick which is connected to the appliance by the customer or customer service. Both modules depend on the same wireless design with a single chip transceiver. The EI7800 has additional components for power supply and UART driver. 5V to 3,3V Voltage Regulator5V to 3,3V Uart DriverSingleChipZigBee-TransceiverPCB-Antenna with antenna-NetworkHome appliance InterfaceEI 7800SingleChipZigBee-TransceiverPCB-Antenna with antenna-NetworkHome appliance Interface3,3V VCCEI 8800 2. Technical data VCC in V EI8800-A EI7800 3,3 5,0 Max. Current in mA EI8800-A EI7800 50 Current in A 0.06 ambient temperature in°C EI8800-A EI7800 0 – 85 0 - 50 Humidity max 93% non condensation Dimensions in mm EI8800-A EI7800 Wire (EI8800) 30/27 82,5/40,0/23,5 325 wireless MCU/RF IC CC2530 Antenna type PCB inverted F Crystal Input Clock in MHz 32 Frequency 2.4 GHz Channels 11 - 26 Channel Frequencys 2,405 GHz – 2,480 GHz (5MHz distance) Bandwidth 2,83 MHz Transmission Power in mW <8
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 5 of 8 3. Norms / Standards 3.1 FCC / IC FCC Regulation Part 15.109, Part 15.209 and Part 15.247 IC regulations RSS-Gen Issue 3 and RSS-210 Issue 8 3.2 Safety UL 60730-1A, CAN/CSA E60730-1:02+A1:2007 CSA Certificate 70009686 3.3 RF-Standard The modules use the RF standard IEEE 802.15.4. 3.4 Photos and Labels EI7800 product EI7800 Internal EI7800 Label side view
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 6 of 8 EI8800-A Top View EI8800-A integrated in home appliance steering device
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 7 of 8 4. Regulatory Notice 4.1 United States (FCC Notice) FCC ID: 2ACUWEI7800 FCC ID: 2ACUWEI8800 In accordance with FCC Part 15, the 2ACUWEI8800 is listed as a Modular Transmitter Device. FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that cause undesired operation. FCC STATEMENT: This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a different circuit from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. USERS MANUAL OF THE END PRODUCT: The end user has to be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the user’s manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT (only for EI8800-A): The final end product must be labeled in a visible area with the following " Contains FCC ID: 2ACUWEI8800 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Manual for EI 7800/EI8800-A USA/CDN Version: 1.2 EI8800-A EI7800 Date: 29/09/2014 Manual_EI7800_EI8800-A_USA_CDN_1.2.docx  2014 Miele&Cie. KG Page 8 of 8 4.2 Canada (IC Notice) IC: 5669C-EI7800 IC: 5669C-EI8800 The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. LABEL OF THE END PRODUCT (only EI8800-A): The final end product must be labeled in a visible area with the following " Contains IC : 5669C-EI8800". This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu