Miele Little Giant Pw 6065 Specification Sheet Deckblatt 6055 + 6065_Elektro_GB

: Miele Miele-Little-Giant-Pw-6065-Specification-Sheet-748606 miele-little-giant-pw-6065-specification-sheet-748606 miele pdf

Open the PDF directly: View PDF .
Page Count: 11

Download
Open PDF In Browser	View PDF

Installationsplan / Installation plan
Installatietekening
Plano de instalación
Plan d`installation
Plano de instalação
Piano di installazione Σχέδιο εγκατάστασης

Asennusohje
Installasjonsplan
Installationsplan

G

PW 6055 + PW 6065 AV/LP

Materialnummer
Änderungsstand
Datum Zeichnung
Datum Legende

/
/
/
/

Mat. no.:
Version:
Drawing date:
Legend date:

06 664 230
00
25.04.2005
02.05.2005

Technical datasheet

PW 6055/PW 6065 AV/LP
Electric (EL)

Washer-extractor
Heating:

Legend:

Circled, bold-type abbreviations:
Connection required

G

Abbreviations surrounded by broken circle:
Connection optional or required, depending on model

Optional extras:
UM

BS

Miele plinth

UG/UO 5005
(UG = Box plinth/UO = Open plinth)
Height Model
Width UG (UO)
Depth UG (UO)

mm
mm
mm

300
609
622

mm
mm
mm
mm

300
70
600
650

1. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

2N AC 400
50
5.5
2 × 16
4 × 1.5
2000

Alternative voltage
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

1N AC 230
50
2.85
1 × 16
3 × 1.5
2000

2. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

2N AC 400
50
5.5
2 × 13
4 × 1.5
2000

Alternative voltage
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

1N AC 230
50
2.85
1 × 13
3 × 1.5
2000

V
Hz
kW
A
mm²
mm

1N AC 230
50
5.5
1 × 25
3 × 2.5
2000

Concrete platform Concrete platform optional (Min. quality B15)
Recommended height
Minimum height
Recommended width
Recommended depth
Ensure good anchorage!

(598)
(615)

Electrical
connection

convertible

Machine connections:

G

3. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead with plug (supplied)

convertible

Country variations:

Installationsplan PW 6055/PW 6065 AV/LP EL
Stand: 02.05.2005

Seite 8

B

V
Hz
kW
A
mm²
mm

3N AC 400
50
4.8
3 × 10
5 × 1.5
2000

5. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

2N AC 400
50
5.5
2 × 16
4 × 1.5
2000

Alternative voltage
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

convertible

S

4. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

1N AC 230
50
2,85
1 × 16
4 × 1.5
2000

convertible

a j

V
Hz
kW
A
mm²
mm

3 AC 230
50
5.5
3 × 20
4 × 2.5
2000

Alternative voltage
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (not supplied)

N

6. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead with plug (supplied)

V
Hz
kW
A
mm²
mm

1N AC 230
50
3.2
1 × 16
3 × 1.5
2000

W

7. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead with plug (supplied)

V
Hz
kW
A
mm²
mm

1N AC 230 - 240
50
5.5 – 6.0
1 × 25
3 × 2.5
2000

J

8. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead with plug (supplied)

V
Hz
kW
A
mm²
mm

2 AC 200
50-60
3.75
2 × 20
3 × 2.75
2000

9. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

2 AC 208
60
3.95
2 × 20
4 AWG 10
2000

U l

Non-standard voltages:

OS 230

1. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

3 AC 230
60
4.4
3 × 16
4 × 1.5
2000

OS 400

2. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

3 AC 400
50
4.2
3 × 16
4 × 1.5
2000

Installationsplan PW 6055/PW 6065 AV/LP EL
Stand: 02.05.2005

Seite 9

OS 440

3. Standard voltage (as supplied)
Frequency
Rated load
Fuse rating
Connection cable, min. cross-section
Length of supply lead (supplied)

V
Hz
kW
A
mm²
mm

3 AC 440
60
5.05
3 × 16
4 × 1.5
2000

kPa
kPa
l/min
Inch
mm

100
1000
10
(11)
¾" external thread
1500

l/h

approx. 36

°C
kPa
kPa
l/min
Inch
mm

70
100
1000
11
¾" external thread
1500

l/h

approx. 13

kPa
kPa
l/min
Inch
mm

100
1000
11
¾" external thread
1500

Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
PW 6055
(PW 6065)

l/h

approx. 14

When using an alternative water supply, the following
volumes can be deducted from hot or cold water supplies:
Deduction from cold water requirements
PW 6055
Deduction from hot water requirements
PW 6055

l/h
l/h

approx. 4
approx. 10

Max. temperature
Machine drain connection (dext × s × l) [DN 70]
On-site drain connection (dint × s × l) [DN 70 sleeve]
Max. transient throughput

°C
mm
mm
l/min

70
75 × 1.9 × 40
75 × 1.9 × 50
50

Plug and socket connection in accordance with IEC 60309
recommended to facilitate electrical safety tests.
Install mains isolator according to IEC 60947 on hard-wired
connection.
Wall socket or mains isolator must be accessible after
installation.
The use of an earth leakage circuit breaker (ELCB) is strongly
recommended. If an ELCB is fitted, it must be a Type B RCD
able to cope with rectified three-phase supplies.
If necessary, equipotential bonding with good galvanic contact
must be provided in accordance with all appropriate national
and local regulations.
Cold water

Min. flow pressure
Max. pressure
Max. throughput (if hot water supply is not available)
On-site connection thread according to DIN 44 991
Length of connection hose (parts supplied: 1 connection
hose)
Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
PW 6055
(PW 6065)
Additional requirements if hot water supply is not available.

Hot water

Max. temperature
Min. flow pressure
Max. pressure
Max. throughput
On-site connection thread according to DIN 44 991
Length of connection hose (parts supplied: 1 connection
hose)
Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
PW 6055
(PW 6065)
In absence of hot water, use blind stopper supplied and
reprogramme controls to cold water intake.

Alternative water
supply
(Optional)

Drainage via
dump valve

Min. flow pressure
Max. pressure
Max. throughput (if hot water supply is not available)
On-site connection thread according to DIN 44 991
Length of connection hose (parts supplied: 1 connection
hose)

Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.

Installationsplan PW 6055/PW 6065 AV/LP EL
Stand: 02.05.2005

Seite 10

Drainage via
drain pump

Max. temperature
Drain hose (Int. dia. × wall thickness × l) [DN 22]
Hose sleeve for drain hose to be provided on site (ext. dia. x l)
Max. transient throughput
Max. head height (measured from base of unit)

°C
mm
mm
l/min
mm

70
22 × 6 × 1500
22 × 30
26
1000

Fittings (supplied) Miele plinth UG/UO 5005
4 × metal angled brackets (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
Machine must be secured if installation is on plinth!
Fixing materials for floating screed floor to be provided on site

mm
mm

8 × 65
12 × 60

On concrete platform
2 × metal brackets
2 × screws DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
Machine must be secured if installation is on plinth!
Fixing materials for floating screed floor to be provided on site

mm
mm

6 × 50
8 × 40

mm
mm
mm
mm
mm
kg
N
N
N
Hz
W

595
700
850
600 × 1000
1100
104 (105)
2820
1380
1455
1365
24
250

Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.

Payment system

Possible
extensions

Machine data

The following extensions are possible:
Installation of payment system
Installation as washer-dryer stack
Liquid dispensing
Connection to serial interface, RS 232
Width
Depth
Height
Knocked-down dimensions (W × H)
Minimum rear wall gap (measured to front of machine)
Net weight PW 6055 (PW 6065)
Dynamic floor load, max.
Max. static load PW 6055 (PW 6065)
Dynamic load, max.
Drum frequency, max.
Average heat dissipation
(dependent on ambient room temperature and programme
selected)

Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Measurements in mm

Installationsplan PW 6055/PW 6065 AV/LP EL
Stand: 02.05.2005

Seite 11



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2005:07:06 07:29:01Z
Modify Date                     : 2011:05:04 10:53:33-04:00
Metadata Date                   : 2011:05:04 10:53:33-04:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Creator                         : thage
Title                           : Microsoft Word - Deckblatt PW 6055 + 6065_Elektro_GB.doc
Document ID                     : uuid:7fb58fcf-c62b-4bb4-9e12-f0eb31ca3711
Instance ID                     : uuid:ce8c0108-ff1c-418f-b359-f1a4df84f214
Has XFA                         : No
Page Count                      : 11
Author                          : thage

EXIF Metadata provided by EXIF.tools