Mikasa Automobile Parts Mtx 60 Users Manual MTX60 Rev 3 043010

2015-02-09

: Mikasa Mikasa-Mikasa-Automobile-Parts-Mtx-60-Users-Manual-556078 mikasa-mikasa-automobile-parts-mtx-60-users-manual-556078 mikasa pdf

Open the PDF directly: View PDF .
Page Count: 66

Download
Open PDF In Browser	View PDF

OPERATION AND PARTS MANUAL

SERIES

MODEL MTX-60
TAMPING RAMMER
(HONDA GX100UKRBF GASOLINE ENGINE)

Revision #6 (08/23/11)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

PROPOSITION 65 WARNING

PAGE 2 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

NOTES

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 3

TABLE OF CONTENTS

MTX-60 Rammer

Honda GX100KRBF Engine

Proposition 65 Warning ........................................... 2
Table Of Contents ................................................... 4
Parts Ordering Procedures ..................................... 5
Safety Information ................................................ 6-9
General Information .............................................. 10
Specifications ........................................................ 11
Controls And Components .................................... 12
Basic Engine ......................................................... 13
Operation ......................................................... 14-16
Maintenance ......................................................... 17
Troubleshooting ............................................... 18-19
Explanation Of Code In Remarks Column ............ 20
Suggested Spare Parts ......................................... 21

Cylinder Barrel Assembly. ................................ 36-37
Crankcase Cover Assembly. ............................ 38-39
Crankshaft Assembly. ....................................... 40-41
Piston/Connecting Rod Assembly..................... 42-43
Camshaft Assembly. ......................................... 44-45
Recoil Starter Assembly. .................................. 46-47
Fan Cover Assembly. ........................................ 48-49
Carburetor Assy (S/N T-3423 and Below) ........ 50-51
Carburetor Assy (S/N T-3424 and Above) ........ 52-53
Air Cleaner Assembly. ...................................... 54-55
Muffler Assembly. ............................................. 56-57
Flywheel Ignition Assembly. ............................. 58-59
Control Assembly. ............................................. 60-61
Labels Assembly. .............................................. 62-63

Component Drawings
Nameplate And Decals..................................... 22-23
Crankcase And Engine Assembly..................... 24-25
Crankcase And Engine Assembly..................... 26-27
Guide Cylinder Assembly. ................................ 28-29
Foot Assembly. ................................................. 30-31
Fuel Tank And Handle Assembly. ..................... 32-33
Combination Lever Assembly. .......................... 34-35

Terms And Conditions Of Sale — Parts ................ 64

Specification and part number are
subject to change without notice.

PAGE 4 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

www.multiquip.com

PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Order via Internet (Dealers Only):

Best Deal!

Effective:
January 1st, 2006

If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.

Order parts on-line using Multiquip’s SmartEquip website!
N View Parts Diagrams
N Order Parts
N Print Specification Information

To obtain an MQ Account, contact your
District Sales Manager for more information.

Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*

Goto www.multiquip.com and click on
Order Parts to log in and save!

Note: Discounts Are Subject To Change

Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)

Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Note: Discounts Are Subject To Change

Order via Phone: Domestic (US) Dealers Call:
1-800-427-1244

Non-Dealer Customers:
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.

International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.

When ordering parts, please supply:
R
R
R
R
R
R

Dealer Account Number
Dealer Name and Address
Shipping Address (if different than billing address)
Return Fax Number
Applicable Model Number
Quantity, Part Number and Description of Each Part

Specify Preferred Method of Shipment:
UPS/Fed Ex
DHL
N Priority One
Truck
N Ground
N Next Day
N Second/Third Day

NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 5

SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.

Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.

SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others. The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER, WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.

PAGE 6 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

SAFETY INFORMATION
GENERAL SAFETY
CAUTION
NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.

ALWAYS know the location of the nearest phone or keep a
phone on the job site. Also, know the phone numbers of
the nearest ambulance, doctor and fire department. This
information will be invaluable in the case of an emergency.

RAMMER SAFETY
DANGER
NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
NEVER operate this equipment under the influence of
drugs or alcohol.

ALWAYS check the equipment for loosened threads or
bolts before starting.
DO NOT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
NEVER use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
ALWAYS know the location of the nearest
fire extinguisher.
ALWAYS know the location of the nearest
first aid kit.

NEVER operate the equipment in an explosive
atmosphere or near combustible materials. An
explosion or fire could result causing severe
bodily harm or even death.
WARNING
NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death. Disconnection of any of these
devices will void all warranties.
DO NOT use this machine on ground that is harder than
the machine can handle, or for driving pilings or tamping
rock beds. Furthermore, use of the machine on sloping
ground, such as the side of an embankment, may make
the machine unstable and can cause an accident. It can
also result in premature machine wear due to uneven
loads on the machine.
Use the machine with confidence for tamping earth and
sand, soil, gravel, and asphalt. DO NOT use the machine
for other types of jobs.
CAUTION
NEVER lubricate components or attempt service on a
running machine.
NOTICE
ALWAYS keep the machine in proper running condition.
Fix damage to machine and replace any broken parts
immediately.
ALWAYS store equipment properly when it is not being
used. Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 7

SAFETY INFORMATION
ENGINE SAFETY
DANGER
The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.

FUEL SAFETY
DANGER
DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.

The engine of this equipment
requires an adequate free flow
of cooling air. NEVER operate
this equipment in any enclosed
or narrow area where free flow
of the air is restricted. If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WARNING
DO NOT place hands or fingers inside engine
compartment when engine is running.
NEVER operate the engine with heat shields or
guards removed.
DO NOT remove the engine oil drain plug
while the engine is hot. Hot oil will gush
out of the oil tank and severely scald any
persons in the general area of the rammer.
CAUTION
NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to cool
before servicing equipment.
NOTICE
NEVER run engine without an air filter or with a dirty air
filter. Severe engine damage may occur. Service air filter
frequently to prevent engine malfunction.
NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.

DO NOT start the engine near spilled fuel or combustible
fluids. Fuel is extremely flammable and its vapors can
cause an explosion if ignited.
ALWAYS refuel in a well-ventilated area, away from
sparks and open flames.
ALWAYS use extreme caution when working with
flammable liquids.
DO NOT fill the fuel tank while the engine is running
or hot.
DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
NEVER use fuel as a cleaning agent.
DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.

PAGE 8 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

SAFETY INFORMATION
TRANSPORTING SAFETY
CAUTION
NEVER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
ALWAYS shutdown engine before transporting.
NEVER lift the equipment while the engine is running.
Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
Use adequate lifting cable (wire or rope) of sufficient
strength.
Use one point suspension hook and lift straight
upwards.
DO NOT lift machine to unnecessary heights.
ALWAYS tie down equipment during transport by
securing the equipment with rope.
Never allow any person or animal to stand underneath the
equipment while lifting.

ENVIRONMENTAL SAFETY
NOTICE
Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 9

GENERAL INFORMATION
DEFINITION OF TAMPING RAMMER
The Mikasa MTX-60 tamping rammer is a powerful
compacting tool capable of applying a tremendous force
in consecutive impacts to a soil surface. Its applications
include soil compacting for road, embankments and
reservoirs as well as backfilling for gas pipelines, water
pipelines and cable installation work.
The impact force of the MTX-60 levels and uniformly
compacts voids between soil particles to increase dry
density.
Circular motion is converted to create impact force. The
MTX-60 tamping rammer develops a powerful compacting
force at the foot of the rammer. To maintain optimum
performance, proper operation and service are essential.

CONSTRUCTION OF TAMPING RAMMER
The Mikasa MTX-60 is equipped with an air cooled, fourcycle gasoline engine. Transmission of the power takes
place by increasing the engine speed to engage the
centrifugal clutch.

RAMMER GEARBOX AND SPRING CYLINDER
The Mikasa MTX-60 uses an oil bath lubrication system.
Always check the oil level through the oil level sight glass
at the rear of the tamper foot.

CAUTION — Handle Operation
Before starting operation check the
lifting handle to:

1. Make sure that there is no damage on the bolts.
2. Make sure that there is no crack or breakage on
handle.
3. Make sure that there is no fissure on the surface. If
there is any abnormality or damage, replace with
new one.
For operation:
This handle is to be used to lift up the shoe part of the
machine with the body laid down on the ground or truck
bed.
1. Use proper lifting techniques to avoid back injury.
This handle is for manual lifting only.
2. Do not use this handle as a rammer lift point. Use
the lifting point on the top of the machine.
3. Do not move the rammer with the lifting handle and
the front rollers more than 16 feet (5 meters).

CONTROLS
Before starting the MTX-60 Tamping Rammer identify and
understand the function of the controls.

PAGE 10 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

SPECIFICATIONS
Table 1. MTX-60 Rammer Specifications
Overall Height

38.8 in. (985 mm)

Overall Width

13.8 in. (350 mm)

Over Length

28.1 in. (713 mm)

Shoe Size (Wx L)

10.4 x 13.4 in. (265 x 340 mm)

Fuel Tank Capacity

2.1 qt. (2 liters)

Lubrication Oil Capacity

0.69 qt. (0.65 liter)

No. of Blows

644 - 695 vpm (10.7 - 11.6 Hz)

Impact Force

3,060 lbf (13.6 kN)

Impact Plate Stroke

2 - 3.2 in. (50 - 80 mm)

Operating Weight

141 lbs. (64 kg)

Measured Sound Power Level

103 dB

Guaranteed Sound Power Level

107 dB

Max. Sound Pressure Level

92 dB

Table 2. Engine Specifications
Model

Honda GX100UKRBF Engine

Type

Air-Cooled 4 Stroke, Overhead camshaft,
single cylinder gasoline engine

Piston Displacement

6.0 cu.in. (98 cc)

Max. Output

3.0 hp/3,600 rpm (2.2 KW)

Max. Governed Speed, No Load

3,800 - 4,100 rpm

Cooling System

Air-Cooled

Engine Oil Capacity

0.3 qt. (0.28 liters)

Fuel

Unleaded gasoline

Lubricant for Engine

Automobile Oil; Class SE or higher

Star ting System

Recoil Star ter

Spark Plug Type

NGK CR5HSB

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 11

CONTROLS AND COMPONENTS
3
10

5
9
6

11
7

12
13

Figure 1. MTX-60 Rammer

Figure 1 shows the location of the controls and components for the MTX-60 Tamping Rammer. The functions of
each control is described below:
1. Combination (Throttle) Lever – Used to adjust
engine speed (rpm). Move lever forward (SLOW) to
reduce engine speed, move lever back toward operator
(FAST) to increase speed. Always operate the rammer
at full speed (rpm).
2. Handle – To operate rammer, GRIP handle assembly
firmly on both sides.
3. Fuel Tank Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tightened
securely. DO NOT over fill.
4. Hook – Used to lift rammer for transporting.

5. Air Cleaner Cover – Protects the air cleaner which
prevents dirt and other debris from entering the engine.
6. Roller – Allows rammer to be moved around easily by
rolling the unit.
7. Bellows – Reservoir for oil bath.
8. Foot – Laminated wood with tempered steel plate for
superior shock absorption.

9. Fuel Tank – Holds the fuel for the unit (up to 3.2 quarts)
10. Muffler – reduces the noise of the engine when running.
11. Engine – this unit uses a Honda GX100UKRBF
gasoline engine.
12. Oil Gauge (Sight Glass) – Indicates the level of oil in the
oil bath reservoir.
13. Drain Valve – Open this valve to remove oil from the
bellows.

WARNING — Fuel Hazard
Adding fuel to the tank should be
accomplished only when the
engine is stopped and has had an
opportunity to cool down. In the
event of a fuel spill, DO NOT
attempt to start the engine until the
fuel residue has been completely
wiped up, and the area surrounding
the engine is dry.

PAGE 12 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

BASIC ENGINE

Figure 2. Engine Controls and Components
(Honda GX100)

The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the
engine manufacturer's manual for detailed operation and
service information.
1. Choke Lever – Normally used in starting the engine
in cold weather conditions. In cold weather, turn the
choke lever to the fully closed position. In warm
weather, set the choke lever halfway or completely
open.
2. Spark Plug – Provides spark to the ignition system.
Set spark plug gap to 0.024 - 0.028 inch (0.6 - 0.7 mm).
Clean spark plug once a week.
3. Recoil Starter (pull rope) – Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.

4. Muffler – Used to reduce noise and emissions.
5. Dipstick/Oil Filler Cap – Remove this cap to
determine if the engine oil is low. Add oil through this
filler port as recommended in Table 3.
6. Oil Drain Plug – Remove this plug to remove oil from
the engine's crankcase.

WARNING — Hot Engine
Engine components can generate
extreme heat. To prevent burns, DO
NOT touch these areas while the
engine is running or immediately
after operating. NEVER operate the
engine with the muffler removed.

Operating the engine without an air
filter, with a damaged air filter, or a
filter in need of replacement will allow
dirt to enter the engine, causing rapid
engine wear.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 13

OPERATION
This section is intended to assist the operator with the initial start-up of the MTX-60 Tamping Rammer. It is extremely
important that this section be read carefully before attempting to operate the rammer.
DO NOT use your rammer until this section is thoroughly
understood.

CAUTION — Understand Operation
Failure to understand the operation of the Tamping
Rammer could result in severe damage to the unit or
personal injury.

ENGINE
1. Fill the fuel tank (Figure 3) with unleaded gasoline. At
the same time, check the engine oil and make it a habit
to replenish it often (Figure 4).

FUEL
TANK

RAMMER CRANKCASE AND SPRING CYLINDER
OIL BATH
This unit uses an oil bath lubrication system. Perform the
following:
1. Check the oil level through the oil level sight glass
(Figure 2) at the rear of the tamper foot.

Figure 3. Fuel Tank

OIL LEVEL
DIPSTICK

OIL FILL PLUG
SIGHT GLASS
OIL DRAIN PLUG
Figure 4. Engine Oil Dipstick

2. Low levels of oil may result in engine seizure due to
high levels of consumption during operations.
Figure 2. Foot Housing Sight Glass

2. If oil is not visible, add 10W-30 SE, SF or higher grade
motor oil into the oil fill plug opening (Figure 2). The
bath contains approximately 1.7 pints (800 cc.)

The oil level should be kept at the half
way point of the sight glass.

3. Check the engine oil level and if the engine oil level is
low, it should be refilled. Use the proper motor oil as
suggested in the Table 3 below.
Table 3. Motor Oil Grade
Season or Temperature

Grade of motor oil
(higher than MS class)

Spring, Summer or Autumn
+120° F to +15° F

SAE 30

Winter
+40° F to +15° F

SAE 30

Below +15° F

SAE 10W-30

PAGE 14 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

OPERATION
INSPECTION
1. Check all nuts, bolts fasteners for tightness. Retighten
as necessary.
2. Clean any dirt from the recoil starter and foot pedestal.
Wipe the entire unit clean before operating.
3. Replace any missing or damaged Safety Operation
decals.
4. Adjust height of handle. Adjust handle by loosening
nuts and moving handle to suit operation. Retighten
nuts.

DO NOT press the primer pump bulb
more than four (4) times, as this will cause
fuel to flood the carburetor.
3. Place the choke lever to the closed position. When the
weather is cold, close the choke all the way. When it is
hot, or if the engine is hot, open the choke a little or
leave it fully open.

CHOKE LEVER
(CLOSED POSITION)

INITIAL START-UP
When starting the MTX-60 Tamping Rammer perform the
following:
1. Slide the throttle lever from the stop to the idle position
( ) (Figure 5). This opens the fuel cock and the engine
electrical circuit is turned on automatically.

Figure 6. Choke Lever

4. Grip the starter rope handle (Figure 7) and pull it until
you feel a slight resistance. Then pull sharply and
quickly. Return the handle to the starter case before
releasing.

THROTTLE LEVER
(IDLE POSITION)

STARTER
ROPE

Figure 5-A. Throttle Lever (Idle Position)

2. Units with Carburetor Primer System: Push the
primer pump bulb four (4) times to deliver fuel to the
carburetor (Figure 5-B).

Figure 7. Recoil Starter

5. If engine fails to start, move the choke lever (Figure
6) to the half open position to avoid flooding.
6. Repeat steps 1 thru 5.
7. If the engine does not start after repeated attempts,do
the following:
a. Check fuel delivery from fuel tank to carburetor.
b. Check for restrictions to fuel flow at in-tank filter.
c. Check for restrictions to fuel flow at in-line filter.
Figure 5-B. Primer Pump

d. Inspect spark plug for contamination and proper gap.
Clean, adjust or replace spark plug as required.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 15

OPERATION
OPERATION

STOPPING THE ENGINE

1. To start the rammer tamping action, move the throttle
lever (Figure 8) quickly from IDLE to the START
( ) position. DO NOT move the throttle lever slowly
as this may cause damage to the clutch or spring.

1. Move throttle lever quickly from the START to IDLE
position (Figure 9) and run the engine for three minutes
at low speed. After the engine cools, move the throttle
lever to the STOP position (Figure 10). The engine will
stop and the fuel cock is automatically closed.

THROTTLE LEVER
(START POSITION)

THROTTLE LEVER
(STOP POSITION)

Figure 8. Throttle Lever (Start Position)
Figure 10. Throttle Lever (Stop Position)

CAUTION — Operate at Full Speed
Make sure that the throttle lever is moved to the FULL
START position. Operating the rammer at less than full
speed can result in damage to the clutch springs or
foot.

2. If the engine does not stop due to a problem with the
switch or the like, move the machine to a safe location
and hold the throttle lever in the stop position. Let the
machine run on idle and the machine will stop after a
few minutes.

2. The MTX-60 tamping rammer is designed to run at 3,800
to 4,100 rpm. At optimum rpm the foot hits at the rate
between 644 ~ 695 impacts per minute. Increasing
throttle speed past factory set rpm does not increase
impacts and may damage unit. The MTX-60 is designed
to advance while tamping. For faster advance, pull back
slightly on the handle so that rear of foot contacts soil first.
3. To stop the tamping action, move throttle lever quickly
from START to IDLE position (Figure 9).

THROTTLE LEVER
(IDLE POSITION)

Figure 9. Throttle Lever (Idle Position)

PAGE 16 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

MAINTENANCE
Perform the scheduled maintenance procedures as indicated:

EVERY 200 HOURS

DAILY

 Remove the oil drain plug on foot housing (Figure 13)
and drain the oil. Refill with approximately 0.69 qt. (0.65
liter) of 10W-30 SE, SF or higher grade motor oil. Oil
should be midway in sight glass. Break in oil should be
changed after first 50 hours.

 Thoroughly remove dirt and oil from the engine and
control area.
 Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary.
 Check the spring box and bellows for oil leaks. Repair or
replace as needed.

OIL FILL PLUG

EVERY 50 HOURS

OIL DRAIN PLUG

SIGHT GLASS

 Remove the fuel filter cap and clean the inside of the
fuel tank (Figure 11).

Figure 13. Oil Drain Plug

EVERY 2 YEARS

FUEL FILTER

 Replace the fuel line every 2 years even if there is no
visible damage.

LONG TERM STORAGE
 Slide the throttle lever to the STOP position.

Figure 11. Fuel Filter
 Remove and clean the spark plug, then adjust the spark
gap to 0.024~0.028 inch (0.6~0.7 mm).

EVERY 80 TO 100 HOURS
 Remove the air cleaner cover. Loosen and remove the 2
screws that hold the cover to the air cleaner assembly. If
the primary element (Figure 12) is dirty, wash it with
gasoline or kerosene. Then dip it in engine oil (SAE10W30) and wring the element so that 25 to 30 cc of engine
oil remains on the element.

 Drain any fuel including in the fuel hose.
 Replace lubrication oil and apply grease to lubrication
points.
 Cover the air intake on the air cleaner and the exhaust
outlet on the muffler.
 Store unit indoors covered with plastic sheet in moisture
free and dust free location out of direct sunlight.

PRIMARY
ELEMENT

Figure 12. Air Cleaner Primary Element

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 17

TROUBLESHOOTING
TABLE 4. Engine Troubleshooting
Symptom

Possible Problem

Solution

Difficult to start
Fuel is available but spark
plug will not ignite. (Power
available at high tension
cable).

Fuel is available but spark
plug will not ignite. (Power
NOT available at high
tension cable).
Fuel is available and spark
plug ignites (compression
normal).

Ignition plug being bridged?

Check ignition system.

Carbon deposit at ignition?

Clean or replace ignition.

Shor t circuit due to defective Replace insulators.
insulators?
Improper spark gap?

Set spark plug gap to the correct gap.

Shor t circuit at stop switch?

Check stop switch circuit. Replace stop switch if
defective.

Ignition coil defective?

Replace ignition coil.

Muffler clogged with carbon
deposits?

Clean or replace muffler.

Fuel in use inadequate
(water, dust)?

Flush fuel system and replace with fresh fuel.

Air Cleaner clogged?

Clean or replace air cleaner.

Fuel is available and spark
plug ignites (compression
low).

Cylinder worn?

Replace cylinder.

Spark plug loose?

Tighten spark plug.

Low compression.

Incorrect valve adjustment?

Check and adjust valves.

Air cleaner clogged?

Clean or replace air cleaner.

Air in fuel line?

Bleed (remove air) from fuel line.

Operation not satisfactory
Not enough power
available (compression
normal, no misfiring).

Carbon deposits in cylinder? Clean or replace cylinder.
Not enough power
available (compression
normal, misfiring).

Ignition coil defective?

Flush fuel system and replace with fresh fuel.

Ignition plug often shor ts?

Replace ignition wires, clean ignition.

Fuel in use inadequate
(water, dust)?

Flush fuel system and replace with fresh fuel.

PAGE 18 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

TROUBLESHOOTING
TABLE 4. Engine Troubleshooting (continued)
Symptom

Possible Problem

Solution

Operation not satisfactory

Rotational speed
fluctuates.

Governor adjustment improper?

Adjust governor to correct level.

Governor spring defective?

Clean or replace ignition.

Fuel flow erratic?

Check fuel line.

Air taken in through suction line? Check suction line.
Recoil star ter not
working properly.

Dust in rotating par t?

Clean recoil star ter assembly.

Spring failure?

Replace spiral spring.

MIxed fuel quality is inadequate?

Check fuel to oil mixture.

Excessive carbon deposits in
combustion chamber?

Clean or replace crankcase.

Exhaust or muffler clogged with
carbon?

Clean or replace muffler.

Spark plug heat value incorrect?

Replace spark plug with correct type spark plug.

Engine overheats.

TABLE 5. Rammer Troubleshooting
Symptom

Engine runs but rammer
jumps erratically or not
at all.

Possible Problem

Solution

Operating speed of throttle
lever is incorrectly set?

Set throttle lever to correct position.

Oil in excess?

Drain excess oil. Bring to correct level.

Clutch slips?

Replace or adjust clutch.

Spring Failure?

Replace spiral spring.

Speed of engine improper?

Adjust engine speed to correct operating RPM setting.

Soil over-compacted?

Shut down machine and test soil.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 19

EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST
NO.
1
2%
2%
3
4

PART NO. PART NAME
QTY. REMARKS
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
12347
WASHER, 3/8 IN....1 .....MQ-45T ONLY
12348
HOSE ..................A/R ...MAKE LOCALLY
12349
BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

QTY. Column
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.

REMARKS Column
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.

Unique Symbols — All items with same unique
symbol

Indicated by:
“INCLUDES ITEMS W/(unique symbol)”

(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.

Serial Number Break — Used to list an effective serial
number range where a particular part is used.

Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.

PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.

Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables, shims,
and certain washers and nuts.
“Not Sold Separately” — Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.

PAGE 20 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

SUGGESTED SPARE PARTS
MTX-60 RAMMER 1 TO 3 UNITS WITH HONDA
GX100UKRBF ENGINE
Qty. P/N
Description
1 ......... 956100062 ............. THROTTLE WIRE
3 ......... 366010070 ............. PRIMARY ELEMENT, AIR CLEANER
3 ......... 366010080 ............. SECONDARY ELEMENT, AIR CLEANER
1 ......... 366345570 ............. CAP, FUEL TANK W/ STRAP
2 ......... 16910Z4ES21 ........ FILTER, IN-LINE FUEL
3 ......... 9805655757 ........... SPARK PLUG
1 ......... 959300770 ............. STRAINER, FUEL TANK
1 ......... 28462Z0DV02 ........ ROPE, RECOIL STARTER

Part numbers on this Suggested Spare
Parts List may supersede/replace the P/N
shown in the text pages of this book.

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 21

NAMEPLATE AND DECALS
NAME PLATE AND DECALS ASSY.
1

20
0

3
5
STOP
0

7
,

“

…

‰

“

†

‡

‚

)

—

‰

“

‰

—

Made in Japan
b

‡

‘

’

‡

€

“

’

‘

‚

€

—

„

‡

NPA-0000

series

quick manual
Engine Oil
Use SAE 10W/30,SE or higher grade motor oil

RAMMING CYLINDER OIL
Use SAE 10W/30,SF or higher grade moter oil

Fuel
Use normal quality gasoline

PAGE 22 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

NAMEPLATE AND DECALS
NAME PLATE AND DECALS ASSY.
NO.
1
2
3
4
5
6
7
8
11
20

PART NO.
920212910
920212460
920212470
920212490
920212480
920210310
920212840
920212540
920212520

PART NAME
QTY. REMARKS
OPERATION DECAL
1
AIR CLEANER DECAL ................................................ 1 ........ NPA-1246
LEVER OPERATION DECAL
1
MAX SPEED DECAL 4100
1
MACHINE STOP DECAL
1
EC NOISE REQ. DECAL LWA107
1
CHOKE OPERATION DECAL
1
QUICK MANUAL
1
SERIAL PLATE NO. ..................................................... 1 ........ CONTACT MQ PARTS DEPT.
ANTI- VIB. HANDLE DECAL
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 23

CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
47

48
48
36-4
36-3
36-2

71-1
71-2
71-3

36-1
36

36-7

122

36-9

36-8

41
51

77
42-1
42-2
42-3

36-5

54-1
54-2

32-1
32-1

40
43-2

43-1

53
62

75
39 37

38
NEW
STYLE 23
CLUTCH

35
73

24
25-2
25-1

1
49

14
11
10
12

17
916

4
28

55
58
52
53

19
54-2
54-1

OLD
STYLE
CLUTCH

6
15
13
20

121

54-2
54-1

101

61
55

63
64

PAGE 24 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
NO.
1
2
*
3
4
5
6
7
9
10
11
12
13
14
15
16
17
19
20
21
23
23
24
25-1
25-2
26
28
29
31
32-1
32-2
33
34
35
36
36-1#
36-2#
36-3#
36-4#
36-5#
36-7#
36-8#
36-9#
37
38
39
40

PART NO.
368119170
009120204
041006007
368347410
060404010
080200350
080100620
040006203
040006305
080100620
080200170
080200250
368347250
040006304
080100520
080200200
047940060
050710100
001520825
366346210
366348550
952401450
001220825
030208200
368217640
001710840
022611010
368347490
001211030
030210250
939010270
030208200
020308060
366118640
366010010
366010020
030206150
366010040
366010050
366010070
366010080
366030040
366345470
954407681
954407682
366460160

PART NAME
QTY. REMARKS
CRANKCASE CP......................................................... 1 ........ INCLUDES ITEM W/
*
STUD BOLT 10X50X21T/21S
4
BEARING 6007Z
1
PINION DRUM
1
OIL SEAL TC - 40528
1
STOP RING S-35
1
STOP RING R-62
1
BEARING 6203
1
BEARING 6305
1
STOP RING R62
1
STOP RING S-17
1
STOP RING R-62
1
CONNECTING ROD
1
BEARING 6304
1
STOP RING R- 52
1
STOP RING S- 20
1
NEEDLE BEARING FJ- 1816
1
O- RING AS568- 267
1
SOCKET HEAD BOLT 8X25 T
8
CLUTCH ASSY ............................................................ 1 ........ S/N S-1880 AND BELOW
CLUTCH ASSY ............................................................ 1 ........ S/N S-1881 AND ABOVE
WASHER 8.5X22X3
1
BOLT 8X25 T
1
WASHER, LOCK M8
1
ENGINE FLANGE
1
SOCKET HEAD BOLT 8X40 T
4
FLANGE NUT M10 H
4
SHOCK ABSORBER BRACKET 60
1
BOLT 10X30 H
4
WASHER, LOCK M10
4
STOPPER RUBBER (70)
1
WASHER, LOCK M8
1
NUT M8
1
AIR CLEANER ASSY .................................................. 1 ........ INCLUDES ITEMS W/ #
AIR CLEANER COVER
1
WASHER, FLAT M6 (6.5X18X1.5)
2
WASHER, LOCK M6
2
COIN BOLT M6
2
AIR CLEANER BASE CP
1
PRIMARY ELEMENT CP
1
SECONDARY ELEMENT
1
GRIP BPLT CP
1
INTAKE PIPE
1
CYCLONE CLAMP (CY- 1) 45
1
CYCLONE CLAMP (CY- 1) 38
1
UNDER SEALING FORM
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 25

CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
47

48
48
36-4
36-3
36-2

71-1
71-2
71-3

36-1
36

36-7

122

36-9

36-8

41
51

77
42-1
42-2
42-3

36-5

54-1
54-2

32-1
32-1

40
43-2

43-1

53
62

75
39 37

38
NEW
STYLE 23
CLUTCH

35
73

24
25-2
25-1

1
49

14
11
10
12

17
916

4
28

55
58
52
53

19
54-2
54-1

OLD
STYLE
CLUTCH

6
15
13
20

121

54-2
54-1

101

61
55

63
64

PAGE 26 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY. (continued)
NO.
41
42-1
42-2
42-3
43-1
43-2
44
45
46
47
48
49
50
51
52
53
54-1
54-2
55
56
57
58
61
62
63
64
66
71-1
71-2
71-3
72
73
74
75
76
77
90
101
121
122@

PART NO.
366460150
001220851
030208200
031108160
001210815
030208200
368217760
368217750
366460140
366345980
050200060
009110040
368119470
368119480
022910260
366460170
001520820
031108160
009110038
368217770
009110039
022910250
368119490
366461050
033910220
009110038
366900032
001220620
030206150
031106100
020306050
959006120
368461280
2067550101
959021810
454010020
368347270
368010010
912210012
956100062

PART NAME
QTY. REMARKS
SIDE SEALING FORM
1
BOLT 8X55 T
2
WASHER, LOCK M8
2
WASHER, FLAT M8
2
BOLT 8X15 H
2
WASHER, LOCK M8
2
BOTTOM CLEANER COVER 60
1
TOP CLEANER COVER 60
1
RUBBER BUSH 10X16X17
2
CLEANER COVER KNOB
2
O- RING P6
2
FLANGE BOLT 8X20
4
LINK GUARD
1
MUFFLER GUARD
1
WELL NUT M8
2
FLANGE COLLAR 8
2
SOCKET HEAD BOLT 8X20 T
4
WASHER, FLAT M8
4
SOCKET HEAD BOLT 8X30 ZN
2
EX BAR
1
SOCKET HEAD BOLT 6X25 ZN
4
WELL NUT M6
4
ENGINE GUARD
1
COLLAR / GUARD
12
WASHER 8.4X15.5X1.6
4
SOCKET HEAD BOLT 8X30 ZN
4
LEVER ASSY W/ T. WIRE ............................................ 1 ........ INCLUDES ITEMS W/@
BOLT 6X20 T
2
WASHER, LOCK M6
2
WASHER, FLAT M6
2
NUT M6
2
CLIP (TCP2 - 10509B)
1
WIRE HARNESS
1
CLAMP COMPL
2
SPIRAL TUBE KEP6 / L=500
1
CLAMP TC- 100
3
CRANK GEAR
1
FRONT COVER
1
ENGINE ASSY, GX100UKRBF
1
THROTTLE WIRE
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 27

GUIDE CYLINDER ASSY.
GUIDE CYLINDER ASSY.

21
2

1
20

9
36

30
25

18 17

13
15

16
9

29
30
27

7
32
4
6
5-2
5-1

31
34

33
35

PAGE 28 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

GUIDE CYLINDER ASSY.
GUIDE CYLINDER ASSY.
NO.
1
2
3
4
5-1
5-2
6
7
8
9
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37

PART NO.
368461210
368459920
368347290
368461160
001121230
030212300
952404790
368461260
368461200
368461270
368347281
368217710
050100800
001521020
001520835
953405270
953405260
368217720
050100850
050101150
002211035
368346180
368347520
368461400
368347530
368461410
001220840
020308060
953405270
953405260
368118970
366460300
953404670
050200800
050101300

PART NAME
QTY.
REMARKS
PISTON PIN
1
PISTON PIN PLUG
2
PISTON ROD
1
PISTON END
1
BOLT 12X30 T
1
WASHER, LOCK M12
1
WASHER 13306
1
LOWER STOPPER
1
BOTTOM STOPPER
1
MAIN SPRING
2
SPRING CYLINDER ............................................ 1 ................ REPLACES P/N 368347280
FOOT PLATE
1
O- RING G- 80
1
SOCKET HEAD BOLT 15X20 T
4
SOCKET HEAD BOLT 8X25 T
4
PLUG 1/4X14 13L
1
PACKING 1/4 (CU)
1
CYLINDER GUIDE
1
O- RING G-85
1
O- RING G-115
1
BOLT 10X35 H, SW4
4
ORANGE BELLOWS
1
BELLOWS CLAMP131D
1
BAND GUIDE 131D
1
BELLOWS CLAMP 149D
1
BAND GUIDE 149D
1
BOLT 8X40 T
2
NUT M8
2
PLUG 1/4X14 13L
1
PACKING 1/4 (CU)
1
PROTECTION SLEEVE
1
OIL GAUGE ASSY
1
COPPER PACKING 17X25.5X1
1
O- RING P- 80
1
O- RING G-130
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 29

FOOT ASSY.
FOOT ASSY.

2
3
8

2
3

PAGE 30 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

FOOT ASSY.
FOOT ASSY.
NO.
1
2
3
4
5
7
8

PART NO.
362910150
022711214
030212300
009110034
009110035
368347460
363343390

PART NAME
FOOT ASSY 265W M4B
NYLON NUT M12
WASHER, LOCK M12
SQUARE NECK BOLT 12X65
SQUARE NECK BOLT 12X95
FOOT COVER
HANDLEBAR GRIP (FOOT)

QTY.
1
4
4
2
2
1
1

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 31

FUEL TANK AND HANDLE ASSY.
FUEL TANK AND HANDLE ASSY.
9

11
201

54
51
53

10
56
17

FOR CARBURETORS
WITHOUT PRIMING BULBS

23
A

15
16

FOR CARBURETORS
WITH PRIMING BULBS

13
12-2
12-1

110 1
6
43

19
18

13
12-2
12-1

4-1
4-2

12-2
12-1

4-2
4-1

112

111
101

41
43

110 1

B
A

101
102

21
42

113

101
104

112

106

1
2-2

NOTES

ITEM 110, PRIMER PUMP KIT,
FOR USE ON UNITS WITH
S/N T-3424 AND ABOVE

103

2-1
101

PAGE 32 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

FUEL TANK AND HANDLE ASSY.
FUEL TANK AND HANDLE ASSY.
NO.
1
2-1
2-2
3
4-1
4-2
5
6
7
8
*
9
10
11
12-1
12-2
13
14
15
16
17
17%
18
19
20
21
23
40
41#
42#
43#
51
53
54
55
56
101
102
103
104
106
110

PART NO.
368347630
001521020
033121009
368119570
001211020
030210250
939010270
030208200
020308060
366010060
366345570
368119460
094010053
001210815
030208200
952401450
031108160
959300770
366459790
366345280
366349420
020305040
030205130
959026122
954406420
009110037
366910030
366217170
091005020
022610505
980010330
955010305
366345620
454010020
954010270
954406420
16910Z4ES21
959026103
950014500150M
950033606020
366900060

111%
112%
113%
201

959028301
954408170
959021814
920212910

PART NAME
QTY. REMARKS
SHOCK ABSORBER W/ PIN
2
SOCKET HEAD BOLT 10X20 T
4
TOOTHED LOCK WASHER B M10
4
HANDLE
1
BOLT 10X20 H
4
WASHER, LOCK M10
4
RUBBER STOPPER (70)
1
WASHER, LOCK M8
1
NUT M8
1
TANK CAP STRAP
1
FUEL TANK CAP ASSY ............................................... 1 ........ INCLUDES ITEM W/
*
FUEL TANK 2L
1
PAN HEAD SCREW 4X8
4
BOLT 8X15 H
3
WASHER, LOCK M8
3
WASHER 8.5X22X3
2
WASHER, FLAT M8
1
STRAINER #508
1
FUEL TANK PACKING
1
FILTER HOLDER .......................................................... 1 ........ S/N T-3423 AND BELOW
FILTER HOLDER W/V .................................................. 1 ........ S/N T-3424 AND ABOVE
NUT M5
3
WASHER, LOCK M5
3
FUEL HOSE L=70
1
HOSE BAND 10.5
2
TAPPING SCREW 5X20
2
ROLLER ASSY W/ SCREW .........................................1 ........ INCLUDES ITEM W/ #
ROLLER
2
SCREW 5X20
4
FLANGE NUT M5 H
4
TACHO & HOUR METER
1
CURL CORD TP-22
1
METER FINISHER
1
CLAMP TC-100
5
CLIP AB-3N
1
HOSE BAND 10.5
4
FUEL STRAINER
1
FUEL HOSE 5.5X11.5X80
1
FUEL HOSE 1M
1
VINYL TUBE L260
1
PRIMER PUMP KIT/ NO CARB .................................. 1 ........ INCLUDES ITEMS W/%
.................................................................................................S/N T-3424 AND ABOVE
RETURN HOSE 3X6X600 ............................................ 1 ........ S/N T-3424 AND ABOVE
HOSE CLIP 5 ............................................................... 2 ........ S/N T-3424 AND ABOVE
SPIRAL TUBE 6D-200L ............................................... 1 ........ S/N T-3424 AND ABOVE
OPERATION DECAL
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 33

COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
A

4
7
8

7
11

1
13

10
2

BODY

5
14
11
6

12
9

NOTES

OLD
STYLE
LEVER

NEW
STYLE
LEVER

OLD STYLE LEVER BODY NO LONGER
AVAILABLE. NEW STYLE ITEMS 1, 2, AND 9
ARE NOT COMPATIBLE WITH OLD STYLE
BODY. IF REPLACEMENT OF ITEMS 1, 2
OR 9 IS REQUIRED, ORDER KIT “A”.
TO DETERMINE IF COMBINATION LEVER
ASSY IS OLD STYLE OR NEW STYLE, SEE
ITEM 2, LEVER. NEW STYLE LEVER HAS
MOLDED TAB AT BOTTOM.

MOLDED
TAB

PAGE 34 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

COMBINATION LEVER ASSY.
COMBINATION LEVER ASSY.
NO.
A

PART NO.
366900032

A
1
1#@
2
2#@
3#@
4#@
5#@
6#@
7#@
8#@
9
9#@
10#
11#@
12#@
13#@
14#@

956200110
366346260
366349430
366010180
366010310
366010190
366010200
366010210
366010220
020408050
959407650
366010260
366010320
956100062
094010051
094010052
050200150
050200110

PART NAME
QTY. REMARKS
COMB. LEVER ASSY W/ THROTTLE WIRE ... 1 ...... INCLUDES ITEMS W/ #
..................................................................................REPLACES 366900030
COMB. LEVER ASSY ..................................... 1 ...... INCLUDES ITEMS W/@
FUEL COCK .................................................... 1 ...... SEE NOTE ON DRAWING
FUEL COCK .................................................... 1 ...... NEW STYLE, SEE NOTE ON DRAWING
LEVER ............................................................ 1 ...... SEE NOTE ON DRAWING
LEVER ............................................................ 1 ...... NEW STYLE, SEE NOTE ON DRAWING
SLIDER
1
END CAP
1
WIRE CAP
1
BOLT AND WASHER SET
1
NUT M8, H=5
2
SOCKET HEAD SCREW/TH.WIRE
1
STOP SWITCH ................................................ 1 ..... SEE NOTE ON DRAWING
STOP SWITCH ................................................ 1 ..... NEW STYLE, SEE NOTE ON DRAWING
THROTTLE WIRE
1
TAPPING SCREW B1 4X12
4
TAPPING SCREW B1 4X30
1
O-RING, P15
1
O-RING, P11
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 35

HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.

PAGE 36 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
2
*
3
*
5
6
7
8
9
10
11
12
*
13
14
15
16

PART NO.
12000Z0DV00
12201Z0D305
12204Z0D305
12311Z0D000
12355Z0D000
12365Z0D000
15571Z0DV71
15572ZM7000
15721Z0DV70
90014952000
91202KJ9003
93500030050A
9805655757
15171Z0DV00
90008ZM7000

PART NAME
QTY. REMARKS
BARREL ASSY., CYLINDER ....................................... 1 ........ INCLUDES ITEMS W/
*
GUIDE ASSY., EX VALVE (O.S.)
1
GUIDE, INLET VALVE (O.S)
1
COVER, HEAD T
1
COVER COMP A, BREATHER
1
COVER COMP B, BREATHER
1
VALVE, OIL OUTLET
1
PLATE, STOPPER
1
TUBE, BREATHER
1
VOLT, FLANGE 6X14 (CT200)
6
OIL SEAL 20X32X6
1
SCREW 3X5
1
PLUG, SPARK (U16FSR-UB)
1
PIPE, BREATHER
1
BOLT 4X10
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 37

HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.

PAGE 38 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
1
3
4#
5
*
9
*
10
11
12
13
*
14
15
*
16
*
17
*
18
19
21
*
23
24
26
27
28

PART NO.
11300Z0D409
15600ZM7003
15625ZE1003
16510ZL8000
16531ZE1000
16541Z0D000
90121952000
90131ZE1000
90451ZE1000
90601ZE1000
90602ZE1000
91202KJ9003
9410106800
9425108000
9430108200
91001Z0DV01
11511Z0DV10
91231891003
9430306100
957010804500
934021004000

PART NAME
QTY. REMARKS
COVER ASSY., CRANK CASE .................................... 1 ........ INCLUDES ITEMS W/
*
OIL FILLER CAP ASSY ............................................... 2 ........ INCLUDES ITEMS W/#
PACKING, OIL FILLER CAP
2
GOVERNOR ASSY.
1
SLIDER, GOVERNOR
1
SHAFT, GOVERNOR ARM
1
FLANGE BOLT 6x25
8
BOLT, DRAIN PLUG
1
THRUST WASHER 6 MM
1
WASHER, DRAIN PLUG
1
CLIP, GOVERNOR HOLDER
1
OIL SEAL 20x3x6
1
PLAIN WASHER 6 MM
2
LOCK PIN
1
KNOCK PIN
2
BEARING, RADIAL BALL 6204
1
FLANGE JOINT PTO
1
OIL SEAL 6x11x4
1
KNOCK PIN 6x10
2
FLANGE BOLT 8x40
4
BOLT WASHER 10x40
2

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 39

HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.

16.8

85.3

PAGE 40 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
3
6

PART NO.
PART NAME
QTY. REMARKS
13310Z0DV70 CRANK SHAFT COMP. ............................................... 1 ........ INCLUDES ITEM W/
*
91001Z0DV01 BEARING, RADIAL BALL
2

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 41

HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY.
PISTON AND CONNECTING ROD ASSY.

PAGE 42 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY.
PISTON AND CONNECTING ROD ASSY.
NO.
1
2
3
4
4
5
*
6

PART NO.
13010Z0D003
13101Z0D000
13111ZE0000
13200Z0D000
13200Z0D305
90001ZM7000
90551ZE0000

PART NAME
QTY.
REMARKS
RING SET, PISTON
1
PISTON
1
PISTON PIN
1
CONNECTING ROD ASSY. ........................ 1 ............INCLUDES ITEM W/
*
CONNECTING ROD ASSY. ........................ 1 ............UNDERSIZE, INCLUDES ITEM W/
*
CONNECTING ROD BOLT
2
CLIP, PISTON PIN 13MM
2

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 43

HONDA GX100KRBF ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.

PAGE 44 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

PART NO.
14320Z0D010
14324Z0D000
14400Z0D003
14431Z0D000
14441Z0D000
14461ZL8000
14711Z0D000
14721Z0D000
14751Z0D000
14771ZM3010
90012333000
90206001000
91301ZM0V31
12209KT7013

PART NAME
PULLEY, COMP., CAMSHAFT
SHAFT, CAM PULLEY
TIMING BELT (61YU7 G-200)
ROCKER ARM, INTAKE VALVE
ROCKER ARM, EXHAUST VALVE
SHAFT, ROCKER ARM
INLET VALVE
EXHAUST VALVE
SPRING, VALVE
RETAINER, VALVE SPRING
SCREW, TAPPET ADJUSTING
NUT, TAPPET ADJUSTING
O RING 6.8X1.9
SEAL, VALVE STEM

QTY.
1
1
1
1
1
2
1
1
2
2
2
2
1
1

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 45

HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.

PAGE 46 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
1
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
*
12
*
13

PART NO.
28400Z0DV03ZA
28410Z0DV02ZA
28421Z0DV02
28422ZG0W02
28433ZG0W02
28441ZW6003
28442ZH8003
28461ZH8003
28462Z0DV02
28467Z0DV02
28468Z0DV02
90003ZH8003
957010600800

PART NAME
QTY. REMARKS
RECOIL STARTER ASSY ............................... 1 ........ INCLUDES ITEMS W/
*
CASE COMP., RECOIL *5-3-5
1
REEL, RECOIL STARTER
1
RATCHET, STARTER
1
GUIDE, RATCHET
1
SPRING, FRICTION
1
SPRING, RECOIL STARTER
1
STARTER KNOB
1
ROPE, RECOIL STARTER
1
PLATE, SIDE
1
PLATE, SLIDE
1
SET SCREW
1
BOLT, FLANGE 6X8
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 47

HONDA GX100KRBF ENGINE — FAN COVER ASSY.
FAN COVER ASSY.

PAGE 48 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
3

PART NO.
19610Z0DV00ZB
90014952000

PART NAME
FAN COVER CP.
BOLT, FLANGE 6X14 (CT200)

QTY.
1
4

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 49

HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW)
CARBURETOR ASSY. (S/N T-3423 AND BELOW)

9 2

17
16

15
31

19
20

38
34

4
28

26 29
30

12 7
31
23
25

40
39
40

1
3

PAGE 50 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW)
CARBURETOR ASSY. (S/N T-3423 AND BELOW)
NO.
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
*
12
*
13
*
14
*
15
*
16
*
17
*
18
*
19
*
20
*
21
*
22
*
23
*
24
*
25
*
26
*
27
*
28
*
29
*
30
*
31
*
32
33
34
35
36
37
38
39
40
42

PART NO.
16010Z0DV02
16011Z0DV02
16013Z0DV02
16014Z0DV02
16018ZM3004
16019ZM3004
16022ZM3014
16023Z0DV02
16030ZM3004
16040Z0DV02
16041Z0DV02
16042Z0EV92
16043Z0DV02
16044Z0DV02
16045Z0DV02
16046Z0DV73
16054Z0DV02
16048Z0DV02
16049Z4ES12
16050Z0DV02
16051Z0DV02
16052Z0DV02
16053Z0DV02
16054Z0DV02
16055Z0DV02
16056Z0DV02
16057Z0DV02
16058Z0DV72
16059Z0DV03
16060Z0DV02
16061Z0DV02
16100Z4ES13
16211Z0DV00
16212Z0DV00
16213Z4ES10
16214Z0DV00
16215Z0DV00
16221Z0DV00
950014527050
950024085008
16552896650

PART NAME
QTY. REMARKS
GASKET, METALING DIAPHRAGM
1
GASKET, PUMP
1
DIAPHRAGM ASSY, METALING
1
DIAPHRAGM, PUMP
1
SCREEN, INLET
1
VALVE, INLET NEEDLE
1
PIN, METALING LEVER
1
LEVER, METALING
1
SPRING, PUMP
1
COVER, PUMP
1
SCREW
1
SPRING
1
COVER, METALING DIAPHRAGM
1
SCREW
1
STOPPER, THROTTLE LEVER
1
LEVER, THROTTLE
1
SCREW, VALVE
1
SPACER, THROTTLE LEVER
1
SCREW, IDLE ADJUSTING
1
SPRING
1
VALVE, THROTTLE
1
SHAFT, THROTTLE
1
CLIP, THROTTLE SHAFT
1
SCREW, VALVE
1
SCREW ASSY
5
SPRING
1
BALL
1
SHAFT ASSY, CHOKE
1
VALVE, CHOKE
1
SCREW
1
SEAL, DUST
2
CARBURETOR ASSY. (HAD 201C) ............................ 1 ........ INCLUDES ITEMS W/
*
INSULATOR, CARBURETOR
1
PACKING, INSULATOR
1
INSULATOR B, CARBURETOR
1
PACKING B, INSULATOR
1
PLATE, INSULATOR
1
PACKING, CARBURETOR
2
HOSE, FUEL 4.5 X 270
1
CLAMP, TUBE
2
COLLAR, LEVER
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 51

HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE)
CARBURETOR ASSY. (S/N T-3424 AND ABOVE)

PAGE 52 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE)
CARBURETOR ASSY. (S/N T-3424 AND ABOVE)
NO.
1
*
2
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
*
12
*
14
*
15
*
16
*
17
*
18
*
19
*
20
*
21
*
22
*
23
*
24
*
25
*
26
*
27
*
28
*
29
*
30
*
31
32
33
34
35
36
37
38
*
39
40
41
*
41
*
41
*
41
*
42
44
*
45
*
46
*
47

PART NO.
16010Z0DV02
16011Z0DV02
16013Z4ES32
16014Z0DV02
16018ZM3004
16019ZM3004
16022ZM3014
16023Z0DV02
16030ZM3004
16040Z4E802
16041Z0DV02
16042Z0DV02
16044Z4E802
16045Z0DV02
16046Z0DV73
16048Z0DV02
16049Z4ES12
16050Z0DV02
16051Z0DV02
16052Z0DV02
16053Z0DV02
16054Z0DV02
16055Z0DV02
16056Z0DV02
16057Z0DV02
16058Z0DV02
16059Z0DV03
16060Z0DV02
16061Z0DV02
16100Z4ES43
16211Z0DV00
16212Z0DV00
16213Z4ES10
16214Z0DV00
16215Z0DV00
16221Z0DV00
16552896650
950014527050
950024085008
99101Z0D048
99101Z0D050
99101Z0D052
99101Z0D054
950033602620
16017Z4ES32
16026Z4ES32
16032Z4ES32
16055Z4ES32

PART NAME
QTY. REMARKS
GASKET, METERING DIAPHRAGM
1
GASKET, PUMP
1
DIAPHRAGM ASSY, METERING
1
DIAPHRAGM, PUMP
1
SCREEN, INLET
1
VALVE, INLET NEEDLE
1
PIN, METERING LEVER
1
LEVER, METERING
1
SPRING, PUMP
1
COVER, PUMP
1
SCREW
1
SPRING
1
SCREW
1
STOP, THROTTLE
1
LEVER, THROTTLE
1
SPACER, THROTTLE LEVER
1
SCREW, IDLE ADJUSTING
1
SPRING
1
VALVE, THROTTLE
1
SHAFT, THROTTLE
1
CLIP, THROTTLE SHAFT
1
SCREW, VALVE
2
SCREW ASSY
1
SPRING
1
BALL
1
SHAFT ASSY, CHOKE
1
VALVE, CHOKE
1
SCREW
1
SEAL, DUST
2
CARBURETOR ASSY (W/PRIMER) .................................. 1 .........INCLUDES ITEMS W/
*
INSULATOR, CARBURETOR
1
PACKING, INSULATOR
1
INSULATOR B, CARBURETOR
1
PACKING B, INSULATOR
1
PLATE, INSULATOR
1
PACKING, CARBURETOR
2
COLLAR, LEVER
1
HOSE, FUEL 4.5 X 270
1
CLAMP, TUBE
2
JET (#48)
1
JET (#50)
1
JET (#52)
1
JET (#54)
1
TUBE, VINYL. 11 X 13 X 260
1
BODY ASSY, AIRPURGE
1
COVER, PRIMER PUMP
1
PUMP, PRIMER
1
SCREW ASSY
4

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 53

HONDA GX100KRBF ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.

8
14

PAGE 54 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
8
10
11
14

PART NO.
17228Z0DV01
90042Z4ES30
9405005000
17410Z4ES30

PART NAME
PACKING, AIR CLEANER
STUD BOLT 5X95
FLANGE NUT 5MM
ELBOW, AIR CLEANER

QTY.
1
2
2
1

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 55

HONDA GX100KRBF ENGINE — MUFFLER ASSY.
MUFFLER ASSY.

PAGE 56 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
5
6

PART NO.
18310Z0DV20
18321Z0DV20
18381Z0D000
90014952000
90048Z0DV00
90343ZE6000

PART NAME
MUFFLER COMP.
MUFFLER PROTECTOR
GASKET, MUFFLER
VOLT, FLANGE 6X14 (CT200)
STUD BOLT 5X78
NUT, SELF-LOCK 6MM

QTY.
1
1
1
3
2
2

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 57

HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY.
FLYWHEEL IGNITION ASSY.

7
7

4
11

1
10

PAGE 58 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY.
FLYWHEEL IGNITION ASSY.
NO.
1
3
4
7
9
10
11
12

PART NO.
13331ZM7000
30564ZA5000
31110Z0D003
90022888010
9405012000
28451Z0DV02
30500Z0DV02
30700Z0DV01

PART NAME
QTY. REMARKS
WOODRUFF KEY 25X18
1
GROMMET, CORD
1
FLYWHEEL COMP.
1
FLANGE BOLT 6X20
2
FLANGE NUT M12
1
STARTER PULLEY
1
IGNITION COIL ASSY ................................................. 1 ........ INCLUDES ITEMS W/
*
TERMINAL ASSY.
1

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 59

HONDA GX100KRBF ENGINE — CONTROL ASSY.
CONTROL ASSY.

20
11

4
9

8
8

PAGE 60 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
3
4
5
6
*
8
9
10
*
11
*
12
*
15
17
19
20

PART NO.
16555Z0DV00
16561Z0DV00
16562Z0DV00
16594883010
90014952000
90015ZE5010
90605230000
92301050200A
93500040060H
9405006000
16550Z0DV01
16500Z4ES30
9400105000

PART NAME
QTY. REMARKS
GOVERNOR ROD
1
GOVERNOR SPRING
1
SPRING, THROTTLE RETURN
1
HOLDER, WIRE
1
VOLT, FLANGE 6X14 (CT200)
2
BOLT, GOVERNOR ARM
1
CIR CLIP
1
BOLT 5X20
1
SCREW 4X6
1
FLANGE NUT 6MM
1
GOVERNOR ARM
1
CONTROL ASSY ......................................................... 1 ........ INCLUDES ITEMS W/
*
NUT M5
2

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 61

HONDA GX100KRBF ENGINE — LABELS ASSY.
LABELS ASSY.

PAGE 62 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

HONDA GX100KRBF ENGINE — LABELS ASSY.
LABELS ASSY.
NO.
2
4
6
14

PART NO.
87521Z0DV01
87528Z0D000
87601Z4ES30
89216130690

PART NAME
LABEL, TRADE MARK
MARK, CHOKE
MARK, TYPE (KRBF)
WRENCH, SPARK PLUG

QTY.
1
1
1
1

REMARKS

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 63

TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS

Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.

The following items are not returnable:

Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.

SPECIAL EXPEDITING SERVICE

Terms of payment for parts are net 30 days.

FREIGHT POLICY
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.

MINIMUM ORDER
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.

RETURNED GOODS POLICY
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
1.

A Returned Material Authorization
must be approved by Multiquip prior to
shipment.

Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.

Any line item with an extended
dealer net price of less than
$5.00.

Special order items.

Electrical components.

Paint, chemicals, and lubricants.

Decals and paper products.

Items purchased in kits.

The sender will be notified of any material
received that is not acceptable.

To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.

Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.

The parts numbers and descriptions
must match the current parts price
list.

The list must be typed or computer
generated.

Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.

The list must state the reason(s)
for the return.

The list must reference the sales
order(s) or invoice (s) under
which the items were originally
purchased.

The list must include the name
and phone number of the person
requesting the RMA.

A copy of the Return Material Authorization
must accompany the return shipment.

Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.

10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.

A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.

LIMITATIONS OF SELLER’S LIABILITY
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.

LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.

Effective: February 22, 2006

11. Credit issued will be applied to future
purchases only.

PRICING AND REBATES
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.

PAGE 64 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11)

NOTES

MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV. #6 (08/23/11) — PAGE 65

OPERATION AND PARTS MANUAL

HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com

MQ Parts Department
Tel. (800) 421-1244
Fax (800) 537-3927

Mayco Parts

800-427-1244
310-537-3700

Fax: 800-672-7877
Fax: 310-637-3284

Warranty Department

800-306-2926
310-537-3700

Fax: 800-672-7877
Fax: 310-637-3284

Service Department

800-421-1244, Ext. 279
310-537-3700, Ext. 279

Fax: 310-537-1173

Technical Assistance

800-421-1244
310-537-3700

Fax: 310-537-4259

800-478-1244

Fax: 310-631-5032

MEXICO

UNITED KINGDOM

MQ Cipsa

Multiquip (UK) Limited Head Office

Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: pmastretta@cipsa.com.mx

Tel: (52) 222-225-9900
Fax: (52) 222-285-0420

Unit 2, Northpoint Industrial Estate,
Global Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk

Tel: 0161 339 2223
Fax: 0161 339 3226

CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: jmartin@multiquip.com

Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664

© COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.

Your Local Dealer is:

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Sdeckman
Create Date                     : 2011:08:24 09:28:44-07:00
Modify Date                     : 2011:08:24 09:28:44-07:00
Subject                         : MTX60-Manual-Rev-3 043010
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe PageMaker 7.0
Format                          : application/pdf
Description                     : MTX60-Manual-Rev-3 043010
Title                           : MTX60-Manual-Rev-3 043010
Creator                         : Sdeckman
Producer                        : Acrobat Distiller 10.0.1 (Windows)
Keywords                        : 
Document ID                     : uuid:20827ad7-2385-4d3e-8419-494e5d8c61f4
Instance ID                     : uuid:b30be3c7-e4fd-42ac-a14f-a7d3da85733d
Page Count                      : 66

EXIF Metadata provided by EXIF.tools

Mikasa Automobile Parts Mtx 60 Users Manual MTX60 Rev 3 043010

Navigation menu

Versions of this User Manual:

Views

Navigation