Mileseey Technology MC180001 Bluetooth Laser Distance Meter User Manual

Shenzhen Mileseey Technology Co., Ltd Bluetooth Laser Distance Meter Users Manual

User guide

R2B User ManualProduct OverviewThank you for purchasing and using MileSeey handheld laser distance meter, please read the manual carefully before using. Mileseey product model R2B is a handheld Laser Distance Meter integrated with measuring wheel and laser level. Thanks to robust housing, compact inner structure,R2B offers the perfect features of IP65 waterproof, drop-resistance and super long lifespan. With 2.4 inch HD colored display, it enables user to read the data easily.Adopting the most cutting-edge technologies of 3D measurement, curve measurement, angle marking function, R2B solved a variety of difficulties for all users.R2B has 15 functions to satisfy different measuring needs and greatly improved user experience. 11 121013Battery installation and using instructions Laser Distance Meter Safety InstructionsThe device is categorized into Class 2 laser product. DO NOT stare at laser directly or shoot at others or it will cause damage to eyes. The product is in accordance with strict standards and regulations through the development and manufacturing, but still can’t entirely exclude the possibility of interference to other devices, may cause discomfort to human and animals. Please DO NOT use this product under explosive or corrosive environment. Please DO NOT use this product near medical devices. Warninga,b, Please DO NOT use this product on the plane.For the safe use of this handheld laser distance meter, please read below instructions carefully.Press the battery cover and slide down to unlock it first, then uplift it to open. (The battery cover is tight for waterproof purpose, please open it with some strength) 1. Measuring ButtonShort press to measure/confirm. Long press to continuous measurement mode2. Function Button Press this button to function menu, select functions by up and down key, press measure button to confirm.3. Setup, Turn on/off laser level ButtonShort press to setup menu, select setup options by up and down key, press measure button to confirm.4. Wheel Measurement ButtonShort press to turn on/off wheel measurement5. Up/Add Button Press this button to page up/Add6.ON/OFF/Return ButtonLong press to turn on/off, short press to return to Single measurementAfter the battery is placed, cover and hold the battery door, press and slide to the top, the cover can be sealed. Insert 3* AAA rechargeable batteries, Ni-MHobserving correct polarity. if the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.The standard batteries are 3 pieces of AAA NI-MH rechargeable batteries, common dry batteries are workable (Do not charge non-rechargeable batteries). Charge the NI-MH batteries by connecting the charging port and adapter or PC with the USB-C cable.Warning: ①Do not charge non-rechargeable batteries to avoid any accidents. ②Do not use rechargeable batteries and non-rechargeable batteries at the same time to avoid any accidents. MileSeey will not be responsible for accident due to charging dry batteries.Laser distance meter may heat up when charging, it's normal, has no effect on the device performance and service life. If it is not used for a long time, remove the batteries and keep it in dry place.Appearance213657849 Warning:Do not use aggressive cleaning agents or solutions. Use only a clean, soft cloth for cleaning.FCC Statements:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 1,DisposalEveryone is responsible for environmental protection.It’s prohibited to dispose used batteries together with household waste, please collect used batteries to designated waste station.This product must not be recycled with household waste. Dispose of the product appropriately in accordance with the national regulations in your country. 2,Scope of ResponsibilityMileSeey will not be responsible for the damages caused by improper use below:*Using the product without instruction;*Use of accessories from other manufacturers without approval from MileSeey ;*Carrying out modification or conversion of the product.• Consult the dealer or an experienced technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1) This device may not cause harmful interference, and2) This device must accept any interference received, including interference that my cause undesired operation.MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Wheel MeasurementSingle/Continuous MeasurementArea MeasurementVolume VMEAS Pythagoras (2-point)7. Send data by Bluetooh / Historical recordShort press to turn on Bluetooth (manually)/ transfer data to App.Long press to check historical record8. Down/Subtract ButtonPress this button to page down/subtract9. WheelIn wheel measurement mode, move the wheel along the measuring path to measure distance.12. Tripod Screw Hole13. Laser Line Emitting Hole11. Battery CompartmentNotes: Each time when turning on wheel measuring, first direction that wheel measured is calculated as positive data, the opposite direction measured is calculated as negative.10. USB-C PortInstruction for iconsPythagoras (3-point)②Auto levelAuto heightαPythagoras (3-point)①αααTrapezoid measurement①Trapezoid measurement②3D measuring: P2P Laser Line Marking FunctionSetup menu explanation①BluetoothShort press to switch on Bluetooth (automatically /manually), and turn off Bluetooth. Bluetooth (Automatic mode), measured data will be transfered to App automatically. Bluetooth (Manual mode), measured date will be transferred to the App by pressingmanually. When the icon turns gray, Bluetooth is off.④⑤ ⑥① ② ③A⑦MA② Measuring unitsShort press to switch measuring units between m/ft/in/ft+in③ReferenceShort press to change measuring reference ⑥Chinese/English Voice broadcast.Short press to select Chinese/English voice broadcast.⑤Rotary screen settingsShort press to activate/de-activate the screen rotary settings for Portrait & Landscape view (only available in Single/Continuous measurement)⑦VoiceShort press to turn the Voice Broadcast ON/OFF.④Digital LevelPress to activate d , the electronicigital leveltilt sensor makes it easier to achieve horizontalalignment with the real-time measuring angle. Triangle Area MeasurementSOperation InstructionsThe device will enter Single distance measurement mode when it is powered ON, short press to select measuring mode, the reminding of the red flashing line shows the line to be measured. ※The measuring data should be different due to different Reference settings. The Rear is the default reference. Front Tripod RearIt can be used to measure the diagonal of the house, horizontal lines, and stake out purposes.Long press to activate Continuous measurement, aiming at the target and press to stop, the Minimum and Maximum data will be displayed accordingly. ※The continuous measurement will stop automatically after 5 minutes. Continuous MeasurementSingle Distance MeasurementThe device will enter Single distance measurement mode when it is powered ON, press after aiming at target to get result at bottom of the screen. InterfaceMeasuring mode displayMeasuring referenceBluetoothAngle displayBattery statusA Measuring interface：Digital tilt displayTo be measured lineB Measuring data interface：Measuring mode display Measuring referenceBluetoothAngle display Battery statusDigital tilt displayFinal result display First line displaySecond line displayThird line displayMeasuring sequence numberMeasuring sequence number3 Power on the device, measure in the certain distance within ±2mm accuracy, it can work properly. Press to select Area measurement , according to the red flashing line, press to get the ① distance (Length) from the target point, press again to get ② distance(Width) from the second target point, Area will be calculated and displayed accordingly. Area MeasurementVolume MeasurementPress to select Volume measurement , according to the red flashing line, press to get ① distance (Length) from the target point, press again to get ② distance (Width) from the second target point, press the third time to get ③ distance (Height), the Volume will be calculated and displayed accordingly.Press to activate wheel measurement, scroll the wheel from the start point to end point, press to stop.※The wheel measurement can be used in Single measurement, Area measurement and Volume measurement.Note: When starting the wheel measurement, please keep an eye on right direction of the wheel. Wheel MeasurementVMEAS0.5130.4280.4450.4585.0885.0885.10425.969
Tips for Pythagorean MeasurementAll Pythagoras measurement can be applied to different directions of applications , only to ensure that the right-angle side is perpendicular to the measured object.Note: According to the Pythagorean Theorem, the right-angle side cannot be greater than the hypotenuse; otherwise there is a calculation error.Pythagoras (2-point)1233.5073.7282.99839.1963.507Press to select Pythagoras (2-point) , according to the red flashing line, press to Pythagoras (3-point)②Pythagoras (3-point)①Press to select Pythagoras (3-point)① , according to the red flashing line, press to get the hypotenuse① from the first target point, rotate around the center of the Reference to the direction perpendicular to the measurement target, press to get distance of vertical edge②, rotate a second time by the same baseline and target at the third point, press to get the second hypotenuse③, the distance between the first and third point L will be calculated and displayed accordingly.Press to select Pythagoras (3-point)② ,according to the red flashing line, press to get the hypotenuse ① from the first target point, rotate around the center of the Reference to aim at second target point, press to get ② hypotenuse, rotate the second time by the same baseline to the direction perpendicular to the measurement target, press to get ③ distance of vertical edge, the distance tween the first and second point L will be calculated and displayed accordingly.Auto LevelPress to Auto level ,according to the red flashing line, aiming at first target point, press to get the angle between hypotenuse and horizontal edge,hypotenuse ①,vertical length ② and horizontal length L, all the data will be displayed at bottom of the screen.α11.9268.0388.81011.9267.8725.1306.4049.8047.8723get the hypotenuse ① from the first target point, rotate around the center of the Reference to the direction perpendicular to the measurement target, press to get distance of vertical edge ②, the second distance of vertical edge L will be calculated and displayed accordingly.7.5505.4034.2622.91137.550Auto HeightPress to Auto height ,according to the red flashing line, aiming at first target point, press to get hypotenuse ①, rotate around the center of the Reference to aim at second target point, press to get hypotenuse②, the angle between two hypotenuses, the length of ①②, vertical length H , all the data will be displayed at bottom of the screen.Point-to-Point (P2P) MeasurementPress to Point-to-Point Measurement ,a message“please wait....”shows up, please keep the device still until the message disappear. According to the red flashing line, aiming at the first target point, press to get the distance① from the first target point; rotate around the center of the Reference, aiming at the second target point, press to get the distance②,the angle between two hypotenuses, the length of ①② and the distance between these two points are displayed on the screen orderly.Note: if calibration fails, please return and recalibrate.Trapezoid measurement 1Press to select Trapezoid Measurement ① , according to the red flashing line, aiming at the first target point, press to get the first right-angle length①;aiming at the second target point, press to get the second right-angle length②;aiming at the third target point, press to get the third right-angle length③,the calculated length of the forth hypotenuse is displayed on the screen.ααα° 39.85.2463.3584.0305.246α° 60.06.5406.5406.5406.54060.0α°1.811.7495.1606.59311.7494.9342.5787.6343.7334.9343Under the mode of Single distance, Area, Volume measurement, after get the first measuring result, press the Add or Subtract button to make add/subtract calculations on the basis of previous and current record, the result is displayed on the screen.Add/Subtract Function Triangular Area MeasurementPress to select Triangular area measurement , according to the red flashing line, press to measure three lines of the triangle ①②③, the triangular area will be calculated and displayed orderly.SLaser Line Marking FunctionShort press to enter the Laser Line Marking Function, mark the red laser line on the target, the real-time angle of laser line is displayed on the screen, and it varies with the angle of device.2.9032.0851.7351.7892.9033Trapezoid measurement 2αPress to select Trapezoid Measurement ② , according to the red flashing line, aiming at the first target point, press to get the first right-angle length ①；aiming at the second target point, press to get the second diagonal length②; the angle between diagonal and horizontal line, the length of first right-angle①, the length of diagonal② and the length of hypotenuse are displayed on the screen. α°αα 12.64.34011.31311.1984.340
Note:1. When you're using "line-laser" function, please keep the left side surface (the same side as line-laser) of the device parallel to the Measuring Range(m)Triangular Area MeasurementPythagoras (3-point) ①Trapezoid Measurement ①0.2-40/60/80/100 -5±(2.0mm+5x10 D) √ √ √ SpecificationMeasuring accuracyContinuous MeasurementArea Measurement√ √ Pythagoras (2-point) √ Pythagoras (3-point) ②√ Auto Height √ Bluetooth 4.0 Auto Level √ Rotary screenSingle Distance Measurement5‰ Volume Measurement √ 2.4 inch HD colored ±(0.3°+0.1°+0.01*D)421Wheel Measurement Accuracy Trapezoid Measurement ②Point to Point (P2P) MeasurementLaser Line Marking Function √ Add/Subtract √ Tilt SensorTilt Accuracy √ √ √ √ √ √ screen Display ScreenWheel Measurement √ 32. The angle of the laser line displayed on screen is not absolutely accurate, because of environment and inevitable and slight improper operation. The angle is for reference only. If you need highly accurate laser line, please use more accurate angle measuring tools.TopFigure AFront0°30°60°-60°-30°30°-30°-60°60°0°Figure Bwall, the angle of the line to horizon is displayed on screen(Figure A). Head up and head down the device, to project the line at different angles.(Figure B) Do not turn the head of the device left or right, or it will cause incorrect angle readings.Trouble shootingAll information will be showed as code or “Error”, the following are all codes and corresponding explain and solution.Andriod APPIOS APPRefer to user manual,repeat the procedures. 255256 Calculation errorReceived signal too weak or measurement time too longReceived signal too strong.Out of measuring range204Measuring the distance within measurement range. Code Cause Corrective Measure220 Low battery Replace batteries or charge the batteriesHardware errorSwitch on/off the device, if the symbol still appears after several times, please contact with your dealer.261500Improve the reflective surface. (Use target plate, or don't aim at strong light)Improve the reflective surface. (Use target plate, white paper)Class 2Laser Type 630-670nm,＜1mWMemoryAuto Power offProtection Classm / ft / in / ft+in Front/Tripod/Rear50 valuesAfter 180s of inactivityMeasuring UnitLaser ClassIP65Measuring Reference Voice Broadcast Chinese/EnglishBPI AAA 800(NI-MH rechargeable battery)3*AAA alkraine battery poweredBattery TypeCharging InterfaceStorage TemperatureAltitude up to 2000mHumidity 0-95%Size(mm) 137x55x26 -20℃~70℃(-4°F~158°F)Operating Temperature Weight(g) 132 0℃~+40℃(32°F~+104°F)USB-C4. Tilt Accuracy0.1° is caused by temperature, D is +/- 0~45°, eg: at normal temperature the accuracy is +/-0.3° at angle of 0°，at abnormal temperature the accuracy is +/-0.85° at angle of 45° .1. Measuring RangeThe Rear is the default reference. The maximum range shall be different according to different models. The actual range refers to the package. Measuring Accuracy (“D” is the measured length)2.If measuring under favorable conditions, such as smooth surface, proper temperature and indoor lighting, the device is able to work within certain range as indicated. Maximum deviation occurs under unfavorable conditions such as bright sunlight or when measuring to poorly reflecting or very rough surfaces.Tips: In case of bright sunlight and bad reflection of the object, please use the target plate or reflector.3. Wheel Measurement AccuracyNote: Please keep the device moving smoothly while measuring, Mileseey Pro APP Download The product specifications are subject to change without notice, all final interpretation rights were reserved by Mileseey Technology Co., Ltd. All trademarks, product images, technical parameters are properties of Mileseey Technology Co., Ltd. All rights reserved.CopyrightsFax: +86 755 86701592Email: info@mileseey.net Contact UsShenzhen Mileseey Technology Co., LTD.Telephone: +86 755 86329055Website: www.mileseey.net Add.: 6/F, Building 9, Zhongguan Honghualing Industrial South Park II, 1213 Liuxian Ave, Taoyuan Street, Nanshan District, Shenzhen, 518055, P.R. China.Model nameDate of purchaseUser InfoUser NameAddress &Tel.warranty periodDealerDealer’s name, address, tel.Serial NumberFault DescriptionInvoice Code Warranty CardWarranty periodThis laser distance meter has two years warranty in the precondition of non-artificial damage. Within the warranty period, certain maintenance costs will be charged under following casesDamages caused by improper usage or maintenance of the tool;The tool had been disassembled or mended by non-authorized third party;Without the warranty card or the purchase invoice;The serial number on the warranty card is different with the one on product; The serial number has been altered or abraded;Damaged by any force majeure factors;Replacement of the worn out accessories；Damages caused by the abnormal factors such as the temperature/humidity in usage;Damages caused by the improper operation.Please send the tool with warranty card & purchase invoice to local dealer if maintenance needed. The warranty card will not be reissued if lost; please keep it carefully for maintenance. Warranty Terms

Navigation menu