Miller Electric 700 Users Manual A AD5 0 Dynasty 350

700 to the manual 9c8417f7-3b1b-4a3c-a35d-72ab19e6dea2

2015-02-02

: Miller-Electric Miller-Electric-700-Users-Manual-437128 miller-electric-700-users-manual-437128 miller-electric pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

Dynasty 350 and 700
®

Quick
Specs

Industrial Applications

Processes

Precision Fabrication
Heavy Fabrication
Pipe and Tube Fabrication
Aerospace
Aluminum Ship Repair
Anodized Aluminum Fabrication

TIG (GTAW)
Pulsed TIG (GTAW-P)
Stick (SMAW)
Air Carbon Arc (CAC-A)
350: 1/4 in maximum
700: 3/8 in maximum

Issued Oct. 2008 • Index No. AD/5.0

TIG/Stick Welding
Power Source

Input Power 208 – 575 V, 3- or 1-Phase
Amperage Range 350: 5 – 350 A
700: 5 – 700 A

Rated Output

350: 300 A at 32 V, 60% Duty Cycle
700: 600 A at 44 V, 60% Duty Cycle

Weight

350: 135.5 lb (61 kg)
700: 198 lb (90 kg)

The Power of Blue .

AC TIG Features
Independent Amplitude/Amperage
Control allows EP and EN
amperages to be set independently
to precisely control heat input to the
work and electrode.
Extended AC balance (30–99%)
controls the amount of oxide
cleaning (amperage time in EN)
which is essential for high quality
welds on aluminum.
AC frequency (20–400 hz) controls
the width of the arc cone and the
force of the arc.

Allows for any
input voltage
hookup (208–575 V) with no manual linking,
providing convenience in any job setting.
Ideal solution for dirty or unreliable power.

NEW! Meter Calibration allows meters to
be calibrated for certification.
120 V auxiliary power receptacle for
cooling system or small tools.
Wind Tunnel Technology™ protects internal
electrical components from airborne
contaminants, extending the product life.
Fan-On-Demand™ power source cooling
system operates only when needed,
reducing noise, energy use and the amount
of contaminants pulled though the machine.
TIGRunner® packages feature a
3.5 gallon (13.2 L) cooling system. The
cart is equipped with cylinder carrying
capabilities, filler rod holder, foot pedal
holder, torch and cable holders. A pullout
drawer provides additional storage for torch
consumables and tools. See page 6.
Programmable start parameters allow
independent starting conditions based
on process and memory selections
(amperage, time and polarity).
Program memory features 9 independent
program memories that maintain/save
your parameters.
High-frequency arc starter for
non-contact arc initiation.
Lift-Arc™ start provides AC or DC arc
starting without the use of high frequency

AC Waveforms

Dynasty 700
Dynasty 350

Stick Features (AC/DC)
Tailored arc control (DIG) allows the arc characteristic
to be changed for specific applications and electrodes.
Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start™ adaptive control provides positive arc starts
without sticking.
AC frequency control adds additional stability when Stick
welding in AC for smoother welds.

Auto-Postflow calculates the length of
postflow time based on the amperage setting.
This eliminates the need to independently set
the postflow time for different amperages.
This feature preserves your tungsten and
Power source is warranted for 3 years, parts and labor.
prevents porosity.
Original main power rectifier parts are warranted for 5 years.

Advance Squarewave, fast
freezing puddle, deep
penetration and fast travel speeds.
Soft Squarewave for a soft
buttery arc with maximum
puddle control and good wetting action.
Sine wave for customers
that like a traditional arc.
Quiet with good wetting.
Triangular wave reduces the
heat input and is good on
thin aluminum. Fast travel speeds.

DC TIG Features
Exceptionally smooth and precise
arc for welding exotic materials.
High-Speed DC TIG Pulse Control
Pulse frequency capable of pulsing
5000 pulses per second. Pulsing
adds arc stability, reduces heat input
and warpage and can increase travel
speeds. Other parameters include
peak amperage, peak time and
background amperage.

Miller Electric Mfg. Co.

International Headquarters

Web Site

An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA

Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125

www.MillerWelds.com

Specifications
Model

(Subject to change without notice.)

Welding
Max.
Amperage Open-Circuit
Range
Voltage

Input
Power

Dynasty Three350
Phase

5 – 350 A

SinglePhase

5 – 350 A

Dynasty Three700
Phase

5 – 700 A

SinglePhase

5 – 700 A

75 VDC
10 –15 VDC*

Rated
Output

Amps Input at Rated Load Output, 50/60 Hz
208 V 230 V 400 V 460 V 575V KVA KW

250 A at 30 V,
100% Duty Cycle

10.3

9.9

300 A at 32 V,
60% Duty Cycle

12.7

12.1

180 A at 27.2 V,
100% Duty Cycle

—

7.4

6.8

225 A at 29 V,
60% Duty Cycle

—

9.8

9.1

500 A at 40 V,
100% Duty Cycle

600 A at 44 V,
60% Duty Cycle

360 A at 34 V,
100% Duty Cycle

—

450 A at 38 V,
60% Duty Cycle

115

104

—

Dimensions

Net
Weight

H: 24-3/4 in (629 mm)
W: 13-3/4 in (349 mm)
D: 22 in (559 mm)

135.5 lb
(61 kg)

with TIGRunner®
H: 45-1/8 in (1146 mm)
W: 23-1/8 in (587 mm)
D: 43-3/4 in (1111 mm)

with
TIGRunner®
308 lb
(140 kg)

H: 34-5/8 in (879 mm)
W: 13-3/4 in (349 mm)
D: 22 in (559 mm)

198 lb
(90 kg)

with TIGRunner®
H: 55-1/8 in (1400 mm)
W: 23-1/8 in (587 mm)
D: 43-3/4 in (1111 mm)

with
TIGRunner®
370 lb
(168 kg)

Conforms to European standards.

Certified to both the Canadian and U.S. Standards for welding equipment.
*Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick.

Control Panel
11
12
10

Control Panel Parameter Values
1. Memory

2. Polarity
3. Process/
Arc Starting
4. Output Control

36 Combinations
(9 AC TIG)
(9 AC Stick)
(9 DC TIG)
(9 DC Stick)
AC/DC
TIG: HF Impulse, Lift Arc
STICK: Adaptive Hot Start
Standard Remote,
2T Trigger Hold,
Output ON

5. Pulser Control
Pulses per Second DC: 0.1– 5000 PPS
AC: 0.1–500 PPS
Peak Time
5 – 95%
Background Amps 5 – 95%
6. Sequencer Control
Initial Amps
Dynasty 350: 5 –350 A
Dynasty 700: 5– 700 A
Initial Slope
0.0 – 50.0 Seconds
Final Slope
0.0– 50.0 Seconds
Final Amps
Dynasty 350: 5 –350 A
Dynasty 700: 5– 700 A

7. Gas/DIG Preflow 0.0– 25.0 Seconds
Postflow
Auto Postflow,
Adjust 0.0–50 Seconds
DIG
0–100%
8. AC Waveshape
EN Amperage
5–350 A/5– 700 A
EP Amperage
5–350 A/5 – 700 A
Balance
30 – 99%
AC Frequency
20– 400 Hz
9. Amperage Control
10. Encoder Control
11. Ammeter Display
12. Voltmeter Display
Additional Setup Parameter Values
Programmable Starts
Amperage
5– 200 A
Time
1– 200 Milliseconds
Polarity
EP, EN
Additional Triggers 3T, 4T, Mini Logic,
4T Momentary
Waveshapes
Advance Squarewave,
Soft Squarewave, Sine
Wave, Triangular wave
Amplitude Lock EN EP Same,
EN EP Independent
Spot/Weld Timer 0.0 – 999 Seconds
OCV
Low OCV, Normal OCV
Lockouts
Four levels
Arc Timer
0.0– 9999 Hours
and 0–59 Min
Cycle Counter
0– 999,999 Cycles
Meter Calibration ±0– 20.0 Amps
±0– 20.0 Volts

Performance Data
ANNUAL POWER COST OF OPERATION

DUTY CYCLE
Maxstar 350

Maxstar 700

3-PHASE
%
AMPERAGE

0 – 30%
60%
100%

350 A
300 A
250 A

0 – 30%
60%
100%

350 A
250 A
225 A
180 A

$1,600

3-PHASE
%
AMPERAGE

1-PHASE
%
AMPERAGE

0 – 10%
30%
60%
100%

Annual power costs based on one 8 hour shift (40 hrs/wk).
Power cost of $0.08/kWh.

700 A
600 A
500 A

$1,200

D
T

D= Dynasty T= Traditional

$1,000
D

$800

1-PHASE
%
AMPERAGE

0 – 10%
30%
60%
100%

25% ARC ON= 2 HOURS/SHIFT
50% ARC ON= 4 HOURS/SHIFT
75% ARC ON= 6 HOURS/SHIFT

$1,400

$600

700 A
500 A
450 A
360 A

$400
$200

D
D

T
100

150
200
AMPERAGE

250

300

350

TIG Upgrade Chart
Which Machine is Right for You?
Why Upgrade?

Syncrowave 350

Dynasty 350

Dynasty 350 Benefits

Maximum Thickness Capacity

1/2 in Aluminum

UPGRADE

5/8 in Aluminum

Increases aluminum thickness.

High Frequency Arc Starting

Continuous HF

UPGRADE

Start Only

Start Only limits HF interference issues.

Frequency Control
AC Output Control

Fixed at 60 Hz

UPGRADE

Variable 20–400 Hz

Higher frequencies provide better arc control
and faster travel speeds.

AC Waveforms

Soft Squarewave

UPGRADE

Advanced Squarewave

Soft Squarewave

Advanced Squarewave=Travel faster
Soft Squarewave= Maximum puddle control

Sine Wave

Triangular Wave

Sine Wave= Traditional characteristics
Triangular Wave= Reduced heat input

Weld Aluminum
with Pointed Tungsten

Waveshaping controls maintain the point. The
benefits are: reduced heat input into your part,
smaller weld beads, better starting and more
control of the arc.

UPGRADE

Portability

496 lb
Manual Links
208/230/460 V
Single-Phase

UPGRADE

135 lb
Auto-Line™
208–575 V
Single-Phase or Three-Phase

Easier to move because of size and weight.
Auto-Line™ allows the unit to operate on any
voltage. Single- or three-phase. Even generators!

Power Draw at 300 Amps

110 A at 230 V
Single-Phase

UPGRADE

32 A at 230 V
Three-Phase

Power requirement to operate is much less.
Smaller electrical service needed, smaller
breaker/fuses and power cord.

Precise Controls

Some Digital Controls UPGRADE

All Digital Controls

Accuracy and repeatability with all digital controls.

AC Waveshape Controls
Feature

Waveform

AC Balance Control

51 – 99% EN

Amperage

Controls arc cleaning action. Adjusting the
% EN of the AC wave controls the width of
the etching zone surrounding the weld.

Effect on Bead

% EP

Bead

% EN
Time (1 AC Cycle)

Deep, narrow
penetration

Amperage

30 – 50% EN
% EP

Increases balling
action of the electrode

No Visible Cleaning
Wider bead and
cleaning action

Bead

% EN
Time (1 AC Cycle)

60 Cycles per Second

AC Frequency Control
Amperage

Narrow bead, with no
visible cleaning

Note: Set the AC Balance control for adequate arc
cleaning action at the sides and in front of the weld
puddle. AC Balance should be fine tuned according to
how heavy or thick the oxides are.

Controls the width of the arc cone. Increasing
the AC Frequency provides a more focused arc
with increased directional control.

Reduces balling
action and helps
maintain point

Effect on Appearance

% EP

Shallow
penetration
Wider bead,
good penetration —
ideal for buildup work

Cleaning
Wider bead and
cleaning action

Bead

% EN

Note: Decreasing the AC Frequency softens the arc
and broadens the weld puddle for a wider weld bead.

Time (1 AC Cycle)

Amperage

120 Cycles per Second
%
EP

%
EP

Cleaning
Narrower bead for
fillet welds and
automated applications

Narrower bead and
cleaning action
Bead

% EN

Time (1 AC Cycle)

EP+
EN –

More current in
EN than EP:
Deeper penetration
and faster travel
speeds

Time

Current

Allows the EN and EP amperage values to be
set independently. Adjusts the ratio of EN to
EP amperage to precisely control heat input
to the work and the electrode. EN amperage
controls the level of penetration, while EP
amperage dramatically effects the arc cleaning
action along with the AC Balance control.

Current

Independent AC Amperage Control

Cleaning

EP+

EN –

Narrow bead, with no
visible cleaning

Bead
No Visible Cleaning

More current
in EP than EN:
Shallower
penetration

Wider bead and
cleaning action

Bead
Time

Cleaning

AC Waveshape Controls (Continued)
AC Waveform Selection
Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from:

ADVANCED SQUAREWAVE

SOFT SQUAREWAVE

All the benefits of
advanced square,
fine tuned to provide
a smooth, soft arc
with maximum
puddle control and
good wetting action.

(+)
Fast transitions for
responsive and
dynamic arc.

0
(–)

Amps

(+)

0
(–)
Time (1 AC Cycle)

Time (1 AC Cycle)

SINEWAVE

0
(–)

(+)
Amps

Square transitions
eliminate the need for
continuous HF, while
the sinewave peaks
soften the arc.

(+)
Amps

TRIANGULAR WAVE

0
(–)

Time (1 AC Cycle)

Unconventional wave
provides the punch of
the peak amperage,
while reducing overall
heat input. Quick puddle
formation reduces weld
time — limiting heat
input and reducing weld
distortion, especially
on thin materials.

Pulse TIG Controls
High Speed DC TIG-Pulse Controls
• PPS Pulses per second (Hz): DC = 0.1 – 5,000 PPS / AC = 0.1 – 500 PPS
• % ON – % Peak Time: 5 - 95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
• Background Amps: 5 – 99% (Sets the low-pulse amperage value as a % of the Peak Amps.)

CONVENTIONAL PULSED TIG
Peak
Amps

Peak Time %

Background
Amps
(% of Peak)

HIGH SPEED PULSED TIG
Peak
Amps

Peak Time %

Background
Amps
(% of Peak)
Pulse Cycle

Typically from 1 to 10 PPS. Provides a heating and cooling effect
on the weld puddle and can reduce distortion by lowering the
average amperage. This heating and cooling effect also produces a
distinct ripple pattern in the weld bead. The relationship between
pulse frequency and travel speed determines the distance between
the ripples. Slow pulsing can also be coordinated with filler metal
addition and can increase overall control of the weld puddle.

Pulse Cycle

In excess of 40 PPS, Pulsed TIG becomes more audible than visible —
causing increased puddle agitation for a better as-welded microstructure.
Pulsing the weld current at high speeds — between a high Peak and a
low Background amperage — can also constrict and focus the arc.
This results in maximum arc stability, increased penetration and
increased travel speeds (Common Range: 100 – 500 PPS).
The Arc-Sharpening effects of high speed pulsing are expanded to new
dimensions. The ability to pulse at 5,000 PPS further enhances arc
stability and concentration potential — which is extremely beneficial to
automation where maximum travel speeds are required.

Packages and Torch Kits
Dynasty Power Sources
®

Dynasty® 350 #907 204 (CSA)
(Auto-Line™ 208–575 VAC)

Dynasty® 700 #907 101 (CSA)
(Auto-Line™ 208–575 VAC)

Dynasty® 350 #907 204-02-1 (CE)
(Auto-Line™ 380–575 VAC)

Dynasty® 700 #907 101-02-1 (CE)
(Auto-Line™ 380–575 VAC)

8 ft (2.4 m) primary cord, (2) international
(Dinse 50) connectors, and CD-ROM Setup
and Simulator.

(2) thread lock weld cable connectors
(#225 029), (1) water-cooled thread lock
torch adapter (#225 028) for #18 or #20
torches, and CD-ROM Setup and Simulator.

Note: TIG torch adapter must be ordered separately.

Note: Primary cord and TIG torch must be ordered
separately.

TIGRunner Packages
®

Dynasty 350 TIGRunner®
#907 204-01-1 (CSA)

Dynasty 700 TIGRunner®
#907 101-01-1 (CSA)

Completely assembled.
Package includes:
Dynasty® 350 (#907 204)
RFCS-14 HD foot control
Coolmate™ 3.5 Coolant System
Cart with the following features:
single cylinder rack, foot pedal holder,
(3) cable/torch holders, (2) TIG electrode
filler holders and a convenient drawer
for tungsten and consumable storage

Completely assembled.
Package includes:
Dynasty® 700 (#907 101)
RFCS-14 HD foot control
Coolmate™ 3.5 Coolant System
Cart with the following features:
single cylinder rack, foot pedal holder,
(3) cable/torch holders, (2) TIG electrode
filler holders and a convenient drawer
for tungsten and consumable storage

Note: Torch package and coolant must be ordered
separately.

Complete Packages
Dynasty 350 Complete
#951 074 (CSA)

Dynasty 700 Complete
#951 075 (CSA)

Completely assembled.

Completely assembled.
Package includes:
Dynasty® 700 TIGRunner (#907 101-01-1)
25 ft (7.6 m) Weldcraft WP18SC
water-cooled torch
Torch cable cover
AK18C Torch Accessory Kit includes
shielding cups, collets, collet bodies and
2% cerium tungsten electrodes (3/32,
1/8 and 5/32 in)
Smith regulator/flowmeter H1954D-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled thread lock torch adapter
12 ft (3.7 m) 4/0 weld lead with clamp
(work or ground lead)
4 gallons of pre-mixed low-conductivity
coolant (#043 810)

Package includes:
Dynasty® TIGRunner® (#907 204-01-1)
25 ft (7.6 m) Weldcraft CS310
water-cooled torch
Torch cable cover
CS310AKC torch accessory kit includes
shielding cups, collets, collet bodies,
and 2% cerium tungsten electrodes
(1/16, 3/32, and 1/8 in)
Smith regulator/flowmeter HM2051A-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled Dinse torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp
(work or ground lead) and Dinse
connector
4 gallons of pre-mixed low-conductivity
coolant (#043 810)

Genuine Miller Accessories
Torch Kits
250 A Water-Cooled Torch Kit #300 185
25 ft (7.6 m) Weldcraft® WP20 torch
Torch cable cover
AK4C torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(1/16, 3/32 and 1/8 in)
Smith® regulator/flowmeter HM2051A-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled Dinse torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp
(work or ground lead) and Dinse connector

300 A Water-Cooled Torch Kit #300 183
Recommended for Dynasty 350
25 ft (7.6 m) Weldcraft® CS310 torch
Torch cable cover
CS310AKC torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(1/16, 3/32 and 1/8 in)
Smith® regulator/flowmeter HM2051A-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled Dinse torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp
(work or ground lead) and Dinse connector

400 A Water-Cooled Torch Kit #300 186
Recommended for Dynasty 700
25 ft (7.6 m) Weldcraft® WP18SC torch
Torch cable cover
AK18C torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(3/32, 1/8 and 5/32 in)
Smith® regulator/flowmeter H1954D-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled thread lock torch adapters
12 ft (3.7 m) 4/0 weld lead with clamp
(work or ground lead)

Runner Cart
#300 244
Designed to accommodate the Dynasty®
or Maxstar® 350 or
700 power sources
and the Coolmate™
3.5 Cooler. Cart
features: single
cylinder rack,
foot pedal holder,
(3) cable/torch
holders, (2) TIG electrode filler holders
and a convenient drawer for tungsten and
consumable storage.

TIG Welding Gloves
#227 813 Small
#227 815 Large
#227 814 Medium
#227 816 X-Large
Made from soft grain goatskin. Sewn with
Kevlar® thread. Order from Miller Parts.

Remote Controls and Switches

Coolmate™ 3.5
#300 245
Designed to integrate
with the Dynasty®
and Maxstar® 350
and 700 power
sources. For use with water-cooled torches
rated up to 600 amps. 3.5 gallon capacity.

Educational Materials

TIG Coolant #043 810
Sold in multiples of 4. Pre-mixed lowconductivity Miller coolant contains ethylene
glycol and deionized water to protect from
freezing and boiling -37˚ to 227˚F (-38˚ to
108˚C). 1-gallon plastic recyclable bottles.

Automation Interface Kit #300 549
Field Includes automation PC board, 28-pin
socket receptacle with harness, 28-pin plug
connector. Provides required and advanced
automation controls.
Weld Current Sensor #195 516
Detects when work clamp is not connected
and prevents expensive damage to
disconnect devices and input power cord
and wiring.
To order these items, distributors can call
the Miller Literature Distribution Center at
1-920-735-4356, or FAX 1-920-735-4011.

Gas Tungsten Arc (TIG) Welding Book
#170 555
CD-ROM #233 558
Simulator and setup video (included with
machine).

Tungsten
Tungsten is 7 in length and available in pkgs of 10.
Order from Miller Parts.

Water-Cooled
Dinse #195 377
For Dynasty and
Maxstar® 350.
Used to adapt WP20, WP18, and CS310 to
dinse-style connector. Order from Miller Parts.

2% Ceriated (orange) for AC/DC applications
#WC040X7 .040 in, 10– 80 A
#WC116X7 1/16 in, 70– 150 A
#WC332X7 3/32 in, 140– 250 A
#WC018X7 1/8 in, 225– 400 A
#WC532X7 5/32 in, 300– 500 A

Water-Cooled Thread Lock
#225 028
For Dynasty and Maxstar 700.
Used with (WP125, WP24W,
WP25, WP20, WP18, WP12,
CS310, CS410, WP22, WP27)
water-cooled torch. Order from Miller Parts.

1.5% Lanthanum (gold) for AC/DC applications
#WL040X7 .040 in, 10– 80 A
#WL116X7 1/16 in, 70– 150 A
#WL332X7 3/32 in, 140– 250 A
#WL018X7 1/8 in, 225– 400 A
#WL532X7 5/32 in, 300– 500 A

RCCS-14 Remote
Contactor and Current
Control #043 688
14-pin plug. North/south rotary-motion
fingertip control fastens to TIG torch using
two Velcro® straps. Includes 26.5 ft (8 m)
control cord.
RFCS-14 HD Foot
Control #194 744
Maximum flexibility is
accomplished with a
reconfigurable cord that
can exit the front, back or either side of the
pedal. Foot pedal provides remote current
and contactor control. Includes 20 ft (6 m)
cord and 14-pin plug.
RHC-14 Hand Control #129 340
Miniature hand control for remote current
and contactor control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 83 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RMLS-14 Switch
#129 337
Momentaryand maintained-contact rocker switch for
contactor control. Push forward for
maintained contact and backward for
momentary contact. Includes 26.5 ft (8 m)
cord and 14-pin plug.
RMS-14
On/Off Control
#187 208
Momentary-contact switch for contactor
control. Rubber-covered pushbutton dome
switch ideal for repetitive on-off
applications. Includes 26.5 ft (8 m) cord
and 14-pin plug.
Extension Cords for 14-Pin Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (23 m)
7

Ordering Information
Equipment and Options

Stock No.

Description

Dynasty® 350

#907 204

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord

Qty.

Dynasty® 350 TIGRunner ®

#907 204-01-1

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord. Requires coolant

Dynasty® 350 Complete

#951 074

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord.

Dynasty® 350 International

#907 204-02-1

Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE. 8 ft primary cord

Dynasty® 700

#907 101

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA.

Dynasty® 700 TIGRunner ®

#907 101-01-1

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. Requires coolant

Dynasty® 700 Complete

#951 075

Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA.

Dynasty® 700 International

#907 101-02-1

Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE.

Weldcraft® 250 A Water-Cooled Torch Kit

#300 185

See page 7

Weldcraft® 300 A Water-Cooled Torch Kit

#300 183

See page 7. Recommended for Dynasty 350

Weldcraft® 400 A Water-Cooled Torch Kit

#300 186

TIG Torch Kits

Consumables and Tungsten

See page 7. Recommended for Dynasty 700
Distributor: See Miller Parts Catalog

Gas Cylinder, Hose and Fittings
Remote Controls
RCCS-14

#043 688

North/south fingertip control

RFCS-14 HD

#194 744

Heavy-duty foot control

RHC-14

#129 340

Hand control

RMLS-14

#129 337

Momentary/maintained rocker switch

RMS-14

#187 208

Momentary rubber dome switch

Extension Cords

#122 973
#122 974
#122 975

25 ft (7.6 m)
50 ft (15.2 m)
75 ft (22.9 m)

Runner™ Cart

#300 244

Coolmate™ 3.5

#300 245

TIG Coolant

#043 810

Automation Interface Kit

#300 549

Weld Current Sensor

#195 516

Gas Tungsten Arc (TIG) Welding Book

#170 555

CD-ROM

#233 558

See page 7
Requires coolant
Sold in multiples of 4. 1-gallon plastic bottles.
Field. Provides required automation connections
Field. Installation required.
Order at MillerWelds.com/resources/tools
Setup and simulator video (included with machine)
Supplied with power source and torch kits
For Dynasty/Maxstar 350
Used to connect water-cooled torch to Dinse terminal machine.
For WP20, WP18 and CS310 (adapter included in Complete Package)
Order from Miller Parts
Used to connect water-cooled torch to Dynasty/Maxstar 700.
Order from Miller Parts
Supplied with power source and torch kits
Used to connect weld lead to Dinse terminal machine
Used to connect weld lead to Dynasty 700 or Maxstar 700. Order from Miller Parts
Used to extend weld cables
Male Dinse to female Tweco
Male Dinse to female Cam-Lok

Accessories

Torch Adapters
Water-Cooled Dinse

#195 377

Water-Cooled Thread Lock

#225 028

Cable Connectors
Dinse Connector 50 mm (1 male)

#042 418

Thread Lock Connectors (2 male)

#225 029

Dinse Connector 50 mm (1 male, 1 female)

#042 419

Tweco Terminal Adapter

#042 465

Cam-Lok Terminal Adapter

#042 466

Miscellaneous
Stick Electrodes
Welding and Work Cables
Welding Gloves and Helmet
Date:

Total Quoted Price:

Distributed by:

Litho in USA

Price

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Producer                        : Acrobat Distiller 8.1.0 (Macintosh)
Format                          : application/pdf
Creator                         : Laura Vroman
Title                           : A AD5-0 Dynasty 350 700.qxd:A AD5-0 Dynasty 350 700
Modify Date                     : 2008:10:15 15:41:18-05:00
Creator Tool                    : QuarkXPress 7.31
Create Date                     : 2008:10:15 15:38:15-05:00
Metadata Date                   : 2008:10:15 15:41:18-05:00
Document ID                     : uuid:72473260-1225-4218-8dd0-ae4699457f1b
Instance ID                     : uuid:79e6e6a8-cf6a-426d-af41-d54febcee840
Page Count                      : 8
Author                          : Laura Vroman

EXIF Metadata provided by EXIF.tools

Miller Electric 700 Users Manual A AD5 0 Dynasty 350

700 to the manual 9c8417f7-3b1b-4a3c-a35d-72ab19e6dea2

Navigation menu

Versions of this User Manual:

Views

Navigation