Miller Electric 700 Users Manual A AD5 0 Dynasty 350

700 to the manual 9c8417f7-3b1b-4a3c-a35d-72ab19e6dea2

: Miller-Electric Miller-Electric-700-Users-Manual-437128 miller-electric-700-users-manual-437128 miller-electric pdf

Open the PDF directly: View PDF .
Page Count: 8

Processes

TIG (GTAW)

Pulsed TIG (GTAW-P)

Stick (SMAW)

Air Carbon Arc (CAC-A)

350: 1/4 in maximum

700: 3/8 in maximum

Input Power 208 – 575 V, 3- or 1-Phase

Amperage Range 350: 5 – 350 A

700: 5 – 700 A

Rated Output 350: 300 A at 32 V, 60% Duty Cycle

700: 600 A at 44 V, 60% Duty Cycle

Weight 350: 135.5 lb (61 kg)

700: 198 lb (90 kg)

Industrial Applications

Precision Fabrication

Heavy Fabrication

Pipe and Tube Fabrication

Aerospace

Aluminum Ship Repair

Anodized Aluminum Fabrication

Quick

Specs

Dynasty®350 and 700 TIG/Stick Welding

Power Source

Issued Oct. 2008 • Index No. AD/5.0

The Power of Blue®

.

Miller Electric Mfg. Co.

An Illinois Tool Works Company

1635 West Spencer Street

Appleton, WI 54914 USA

Web Site

www.MillerWelds.com

International Headquarters

Phone: 920-735-4505

USA FAX: 920-735-4134

Canadian FAX: 920-735-4169

International FAX: 920-735-4125

Power source is warranted for 3 years, parts and labor.

Original main power rectifier parts are warranted for 5 years.

Allows for any

input voltage

hookup (208–575 V) with no manual linking,

providing convenience in any job setting.

Ideal solution for dirty or unreliable power.

NEW!

Meter Calibration allows meters to

be calibrated for certification.

120 V auxiliary power receptacle for

cooling system or small tools.

Wind Tunnel Technology™protects internal

electrical components from airborne

contaminants, extending the product life.

Fan-On-Demand™power source cooling

system operates only when needed,

reducing noise, energy use and the amount

of contaminants pulled though the machine.

TIGRunner®packages feature a

3.5 gallon (13.2 L) cooling system. The

cart is equipped with cylinder carrying

capabilities, filler rod holder, foot pedal

holder, torch and cable holders. A pullout

drawer provides additional storage for torch

consumables and tools. See page 6.

Programmable start parameters allow

independent starting conditions based

on process and memory selections

(amperage, time and polarity).

Program memory features 9 independent

program memories that maintain/save

your parameters.

High-frequency arc starter for

non-contact arc initiation.

Lift-Arc™start provides AC or DC arc

starting without the use of high frequency

Auto-Postflow calculates the length of

postflow time based on the amperage setting.

This eliminates the need to independently set

the postflow time for different amperages.

This feature preserves your tungsten and

prevents porosity.

Stick Features (AC/DC)

Tailored arc control (DIG) allows the arc characteristic

to be changed for specific applications and electrodes.

Smooth running 7018 or stiffer, more penetrating 6010.

Hot Start™adaptive control provides positive arc starts

without sticking.

AC frequency control adds additional stability when Stick

welding in AC for smoother welds.

AC TIG Features

Independent Amplitude/Amperage

Control allows EP and EN

amperages to be set independently

to precisely control heat input to the

work and electrode.

Extended AC balance (30–99%)

controls the amount of oxide

cleaning (amperage time in EN)

which is essential for high quality

welds on aluminum.

AC frequency (20–400 hz) controls

the width of the arc cone and the

force of the arc.

AC Waveforms

Advance Squarewave, fast

freezing puddle, deep

penetration and fast travel speeds.

Soft Squarewave for a soft

buttery arc with maximum

puddle control and good wetting action.

Sine wave for customers

that like a traditional arc.

Quiet with good wetting.

Triangular wave reduces the

heat input and is good on

thin aluminum. Fast travel speeds.

DC TIG Features

Exceptionally smooth and precise

arc for welding exotic materials.

High-Speed DC TIG Pulse Control

Pulse frequency capable of pulsing

5000 pulses per second. Pulsing

adds arc stability, reduces heat input

and warpage and can increase travel

speeds. Other parameters include

peak amperage, peak time and

background amperage.

Dynasty 700

Dynasty 350

2

Control Panel

Input

Power

Three-

Phase

Single-

Phase

Three-

Phase

Single-

Phase

Rated

Output

250 A at 30 V,

100% Duty Cycle

300 A at 32 V,

60% Duty Cycle

180 A at 27.2 V,

100% Duty Cycle

225 A at 29 V,

60% Duty Cycle

500 A at 40 V,

100% Duty Cycle

600 A at 44 V,

60% Duty Cycle

360 A at 34 V,

100% Duty Cycle

450 A at 38 V,

60% Duty Cycle

Welding

Amperage

Range

5 – 350 A

5 – 350 A

5 – 700 A

5 – 700 A

Model

Dynasty

350

Dynasty

700

Max.

Open-Circuit

Voltage

75 VDC

10 –15 VDC*

75 VDC

10 –15 VDC*

75 VDC

10 –15 VDC*

75 VDC

10 –15 VDC*

Net

Weight

135.5 lb

(61 kg)

with

TIGRunner®

308 lb

(140 kg)

198 lb

(90 kg)

with

TIGRunner®

370 lb

(168 kg)

Specifications (Subject to change without notice.)

Amps Input at Rated Load Output, 50/60 Hz

208

V 230 V 400 V 460 V 575V KVA KW

29 26 15 13 10 10.3 9.9

35 32 18 16 13 12.7 12.1

35 32 — 15 12 7.4 6.8

47 43 — 21 17 9.8 9.1

75 68 39 34 27 27 26

97 88 51 44 35 35 34

82 74 — 37 30 17 16

115 104 — 52 42 24 22

Dimensions

H: 24-3/4 in (629 mm)

W: 13-3/4 in (349 mm)

D: 22 in (559 mm)

with TIGRunner®

H: 45-1/8 in (1146 mm)

W: 23-1/8 in (587 mm)

D: 43-3/4 in (1111 mm)

H: 34-5/8 in (879 mm)

W: 13-3/4 in (349 mm)

D: 22 in (559 mm)

with TIGRunner®

H: 55-1/8 in (1400 mm)

W: 23-1/8 in (587 mm)

D: 43-3/4 in (1111 mm)

Conforms to European standards.

Certified to both the Canadian and U.S. Standards for welding equipment.

*Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick.

1. Memory 36 Combinations

(9 AC TIG)

(9 AC Stick)

(9 DC TIG)

(9 DC Stick)

2. Polarity AC/DC

3. Process/ TIG: HF Impulse, Lift Arc

Arc Starting STICK: Adaptive Hot Start

4. Output Control Standard Remote,

2T Trigger Hold,

Output ON

5.Pulser Control

Pulses per Second DC: 0.1– 5000 PPS

AC: 0.1–500 PPS

Peak Time 5 – 95%

Background Amps 5 – 95%

6. Sequencer Control

Initial Amps Dynasty 350: 5 –350 A

Dynasty 700: 5– 700 A

Initial Slope 0.0 – 50.0 Seconds

Final Slope 0.0– 50.0 Seconds

Final Amps Dynasty 350: 5 –350 A

Dynasty 700: 5– 700 A

7. Gas/DIG Preflow 0.0– 25.0 Seconds

Postflow Auto Postflow,

Adjust 0.0–50 Seconds

DIG 0–100%

8. AC Waveshape

EN Amperage 5–350 A/5– 700 A

EP Amperage 5–350 A/5 – 700 A

Balance 30 – 99%

AC Frequency 20– 400 Hz

9. Amperage Control

10. Encoder Control

11. Ammeter Display

12. Voltmeter Display

Additional Setup Parameter Values

Programmable Starts

Amperage 5– 200 A

Time 1– 200 Milliseconds

Polarity EP, EN

Additional Triggers 3T, 4T, Mini Logic,

4T Momentary

Waveshapes Advance Squarewave,

Soft Squarewave, Sine

Wave, Triangular wave

Amplitude Lock EN EP Same,

EN EP Independent

Spot/Weld Timer 0.0 – 999 Seconds

OCV Low OCV, Normal OCV

Lockouts Four levels

Arc Timer 0.0– 9999 Hours

and 0–59 Min

Cycle Counter 0– 999,999 Cycles

Meter Calibration ±0– 20.0 Amps

±0– 20.0 Volts

f

13 10

9

11

12

1

23 64 5 78

Control Panel Parameter Values

UPGRADE

UPGRADE

UPGRADE

UPGRADE

UPGRADE

UPGRADE

UPGRADE

UPGRADE

1/2 in Aluminum

Continuous HF

Fixed at 60 Hz

Soft Squarewave

496 lb

Manual Links

208/230/460 V

Single-Phase

110 A at 230 V

Single-Phase

Some Digital Controls

Maximum Thickness Capacity

High Frequency Arc Starting

Frequency Control

AC Output Control

AC Waveforms

Weld Aluminum

with Pointed Tungsten

Portability

Power Draw at 300 Amps

Precise Controls

Increases aluminum thickness.

Start Only limits HF interference issues.

Higher frequencies provide better arc control

and faster travel speeds.

Advanced Squarewave=Travel faster

Soft Squarewave= Maximum puddle control

Sine Wave= Traditional characteristics

Triangular Wave= Reduced heat input

Waveshaping controls maintain the point. The

benefits are: reduced heat input into your part,

smaller weld beads, better starting and more

control of the arc.

Easier to move because of size and weight.

Auto-Line™ allows the unit to operate on any

voltage. Single- or three-phase. Even generators!

Power requirement to operate is much less.

Smaller electrical service needed, smaller

breaker/fuses and power cord.

Accuracy and repeatability with all digital controls.

5/8 in Aluminum

Start Only

Variable 20–400 Hz

Advanced Squarewave Soft Squarewave

Sine Wave Triangular Wave

135 lb

Auto-Line™

208–575 V

Single-Phase or Three-Phase

32 A at 230 V

Three-Phase

All Digital Controls

Why Upgrade? Syncrowave 350 Dynasty 350 Dynasty 350 Benefits

3

TIG Upgrade Chart

Maxstar 350

3-PHASE

AMPERAGE

350 A

300 A

250 A

%

0 – 30%

60%

100%

Maxstar 700

3-PHASE

AMPERAGE

700 A

600 A

500 A

%

0 – 30%

60%

100%

1-PHASE

AMPERAGE

350 A

250 A

225 A

180 A

%

0 – 10%

30%

60%

100%

1-PHASE

AMPERAGE

700 A

500 A

450 A

360 A

%

0 – 10%

30%

60%

100%

DUTY CYCLE

Performance Data

$-

$200

$400

$600

$800

$1,000

$1,200

$1,400

$1,600

50 100 150 200 250 300 350

ANNUAL POWER COST OF OPERATION

AMPERAGE

Annual power costs based on one 8 hour shift (40 hrs/wk).

Power cost of $0.08/kWh.

25% ARC ON= 2 HOURS/SHIFT

50% ARC ON= 4 HOURS/SHIFT

75% ARC ON= 6 HOURS/SHIFT

D= Dynasty T= Traditional

DT

DT

DT

DT

DT

D

D

T

T

Which Machine is Right for You?

4

AC Waveshape Controls

Feature Waveform Effect on Bead Effect on Appearance

0

Current

EN –

EP+

Time

0

Current

EN –

EP+

Time

Independent AC Amperage Control

Allows the EN and EP amperage values to be

set independently. Adjusts the ratio of EN to

EP amperage to precisely control heat input

to the work and the electrode. EN amperage

controls the level of penetration, while EP

amperage dramatically effects the arc cleaning

action along with the AC Balance control.

More current

in EP than EN:

Shallower

penetration

More current in

EN than EP:

Deeper penetration

and faster travel

speeds

Cleaning

Narrow bead, with no

visible cleaning

No Visible Cleaning

Bead

Wider bead and

cleaning action

Bead

Cleaning

Wider bead and

cleaning action

Bead

AC Frequency Control

Controls the width of the arc cone. Increasing

the AC Frequency provides a more focused arc

with increased directional control.

Note: Decreasing the AC Frequency softens the arc

and broadens the weld puddle for a wider weld bead.

Narrower bead for

fillet welds and

automated applications

Wider bead,

good penetration —

ideal for buildup work

Cleaning

Narrower bead and

cleaning action

Bead

AC Balance Control

Controls arc cleaning action. Adjusting the

% EN of the AC wave controls the width of

the etching zone surrounding the weld.

Note: Set the AC Balance control for adequate arc

cleaning action at the sides and in front of the weld

puddle. AC Balance should be fine tuned according to

how heavy or thick the oxides are.

Increases balling

action of the electrode

Reduces balling

action and helps

maintain point

Cleaning

Narrow bead, with no

visible cleaning

No Visible Cleaning

Bead

Wider bead and

cleaning action

Bead

0

Amperage

% EN

% EP

% EN

% EP

Time (1 AC Cycle)

Time (1 AC Cycle)

0

Amperage

30 – 50% EN

51 – 99% EN

Deep, narrow

penetration

Shallow

penetration

0

Amperage

% EN

% EP

% EN% EN

%

EP

%

EP

0

Amperage

120 Cycles per Second

60 Cycles per Second

Time (1 AC Cycle)

Time (1 AC Cycle)

5

SINEWAVE TRIANGULAR WAVE

ADVANCED SQUAREWAVE SOFT SQUAREWAVE

AC Waveform Selection

Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from:

High Speed DC TIG-Pulse Controls

• PPS Pulses per second (Hz): DC = 0.1 – 5,000 PPS / AC = 0.1 – 500 PPS

• % ON – % Peak Time: 5 - 95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)

• Background Amps: 5 – 99% (Sets the low-pulse amperage value as a % of the Peak Amps.)

Fast transitions for

responsive and

dynamic arc.

0

Amps

Time (1 AC Cycle)

Square transitions

eliminate the need for

continuous HF, while

the sinewave peaks

soften the arc.

0

Amps

Unconventional wave

provides the punch of

the peak amperage,

while reducing overall

heat input. Quick puddle

formation reduces weld

time — limiting

heat

input and reducing

weld

distortion, especially

on thin materials.

0

Amps

All the benefits of

advanced square,

fine tuned to provide

a smooth, soft arc

with maximum

puddle control and

good wetting action.

0

(+)

(–)

(+)

(–)

(+)

(–)

(+)

(–)

Amps

CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG

Typically from 1 to 10 PPS. Provides a heating and cooling effect

on the weld puddle and can reduce distortion by lowering the

average amperage. This heating and cooling effect also produces a

distinct ripple pattern in the weld bead. The relationship between

pulse frequency and travel speed determines the distance between

the ripples. Slow pulsing can also be coordinated with filler metal

addition and can increase overall control of the weld puddle.

Peak

Amps

Background

Amps

(% of Peak)

In excess of 40 PPS, Pulsed TIG becomes more audible than visible —

causing increased puddle agitation for a better as-welded microstructure.

Pulsing the weld current at high speeds — between a high Peak and a

low Background amperage — can also constrict and focus the arc.

This results in maximum arc stability, increased penetration and

increased travel speeds (Common Range: 100 – 500 PPS).

The Arc-Sharpening effects of high speed pulsing are expanded to new

dimensions. The ability to pulse at 5,000 PPS further enhances arc

stability and concentration potential — which is extremely beneficial to

automation where maximum travel speeds are required.

Time (1 AC Cycle) Time (1 AC Cycle)

Time (1 AC Cycle)

Pulse Cycle

Peak Time %

Peak

Amps

Background

Amps

(% of Peak)

Pulse Cycle

Peak Time %

AC Waveshape Controls (Continued)

Pulse TIG Controls

Dynasty®Power Sources

TIGRunner®Packages

Complete Packages

6

Packages and Torch Kits

Dynasty®350 #907 204 (CSA)

(Auto-Line™208–575 VAC)

Dynasty®350 #907 204-02-1 (CE)

(Auto-Line™380–575 VAC)

8 ft (2.4 m) primary cord, (2) international

(Dinse 50) connectors, and CD-ROM Setup

and Simulator.

Note: TIG torch adapter must be ordered separately.

Dynasty®700 #907 101 (CSA)

(Auto-Line™208–575 VAC)

Dynasty®700 #907 101-02-1 (CE)

(Auto-Line™380–575 VAC)

(2) thread lock weld cable connectors

(#225 029), (1) water-cooled thread lock

torch adapter (#225 028) for #18 or #20

torches, and CD-ROM Setup and Simulator.

Note: Primary cord and TIG torch must be ordered

separately.

Dynasty 350 TIGRunner®

#907 204-01-1 (CSA)

Completely assembled.

Package includes:

Dynasty®350 (#907 204)

RFCS-14 HD foot control

Coolmate™3.5 Coolant System

Cart with the following features:

single cylinder rack, foot pedal holder,

(3) cable/torch holders, (2) TIG electrode

filler holders and a convenient drawer

for tungsten and consumable storage

Note: Torch package and coolant must be ordered

separately.

Dynasty 700 TIGRunner®

#907 101-01-1 (CSA)

Completely assembled.

Package includes:

Dynasty®700 (#907 101)

RFCS-14 HD foot control

Coolmate™3.5 Coolant System

Cart with the following features:

single cylinder rack, foot pedal holder,

(3) cable/torch holders, (2) TIG electrode

filler holders and a convenient drawer

for tungsten and consumable storage

Note: Torch package and coolant must be ordered

separately.

Dynasty 350 Complete

#951 074 (CSA)

Completely assembled.

Package includes:

Dynasty®TIGRunner®(#907 204-01-1)

25 ft (7.6 m) Weldcraft CS310

water-cooled torch

Torch cable cover

CS310AKC torch accessory kit includes

shielding cups, collets, collet bodies,

and 2% cerium tungsten electrodes

(1/16, 3/32, and 1/8 in)

Smith regulator/flowmeter HM2051A-580

12 ft (3.7 m) rubber gas hose (regulator

to machine)

Water-cooled Dinse torch adapter

15 ft (4.6 m) 1/0 weld lead with clamp

(work or ground lead) and Dinse

connector

4 gallons of pre-mixed low-conductivity

coolant (#043 810)

Dynasty 700 Complete

#951 075 (CSA)

Completely assembled.

Package includes:

Dynasty®700 TIGRunner (#907 101-01-1)

25 ft (7.6 m) Weldcraft WP18SC

water-cooled torch

Torch cable cover

AK18C Torch Accessory Kit includes

shielding cups, collets, collet bodies and

2% cerium tungsten electrodes (3/32,

1/8 and 5/32 in)

Smith regulator/flowmeter H1954D-580

12 ft (3.7 m) rubber gas hose (regulator

to machine)

Water-cooled thread lock torch adapter

12 ft (3.7 m) 4/0 weld lead with clamp

(work or ground lead)

4 gallons of pre-mixed low-conductivity

coolant (#043 810)

Runner Cart

#300 244

Designed to accom -

modate the Dynasty®

or Maxstar®350 or

700 power sources

and the Coolmate™

3.5 Cooler. Cart

features: single

cylinder rack,

foot pedal holder,

(3) cable/torch

holders, (2) TIG electrode filler holders

and a convenient drawer for tungsten and

consumable storage.

Coolmate™3.5

#300 245

Designed to integrate

with the Dynasty®

and Maxstar®350

and 700 power

sources. For use with water-cooled torches

rated up to 600 amps. 3.5 gallon capacity.

TIG Coolant #043 810

Sold in multiples of 4. Pre-mixed low-

conductivity Miller coolant contains ethylene

glycol and deionized water to protect from

freezing and boiling -37˚ to 227˚F (-38˚ to

108˚C). 1-gallon plastic recyclable bottles.

Water-Cooled

Dinse #195 377

For Dynasty and

Maxstar® 350.

Used to adapt WP20, WP18, and CS310 to

dinse-style connector.

Order from Miller Parts.

Water-Cooled Thread Lock

#225 028

For Dynasty and Maxstar 700.

Used with (WP125, WP24W,

WP25, WP20, WP18, WP12,

CS310, CS410, WP22, WP27)

water-cooled torch.

Order from Miller Parts.

TIG Welding Gloves

#227 813 Small #227 815 Large

#227 814 Medium #227 816 X-Large

Made from soft grain goatskin. Sewn with

Kevlar®thread.

Order from Miller Parts.

Automation Interface Kit #300 549

Field Includes automation PC board, 28-pin

socket receptacle with harness, 28-pin plug

connector. Provides required and advanced

automation controls.

Weld Current Sensor #195 516

Detects when work clamp is not connected

and prevents expensive damage to

disconnect devices and input power cord

and wiring.

Educational Materials

To order these items, distributors can call

the Miller Literature Distribution Center at

1-920-735-4356, or FAX 1-920-735-4011.

Gas Tungsten Arc (TIG) Welding Book

#170 555

CD-ROM #233 558

Simulator and setup video (included with

machine).

Tungsten

Tungsten is 7 in length and available in pkgs of 10.

Order from Miller Parts.

2% Ceriated (orange) for AC/DC applications

#WC040X7 .040 in, 10– 80 A

#WC116X7 1/16 in, 70– 150 A

#WC332X7 3/32 in, 140– 250 A

#WC018X7 1/8 in, 225– 400 A

#WC532X7 5/32 in, 300– 500 A

1.5% Lanthanum (gold) for AC/DC applications

#WL040X7 .040 in, 10– 80 A

#WL116X7 1/16 in, 70– 150 A

#WL332X7 3/32 in, 140– 250 A

#WL018X7 1/8 in, 225– 400 A

#WL532X7 5/32 in, 300– 500 A

Remote Controls and Switches

RCCS-14 Remote

Contactor and Current

Control #043 688

14-pin plug. North/south rotary-motion

fingertip control fastens to TIG torch using

two Velcro®straps. Includes 26.5 ft (8 m)

control cord.

RFCS-14 HD Foot

Control #194 744

Maximum flexibility is

accomplished with a

reconfigurable cord that

can exit the front, back or either side of the

pedal. Foot pedal provides remote current

and contactor control. Includes 20 ft (6 m)

cord and 14-pin plug.

RHC-14 Hand Control #129 340

Miniature hand control for remote current

and contactor control. Dimensions: 4 x 4 x

3-1/4 in (102 x 102 x 83 mm). Includes

20 ft (6 m) cord and 14-pin plug.

RMLS-14 Switch

#129 337

Momentary-

and maintained-contact rocker switch for

contactor control. Push forward for

maintained contact and backward for

momentary contact. Includes 26.5 ft (8 m)

cord and 14-pin plug.

RMS-14

On/Off Control

#187 208

Momentary-contact switch for contactor

control. Rubber-covered pushbutton dome

switch ideal for repetitive on-off

applications. Includes 26.5 ft (8 m) cord

and 14-pin plug.

Extension Cords for 14-Pin Remote Controls

#122 973 25 ft (7.6 m)

#122 974 50 ft (15.2 m)

#122 975 75 ft (23 m)

Genuine Miller Accessories

Torch Kits

250 A Water-Cooled Torch Kit #300 185

25 ft (7.6 m) Weldcraft®WP20 torch

Torch cable cover

AK4C torch accessory kit includes

shielding cups, collets, collet bodies

and 2% cerium tungsten electrodes

(1/16, 3/32 and 1/8 in)

Smith®regulator/flowmeter HM2051A-580

12 ft (3.7 m) rubber gas hose (regulator

to machine)

Water-cooled Dinse torch adapter

15 ft (4.6 m) 1/0 weld lead with clamp

(work or ground lead) and Dinse connector

300 A Water-Cooled Torch Kit #300 183

Recommended for Dynasty 350

25 ft (7.6 m) Weldcraft®CS310 torch

Torch cable cover

CS310AKC torch accessory kit includes

shielding cups, collets, collet bodies

and 2% cerium tungsten electrodes

(1/16, 3/32 and 1/8 in)

Smith®regulator/flowmeter HM2051A-580

12 ft (3.7 m) rubber gas hose (regulator

to machine)

Water-cooled Dinse torch adapter

15 ft (4.6 m) 1/0 weld lead with clamp

(work or ground lead) and Dinse connector

400 A Water-Cooled Torch Kit #300 186

Recommended for Dynasty 700

25 ft (7.6 m) Weldcraft®WP18SC torch

Torch cable cover

AK18C torch accessory kit includes

shielding cups, collets, collet bodies

and 2% cerium tungsten electrodes

(3/32, 1/8 and 5/32 in)

Smith®regulator/flowmeter H1954D-580

12 ft (3.7 m) rubber gas hose (regulator

to machine)

Water-cooled thread lock torch adapters

12 ft (3.7 m) 4/0 weld lead with clamp

(work or ground lead)

7

Litho in USA

Distributed by:

Equipment and Options Stock No. Description Qty. Price

Dynasty®350 #907 204 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord

Dynasty®350 TIGRunner®#907 204-01-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord.

Requires coolant

Dynasty®350 Complete #951 074 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord.

Dynasty®350 International #907 204-02-1 Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE. 8 ft primary cord

Dynasty®700 #907 101 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA.

Dynasty®700 TIGRunner®#907 101-01-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA.

Requires coolant

Dynasty®700 Complete #951 075 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA.

Dynasty®700 International #907 101-02-1 Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE.

TIG Torch Kits

Weldcraft®250 A Water-Cooled Torch Kit #300 185 See page 7

Weldcraft®300 A Water-Cooled Torch Kit #300 183 See page 7. Recommended for Dynasty 350

Weldcraft®400 A Water-Cooled Torch Kit #300 186 See page 7. Recommended for Dynasty 700

Consumables and Tungsten Distributor: See Miller Parts Catalog

Gas Cylinder, Hose and Fittings

Remote Controls

RCCS-14 #043 688 North/south fingertip control

RFCS-14 HD #194 744 Heavy-duty foot control

RHC-14 #129 340 Hand control

RMLS-14 #129 337 Momentary/maintained rocker switch

RMS-14 #187 208 Momentary rubber dome switch

Extension Cords #122 973 25 ft (7.6 m)

#122 974 50 ft (15.2 m)

#122 975 75 ft (22.9 m)

Accessories

Runner™Cart #300 244 See page 7

Coolmate™3.5 #300 245

Requires coolant

TIG Coolant #043 810 Sold in multiples of 4. 1-gallon plastic bottles.

Automation Interface Kit #300 549 Field. Provides required automation connections

Weld Current Sensor #195 516 Field. Installation required.

Gas Tungsten Arc (TIG) Welding Book #170 555

Order at MillerWelds.com/resources/tools

CD-ROM #233 558 Setup and simulator video (included with machine)

Torch Adapters

Supplied with power source and torch kits

Water-Cooled Dinse #195 377 For Dynasty/Maxstar 350

Used to connect water-cooled torch to Dinse terminal machine.

For WP20, WP18 and CS310 (adapter included in Complete Package)

Order from Miller Parts

Water-Cooled Thread Lock #225 028 Used to connect water-cooled torch to Dynasty/Maxstar 700.

Order from Miller Parts

Cable Connectors

Supplied with power source and torch kits

Dinse Connector 50 mm (1 male) #042 418 Used to connect weld lead to Dinse terminal machine

Thread Lock Connectors (2 male) #225 029 Used to connect weld lead to Dynasty 700 or Maxstar 700.

Order from Miller Parts

Dinse Connector 50 mm (1 male, 1 female) #042 419 Used to extend weld cables

Tweco Terminal Adapter #042 465 Male Dinse to female Tweco

Cam-Lok Terminal Adapter #042 466 Male Dinse to female Cam-Lok

Miscellaneous

Stick Electrodes

Welding and Work Cables

Welding Gloves and Helmet

Date: Total Quoted Price:

Ordering Information