Miller Electric Aead 200 Le Users Manual CD1

2015-02-02

• TABLE OF CONTENTS
• 1 - SAFETY PRECAUTIONS FOR SERVICING
  • 1-1. Symbol Usage
  • 1-2. Servicing Hazards
• 2 - INSTALLATION
  • 2-1. Installing Welding Generator
  • 2-2. Dimensions, Weights, And Operating Angles
  • 2-3. Fuel Consumption
  • 2-4. Engine Prestart Checks
  • 2-5. Connecting The Battery
  • 2-6. Connecting To Weld Output Terminals
  • 2-7. Selecting Weld Cable Sizes
  • 2-8. Remote 14 Receptacle RC1 Information
• 3 - OPERATING WELDING GENERATOR
  • 3-1. Front Panel Controls
  • 3-2. Remote Control (Optional)
  • 3-3. Duty Cycle
  • 3-4. Volt-Ampere Curves
• 4 - OPERATING AUXILIARY EQUIPMENT
  • 4-1. 100 Hz Auxiliary Power Receptacle And Circuit Breaker
  • 4-2. AC Auxiliary Power Curve
  • 4-3. 60 Hz Auxiliary Power Receptacles And Circuit Breakers
• 5 - THEORY OF OPERATION
• 6 - TROUBLESHOOTING
  • 6-1. Troubleshooting Tables
  • 6-2. Troubleshooting Circuit Diagram For Welding Generator
  • 6-3. Troubleshooting Circuit Diagram For Welding Generator With Optional Remote Control
  • 6-4. Waveforms For Sections 6-2 And 6-3
  • 6-5. Idle Control Board/Module PC1 Testing Information
  • 6-6. Troubleshooting Flowcharts For Idle Control Board/Module PC1
  • 6-7. Voltage Regulator Board PC2 Testing Information Prior To Serial No. KE604176
  • 6-8. Voltage Regulator Board PC2 Test Point Values Prior To Serial No. KE604176
  • 6-9. Voltage Regulator Board PC2 Testing Information Effective With Serial No. KE604176
  • 6-10. Voltage Regulator Board PC2 Test Point Values Effective With Serial No. KE604176
  • 6-11. Optional Remote Control Board PC3 Testing Information
  • 6-12. Optional Remote Control Board PC3 Test Point Values
  • 6-13. Optional Remote Capacitor Board PC5 Testing Information Effective With Serial No. KD346698
  • 6-14. Optional Remote Capacitor Board PC5 Test Point Values Effective With Serial No. KD346698
  • 6-15. Replacing Brushes And Cleaning Slip Rings
  • 6-16. Checking Unit Output After Servicing
• 7 - DISASSEMBLY AND REASSEMBLY
  • 7-1. Disassembly Of Unit
  • 7-2. Disassembly Of Generator
• 8 - MAINTENANCE
  • 8-1. Routine Maintenance
  • 8-2. Maintenance Label
  • 8-3. Servicing Air Cleaner
  • 8-4. Changing Engine Oil, Oil Filter, And Fuel Filter
  • 8-5. Adjusting Engine Speed
  • 8-6. Overload Protection
  • 8-7. Inspecting And Cleaning Optional Spark Arrestor
• 9 - ELECTRICAL DIAGRAMS
• 10 - PARTS LIST