Mipro Electronics Co ACT8H Transmitter User Manual ACT8H ACT8T 2CE263

Download:
Mirror Download [FCC.gov]
Document ID	754172
Application ID	CjIMC8Qrl7OMEVS49+TXNA==
Document Description	Manual part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.36kB (691964 bits)
Date Submitted	2007-02-02 00:00:00
Date Available	2007-02-02 00:00:00
Creation Date	2007-02-01 10:19:29
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2007-02-01 10:20:02
Document Title	ACT8H-ACT8T(2CE263).cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	onegreen

Disposal
Dispose the unusable device according to valid regulations.
Digital Wireless Microphone Systems
Disposal of spent batteries/accumulators
You are required by law to return all spent batteries. Disposing of used
batteries with domestic waste is prohibited!
2005-08-13
Batteries / NiCad cells containing toxins are marked by
accompanying symbols that refer to the prohibition of
disposal with domestic waste. The designations for the
decisive heavy metals are: Cd=cadmium, Hg=mercury,
Pb=lead. You may return spent batteries/accumulators free
of charge to the recycling centres, our outlets or anywhere
else where batteries/accumulators are sold.
Instruction Manual
ACT-8H : DIGITAL WIRELESS HANDHELD MICROPHONE
By doing so, you fulfil the legal requirements and contribute to the
conservation of our environment!
ACT- 8T : DIGITAL WIRELESS BODY PACK TRANSMITTER
Electronics Co., Ltd.
Head office: 814, Pei-Kang Road, Chiayi, 60096, Taiwan.
Taipei office: 5, Lane 118, Sung-teh Road, 10075, Taipei, Taiwan.
Web-http: //www.mipro.com.tw
E-mail: mipro@mipro.com.tw
2 CE2 6 3
DIGITAL WIRELESS HANDHELD MICROPHONE
DIGITAL WIRELESS HANDHELD MICROPHONE
1. Part Names and Functions
ACT-8H DIGITAL WIRELESS HANDHELD MICROPHONE
Main features:
OFF
SET
MODE
1.
2.
3.
4.
5.
6.
7.
8.
9.
The world's first 24-bit true digital handheld wireless microphone, combining
the best design and the most advanced features.
Magnesium alloy housing offers a comfortable feel, balanced weight
allocation and special surface finishing, giving it a truly professional
appearance and quality.
Available in three colors: black, rose metallic and blue diamond. Custommade colors are also available for special requirements.
Anti-roll & anti-pop microphone capsule module with extremely low touch
noise characteristics.
Optional interchangeable microphone capsule modules.
Bright LCD display shows working channel, battery status, input level and
error codes.
Integrated antenna provides maximum transmission efficiency and the
patented color rear caps protect the on/off as well as the audio sensitivity
switches while providing easy channel identification.
Built-in and detachable lithium-polymer (Li-Poly) battery pack can be
recharged alone or together with the transmitter. Eight continuous hours of
operation are possible due to its compact size and high-efficiency circuitry
design.
Second generation of the world's first ACT function rapidly and precisely sets
up the transmitter frequency.
6 7 8
10
1.
2.
3.
4.
11
Upper Grille: Provides access & protection to capsule.
Capsule Module: Metal grille integrated to protect the capsule.
Housing: Houses various PCB and Li-Poly battery module.
LCD Display Panel: Displays group, frequency, gain, battery level, input SPL and
error code.
5.
Lithium-Polymer Battery Back: Built-in and detachable Li-Poly battery module can
be recharged alone or together with transmitter; gives 8 hours continuous
operation time.
6.
Power Switch: Switch to ''ON'' when using microphone and ''OFF'' position when
not.
7.
MODE: Mode selection button.
8.
SET: Parameter selection button.
9.
Color Rear Cap: Designed to protect the ON/OFF switch to help prevent the user
turning off the microphone during use.
10. ACT Receptor: Signal reception via the ACT function; automatically programs the
frequency and the encryption code from the receiver.
11. Battery Charging Contact: For charging battery module.
DIGITAL WIRELESS HANDHELD MICROPHONE
DIGITAL WIRELESS HANDHELD MICROPHONE
2. Battery Removals and Installation
3. Rear Cap On/Off Switch Protection
The patented color rear cap serves two purposes, provides easy channel
identification and protecting the toggle on/off switch. It allows the on/off switch
to either be exposed or concealed as desired. You can avoid unintended
switching off of the microphone by rotating the color rear cap 180 degrees to
cover the on/off switch completely.
180
**Note: When using the microphone, the color rear cap must be in place.
Open the upper grille and capsule module, then turning the battery pack
in a counterclockwise direction in order to replace the battery (see diagram 2).
To reinstall the battery module after loading the new battery, turn it in a
clockwise direction (see diagram 2).
OPEN
4. LCD Panel Functions
Fully Lit VFD Display
LOCK
RF
AF
B BT
Function Selection:
Mode Switch: To select from different menu
The LCD panel has 6 functions displayed sequentially; their respective
descriptions and operations are as follows:
**NOTE: When microphone is not in use, please turn the power off.
Battery pack can be recharged while in the transmitter or remove
from transmitter and charged alone.
GR--CH
FREQ
AF--SEN
LOW--CU
LIMIT
ENCRYP
A. Operation Guide
a.
Press MODE (7) to access the 6 different functions. Once a function is selected, it
starts flashing on the screen. If parameter needs to be modified on selected
function, press SET (8) to modify the value while the display is still flashing. Once
done, leave it for 5 seconds until it stops flashing and the selection will be
programmed into the transmitter.
DIGITAL WIRELESS HANDHELD MICROPHONE
DIGITAL WIRELESS HANDHELD MICROPHONE
A. Operate via MODE Button
(1)GR-CH: Displays Information of Group and Channel
MODE
FREQ
RF
RF
B. Operation Guide:
BT
AF
a.
BT
AF
Press ''MODE'' and stop on "FREQ" function, the display showing current
frequency will be flashing. After 5 seconds, the display will stop flashing.
"FREQ" function is added to display frequency information. Changing current
frequency must be done on the receiver.
B.
A. Operate via MODE Button
MODE
**NOTE: To modify transmitter's group, channel and frequency, all
three must be set at the receiver and transmit the new setting to
transmitter via ACT.
GR--CH
B. Operation Guide:
a.
b.
Press ''MODE'' and stop on "GR-CH" function, the display showing current group
and channel will be flashing. After 5 seconds, the display will stop flashing.
"GR-CH" function is added to display group and channel information. Changing
current group and channel must be done on the receiver.
(3) LOW-CU: Setup and Change of Low Frequency Cut Off
SET
OFF
SET
**NOTE: When program a special frequency via monitoring software;
LCD screen cannot display the number. This is because this special
channel is not in the preset group and channel. Therefore, LCD panel
will look like illustration below.
RF
RF
BT
AF
ON
RF
BT
AF
AF
BT
RF
RF
BT
AF
AF
A. Operate via MODE Button
OFF
BT
MODE
LOW--CU
ON
SET
(2) FREQ: Displays Information of Transmitter Frequency
B. Operation Guide:
a.
RF
RF
b.
BT
AF
AF
Press ''MODE'' and stop on "LOW-CU" function, the display showing current state
will be flashing and is ready to be modified.
Press ''SET'' button to change to ''ON'' or ''OFF'' as desired.
**NOTE: When the LOW-CU function is ''ON'', the frequency response
below 100Hz will decrease about 4dB with a slope of -6dB/Octave.
BT
"MHz"
65

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2007:02:01 10:20:02+08:00
Create Date                     : 2007:02:01 10:19:29+08:00
Metadata Date                   : 2007:02:01 10:20:02+08:00
Creator Tool                    : CorelDRAW Version 9.397
Format                          : application/pdf
Title                           : ACT8H-ACT8T(2CE263).cdr
Creator                         : onegreen
Document ID                     : uuid:0bc47a1f-8e67-415e-b8ad-5b7a77f9e964
Instance ID                     : uuid:fdb7c14a-15d8-41d2-ad62-46aa7e4391ce
Producer                        : Corel PDF Engine Version 9.397
Has XFA                         : No
Page Count                      : 4
Author                          : onegreen

EXIF Metadata provided by EXIF.tools