Mitac Digital Technology N564 Tablet User Manual

Mitac International Corporation Tablet

User Manual

User ManualN564
1Table of contentsYour device at a glance................................................................. 2Charging the battery ..................................................................... 3Turning the device ON and OFF ................................................... 4Sleep mode ............................................................................ 5Airplane mode ........................................................................ 5Installing a memory card ............................................................... 5Connecting to a computer ............................................................. 6Mounting the device ...................................................................... 6Using the cradle ..................................................................... 6Using the mount ..................................................................... 7Navigating on the screen .............................................................. 8Home screen ................................................................................ 8Customizing your device ............................................................... 9Wireless network connection .................................................. 9Bluetooth connection ............................................................ 10Caring for your device ................................................................. 10Troubleshooting .................................................................... 10Caring for your device ...........................................................11Regulatory information ................................................................ 12FCC ...................................................................................... 12IC .......................................................................................... 14CE ........................................................................................ 14WEEE ................................................................................... 15Safety precautions ................................................................ 15
2Your device at a glanceNote: Depending on the specic model purchased, the color and look of your device and accessories may not exactly match the graphics shown in this document.❶NFC sensor*❷Front camera lens*❸Light sensor*❹Power button❺Volume buttons❻Touch screen❼Microphone❽Memory card slot❾Rear camera lens*❿Flash*⓫Screw for cradle⓬Socket for cradle⓭Dock connector⓮Speaker⓯Micro-USB connector*For selected models only
3Charging the batteryNote: Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.When charging the battery for the very rst time, you should charge it for at least 8 hours (using the AC charger) with your device turned off.1. Push the tap outwards, plug the converter to the AC charger and then push the tap inwards to lock the converter in place (❶).2. Open the connector cover on your device and connect the charger cable to the Micro-USB connector (❷).3. Plug the AC charger into a wall outlet (❸).
4CAUTION: For optimal performance of the lithium battery: yDo not charge the battery where the temperature is high (e.g. in direct sunlight). yRecharge the battery when it is nearly discharged. When recharging, make sure that the battery is fully charged. Doing so can extend the battery life. yIf you will not use the product for a long period of time (over one month) or nd the discharge/recharge time has been shortened, be sure to fully discharge the battery rst before recharging it. You are also advised to fully discharge and recharge the battery once every 1~2 months. yFailure to follow the battery usage instructions could cause damage to your device, battery and even bodily injury or property damage and will void the warranty.Turning the device ON and OFF1. Press and hold the Power button for about 2 seconds to turn on your device. Wait for the boot screen to display.2. The Home screen will display and the device is in Lock mode by default. Drag the Lock icon ( ) upwards. The device is ready for use.3. To turn off the devide, press and hold the Power button until the option window displays. Then tap Power off.Note: You can also choose to restart the device by selecting Restart from the option window.
5Sleep modeYour device will automatically switch off the screen after 1 minute (by default) of inactivity. You can manually switch off the screen by pressing the Power button briey.To resume the screen, press the Power button briey and then unlock the device by dragging the Lock icon ( ) upwards.To change the settings, tap on the desktop  Settings  Display  Sleep.Airplane modeWhen you are in an airplane or in the area where data transferring is not allowed, enable Airplane mode. You will be able to use many of your device’s applications (such as playing games or listening music), but all wireless radios, including wireless networks and Bluetooth, on the device are turned off – it cannot send or receive data.To enable Airplane mode: press and hold the Power button until the option window displays. Then tap Airplane mode. The icon in the status bar indicates that Airplane mode is on.To disable Airplane mode: tap on the desktop  Settings  More in Wirelss & networks, and tap the Airplane mode switch to turn it off.Installing a memory cardCAUTION: Do not apply pressure to the center of the memory card.Slide the cover latch to open the cover on the left side of the device to locate the memory card slot. Noting the card orientation, hold the card (MicroSD) by the edges and gently insert it into the slot.To remove a card, rst unmount it from the device by tapping on the desktop  Settings  Storage & USB. Locate the desired storage item and tap . Wait
6until the card is safety unmounted. Then gently push the top edge of the card inwards to release it, and pull it out of the slot.Note: Inserting the card in the reverse direction may cause damage.Note: The manufacturer does not guarantee the product’s compatibilities with the storage cards from all manufacturers.Note: If you encounter access problems with your memory card, please visit the website http://www.sdcard.org/consumers/formatter_3/ and use the "SD Formatter 3.0 for SD/SDHC/SDXC" tool to format your memory card.Connecting to a computerConnect the Micro-USB end of the USB cable to your device and the other end to a USB port in your computer.Note: When connected to the computer, your device will not be charged. When data synchronization is in progress, your device will consume instead of charging battery power.Mounting the deviceDepending on your model, a cradle and/or a mount may be provided for your device. Follow the illustrations to mount your device.Using the cradleFollow the illustrations to install the cradle:
7The cradle allows you to: yCharge the device via the AC charger or the car charger. yConnect the device to a computer via the USB cable. yConnect an external USB storage (such as a USB ash drive). yConnect to headphones.Follow the illustrations to release the cradle:Using the mountFollow the illustration to install the mount onto the cradle:
8Navigating on the screenTo operate your device, touch the screen with your nger.You can perform the following actions: yTap: Touch the screen once with your nger to open items or select onscreen buttons or options. yTap and hold: Tap and hold on the desired item to open the pop-up menu that contains the available options for the item (for example, the Copy/Move/Rename options for a le in File Manager). yDrag: Tap and hold on the item and then move it to the target position without releasing your nger. ySlide: Drag your nger vertically or horizontally across the screen. yDrag to the left/right to switch to the next/previous item on the list. yDrag to the top/bottom to scroll up/down the screen.Note: Not all slide gestures are applicable to all applications. yMulti-touch gestures: Move your ngers apart or together on the screen to zoom in or out while viewing a picture or a web page.Note: Not all multi-touch gestures are applicable to all applications. yRotating the screen: For most applications, you can automatically change the screen orientation, from portrait to landscape and vise versa, by turning the device sideways.Note: Rotating the screen is not applicable to all applications.Home screenThe Home screen is your starting place for tasks, providing quick access to frequently used applications and settings.To display the Home screen, tap at any time.
9Status BarQuick LauncherShortcuts/widgetsDesktop All Apps buttonSoft keys Back Home Recent AppsThe soft keys may be in hidden mode at times. Simply tap where the keys are located to bring out the keys again.Customizing your deviceYou can customise the device through the Settings menu, including personalizing the Home screen, changing the display and sound settings, conguring the connection settings, and more.To access the Settings menu, tap on the desktop  Settings.Wireless network connection1. Tap on the desktop  Settings  WLAN.2. Tap the WLAN switch to turn it on. The device will automatically scan for available wireless networks.3. Tap a wireless network to connect.4. If you select an open network, you will be automatically connected to the network.
10If you select a network that is secured with WEP, enter the key and then tap CONNECT.5. When your device is connected to a wireless network, the WIFI icon ( ) will appear in the status bar indicating the signal strength (number of bands that light up).Bluetooth connectionTo pair a Bluetooth device for sharing data:1. Tap on the desktop  Settings  Bluetooth.2. Tap the Bluetooth switch to turn it on. The device will automatically scan for available Bluetooth devices. Note: By default, your device is not in visible mode when Bluetooth is turned on. If you need to enter visible mode: tap Bluetooth and then tap your device name. The default visibility timeout is 2 minutes.3. Tap a device from the list to initiate pairing.4. On your device, the passkey is displayed. Make sure the same passkey is displayed on the other device and then tap PAIR. Then tap PAIR on your device to conrm pairing if necessary.Caring for your deviceTroubleshootingNote: If you encounter a problem you cannot solve, contact an authorised service centre for assistance.Power does not switch on when using battery power.The remaining battery power may be too low to run your device. Charge the battery.Screen responds slowly.Make sure that your device is not running out of battery power. If the problem still persists, restart your device.
11Screen freezes.Restart your device.Screen is hard to read.Make sure that the backlight of the display is set to a high-enough brightness.Cannot establish a connection with a computer. yMake sure that your device and your computer are both switched on before trying to establish a connection. yMake sure that the cable is securely plugged into the USB port on your computer and on your device. Connect the USB cable directly to your computer—do not run the cable through a USB hub. yRestart your device before connecting the cable. Always disconnect your device before you restart your computer.Caring for your deviceTaking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device. yKeep your device away from excessive moisture and extreme temperatures. yAvoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. yDo not place anything on top of your device or drop objects on your device. yDo not drop your device or subject it to severe shock. yDo not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use. yThe screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches.
12 yNever clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. yDo not use paper towels to clean the screen. yNever attempt to disassemble, repair or make any modications to your device. Disassembly, modication or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty. yDo not store or carry ammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. yTo discourage theft, do not leave the device and accessories in plain view in an unattended vehicle. yDo not expose the device to extreme heat or direct sunlight for prolonged periods. Overheating may damage the device.Regulatory information yFor regulatory identication purposes, the product series is assigned a model number of N564. yRadio frequency: yWLAN: 802.11 b/g/n (2.4 GHz) yGPS + GLONASS: 1574 – 1610 MHz yNFC: 13.56 MHzFCCFederal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
13This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and receiver. yConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. yConsult the dealer or an experienced radio/TV technician for help.FCC Caution: yAny changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. yThis transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The exposure standard for wireless device employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands.Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must xed to US operation channels only.
14IC yThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: yThis device may not cause interference. yThis device must accept any interference, including interference that may cause undesired operation of the device. yThis Class B digital apparatus complies with Canadian ICES-003. yThis device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. yThe County Code Selection feature is disabled for products marketed in the US/ Canada. yLe présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: yL'appareil ne doit pas produire de brouillage. yL'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. yCet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. yCet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. yLa fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.CEFrequency Band PowerWLAN 2.4 GHz 20 dBmBluetooth 10 dBm
15Ensure all protective covers of your electronic device are covered before using the device. Electrostatic discharge or ingress of water could have an impact on the performance of your device, which may cause malfunctions and/or damages to the device.WEEEThis product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE - 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point.Safety precautionsTo prevent possible hearing damage, do not listen at high volume levels for long periods.About charging yUse only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. yThis product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 2.0 A. yUse a specied battery in the equipment.About the charger yDo not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet. yAllow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case. yConnect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging.
16 yDo not use the charger if the cord becomes damaged. yDo not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.About the battery yUse a specied battery in the equipment. yCAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of re or burns, do not disassemble, crush, puncture, or dispose of in re or water. yImportant instructions (for service personnel only) yCaution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. yReplace only with the same or equivalent type recommended by the manufacturer. yThe battery must be recycled or disposed of properly. yUse the battery only in the specied equipment.
17Revision: R00 (April, 2017)Trademark All brand and product names are trademarks or registered trademarks of their respective companies.Disclaimer Specications and documents are subject to change without notice.Note Not all models are available in all regions. Not all features are available on all models. Depending on the specic model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. The screenshots and other presentations shown in this document are for reference only.

Navigation menu