Mitel Deutschland 68982AA620D-01 1,9 GHz cordless phone, portable part with BT User Manual BA 610d 620d 630d GAP GB 1FA56B

Mitel Deutschland GmbH 1,9 GHz cordless phone, portable part with BT BA 610d 620d 630d GAP GB 1FA56B

620d UserMan

www.aastra.comCreated on: 16.10.2008 • Issue 1 • Products similar to illustrations • Right to make technical changes reserved.Aastra 610d, 620d, 630d Aastra 610d, 620d, 630d withGAP-compatible communication systemsUser's Guide
iGeneral information..................................................................................................................1Prescribed use / Declaration of Conformity …………………………………………………2Notes on safety …………………………………………………………………………2Note for wearers of hearing aids …………………………………………………………3Communications Regulation Information …………………………………………………3FCC Notices (U.S. Only) …………………………………………………………………3Health and Safety Information …………………………………………………………3Industry Canada (Canada only) …………………………………………………………4Installation ...............................................................................................................................5Inserting the standard battery ……………………………………………………………5Inserting the power battery ………………………………………………………………5Installing/removing a mounting bracket or rotary clip ………………………………………6Attaching the carrying strap ………………………………………………………………6Headset connection/Bluetooth® …………………………………………………………7Aastra 630d - Headset: To remove the sealing cover………………………………………7USB and external charging connection ……………………………………………………8Aastra 630d - USB connector: To remove the sealing cover ………………………………8Connecting the charging unit  ……………………………………………………………8Power supply / Power supply unit …………………………………………………………9Micro SD card ……………………………………………………………………………9Important information about the battery …………………………………………………9Precautions during use ………………………………………………………………10Commissioning .......................................................................................................................11Charging and durations …………………………………………………………………11Battery: Charging states …………………………………………………………………12Battery warning ………………………………………………………………………12Registering your handset (log-in)…………………………………………………………12Registration …………………………………………………………………………13Subscription …………………………………………………………………………13Function overview...................................................................................................................14Displays, softkeys, LEDs and key functions   ………………………………………………14Key assignment (on delivery) …………………………………………………………14Display arrangement …………………………………………………………………15Display ………………………………………………………………………………15Softkey line and idle display……………………………………………………………16LED   …………………………………………………………………………………17Key functions …………………………………………………………………………18Navigating in menus ...............................................................................................................21Example: Setting the language …………………………………………………………21Example: Personal phone book/Editor ……………………………………………………21Editor …………………………………………………………………………………23ContentsThank you for choosing an Aastra product. Our product stands forhighest quality standards combined with high-quality design.The following User's Guide will assist you in using your Aastra DECT telephone and provide answersto all your most important questions. If you should require further technical support or informationabout other Aastra products, please contact the person responsible for your system or get in touchwith your local dealer.You can also find further information about these devices and other products onour website.We hope you enjoy using your Aastra DECT telephoneAbout this User's GuideYour handset can be used as a system or GAP telephone. The telephone system must support thedevice as a system telephone.The handset is described as a GAP-compatible telephone in this User's Guide.GAP (Generic Access Profile) and the DECT standard define methods according to which digital cord-less telephones can set up connections. As the GAP standard is not manufacturer-specific, it's possi-ble to combine base stations and handsets from different manufacturers with one another. Basicfunctions (making and receiving calls) as well as the local features of the device are always possiblewhen using these combinations. Other system features that may be supported by the telephonesystem (e.g. code entry) can be found in the corresponding user’s guide of the respective systemmanufacturer.Welcome
iiiiiContentsContentsProtection functions …………………………………………………………………39Profiles  ………………………………………………………………………………40"Info" menu     …………………………………………………………………………40"Active features" menu …………………………………………………………………41"Phone book" menu ……………………………………………………………………41"Time/Alarms" menu      …………………………………………………………………42"Audio" menu …………………………………………………………………………44"Call filter" menu    ………………………………………………………………………46"System" menu …………………………………………………………………………47"Settings" menu…………………………………………………………………………48"Security" menu …………………………………………………………………………51"Profiles" menu     ………………………………………………………………………53Key programming ...................................................................................................................55Programming (general) …………………………………………………………………55Special features for the VIP list  (on the hotkey on delivery)…………………………………56Appendix.................................................................................................................................57Care and Maintenance …………………………………………………………………57Environmental Characteristics and Disposal  ………………………………………………57Instructions for disposal ………………………………………………………………57Declaration of Conformity   ………………………………………………………………58Limited Waranty  ………………………………………………………………………59Exclusions ……………………………………………………………………………59Warranty Repair Services ………………………………………………………………59After Warranty Service…………………………………………………………………60Accessories ……………………………………………………………………………61Technical specifications   …………………………………………………………………63Menu Structure …………………………………………………………………………65Index……………………………………………………………………………………68Basic functions ........................................................................................................................24Switching the handset on/off ……………………………………………………………24Key lock / Phone lock ……………………………………………………………………24Switching hands-free operation on/off ……………………………………………………24Acknowledging an appointment/alarm …………………………………………………25Adjusting the volume of the earpiece during the call   ……………………………………25Switching the ringer on/off ………………………………………………………………25Switching ringer off at call ………………………………………………………………25Illumination ……………………………………………………………………………26Changing the brightness/contrast of the display …………………………………………26Muting the handset ……………………………………………………………………26Automatic hide / Info window ……………………………………………………………27Event window and "Info"- Menu …………………………………………………………27Vibration alarm (620d, 630d only) ………………………………………………………27Configuring your personal directory ………………………………………………………27Editing lists ……………………………………………………………………………28Using the Bluetooth® headset  (Aastra 620d, 630d)  ………………………………………29Registration …………………………………………………………………………29Telephoning via the Bluetooth headset…………………………………………………30Special key (Hotkey) /VIP list  (Aastra 620d, 630d)  …………………………………………30VIP list (Aastra 610d) ……………………………………………………………………30Special functions (Aastra 630d only)………………………………………………………31SOS …………………………………………………………………………………31"Mandown" …………………………………………………………………………31Telephoning............................................................................................................................33Answering a call…………………………………………………………………………33Making internal / external calls …………………………………………………………34Direct dial ……………………………………………………………………………34Predial ………………………………………………………………………………34Calling from the Redial list ………………………………………………………………34Calling from your personal Phone book …………………………………………………35Calling from the Caller lists ………………………………………………………………35Ending calls ……………………………………………………………………………36Multiple connections ……………………………………………………………………37Consultation call / Brokering …………………………………………………………37Devices menu..........................................................................................................................38Notes on the display symbols in the menu………………………………………………38Overview ………………………………………………………………………………38Info   …………………………………………………………………………………38Active features ………………………………………………………………………38Phone book    …………………………………………………………………………39Time/Alarms       ………………………………………………………………………39Audio ………………………………………………………………………………39Call filter ……………………………………………………………………………39System ………………………………………………………………………………39Settings ………………………………………………………………………………39
1ivGeneral informationGeneral informationAastra 610d- 3 softkeys (programmable) / 2 sidekeys - Caller list for 30 entries- Redial list for 20 entries- Local phone book for 100 entries- Connection socket for headset- Safety class IP 50Aastra 620d- 1 hotkey / 3 sidekeys / 3 softkeys (programmable)- Caller list for 50 entries- Redial list for 30 entries- Local phone book for 200 entries- Headset connection via cable or Bluetooth- Micro SD card for device-specific settings (optional) - Mini USB connection- Safety class IP 50Aastra 630d- 1 hotkey / 3 sidekeys / 3 softkeys (programmable)- 1 emergency call key- Caller list for 50 entries- Redial list for 30 entries- Local phone book for 200 entries- Sensor for "Mandown"- Headset connection via cable or Bluetooth- Micro SD card for device-specific settings (optional) - Mini USB connection- Safety class IP 65 (dust and water spray protected)M@for al ers Contents
32General informationNote for wearers of hearing aidsBefore using the handset, users of hearing aids should note that radio signals can affect hearing aidsand, if powerful enough, can cause an unpleasant buzzing sound.Communications Regulation InformationFCC Notices (U.S. Only)This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-tions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Modifications not expressly approved by this company could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.•  Consult the dealer or an experienced radio/TV technician for help.Health and Safety InformationExposure to Radio Frequency (RF) Signals:The wireless phone is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communi-cations Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelinesand establish permitted levels of RF energy for the general population. The guidelines are based onthe safety standards previously set by both U.S. and international standards bodies. These standardsinclude a substantial safety margin designed to assure the safety of all persons, regardless of ageand health.This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.General informationPrescribed use / Declaration of ConformityThis product can be used in all EU member states on a DECT-GAP-compatible communication sys-tem. The telephone complies with the radio-specific European harmonised standards for DECT. TheCE mark on the product confirms its conformance with the technical directives for user safety andelectromagnetic compatibility, the relevant declaration of conformity according to European Direc-tive 99/5/EC applies at the date of issue.The declaration of conformity can be viewed on the Aastra homepage on the Internet.This device is also approved for use in North America (USA and Canada). For more information onthis, read the safety information on page 3.Please also use the other documentation that was supplied with the parts of your telephone system.Notes on safetyIt is imperative to observe the following instructions when setting up, connecting and using thetelephone.•Place the charger cradle on a non-slip surface. •Lay the connection cable so it cannot cause accidents! •Important instructions for using the battery are given on  page 9. •Do not place the handset or the charger cradle•close to heat sources•in direct sunlight•next to other electrical devices •Protect your telephone from moisture, dust, aggressive liquids and gases. •Only use approved accessories. •Only use the plug-in power supply supplied (23-00-1061-00). •Always switch off the handset before removing the battery •Never•open the charger cradle or the handset (except for the battery compartment cover) yourself!•touch the plug contacts with pointed metallic objects!•carry the charger cradle by the connection cable! •Only clean your telephone with a slightly moist cloth. •Do not use your telephone in explosive areas. •Do not use the Aastra 610d and 620d in wet rooms (e.g. bathrooms).
54InstallationInstallationInserting the standard batteryAastra 610d, 620dPush the battery cover downwards until it disengagesfrom the locking mechanism and lift off. Insert the bat-tery with the contacts downwards. Replace the batterycover and push upwards until it snaps into place.Aastra 630dUndo the two screws on the back of the handset with asuitable tool and remove the cover. Insert the batterywith the contacts downwards, close the battery com-partment with the cover and screw back in place. Donot damage the rubber seal when assembling.Inserting the power batteryYou can order a battery with higher capacity (power battery) for the Aastra 620d and 630das an accessory (see  page 61). This battery has a thicker design so you need anotherbattery cover that protrudes approx. 6 mm beyond therear of the device.Install the new battery cover as described above. In the Aastra 620d you should remove any installedfixing bracket beforehand.This EUT has been shown to be capable of compliance for localized specific absorption rate (SAR) foruncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OETBulletin 65 Supplement C (2001) and IEEE 1528-2003.Industry Canada (Canada only)Operation of this device is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interference that may causeundesired operation of the device.Privacy of communications may not be ensured when using this telephone.Exposure to Radio Frequency (RF) Signals:The wireless phone is a radio transmitter and receiver. It is designed and manufactured not toexceed the emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health(Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permit-ted levels of RF energy for the general population. These guidelines are based on the safety stan-dards previously set by international standard bodies. These standards include a substantial safetymargin designed to assure the safety of all persons, regardless of age and health.This device and its antenna must not be co-located or operating in conjunction with any otherantenna or transmitter.This device has been shown to be capable of compliance for localized specific absorption rate (SAR)for uncontrolled environment / general public exposure limits specific in ANSI/IEEE C95.1-1992 andhad been tested in accordance with the measurement procedures specified in IEEE 1528-2003.General information
7InstallationHeadset connection/Bluetooth®All handsets have a 2.5 mm jack plug at the bottom left for connecting a headset. Only use therecommended headsets (see Accessories page 61).The Aastra 620d/630d mobile handsets have a Bluetoothinterface (2.0) for corresponding headsets.With a headset only audio data can be transferred via the Bluetoothinterface.Aastra 630d - Headset: To remove the sealing coverThe opening of the headset connection is closed with a captive cover. If the headset is not in use,please close the opening so the device can be used in accordance with its protection class.Remove the sealing cover from the device by pulling it out on the upper edge. Never pull it out onthe bottom edge.6InstallationInstalling/removing a mounting bracket or rotary clipAastra 610d, 620dPlace the supplied fixing bracket on both openings atthe upper end of the handset and snap in place bypressing downwards. To remove the fixing bracket,press into the small cutouts at the edge of the bracketand pull the two sides slightly apart.The Aastra 610d and 620d can also be fitted with a rotary clip as an accessory. Place the supplied fixingbracket on both openings at the upper end of thehandset and snap in place by pressing downwards. Theclip is then pushed onto the protruding button. Torelease the handset from the clip, press the top button.Attaching the carrying strapAastra 610d, 620d: There are two openingsin the upper part of the fixing bracket. Feed the lowerend of the carrying strap through these openings (ple-ase install with the fixing bracket removed). Carryingstraps are available as accessories (see page 61).Aastra 630: A carrying strap with carrying strap attachment is available as an accessory. Toattach the holder, replace the screwed-on beltclip by the carrying strap attachment.
9InstallationPower supply / Power supply unitThe power supply unit is designed for 100V to 240V AC (50-60 Hz). It is supplied with four changeadapters enabling virtually worldwide use. Where necessary, connect the plug normally used in yourcountry to the power supply unit. There are two versions of the plug-in power supply unit that areconnected slightly differently:Version 1: Set the switch on the power supply unit to OPEN and push out the existing plug upwards.Then insert the new plug required into the power supply unit and lock it with the switch (LOCK).Version 2: Remove any existing plug by pressing OPEN. Then insert the required new plug into thepower supply unit at a slight angle with the label TOP upwards. Press downwards until it snaps intoplace.Micro SD cardAastra 620d, 630d: There is a slot for a micro SD card under the battery in the handset. This is notused in the current delivery condition and is available for future applications.  Please make sure thatthe card slot is not damaged when inserting the battery.Important information about the batteryThe devices are powered by a Li-ion battery (both standard and power battery). It is vital that you read the safety regulations before using the battery for the first time. Keep thesesafety regulations and all instructions for use at hand for future reference.•Dispose of used batteries according to the instructions on page ???.Failure to heed any of the following precautions when using the battery can lead to overheating, fireand danger of explosion.•CAUTION: Risk of explosion if the battery is replaced by an incorrect type.•Never try to use the battery for the power supply of any device other than these handsets.•Never use or leave the battery close to a naked flame.•Never put the battery into a microwave oven, do not throw it into a fire and do not expose it tohigh temperatures by any other means.•  Never carry or store the battery together with electrically conducting objects (neck chains, pencilleads, etc.)•Never attempt to open the battery, never modify it in any way or subject it to severe blows.•Never immerse the battery in fresh or salt water.•Never use or leave the battery in direct sunlight, in a vehicle parked in blazing sunlight or in anyother location with high temperatures.8InstallationUSB and external charging connectionAastra 620d, 630d: A mini USB connection (2.0) is located at the bottom right. This has two func-tions:•as an interface for connecting to a PC to load data from or to the device, for example. If the hand-set is connected to a PC, the battery is charged at the same time. The charging process is, howe-ver, slower than if the handset is charged in the charging unit.•as a connection socket for a USB charging device (see Accessories, page 61) to charge the handseteven when it is in a leather pouch. The charging process is also slower here than charging in thecharger cradle.Only use a shielded USB cable (see Accessories, page 61)Aastra 630d - USB connector: To remove the sealing coverThe opening of the USB connection in the Aastra 630d is closed with a captive cover. If the USB cableis not in use, please close the opening so the device can be used in accordance with its protectionclass.Remove the sealing cover from the device by pulling it out on the upper edge. Never pull it out onthe bottom edge.Connecting the charging unitAastra 610d, 620d: This handset can be used without any changes to the charger cradle.Aastra 630d: To use this handset, you must removethe two lateral guides in the charger cradle. They areeasy to lift on the inside edge using a fingernail or apaper clip.The plastic guides can also be removed, by pushing a suitablescrewdriver into the slits on the bottom of the charger.Connect the plug-in power supply to the charger cradle and place the connection cable through thecable guide. Place the charger cradle on a non-slip surface. Change the plug of the power supplyunit if necessary (see below).
11CommissioningCommissioningCharge the battery before using your handset for the first time. Maximum battery performance is first reached after three to five charging and discharging cycles.Place the handset in the charger cradle regularly to achieve optimum battery charge.After initial charging of the battery your handset is ready for use, calls can be received or made fromthis handset.Charging and durationsCharging time in the charger cradle (empty battery): Full capacity: 2 hours (standard battery), 4 hours (power battery).Charging time with USB charging device:Full capacity: 4 hours (standard battery), 8 hours (power battery).Talk time: Standard battery - up to 15 hours (when fully charged) for North America. Standard battery - up to 12 hours (when fully charged) for other countries.Power battery - up to 30 hours (when fully charged) for North America. Power battery - up to 24 hours (when fully charged) for other countries.Standby time: Standard battery - up to 105 hours (when fully charged) for North America. Standard battery - up to 110 hours (when fully charged) for other countries.Power battery - up to 190 hours (when fully charged) for North America. Power battery - up to 200 hours (when fully charged) for other countries.NotePoor radio signals (far away from the system base station) reduce the handset standby and talktimes. High loudspeaker or ringer volume, frequent key activation and display illumination as well asactive vibration alarm and Bluetoothoperation are features that can specifically shorten standbyand talk times.10Installation•  If you ever notice liquid leaking out, unusual odour, build-up of heat, discolouration, deformationor any other abnormal condition when you use, charge or store the battery, remove the batteryimmediately from the handset and keep it away from naked flames.•  The battery fluid can damage your sight. If at any time battery fluid accidentally gets into youreyes, rinse your eyes immediately with clean tap water and contact a doctor.•  If the battery is to be used by children, make sure a responsible adult instructs the children in theprecautions and proper handling, and make sure the children handle the battery correctly.•  If battery fluid accidentally gets onto your clothing or skin, rinse the affected place immediatelywith pure tap water. Prolonged contact with battery fluid can lead to skin inflammation.Precautions during use•  The battery is designed for use with these handsets only.•  Only use the charger cradle supplied for charging.•  A new battery is not charged so you need to charge it before using for the first time.•  Using the battery in a cold environment can shorten the expected operating life of a full charge.Charge the battery at a location with a temperature between 10° C and 35° C. Charging outsidethis temperature range can lead to a longer-than-usual charging time or even to failure of thecharging process.•  An extremely short operating time after a full charge indicates that the lifetime of the battery hasexpired. Replace the battery.•  Never wipe the battery with thinners, benzene, alcohol, or other volatile substances, or chemicallytreated cloths. These can cause deformation of the battery and malfunction.
13CommissioningRegistrationA registration is stored in the device for each communications system on which the handset hasbeen logged in. A registration entry also includes a system name (e.g. A, B, C,..).If you have logged into the system with your handset, this name appears on the display.SubscriptionAfter the handset is subscribed in one or more communications systems you can use the telephoneto make and receive calls. If the Auto search feature (see page 47) is activated, the handset (in idlemode) automatically selects the nearest accessible system and logs in there. If you don't want to usethe automatic search, you can search exclusively for any desired system using the stored registra-tion entries.12CommissioningBattery: Charging statesThe charge status of the battery is indicated on the display. The displays mean:Batteries are 81 - 100 % chargedBatteries are 61 - 80 % chargedBatteries are 41 - 60 % chargedBatteries are 21 - 40 % chargedBatteries are 0 - 20 % charged•If the handset is placed in the charger cradle when the battery is completely discharged, there isno indication until a specific charge status is reached. This process can take a few minutes and isnot a malfunction.•Even when the handset is switched off, the battery slowly discharges.•When charging, the LED lights orange; when the battery is fully charged, the LED lights green (canbe deactivated in Menu   Settings -> Illumination -> LED indications -> Life indication).Battery warningWhen the battery capacity is almost exhausted, a warning sign appears on the display and a series ofwarning beeps sounds (can be deactivated in the Menu   Audio -> Attention tones). If you aremaking a call, you have approximately five minutes' talk time left before the handset switches itselfoff.Registering your handset (log-in)Your handset can be operated on up to 10 different communications systems.To do so, it must be registered or, more precisely, logged in on each station.Your system administrator will usually register the handset for operation on the telephone system.The log-in must be enabled for this. Depending on the manufacturer of the system, the enabling canvary. In most cases the IPEI of the handset is needed (found in Menu   System -> Show IPEI). Toregister the handset itself on the communication system, proceed as described in the "System"menu.  This requires a PARK number sequence and an access code (AC = Authentication Code) fromthe system administrator.
15Function overviewDisplay arrangementSymbols on the upper display line:Signal strengthMicrophone switched offBattery charge statusLoudspeaker switched onHeadset activeBluetoothheadset activeVoice box message (if available)Ringer switched offCall key pressedCall filter activeDisplay Information on the current connection status or lists and textof the menu are shown on the display. In the idle status you will see  •System name with internal call number •Your programmed user name •Current time and date•Any programmed alarm clock  and/or appointment  •Any activated features•Symbols for programmed functions The time is only displayed if it has been transferred from the system or set by you.The navigation keys are used to scroll upwards or downwards through selection lists (e.g. phonebook) and the features menu. A selectable entry is highlighted.14Function overviewFunction overviewDisplays, softkeys, LEDs and key functions  Key assignment (on delivery)Emergency call key (Aastra 630d only)EarpieceAastra 610d:+/- keys (volume adjustment)Aastra 620d/630d:3 sidekeys (programmable) andvolume adjustmentNavigation keys Open listening/Hands-freemodeCall key/consultation call keyHeadset connectionRinger on/offLEDsHotkey (programmable)(not Aastra 610d)DisplaysRear: Loudspeaker3 softkeys (programmable)Delete key Cancel key / Power on/off keyNumber/letter keysMini USB connection(not Aastra 610d)Key lockMicrophone
17Function overviewLEDThe LED (3-colour/red-orange-green) at the upper corner signals specific events that currently can-not be changed as they are required by the system or can be switched on or off by you. Please referto the following table for more details.Colour Status Description  can be switched on/offGreen Flashes quickly Incoming call YesFlashes slowly Ready indicator / Within range / Not in Yesthe charger cradleLights  Hands-free operation switched on YesLights Battery fully charged (if in the charger cradle) Yes  1)Red Flashes quickly Mandown (Aastra 630d only) NoFlashes quickly Outside the system range NoFlashes quickly Alarm call / Message NoFlashes slowly New entries in the info panel (e.g. call list) YesFlashes slowly Alarm clock / Appointment YesOrange Flashes slowly Ready indicator / Within range / Not in Yes  1)the charger cradle / Battery capacity below 60%Lights Battery is charging Yes  1)1)  coupled to the on/off switch of the ready indicator16Function overviewSoftkey line and idle displayThe three keys below the display are called softkeys. The functions assigned to these keys are shownin the bottom display line. The key function changes automatically according to the operating stateof the handset.When the handset is delivered the following symbols are shown in the softkey line:Enables selection from the redial list. Navigation menu. This is used to call up a selection list with frequently used features.These include:• Handset phone book (personal phone book)• Information lists (call list, voice box*, redial)• Profiles* if availableThese functions are also assigned to the navigation keys.You can use them to reach the phone menu (see page 38).NotePlease note that the functions of the softkeys are programmable and can have a different assign-ment later.
19Function overviewKey Duration . . . in status  DescriptionKey C short Incoming call Switch off the call signal (for currentcall only)*Lists Delete the corresponding entryEditor Delete the character left of the cursorlong Lists Delete the complete list (except phone book)Menus Return to Standby statusEditor Delete all charactersCall key  short Standby Connection set-up(pick-up), green Connection R-key functionLists Set up connection to selected  entrylong Standby Select the redial listLists Transfer the entry into predialEnd key short Standby Special Options menu(hang-up), red Connection End connectionIncoming call Reject call (if supported by   system)Menus/Lists Return to Standby statusEditor Exit Editor without changeslong Every status Switch off handsetHandset switched off Switch on handsetNumber keys  short Standby Enter number into predial-  Editor Character according to table (see page 23) Number  long Standby Connection to voice box (if available)Number  -  long Standby Select the corresponding Quick Call destination (if Quick Call programmed) Key  short Standby Enter * in predialEditor To switch between upper and lower case when entering text.long Standby Switch call signal on/off (permanent)Key  short Standby Enter # in predialEditor Character according to table (see page 23) long Standby Key lock on18Function overviewKey functionsThe following table gives an overview of the various key functions (on delivery).Key Duration . . . in status  DescriptionRight softkey short Standby Call up the whole menuMenus, Lists Call up the respective option menu or  savelong Standby Programming the key functionLeft softkey short Standby RedialMenus, Lists Confirmation (Ok)Connection Option menu during connectionlong Standby Programming the key functionMiddle softkey short Standby Display of the "Navigation Menu" (list ofthe functions that can also be accessed via the navigation keys)Menus, Lists,Editor Cancel (Esc)long Standby Programming the key functionNavigation key  short Standby Select the personal phone bookTop  Connection Increase volume (save with Ok)Menus, Lists Scroll upEditor One line upNavigation key  short Standby Select the personal phone bookBottom  Connection Reduce volume (save with Ok)Menus, Lists Scroll downEditor One line downNavigation key  short Standby Select the info listLeft  Editor Cursor back one characterlong Editor Cursor to start of lineNavigation key  short Standby Select the profile settingRight  Editor Cursor forward one characterlong Editor Cursor to end of lineHands-free short Standby Set up connection with hands-free operation  Connection Switch open listening/hands-free operation on/offLists Set up hands-free connection to selected  entry * Only if supported by the PBX
21Navigating in menusNavigating in menusExample: Setting the language1. Open the menu - depending on the configuration of your handset, press - the softkey  or- briefly press the end key   and select the menu item from the list.2. Use the navigation keys  ➐/❷to select the Settings entry from the list and press the Oksoftkey.3. Use the navigation keys  ➐/❷to select the Display entry from the list and press the Oksoftkey.4. Use the navigation keys  ➐/❷to select the Language entry from the list and press the Oksoftkey.5. Use the navigation keys  ➐/❷to select one of the languages offered from the list andpress the   softkey  (Save). 6. Exit the menu by pressing the Escsoftkey several times.Example: Personal phone book/Editor1. Open the menu - depending on the configuration of your handset, press -  the navigation key  ❷- the softkey  and select the Phone book entry/Okand Personal directory/Ok.-  one of the function keys to which you have assigned access to the phone book.2. If the phone book is empty, press the Newsoftkey.If entries already exist, press the  softkey, select New entry and confirm with Ok.3. You will see an overview of the possible entries. Select Name and press the Oksoftkey.4. Press the key repeatedly to select the character of a key, the character assigned to this keythen appears. The entry position automatically moves forward if you make no immediateentry or enter a new character. You can correct entries by moving the cursor to the num-20Function overviewKey Duration . . . in status  DescriptionHotkey (not 610d)short Standby Select the programmed function (VIP list)long Standby Programming with the desired   functionSOS key  long All states Make an emergency call (call or message,(630d only) depending on the programming and thetelephone system)Top sidekey short Standby Select the programmed function(620d, 630d only) Connection Increase volume (for current  connection only)long Standby Programming with the desired   functionSidekey  short Connection Increase volume (for current  (610d only) connection/save with Ok)Middle sidekey short Standby Select the programmed function(620d, 630d only) long Standby Programming with the desired  functionBottom sidekey short Standby Select the programmed function(620d, 630d only) Connection Reduce volume (for current  connection only)long Standby Programming with the desired functionSidekey  short Connection Reduce volume (for current  (610d only) connection/save with Ok)
23Navigating in menusEditorEntering names/call numbersThe Editor helps you to enter or change call numbers and names in the lists (e.g. phone book).The maximum length for entering call numbers (numbers) is 32 characters and for entering names(letters) is 16 characters. For entering letters the following character set can be used: Key Upper case Lower case1? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡2A B C 2 Ä Å À Á Ã Æ Ç a b c 2 ä å à á ã æ ç3D E F 3 È É Ê Ë  d e f 3 è é ê ë4G H I 4 Í Ì Î Ï ∏g h i 4 í ì î ï π5JKL5 j k l 56M N O 6 Ñ Ö Ò Ó Ô Õ Ø m n o 6 ñ ö ò ó ô õ ø7P Q R S 7 ß Ωp q r s 7 ß µ8T U V 8 Ü Ù Ú Û t u v 8 ü ù ú û9WXYZ 9  w x y z 90space , . 0 : ; _ ” ‘ ˆ ˜ space , . 0 : ; _ ” ‘ ˆ ˜ ✳Switching upper/lower case Switching lower/upper case## @ €$ £ ¥ § < > { | }  [ \ ] # @ €$ £ ¥ § < > { | }  [ \ ]22Navigating in menusber/letter to be deleted with the  ➛/❿keys and then pressing the Ckey. You can now addnew characters at this point. Every word is automatically started with an upper case letter. Press the * key several timesto switch between upper and lower case (Aor ais shown) or only upper case at the start ofthe word (Aa is shown).5. Now select the next line from ❷(e.g. Private) and press Ok.6. Enter the private call number for the entry and press Ok.7. Select the next line from ❷(e.g. Business) and press Ok.8. Enter the business call number for the entry and press Ok.9. Using this method enter the mobile call number and the e-mail address if required.10. If you want to assign a Quick Call number key to the entry, select Quick call and press Ok.Select a key 2...9 from the list and press Ok. Exit the list with Esc. In the list you can delete oroverwrite existing entries.11. You can assign a special melody to the entry that will signal a call from this call number.Select Melody and press Ok. Select a melody from the list. Press Okto save your selection.12. Press the  softkey to save the complete phone book entry.
25Basic functionsAcknowledging an appointment/alarm clockYou are notified of an appointment or alarm clock by the specified ringer and the LED flashing redfor approx. 45 sec. The display shows the corresponding text. You can acknowledge the signallingwith Esc.Adjusting the volume of the earpiece during the call  Aastra 610dPress the +/- sidekeys to increase/lower the volume of the current call or use the ➐(louder) and ❷(quieter) navigation keys.Aastra 620d/630dPress the top or bottom sidekeys to increase or lower the volume of the current call or use the ➐(louder) and ❷(quieter) navigation keys.NoteIf you press the Oksoftkey when adjusting the volume, the new value is saved (i.e. accepted as amenu entry).Switching the ringer on/offSwitch off:  Press the  star key and hold for a moment, the  symbol appears on the display.Switch on:  Press the  star key again and hold for a moment, the  symbol will switch off.Switching ringer off at callIf you want to switch off the ringer for a call that has just come in, press the Ckey. You can stillaccept the call as long as the caller has not hung up.24Basic functionsBasic functionsSwitching the handset on/offSwitching the handset offPress the End key  and hold it down for a momentor …Press the End key  briefly, select Switch offand press Ok.The handset will switch off after a confirmation prompt.Switching the handset onTo switch on press and hold the End key  until the display lights again. This can take up to 10seconds.Key lock / Phone lockSwitching on the key lockPress the router key  and hold for a moment. The key lock is activated and the  symbol appe-ars in the display.Switching the key lock offPress the softkey with the  symbol and then the router key  within 3 seconds.Releasing the phone lockIf you have locked your telephone against unauthorised use (see page 51), you can release the lockagain by pressing the  softkey and entering your PIN.Switching hands-free operation on/offPress the  loudspeaker key to switch hands-free operation on or off. The  symbol appears on the display if the hands-free operation feature is enabled.If you make a call using the handset and place it in the charger cradle, the hands-free operation fea-ture is automatically activated.
27Basic functionsAutomatic hide / Info windowIf you are in a menu or an entry mask when a call comes in, the information relevant to the call appe-ars on the display (caller name/call number etc.). After completing the call you return to the whereyou were before the call arrived.In some settings of the Devices menu information text appears that automatically scrolls if the text islong. You can also scroll manually by pressing the ➐/ ❷keys.Event window and "Info"- MenuIn the idle state of the handset an event window will appear, when e.g. new entries are saved in theCaller list, the Voice box* or the Message list*. If there is more than one new entry you will see thetopic New Infos.To access the entries you can open the Info-Menu:Just press in the idle state the Navigation key ➛and choose one menu item. Alternatively you canalso open the Info-Menu by pressing the  - key or the  -key.Vibration alarm (620d, 630d only)The vibration alarm can be switched on/off in the Menu   -> Audio -> Ringer settings ->Device -> Vibra Call.Configuring your personal directoryIn the personal directory on the Aastra 610d you can save up to 100 names with up to 3 call numberseach. In the Aastra 620d/630d this is 200 names with 3 call numbers each.How to create new entries is described in the "Example" section of the Phone Book/Editor frompage 21.26Basic functionsIlluminationThe keyboard and display are lit. The illumination is activated each time a key is pressed and remainslit for an adjustable time. You can make changes in the Menu    -> Settings -> Illumination ->Keyboard/Display .Changing the brightness/contrast of the displayAastra 610dAdjust the brightness of the display to your local conditions. Change the contrast in the Menu  -> Settings -> Display -> Contrast .Aastra 620d, 630dAdjust the brightness of the display to your local conditions. Change the brightness in the Menu -> Settings -> Display -> Brightness.Muting the handsetIf you do not want your call partner to listen in while you talk to someone in the room for instance,you can temporarily mute your handset.You are making a call.Press the  softkey. The  symbol appears on the top line of the display.Your call partner on the telephone can no longer hear you.Press the  softkey once more when you want to talk with your call partner again. Your call partneron the telephone can hear you again.* If supported by the system
29Basic functionsUsing the Bluetooth®headset  (Aastra 620d, 630d)The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc. and any use of suchmarks by [licensee name] is under license. Other trademarks and trade names are those of theirrespective owners.The Bluetoothfeature of the handsets allows registration of two Bluetoothheadsets, one of whichcan be selected for use.A registered and accessible Bluetoothheadset ( symbol) has priority over any other headset alsoconnected via cable ( symbol).If the hands-free operation key is pressed when a headset is being used (Bluetoothor connected viacable), the call is forwarded to the handset loudspeaker.If the connection between the handset and Bluetoothheadset is lost during a call, a message appe-ars on the display. You can decide whether you want to continue the call with a headset connectedvia cable if necessary, or on the handset itself, or to terminate the call.RegistrationSwitch the headset to "Pairing mode". Follow the User's Manual of the headset for this.Switch on the function in Menu   -> Settings -> Bluetooth -> BT Status die Funktion ein (An).Open the Menu   -> Settings -> Bluetooth -> Subscribe headset and then press the Newsoft-key. The headset that is found is shown by its name on the display. Confirm the display with Okand enterthe PIN of the headset. The headset is now logged in and the  symbol appears on the top line ofthe display.You can specify the active headset in the Menu   -> Settings -> Bluetooth -> Select headset.28Basic functionsEditing listsThe following options are available in the redial list and caller list:Open the respective list, e.g. in the Info menu, with the ➛navigation key.Press   to reach the Options menu.The following options are availableDial number …The previously selected entry is immediately called.Predial  The previously selected entry is transferred to the predial for calling. Add to...The call number of the entry is transferred into your personal phone book, the call filter or theVIP list.Details ...Further information on the entry is displayed.DeleteDeletes the entry.Delete allDeletes the entire list.
31Basic functionsSpecial functions (Aastra 630d only)SOSThe Aastra 630d handset has an SOS key. When it is pressed the hands-free mode is activated and apreviously saved emergency call number is called. The emergency call number is the same call number that is dialled when "Mandown" is triggered(Aastra 630d) or when a programmed emergency call key is pressed. You can enter the emergencycall number in the Menu   -> Security-> SOS number ."Mandown"The handset can trigger an automatic emergency call. Prerequisite is that you have programmed anemergency call number and the "Mandown" feature is active.When the "Mandown" feature is activated, an integrated mercury-free position switch constantlydetermines the angle of tilt of the handset. In most cases the handset is normally worn verticallywith the belt clip directly fastened to the person, for example. This position check is made every5 seconds to check that the device is still in the upright position. If the device ismore than 60 degrees from the upright position, an alarm is triggered after a settable time.The following values can be selected:DelayThis is the length of time the device can be non-vertical without triggering an alarm.PrealarmThis is the time for which an alarm –  if activated –  is signalled on the handset before the emer-gency call is sent. To disable the alarm tone (i.e. to deactivate the Mandown), press the Escsoft-key. Changing the handset position will not deactivate the alarm tone.Alarm toneThe pre-alarm can also be issued without the alarm tone and can be deactivated in the menu.Auto answerA call from the programmed emergency call number can be automatically accepted with hands-free operation if this is set in the menu.Repeat alarmThe time after which a renewed pre-alarm is sent with subsequent emergency call can be defi-ned.The "Mandown" alarm is only triggered if the device is switched on and in idle mode (i.e. not whenscrolling in the menu, for instance).30Basic functionsTelephoning via the BluetoothheadsetAnswering a call: Press the "Connect key" on the headset. The  symbol is displayed.Ending a call: Press the "End key" on the headset or the End key  on the handset.Making a call: Enter the call number on the handset and press the "Connect key" on the headset.Special key (Hotkey) /VIP list  (Aastra 620d, 630d)On delivery the special key (hotkey) at the top right of the 620d and 630d handsets is prepared asVIP phone book/VIP list for saving up to six telephones to be available very quickly  (the key can bereprogrammed).To program your favourite call numbers briefly press the hotkey followed by the Newsoftkey. Enterthe name and the call number. You can specify further call numbers under the option  -> NewEntry.To dial these call numbers briefly press the hotkey, select the desired entry and press the call key: the call will be set up.VIP list (Aastra 610d)The programmable keys of the Aastra 610d can also be assigned with a VIP phone book. To do so,program one of these keys as described on page 55 and then save the name and call number as des-cribed in the previous section.
33TelephoningAnswering a callPress the Call key.… orRejectPress the Rejectsoftkey.*   The call is rejected. The caller hears the busy signal.The ringer is deactivated, but you can still answer the call.… orPress  and select from the options that are shown.•AcceptThe call is answered.•Reject The call is rejected, the caller hears the busy signal.•Add to …The call number of the caller is transferred to the personal phone book, the call filteror the VIP list.* if supported by the systemTelephoning32Basic functionsAll settings can be made in Menu   -> Security -> Sensor Alarm -> Mandown. You can enterthe emergency call number in Menu   -> Security -> SOS number.  The emergency call numberis the same call number that is dialled by pressing the SOS key (Aastra 630) or a programmed emer-gency call key.
35Calling from your personal Phone bookIn idle mode press the ❷navigation key .t   Enter the first letter(s) of the desired name.… orSelect  an  entry  with  the  navigation  keys. You can call up the different call numbers belonging to the name with the softkey. Press the call key, the selected entry will be called.NoteYou can also call up your personal phone book via the Navigation menu (see  page 16) or via the menu access when the handset is in idle mode. Calling from the Caller listsYour handset stores the call numbers of the received and missed calls (depending on the transfer ofthe call number). 50 entries can be stored (the entries are limited to 30 in the Aastra 610d). In idle mode press the ➛navigation key, the Info menu will open.  Select Caller list and then select the name or the call number. The following symbolsindicate the respective call type:Received, answered callMissed callRejected callFiltered callForwarded callSOS call Call with automatic accept34Making internal / external callsDirect dialtPress the Call key and dial the internal or external call number with preset code forassigning external lines. Predialt   Enter the call number and press the Call key.NoteCorrecting an entry in Predial•Briefly press Ckey to delete individual digits;•Press the Ckey and hold for a moment to delete the entire call number.Calling from the Redial listIn idle mode press the softkey  . The last 30 dialled subscribers are displayed. The entries are limited to 20 in the Aastra 610d. Select an entry with the navigation keys.Press the call key, the selected call number will be dialled.NoteYou can also call up the redial feature by pressing the Call key   and holding for a moment.TelephoningTelephoning
37Multiple connectionsConsultation call / BrokeringDuring the call press the R-key (softkey) or the Call key  ; your first connection isput on hold. t   Enter the internal or external call number. You speak with the called subscriber.To alternate (swap back and forth between the call partners), press the R-key or the callkey . 36You can display further information on the entry with the  softkey. Press the call key, the selected entry will be called.NoteYou can also call up the Info menu/call list via the Navigation menu (see  page 16) or via the MenuAccess  when the handset is in idle mode. Ending callsYou can end calls by briefly pressing the End key.TelephoningTelephoning
3938Devices menuYou can call up the Devices menu in the following ways:•In Idle mode, press   .•In Idle mode, press  and select Menu. Notes on the display symbols in the menuSave To make settings in the menu, you must open the respective setting windowwith the Oksoftkey. Your entry is then saved with the  softkey.  Information You can display further information on the entries with the  softkey.  Options You can open further submenus (e.g. Delete, Edit) with the  softkey. Esc/ BackYou can cancel entries with the Escsoftkey and/or go one step back in themenu.Calling By pressing the  softkey an entry is dialled directly or transferred into pre-dial.   OverviewInfo This menu provides access to the call list, redial list and the voice box (if available).Quick access to this information is also possible on the  ➛☎navigation key or via the  key.Active featuresYou can quickly reach some important settings, such as Bluetooth, Mandown, Call filter, Profiles,Alarm clock and Appointment, via this menu.Devices menuPhone book  Allows access to your personal phone book. This can also be quickly accessed with the ❷navigation key or via the  key.Time/Alarms    In this menu you can set the date and time, program appointments and alarm clock times anddefine the formats for the date and time display.Audio In this menu you can make settings for the volume, ringer and attention tones.Call filterThe call filter* allows you to answer or block incoming calls. You can specify the call numbers andthe filter status in the menu.System In this menu you can specify the active system for your handset and administer registrations to diffe-rent systems as well as read the IPEI number and information on the status of hardware and soft-ware.SettingsDevice settings, such as key lock, key programming, user name, display settings, illumination, Blue-toothetc., are available here.Protection functionsThis menu can be accessed via the PIN (Personal Identification Number). On delivery, it is 0-0-0-0 (4 xzero). Here you can block the handset (lock), change the PIN, program an emergency number, entersettings for the alarm sensor (in 630d only) as well as completely or partially reset the handset to itsstate on delivery.* if supported by the systemDevices menu
4140Profiles This menu is used to create and administrate user profiles. Five modifiable profiles are preset."Info" menu  Caller list Shows the entries in the caller list. If a phone book entry is created for a call num-ber, the corresponding name is displayed.-> Predial Call number is transferred to the predial.Dial number... Call number will be dialled.Add to ... Call number can be transferred into the phone book, the call filter or the VIP list.Details... Information on the entry is displayed.Delete The entry will be deleted.Delete all The list will be deleted after a confirmation prompt.Voice box Displays new messages in the voice box of your communications system  (if available).Redial listDisplays the entries in the redial list. If a phone book entry is created for a call num-ber, the corresponding name is displayed.-> Predial Call number is transferred to the predial.Dial number... Call number will be dialled.Add to ... Call number can be transferred into the phone book, the call filter or the VIP list.Details... Information on the entry is displayed.Delete The entry will be deleted.Delete all The list will be deleted after a confirmation prompt.Devices menu"Active features" menuThe "Active features" menu provides quick access to a number of selected menu items. Bluetooth Switch on/off and configure the Bluetooth function - not Aastra 610d (see  page50).Mandown Switch on/off and configure the Mandown function - Aastra 630d only (see page52).Call filter  Access to the filter settings* (see page 46).Profiles Quick swapping between the various profiles (see page 53).Alarm clock Switch on/off and configure the alarms 1...3. The respective alarm clock is selectedwith the ➛and ❿keys  (see page 43).Appointment Switching on/off and configuring the appointments 1...3. The respective appoint-ment  is selected with the ➛and ❿keys  (see page 42)."Phone book" menuThe "Phone book" menu provides access to your personal directory.Further details for dialling from the phone book and for creating a new entry can be found on pages 35 and 21.You make changes in the phone book as follows:Personal directory Select an entry from the list.-> Edit The entry can be modified.New entry Create a new entry.Add to ... The following selected call number will be transferred to the  call filter or the VIP list.Delete The entry will be deleted.Memory Shows the number of already stored entries.* if supported by the systemDevices menu
43Alarm clockShows the list of alarms. Up to three alarm times can be entered and activated.Status: On/Off  ChangeHere you can choose between Once (at the next specified timewith this value), Daily (repeats daily) and Off.Time Show the time set for the alarm.ChangeChanges the time setting.Text Shows the text entered for the alarm.ChangeChange/enter the text (max. 32 characters).NoteIf the ringer is deactivated, there is also no acoustic signalling to indicate a setalarm or appointment.Format setting Setting option for the display formats of the date and time.Time formatChange the time format (24-hour or 12-hour am/pm)Date formatChange the date format dd.mm.yy, e.g. 27.12.08mm/dd/yy, e.g. 12/27/08yy-mm-dd, e.g. 08-12-08dd-mmm-yyyy, e.g. 27-Dec-200842"Time/Alarms" menuYou can move the entry position of all settings with the  ➛and ❿☎navigation keys and change thevalues with the ➐and ❷keys.Date/TimeTime Show the time currently set in the handset.ChangeChange the time setting.Date Show the date currently set in the handset.ChangeChange the date setting.NoteIf the time and the date are transferred from the telephone system, you cannotmake this setting.AppointmentShows the list of appointments. Up to three appointments can be entered and activated.Status: On/OffChangeActivate or deactivate appointment.Time Show the time set for the appointment.ChangeChange the time setting.Date Show the date set for the appointment.ChangeChange the date setting.Text Show the text entered for the appointment.ChangeChange/enter the text (max. 32 characters).NoteIf the ringer is deactivated, there is also no acoustic signalling to indicate a setalarm or appointment.Devices menuDevices menu
45Noise detectionWhen this function is active, the volume of the ringer is automatically raised ifthere is loud background noise.Attention tones Select whether the respective attention tones should be activated or not. Key click Audible confirmation when a key is pressed.Confirm tones Confirm successful/unsuccessful settings.End of menu Alert tone on reaching the end of a menu list.Battery warning Alert tone if the battery is almost empty.Only a few minutes are left before the call will be disconnected.Coverage warning Alert tones if the wireless connection threatens to disconnect.Loud environmentIf the handset is mainly used in a loud environment, the handset attempts to improve thevoice transmission.44Devices menuDevices menu"Audio" menuOpen the menu, select Audio and press Ok. Volume settingsEarpiece Shows the currently set volume. You can change the volume with the   ➛and❿navigation keys. HandsfreeShows the currently set volume. You can change the volume with the   ➛and❿navigation keys. Corded headset Shows the currently set volume. You can change the volume with the   ➛and❿navigation keys (does not apply to Bluetooth headset).Ringer Shows the currently set volume. You can change the volume with the   ➛and❿navigation keys. Ringer settingsMelodiesInternal Selection of melodies for internal calls.External Selection of melodies for external calls.VIP call Selection of melodies for incoming VIP calls.Emergency call Selection of melodies for incoming emergency calls.Alarm clock Selection of melodies for the alarm.Appointment Selection of melodies for the appointments.NoteYou can listen to the melody with the  softkey before saving. Type Select whether the call tone melody should be played once or repeated.Device Select whether signalling is made via loudspeaker (ringer), vibration alarm (notAastra 610d) and/or on the headset. Volume Shows the currently set volume. Change the volume with the ➛and ❿navi-gation keys (increasing or level 1…7).
47"System" menuSelect systemAuto searchThe handset logs in automatically to the system currently available with thehighest signal strength. The handset can only be logged in if it has been regis-tered on the applicable system beforehand. If necessary, please contact yoursystem administrator.[Systemname]List of systems on which the handset is already registered. The selected systemis marked.Select a system with the navigation keys. When is pressed, the handset attempts establish a connection.SubscriptionsNew systemEnter the access code and (optionally) the PARK code. Ask your system adminis-trator for information.[Systemname]You can change the system name and the call number with Edit. The changeonly affects the indication on the idle display. Your actual call number is notchanged. You can delete the registration to the respective system with Delete.Show IPEI The international handset ID is displayed. This may be required for identifying your handsetin the telephone system.Version infoInformation concerning the handset hardware and software status is displayed.46Devices menuDevices menu"Call filter" menu  The call filter* allows you to answer or block incoming calls. The Accept List setting only allows thecall numbers in the call number list to be signalled (no other calls). The Block List setting means allcalls are signalled except the calls from the call numbers in the list. The call number list can contain10 entries.Status You can change the filter mode.Accept listCalls for the call numbers entered in the list are accepted.Block listCalls for the call numbers entered in the list are  rejected.Filter off Call filter is deactivated.List of numbersShows the entries in the call number list. If the list is empty, press the Newsoftkey.Name Enter a name for the call number.Number Enter the call number. This entered caller number must correspond exactly tothe call number transferred by the network.or …Select a call number from the list.-> Edit The entry can be modified.New entry Create a new entry.Dial number... The entry will be dialled immediately.Predial The entry will be transferred to the predial.Add... Transfers the call number into the personal phone book  or the VIP list.Details... Shows call number and name.Delete The entry will be deleted.Delete all The list will be deleted after a confirmation prompt.* if supported by the system
4948Devices menuChargerHere you can select for how long the display illumination remains active if thedevice is placed in the charger cradle (off, 1... 240 sec.).LED indicationsYou can switch the LED indicators on/off according to requirements (see alsopage 17).Life indication Slowly flashing green or orange LED. Deactivated if the charge indication(orange or green LED) is also deactivated.Incoming call Rapidly flashing green or orange LED for incoming call.Infos Slowly flashing red LED for a new entry,e.g. in the call list.Handsfree Lights green LED when the loudspeaker  is activated.Appointment Slowly flashing red LED when the appointment is signalled.Alarm clock Slowly flashing red LED when the alarm time  is signalled.Device optionsSilent chargingThe handset does not give an acoustic signal for any calls when it is in the char-ger cradle. When you take it out, calls are acoustically signalled again.  The callsare recorded in the call list.“Silent Charging“ will not apply when the handset is charged via the USB con-nector (Aastra 620d, 630d).Auto. key lockIf this option is active, the keyboard is automatically locked after approx. 60 secif no key is pressed.Auto. answer (charger)If this feature is active, the handset automatically answers a call if it is taken outof the charger cradle.Devices menu"Settings" menuKey lockPress Okto activate the key lock (see also page 24).Key programmingThis menu item allows you to program the softkeys (except for Esc), the sidekeys and thehotkeys (not Aastra 610d). After calling up the function press the key that you want to pro-gram. A selection list of programmable features appears. It is the same selection that is dis-played if the programmable key is pressed and held down in Idle mode. How to proceed isdescribed on page 55 .User nameYou can enter a name here that will be displayed in Idle mode.DisplayLanguage Select a display language from the list.Font settings(Aastra 620d/630d only) You can select a small, medium or large font for texton the display.Colour scheme(Aastra 620d/630d only) You can choose between five different backgroundcolours for the selection menus.Brightness (Aastra 620d/630d only) You can change the brightness of the display to matchlocal lighting conditions.Contrast (Aastra 610d only) You can change the contrast of the display to match locallighting conditions.IlluminationDisplay dimmingThis setting means that the display illumination remains permanently active ordimmed for 30 sec. even when the device is in Idle mode or in the chargercradle. This setting reduces the life of the battery.Display Here you can select for how long the full display illumination (each time a key ispressed, for instance) remains active (10 ... 240 s).Keyboard Here you can select for how long the keyboard illumination remains active eachtime a key is pressed (1 ... 240 s).
51"Security" menuYou need to enter a PIN to open the "Security" menu. On delivery this is set to 0 0 0 0 (4 x zero).Phone lockThe phone is locked. Incoming calls only can be accepted. Any programmed emergency callkey or SOS key of the Aastra 630d can also be used. To remove the phone lock, see page 24.Change PINYou can change the PIN for the "Security" menu. Enter the new PIN and repeat the entry ofthe new PIN.SOS numberEnter the number to be called in case of emergency. This emergency number is dialledwhen the SOS key is pressed (Aastra 630d), when a programmed emergency key is pressedor by the Mandown feature (Aastra 630).Reset to defaultYou can reset different areas of your settings to the status they had on delivery.  Phone bookYou can delete your phone book entries after a confirmation prompt. All lists All lists (call list, redial list, call list) are deleted after a confirmation prompt. User settings All user settings (e.g. language, display settings) are deleted after a confirma-tion prompt. All The handset is reset to the status it had on delivery after a confirmationprompt. The registration of the handset on the system and the PIN are notaffected by this. 50Devices menuDevices menuAuto. answer (call)If this feature is active, the handset automatically answers a call after the firstcall tone (useful when using a headset - not Bluetoothheadset).NoteIf you do not use the headset, please deactivate this feature as unnoticedeavesdropping by the caller is possible.Voice box no.The number of your voice box is stored here. This call number is dialled if the 1 key is pres-sed and held for a moment. If the call number of the voice box is administered by the tele-phone system, this setting does not appear.BluetoothStatus Shows whether Bluetooth is activated or not. Press Changeto activate or deacti-vate. Select headsetSelect the subscribed headset you want to use from the list.Subscribe headsetPress Newto register a new headset for use on your handset. Also carry out thenecessary steps on the headset (see User's Manual for the headset).The handset searches for any Bluetoothdevices within range for approx. 30 sec. Select an entry, press Okand enter the PIN of the headset. The "pairing" is star-ted. If you want to change the name or to delete a Bluetoothheadset, select ...-> Edit Change the name of a headset.Delete The registration data for the respectiveheadset are deleted after a confirmationprompt.
5352Aastra 630d only:Descriptions of the "Mandown" feature can be found on page 31.Alarm sensorMandownStatus Shows whether "Mandown" is activated or not. Press the Changesoftkey to activate or deactivate. Auto answerYou can select whether your telephone automatically answers acall from the selected emergency number in hands-free mode.Alarm tone You can configure whether or not the pre-alarm should emit analarm tone.Delay You can set the time for how long the device can be non-verticalbefore triggering an alarm (off, 2 sec ... 60 sec).Prealarm You can set the time that should elapse until the actual emergencycall is sent. A call tone increasing in volume (alarm tone) is signal-led during this time (if not deactivated). The alarm can still be can-celled during the pre-alarm (off, 5 sec ... 240 sec).Repeat alarmIf the emergency call is not successful, (e.g. because the line isbusy), it is possible to set after which time a repeated pre-alarm issent with subsequent emergency call (off, 5 sec ... 240 sec).Devices menu"Profiles" menu   When the handset is delivered it has four profiles with characteristic settings pre-programmed forthe "intended purpose". A fifth profile is available for further settings. You can change all profilesand rename them if required. SelectNo profile No profile can be used with this setting. The settings you select apply. Normal Parameters for "normal" use are configured in this profile.Headset Parameters for using a headset are preset in this profile.Meeting Parameters for using the handset during a meeting are preset in this profile.Loud Parameters for use in a particularly loud environment are preset in this profile.<Profile 05>This profile is available for your own use.Settings Choose one of the profiles to make changes.Profil nameChange the name of the profile if required.Ringer volume  Set your preferred ringer volume (off, rising, 1...7).Ringer device Configure where or how the ringer should be signalled (loudspeaker, headset,vibration alarm).Ringer typeSelect whether the ringer should ring once or repeatedly.Key click  Switch the key click on or off.Noise detectionSwitch the automatic noise detection for a louder ringer on or off.Loud environmentAdapt the speech quality in a loud environment.Devices menu
55Key programmingYour handset allows you to assign specific keys with frequently used functions.Aastra 610dThe 3 softkeys below the display can be programmed.Aastra 620d/630dThe 3 softkeys below the display and the three sidekeys can be programmed. The hotkey (right side-key) can also be assigned.The symbol/icon of the programmed function is shown on the display (except for hotkey) after pro-gramming. A short key press is sufficient to call up the function in Idle mode.Programming (general)Press the respective key and hold it for a moment or use the Menu  -> Settings -> Key pro-gramming (see page 48).The following selection is offered:Default key Assigns the key with the function it had on delivery.No function The key is not assigned.VIP list The key is assigned with a number list (max. 6 entries).Alarm clock You can program entry to the alarm clock settings.Appointment You can program entry to the appointment settings.Profile The selection of profiles is offered.Info The Info menu (caller list, redial,...) can be programmed.Caller list The caller list is accessed.Redial list The redial list is accessed.Voice box Assigns the key with the selection of the voice box.Menu The key is assigned with the menu access.54Silent chargingSwitch the "Silent charging" on or off.LED incoming callSwitch the LED display for an incoming call on or off.Key programmingDevices menu
57AppendixCare and MaintenanceYour telephone is a product that meets the highest design and manufacturing standards. It shouldtherefore be treated with care. The suggestions listed below will help you enjoy this product for along time.Follow all the safety precautions given on page 1. These precautions apply to the handset, the char-ger cradle and the rechargeable batteries (i.e. the entire telephone) as well as to the accessories.To clean the telephone, first pull out the adapter plug of the charger cradle from the mains socket.Wipe the devices first with an antistatic cloth or soft, damp leather rag and then with a dry cloth.Note: Never spray your telephone with cleaning agents or solvents. Clean the handset and chargercradle contacts with a lint-free cloth.Environmental Characteristics and Disposal(applicable for the European Union)This product is environmentally friendly and can be recycled. It was manufactured in accordancewith statutory requirements and with the Manufacturers’ Guideline 2002. It was developed withspecial focus on low energy consumption, long life, and ease of servicing. The few materials used inits manufacture are environmentally friendly. Help to extend the life of your communications deviceby adhering to the safety instructions, the information on battery lifetime, and the care and mainte-nance instructions.Instructions for disposalTo prevent potential consequences to the environment and to health from the disposal of hazardoussubstances contained in electrical and electronic devices, the directives of the European Parliamentand the Council with respect to•  Directive 2002/96/EC "Waste electrical and electronic equipment" and•  Directive 2002/95/EC "Restriction of the use of certain hazardous substances in electrical andelectronic equipment"are nationally and legally regulated in all countries of the EU.The legislation is aimed primarily at the avoidance of waste from electrical and electronic equipmentas well as at the re-utilization of materials, the final recycling and other forms of recycling suchwaste in order to reduce the amount of waste to be disposed of as well as to decrease the entry ofhazardous substances from electrical and electronic equipment into the waste system.56Personal directory Access to the phone book is assigned.Navigation Assigns the key with the alternative access to the functions that lie on the navigation keys.Emergency call Assigns the key as an emergency call key. The number that was stored in the Menu   -> Security -> SOS number is dialled. Only assign the sidekeys or the hotkey with this function. NoteIf you have reprogrammed the functions from the status they had on delivery, you can access thesefunctions through a number of alternatives.Redial … by pressing the Call key  and holding it for a moment. Navigation … by pressing the keys    , ,  , Menu … by pressing the End key  and selection of Menu. Special features for the VIP list  (on the hotkey on delivery)You can only assign the VIP list with numbers if you have programmed the key. After the first call upof the key enter the corresponding number and the name so that the list is available.AppendixKey programming
59Limited Waranty (applicable for sales in USA, Canada)Aastra warrants this product against defects and malfunctions during a one (1) year period from thedate of original purchase. If there is a defect or malfunction, Aastra shall, at its option, and as theexclusive remedy, either repair or replace the telephone set at no charge, if returned within the war-ranty period. If replacement parts are used in making repairs, these parts may be refurbished, or maycontain refurbished materials. If it is necessary to replace the telephone set, it may be replaced witha refurbished telephone of the same design and color.If it should become necessary to repair or replace a defective or malfunctioning telephone set underthis warranty, the provisions of this warranty shall apply to the repaired or replaced telephone setuntil the expiration of ninety (90) days from the date of pick up, or the date of shipment to you, ofthe repaired or replacement set, or until the end of the original warranty period, whichever is later.Proof of the original purchase date is to be provided with all telephone sets returned for warrantyrepairs.ExclusionsAastra does not warrant its telephone sets to be compatible with the equipment of any particulartelephone company. This warranty does not extend to damage to products resulting from improperinstallation or operation, alteration, accident, neglect, abuse, misuse, fire or natural causes such asstorms or floods, after the telephone is in your possession.Aastra shall not be liable for any incidental or consequential damages, including, but not limited to,loss, damage or expense directly or indirectly arising from the customers use of or inability to usethis telephone, either separately or in combination with other equipment. This paragraph, however,shall not apply to consequential damages for injury to the person in the case of telephones used orbought for use primarily for personal, family or household purposes.This warranty sets forth the entire liability and obligations of Aastra with respect to breach of war-ranty, and the warranties set forth or limited herein are the sole warranties and are in lieu of all otherwarranties, expressed or implied, including warranties or fitness for particular purpose and merch-antability.Warranty Repair ServicesShould the set fail during the warranty period; In North America, please call 1-800-574-1611 for further information. Outside North America, contact your sales representative for return instructions. You will be respon-sible for shipping charges, if any. When you return this telephone for warranty service, you mustpresent proof of purchase.58The product you have purchased was developed with a state-of-the-art environmental and recyclingorientation and thus complies with the guidelines of the European directives.The product is marked with the symbol indicated. When disposal is required, thissymbol obligates the owner of the product to dispose of this product at a collectionpoint separate from unsorted household waste. Suitable facilities for the return ofelectrical and electronic waste have been created for this purpose. Obsolete equip-ment can be brought free of charge to these public reception points for disposal(bring system). Please refer to the information from the responsible offices in thecities and communities for the location of these disposal reception points.Caution!Electrical equipment waste does not belong in domestic waste. Bring this type ofwaste free of charge to the recognised reception points for disposal.Declaration of Conformity (applicable for the European Union)CE markThis device complies with the requirements of the EU directive:1999/5/EU directive on radio and telecommunications terminal equipment and the mutual recogni-tion of their conformity. Conformity to the above-mentioned directive is confirmed by the CE markon the device.AppendixAppendix
61AccessoriesYou can obtain the following accessories through your dealer:AccessoriesAastra 610, 620, 630 / Charger with international AC-AdapterAastra 610d / Handset Aastra 620d / HandsetAastra 610d / HandsetAastra 620d, 630d / Power-Battery-PackAastra 620d / Cover for Power Battery CompartmentAastra 630d / Cover for Power Battery CompartmentAastra 610d, 620d / Rotary-Belt Clip Neck Band Aastra 610d, 620d, 630d with Neck Band Holder for Aastra 630Aastra 610d / Leather Pouch Aastra 620d / Leather PouchAastra 60d / Leather PouchAastra 620d, 630d / Mini USB Service Cable60After Warranty ServiceAastra offers ongoing repair and support for this product. This service provides repair or replace-ment of your Aastra product, at Aastra's option, for a fixed charge. You are responsible for all ship-ping charges. For further information and shipping instructions;In North America, contact our service information number: 1-800-574-1611.Outside North America, contact your sales representative.Note: Repairs to this product may be made only by the manufacturer and its authorized agents, orby others who are legally authorized. This restriction applies during and after the warranty period.Unauthorized repair will void the warranty.AppendixAppendix
63Technical specifications applicable for  … USA, Canada All other countriesStandard: DECT / GAP DECT / GAPNo. of channels: 60 duplex channels 120 duplex channelsFrequencies: 1920 MHz to 1930 MHz (UPCS) 1880 MHz to 1900 MHzDuplex method: Time-division multiplex,  Time-division multiplex, 10 ms frame length 10 ms frame lengthChannel subdivision: 1728 kHz 1728 kHzBitrate: 1152 kbps 1152 kBit / sModulation: GFSK GFSKVoice coding: 32 kpbs 32 kpbsOutput: 5 mW (average output per  10 mW (average output per active channel) active channel)Range: up to 980 ft outdoors,  up to300 m outdoors,160 ft indoors up to 50 m indoorsBluetoothQD ID: B014700 B014700Power supply charger cradle: AC 110 – 240 V / 50 /60 Hz AC 110 –240 V / 50 /60 HzHandset operating time Standby time / talk time Standby time / talk time/Standard battery: up to 95 hours / 15 hours up to 100 hours / 12 hoursHandset operating time/Power battery: Standby time / talk time  Standby time / talk time  up to 190 hours / 30 hours up to 200 hours / 24 hoursStandard rechargeable battery: Li-Ion battery, 3.7 V / 850 mAh Li-Ion battery, 3.7 V / 850 mAhPower battery  (Aastra 620d / 630d): Li-Ion battery, 3.7 V / 1800 mAh Li-Ion battery, 3.7 V /1800 mAhTime to charge completely discharged standard batteries: 2-4 hours 2-4 hoursPermissible ambient temperaturesfor operating the handset: 41° F to 104° F 5° C to 40° CPermissible storage temperature: 23° F to 113° F -5°C to +45°CCharger cradle dimensions: Length / Width / Height  Length / Width / Height 2.99 x 2.95 x 0.94 in 76 x 75 x 24 mm62HeadsetsYou will find a list of corded headsets and Bluetooth headsets that you can purchase from your dea-ler on our Internet site. Aastra headsets that comply with the safety requirements of EN60950-1 Item6.2. are recommended. This does not constitute any appraisal of the acoustic and functional qualityof the headsets of the individual manufacturers.USB chargerIf you want to charge your Aastra 610d, 630d handset with a USB charger, please use one of thecommercially available USB plug-in power supplies with the following data.Connection type: Mini USB connectorType: Switching power supply: 100V to 240 V / 50 – 60 Hz  Output power: approx. 5 WOutput voltage: 5 V/DCOnly use a plug-in power supply unit certified by your authorities.AppendixAppendix
6564Handset dimensions: Length / Width / Height  Length / Width / Height Aastra 610d / 620d:  5.31 x 1.93 x 0.89 in 135 x 49 x 22.5 mmAastra 630d:  5.31 x 2.08 x 0.89 in 135 x 53 x 22.5 mmCharger cradle weight: 1.41 oz 40 gHandset weight: Aastra 610d / 620d (with battery):  Aastra 610d /620d (with batt.):4.23 oz  120 gAastra 630d (with battery): Aastra 630d (with batt.):4.41 oz 125 gLength of power supply cable: 5 ft 1,5 mAppendixMenu StructureInfo Caller list  >List<   Voice box 1)  >Call<   Redial list  >List<     Active features  Bluetooth 2)    Call filter    Profiles   Alarm   Appointment      Phone book  Personal directory  >List<         Time/Alarms Date/Time  Time    Date   Appointment  Apointment1, 2, 3  Status    Time    Date    Text  Alarm  Alarm 1, 2, 3  Status    Uhrzeit    Text  Format settings  Time format  24h , 12h am/pm    Date format  dd.mm.yy    mm/dd/yy     yy-mm-dd      dd-mmm-yyyy    Audio Volume settings Earpiece    Handsfree    Corded headset    Ringer   Ringer settings  Melodies  Internal    External    VIP call      Emergency call      Alarm    Appointment   Type Repeat    Once    Device Ringer      Vibra call 2)    Headset    Volume    Noise detection Appendix
6766Appendix    Security 3)  Phone lock     Change PIN     SOS number     Alarm sensor 4) Mandown Status     Auto answer       Alarm tone       Delay       Pre alarm     Repeat alarm   Reset to default  Phone book     All lists     User settings    All     Profiles Select    Settings No profile    Normal    Headset    Meeting     Loud     Profile 05 1) Depending on model2) Not Aastra 610d 3) Available after entering PIN4) Aastra 630d only Appendix  Attention tones  Key click     Confirm tones     End of menu     Battery warning    Coverage warning     Loud environment       Call filter 1) Status    List of numbers  >List<     System  Select system  Auto search    >System name<  Subscriptions New system     >System name<  Edit    Delete  Show IPEI     Version info       Settings Key lock     Key programming  >Key<   User name    Display Language    Font settings 2)     Color schemes 2)     Brightness/Contrast  Illumination Display dimming     Display     Keyboard     Charger     LED indications   Device options  Silent charging     Auto. key lock     Auto. answer (charger)     Auto. answer (call)   Voice box no. 1)    Bluetooth 2)  BT Status     Select headset     Subscribe headset
6968LLanguage.....................................................21, 48LED................................................................17, 49Loud environment............................................45MMaking calls.......................................................34Mandown..............................................31, 41, 52Menu Structure.................................................65Micro SD card.......................................................9Mounting bracket...............................................6Muting the handset .........................................26NNoise detection.................................................45Notes on safety ...................................................2PPhone lock .........................................................51PIN.......................................................................51Power battery......................................................5Power supply.......................................................9Prealarm.............................................................31Precautions........................................................10Predial.................................................................34Prescribed use .....................................................2Profiles................................................................41RRedial............................................................34, 40Registering your handset................................12Reset to default.................................................51Ringer setting....................................................44Ringer type ........................................................44Rotary clip ............................................................6SSelect headset...................................................50Select system.....................................................47Show IPEI ...........................................................47Silent charging..................................................49Softkeys..............................................................14SOS......................................................................31SOS number.......................................................51Special key.........................................................30Standard battery.................................................5Standby time.....................................................11Subscribe headset............................................50Subscription ......................................................13Subscriptions.....................................................47Switching the ringer on/off ............................25TTalk time.............................................................11Technical specifications...................................63Time....................................................................42UUSB........................................................................8User name..........................................................48VVersion info........................................................47Vibration alarm.................................................27VIP list...........................................................30, 56Voice box............................................................40Voice box no......................................................50Volume...............................................................44AppendixIndex"Active features" menu ...................................41"Audio" menu....................................................44"Info" menu .......................................................40"Phone book" menu.........................................41"Security" menu................................................51"Settings" menu................................................48"System" menu .................................................47"Time/Alarms" menu .......................................42AAccessories ........................................................61Acknowledging an appointment/alarm.......25Alarm clock..................................................41, 43Alarm sensor......................................................52Alarm tone.........................................................31Appointment ..............................................41, 42Attaching the carrying strap.............................6Auto. answer (call)............................................50Auto. answer (charger)....................................49Auto. key lock....................................................49BBattery warning..........................................12, 45Bluetooth.....................................................41, 50Brightness....................................................26, 48Brokering ...........................................................37CCall filter.............................................................41Caller list ......................................................35, 40CE mark ..............................................................58Charging time ...................................................11Charging unit.......................................................8Colour scheme ..................................................48Confirmation tones ..........................................45Contrast .......................................................26, 48Coverage warning............................................45DDate.....................................................................42Declaration of Conformity ..........................2, 58Delay...................................................................31Delivery ..............................................................51Device.................................................................44Device options ..................................................49Devices menu....................................................38Direct dial...........................................................34Display................................................................48Display dimming ..............................................48Displays ..............................................................14Disposal..............................................................57EEarpiece volume ...............................................25Editing lists ........................................................28End of menu......................................................45Ending calls........................................................36Entering names/call numbers........................23Environmental Characteristics .......................57External charging connection ..........................8FFont.....................................................................48HHands-free.........................................................24Headset connection ...........................................7Hearing aids.........................................................3Hotkey ................................................................30IIdle display.........................................................16Illumination.................................................26, 48Important information about the battery......9KKey assignment.................................................14Key click..............................................................45Key functions.....................................................18Key lock........................................................24, 48Keyboard............................................................48

Navigation menu