Mitsubishi Electric Sanda Works AR0H Car Audio User Manual 05

Mitsubishi Electric Corporation Sanda Works Car Audio 05

User Manual

114FeaturesAudio System*About Your Audio SystemThe audio system features AM/FM radio. It can also play WMA/MP3/AAC files, USB flash drives, and iPod devices.You can operate the audio system from the buttons and switches on the panel, or the remote controls* on the steering wheel.About Your Audio SystemiPod is a trademark of Apple Inc.Remote Controls*USB Flash DriveiPodAuxiliary Input JackUSB Adapter Cable** Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
115Audio System*USB Adapter Cable*FeaturesUSB Adapter Cable*1. Unclip the USB connector and loosen the adapter cable.2. Install the iPod dock connector or the USB flash drive to the USB connector.USB Adapter Cable*•Do not leave the iPod or USB flash drive in the vehicle. Direct sunlight and high temperatures may damage it.•Do not use an extension cable with the USB adapter cable.•Do not connect the iPod or USB flash drive using a hub.•Do not use a device such as a card reader or hard disk drive, as the device or your files may be damaged.•We recommend backing up your data before using the device in your vehicle.•Displayed messages may vary depending on the device model and software version.If the audio system does not recognize the iPod, try reconnecting it a few times or reboot the device. To reboot, follow the manufacturer's instructions provided with the iPod.USB Connector* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
116Audio System*Auxiliary Input Jack*FeaturesAuxiliary Input Jack*Use the jack to connect standard audio devices.1. Open the AUX cover.2. Connect a standard audio device to the input jack using a 3.5 mm stereo miniplug.The audio system automatically switches to the AUX mode.Audio AntennaYour vehicle is equipped with a pillar antenna on the front right pillar.Auxiliary Input Jack*To switch the mode, press any of the audio mode buttons. You can return to the AUX mode by pressing the USB/AUX button.CoverAudio AntennaBefore using a “drive-through” car wash, stow away the antenna by pushing it by hand. This prevents the antenna from being damaged by the car wash brushes.NOTICE* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
117ContinuedFeaturesAudio System Basic Operation*To use the audio system function, the ignition switch must be in ACCESSORY  or ON .Use the selector knob and SETUP button to access and operate most of the audio features.Selector knob: Press the knob first before using the selector knob. (Selector Icon) appears on the display. Rotate left or right to scroll through the available choices. Press to set your selection.SETUP button: Press to change the display while using the audio system. Each time you press the button, you can see a menu option you can select.Audio System Basic Operation*These indications are used to show how to operate the selector knob.Rotate to select.Press to enter.Selector KnobSETUP Button* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
Audio System Basic Operation*118FeaturesDisplay an available menu option for the audio system is in.■Menu options available for all the audio modesCLOCK:Clock* P. 76CLICK:When you operate the audio system using the selector knob, you hear a clicking sound. You can mute this sound from the CLICK option.Rotate to select OFF. Press to enter. To turn this feature on again, select ON.■Each Time You Press the SETUP Button:Audio System Basic Operation*Available menu options for each audio mode are:AM/FM Radio•A-SELAuto Select (A.SEL) P. 122•SCAN STARTHow to Start Scanning P. 122•ERASEHow to Delete Preset Memory P. 122iPod•DISPHow to Select a Title Display P. 125•PMODEHow to Select a Play Mode P. 125USB Flash Drive•DISPHow to Select a Title Display P. 128•PMODEHow to Select a Play Mode P. 128Displays the available audio menu options one after the other.The mode the audio system is in* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
119Audio System Basic Operation*Audio Remote Controls*FeaturesAudio Remote Controls*Allows you to operate the audio system while driving.MODE ButtonCycles through the audio modes as follows:FMÆAMÆAUXVOL (Volume) ButtonPress : To increase the volume.Press : To decrease the volume.CH (Channel) Button•When listening to the radioPress !: To select the next preset radio station.Press ": To select the previous preset radio station.Press and hold !: To select the next strong station.Press and hold ": To select the previous strong station.•When listening to an iPod, or USB flash drivePress !: To skip to the next song.Press ": To go back to the beginning of the current or previous song.•When listening to a USB flash drivePress and hold !: To skip to the next folder.Press and hold ": To go back to the previous folder.Audio Remote Controls*Some mode appears only when an appropriate device or medium is used.MODE ButtonVOL ButtonCH Button* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
120Audio System Basic Operation*Adjusting the SoundFeaturesAdjusting the SoundPress the (Sound) button, and rotate to adjust the sound setting. Press .Each time you press the button, a sound mode switches as follows.Adjusting the SoundWhen the adjustment level reaches the centre, you will see C in the display. ButtonSelector KnobThe mode the audio system is in%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
121Audio System Basic Operation*Playing the AM/FM RadioContinuedFeaturesPlaying the AM/FM Radio / (Tune/Seek) ButtonsPress to search up and down the selected band for a station with a strong signal.Selector KnobTurn to adjust the volume. Press and turn to select an item, then press to set your selection.SETUP ButtonPress to display available radio features. (Power) ButtonPress to turn the audio system on and off. / (Preset) Buttons (Up to 30 frequencies for each band)To store a station:1. Tune to the selected station.2. Press and hold until you hear a beep.To listen to a stored station:●Press , rotate to select a band, then press again.●Press to go to the next preset station, and to go to the previous preset station.FM/AM ButtonPress to select a band.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
Audio System Basic Operation*Playing the AM/FM Radio122FeaturesUse the auto select feature to scan both bands and store the strongest station in each preset.1. Press the SETUP button until A.SEL displays.2. Rotate to select to ON. Press .The system goes into scan mode for several seconds.To turn off auto select, select OFF at step 2. This stores the presets you originally set.Use the scan feature to sample each of the strongest stations on the selected band for 10 seconds.1. Press the SETUP button until SCAN START displays.2. To start scanning, press .3. When you find the station you want to continue listening, press again.The scan feature is turned off.You can delete the stations at once or one station at a time in the preset memory.1. Press the SETUP button until ERASE displays.2. Rotate to select ALL or the preset station you want to delete.3. Press .To delete all the stations at once, select OK?, then press again.■Auto Select (A.SEL)■How to Start Scanning■How to Delete Preset MemoryPlaying the AM/FM RadioThe ST indicator appears on the display indicating stereo FM broadcasts.Stereo reproduction in AM is not available.You can store 30 AM stations and 30 FM stations into the preset button memory.Auto Select function scans and stores up to 6 AM stations and 12 FM stations with a strong signal into the preset button memory.If you do not like the stations auto select has stored, you can manually store your preferred frequencies.The stations you store in the preset memory are automatically listed in a sequential order. The station you stored last always goes to the end of the list. This order cannot be changed.If you add a station when there are always 30 stations stored in the memory, the station, which has been in the list for the longest time, is overwritten by the newly added station.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
123Audio System Basic Operation*Playing an iPodContinuedFeaturesPlaying an iPodConnect the iPod using your dock connector to the USB adapter cable, then press the USB/AUX button.USB Adapter Cable* P. 115 / (Skip) ButtonsPress or to change songs.Press and hold either button to fast forward or rewind within the song.Selector KnobTurn to adjust the volume. Press and turn to select an item, then press to set your selection.SETUP ButtonPress to display available iPod features. (Power) ButtonPress to turn the audio system on and off.USB/AUX ButtonPress to select iPod (if connected).* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
Audio System Basic Operation*Playing an iPod124Features1. Press to display the iPod menu.2. Rotate to select a menu.3. Press to display the items on that menu.4. Rotate to select an item. If you want to start play songs within that category, press the button. To select a specific song, press to display songs listed within that category.5. Rotate to select a song. Press or the button.■How to Select a File from the iPod MenuHow to Select a File from the iPod MenuiPod Menu ItemsPlaylistArtistsAlbumsSongsShuffle■If you want to select a song from PLAYLIST to play a selectable playlist or to play a selectable songSelectable iPod menuSelectable playlistSelectable song%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
125Audio System Basic Operation*Playing an iPodFeaturesIf the iPod data you are playing is recorded with text data, it can be displayed.1. Press the SETUP button until DISP displays.2. Rotate to select the text data information you want to see. Press .You can select repeat and random when playing a track.1. Press the SETUP button until PMODE displays.2. Rotate to select a mode, then press .■To turn off a play mode1. Press the SETUP button until PMODE displays.2. Rotate to select OFF, then press .■How to Select a Title DisplayHow to Select a Title DisplayTitle Display Mode Menu ItemsNUMBER: Count number of available songsARTIST: Artist nameALBUM: Album nameSONG: Song nameThe display shows up to eight characters of text data.■How to Select a Play ModeHow to Select a Play ModePlay Mode Menu ItemsTRK RPT: Repeat the current tracks.TRK RDM: Plays tracks in random order. In which tracks this feature randomly play depends on the iPod menu you have selected.ALB RDM: Plays all tracks in the current album in random order.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
126Audio System Basic Operation*Playing a USB Flash DriveFeaturesPlaying a USB Flash DriveYour audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC format.When suing the USB flash drive, connect it to the USB adapter cable, then press the USB/AUX button.USB Adapter Cable* P. 115USB/AUX ButtonPress to select USB flash drive (if connected). / (Folder Selection) ButtonsPress to skip to the next folder, and to skip to the beginning of the previous folder. / (Skip) ButtonsPress or to change songs.Press and hold either button to fast forward or rewind within the song.SETUP ButtonPress to display available USB flash drive features. (Power) ButtonPress to turn the audio system on and off.Selector KnobTurn to adjust the volume.Press and turn to select an item, then press to set your selection.* Not available on all models%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
127Audio System Basic Operation*Playing a USB Flash DriveContinuedFeatures1. Press to display a folder list.2. Rotate to select a folder.3. Press to change the display to a list of files in that folder. If you want to start playing songs within that folder, press the button. To select a specific song, press to display the song, then rotate to select a song.4. Press or the button.■How to Select a File from a Folder with the Selector Knob (MP3/WMA/AAC)to play a selected folder or to play a selected songSelectable folderSelectable song%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
Audio System Basic Operation*Playing a USB Flash Drive128FeaturesIf the USB data you are playing is recorded with text data, it can be displayed.1. Press the SETUP button until DISP displays.2. Rotate to select the text data information you want to see. Press .You can select repeat and random when playing a track/file.1. Press the SETUP button until PMODE displays.2. Rotate to select a mode, then press .■To turn off a play mode1. Press the SETUP button until PMODE displays.2. Rotate to select OFF, then press .■How to Select a Title DisplayHow to Select a Title DisplayTitle Display Mode Menu ItemsNUMBER: Track numberFILE: File nameFOLDER: Folder nameARTIST: Artist nameALBUM: Album nameTRACK: Song nameThe display shows up to eight characters of text data.Title Display Mode■How to Select a Play ModeHow to Select a Play ModePlay Mode Menu ItemsTRK RPT: Repeats the current fileFLD RPT: Repeats all files in the current folder.FLD RDM: Plays all files in the current folder in random order.TRK RDM: Plays all files in random order.TRK SCAN: Samples all files in the current folder.FLD SCAN: Samples the first file of each folder.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
129FeaturesAudio Error MessagesiPod/USB Flash DriveIf an error occurs while playing an iPod or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.Error Message SolutionERROR Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit.CHECK MANUAL Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.NO SONG Appears when the iPod or USB flash drive is empty. Check that compatible files are stored on the device.CONNECT RETRY Appears when the system does not acknowledge the iPod or USB flash drive. Reconnect the iPod or USB flash drive.FORMATOLD VERAppears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about three seconds, then plays the next song.Appears when an unsupported iPod is connected. If it appears when a supported iPod is connected, update the iPod software to the newer version.DEVICE Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
130FeaturesGeneral Information on the Audio SystemCompatible iPod and USB Flash Drive•Use a recommended USB flash drive of 256 MB or higher.•Some digital audio players may not be compatible.•Some USB flash drives (e.g., a device with security lockout) may not work.•Some software files may not allow for audio play or text data display.•Some versions of MP3, WMA, or AAC formats may be unsupported.■iPod Model CompatibilityModeliPod (5th generation)iPod classic 80/160 GBiPod classic 120 GBiPod classic 160 GB (launch in 2009)iPod nanoiPod touch■USB Flash DrivesiPod Model CompatibilityThis system may not work with all software versions of these devices.USB Flash DrivesFiles on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.%5,2'7*7ERRN࣮࣌ࢪ㸰㸮㸯㸳ᖺ㸰᭶㸯㸱᪥ࠉ㔠᭙᪥ࠉ༗ᚋ㸱᫬㸲㸶ศ
This device complies with part 15 of FCC Rules and Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate theequipment.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency(RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operatedkeeping the radiator at least 20cm or more away from person’s body.仏）Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte lesrègles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 del’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

Navigation menu