Mitsubishi Electronics Digital Garage Door Opener Fx3U Users Manual ENET L USER'S

2015-02-09

• Front Cover
• SAFETY PRECAUTIONS
• CONTENTS
• About Manuals
• Associated Manuals
• Applicable Standard
• The Manual's Usage and Structure
• About the Generic Terms and Abbreviations
• 1 OVERVIEW
  • 1.1 Overview of the Ethernet Module
  • 1.2 Features of the Ethernet Module
  • 1.3 Software Configuration
• 2 SYSTEM CONFIGURATIONS
  • 2.1 Applicable Systems
  • 2.2 Devices Required for Network Configuration
• 3 SPECIFICATIONS
  • 3.1 Performance Specifications
  • 3.2 Data Codes for Communication
  • 3.3 Relationship between the External Devices and Additional Functions for Each Communication Function
  • 3.4 Ethernet Module Function List
  • 3.5 List of Setting Items for Ethernet Modules
  • 3.6 List of Applications and Assignments of the Buffer Memory
• 4 SETTINGS AND PROCEDURES PRIOR TO OPERATION
  • 4.1 Loading and Installation
    • 4.1.1 Handling precautions
    • 4.1.2 Installation environment
  • 4.2 Settings and Procedures Prior to Starting the Operation
  • 4.3 Components of the Ethernet Module
  • 4.4 Connecting to the Network
    • 4.4.1 Connecting to the 10BASE-T/100BASE-TX network
  • 4.5 Ethernet Module Setting
  • 4.6 Operational Settings
  • 4.7 Self-Diagnostic Tests
    • 4.7.1 Self loopback test
    • 4.7.2 Hardware test (H/W Test)
  • 4.8 Maintenance and Inspection
    • 4.8.1 Maintenance and inspection
    • 4.8.2 Installing and uninstalling the module
• 5 COMMUNICATION PROCEDURE
  • 5.1 Overview of the Communication Procedure
  • 5.2 Initial Processing
    • 5.2.1 Initial processing
    • 5.2.2 Initial settings
    • 5.2.3 Re-initialization
  • 5.3 Router Relay Parameter
  • 5.4 Confirming the Completion of the Initial Processing
    • 5.4.1 PING command (Personal computer -> Ethernet module)
    • 5.4.2 Loop back test (Communication using MC protocol)
  • 5.5 Open Settings
    • 5.5.1 Fixed buffer connection (connection No. 1 and connection No. 2)
    • 5.5.2 MELSOFT/MC protocol connections (connection No. 3 and connection No. 4)
  • 5.6 Open Processing/Close Processing of the Connection
    • 5.6.1 Active open processing/close processing
    • 5.6.2 Passive open processing/close processing
    • 5.6.3 UDP/IP open processing/close processing
  • 5.7 Pairing Open
    • 5.7.1 Pairing open
    • 5.7.2 Example of pairing open settings
  • 5.8 Hub Connection Status Monitor Function
• 6 FIXED BUFFER COMMUNICATION (WITH THE PROCEDURE EXIST CONTROL METHOD)
  • 6.1 Control Method
  • 6.2 Sending Control Method
  • 6.3 Receiving Control Method
    • 6.3.1 Receive processing with the main program
  • 6.4 Data Format
    • 6.4.1 Header
    • 6.4.2 Application data
  • 6.5 Programming
    • 6.5.1 Precautions when creating programs
    • 6.5.2 Fixed buffer communication program example (with the procedure exist control method)
• 7 FIXED BUFFER COMMUNICATION (WITH THE NO PROCEDURE CONTROL METHOD)
  • 7.1 Control Method
  • 7.2 Sending Control Method
  • 7.3 Receiving Control Method
    • 7.3.1 Receive processing with the main program
  • 7.4 Data Format
  • 7.5 Programming
    • 7.5.1 Precautions when creating programs
    • 7.5.2 Fixed buffer communication program example (with the no procedure control method)
• 8 COMMUNICATION USING MC PROTOCOL
  • 8.1 Data Communication Function
    • 8.1.1 Accessing the PLC using MC protocol
    • 8.1.2 How to Read the Control Procedures of the MC Protocol
    • 8.1.3 Access Timing on the PLC Side
    • 8.1.4 PLC setting for performing data communication
    • 8.1.5 Precautions on Data Communication
• 9 WHEN COMMUNICATING DATA USING THE MC PROTOCOL
  • 9.1 Message Formats and Control Procedures
    • 9.1.1 How to read the command reference section
    • 9.1.2 Message format and control procedure
    • 9.1.3 Contents of data designation items
    • 9.1.4 Character area transmission data
  • 9.2 List of Commands and Functions for The MC protocol
  • 9.3 Device Memory Read/Write
    • 9.3.1 Commands and device range
    • 9.3.2 Batch read in bit units (command: 00)
    • 9.3.3 Batch write in bit units (command: 02)
    • 9.3.4 Test in bit units (random write) (command: 04)
    • 9.3.5 Batch read in word units (command: 01)
    • 9.3.6 Batch write in word units (command: 03)
    • 9.3.7 Test in word units (random write) (command: 05)
  • 9.4 Remote RUN/STOP, PLC model name code read
    • 9.4.1 Commands and control contents
    • 9.4.2 Remote RUN (command: 13) / Remote STOP(Command: 14)
    • 9.4.3 PLC model name read (command: 15)
  • 9.5 Loopback Test
    • 9.5.1 Loopback test (command: 16)
• 10 USING THE E-MAIL FUNCTION
  • 10.1 E-mail Function
    • 10.1.1 E-mail send by the PLC
  • 10.2 Configuration and Environment of the Applicable System
  • 10.3 Precautions for Using the E-mail Function
  • 10.4 E-mail Specifications
  • 10.5 Processing Procedure of the E-mail Function
  • 10.6 E-mail Settings
  • 10.7 Sending E-mail (Attached Files) by the PLC
    • 10.7.1 When sending data as an attached file
    • 10.7.2 Contents of the attached files
  • 10.8 Sending E-mail (Main Text) by the PLC
    • 10.8.1 When sending data as main text of e-mail
• 11 TROUBLESHOOTING
  • 11.1 How to Check Errors Using LED Displays
    • 11.1.1 Checking error display
    • 11.1.2 How to turn off COM.ERR LED and to read/clear error information
  • 11.2 How to Check an Error Through FX Configurator-EN-L
    • 11.2.1 Buffer memory that can be monitored with the FX Configurator-EN-L diagnostic function
    • 11.2.2 Ethernet diagnostics
  • 11.3 Checking the error information by the buffer memory batch monitoring function
  • 11.4 Error Code List
    • 11.4.1 Type of error incident
    • 11.4.2 End codes (Complete codes) returned to an external device during data communication
    • 11.4.3 Abnormal codes returned during communication using MC protocol
    • 11.4.4 Error codes stored in the buffer memory
  • 11.5 Troubleshooting Flowchart
    • 11.5.1 Sending errors during fixed buffer communication (common to procedure exist and no procedure)
    • 11.5.2 Receiving errors during fixed buffer communication (common to procedure exist and no procedure)
    • 11.5.3 Errors in communication using MC protocol
    • 11.5.4 Sending errors during e-mail communication
• APPENDIX
  • Appendix 1 Processing Time
  • Appendix 2 ASCII Code List
  • Appendix 3 References
  • Appendix 4 Program Examples
    • Appendix 4.1 Program example for communication using MC protocol -1
    • Appendix 4.2 Program example for communication using MC protocol -2
  • Appendix 5 Differences between the Ethernet and the IEEE802.3
  • Appendix 6 ICMP Protocol Supported by the Ethernet Module
  • Appendix 7 Setting Value Recording Sheets
  • Appendix 8 Versioin Information
• Warranty
• Revised History
• Back Cover