Mitsubishi Electronics Digital Portable Multimedia Player Got1000 Users Manual Series Connection (Mitsubishi Products) For GT Works3 (ELE)

2015-02-09

• SAFETY PRECAUTIONS
• INTRODUCTION
• CONTENTS
• MANUALS
• QUICK REFERENCE
• ABBREVIATIONS AND GENERIC TERMS
• HOW TO READ THIS MANUAL
• 1. PREPARATORY PROCEDURES FOR MONITORING
  • 1.1 Setting the Communication Interface
    • 1.1.1 Setting connected equipment (Channel setting)
    • 1.1.2 I/F communication setting
    • 1.1.3 Precautions
  • 1.2 Writing the Project Data and OS onto the GOT
    • 1.2.1 Writing the project data and OS onto the GOT
    • 1.2.2 Checking the project data and OS writing on GOT
  • 1.3 Option Devices for the Respective Connection
    • 1.3.1 Communication module
    • 1.3.2 Option unit
    • 1.3.3 Conversion cables
    • 1.3.4 Connector conversion adapter
    • 1.3.5 Serial Multi-Drop Connection Unit
    • 1.3.6 RS-232/485 signal conversion adapter
    • 1.3.7 Installing a unit on another unit (Checking the unit installation position)
  • 1.4 Connection Cables for the Respective Connection
    • 1.4.1 GOT connector specifications
    • 1.4.2 Coaxial cable connector connection method
    • 1.4.3 Terminating resistors of GOT
    • 1.4.4 Setting the RS-232/485 signal conversion adaptor
  • 1.5 Verifying GOT Recognizes Connected Equipment
  • 1.6 Checking for Normal Monitoring
    • 1.6.1 Check on the GOT
    • 1.6.2 Confirming the communication state on the GOT side (For Ethernet connection)
    • 1.6.3 Confirming the communication state to each station (Station monitoring function)
    • 1.6.4 Check on GX Developer
    • 1.6.5 Check on GX Works2
    • 1.6.6 Check on the PLC
• MITSUBISHI PLC CONNECTIONS
• 2. DEVICE RANGE THAT CAN BE SET
  • 2.1 MELSEC-QnU/DC, Q17nD/M/NC/DR, CRnD-700
  • 2.2 MELSEC-L
  • 2.3 MELSEC-QnA/Q/QS, MELDAS C6 *
  • 2.4 MELSEC-Q (Multi)/Q Motion
  • 2.5 MELSEC-A
  • 2.6 MELSEC-FX
  • 2.7 MELSEC-WS
• 3. ACCESS RANGE FOR MONITORING
  • 3.1 Access Range for Monitoring Stations on Network Systems
    • 3.1.1 MELSECNET/H, MELSECNET/10, CC-Link IE Controller Network, CC-Link IE Field Network
  • 3.2 Access Range for Monitoring when Using Ethernet Connection
  • 3.3 CC-Link System Access Range for Monitoring
  • 3.4 Data Link System (MELSECNET/B, (II)) Access Range for Monitoring
  • 3.5 Access Range for Monitoring when Connecting FXCPU
  • 3.6 Connection to Remote I/O Station in MELSECNET/ H Network System
  • 3.7 Connection to the Head Module of CC-Link IE Field Network System
• 4. HOW TO MONITOR REDUNTANT SYSTEM
  • 4.1 Connection to Remote I/O Station in MELSECNET/ H Network System
    • 4.1.1 Direct CPU connection (Direct CPU connection to the remote I/O station)
    • 4.1.2 Computer link connection (Connection to serial communication module mounted on remote I/O station)
    • 4.1.3 Ethernet connection (Connection to Ethernet module mounted on remote I/O station)
  • 4.2 Direct CPU Connection
    • 4.2.1 When using one GOT
    • 4.2.2 When using two GOTs
    • 4.2.3 Precautions when connecting a GOT directly to a PLC CPU in the redundant system without making Q redundant setting
  • 4.3 CC-Link Connection (Intelligent Device Station)
  • 4.4 CC-Link Connection (Via G4)
  • 4.5 MELSECNET/H and MELSECNET/10 Connections (Network Systems)
  • 4.6 CC-Link IE Controller Network Connection (Network System)
  • 4.7 Ethernet Connection
  • 4.8 Connection to the Redundant Type Extension Base Unit
    • 4.8.1 Computer link connection (Connection to the Serial communication module mounted on the redundant type extension base unit)
    • 4.8.2 Ethernet connection (Connection to the Ethernet module mounted on redundant type extension base unit)
    • 4.8.3 CC-Link connection (intelligent device station) (Connection to the CC-Link module mounted on redundant type extension base unit)
    • 4.8.4 CC-Link connection (Via G4) (Connection to the CC-Link module mounted on redundant type extension base unit)
  • 4.9 Q Redundant Setting
  • 4.10 Switch the Monitor Target to the Control System Using the Script Function
    • 4.10.1 Method for using the station number switching function
    • 4.10.2 Method for using the screen changing function
• 5. BUS CONNECTION
  • 5.1 Connectable Model List
  • 5.2 System Configuration
    • 5.2.1 Connecting to QCPU
    • 5.2.2 Connecting to QnACPU or AnCPU
    • 5.2.3 Connection to QnASCPU or AnSCPU
    • 5.2.4 Connection to A0J2HCPU
    • 5.2.5 Connection to motion controller CPU (A273UCPU, A273UHCPU(-S3), A373UCPU(-S3))
    • 5.2.6 Connecting to motion controller CPU (A171SCPU(-S3(N)), A171SHCPU(N), A172SHCPU(N), A173UHCPU(-S1))
  • 5.3 GOT Side Settings
    • 5.3.1 Setting communication interface (Communication settings)
    • 5.3.2 Communication detail settings
  • 5.4 Precautions
    • 5.4.1 GT15-C [ ] EXSS-1, GT15-C [ ] BS
    • 5.4.2 Turning the GOT ON
    • 5.4.3 Powering OFF the GOT, reapplying the power (OFF to ON)
    • 5.4.4 Reset switch on GOT
    • 5.4.5 Powering OFF or resetting the PLC
    • 5.4.6 Position of the GOT
    • 5.4.7 When the GOT is bus- connected to a PLC CPU without the communication driver written
    • 5.4.8 When designing the system
    • 5.4.9 When assigning GOT I/O signals
    • 5.4.10 When connecting to a QCPU (Q mode)
    • 5.4.11 When connecting to a QnA(S)CPU or An(S)CPU type
    • 5.4.12 When connecting multiple GOTs
    • 5.4.13 When using a PLC CPU in the direct mode
    • 5.4.14 When connecting to a Q4ARCPU redundant system
    • 5.4.15 When monitoring the Q170MCPU
    • 5.4.16 Troubleshooting
• 6. DIRECT CONNECTION TO CPU
  • 6.1 Connectable Model List
  • 6.2 System Configuration
    • 6.2.1 Connecting to QCPU
    • 6.2.2 Connecting to LCPU
    • 6.2.3 Connecting to QnACPU
    • 6.2.4 Connecting to ACPU
    • 6.2.5 Connecting to FXCPU
    • 6.2.6 Connecting to WSCPU
    • 6.2.7 Connecting to the motion controller CPU
  • 6.3 Connection Diagram
    • 6.3.1 RS-232 cable
    • 6.3.2 RS-422 cable
  • 6.4 GOT Side Settings
    • 6.4.1 Setting communication interface (Communication settings)
    • 6.4.2 Communication detail settings
  • 6.5 Precautions
• 7. COMPUTER LINK CONNECTION
  • 7.1 Connectable Model List
    • 7.1.1 PLC/Motion controller CPU
    • 7.1.2 Serial communication module/Computer link module
  • 7.2 System Configuration
    • 7.2.1 Connecting to QCPU (Q mode)
    • 7.2.2 Connecting to LCPU
    • 7.2.3 Connecting to QCPU (A mode)
    • 7.2.4 Connecting to QnACPU (QnACPU type)
    • 7.2.5 Connecting to QnACPU (QnASCPU type)
    • 7.2.6 Connecting to ACPU (AnCPU type)
    • 7.2.7 Connecting to ACPU (AnSCPU type, A0J2HCPU, A2CCPUC)
  • 7.3 Connection Diagram
    • 7.3.1 RS-232 cable
    • 7.3.2 RS-422 cable
  • 7.4 GOT Side Settings
    • 7.4.1 Setting communication interface (Communication settings)
    • 7.4.2 Communication detail settings
  • 7.5 PLC Side Setting
    • 7.5.1 Connecting serial communication module (Q, L Series)
    • 7.5.2 Connecting serial communication module (QnA Series)
    • 7.5.3 Connecting computer link module
  • 7.6 Precautions
• 8. ETHERNET CONNECTION
  • 8.1 Connectable Model List
    • 8.1.1 PLC/Motion controller CPU
    • 8.1.2 Ethernet module
  • 8.2 System Configuration
    • 8.2.1 Connection to Ethernet module
    • 8.2.2 Connection to Built-in Ethernet port CPU or C Controller module
    • 8.2.3 Connecting to Display I/F
    • 8.2.4 Connection to CC-Link IE Field Network Ethernet Adapter Module
    • 8.2.5 Connecting to PERIPHERAL I/F (Built-in Ethernet port Motion Controller CPU)
  • 8.3 GOT Side Settings
    • 8.3.1 Setting communication interface (Communication settings)
    • 8.3.2 Communication detail settings
    • 8.3.3 Ethernet setting
    • 8.3.4 Routing parameter setting
  • 8.4 PLC Side Setting
    • 8.4.1 Connecting to Built-in Ethernet port CPU (one-to-one connection)
    • 8.4.2 Connecting to Built-in Ethernet port CPU (multiple connection)
    • 8.4.3 Connecting to Ethernet module (Q/L Series)
    • 8.4.4 Connecting to C Controller module
    • 8.4.5 Connecting to Ethernet module (QnA Series)
    • 8.4.6 Connecting to Ethernet module (A Series)
    • 8.4.7 Connecting to Ethernet module (FX Series)
    • 8.4.8 Connecting to Display I/F (CNC C70)
    • 8.4.9 Connecting to CC-Link IE Field Network Ethernet Adapter Module
    • 8.4.10 Connecting to PERIPHERAL I/F (Built-in Ethernet port Motion Controller CPU)
  • 8.5 Precautions
• 9. MELSECNET/H CONNECTION (PLC TO PLC NETWORK)
  • 9.1 Connectable Model List
    • 9.1.1 PLC/Motion controller CPU
    • 9.1.2 MELSECNET/H network module
  • 9.2 System Configuration
    • 9.2.1 Connecting to optical loop system
    • 9.2.2 Connecting to the coaxial bus system
  • 9.3 GOT Side Settings
    • 9.3.1 Setting communication interface (Communication settings)
    • 9.3.2 Communication detail settings
    • 9.3.3 Routing parameter setting
  • 9.4 PLC Side Settings
    • 9.4.1 System configuration
    • 9.4.2 Switch setting of MELSECNET/H network module
    • 9.4.3 Parameter setting
    • 9.4.4 [Controller Setting] of GT Designer3
  • 9.5 Precautions
• 10. MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
  • 10.1 Connectable Model List
    • 10.1.1 PLC/Motion controller CPU
    • 10.1.2 MELSECNET/H (NET/10 mode), MELSECNET/10 network module
  • 10.2 System Configuration
    • 10.2.1 Connecting to optical loop system
    • 10.2.2 Connecting to the coaxial bus system
  • 10.3 GOT Side Settings
    • 10.3.1 Setting communication interface (Communication settings)
    • 10.3.2 Communication detail settings
    • 10.3.3 Routing parameter setting
    • 10.3.4 Switch setting (Only when MELSECNET/10 communication unit is used)
  • 10.4 PLC Side Setting
    • 10.4.1 Connecting to MELSECNET/H network module
    • 10.4.2 Connecting to MELSECNET/ 10 network module (QnA Series)
    • 10.4.3 Connecting to MELSECNET/ 10 network module (A Series)
  • 10.5 Precautions
• 11. CC-Link IE CONTROLLER NETWORK CONNECTION
  • 11.1 Connectable Model List
    • 11.1.1 PLC/Motion controller CPU
    • 11.1.2 CC-Link IE Controller Network communication unit
  • 11.2 System Configuration
    • 11.2.1 Connecting to optical loop system
  • 11.3 GOT side settings
    • 11.3.1 Setting communication interface (Communication settings)
    • 11.3.2 Communication detail settings
    • 11.3.3 Routing parameter setting
  • 11.4 PLC Side Setting
  • 11.5 Precautions
• 12. CC-Link IE FIELD NETWORK CONNECTION
  • 12.1 Connectable Model List
    • 12.1.1 PLC/Motion controller CPU
    • 12.1.2 CC-Link IE Field Network communication unit
  • 12.2 System Configuration
    • 12.2.1 Connecting to CC-Link IE Field Network communication unit
  • 12.3 GOT side settings
    • 12.3.1 Setting communication interface (Communication settings)
    • 12.3.2 Communication detail settings
    • 12.3.3 Routing parameter setting
  • 12.4 PLC Side Setting
  • 12.5 Precautions
• 13. CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
  • 13.1 Connectable Model List
    • 13.1.1 PLC/Motion controller CPU
    • 13.1.2 CC-Link module
  • 13.2 System Configuration
    • 13.2.1 Connecting with CC-Link Ver.1 compatible
    • 13.2.2 Connecting with CC-Link Ver.2 compatible
    • 13.2.3 Connecting with CC-Link Ver.1/Ver.2 compatibles mixed
  • 13.3 GOT Side Settings
    • 13.3.1 Setting communication interface (Communication settings)
    • 13.3.2 Communication detail settings
    • 13.3.3 Switch setting (Only when MODEL GT15-75J61BT13-Z CC-Link communication unit is used)
  • 13.4 PLC Side Setting
    • 13.4.1 Connecting to CC-Link module (Q Series) with Ver.1 compatible
    • 13.4.2 Connecting to CC-Link module (Q Series) with Ver.2 compatible
    • 13.4.3 Connecting to CC-Link module (Q Series) with Ver.1/Ver.2 compatibles mixed
    • 13.4.4 Connecting to MELSEC-L series with CC-Link Ver.1 compatible
    • 13.4.5 Connecting to MELSEC-L series with CC-Link Ver.2 compatible
    • 13.4.6 Connecting to CC-Link module (QnA Series)
    • 13.4.7 Connecting to CC-Link module (A Series)
  • 13.5 Precautions
• 14. CC-Link CONNECTION (Via G4)
  • 14.1 Connectable Model List
    • 14.1.1 PLC/Motion controller CPU
    • 14.1.2 CC-Link module/peripheral module
  • 14.2 System Configuration
    • 14.2.1 Connecting to QCPU (Q mode)
    • 14.2.2 Connecting to LCPU
  • 14.3 Connection Diagram
    • 14.3.1 RS-232 cable
    • 14.3.2 RS-422 cable
  • 14.4 GOT Side Settings
    • 14.4.1 Setting communication interface (Communication settings)
    • 14.4.2 Communication detail settings
  • 14.5 PLC Side Settings
    • 14.5.1 Connecting AJ65BT-G4-S3
    • 14.5.2 Connecting AJ65BT-R2N
    • 14.5.3 Switch setting of CC-Link module (Q series)
    • 14.5.4 [Network parameter] of GX Developer
    • 14.5.5 Parameter setting (when connecting to C Controller module)
    • 14.5.6 [Controller Setting] of GT Designer3
  • 14.6 Precautions
• MITSUBISHI FA DEVICE CONNECTIONS
• 15. INVERTER CONNECTION
  • 15.1 Connectable Model List
  • 15.2 System Configuration
    • 15.2.1 Connecting to FREQROL-A500/A500L/F500/F500L/V500/V500L
    • 15.2.2 Connecting to FREQROL-E500/S500/S500E/F500J/D700/F700PJ
    • 15.2.3 Connecting to FREQROL E700
    • 15.2.4 Connecting to FREQROL-A700/F700/700P
    • 15.2.5 Connecting to MD-CX522-K(-A0)
  • 15.3 Connection Diagram
    • 15.3.1 RS-422 cable
  • 15.4 GOT Side Settings
    • 15.4.1 Setting communication interface (Communication settings)
    • 15.4.2 Communication detail settings
  • 15.5 FREQROL Series Inverter Side Settings
    • 15.5.1 Connecting FREQROL-S500, S500E, F500J series
    • 15.5.2 Connecting FREQROL-E500 series
    • 15.5.3 Connecting FREQROL-F500, F500L series
    • 15.5.4 Connecting FREQROL-A500, A500L series
    • 15.5.5 Connecting FREQROL-V500, V500L series
    • 15.5.6 Connecting FREQROL-E700 series
    • 15.5.7 Connecting FREQROL-D700 series
    • 15.5.8 Connecting FREQROL-F700/700P series
    • 15.5.9 Connecting FREQROL-F700PJ series
    • 15.5.10 Connecting FREQROL-A700 series
    • 15.5.11 Connecting MD-CX522-K(-A0)
    • 15.5.12 Station number setting
  • 15.6 Device Range that Can Be Set
  • 15.7 Precautions
• 16. SERVO AMPLIFIER CONNECTION
  • 16.1 Connectable Model List
  • 16.2 System Configuration
    • 16.2.1 Connecting to the MELSERVO-J2-Super Series
    • 16.2.2 Connecting to the MELSERVO-J2M Series
    • 16.2.3 Connecting to the MELSERVO-J4, J3 Series
  • 16.3 Connection Diagram
    • 16.3.1 RS-232 cable
    • 16.3.2 RS-422 cable
  • 16.4 GOT Side Settings
    • 16.4.1 Setting communication interface (Communication settings)
    • 16.4.2 Communication detail settings
  • 16.5 Setting on Servo Amplifier Side
    • 16.5.1 Connecting to the MELSERVO-J2-Super Series
    • 16.5.2 Connecting to the MELSERVO-J2M Series
    • 16.5.3 Connecting to the MELSERVO-J4,J3 Series
    • 16.5.4 Station number setting
  • 16.6 Device Range that Can Be Set
  • 16.7 Precautions
• 17. ROBOT CONTROLLER CONNECTION
  • 17.1 Connectable Model List
  • 17.2 System Configuration
    • 17.2.1 Connecting to robot controller (CRnD-700)
  • 17.3 GOT Side Settings
    • 17.3.1 Setting communication interface (Communication settings)
    • 17.3.2 Communication detail settings
    • 17.3.3 Ethernet setting
  • 17.4 PLC Side Settings
    • 17.4.1 Connecting to robot controller (CRnD-700)
  • 17.5 Device Range that Can Be Set
  • 17.6 Precautions
• 18. CNC CONNECTION
  • 18.1 Connectable Model List
  • 18.2 System Configuration
    • 18.2.1 Direct connection to CPU
    • 18.2.2 MELSECNET/10 connection (PLC to PLC network)
    • 18.2.3 CC-Link connection (intelligent device station)
    • 18.2.4 Ethernet connection
  • 18.3 Connection Diagram
    • 18.3.1 RS-232 cable
  • 18.4 GOT Side Settings
    • 18.4.1 Setting communication interface (Communication settings)
    • 18.4.2 Communication detail settings
    • 18.4.3 Ethernet setting
    • 18.4.4 Switch setting
  • 18.5 CNC Side Settings
    • 18.5.1 MELSECNET/10 connection
    • 18.5.2 CC-Link (ID) connection
    • 18.5.3 Ethernet connection
  • 18.6 Device Range that Can Be Set
  • 18.7 Precautions
    • 18.7.1 Direct connection to CPU
    • 18.7.2 MELSECNET/10 connection
    • 18.7.3 CC-Link (ID) connection
    • 18.7.4 Ethernet connection
• MULTIPLE GOT CONNECTIONS
• 19. GOT MULTI-DROP CONNECTION
  • 19.1 CPU that can be Monitored
  • 19.2 Connectable Model List
  • 19.3 System Configuration
  • 19.4 Connection Diagram
    • 19.4.1 RS-485 cable
  • 19.5 GOT Side Settings
    • 19.5.1 Setting communication interface (communication settings)
    • 19.5.2 Communication detail settings
  • 19.6 Setting of Serial Multi-Drop Connection Unit
    • 19.6.1 Write the OS
    • 19.6.2 Setting communication interface (Communication settings)
    • 19.6.3 Setting switches
  • 19.7 Setting of connection conversion adapter
    • 19.7.1 Setting switches
  • 19.8 Precautions
• 20. MULTIPLE-GT14, GT12, GT11, GT10 CONNECTION FUNCTION
  • 20.1 Connectable Model List
  • 20.2 System Configuration
    • 20.2.1 Connecting the GOT to PLC via RS-232 interface
    • 20.2.2 Connecting the GOT to PLC via RS-422 interface
  • 20.3 Connection Diagram
    • 20.3.1 RS-232 Cable
    • 20.3.2 RS-422 cable
  • 20.4 GOT Side Settings
    • 20.4.1 Setting communication interface (Communication settings)
    • 20.4.2 Communication detail settings
  • 20.5 Precautions
• MULTI-CHANNEL FUNCTION
• 21. MULTI-CHANNEL FUNCTION
  • 21.1 What is Multi-channel Function?
  • 21.2 System Configuration
    • 21.2.1 Bus connection and serial connection
    • 21.2.2 Ethernet multiple connection
  • 21.3 GOT Side Settings
    • 21.3.1 Basics of interface selection
    • 21.3.2 General flow from system selection to drawing
    • 21.3.3 Determining the connection type and channel No. (System selection)
    • 21.3.4 Determining the GOT side interface (Interface selection)
    • 21.3.5 Setting for communication settings
    • 21.3.6 Items to be checked before starting drawing
  • 21.4 Precautions
    • 21.4.1 Precautions for hardware
    • 21.4.2 Precautions for use
  • 21.5 Multi-channel Function Check Sheet
• FA TRANSPARENT FUNCTION
• 22. FA TRANSPARENT FUNCTION
  • 22.1 FA Transparent Function
  • 22.2 Compatible Software
  • 22.3 List of Models that Can Be Monitored
  • 22.4 System Configuration
    • 22.4.1 GX Developer, GX Works2, GX LogViewer, MX Component, MX Sheet, LCPU Logging Configuration Tool, Setting/Monitoring tool for C Controller module
    • 22.4.2 PX Developer, GX Configurator
    • 22.4.3 MT Developer, MT Works2
    • 22.4.4 MR Configurator, MR Configurator2
    • 22.4.5 FR Configurator
    • 22.4.6 FX Configurator-FP, FX Configurator-EN
    • 22.4.7 RT ToolBox2
    • 22.4.8 NC Configurator
  • 22.5 GOT Side Settings
    • 22.5.1 Setting communication interface
  • 22.6 Personal Computer Side Setting
    • 22.6.1 Accessing the PLC by the GX Developer, PX Developer, GX Configurator
    • 22.6.2 Accessing by GX Works2
    • 22.6.3 Accessing by GX LogViewer
    • 22.6.4 Accessing PLC by GX Configurator-QP
    • 22.6.5 Accessing by the MT Developer
    • 22.6.6 Accessing by the MT Works2
    • 22.6.7 Accessing the servo amplifier by the MR Configurator
    • 22.6.8 Accessing the servo amplifier by the MR Configurator2
    • 22.6.9 Accessing the inverter by the FR Configurator
    • 22.6.10 Accessing PLC by FX Configurator-FP
    • 22.6.11 Accessing by FX Configurator- EN
    • 22.6.12 Accessing by RT ToolBox2
    • 22.6.13 Accessing by NC Configurator
    • 22.6.14 Accessing by MELSOFT Navigator
    • 22.6.15 Accessing by LCPU Logging Configuration Tool
    • 22.6.16 Accessing by Setting/ Monitoring tool for C Controller module
  • 22.7 Precautions
    • 22.7.1 Precautions common to each software
    • 22.7.2 When using GX Developer, GX Woks2
    • 22.7.3 When using MT Developer, MT Works2
    • 22.7.4 When using MR Configurator, MR Configurator2
    • 22.7.5 When using FR Configurator
• INDEX
• REVISIONS
• WARRANTY
• INDEX MENU