Mitsubishi 6A1 Users Manual ENGINE Workshop 6A1(E W)

2015-01-24

• 11A ENGINE <6A1>
  • GENERAL INFORMATION
  • 1. SPECIFICATIONS
    • SERVICE SPECIFICATIONS
    • REWORK DIMENSIONS
    • TORQUE SPECIFICATION
    • NEW TIGHTENING METHOD - BY USE OF BOLTS TO BE TIGHTENED IN PLASTIC AREA
    • SEALANTS
    • FORM-IN-PLACE GASKET (FIPG)
  • 2. SPECIAL TOOLS
  • 3. DRIVE BELT
  • 4. TIMING BELT
  • 5. FUEL AND EMISSION CONTROL PARTS
  • 6. IGNITION SYSTEM
  • 7. WATER PUMP AND WATER PIPE
  • 8. INTAKE MANIFOLD AND EXHAUST MANIFOLD
  • 9. ROCKER ARM AND CAMSHAFT <SOHC>
  • 10. ROCKER COVER AND CAMSHAFT <MIVEC>
  • 11. ROCKER ARM AND ROCKER SHAFT CAP <MIVEC>
  • 12. CYLINDER HEAD AND VALVES
  • 13. OIL PUMP CASE AND OIL PAN
  • 14. PISTON AND CONNECTING ROD
  • 15. CRANKSHAFT, CYLINDER BLOCK, FLYWHEEL AND DRIVE PLATE
  • Service bulletins
    • MSB-01E11-001