Mitsubishi Trium 110 Operation Manual

Trium 110 - Operations Manual trium110_EN Free User Guide for Mitsubishi Mobile Phone, Manual

2015-07-27

: Mitsubishi Mitsubishi-Trium-110-Operation-Manual-776314 mitsubishi-trium-110-operation-manual-776314 mitsubishi pdf

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

english
This guide describes the operation of the dual band GSM telephones
Trium 110.
Edition 1, 2002.
© Mitsubishi Electric Telecom Europe, 2002
Whilst every effort has been made to ensure the accuracy of the instructions contained in this
guide, Mitsubishi Electric reserves the right to make improvements and changes to the product
described in this guide and/or to the guide itself, without prior notice.

Table of contents
1. Introduction ................. 3

4. The menu .................... 20

SAR ......................................
General safety ......................
Vehicle safety .......................
Emergency calls ...................
Care and maintenance .........
AC/DC adaptor chargers ......
Battery use ...........................
Your responsibility ...............
Security codes ......................
Disposing of waste
packaging .........................
The phone at a glance .........
Graphic display ....................
Understanding the icons ......

Access to the menus ..........
Menu map .........................
Entering text ......................
Network services ................
Phone book .......................
Messages (SMS) .................
EMS ..................................
Calls & Times .....................
Settings - customising
your phone .....................
Using the office tools ........
Games ...............................
Currency-converter ............
Internet/Wireless
Application Protocol
(WAP™) ...........................
GSM man machine
interface codes ................

3
4
4
5
5
6
6
6
6
7
8
9
9

2. Getting started .......... 10
Preparing to make your
first call ...........................
Making your first call .........
Battery ...............................
SIM card ............................

10
10
12
14

3. Using your phone ...... 15
Standby display .................
Important icons .................
Dialling from memory ........
Last dialled numbers ..........
Speed dialling ....................
Silent and vibrate alert
modes .............................
Hands free features ...........
Muting ...............................
Volume adjustment ...........
Sending DTMF tones ..........
Pause feature .....................
Holding and retrieving a
call ..................................

15
15
16
16
16
17
17
17
17
17
18
18

20
20
20
22
22
26
29
29
32
44
46
47

47
50

5. Accessories ................. 51
Using the headset .............. 51

6. Appendix .................... 52
Glossary ............................. 52
Trouble shooting ............... 53
Error messages .................. 54

7. Declaration of
compliance ................. 58

Thank you for purchasing the Trium 110
dual band mobile telephone. The phone
version you have bought is either the
Trium 110, the Trium 110 m or the Trium 110 p. Please check the version on
the box label. The mobile telephone described in this guide is approved for use
on all GSM 900/1800 networks. Some
services and messages may be different
according to your subscription type
and/or service provider.
As with all types of radio transceivers
this mobile telephone emits electromagnetic waves and conforms to international regulations when it is used
under normal conditions and in accordance with the safety and warning messages given below and on page 4.

SAR
THIS TRIUM 110, TRIUM 110 m OR TRIUM 110 p PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Before a mobile phone is available for
sale to the public, compliance with the
European R&TTE directive (1999/5/CE)
must be shown. This directive includes
as one essential requirement the protection of the health and the safety for
the user and any other person.
Your mobile phone is a radio transmitter
and receiver. It is designed and manufactured not to exceed the limits for exposure to radiofrequency (RF) energy
recommended by The Council of the European Union1. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the
general population. The guidelines were

1. European recommendation 1999/519/CE

developed by independent scientific organisations through periodic and thorough evaluation of scientific studies. The
limits include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile
phones (CENELEC standard EN 50360:
2000) employs a unit of measurement
known as the Specific Absorption Rate,
or SAR. The SAR limit2 recommended by
The Council of the European Union is
2.0 W/kg. Tests for SAR have been conducted using standard operating positions (with reference to CENELEC
standard EN 50361: 2000) with the
phone transmitting at its highest certified power level in all tested frequency
bands3. Although the SAR is determined
at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum
value. This is because the phone is designed to operate at multiple power levels so as to use only the power required
to reach the network. In general, the
closer you are to a base station antenna,
the lower the power output.
The highest SAR value for this Trium
110, Trium 110 m or Trium 110 p model
when tested for compliance against the
standard was 0.746 W/kg. While there
may be differences between the SAR
levels of various phones and at various
positions, they all meet the EU requirements for RF exposure.

Introduction

2. The SAR limit for mobile phones used by the

public is 2.0 watts/kilogram (W/kg) averaged
over ten grams of tissue. The limit incorporates a substantial margin of safety to give
additional protection for the public and to
account for any variations in measurements
3. The maximum level of GSM emitted power is
250mW at 900 MHz and 125 mW at
1800 MHz according to the GSM standard.

There are a number of independent
sources of information available to users including:
Royal Society of Canada: www.rsc.ca
The International Commission on NonIonizing Radiation Protection (ICNIRP):
www.icnirp.de
The US Food and Drug Administration:
www.fda.gov/cdrh/ocd/mobilphone.html
The World Health Organization:
www.who.int/emf
Mitsubishi Electric belongs to the MMF,
an international association of radio
equipment manufacturers.
The MMF produces information such as
this in accordance with its purpose of
developing and presenting industry positions to independent research organisations, government and other research
bodies.
Mobile Manufacturers Forum
Diamant Building, 80 Blvd. A. Reyers
B-1030 Brussels Belgium
www.mmfai.org

General safety
It is important to follow any special regulations regarding the use of radio
equipment, due to the possibility of radio frequency, interference.
Please follow the safety advice given below.
Switch off phone and remove
the battery when in an aircraft.
The use of mobile telephones in
an aircraft may endanger the
operation of the aircraft, disrupt
the cellular mobile phone network and is illegal. Failure to observe this instruction may lead
to suspension or denial of mobile telephone services to the offender, or legal action, or both.
4

Switch off phone when at any
refuelling point or near inflammable material.
Switch off phone in hospitals
and any other place where medical equipment may be in use.
Respect restrictions on the use
of radio equipment in fuel depots, chemical plants or where
blasting operations are in
progress.
There may be a hazard associated with the operation of phones
close to inadequately protected
personal medical devices such as
hearing aids and pacemakers.
Consult your doctor or the manufacturers of the medical device
to determine if it is adequately
protected.
Operation of phone close to other electronic equipment may
also cause interference if the
equipment is inadequately protected. Observe any warning
signs and manufacturers recommendations.

Vehicle safety
Respect national regulations on the use
of mobile telephones in vehicles.
Road safety always comes first! Always
give your full attention to driving.
• Do not use a hand-held phone while
driving. If you do not have a ‘hands
free’ car kit, stop and park your vehicle safely before using your phone.
• If equipped with a correctly installed
vehicle kit allowing ‘hands free’ operation and you need to make or
receive a call, ensure that it is done
sensibly and safely. Use pre-programmed numbers where possible
and keep calls short and routine.

Emergency calls
In Europe, provided the phone has GSM
service, emergency calls can be made
using the European standard emergency number, 112, even if you do not
have a SIM in the phone. Emergency
calls can even be made if the phone is
PIN or electronically locked or call
barred. In some countries local emergency numbers can still be used for
emergency purposes but the phone
may have to contain a valid SIM card.
When making an emergency call remember to give all the necessary information as accurately as possible. The
phone may be the only means of communication at the scene of an emergency therefore do not cut off the call until
told to do so.
Mobile phones rely on wireless and landline networks which cannot be guaranteed in all conditions. Therefore you should never rely solely on
wireless phones for essential emergency communications.

Care and maintenance
This mobile telephone is the product of
advanced engineering, design and
craftsmanship and should be treated
with care. The suggestions below can
help you to enjoy this product for many
years.
• Do not expose the phone to any
extreme environment where the temperature or humidity is high.
• Do not expose or store in cold temperatures. When the phone warms up
after switch on, to its normal temperature, moisture can form inside which
can damage the electrical parts.
• Do not attempt to disassemble the
phone. There are no user serviceable
parts inside.
• Do not expose the phone to water,
rain or spilt beverages. It is not
waterproof.
• Do not abuse this phone by dropping, knocking or violent shaking.
Rough handling can damage it.
• Do not clean the phone with strong
chemicals or solvents. Wipe it only
with a soft, slightly dampened cloth.
• Do not place the telephone alongside
computer discs, credit or travel cards
or other magnetic media. The information contained on discs or cards
may be affected by the phone.
• Do not connect incompatible products. The use of third party equipment or accessories, not made or
authorised by Mitsubishi Electric,
invalidates the warranty of your
phone and can be a safety risk.
• Do not remove the labels. The numbers on it are important for aftersale
service and other related purposes.
• Do contact an authorised service centre in the unlikely event of a fault.

Introduction

• If incorrectly installed in a vehicle the
operation of mobile telephones can
interfere with the correct operation
of the vehicle electronics, such as
ABS anti-lock brakes or air bags. To
avoid such problems ensure that only
qualified personnel carry out the
installation. Verification of the protection and operation of the vehicle
electronics should form part of the
installation. If in doubt consult the
manufacturer.
• Do not place the phone on the passenger seat or where it could break
loose during sudden breaking or a
collision. Always use the holder.
• The use of an alert device to operate
a vehicle's lights or horn on public
roads is not permitted.

AC/DC adaptor chargers
This apparatus is intended for use only
when supplied with power from AC/DC
adaptor
chargers
(FZ14130070,
FZ14130060,
FZ14130050,
FZ14130080,
FZ14130090
or
FZ14130100). Use of any other charger
or adaptors will invalidate any approval
given to this apparatus and may be
dangerous.

Battery use
You can charge a battery hundreds of
times but gradually it wears out. When
the operating time (stand-by and talk
time) is noticeably shorter than normal
it is time to buy a new battery.
• Do not leave batteries connected to a
charger longer than necessary. Overcharging shortens battery life.
• Disconnect battery chargers from the
power source when not in use.
• Do not expose batteries to high temperatures or humidity.
• Do not dispose of the batteries in
fire. They can explode.
• Avoid putting the batteries into contact with metal objects which can
short circuit the battery terminals
(e.g. keys, paper clips, coins, chains
etc.).
• Do not drop or subject the batteries
to strong physical shocks.
• Do not try to disassemble any of the
battery packs.
• Use only the recommended battery
chargers (see page 6).
• If the battery terminals become
soiled, clean them with a soft cloth.
• It is normal for batteries to become
warm during charging.

Battery disposal
In compliance with European environmental protection directives, used
batteries must be returned to the
place of sale, where they are collected
free of charge.
Don't throw away your batteries in
your household waste.

Your responsibility
This GSM mobile telephone is your responsibility. Please treat it with care respecting all local regulations. It is not a
toy; please keep it in a safe place at all
times and out of the reach of children.
Become familiar with and use the security features to block unauthorised use
if your phone and/or SIM card are lost
or stolen. Call your service provider immediately to prevent illegal use.
When not in use lock, turn off the
phone and remove the battery.

Security codes
The phone and SIM card are delivered
to you pre-programmed with codes
that protect the phone and SIM card
against unauthorised use. A short description of each follows. See page 36
to change your PIN and phonelock
codes.

PIN and PIN2 codes (4-8 digits)
All SIM cards have a PIN (Personal
Identity Number). It protects the
card against unauthorised use.
Some SIM cards also have a PIN2
code that protects specific features
such as fixed dialling numbers.
Entering the wrong PIN code three
times in succession disables the SIM
card and the message SIM Blocked.
Enter PUK: appears. To unblock the
SIM you need the PUK (PIN Unblock

Key) code, obtainable only from
your service provider.
Obtain the PUK code from your
service provider. Use it to unblock a
disabled SIM card (see page 37).
The PUK2 code is required to unblock the PIN2 code (see above).

Call barring password (4 digits)
This password is used to bar various
types of calls, made or received,
from the phone (see page 42).

Introduction

PUK and PUK2 codes (8 digits)

Phonelock code (4 digits)
This code is set to all zeros on delivery. You can change it. Once
changed it cannot be identified by
the manufacturer over the phone.
Please refer to page 36 for more details.
You must remember and make yourself
familiar with the purpose and operation
of these codes.

Disposing of waste packaging
The packaging used for this phone is
made of recyclable materials and as
such should be disposed of in accordance with your national legislation on
the protection of the environment.
Please take care to separate the cardboard and plastic elements and to dispose of them in the correct manner.

The phone at a glance
Programmable
softkeys ( )
The function of
the softkey appears
in the graphic
display above the key.

Earpiece

Telephone
numbers, menus,
messages, etc. are
displayed here.

Cursor key
Navigates
around the
memories and
menus.
on the cursor
key: press to scroll
up menus (while in
the menu). In stand-by,
press to access the
volume control.
on the cursor key.
Press to scroll down
menus (while in the
menu). In stand-by,
press to access the
alert mode (ring, silent,
vibrate, etc.)
on the cursor key.
Press to access the
main menu or select a
menu option.
on the cursor key.

On/Off, END key
( ). Hold down to
turn the phone on/off.
Press to end a call or
return to stand-by.
Alphanumeric keys,
,
,
.
To enter numbers,
characters and
punctuation marks.
Press and hold
to
call the voice mail
number. Press and
hold
to
keys to
dial preferred
numbers. Press and
hold
to enter
international code +
prefix, 'P' symbol or '_'
underscore wildcard. .
Press and hold
to
activate the keypad
lock feature.

Press to access
the phone book or
return to the

Battery cover
(at the back of
the phone)
See page 10
for further
details.

previous display.
Call/SEND key ( ).
Press to make/answer a
call. In stand-by, press
to display the last
dialled numbers list.

Graphic display

Headset, accessories
and AC/DC charger
socket

Microphone

The display shows
icons,
alphabet
characters, numbers, menu list
and instructions
to the user. Use
the cursor keys to navigate to the
phone book, Internet/WAP™ and the
menu. The rest of this guide gives you
the procedures to access these functions. Icons in the display are described
on page 9.

Understanding the icons
Icons in the display have the following
meaning:
SIM memory in use
Phone memory in use.
When you enter a name and address you can choose the icon you
want to go with them.
Roaming. Displayed when the
phone is logged on to a network
different from its home network.
Short message service (SMS). Displayed when you have one or
more messages to read. It flashes
when the SMS message bank is
full and cannot store new messages. Delete one or more old messages to make space. The
availability of this feature is network dependent.
This icon will also be displayed if
you receive an EMS on Trium 110
m.
Unanswered call. Displayed when
an incoming call is unanswered.

Arrow keys. Displayed during
menu operation to indicate that
more items in the menu can be
displayed if
or
are pressed.
Voice mail. Displayed when you
have a voice mail message to
read.
The availability of this feature is
network dependent.
Battery level indicator. Permanently displayed to indicate the
current charge level of the battery. Three levels are shown.
low,
medium,
full. It flashes
when the battery is almost
empty.

Introduction

Graphic display

Line 2. Indicates the second line is
in use.
The availability of this feature is
network dependent.
Signal strength level. It indicates
the strength of the received signal. The more bars the stronger
the signal. If no network is available the display remains blank.
Keypad lock. Indicates whether
keypad lock is on or off.
Alarm clock icon.
Vibrator alert icon.
Ring tone off. All tones are off.
Mute icon.
Predictive text mode icon.
WAP™ 'live' connection icon.
WAP™ 'live' connection in security
mode icon.
Auto-switch function activated
icon.
9

Getting started

In order to become familiar with the
phone quickly, follow these simple
steps.

Preparing to make your first
call
Inserting the SIM card
Unpack the phone and insert the
SIM card into the holder, as shown
below, with the gold contacts facing down.

Placing the battery cover
Place the battery cover as shown
below.

Fitting the battery
Connect the battery as shown below.

Making your first call
If there is not enough charge in the battery to
power the phone, follow the instructions for battery
charging on page 13.

Turning on the phone
1 Press and hold down

for
two seconds. If this is the first
time you use the phone or
you remove and

See page 35 to change your PIN and lock codes!
Stand-by display

From the stand-by display:
Press...

to...

enter phone menu.
directly access to numbers
stored in phone books.
access volume control.
access alert tones.
access the last dialled
numbers list.
stop the dialling or end a
call.
enter numbers in the display (see also "Speed dialling", page 16).

See page 37 to set the time and
date.

Holding your phone
How to hold
the phone

Getting started

replace the battery, the
phone prompts you for the
date and time.
If you insert the SIM card
incorrectly, the error message
Check SIM! appears. Remove
the cover and battery and
make sure the SIM is inserted
with the gold contacts facing
down.
2 If the mobile is locked, Code:
appears.
Enter the 4 digit phonelock
code and press OK . The
default is 4 zeros, e.g. 0000.
3 If your SIM is PIN protected,
Enter PIN: appears.
Enter the PIN code and press
OK . An animated screen
icon appears, then the standby display.

Avoid
covering
the upper
back half of
the phone so as
to allow maximum emission
and reception
quality.
Please be warned that you should not, when using
the hands free mode, put the phone to your ear.

Making a call
The phone can make and receive
calls only when it is switched on,
unlocked (see page 15), has a valid
SIM card inserted and has GSM network service coverage. If the phone
cannot find a valid network the display remains blank.
1 Enter the desired telephone
number using the numeric keys
(
). You can enter a maximum of 46 digits. Correct any
mistakes by pressing Clear .
Hold down this key or press
to clear the whole display.

2 To dial (send) the number press
.

The phone rings and the call connects like a normal telephone. A call
timer appears.
You can prefix international calls with 00 or +. To
enter the + symbol before a number press and
hold down .
You can also get the following messages if the call does not connect or
you use the second line:
Your phone
displays...

if the...

called party is engaged.
number dialled is
Not allowed
not authorised by
(fixed dialthe FDN list (see
ling)
page 25).
call is made using
the second line
(see page 32).
Busy

If the dialled number matches one
stored in the phone book then the
name of the called person appears
in the display.

Receiving a call
The phone rings (or vibrates, see
page 32 to set) when it receives a
call. See page 33 to set the incoming ring tone. See page 34 to set the
backlight.
Answering the call
Press .
If the ring tone volume is set to zero (off) or if the
phone has been set to 'Vibrate' mode, no sound is
heard.
No ring
Pressing No ring
stops the
sound of the ring tone, which allows you to, for example, go out
of a room before pressing .
12

Service number presentation
If you have the service number
presentation your phone displays
the following information.
Your phone displays...
Unknown number,
then Call1 when

connected
the caller’s number
Withheld number,
then Call1 when

if the
number
is...

unavailable.
available
but not in
phone
books.
withheld.

connected
If you have a second line,
appears when the call has been received on your line 2 number (see
page 18 for details).
Rejecting the call
To reject, or return a busy signal
to the caller:
Press .

Ending a call
Press . The call timer stops and
disappears.
Waiting a few seconds or pressing the Exit softkey
returns the phone to the stand-by display.
The phone stores the caller's
number, if available, in the received
calls log (see page 29).

Turning off the phone
Press and hold down

The mobile turns off.

Battery
Low battery warning
When the battery power falls to its
lowest level the message Low Battery! appears and a low battery

Disconnecting the charger
At the end of charging, disconnect
the charger from the phone (see below), switch off and remove the
plug from the mains.

Getting started

warning tone sounds.
If you are on a call, terminate the
call and turn off the phone by
pressing and holding down .
Recharge the battery as shown below or swap it for a charged one.
Do not turn off the phone by
removing the battery, data can
be lost.

Charging the battery
To ensure a long life for your battery, re-charge it only when the
Low Battery! warning appears and
the 'low battery' tone is heard.
Connect the charger to the phone
as shown.

Typical charging times using the
AC/DC adaptors (FZ14130070,
FZ14130060, FZ14130050,
FZ14130080, FZ14130090 or
FZ14130100)
Battery type

While inserting the plug in the phone AC/DC
connector, make sure the Trium logo (
)
appears on top.
Plug the charger into the wall socket and turn on the mains. The battery starts to charge. The phone can
be used while charging but this increases the charging time.

Standard
battery
(FZ14240010)

Typical charging time

2 hours 10
minutes

Removing the battery
Remove the battery as shown blow.

Charging indicators when the mobile is off:
During charging Charging... appears. When charging is finished,
Battery full appears.
It is normal for the battery to get
warm during charging.
Charging indicators when the mobile is on:
During charging the
icon flashes
1-2-3 bars continuously. When
charging completes the battery indicator shows three solid bars.
13

SIM card
Inserting the SIM card
Please refer to page 10.

Removing the SIM card
Remove the SIM card as shown below.

Using your phone

For turning on/off the mobile and making/receiving calls, see pages 10 to 12.
Please note that all setting instructions
described in this user guide are to be
followed from the idle screen.

Backlight operation
The backlight is normally off. When
a key is pressed the display and keypad backlight turns on for 10 seconds. If an incoming call is received
the backlight turns on and remains
on for 10 seconds after the call is
answered.

Standby display
Keypad lock
To prevent accidental operation of
the phone, turn on keypad lock.
You can still answer calls by pressing
. When you end a call, the
keypad lock reactivates automatically.
To turn keypad lock on:
Press and hold down .
appears.
To turn keypad lock off:
Press Unlock
plus
or press
and hold .
You can also use the menu:
1 Press . Select Settings.
2 Select Phone settings. Select
Keypad lock to turn keypad
lock on.
plus
to
3 Press Unlock
turn keypad lock off or press
and hold .

Internet/Wireless Application Protocol (WAP™)
Press Internet
in the stand-by
display to access the internet main
menu and access your home page
or any WAP™ portal. You can configure up to 5 WAP™ profiles and
10 bookmarks. See page 47 for
more information.

Using your phone

Pre-programmed softkeys can be accessed from
the stand-by display. These can be for instance
Internet/Wap or SMS. The softkeys may be programmable according to your servce provider.

Important icons
•

is displayed when you do not
answer one or more calls. Press
Read
to view the callers' numbers
if available and the date and time the
call was received. Press
to call the
number. The phone stores unanswered call numbers in the unanswered calls log (see page 29 for
details).
• appears when you receive one or
several voice messages. Press Read
to view the message or press
to speed dial your voice mail message centre (see pages 9 and 35 for
more details).
• appears when you receive one or
several SMS messages. Press Read
to view the SMS inbox message.
If
flashes, your inbox is full. Delete
one or more old messages to make
space for one or more new messages
(see page 26 for more details).
The display shows the number and type
of messages:

Messages (SMS)
Press SMS
in the stand-by display to access the short messages
menu. You can also access it from
the main menu. See page 26 for
more details.
15

bers dialled, the last 10 unanswered
call numbers (if available) and the
last 10 received answered numbers.
1 Press . Select Calls & Times.
2 Select Calls log.
3 Select Last dial, Unanswered or Received.
4 Use or to scroll to the
number required.
5 Press
to dial the number.
See page 29.
Press Read
to select the type of message you want to read. Press Select
or to view the message.
When one indicator is displayed the date is temporarily cleared. When two or three indicators are
displayed both the time and date are temporarily
cleared.

Dialling from memory
You can dial any number stored in the
SIM, or the phone memory. To do this:

from the phone book
1 Press to enter the phone

book list.
2 Use or to scroll to the
required name or type the
first letter of the required
name and use or if necessary.
3 Press .
In case of a SIM memory
contact or of a phone
memory contact with one
number assigned, the
phone dials the number.In
case of a phone memory
contact with many numbers assigned, use or
to scroll to the number
required and press . The
phone dials the number.
See page 22.

from the calls log memory list
The phone stores the last 10 num16

Last dialled numbers
Quick access to the last 10 dialled numbers can also be obtained by
pressing .
1 In the stand-by mode pressing
displays a list of the
last dialled numbers.
2 Use or to scroll to the
number required.
3 Press
to dial the number.
The phone stores the last dialled numbers in the
phone memory, not in the SIM.

Speed dialling
You can assign any key to any telephone number stored in the SIM and
phone memory. To dial such a number:
Press and hold down the key ( ). The number appears and
attempts to connect.
By default,
is always allocated to
the voice mail number (see
page 38). See page 35 to allocate
numbers to the speed dialling keys.

International Country Codes
Your phone allows quick access to
pre-programmed
International
Country Codes
1 Press and hold the '+' key
until the '+' symbol is displayed.
2 Select Codes to display the
list of countries.

Silent and vibrate alert modes
To avoid disturbing others you can silence the incoming ring and alert tones.

Turning on
1 Press .
2 Select Silent, Vibrate or
Vibrate then Ring.

is displayed when the silent
alert mode feature is activated.
is displayed when the Vibrate or
Vibrate then Ring features are
activated.

Turning off
1 Press .
2 Select Ring or Vibrate &

Ring.
If the ring tone volume is set to 0 a warning message appears in the display.

Hands free features
When you want to share your call with
an audience, or you are in your car, use
the “hands free” feature.

Turning the hands free feature on
When making a call:
Press Speak.on
to turn the
hands free feature on during the
calling process.
When receiving a call:
Press Speak.on
to accept the
incoming call.

Turning the hands free feature off
Press Speak.off

Muting
You can mute the microphone during a
call, e.g. when you want to talk to
someone nearby without the person on
the phone hearing.

Turning the microphone off
1 Press Options .
2 Select Mute and select Yes. A
warning message appears in
the display.
also appears.

Using your phone

and
and select one
3 Use
of the countries. The '+' symbol and the country code (e.g
+31 for the Netherlands) are
displayed. It is then possible
to enter the phone number
and store it into one of the
phonebooks (Phone names /
SIM names) or delete it.

Turning the microphone on
1 Press Options .
2 Select Unmute. A warning

message appears in the display.
disappears.
A new call restores the microphone to on.

Volume adjustment
To adjust the volume:
1 Use or to increase or
decrease the volume and
press OK .
or wait 2 sec2 Press Exit
onds to return to the previous
display.
See also page 33.

Sending DTMF tones
Some remote access services require
DTMF tones. These tones are used by
regular telephones when you dial and
when you answer questions from an
automated voice service. If you are in a
conversation and manually entering the
numbers, no extra configuration is necessary. If, however, you want to send a
number stored in memory, you must set
DTMF to automatic.

Manually
To send individual DTMF tones directly from the keypad during a
conversation:
Press the required keys.
The tones are heard in the ear17

piece and sent immediately.

Automatically
To send a consecutive string of
DTMF tones during a conversation:
1 Press Options .
2 Select Auto DTMF.
3 Enter the DTMF numbers into
the display either directly
using the keypad or from a
number stored in the phone
book (under Names ).
4 Press OK . The phone sends
the tones and then shows the
normal conversation display.
DTMF tones cannot be sent when a call is on hold.

Pause feature
You can enter and store telephone
numbers and a sequence of DTMF tones
together as long as you separate them
by a 'pause'. To enter a pause between
numbers, press and hold down . The
letter p appears. The phone can store
several pauses together for a maximum
of 20-46 characters (dependent upon
the SIM and the phone memory capacity).

Holding and retrieving a call
To put a call on hold during a conversation:
Press .
To retrieve a call:
Press .
To make a second call when one call
is on hold:
1 Enter a number in the display.
Press
to dial the number.
2 After the second call has been
established press
to swap
between the two calls.

3 To end either the current call
or the held call select End
active or End held in the
Options menu. The remaining call is automatically
retrieved
4 Press
to end the remaining
call.
Both calls can be ended at the same time by pressing .
Alternatively, use Options
to
display a menu of the actions described above. Scroll to the required option and press Select
or (see also Multi-party or conference calls (network dependent),
page 19).Call
waiting,
swapping and multi-party conference calls

Call waiting (network dependent)
Use call waiting, a network feature,
to receive a second incoming call
when already engaged in a call. This
puts an existing call 'on hold' while
you answer or make a second call.
To turn the call waiting service on
or off:
1 Press . Select Settings.
Select GSM Services.
2 Select Call waiting.
3 Select Activate or Cancel.
The network confirms your
request. The confirmation can
take several seconds.
4 Press and hold Exit
or
to return to the standby display.

You hear a 'double beep' when your
phone receives a second call. An animated phone icon and the telephone number (if available) also
appear.
To accept the second call
Press . This answers the second
call and puts the first call on hold.
To reject the second call:
Press Reject . This returns a
busy signal to the second caller.
To swap between the two connected calls:
Press .

Multi-party or conference calls (network dependent)
Use this feature to make or receive
between 2 to 5 calls at the same
time with all parties being able to
hear and talk with each other.
1 Make and establish a call in
the normal way and press .
2 Enter another number into
the display and press . The
first call is put on hold when
the second call becomes
active.
3 Press Options
for the following menu:

Option
Auto
DTMF

Description
to enter a DTMF string
to the active call only
Swaps between active
Swap
and call on hold
Joins active and call on
Join
hold to make a multiparty or conference call
Mute/
Turns on or off the miUnmute crophone
End held Ends the call on hold
Ends the active call and
End acconnects with the call
tive
on hold
End all
Ends all the calls
Allows you to select
and have a private con* Private versation with one of
with
the conference callers
while putting all the
other calls on hold
Hold/Re- Holds or retrieves the
trieve
conference call
Allows you to select
and end one of the
* End one
conference call participants

Using your phone

Action when receiving a second call

* These items in the Options menu
appear if more than 2 calls are
joined in the conference call.
Throughout the conference call the
display shows the actions you selected from the options menu.
For alternate line service (ALS), you cannot make
subscribers conference calls between Line 1 and
Line 2.

The menu

Use the round cursor key to access the
menu system. Your menu options can
vary. Some may not appear. This depends on your network operator and
your subscription, plus on the phone
version you have (check on box label).

Phone Book

Recall
Store
Remaining
Own numbers
Fixed dialling
Phone Book tones
SMS*

Inbox
Outbox
Write new
Settings
Draft texts
Alert
Storage

Access to the menus
Press
to view all stored telephone
numbers.
Press to enter the main menu.
Hold down Exit
or press
to exit
the menus (if no call is in progress).

Messages

EMS*

Inbox*
My Services*
Settings*
Service Registration*

Menu map
Calls & Times

Internet
Network
Server

Currency

Settings

Office Tools

Games
Phone Book
Office Tools

Games

Messages
Settings

Calls & Times

Sub-menu

Internet

Home page
Inbox
Bookmarks
Other site
Profile list
Settings
Push parameters

Network
Server

Information
Services

Currency

Calls log
Call timers
Phone settings
Voice mail
GSM Services
Broadcast
Scratchpad
Alarm clock
Auto-switch
Calculator
Reshape
Push
Options
Exen Games**
Settings

Items in italics depend on your subscription and your network operator.
* Available on Trium 110 m only
** Available on Trium 110 p only

Entering text
To add names to the phone books (see
page 22) and write text messages (see
page 26) you must enter text. The
phone displays
in lower case mode
and
in upper case mode when you
can enter text. Use the keypad to enter/
edit text.
You can enter text/numbers using T9

Key

Clear

Press and
hold

Action

Shift - upper/lower
case on next letter.
Caps lock/unlock if
you press and hold it.
Clear or backspace
Numbers
Space
Special character table appears if you
press and hold it.
Another matching
word
Smart punctuation
Swap between T9 and
Multitap method

Example
To enter Card in the display:
• Press and select Messages.

•
•
•
•
•
•

Select Write new.
Press :
appears.
Press . A appears.
Press . Ca appears.
Press . Car appears.
Press . Case appears.
If the displayed word is not the
one you want, press
as many
times as necessary to view Card.
• Press
to exit from this example
and return to the stand-by display.

Multitap text entry
Press on to swap between T9 text
entry and the Multitap method.
To enter text with multitap:
1 Press the key with the
required letter. If it is not the
first letter, press key repeatedly until the letter appears.
See the table that follows for
a key to character correspondence.
2 Enter the next character. If
two characters are on the
same key, wait for the display
at the top of the screen to
clear or press before pressing the same key again.
To
3
access
special
characters (23
available),
hold down . A table
appears. Press the key that
corresponds to the character.
briefly to cor4 Press Clear
rect back one letter. Hold
down to clear all text.
5 Press or to move the cursor in the text to insert characters or make corrections.

The menu

text entry or Multitap text entry.Press
to swap between T9 text entry and the
Multitap method.
To enter text with T9:
1 Press the key with the required letter only once.
Do not be put off if the character you want is not immediately displayed.
2 The ‘active’ word changes as
you type, so type to the end
of the word.
3 If your word is not displayed,
press
for other matching
words.
4 If your word is not recognised, press to swap to the
Multitap method to complete
the word.
5 Use or to locate the cursor in the text to insert characters or make corrections.
1. T9 may not be available in all languages.
2. During number and name entry a short press on
Clear deletes the last character. A long press clears
the whole display.
Tips and operation

The following table displays the
available English characters. Other
languages display different character sets.
21

Key

Character

Lower case
Upper case
1., -'@:?
abc2
ABC2
def3
DEF3
ghi4
GHI4
jkl5
JKL5
mno6
MNO6
pqrs7
PQRS7
tuv8
TUV8
wxyz9
WXYZ9
0
0
Short press swaps next letter
between upper or lower case.
Long press swaps all next letters between upper or lower
case.
Short press
enters space.
Long press gives access to
special characters.
( ) % ! ; " _ @ § + # *
/ & = < > ¥ $ £ ¡ ¿ €
Short press moves the cursor
through the text one place.
Swap between Multitap and
T9.
Example
To enter Card in the display:
• Press and select Messages.
• Select Write new.
• Press and hold
until
appears. Press
briefly three
times, C appears.
• Wait for the available characters
to go from the display, press and
hold
until
appears. Press
briefly once, a appears.
• Press
briefly three times, r
appears.
• Press
briefly once, d appears.
The word Card appears.
• Press
to exit from this example
22

and return to the stand-by display.

Network services
Your network operator provides value
added services and contact phone numbers. Depending on your operator’s implementation Applications, Services,
and/or Information appears in the display. Press and select Network Services to access these menus.

Phone book
The phone book stores data, usually
names and telephone numbers, in the
phone or SIM memory.
• The phone can store up to 100
‘phone book cards’ which can contain: family name, first name, icon,
home phone number, work phone
number, cellular phone number and
a note.
• SIMs can store up to 255 ‘SIM phone
book cards’. Actual numbers and
capacity depends on your SIM. SIM
phone book cards only contain the
name and number.
Both the SIM and the phone memories
are searched when you use the phone
book.

Storing names and telephone numbers
You can enter the names and numbers in the phone book manually or
copy them from SMS messages,
scratchpad or last dialled number
lists, etc. You can store the characters *, +, P (pause), # and _ together with numbers. See page 20 to
learn how to enter text.
Store numbers in international
format using the '+' prefix (or
00) before the country code
followed by the telephone

Phone memory
• Directly from the stand-by display:
1 Enter the number. Press
Store .
2 Select Phone names.
3 A list appears.
Select the item corresponding
to the number you entered:
home, work or cellular.
4 The following fields appear:
Field
Family name
First name

Purpose
Family or last
name
First name

5 Enter the requested data.
Confirm each entry by pressing OK .
Select
6
an icon.
The
icons
correspond
to
keys on the keypad. Press
the key corresponding to the
required icon.
In this example pressing
selects .
7 The following fields appear:
Field

Purpose
Home phone
number
Work phone
Phone number
(Work)
number
Phone number Cellular phone
(Cellular)
number
Note or comNote
ments for this
card
Phone number
(Home)

8 Enter the requested data.
Press OK .
Confirmation and number of
free locations appear.
or
9 Press and hold Exit
to return to the stand-by display.
• Using the menu:
1 Press . Select Phone Book.
2 Select Store. Select Phone
names.

3 Follow the steps in the previous procedure (“Directly from
the stand-by display”) starting with step 4 .

The menu

number. This ensures that the
number can also be dialled
from abroad.
There are several ways to store
numbers into the phone or SIM
memory:

• From last dialled, received and
unanswered lists:
1 Display a number from one of
the above, then press
Options .
2 Select Store. Select Phone
names.

3 Follow the steps in the
“Directly from the stand-by
display” procedure starting
with step 3 .
During number and name entry a short press on
Clear clears the last character. A long press clears
the whole display.
SIM phone book memory
You can enter the SIM memory
from the stand-by display, menu
or other locations.
• Directly from the stand-by display:
1 Enter the number. Press
Store .
2 Select SIM names. Press
OK .
3 Modify or confirm the number
and press OK .
4 Enter the name. Press OK .
Confirmation and number of
free locations appear.
or
to
5 Press and hold Exit
return to the stand-by display.

• Using the menu:
1 Press . Select Phone Book.
2 Select Store. Select SIM
names.

3 Enter the number and press
OK . Enter the name and
press OK . Confirmation
and number of remaining
locations appears.
or
4 Press and hold Exit
to return to the stand-by display.
• From other stored locations
Numbers stored in the last dialled,
received, unanswered, scratchpad
and SMS message locations can all
be stored in the phone book:
1 Display a number from one of
the above then press
Options .
2 Follow the steps from the
previous procedure “Using
the menu” starting with step
2.
During number and name entry a short press on
Clear clears the last character. A long press clears
the whole display.
A warning message appears when
selecting the phone book when the
SIM or phone memory is full.

Free space in the phone book
To see the remaining free space in
the SIM or phone:
1 Press . Select Phone Book.
2 Select Remaining and use
or to display the remaining
memory spaces in the phone
or SIM.
or
3 Press and hold Exit
to return to the stand-by display.
If available, the free memories in the FDN list also
appears.

Viewing and calling numbers in the
phone book
You can edit, delete, copy, move or
access phone book entries stored in
24

the phone or SIM. There are two
ways to view and call numbers in
the phone book:
• Directly from the stand-by display:
Press to display the phone book
list.
• Using the menu:
1 Press and select Phone
Book.
2 Select Recall.
3 Either press OK
or enter up
to the first 3 initials of the
name required and then press
OK .
Pressing
or
scrolls through
the phone book. To go directly to
another entry press the corresponding alphabet key. For example to go directly to entries
starting with 'N' press
twice.
If you did not enter any initials,
the phone book displays the first
entry.
4 Press to dial the number. If
there is a choice of numbers
for the phone book entry,
these appear. Select the one
that corresponds and press
.
Pressing Options
displays the
following menu choices:
Item

Function

Edits the name and
number entry
Delete
Deletes the entry
Send SMS Sends SMS message
Copies the entry to the
SIM or the phone or
Copy
vice versa. You can
edit before copying
Moves the entry to another position. You
Move
can edit before moving
Calls
the
number disCall
played
Edit

Fixed dialling numbers (FDN)
Fixed dialling only allows you to call
a group of numbers. All other numbers are rejected. FDN also prevents
call diverting and sending SMS messages to numbers not in the FDN
list. You can use wildcards to define
the groups. As this is a SIM dependent feature, some SIM cards might
not support it. SIM capacity determines the maximum number of
FDN numbers you can store. To activate/deactivate FDN you must
have the PIN2 code.
To turn on or off FDN operation:
1 Press . Select Phone Book.
2 Select Fixed Dialling. Select
Status.
3 Select On or Off. Enter the
PIN2 number.

to confirm the
4 Press OK
setting.
To view the numbers in the list:
1 Press . Select Phone Book.
2 Select Fixed Dialling.
3 Select View and use or
to scroll through the entries.
Press Options
to edit,
delete and copy numbers to
the phone or SIM.
To enter, edit or delete numbers in
the FDN list:
1 Press . Select Phone Book.
2 Select Fixed Dialling.
3 Select Add new. Enter the
PIN2 number if asked. Add,
edit, delete or copy new
numbers to the phone or
SIM.
You can use wild card spaces with numbers stored
in the FDN list. For example the number
+44 1707 278_ _ 9 allows you to call all numbers between 278009 to 278999.

The menu

or
5 Press and hold Exit
to return to the stand-by display.
Own number
You can store your main 'Line 1'
voice mobile number, your voice
mobile number for Line 2 (Alternate
Line Service) and your data and fax
numbers into the SIM card. You can
enter them manually and name
them (e.g: Line 1 'Office'.
To view, name and edit your own
display number(s):
1 Press . Select Phone Book.
2 Select Own numbers. The
mobile number for Line 1
appears.
3 Use or to view line 2,
data and fax numbers.
4 To add or edit a name or
number press Edit .
or
5 Press and hold Exit
to return to the stand-by display.

Phone book tones
30 pre-set ring tones are available,
10 with polyphonic (tri-tones) and
20 with mono-tones. Storage of up
to 40 ring tones is possible. That is,
you can add one self-composed
ring tone and 9 other ring tones
you download in addition to the existing 30 ring tones. If you want,
you can replace any of these ring
tones except the Trium ring tone.
To have different tones for incoming calls where the identities are
known in the SIM or phone memory:
1 Press . Select Phone Book.
2 Select Phone Book Tones.
3 Select Phone names or SIM
names. Press Select .
4 Select the tone you want and
press Select . The phone
stores your selection.
25

Messages (SMS)
You can exchange short text messages
of up to 160 characters with other mobile phones with SMS. You can also
store, edit and forward messages and
save any of the numbers they contain.

Reading a received SMS message
When the phone receives an SMS
message a new SMS alert tone
sounds and
appears. The SIM
stores the message. If
flashes
there is no more space in the SIM to
store new messages. Delete previous messages to make space for
new ones.
Press Read
to read all received
messages (Inbox).

Reading stored SMS messages
1 Press . Select Messages

Function

Displays the remainRead text
der of the text
Delete
Deletes the message
Replies to the sender
Reply
of the message
Replies to the sender
Reply
of the message with
(+ text)
the initial text
Forwards
the mesForward
sage to another user
Forwards a set of several (5 maximum)
Forward
to n
messages to 5 different addressees
Stores or calls the
number(s) contained
Numbers
in the SMS header or
text
The items of this menu depend on the type of message received.

(then SMS on Trium 110 m).
2 Select Inbox to display the
first message header.
to select the
3 Use and
message.
4 Press or select Options /
Read text to read the message text.
You can now read all stored messages. For a given message,
shows the message is new.
shows you have already read the
message.

Turning on or off the message alert
tone

Managing received and stored SMS
messages

You can write and send text messages. To use SMS, check that the
number for the message centre is
configured:
1 Press . Select Messages.
2 Select Settings.
3 Select Message centre.
If a number appears do nothing.
If empty, enter the number manually (in international format) or
from a stored memory. If you do

After reading the SMS message
press Options
for the following
menu:

Item

Each time a message is received the
SMS alert tone sounds. To turn on
or off this tone:
1 Press . Select Messages.
2 Select Alert. Select On or Off.
or
3 Press and hold Exit
to return to the stand-by display.

Preparing the phone to send SMS
messages

Option

Description

Time held at
message
centre.
12 hours,
Validity
1 day, 2
Period
days or
Maximum
(defined by
operator)
Selects format of mesFormat sage, text,
voice, fax or
pager
Reply rePaid
Reply to quested
Delivery reStatus
report to port

Default

Maximum

Text

Off
Off

Creating a draft text
Parts of a message are often the
same, such as the greeting or signature. To save time, you can create a
draft text for these parts. Then
when you want to write a message,
you access the draft text and only
write the specific part of the message. You can set up to 10 message
drafts, which can hold up to 48
characters each. The mobile memory stores the drafts.
To create a draft text:
1 Press . Select Messages.
2 Select Draft texts.
3 Choose any blank template
([...]) and press Edit .

4 Enter the draft text and press
OK .
or
5 Press and hold Exit
to return to the stand-by display.
Editing a draft text
1 Press . Select Messages.
2 Select Draft texts.
3 Select the draft text to modify
and press Edit .
4 Edit the text and press OK .
or
5 Press and hold Exit
to return to the stand-by display.

Sending a new SMS message to
one addressee
1 Press . Select Messages.
2 Select Write new.
3 You can either choose a draft

The menu

not have this number, ask your
service provider for it.
or
4 Press and hold Exit
to return to the stand-by display.
If required you can also choose the
validity period, format, paid reply
request and request a delivery report. Default settings are assumed
if not set.

text (if you set one up) or
enter the message text and
press OK .
4 Select Send.
5 Choose a message template
(if you have stored 2 or more
templates) and then enter the
destination number or select
Names
to choose a
number from a phone book
entry. Press to validate your
choice. Press OK . Sending
and sent confirmation
appears for each addressee.
or
6 Press and hold Exit
to return to the stand-by display.

Sending a new SMS message to
many addressees
1 Press . Select Messages.
2 Select Write new.
3 You can either choose a draft
text (if you set one up) or
enter the message text and
press OK .
4 Select Multicast.

5 Choose a message template
(if you have stored 2 or more
templates).
Enter up to 5 destination
numbers or select Names
to choose up to 5 numbers in
the phone book.
Press to validate your
choice. Press OK .
Sent confirmation appears.
or
6 Press and hold Exit
to return to the stand-by display.
Storing a new SMS message
1 Press . Select Messages.
2 Select Write new.
3 You can either choose a draft
text or enter the message text
and press OK .
4 Select Store.
or
5 Press and hold Exit
to return to the stand-by display.

Modifying and re-sending messages in the outbox
The outbox contains unsent draft
messages, stored sent messages
and sent but undelivered messages.
You can modify and re-send these
as new messages.
To select an outbox message:
1 Press . Select Messages.
2 Select Outbox and use or
to scroll to the desired
message. Messages are either
“transmitted” (
) or “to be
sent” ( ).
to read,
3 Press Options
delete, request a status
report, send (or re-send) to
one addressee, edit a sent
message and send (or resend) to many addressees.
4 Follow the instructions displayed on the screen.

Status request on sent messages
If you request the status of a delivered message the delivery date and
28

time appears. If you request the status of a sent message the network
sends a status report (if this feature
is supported). Press OK
to acknowledge the report.
To act upon a received status report
and its related message:
1 Press Options . The following menu appears:
Item
Delete
message
Clear
Associated
message
Send
again

Action

Deletes the corresponding sent SMS
message and the status report
To acknowledge the
status report and
clear the display
Displays the corresponding sent SMS
message
Sends the same message again

2 Select the action required and
press OK .

Re-usable message templates
The Msg templates menu option
appears in the Messages - Settings
menu if your SIM supports this feature. Message templates are sets of
message parameters and are stored
in SIM memory. You can name and
select the templates when needed.
To create a message template:
1 Press . Select Messages.
Select Settings.
2 Select Msg templates.
Choose any blank template
([...]).
3 Enter the template Name,
Message centre number,
Validity period and Format.
Default settings for pay reply and
status are assumed 'off' unless set
and are common to all templates. If
you set one template only the

Storage consumption
To consult the memory used by
SMS:
1 Press . Select Messages.
2 Select Storage.
3 Use or to view all the
SMS storage information
(SMS storage, SMS outbox
and SMS inbox).
or
4 Press and hold Exit
to return to the stand-by display.

EMS 1
EMS stands for Enhanced Message Sevice. This feature allows to receive messages with text, melodies, images and
animated icons. These messages are
sent via the Internet; they may bear promotional information or commercial offers.
The use of this feature is registration dependent and may not be available in all
areas.

EMS Menu
1 Press . Select Messages
2 Select EMS.
3 Select the menu item you

want to access.
or
to
4 Press Cancel
return to the stand-by display.

Inbox
To read or delete stored messages

My services

To reach the list of registered services

Settings

To reset or delete the EMS contents

Service Registration

To enter the address of the service sites.

1. Available on Trium 110 m only

Reading a received EMS message
When the phone receives an EMS
message a new alert tone sounds
and
appears. The phone stores
the message. If flashes there is no
more space in the phone to store
new messages. Delete previous
messages to make space for new
ones.
Press Read
to read all received
messages (Inbox).

Reading stored EMS messages
1 Press . Select Messages.
2 Select EMS.
3 Select Inbox.
to select the
4 Use and

The menu

phone uses it by default. Otherwise
select the template you want when
sending a message.

message.
5 Press or select OK to read
the message text or delete
the message.
You can now read all stored messages. For a given message,
shows the message is new.
shows you have already read the
message.

Calls & Times
Access the Calls & Times menu to check
the details of individual incoming and
outgoing calls, the duration of the last
call or the total time for all previous
calls.

Calls log
Calls log stores the identity, time,
date and call duration of the last
10 numbers dialled, the last 10 received unanswered calls and the
last 10 received calls. The call logs
are common for both Line 1 and
Line 2.
1 Press . Select Calls & Times.
2 Select Calls Log.
3 Select Last dial, Unanswered or Received.
29

4 Use or to scroll through
the list.
If the caller’s number is not available, Unknown number appears
(unanswered and received lists).
Pressing
while on a displayed
number calls that number.
Pressing Options
accesses the
following menu:
Item
Store
Delete
Delete
all
Edit

Details

Call
Send
SMS

Action

Stores the number in
the phone book
Deletes the entry
Deletes all the entries
Edits the displayed
number
Views the details name, number, time
and date and call duration of the highlighted
number
Makes a call to the
number
Sends SMS message

Use
or
to select the required
option and follow the display
prompts.
Press and hold Exit
or
to return to the stand-by display.
Press when in stand-by display to access the
last 10 dialled calls.

Call times
Call times stores the duration of the
last call, total accumulated time of
all calls and total time for Line 1 and
Line 2. The Details
sub-menu
stores times for calls made and received through the subscription
network and through other (national and international) networks.
1 Press . Select Calls & Times.
2 Select Call timers.
30

3 Select Show.
4 Use or to view all the
timer information.
The call type and the accumulated times of outgoing and incoming calls appears.

to display
5 Press Details
details on My network,
National roaming and
Int’nal roaming calls.
to return to
6 Press or Exit
the previous display.
Press and hold Exit
or
to return to the stand-by display.
If Line 2 is subscribed to 'All Calls' for Line 1 and
Line 2 appear separately.

Balance information (subscription
service only)
Some networks provide your call
time balance. You have to call a
specific number (given by your network operator) in order to get this
information.
Contact your service provider for
availability and details.
1 Press . Select Calls & Times.
2 Select Call timers.
3 Select Balance information .
4 Select Set number (only necessary the first time you use
this service) to check that the
balance information centre
number is set. If not, enter
the number provided by your
service provider and press
OK .
5 Select Call. The phone calls the
centre. Press
when you
want to end the call.

Call timer - reset
To reset all the call timers, you need
the 4 digit phone lock code.
1 Press . Select Calls & Times.
2 Select Call timers.
3 Select Reset.
4 Select Yes or No.
5 Enter the phone lock code
and press OK .
or
6 Press and hold Exit
to return to the stand-by display.

Call costs management (subscription service only)
An Advice of Charge (AoC) subscription service shows the cost of the
last call made, the accumulated total cost of all calls and the remaining balance in units or currency of
any 'cost limit' you set. Check with
your service provider to see if they
offer this feature.Select the currency and cost per unit; otherwise call
costs display in generic units.
To set currency and cost per unit:
1 Press . Select Calls & Times.

2 Select Call costs.
3 Select Display cost type.
4 Select Currency. The present
currency settings appears.
5 Press Edit . Enter the PIN 2
code and press OK .
6 Enter the abbreviated letters
of the currency. Press OK .
7 Enter the cost per unit in the
selected currency. Press
OK .
or
8 Press and hold Exit
to return to the stand-by display.
To set call cost type to units:
1 Press . Select Calls & Times.
2 Select Call costs.
3 Select Display cost type.
4 Select Units.
5 Press and hold Exit
or
to

The menu

or
6 Press and hold Exit
to return to the stand-by display.
Reminder - Call duration
You can set a call duration reminder
in multiples of 1 minute (1 - 59
min.) intervals. It beeps at the set
intervals.
1 Press . Select Calls & Times.
2 Select Call timers.
3 Select Reminder.
4 Select On (or Off).
5 Select the period (between 1
and 59 mins).
6 Press OK .
or
7 Press and hold Exit
to return to the stand-by display.

return to the stand-by display.

When you set the cost type to units the credit limit
and the remaining credit appear in units.

Setting the credit limit - in units or
currency
You can set a credit limit in units or
currency. The phone prevents making and receiving all chargeable
calls when the phones reaches the
credit limit. You can still make
emergency calls.
1 Press . Select Calls & Times.
2 Select Call costs.
3 Select Credit Limit. The
present credit limit setting
appears.
4 Press Edit . Enter the PIN 2
code and press OK .
5 Enter the credit limit (use
to enter a decimal point).
Press OK
to validate.
or
6 Press and hold Exit
to return to the stand-by display.
When you enter a credit limit the selection from the
'Credit Limit' displays Edit or Set No Limit.
31

Show costs
1 Press . Select Calls & Times.
2 Select Call costs.
3 Select Show.
4 Use or to display the

cost of the Last Call, All Calls
and the Remaining credits.
or
5 Press and hold Exit
to return to the stand-by display.
The Cost Type menu units or currency setting determines whether the remaining credit displays units
or currency.

Call costs - resetting all costs to
zero
To reset all the call costs to zero you
need the PIN 2 code.
1 Press . Select Calls & Times.
2 Select Call costs.
3 Select Reset.
4 Select Yes to reset the costs
or No to exit.
If you select Yes, enter the
PIN 2 number and press
OK . All Costs Reset
appears briefly.
or
5 Press and hold Exit
to return to the stand-by display.

Alternate line service - selecting
Line 2 (subscription service)
Some GSM 1800 operators support
the use of a second line for users.
You can have two mobile phone
numbers, e.g. a business and personal line. To select the line for outgoing calls:
1 Press . Select Calls & Times.
2 Select Line selection .
The current line selection
appears.
3 Use or to scroll to the
line required and press
Select
or to validate
your choice.

or
4 Press and hold Exit
to return to the stand-by display.
You can assign names to Line 1 and Line 2, e.g.
Office and Home. See page 25 for details. You
must select the line to make outgoing calls. You
can receive calls from either line.

Settings - customising
your phone
Phone settings
Keypad lock
See page 15 for more information.
Language selection
To select the language of your
choice:
1 Press . Select Settings.
2 Select Phone settings. Select
Language.
3 Use or to select a language from the displayed list.
Press Select to validate.
or
4 Press and hold Exit
to return to the stand-by display.
To reset the phone to the language of the SIM
enter *#0000#.
To reset the phone language to English enter
*#0044#.
Tones - Alert mode
To turn on or off the audible incoming ring tone, alert and alarm
tones:
• Using the menu:
1 Press . Select Settings.
2 Select Phone settings. Select
Tones.
3 Select Alert tones.
4 Select Ring, Vibrate, Vibrate
& ring or Vibrate then ring.
or
5 Press and hold Exit
to return to the stand-by display.

1. If you select Ring but the ring tone volume is off
the icon appears.
2. appears if you select Vibrate, Vibrate & ring or
Vibrate then ring. It takes precedence over .
3. When the phone is connected to either the Desk
Top Charger, HF kit, CLA or AC adaptor the phone
rings instead of vibrates.
4. If you choose the 'Vibrate' or 'Vibrate then ring'
option, the vibrating action replaces all the alert
and alarm tones.

Ring tone selection
To choose an incoming ring tone:
1 Press . Select Settings.
2 Select Phone settings. Select
Tones.
3 Select Melodies.
4 To help you identify incoming
calls you can give the Standard/Line 1, Phone names,
SIM names and Line 2 calls
and Alarm different ring
tones.
Use or
to highlight the
required call type and press
to select it.
5 Use or to listen to the
different ring tones. Press
to select the current tone.
or
6 Press and hold Exit
to return to the stand-by display.
Volume adjustments
To individually adjust the volume
level of the ring tone, key tones,
alarm tones and incoming audio
from the stand-by display, press .
Alternatively, access Volume control from the Settings menu:
1 Press . Select Settings.

2 Select Phone settings. Select
Tones.
3 Select Volume.
4 Select Ring, Keys, Conversation or Alarm.
The display confirms the selection, naming the volume to be
adjusted.

5 Use or to adjust the setting.
to validate the
6 Press OK
setting.
or
7 Press and hold Exit
to return to the stand-by display.

The menu

• Directly from the stand-by display:
1 Press displays Ring, Silent,
Vibrate, Vibrate & ring or
Vibrate then ring.
Scroll to the desired setting.
2 Press Select to validate your
choice. (If any of the vibrate
options are selected the
phone briefly vibrates).
appears.

During a call, you can adjust the
conversation volume by using
or .
If the ring tone volume level is set to 0 displays.
Automatic ramping
Your phone was designed with an
automatic
ramping
feature.
When your phone rings, the volume level is lower than the volume level you have set.
Adjustment is made from low or
medium volume level to the volume level you have set (see “Volume adjustments”, page 33).
This feature is a default setting
and cannot be deactivated. Ramping and Automatic Ramping are
compatible; both will work if
Ramping is activated.
Ramping
Ramping causes the incoming
ring tone to increase step by step
to the maximum volume level.
33

1 Press . Select Settings.
2 Select Phone settings. Select
Tones.
3 Select Volume.
4 Select Ramping.
5 Select On or Off.
or
6 Press and hold Exit
to return to the stand-by display.
When turned on the volume of the incoming ring
tone starts from the selected ringer volume (just
after the automatic ramping) and rises to the maximum volume.
Backlight - setting
To set the backlight during key
entry or incoming ring tone, you
have two options:
• On for 10 sec.: the display and
key backlight stays on for
10 seconds after the last key
press or incoming call.
• Off: the backlight stays off
except on incoming call.
1 Press Select. Select Settings.
2 Select Phone settings. Select
Display.
3 Select Backlight.
4 Select one of the two settings. Press to validate.
or
5 Press and hold Exit
to return to the stand-by display.
Display contrast
To modify the display contrast because of bad light conditions:
1 Press . Select Settings.
2 Select Phone settings. Select
Display.
3 Select Contrast.
4 Adjust the contrast using
or .
to validate the
5 Press OK
setting.
or
6 Press and hold Exit
to return to the stand-by display.
34

Menu graphics
Choose from a set of graphics to
personalise your main menu images and icons. There are 3 menu
themes.
To change the menu graphics:
1 Press . Select Settings.
2 Select Phone settings. Select
Menu graphics.

3 Use

or
to scroll the sets of
menu graphics and press
Select
to validate your
choice.
Press and hold Exit
or
to
return to the stand-by display.

Any key answer
To enable any key (except
and
No ring
) to be pressed to answer an incoming call:
1 Press . Select Settings.
2 Select Phone settings. Select
Keys.
3 Select Any key answer.
4 Select On or Off.
or
5 Press and hold Exit
to return to the stand-by display.
Softkeys - programming the
softkeys
You can change the function of
the softkeys. There are two ways:
• Directly from the stand-by display:
1 Press and hold down the left
or right .
2 Use or to scroll through
the choice of softkey options.
to validate
3 Press Select
your choice.
4 The screen confirms your
selection and returns to the
stand-by display showing
your new softkey function.
• Using the menu:
1 Press . Select Settings.

automatically answers an incoming call after approximately 5 seconds.
1 Press . Select Settings.
2 Select Phone settings. Select
Auto features.
3 Select Auto-answer.
4 Select On or Off.
or
5 Press and hold Exit
to return to the stand-by display.
Auto-retry
To automatically retry the
number of a failed call (up to
10 times):
1 Press . Select Settings.
2 Select Phone settings. Select
Auto features.
3 Select Auto-retry.
4 Select On or Off.
or
5 Press and hold Exit
to return to the stand-by display.

The menu

2 Select Phone settings. Select
Keys.
3 Select Softkeys functions.
4 Select Left softkey or Right
softkey.
on the softkey
5 Press Select
option of your choice.
or
6 Press and hold Exit
to return to the stand-by display.
(......) in the display means that a previously SIM
dependent or subscription service assigned to that
softkey is no longer available. For example Line 2
selection.
Speed dialling
You can assign phone book numbers to keys
. Hold down
the key to dial the number. The
phone reserves
exclusively for
the voice mail number. The phone
automatically assigns this key to
the voice mail number if stored
(see “Voice mail”, page 38).
You can select any stored
number.
To assign phone book numbers to
the speed dialling keys:
1 Press . Select Settings.
2 Select Phone settings. Select
Keys.
3 Select Speed Dial.
4 Use or to scroll to the
next key.
to choose
5 Select Names
the phone book entry and
press Select
to validate
your choice.
or
6 Press and hold Exit
to return to the stand-by display.
If you delete the number from the phone book this
also deletes it from the associated key.
Auto answer
This feature only works when you
connect the phone to a hands
free car kit or headset. The phone

When activated, Auto-retry and a
countdown timer to the next call
attempt appears. An auto-retry
warning tone sounds each time
the phone attempts a new retry.
If successful, proceed with the
call as normal. Press Exit
or
any key during the retrying process to cancel auto-retry and end
the dialling process for that call.
Security features
The security features described in
this section protects your phone
from unauthorised use.
For all codes
When requested, enter the code,
which appears as asterisks (*) and
press OK .
If you make a mistake press
Clear
and enter the correct
digit(s) before pressing OK .
35

Avoid using codes similar to emergency numbers
such as 999 or 112 to prevent accidental dialling
of these numbers.
KEEP A RECORD OF YOUR CODES
AND KEEP THEM IN A SAFE
PLACE. FAILURE TO DO SO CAN
CAUSE YOU CONSIDERABLE INCONVENIENCE.
Phone lock code
A phone lock code prevents unauthorised access to the phone and
WAP™ settings. You also need it
to reset the call timers. The factory setting is 0000. Reset this code
and keep it in a safe place, separate from the phone. When enabled the phone asks for the code
each time the phone is turned on.
To change the phone lock code:
1 Press . Select Settings.
2 Select Phone settings. Select
Security.
3 Select Phone lock.
4 Select Change code and follow the display prompts.
to validate the
5 Press OK
new code.
or
6 Press and hold Exit
to return to the stand-by display.
To turn on or off the phone lock
code:
1 Press . Select Settings.
2 Select Phone settings. Select
Security.
3 Select Phone lock.
4 Select On or Off.
5 The phone requests the
phone lock code to authorise
your selection.
or
6 Press and hold Exit
to return to the stand-by display.
Phone lock still enables you to make emergency
calls.

PIN code
The 4-8 digit PIN code for the SIM
protects it from unauthorised
use. When enabled the phone requests the PIN code each time the
phone is turned on. If you enter
the wrong PIN code three times in
succession your SIM card is
blocked and you need the 8 digit
PUK code from your service provider (see page 37). To turn on
and off the PIN:
1 Press . Select Settings.
2 Select Phone settings. Select
Security.
If already off, PIN enable
appears.
If already on, PIN disable
and PIN change appear.
and follow
3 Press Select
the displayed prompts.
to validate your
4 Press OK
entry. PIN enabled or PIN
disabled appear briefly to
confirm your action.
or
5 Press and hold Exit
to return to the stand-by display.
To change the PIN code (PIN must
first be enabled):
1 Press . Select Settings.
2 Select Phone settings. Select
Security.
3 Select PIN change and follow
the displayed prompts.
to validate your
4 Press OK
new PIN.
or
5 Press and hold Exit
to return to the stand-by display.
PIN2 code
The PIN2 code prevents unauthorised access to FDN operations, modifying the FDN phone
book, setting calls costs to zero,
modifying the costs display features. You can change it but you

PUK code
Only your service provider can
give you the 8 digit PUK (PIN unblock key). Use it to 'unblock' a
PIN whose code has been entered
incorrectly three times. A PUK
code cannot be changed.
Enter the PUK code and press
OK
. Enter a new PIN code by
following the displayed prompts.
If you enter the wrong PUK code 10 times in succession your SIM card cannot be used again. Contact your service provider for a new card.
PUK2 code
Only your service provider can
give you the 8 digit PUK2. Use it
to unblock a PIN2 whose code has
been entered incorrectly three
times. You cannot change the
PUK2 code.
Enter the PUK2 code. Enter a new
PIN2 code by following the displayed prompts.
If you enter the wrong PUK2 code 10 times in succession you are unable to use the features requiring the PIN2 code. Contact your service provider for
a new card.

Time & date setting
To set the current time and/or
date:
1 Press . Select Settings.
2 Select Phone settings. Select
Time & date.

3 Select Set time or Set date.
4 Enter the time (in 24 hour
format) or date in the format
shown. (If required use
and )
to validate your
5 Press OK
entry.
or
6 Press and hold Exit
to return to the stand-by display.
1. An error message appears if you make a wrong
entry.
2. The time/date are displayed when the phone is
on. It does not show the year.
3. You may have to re-enter the time and date if
the battery was taken out.
Default (factory) settings
Use the Settings menu to return
to the factory settings. This does
not affect the phone book entries, phone lock code or SIM.
1 Press . Select Settings.
2 Select Phone settings. Select
Default settings.
3 Select Yes or No.
or
4 Press and hold Exit
to return to the stand-by display.

The menu

can not turn it on or off.
To change the PIN2 code:
1 Press . Select Settings.
2 Select Phone settings. Select
Security .
3 Select PIN2 change and follow the display prompts.
to validate your
4 Press OK
new PIN2 code.
or
5 Press and hold Exit
to return to the stand-by display.

The following are the factory default settings:
Feature
Factory setting
Alert Tones
Ring
Ring Tones
Trium
Volumes,
Ring, Key,
Mid values
Speech and
Alarm.
Backlight and On for 10 sec. and
Contrast
mid value
Any Key,
Auto-Retry
and Auto AnOff
swer fea-

tures.

Ramping
Menu graphics

Off
Trium
37

Melody download
You can also download melodies
from the Trium web site
(www.mitsubishi-telecom.com).
This site downloads the melodies
to your phone using SMS. When
the download completes,
Press Options
and then select
Play to play the melody.
Press Options
and then select
Install to store the melody.

Voice mail
Voice mail operates like an answering machine. Contact your service
provider for details.
Storing a voice mail centre number
If your SIM does not automatically include the voice mail centre
number, you must manually set
it:
1 Press . Select Settings.
2 Select Voice Mail.
3 Select Number. When
prompted enter the number
manually or from a stored
memory.
to validate your
4 Press OK
entry.
or
5 Press and hold Exit
to return to the stand-by display.
If you subscribe to the 'Line 2' service, store the
voice mail centre number separately for that line.
The phone automatically assigns the voice mail
number to speed dial location number 1 (see
Speed dialling on page 35).
Turning on/off the voice mail alert
tone
To turn on/off the voice mail alert
tone:
1 Press . Select Settings.
2 Select Voice Mail.
3 Select Alert. Select On or Off.

or
4 Press and hold Exit
to return to the stand-by display.
Calling the voice mail centre to
check for messages
There are two ways:
• To dial the voice mail centre
directly after the receipt of a
message:
Press and hold down .
• Or from the menu:
1 Press . Select Settings.
2 Select Voice Mail.
3 Select Call.
Dialling proceeds as for a normal
call.
If a voice mail number is not stored when you
select Call, the phone asks you to enter the voice
mail number. Proceed as described in Storing a
voice mail centre number, page 38.

GSM services
The services described hereafter
are a non-exhaustive list of GSM
services. Please contact your operator/service provider for more
information.

Divert options

Action

Diverts all incoming voice calls unconditionally
Diverts all voice
calls when the
When not
phone cannot be
reachable
reached, i.e. out
of service
Diverts all voice
calls when the
On no reply
phone does not
answer
Diverts all voice
When busy
calls when the
phone is busy
Diverts all voice
calls when Not
All conditions Reachable, No Reply and When
Busy
Cancel all
Cancels all diverts
Diverts uncondiAll FAX calls tionally all incoming fax calls
Diverts uncondiAll DATA calls tionally all incoming data calls
Always

3 Use or to select the
divert condition and validate
by pressing Select
or .
4 Select Activate.
5 Use or to choose
between Voice Mail, Names
or Number.

or to vali6 Press Select
date your selection.
The display confirms your
request.
or
7 Press and hold Exit
to return to the stand-by display.
1. If you select 'On no reply' option you must also
enter a delay period of 5, 15 or 30 seconds.
2. Call diverts for both Line 1 and Line 2 must be
set individually. Select the out-going line before
following the above procedure. To carry out a call
divert on the other line you must select this other
line first (menu Calls & Times - Line selection).
To turn off or check the status of
call divert:
1 Press . Select Settings.
2 Select GSM Services. Select

The menu

Diverting incoming calls (network
service)
Call diverting diverts incoming
calls, whether voice, fax or data,
to another number.
To turn on call divert:
1 Press . Select Settings.
2 Select GSM Services.
Select Call diverting to access
the following menu:

Call diverting.

3 Select from the divert options
and press .
4 Select Cancel or Status.
The phone confirms your
selection.
or
5 Press and hold Exit
to return to the stand-by display.
To cancel all (multiple) diverts:
1 Press . Select Settings.
2 Select GSM Services. Select
Call diverting.

3 Select Cancel all . The phone
confirms your selection.
or
4 Press and hold Exit
to return to the stand-by display.
This action cancels all voice diverts (for voice, faxes
and data calls) for the line currently in use. To cancel call diverts for the other line you must select this
other line first (menu Calls & Times - Line selection).
Caller Line Identity - showing/hiding
your mobile number
Most networks allow the Caller
Line Identity feature (CLI) i.e.
showing the incoming number
(ID) while receiving a call. Select39

ing Receiving caller ID allows
you to check its availability from
the network.
Receiving caller ID
To find out whether a network
presents the ID of incoming calls:
1 Press . Select Settings.
2 Select GSM Services. Select
Receiving caller ID.
The network returns either
Presentation available or
Presentation unavailable.
or
3 Press and hold Exit
to return to the stand-by display.
To hide your number, on a call by
call basis, add #31# before the
number you are calling. Alternatively you can ask your service operator to always disable the
sending of your mobile number.
In this case to reveal your
number, on a call by call basis,
add *31# before the number you
wish to call.
Standard network setting
To reset the standard network
setting for sending your mobile
ID:
1 Press . Select Settings.
2 Select GSM Services. Select
Sending my ID.
3 Select My settings.
4 Select Preset. The phone
resets to the network setting
agreed with your service provider.
or
5 Press and hold Exit
to return to the stand-by display.
Hiding or showing your number
1 Press . Select Settings.
2 Select GSM Services. Select
Sending my ID.
3 Select My settings.
40

4 Select Hide my ID or Show
my ID.
or
5 Press and hold Exit
to return to the stand-by display.
Finding out your current ID setting
1 Press . Select Settings.
2 Select GSM Services. Select
Sending my ID.
3 Select Status.
The phone displays your current setting, taking into
account both network and
phone settings.
or
4 Press and hold Exit
to return to the stand-by display.
Network
When turned on, the phone automatically searches for the last network it was registered on. If this is
not available, the phone automatically searches and, if able
and allowed, selects a network.
Editing the preferred list
You can change the order and
names in the preferred networks
list stored in your SIM by choosing from the list in your phone.
This is useful while roaming if you
know a network provider that is
more economical than another.
1 Press . Select Settings.
2 Select GSM Services. Select
Network.
3 Select Preferred list. A list of
networks appears.
4 Use or to view the list.
to change it.
5 Press Options
The following items appear:

Description
Displays the general list of all known
networks conModify by list
tained in the
phone in alphabetical order
Edits or enters a
network number
Modify by
(MCC MNC) if you
code
know this information.
Delete
Deletes an entry

to confirm the
6 Press Select
selection.
or
7 Press and hold Exit
to return to the stand-by display.
Your SIM may contain a forbidden list of networks which cannot
be used. To view the forbidden
list or show the home network:
1 Press . Select Settings.
2 Select GSM Services. Select
Network .
3 Select either Forbidden or
Home network.
A list of the forbidden networks or the home network
appears.
to return to the
4 Press
stand-by display.

6 Press Select to confirm the
selection.
Requesting... followed by
the name of the network
appears. The phone then
returns to the stand-by display.
You cannot delete a network from the forbidden
list. This list is automatically updated when you
perform the manual network selection.
Selecting automatic search (normal
default setting)
To perform an automatic search
from the preferred list:
1 Press . Select Settings.
2 Select GSM Services. Select
Network.
3 Select Search.
4 Select Automatic.
or
5 Press and hold Exit
to return to the stand-by display.

The menu

Option

Selecting manual search
To select a specific network, e.g.
one which provides better coverage in your current location:
1 Press . Select Settings.
2 Select GSM Services. Select
Network .
3 Select Search.
4 Select Manual. A confirmation screen and Scanning for
networks... appears.
5 Use or to select a network from the list shown.

tial password. To change the
password:
1 Press . Select Settings.
2 Select GSM Services. Select
Call barring.
3 Select Change password and
follow the displayed prompts.
to validate.
4 Press OK
or
5 Press and hold Exit
to return to the stand-by display.

Call barring (network service)
To stop different types of calls being made and received on the
phone, you need a call barring
password available only from
your service provider.
1 Press . Select Settings.
2 Select GSM Services. Select
Call barring.
3 Select Outgoing calls or
Incoming calls. Choose:
Select
Outgoing
- All outgoing

4 Select the option using or
. Press Select .
5 Select Activate. Enter the
password and press OK .
The network confirms the
selection.
or
6 Press and hold Exit
to return to the stand-by display.
Call barring password
Use the call barring password to
select the call barring levels outlined in the GSM Services - Call
barring menu (see page 42). Your
service provider gives you the ini42

Summary of code/password entry
chart

Meaning

Bars all outgoing calls
Bars only all
outgoing inOutgoing
- Int'nal calls
ternational
calls
Bars all outgoing international calls
Outgoing
except for oth- Int'nal excl.
er subscribers
home
within the users home network
Bars all incomIncoming
- All incoming
ing calls
Bars all incoming calls when
Incoming
- Roaming only
not on the
home network

Password

Length

Phone
unlock
code

4 digits

4-8
digits

PIN2

4-8
digits

PUK

8 digits

PUK2

8 digits

Call
barring
password

4 digits

If
blocked
or
forgotten
Return
phone to
Unlimited
manufacturer
Unblocked
3 tries
by use of
PUK code
Unblocked
by use of
3 tries
PUK2
code
Contact
your serv10 tries
ice provider
Contact
your serv10 tries
ice provider
Number
of trials
allowed

Network
determined

Contact
your service provider

To cancel or check the status of a
call bar:
1 Press . Select Settings.
2 Select GSM Services. Select
Call barring.
3 Use or to select the bar

Broadcast - cell broadcast messages (Network Service)
Networks can broadcast messages
to all GSM users that can give information about local area dialling
codes, weather reports, traffic news
etc. You can decide what type of information to receive by choosing
the corresponding number. You
can program to receive up to 5 different types of messages.
You can select from a list of 16
standard message types. New message types can be programmed into
the selection list using the 3 digit
cell broadcast type number. Contact your service provider for more
details.
Enter at least one message type into
the selection list or you cannot activate the service.
To enter a message type in the selection list
You can enter up to 5 different
message types.
1 Press . Select Settings.

2 Select Broadcast.
3 Select Message types. Press
Options .
4 Select Modify by list (or Modify by code if type number is
known).
5 Scroll to the message type
required. Press Select
to
validate your selection. The
display confirms your choice.
again to
6 Press Options
select more message types
from the list, enter a message
type number if known, or
delete a message type.
or
7 Press and hold Exit
to return to the stand-by display.
To turn on or off the broadcast
service
1 Press . Select Settings.
2 Select Broadcast.
3 Select On/Off.
4 Select On or Off.
or
5 Press and hold Exit
to return to the stand-by display.

The menu

to cancel or check the status
and press .
You must have the password
to cancel a call bar.
or
4 Press and hold Exit
to return to the stand-by display.
To change the password:
1 Press . Select Settings.
2 Select GSM Services. Select
Call barring.
3 Select Change password.
Enter the old password once
and the new password twice
when prompted. The phone
confirms the change.
or
4 Press and hold Exit
to return to the stand-by display.

Reading broadcast messages
Broadcast messages appear in the
stand-by display only. The phone
suppresses them during conversation or menu operation. A message can be up to 93 characters in
length and cover several pages.
Pages scroll automatically about
every five seconds. To scroll
down, press .
Options during message display
Press on Exit
to clear the message currently displayed. Press
to dial the number displayed in
the message.
Pressing Options
displays the
following menu:

Option
Delete
Delete All
Numbers

Broadcast
Off

Action

To delete the current message
To delete all messages stored in
the queue
To display all
phone numbers
found in the message text. This allows dialling or
storing them in
the scratchpad if
required
To turns off cell
broadcast

Turning the broadcast alert tone on
or off
To turn on or off the alert tone
the phone gives when a broadcast message arrives:
1 Press . Select Settings.
2 Select Broadcast.
3 Select Alert.
4 Select On or Off.
or
5 Press and hold Exit
to return to the stand-by display.
Deleting or editing a message type
from the list
To delete or edit a message type:
1 Press . Select Settings.
2 Select Broadcast.
3 Select Message types. Press
Options .
4 Select Modify by list or Modify by code.
or
5 Press and hold Exit
to return to the stand-by display.
Broadcast language
To select the broadcast language:
1 Press . Select Settings.
2 Select Broadcast.
3 Select Language.
44

4 Use or to select a language from the displayed list.
Press to validate.
or
5 Press and hold Exit
to return to the stand-by display.

Using the office tools
The Office Tools menu contains a
scratchpad, an alarm clock, an autoswitch feature and a calculator.

Scratchpad
You can store up to 5 separate entries of 36 characters in the scratchpad.
1 Press . Select Office Tools.
2 Select Scratchpad.
3 Select Read Notes. Use or
to scroll through the
entries.
Select Write Notes to make a
new scratchpad entry.
Press Options
when reading entries to access the following menu:
Item
Store
Edit
Delete
Delete all
Call

Action

Save a number to
the phone book
Modify an entry
Delete an entry
Delete all entries
Call the number
displayed in the
entry

Alarm clock
To set a daily 'Reminder Alarm':
When 'on' the alarm activates at the same time
every day until turned off.
1 Press . Select Office Tools.
2 Select Alarm clock.
3 Select On and enter the alarm
time (in 24 hour format) or
press OK
to accept the displayed time.
Confirmation appears.

To use as a Reminder or Snooze
Alarm:
Press No ring , or any other key
(except Valid. ) to stop the
alarm. The alarm icon remain on
the display and the alarm rings
again 3 minutes later.
You can repeat the snooze for up to
15 minutes, after which the phone
returns to its previous state, either
off or on stand-by.
To turn off the alarm:
1 Press . Select Office Tools.
2 Select Alarm clock.
3 Select Off. Confirmation
appears.
or
4 Press and hold Exit
to return to the stand-by display.
Caution - Please remember to
turn off the alarm feature when
boarding an aircraft where the
use of a mobile phone is not
permitted and is illegal. Alternatively, you can remove the battery after turning off the phone.
See the General safety warnings
on page 4.

Auto-switch
You can set your phone to switch
on and off automatically. Turning it
off helps to conserve battery life.
Please note that during auto-switch

on, you must re-enter your PIN
code. The phone does not go into
power saving mode until you enter
your code. To activate the autoswitch:
1 Press . Select Office Tools.
2 Select Auto-switch.
3 Select Auto-switch-on.
4 Select On.
5 Enter the time you want the
phone to turn on and
press OK . Confirmation
appears.
6 Select Auto-switch-off.
7 Select On.
8 Enter the time you want the
phone to turn off and
press OK .
or
9 Press and hold Exit
to return to the stand-by display. The
icon appears in
the stand-by display.

The menu

to return to
4 Press Select or
the stand-by display.
appears.
The alarm sounds for up to
1 minute. Alarm clock and a vibrating bell symbol appear with the current time and the softkeys,
Valid.
and No ring
. During a
call, the alarm also sounds.
To stop the alarm:
Press Valid. .

To turn off the auto-switch:
1 Press . Select Office Tools.
2 Select Auto-switch.
3 Select Auto-switch-on.
4 Select Off. Stored appears.
5 Select Auto-switch-off.
6 Select Off. Stored appears.
or
7 Press and hold Exit
to return to the stand-by display.

Calculator
To access and use the calculator:
1 Press . Select Office Tools.
2 Select Calculator.
3 Enter a number and press
several times to choose +, -,
* or / or
to enter a ,.
4 Enter the second number and
either repeat step 3 or select
=
to compute. Select
Clear
to correct any mistakes or clear the display.
to return to the
5 Press
stand-by display.
45

Games
The availability and appearance of the
games depend on your network operator and on your mobile phone version
(Reshape and Push games are available
on Trium 110 and Trium 110 m only).

Reshape and Push:
Game instructions appear when
you select the game.
Select sound effects from the menu
item Options.
To select a game:
1 Press . Select Games.
2 Choose the game (Push or
Reshape) and press Select
or .
When in the game,
Item
Play

Help
Code

Action

Select Play to
start the game
(from the lowest
level).
Select Help for
instructions and
controls.
If you have
already played
the game and
reached a certain
skill level, select
Code to enter the
level code and
play the game
from that level.

Reshape and Push have skill levels.

When you win a level, you go to the
next level. After successfully playing
'X' number of levels the game gives
you a code to enable you to re-enter
the game from your previously attained skill level. The game can
record player names and scores. If
you receive a call while playing, answer in the normal way. To exit
from the games menu press Exit
46

or press
to return to the stand-by
display.
Receiving an incoming call while playing may not
allow you to resume the current game.

Trium 110 p games
The Trium 110 p Games menu allows the downloading of new
games onto your mobile. Up to 2
games can be stored in the phone.
One is a default one. You cannot
delete or replace this game.
The second game may not have
been downloaded in your phone; if
not, you can download it by choosing it from the Catalogue menu.
You can replace the second game
by another one from the catalogue
as many times as you want. The
Catalogue allows you to get the list
and description of the games you
can download. If the contents of
the catalogue is not available on the
phone it can also be downloaded.
All information related to games
downloading is available in the Instructions menu.
The Trium 110 p games menu is
made of the following sub-menus: Catalogue, News, Settings
and Instructions in addition to
the available game(s) name(s).
This phone version does not bear the Reshape and
Push games.

Catalogue

Action
Select Catalogue

to see and/or
download games
available on the
network.

Select News to
get information
on new games
availability.
Select Settings to
access the sound,
Settings
backlight... settings common to
all games.
Select Instructions for all inforInstructions mation related to
games downloading.
Receiving an incoming call while playing may not
allow you to resume the current game.
News

Currency-converter
To use the converter, set the currencies and the exchange rate:
1 Press . Select Currency.
2 Select Settings.
3 Enter the first currency name
(e.g. Dollar). Press OK .
Enter the second currency
name (e.g. Yen). Press OK .
4 Enter the exchange rate using
to enter a comma.
Press OK
to validate the
entry.
or
5 Press and hold Exit
to return to the stand-by display.
To use your Currency-converter as a Euro converter
for participating currencies in the European Monetary Union (“Euroland currencies”), please enter
the complete Euro exchange rate with six significant figures. For example: 1 Euro = £ 0.61871.
To calculate the conversion between the chosen currencies:
1 Press . Select Currency.

2 Select one of the two first
options.
In our example: either Dollar>Yen or Yen->Dollar.
3 Enter the amount to be converted. Press
to insert a
comma, if needed. Press
OK . The converted amount
appears.
or
4 Press and hold Exit
to return to the stand-by display.
Conversion from one Euroland currency to another,
or to non-Euroland currencies, normally follows
"triangulation" rules (i.e. conversion of local currency to Euro and then Euro to other local currency). Your Currency-converter does not provide
this possibility. Accordingly, your result is only a
close approximation.

The menu

Item

Internet/Wireless Application
Protocol (WAP™)
Your phone has a WAP™ internet
browser to access services, such as
stock buying, news, sports, weather, TV
listings etc., supplied by your operator
and/or your internet provider. The
types of services offered depend
on the internet provider and network operator.
You must have a DATA subscription to
access these services.
Either your phone is pre-programmed
with the settings or you must enter
them.
See below to enter the settings. If you
cannot access the settings, they are preprogrammed.
Access to the connection settings depend upon
whether the settings have been pre-programmed
prior to shipment from the factory. In some cases
and to avoid errors these settings are 'locked' and
are not user programmable.

Storing/editing connection settings
(operator provided)
You can enter up to 5 different profiles.
47

To enter and store the profile details:
1 Press . Select Internet.
2 Select Profile list.
3 Select an empty profile ([...])
and press Options .
4 Select Edit.
Enter the 4 digit phone lock
code (default code 0000) and
press OK .
5 Enter all settings (the settings
depend on your operator).
6 To activate the required profile, use or
to select it
from the displayed list.
Press Options
and select
Select to validate.
or
7 Press and hold Exit
to return to the stand-by display.
1. You can also access the Internet menu directly by
pressing the Internet softkey from the stand-by display (provided you have not personalised the left
softkey).

2.If the phone number, login names and password, Home page http address and IP address are
not predefined, get these from your network operator and/or internet provider.
Personalising your connection settings
Optimise the behaviour of your
phone while connected to the internet with the following settings:
1 Press . Select Internet.
2 Select Settings.
3 Scroll to the following items
and turn on or off as
required:

Option

Clear cache

Download
pictures

Scripting

Autodisconnect

Action

Clears the memory used to store
information that
you downloaded.
To clear this memory, select the Yes
option.
Select the Off option to reject picture
downloading.
This decreases the
page downloading time.
Used to allow or
forbid the execution of scripts
within a page.
Disconnects the
mobile from the
internet after a
set period of inactivity. Enter the
period (0 - 60
minutes) and
press OK .
0 deactivates the
auto-disconnect
function.

or
4 Press and hold Exit
to return to the stand-by display.

Going online
To go online:
1 Press . Select Internet.
2 Select Home page.
3 Connecting to followed by
your proxy name appears.
Then the word Loading... (of
the home page) appears.
Once connected, your provider specific menu options appear. The
icon indicates a 'live' circuit connection. By default the connection is
not secure.
To have a secure connection, set
’Security on’. The
icon indicates

Item

Action

Returns to the
Back
previous page
Increases or deZoom +/creases the displayed text size
Adds a current
Add bookcard to the list of
marks
bookmarks
Goes to a bookGo to
bookmarks
mark
Reloads the curReload
rent page
Reloads the home
Home page
page
Enter
a different
Other Site
site
Disconnects the
browser from the
Disconnect
network but
leaves the current
page locally active
Disconnects the
Close session phone from the
internet
The appearance of these items depends on the operator and/or values in the Settings menu.

Ending the online connection
To end the online connection:
Press .
You can also select Close session item under the
options menu.

Creating bookmarks
To revisit specific cards more quickly, use bookmarks to store the card
address. This function depends on
your provider. You can create a
maximum of 10 bookmarks. Create
bookmarks from the stand-by display or while viewing a page.

1 Press . Select Internet.
2 Select Bookmarks.
3 Press Options , select Modify and enter the following:
Option
Alias
Address

Action

Name you wish to
give to your bookmark
Home page address

to validate each
4 Press OK
entry.
or
5 Press and hold Exit
to return to the stand-by display.
During a live connection while
viewing page:
to display the
1 Press
options menu.
2 Select Add bookmark, enter
the Alias name and press
OK .
Bookmarks can only be Edited or Deleted from the
Bookmarks item under the Internet menu options
while offline.

The menu

a 'live' secure circuit connection.
Using
while online
Press
while online presents the
following options:

Using bookmarks
Bookmarks can be used from the
stand-by display or while browsing.
• Directly from the stand-by display:
1 Press . Select Internet.
2 Select Bookmarks.
3 Select the bookmark name
you require.
To access the Internet directly use the Internet softkey (if not personalised).
• While browsing the internet:
to display the
1 Press
options menu.
2 Select Go to bookmarks.
3 Select the bookmark name
you require.

Other site
You can enter another internet address directly by using the Other
49

site option from the Internet
menu. Addresses are not stored and
must be entered each time.

GSM man machine interface
codes
The phone supports the standard
GSM key sequences using the * and
# characters sent directly from the
keypad to the network. These sequences are used to activate all the
supplementary services provided by
the network. Consult your service
provider for a complete list.

Accessories
Using the headset
Connecting the headset

Using the headset
Place the headset earpiece in your
ear.
The headset microphone is then
at a convenient level for
operation.
You can answer, reject and end
calls using
or
(see page 11).
Adjust the earpiece volume level
using or .

Earpiece

Accessories

Insert the headset plug in the
phone headset connector as
shown:
While inserting the headset plug in the phone
headset connector make sure the Trium logo
(
) appears on top. Otherwise the headset
does not work properly.

Microphone

Disconnecting the headset
Tilt the headset plug down as
shown:

Appendix
Glossary
Expression

AC/DC charger
Active call
ALS
AoC
CB
CLI
Conversation
mode
DES
Diverting
DTC
EMS
DTMF
FDN
GSM
http
IN
IP
LCD
MMI

Meaning
Alternating Current/Direct Current charger
The call currently in conversation
Alternate Line (Line 2)
Service
Advise of Charge - subscription service
Cell Broadcast
Caller Line Identity - displays callers telephone
number
When the phone is making or receiving a call
Data Encryption standard
Diverts incoming calls to
the phone to another
number
Desk Top Charger
Enhanced Message
Service
Dual Tone Multifrequency Tones
Fixed Dialling Number
Global System for Mobile communications
HyperText Transfer Protocol
Information Numbers of
your operator
Internet Protocol
Liquid Crystal Display
Man machine Interface

Expression

Meaning
Personal Identification
Number. Supplied by
PIN/PIN2
your network/service
provider
PPP
Point to Point Protocol
PIN Unblocking Key.
Used to unlock PIN and
PUK/PUK2
PIN2. Supplied by your
network/service provider
The ability to use your
Roaming (Rm) telephone at home or
abroad.
Service Dialling
SDN
Number. Of your operator or service provider
Subscriber Identity
Module. Supplied by
SIM
your network/service
provider
SMS
Short Message Service
SPN
Service Provider Name
Status Report - relates
SR
to SMS messages
When the phone is on,
registered onto a netStand-by mode
work but not making or
receiving a call
Uniform Resource LocaURL
tor
Wireless Application EnWAE
vironment
Wireless Application
WAP™
Protocol
Wireless Session ProtoWSP
col
Wireless Transport ProWTP
tocol

Possible cause and solution
Check that the battery is
Phone will not
fully charged and correctly
switch on
connected to the phone.
There may be no mains
supply. Try a different electrical socket.
No flashing
The AC/DC charger may be
battery icon
faulty. Return to your dealwhile charger and try substitution
ing
with another Mitsubishi
adaptor. If faulty contact
your dealer.
Cell broadcast is permanently on, using more battery power.
Phone is in a poor signal
area and therefore always
Short standon full power.
by and talk
Incorrect charging and distimes
charging. Always charge
and discharge your battery
fully.
The battery is wearing out.
Replace the battery.
Numbers can- Keypad lock is on ( apnot be enpears). Press Unlock
tered
and
to turn off.
Check at least one signal
strength bar ( ) is displayed. Try a stronger signal strength area.
If no network name is displayed, check registration
Calls cannot
and area coverage with
be made or
your service/network proreceived
vider and check the SIM is
correctly inserted.
Call barring option is on.
Deactivate it (see page 42).
Call cost limit is reached
(see page 31).
Problem

Problem

Possible cause and solution

Stored telephone numbers cannot
be recalled

Fixed Dialled Number or
Call Barring features are
turned on. Check features
and turn them off (see
pages 25 and 42).

Phone
switches on
but there is
no display

Display contrast is turned
down too low. Reset contrast (see page 34).

May indicate a charging
or battery problem. Turn
Battery icon
the charger off and disnot flashconnect it. Reconnect and
ing 1-2-3
try again.
during chargMay also indicate the bating
tery is full and does not
need more charging.

Flashing

There is not enough memory to store another SMS
message. You must delete
one or more of the existing stored messages (see
page 26).

(......)
softkey

Function no longer available in the SIM or was subscription dependent.
Reprogram the softkey
(see page 34).

Appendix

Trouble shooting

Error messages
Problem

Possible cause and
solution

You are trying to place
an outgoing call and the
allowed credit is already
Allowed cred- reached.
it reached!
The allowed credit limit
is reached during an
outgoing call (the call is
then aborted).

Busy

You are trying to make a
call and the call fails because the destination
number is already engaged in conversation.

Call failed

The user is unreachable.
The outgoing call fails
due to:
the network cannot
take the call due to system busy or
the number is out of order or
the number is unreachable or
the network does not
answer or
the option to hide your
phone number when
calling is not supported
by the network
Control the ability to
hide your ID when making a call (service availability in network).

Cell broadcast activaCancelled. No tion has been requested
type selected but no message type
has been selected.

Problem

Possible cause and
solution

Cannot execute command

You have made a request which is impossible to be executed in
the current call situation.

Can't display
message

The short message text
cannot be displayed
(characters not recognised, incorrect format
etc.)

Check SIM!

There is no SIM present
or the SIM is incorrectly
inserted. See page 10
for more details.

Check your
password

You changed the call
barring password or
You changed the call
barring service status.
The entered password
seems to be wrong or
incorrect.

Check your
request

You made a request for
a service that seems to
be impossible to fulfil.

Check your
subscription

You tried to activate a
GSM service. You are requested to check your
subscription regarding
the related service
rights of use/access.

Error!

The network cannot
perform your request
and generates an error
result.

Failed

An SMS sending process
failed (the short message cannot be sent).

You entered a character
Incorrect enstring with a syntax ertry
ror.

Possible cause and
solution
When a copy/move operation is made on
No action per- memories but no conformed
ditions have been
changed (same memory, number and name).
You made a call to a remote user and no reNo response
sponse has been
received.
Your number/characNot allowed
ter entry is not allowed.
A call is tried, but cancelled due to fixed dialNot allowed
ling control (the
(fixed dialnumber dialled does
ling)
not match with one of
the fixed dialling numbers in memory).
There is no more SIM
Not Available
storage.
Number
The called number has
changed
changed.
A wrong PIN code has
PIN blocked
been entered 3 times.
A wrong PIN2 code has
PIN2 blocked
been entered 3 times.
A wrong PUK2 code
has been entered 10
times.
PUK2 blocked The SIM services protected by the PIN2 code
have now been permanently disabled.
Ring volume
The ring volume is set
Off
to 0 (no volume)
The cost limit is about
to be reached. The conReaching alnected call ends autolowed credit!
matically when the
limit is reached.
Problem

Appendix

Possible cause and
solution
You tried to make a call
and the call is rejected
by the network because the network
does not recognise the
phone number structure or
you tried to store a
Invalid
phone number that is
number
too long to be stored in
the selected location or
you tried to move a
phone entry to a location that is unable to
receive the phone
number (phone
number too long)
Keypad locked A press on any key is
"Unlock" # to made with keypad
unlock
locked.
This text appears when
the battery becomes
Low battery! too low and the mobile
soon switches off automatically.
You tried to make a
call. The call is rejected
Network busy
by the network due to
congestion problems.
When selecting network manual search,
Network not
you have selected a
allowed
network that rejects
the connection.
New PIN inChanging PIN: the new
correct. Try
PIN code values differ
again
(value control).
New PIN2 in- Changing PIN2: the
correct. Try
new PIN2 code values
again
differ (value control).
Problem

Problem

Possible cause and
solution

Service not
available

Activating some GSM
services that are not
available on the network

SIM blocked.
Contact provider

A wrong PUK has been
entered 10 times.
The SIM card has been
permanently disabled
and needs to be replaced by a new one.

SIM blocked.
Enter PUK:

A wrong PIN code has
been entered 3 times.
Enter the PUK code to
unblock the SIM card.

SIM fixed full
SIM names
full
Phone names
full

The corresponding
memory is full.

SMS memory
locations are
full

The storage of new
messages (when writing a new SMS) is impossible.

Wrong code.
Try again

A wrong phone lock
code has been entered.

Wrong new
code. Try
again

The new phone lock
codes do not match
(value control).

Wrong PIN,
try again
Wrong PIN2,
try again
Wrong PUK,
try again
Wrong PUK2,
try again

The wrong code has
been entered.

Message not
sent

The handset may be
out of the network
range or the network is
temporarily overloaded.

Problem

Possible cause and
solution

Internal fault

An unrecoverable error
has occurred. Switch
the handset off and
back on again. It may
be necessary to reset
the EMS system (Settings menu). Beware:
all services and EMS
messages will then be
erased.

Invalid Service Menu

An invalid service menu
has been sent to the
handset. The invalid
service menu is ignored, no further action necessary.

Registration
required

You have not registered to any service. Go
to the Service registration menu.

Menu limit
reached

A new service menu
item has been received
but the remaining storage space is not sufficient to store it. Delete
one or more registered
menu items (My Services menu) and accept
the new menu or discard the new menu.

Server limit
reached

A new service has been
received but the remaining storage space
is not sufficient to store
it. Delete one or more
registered service(s) Settings menu - and accept the new service or
discard the new service.

Pan European Service
Should you experience any difficulty then
please contact your nearest MITSUBISHI
location listed below for information on
other service centres.
UNITED KINGDOM
ESPAÑA
Tel: (0800) 912 00 20
Tel: (902) 11 68 58
FRANCE
ITALIA
Tel: (0825) 86 82 83
Tel: (800) 27 59 02
DEUTSCHLAND
IRELAND
Tel: (01803) 33 71 84
Tel: (1800) 92 70 12
BELGIUM
SWITZERLAND
Tel: (0800) 75733
Tel: 032 843 65 11
AUSTRIA
FINLAND
Tel: (0800) 292716
Tel: (0800) 116 975
PORTUGAL
SWEDEN
Tel: (0800) 880 264
Tel: (0200) 214 715
THE NETHERLANDS
Tel: (0800) 0223825

To obtain Warranty Service, you will require your original equipment purchase
invoice or irrefutable proof of purchase.
Please see warranty terms and conditions
for in warranty service.

Pan-european GSM End-user Guarantee Conditions
1.You can benefit from this guarantee only if
you are the original end-user purchaser.
2.MITSUBISHI guarantees that for a period of
twelve (12) months from the date of purchase from your dealer, the Product shall
be free from defects in materials and workmanship. Subject to the conditions below,
Mitsubishi will indemnify you against all
cost of parts and labour for repairs to or replacement of the product or parts (which
may include equipment of similar type)
where conducted by an authorised MITSUBISHI GSM service centre. MITSUBISHI
shall be entitled to retain product which
has been replaced.
3.Any claims must be made to an authorised
MITSUBISHI GSM service centre in the
countries mentioned in the service card enclosed with the product. In case of difficulty you can contact the Mitsubishi
companies listed in the service card to obtain details of your nearest authorised MITSUBISHI GSM service centre. As a condition
of this guarantee, the date of your purchase must be confirmed by producing
your original invoice from your supplier or
your sales receipt, showing the serial

number, together with the service card. Final determination of guarantee claim eligibility shall be made by MITSUBISHI.
MITSUBISHI shall not be liable for shipment costs to and from an authorised GSM
MITSUBISHI service centre; the product
travels at your risk.
4.This guarantee does not cover:
a)battery defects of any nature;
b)non-compliance with directions for use;
c)installation or removal charges where
the product is installed in a vehicle;
d)defects or failures caused by accident,
misuse, improper installation or improper repair by an unauthorized repairer, alteration or modification, neglect, failure
to use for normal purpose, Acts of God,
water ingress, use in adverse environmental conditions (humidity or temperature);
e)cost of or performance of modifications
to product to adapt or adjust to conform
to national or local safety laws, where
such safety laws go beyond harmonised
European Union standards;
f)loss of use of the product or consequential loss of any nature;
g)loss of use of air-time, loss of use of any
loaned equipment or ancillary equipment;
h)provision of incorrect or insufficient signal on air-time network, upgrading of
product software to changes in network
operating parameters, mains supply
voltage fluctuations, incorrect SIM card
(memory card) parameters for connection to airtime retailer;
i)damage caused by non-MITSUBISHI accessories.
5.Any guarantee claim or service does not
extend the original guarantee period unless so required by prevailing national law.
6.This guarantee is valid only if the product
is purchased and used in the European Union, Norway, Iceland or Switzerland.

Appendix

Guarantee

THIS GUARANTEE DOES NOT AFFECT YOUR
STATUTORY RIGHTS.

DECLARATION OF COMPLIANCE
Name
Address
Town
Postal code

: Mitsubishi Electric Telecom Europe S.A.
RCS Nanterre B 307 593 129
: 25, boulevard des Bouvets
: Nanterre Cedex
: 92741

Identification of the product
Nature
Type
Sales reference

: Mobile Cell Telephone
: Dual band GSM 900/DCS 1800
: MT-360

Declares under its entire responsibility that the product described above complies with the
following basic applicable requirements (and in particular those in the 1999/5/CE directive):
Article 3.1a: (health protection and user safety)
Declaration
73/23/CEE,
Cenelec EN 50361 of compliance
Article 3.1b: (protection requirements concerning electromagnetic compatibility)
89/336/CEE, ETS 300 342-1
Article 3.2: (proper use of the radio-electric spectrum so as to avoid damaging interference)
EN 301 511
To this effect, declares that all the radio test series have been carried out.

9th of January 2002,

Viet Mailam
Managing Director

Index

20
44
32
26
34
35
35
48
33
41
45

Backlight ............................. 15, 34
Balance information .................. 30
Barring password
Call ..................................... 42
Basic operations
SMS ................................... 15
Unanswered call ................. 15
Voice mail .......................... 15
Battery ...................................... 10
Alarm volume .................... 33
Charging ............................ 12
Disposal ............................... 6
Fitting ................................ 12
Low battery warning .......... 12
Removing ........................... 12
Safety information ............... 6
Use ....................................... 6
Battery cover
Replacing ........................... 10
Bookmarks
Creating ............................. 49
Deleting ............................. 49
Using ................................. 49
Broadcast .................................. 43
Alert ................................... 44
Language ........................... 44
Message types ............. 43, 44
On/Off ................................ 43

Cache memory
Clearing .............................. 48
Calculator .................................. 45
Call
Conference ......................... 19
Duration ............................. 31
Holding .............................. 18
Multi-party ......................... 19
Reminder ........................... 31
Retrieving ........................... 18
Times ................................. 30
Waiting .............................. 18
Call barring ............................... 42
Password .............................. 7
Call costs
Reset .................................. 32
Call timer
Reset .................................. 31
Caller line identity ..................... 39
Calling ....................................... 11
Calls & Times ............................. 29
Call costs ...................... 31, 32
Call timers .................... 30, 31
Calls log ............................. 29
Costs .................................. 31
Line selection ..................... 32
Calls Log .................................... 29
Care and maintenance ................ 5
CB ............................................. 43
CB messages
Deleting ............................. 44
Editing ............................... 44
Reading .............................. 43
Cell broadcast ........................... 43
CLI ............................................. 39
Conference call .......................... 19
Connection profile ..................... 47
Cost management ..................... 31
Country Codes ........................... 16
Creating a draft text .................. 27
Credit limit ................................ 31
Currency-converter .................... 47

Date setting ...............................
Default settings .........................
Dialling
Calls Log memory ...............
Phonebook .........................
Dialling from memory ...............
Display contrast .........................
Diverting ...................................
Draft text
Creating .............................
Editing ...............................
DTMF tones ...............................

37
37

Emergency calls ........................... 5
EMS ........................................... 29
Ending a call .............................. 12
Error messages .......................... 54

FDN ........................................... 25
Fixed dialling numbers .............. 25

General
Safety ................................... 4
Getting started .......................... 10
Glossary ..................................... 52
GSM man machine
interface codes ...................... 50
GSM Services ............................. 38
Call barring .................. 42, 43
Call diverting ...................... 39
Network ....................... 40, 41
Receiving caller ID .............. 40
Sending my ID .................... 40

Handsfree features .................... 17
Headset
Use ..................................... 51
Holding a call ............................ 18

Incoming Calls
Diverting ............................ 39
International Country Codes ...... 16
Internet ............................... 15, 47
Bookmarks ......................... 49
Going online ...................... 48
Home page ........................ 48
Other site ........................... 49
Personalising ...................... 48
Profile list ........................... 48
Settings ........................ 47, 48

Index

Access to the menus .................
Alarm
Clock ..................................
Alert mode ................................
Alert tone
Turning on/off ....................
Any key answer .........................
Auto
Answer ...............................
Retry ..................................
Auto-disconnect ........................
Automatic ramping ...................
Automatic search ......................
Auto-switch ...............................

Keypad lock ......................... 15, 32

Language selection .................... 32
Last dialled numbers ................. 16
Line 1 ................ 25, 29, 30, 32, 39
Line 2 .......... 25, 29, 30, 32, 38, 39

16
16
16
34
39
27
27
17

Making a call ............................. 11
Managing SMS messages .......... 26
Melodies ................................... 33
Melody download ..................... 38
Menu ........................................ 20
Access ................................ 20
Menu graphics .......................... 34
Menu map ................................ 20
Message templates ................... 28
Messages ............................ 15, 26
Alert ................................... 26
Draft texts .......................... 27
Inbox .................................. 26
Msg. Templates .................. 28
Outbox ............................... 28
Rich Messages .................... 29
Settings .............................. 26
Storage .............................. 29
Write new .................... 27, 28
Mobile number
Hiding ................................ 39
Showing ............................. 39
Multi-party call .......................... 19
Muting ...................................... 17

Network .................................... 40
Network services ....................... 22

Office Tools
Alarm clock ........................
Scratchpad .........................
Office tools ................................
Online connection .....................
Bookmarks .........................
Ending ...............................
Personalising ......................
Outbox ......................................
Own number .............................

45
44
44
48
49
49
48
28
25

Pause feature ............................ 18
Phone
Customising ....................... 32
Phone Book
Calling numbers ................. 24
Fixed Dialling ..................... 25
Free space .......................... 24
Own numbers .................... 25
Recall ................................. 24
Remaining .......................... 24
Store ............................ 23, 24
Viewing numbers ............... 24
Phone lock ................................ 36
Code .............................. 7, 36
Phone settings .......................... 32
Phonebook ................................ 22
PIN code .................................... 36
PIN/PIN2 codes ............................ 6
PIN2 code .................................. 36
Problems ....................... 54, 55, 56
Programmable
Softkeys ............................. 34
Speed dialling .................... 16
PUK code ................................... 37
PUK/PUK2 Codes ......................... 7
PUK2 code ................................. 37

Ramping .................................... 33
Reading an SMS message .... 26, 29
Receiving a call .......................... 12
Reminder - call time .................. 31
Responsibility .............................. 6
Retrieving a call ......................... 18
Ring ........................................... 33
Ring tone .................................. 33

T9 ..............................................
T9 text entry ..............................
Time & date ...............................
Time settings .............................
Trouble shooting .......................
Turning
Off .....................................
On ......................................

Safety information ...................... 4
Battery ................................. 6
Care and maintenance ......... 4
Emergency calls .................... 4
Responsibility ....................... 4
Security codes ...................... 4
Vehicle safety ....................... 4
Scratchpad ................................ 44
Scripting .................................... 48
Second call ................................ 19
Security ..................................... 35
Codes ................................... 6
Features ............................. 35
Sending an SMS message .......... 27
Settings ..................................... 32
Auto features ..................... 35
Broadcast ..................... 43, 44
Default settings .................. 37
Display ............................... 34
GSM Services 39, 40, 41, 42, 43
Internet .............................. 47
Keypad lock ........................ 15
Keys ............................. 34, 35
Language ........................... 32
Menu graphics ................... 34
Phone settings ....... 15, 32, 33
34, 35, 36, 37
Security ........................ 36, 37
Time & date ........................ 37
Tones ..................... 32, 33, 34
Voice Mail .......................... 38
Show costs ................................ 32
Silent ......................................... 33
Silent alert mode ....................... 17
SIM
Card ................................... 10
SIM card .................................... 14
SMS ..................................... 15, 26
SMS messages
Managing .......................... 26
Preparing your phone ........ 26
Reading ........................ 26, 29
Sending .............................. 27
Storing ............................... 28
Softkey programming ............... 34
Solutions ................. 53, 54, 55, 56
Speed dialling ...................... 16, 35
Standby display ......................... 11
Storage consumption ................ 29
Storing an SMS message ........... 28
Storing names and numbers ..... 22

20
21
37
37
53
12
10

Vehicle safety .............................. 4
Vibrate ...................................... 33
Vibrate & ring ............................ 33
Vibrate alert modes ................... 17
Vibrate then ring ....................... 33
Voice Mail
Alert ................................... 38
Call ..................................... 38
Number .............................. 38
Voice mail ................................. 38
Volume ...................................... 17
Adjustment ........................ 17
Alert mode ......................... 33
Conversation ...................... 33
Keys tones .......................... 33
Ring tone ........................... 33

WAP™ ....................................... 47

Austria
0800 292716

Germany
0800 1808133

Netherlands
0800 0223825

Belgium
0800 75733

Greece
00800 44131247

Portugal
0800 880264

Denmark
8088 1816

Ireland
1800 927012

Spain
9009 34497

Finland
0800 116975

Italy
800 791029

Sweden
0200 214715

France
0800 913080

Luxembourg
800 23 552

UK
0800 9120020

www.mitsubishi-telecom.com

FA9M078910-A

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Adobe FrameMaker - [F:\Manuels\GB\Trium 110\Trium 110 GB - FA9M078910-A.book]
Create Date                     : 2002:03:05 11:02:39
Title                           : 
Author                          : 
Producer                        : Acrobat PDFWriter 4.05 pour Windows NT
Modify Date                     : 2009:06:16 18:54:53+01:00
Page Count                      : 64
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools

Mitsubishi Trium 110 Operation Manual

Trium 110 - Operations Manual trium110_EN Free User Guide for Mitsubishi Mobile Phone, Manual

Navigation menu

Versions of this User Manual:

Views

Navigation