Mitsumi Electric Co DWMW015 Wireless LAN Module User Manual TWL HardwareManual LGA

Mitsumi Electric Co Ltd Wireless LAN Module TWL HardwareManual LGA

Users Manual 1

Names and Functions of Components (Front of TWL System / Functions of Each LED) Names and Functions of Components (Front of TWL System / Functions of Each LED) 04 05Names and Functions of Components ［TWL-001(EUR)］1 2 3 5 8 9 7 6 4 Front of the System TWL system LCD Screens [Upper screen and lower screen (Touch Screen)] 22 Page Displays game screens and other information. The brightness of the screens can be adjusted in 5 levels. The lower display (the Touch Screen) is touch sensitive and should only be operated with a Nintendo-licensed stylus. 05 Page Power Indicator LED / Recharge Indicator LED / Wireless Indicator LED Power/Reset Button Pressing this button when the system is turned off will turn the system on. Pressing this button when the system is turned on will reset the system. Pressing and holding this button [when the system is turned on] will turn the system off. Control Buttons [The +Control Pad, A, B, X, and Y Buttons, and START and SELECT] For connection of stereo headphones or a headset microphone (sold separately). When stereo headphones or a headset microphone is connected, sound will not be audible through the speakers. Audio Jack Speakers Microphone Used by games that use the microphone functionality. Inner Camera Used by games that use the camera feature and by the Photo Album software.(Photo Album       )23 Page SD Memory Card Slot For inserting SD Memory Cards (sold separately). 24 Page Functions of Each LED Indicates various system statuses, depending on the color of each LED, and whether these LEDs are solidly lit or blinking.Solid Yellow NOTE: If the power indicator LED is red, save your game quickly and charge [the battery]. If the battery runs out before you save, any unsaved data will be lost.Solid Blue Battery isbeing chargedSolid Blue Solid Red Remaining Battery Life: High Remaining Battery Life: Low Blinks Red Remaining Battery Life: Extremely Low Off Charging completeWhen communicationis enabledBlinks Yellow Data being sent Blinking blue or red indicates that the battery is in "Sleep Mode," in which the battery life is conserved.NOTE: If you play a game while the system is recharging, the recharge indicator LED may not always turn off once charging has completed. This is not a malfunction.NOTE: If the recharge indicator LED is blinking, there is a chance that the battery pack is not connected properly. Make sure it is connected properly.Wireless Indicator LED Lights up when the communications features are enabled for use.Recharge Indicator LED Lights up when the battery is being charged.Power Indicator LED Lights up when the power is turned on.00 Page Apps,00 Page Apps,
Names and Functions of Components (Back of TWL System / AC Adapter / Stylus) Names and Functions of Components (Back of TWL System / AC Adapter / Stylus) 06 071 2 3 5 8 9 7 6 4 ［WAP-002(EUR)］［TWL-004］Back of the System Battery Box Holds the battery pack. NOTE: Do not remove the battery cover except when removing the battery pack in order to recycle it. 23 Page TWL AC Adapter This is the TWL AC Adapter.TWL system TWL stylus A pen used to control [the system] by directly touching the Touch Screen.(Continued)22 Page Volume/Backlight Control This adjusts the volume and brightness (in 5 levels). AC Plug Plugs into an electrical outlet. DC Plug Plugs into the system's external extension connector. Control Buttons [L Button, R Button] Stylus Holder Always replace the stylus into the stylus holder when not in use. NOTE: Do not insert anything other than a TWL stylus into the stylus holder. Wrist Strap Attachment For attachment of commercially-available straps. DS Game Card Slot For loading TWL Cards, TWL-Compatible Cards, and Nintendo DS Cards. AC adapter connector Allows connection of the included AC Adapter. 20 Page External Camera Indicator LED This LED lights up when the outer camera is in use. Used by games that use the camera feature and by the Photo Album software. Outer Camera 00 Page Apps,00 Page Apps,
Health and Safety Information (Health Precautions: Warnings) Health and Safety Information (Health Precautions: Warnings) 08 09Health & Safety Information Be sure to adhere to the following guidelines to prevent the occurrence of fires or electrical shock.For your health and safety, pay particular attention to the following points regarding the use [of this product].Failing to follow cautions shown by this indicator could result in accidents causing injury or death due to fire, electrical shock, or other such causes.Failing to follow cautions shown by this indicator could result in death or serious injuries or damage.Failing to follow cautions shown by this indicator could result in injuries or damage to nearby household items caused by electrical shock or other such accidents.Failing to follow cautions shown by this indicator could result in the system or nearby household items becoming damaged.Symbols that [indicate] prohibited actions Symbols that encourage caution Prohibited DO NOT TOUCH DO NOT DISASSEMBLE Fire Electrical Shock Explosion Proper Use CAUTION WARNING DANGER Health Precautions (Be sure to read these) Follow the safety precautions Be sure to read this Instruction Booklet before use.If [the product] stopped working properly If [the product] does not work properly, see "Troubleshooting."Meanings of the Warning Indications Please be aware of the following warning indications If [the product] malfunctions - If you notice that a device is damaged, making strange noises or producing strange odors, or if the product is giving off smoke -Turn off the power immediately.NOTE: Touching it needlessly is dangerous, so be careful.If an AC adapter or accessory is connected, remove them from the system.Ask the Nintendo Repair & Maintenance Center ( ) to inspect [your product] right away.NOTE: DO NOT ATTEMPT REPAIRS BY YOURSELF UNDER ANY CIRCUMSTANCES.WARNING For your health, please play games in a well-lit room.When young children will be playing, have them play in a place where a parent or guardian can keep an eye on them.Avoid playing games when tired or for long periods of time. Doing so is not desirable for your health. Also take breaks appropriately while playing. We recommend breaks of 10 to 15 minutes for every hour of gameplay.Although extremely rare, there are people who experience temporary muscular seizures and/or losses of consciousness after being exposed to strong light, flashing light, or while watching a television screen. People who have experienced such symptoms should consult with a physician prior to use. If such symptoms occur during use, discontinue use immediately and seek the advice of a physician.Immediately stop playing if you experience such symptoms as dizziness, nausea, fatigue, motion sickness, or if you experience tired eyes, hands, arms, or otherwise feel discomfort or pain during use. If the discomfort continues, be sure to seek the advice of a physician. Ignoring these symptoms may result in long-term injury.If you are tired, or have existing conditions affecting your arms or hands for other reasons, playing games or other such activities may aggravate said conditions. In such cases, consult with a physician prior to use.Using stereo headphones at loud volumes for long periods of time could result in impaired hearing. When using headphones, keep the volume to a level that allows you to answer when spoken to. If you notice problems such as fatigue or ringing of the ears, discontinue use for the time being, and if the symptoms (ringing or otherwise) continue, be sure to have a doctor examine you.28 Page
Health and Safety Information (Usage Precautions: Dangers / Warnings) Health and Safety Information (Usage Precautions: Dangers / Warnings) 10 11Usage Precautions (Be sure to read these) The TWL system, AC adapter, and battery pack are precision equipment. Pay particular attention to the following regarding their use.WARNING Do not lick the battery pack terminals or short them with metal This could cause heat generation or explosion.Do not touch AC adapters or systems to which AC adapters are connected once it begins to thunder This could cause electrical shock due to lightning strikes.Do not place the stylus or the AC adapter plugs or cords in your mouth Be particularly careful to make sure young children or pets do not put [these parts] in their mouths. This could cause injury or malfunction.Do not drop, step on, or apply excessive force [to the product] [Doing so] could damage the displays, which in turn could cause injury. It could also damage the battery pack, causing it heat up and thereby leading to burns.If the battery pack is leaking fluid, do not touch the fluid Damage to your eyes could result if [battery] fluid were to enter your eye. [If this occurs,] flush your eyes immediately and thoroughly with water, and immediately have a doctor examine you.･If your hands or body come into contact with [battery] fluid, wash them thoroughly with water.･If [battery] fluid comes in contact with the system, wipe the system off, being careful not to get any fluid on your hands.・Do not throw [the product] into a fire or heat it up.・Do not use or store near a source of heat such as a stove or heater.・Do not dry using a stove, heater, dryer, or microwave oven.Do not throw [the product] into a fire or heat it up Be careful of the following with regard to use and storage locations. [Failing to adhere to these precautions] could cause the system's built-in battery pack to explode or cause fire, injury, or malfunction.Do not disassemble or modify [the product] Doing so could cause fires, leakage of the battery pack, heat generation, explosion, electrical shocks, or malfunction.Do not spill liquids or insert foreign objects Should any liquid (water, juice, oil, pet urine, etc.) or foreign object enter [the connectors or terminals], turn the power off immediately, unplug the AC adapter from the outlet, and contact the Nintendo Repair & Maintenance Center (-> p.xx).Continuing to use [the product] could result in fire, electrical shock, or malfunction.Do not touch connectors or terminals with fingers or metal This could cause electrical shock, injury, or malfunction.DANGER Use only official AC adapter and battery packs Do not use any devices with the TWL system (TWL-001(EUR)) other than the AC adapter (WAP-002 (EUR)) or the battery pack (TWL-003). Doing so could cause fires, leakage of the battery pack, heat generation, explosion, electrical shocks, or malfunction.Be careful when disposing The system and the AC adapter are made from plastic and metal parts. It may be dangerous to burn them, so when disposing of them, please follow the proper procedure as indicated by your local government. The system also contains a battery pack (rechargeable battery). When disposing of the system, remove the battery pack, and take it to the nearest recycling facility after having insulated it (do so by placing tape or other such material over the plus (+) and minus (-) terminals).28 Page
Health and Safety Information (Usage Precautions: Warnings) Health and Safety Information (Usage Precautions: Warnings) 12 13WARNING Use at least 22 cm away from place where cardiac pacemakers are implanted If someone with a cardiac pacemaker will be using wireless communications, keep [the product] at least 22 cm away from the site where the cardiac pacemaker is implanted. The signals may have an effect on the pacemaker’s operation.・ Do not jab it into people.・ Do not handle it violently (for example, do not bend it or press it forcefully into the Touch Screen).・ Do not use it for any purpose other than operating the Touch Screen.・ Do not use damaged or deformed styluses.Precautions about the stylus Be careful of the following issues. [Failure to do so]could result in injuries.Precautions about usage and storage locations Be careful of the following with regard to use and storage locations.・ Public transportation (trains, buses, etc.) and crowded places・ Other Countries・ Hospitals and Medical Facilities・ Within airplane cabinsAny use of the TWL system is prohibited during takeoff and landing.・ Use while driving or walking・ Use in hot places (under blankets, etc.)・ Use in places where usage is restricted or prohibited (such as in airplane cabins and hospitals)・ Storing in unstable places or places where infants or pets can reach・ Leaving [the system] exposed to direct sunlight or in tightly-sealed cars (particularly in the summer) for long periods of time・Use or storage in high-humidity places or places with high concentrations of dust or oily smoke(Continued) Precautions about the wireless communication functionality The use of wireless communication is prohibited or restricted in the following locations.Be sure to disable wireless communication from the system settings before using the TWL system in these locations.(How to change the settings )00 Page Apps,00 Page Apps,
Health and Safety Information (Usage Precautions: Warnings) Health and Safety Information (Usage Precautions: Warnings) 14 15WARNING ・ Do not use it in a way that applies excessive force to the cord (especially near the base of the cord).Precautions about the AC adapter For your safety, adhere to the precautions below. [Failing to do so] could lead to fire, electrical shock, abnormal heat generation, or malfunction.・ Do not use [the AC adapter] with anything other than the household power source for Japan (AC 100V).・ Do not step on, pull on, or forcefully bend the body or cord of the AC adapter.・ Do not use AC adapters that have bent AC plugs or damaged cords.・ Do not place the cord near stoves or heaters, and do not apply heat to the cord.・ Do not alter or damage the body or cord of the AC adapter.・ When storing [the AC adapter], do not wind the cord.(Continued) ・ Regularly use a dry cloth to wipe off any dust or other material adhering to the AC plug.・ When you will not be using [the AC adapter] for long periods of time, unplug it from the outlet.When unplugging it from the outlet, grab the body of the adapter and unplug it by pulling it straight out.・ When plugging the AC plug into an outlet, be careful not to let it come into contact with the metal parts of any metal straps or other accessories.・ Do not use the AC adapter in a way that exceeds the rating of the outlet or wiring device (for example, do not plug in too many devices into an outlet).・ If the AC adapter is on the verge of coming out of the outlet, there is a chance that a clip or other metal object could be dropped accidentally on the plug, shorting the [two terminals on the] plug. When plugging the AC adapter into an outlet, have the adapter's cord face downward, and insert the plug fully into the outlet. Plugging the adapter in upside-down makes it easier for the AC adapter to become unplugged.
Health and Safety Information (Usage Precautions: Cautions) Health and Safety Information (Usage Precautions: Cautions) 16 17CAUTION When opening and closing [the system], be careful not to let your fingers get pinched Be careful about this, as your finger could get pinched as shown in the figure, causing injury.Do not place it in pants pockets This could apply excessive force and break the screen and the system, causing injury and malfunction.Do not swing the system around by the wrist strap It could hit a person or object, causing injuries and malfunction.Cautions about the LCD screens The screen could crack if objects are thrown at the screens, if the screen is pressed with force, or if the system is dropped.In the event that the screen cracks, be absolutely sure not to touch the screen or any liquid that may have leaked from the screen.Be aware that if the screen cracks or the Touch Screen is damaged, the repair will have a fee associated with it, even if the system is still under warranty.Cautions about the Touch Screen Be careful of the following issues.This could cause injury or malfunction.・ Operation of the Touch Screen should only be done with the official stylus (TWL-004) or any other objects indicated by the game.・ Do not rub or press down on the Touch Screen forcefully.・ Be careful not to let sand, dirt, candy, or food particles fall onto the Touch Screen.・ If attaching a commercially-available protective sheet, read the instructions for the protective sheet thoroughly, and apply it correctly to keep dirt out and prevent air bubbles from forming.・ The upper screen is not a Touch Screen.Do not scrape or touch it with the stylus or other objects.・ Do not use with your fingernails.
Health and Safety Information (Usage Precautions: Proper Use) Health and Safety Information (Usage Precautions: Proper Use) 18 19Proper Use When the power indicator LED is lit or blinking, do not remove or insert Game Cards or accessories This could corrupt the save data or damage the system or its accessories.Do not place [the system] in places where condensation is likely to form due to sudden changes in temperature [Doing so] could cause malfunction. If condensation forms [on the system], turn the system off, and place it in a warm place until the water droplets dry up (keep it there for about one hour).Do not blow on the terminals of the system or Game Cards Damage could result if saliva lands on the terminals when you blow on [the system or Game Card].Do not wipe off with [paint] thinner, benzene, alcohol, or other such harsh substances [Doing so] could damage the plastic and cause the paint to peel.If the surface becomes dirty, soak a cloth in neutral detergent that has been diluted with water, wring out the cloth, wipe off the system, and then finish up by wiping it off with a dry cloth.Use only sturdy straps Weak straps could break, causing the system to fall and become damaged.Do not connect any accessories other than the designated ones Connecting accessories not indicated by the game or any devices not approved by Nintendo may result in permanent damage or malfunction.Use of the camera Under copyright law, images that are photographed using the TWL system's camera may not be used without permission of the right holders except for personal enjoyment. Furthermore, the use, alteration, or other such acts on likenesses or names of others may constitute infringement of portrait rights. Refrain from such usage. Be aware that there are circumstances such as demonstrations, performances, and exhibitions in which photography is restricted, even if the purpose is personal enjoyment.Using the TWL system's camera to engage in delinquent behavior that causes egregious harassment to the general public may be a punishable offense under laws and municipal ordinances (nuisance prevention ordinances, etc.).Precautions about the camera Do not expose the camera to direct sunlight for a long period of time, and do not directly photograph intense lights like the sun. [Doing so] could lead to malfunction of the camera or discoloration of the photographed images.Be careful about handling the camera, and avoid getting the camera dirty.If the camera gets dirty, wipe it off lightly with a soft, dry cloth.The camera is manufactured using extremely high-precision technology, but there are cases when the photographed images have certain dots that are always dim or bright. Understand that this does not indicate a defect or malfunction.Images photographed with the camera may be different from the actual objects in color or brightness.Be sure to fold the system closed when transporting or storing it Placing [the system] in a bag or backpack and then carrying it around or storing it while it is open could lead to malfunction, cause the LCD screens to crack, or cause the system to become scratched.Do not turn the power on and off without reason This could cause malfunction or the deletion of data.Do not move [the system] suddenly from a cold place to a warm place
Charging the Battery Charging the Battery 20 21Charging the Battery Charging the Battery Be sure to charge the battery before using the system for the first time, as well as when the system has not been used for a long time. Connect the DC plug of the AC adapter to the system's external extension connectorNOTE: Plug it straight in. It cannot be plugged in with the wrong orientation.Unplug the DC plug from the systemPull the AC plug out from the body of the AC adapter, and plug it firmly into an outletAfter charging the batteries, unplug the AC adapter from the outlet, and store the AC plug in the body of the AC adapterNOTE: If you play a game while the system is recharging, the recharge indicator LED may not always turn off when charging has completed. This is not a malfunction.1342Charging the battery The charge time is about 2 hours and 30 minutes It is possible to play games while the battery is charging, but this will cause the charge time to be longer than usual.NOTE: The charge time depends on the remaining charge in the battery pack.Charge [the battery] at least once every 6 months Charged battery packs will begin to discharge naturally, even without use. If they are not used for a long period of time, it may become impossible to charge them.Charge the batteries while the ambient temperature is between 5-40°C If the battery is charged outside of this temperature range, the battery pack may deteriorate and not be able to be charged. Also, if the ambient temperature is too low, it may not be possible to charge the battery pack fully.Can be recharged about 500 times Depending on the temperature and its characteristics, batter performance will decrease with repeated charge and discharge cycles. As time goes on, the usage time will gradually decrease, even with a full charge. As a rough approximation, the usage time will be about 70% of that of a brand-new battery after about 500 charge-discharge cycles.If you feel the usage time has dropped off noticeably, replace the battery pack Purchase a new battery pack from the nearest authorized Nintendo parts dealer. See page xx Pull straight out to unplug NOTE: If the recharge indicator LED is not lit, make sure the AC adapter is connected properly to both the system and the outlet.NOTE: If the recharge indicator LED is blinking, there is a chance that the battery pack is not connected properly. Make sure it is connected properly. 25 Page
Adjusting the Volume/Screen Brightness / Using SD Memory Cards Adjusting the Volume/Screen Brightness / Using SD Memory Cards 22 23Using SD Memory Cards How to Insert [an SD Card] How to Remove [an SD Card] Using an SD Memory Card makes it possible to copy the following types of data saved in the system memory. ? Built-in software and the associated save data? Downloadable software and the associated save dataNOTE: It may not be possible to copy some software.NOTE: Data copied to SD Memory Cards cannot be used on other systems.Remove the SD Memory Card slot coverInsert an SD Memory Card in the SD Memory Card slotNOTE: Confirm the insertion direction, and insert the card firmly until it makes a clicking sound.Push the SD Memory Card until it makes a clicking soundGrab the protruding part with your fingers and remove the card, then close the SD Memory Slot coverNOTE: Do not remove an SD Memory Card while loading or copying data.Adjusting the Volume / Screen Brightness If the upper portion of the volume/backlight control is pressed, the volume will increase. If the lower portion is pressed, the volume will decrease. Furthermore, if the lower portion of the switch is held while the power is turned on, the system will start up with the volume set to the minimum level. NOTE: When the system is in Sleep Mode, the volume can be decreased but not increased. If the upper portion of the volume/backlight control is pressed while SELECT is being held, the screen will become brighter. If the lower portion of the volume/backlight control is pressed while SELECT is being held, the screen will become dimmer. The screen brightness can also be adjusted via the system settings on the TWL menu.NOTE: Making the screen brighter will increase the power consumption. As a result, the power indicator LED will sometimes change from blue to red when the screen brightness is increased. In a worst-case scenario, the power indicator LED could change from blue to red, the battery could run out very quickly, and the power would turn off. Please be aware of this [possibility]. Making the screen brighter will shorten the battery endurance time.Lowering the brightness will lengthen the battery life and let you play games for longer periods of time. Adjust the brightness to suit your preference. For details, see When adjusting the volume When adjusting the screen brightness 28 Page 05 Page Apps,Cautions if using miniSD Cards or microSD cards If using a miniSD Card or microSD Card, use an "SD Card adapter" that supports the the card you are using.If a miniSD Card or microSD Card is inserted directly in the SD Card slot, it may not be able to be removed, and can lead to malfunction.1122Volume/Backlight Control Volume: High Volume: Low Volume/Backlight Control Screen Brightness: Bright Screen Brightness: Dim The link between screen brightness and battery life While pressing
Replacing the Battery Pack Replacing the Battery Pack 24 25Replacing the Battery Pack Replacement battery packs can be purchased from authorized Nintendo parts dealers.Contact your nearest authorized Nintendo parts dealer (-> p.xx).How to Replace the Battery Pack Replacing the Battery Pack NOTE: Use a screwdriver that is appropriate for the screw.NOTE: Be sure to replace the battery cover before resuming use.If [the product] is used while the battery cover is removed, impact could damage the battery pack or cause fires or explosions.Loosen the Phillips-head (+) screw on the battery cover with a screwdriver, and remove the battery cover1Lithium-Ion Battery Take to a recycling facility after use; do not throw away Turn the power off and be sure to unplug the AC adapter.The battery pack uses lithium-ion batteries. Lithium-ion batteries contain valuable resources. Take battery packs that you no longer need to the nearest recycling facility after having insulated them by placing tape or other such material over the plus (+) and minus (-) terminals.Orient the new battery pack as shown in the figure and place it in the system3Remove the battery pack as shown in the figure2A parent or guardian should replace [the battery pack] if a young child is using [the system].Replace the battery cover and tighten the screws4
Specifications (TWL System) Specifications (TWL AC Adapter / TWL Stylus) 26 27Specifications TWL system Model Number LCD Screens Screen Size Number of Pixels Power Sources Used Wireless Frequency Output Power (Antenna Power) Communication Standard Recommended Communication Distance Camera Feature Clock Feature Input/Output Terminals Maximum Power Consumption Temperature Range for Usage Humidity Range for Usage Dimensions Weight Charge Time Battery Life TWL-001(EUR)Transmissive TFT Color LCD (can display 260,000 colors)3.25" (49.5 mm high × 66.0 mm wide)192 pixels high × 256 pixels wideAC Adapter (WAP-002 (EUR))Battery Pack (TWL-003)2.4 GHz BandTBDIEEE 802.11b/g (DSSS/OFDM)Approx. 10-30 mLens: Fixed focal length Image Sensor: CMOSNumber of effective pixels: Approx. 300,000Max. Daily Variation of ±4 seconds (when used within the temperature range for usage)Game Card slot, SD Memory Card slotexternal extension connector, audio jackApprox. 2.8 W (when charging)5-35°C20-80%74.9 mm high × 137.0 mm wide × 18.9 mm thick (when closed)Approx. xxx g (including battery pack and stylus)Approx. 2 hours and 30 minutesThe battery life will change depending on the brightness of the LCD screens.For details, refer to the Battery Life Chart.NOTE: The [maximum] distance at which communication is possible may be reduced depending on the surroundings. Battery Life ChartNOTE: The system is configured to the "High Brightness" setting when shipped from the factory.NOTE: The battery time will also vary depending on factors such as the game being played, the usage of wireless communications features, and the ambient temperature. As such, these times should only be taken as rough estimates.Battery Life LCD Screen Brightness Low Brightness Medium Brightness Lowest Brightness Highest Brightness High Brightness Approx. x-x hours Approx. x-x hours Approx. x-x hours Approx. x-x hours Approx. x-x hours NOTE: Some of the specifications may change without notice to make improvements.TWL AC Adapter Model NumberInput / OutputDimensions / WeightCord LengthWAP-002（EUR）AC 230V 50Hz 12VA / DC 4.6V 900mAxx.x mm long × xx.x mm wide × xx.x mm thick / Approx. xx gApprox. 1.9 mTWL stylus Model NumberMaterialDimensions / WeightTWL-004Plastic parts ( Stylus body (ABS) / Stylus tip (PE) )Approx. 92.0 mm / Approx. 1.7 gThis product uses the LC Font by Sharp Corporation, except some characters. LCFONT, LC Font and the LC logo mark are trademarks of Sharp Corporation.This product includes RSAR BSAFE™ Cryptographic software from RSA Security Inc. RSA is a registered trademark of RSA Security Inc. BSAFE is a registered trademark of RSA Security Inc. in the United States and/or other countries. © 2005 RSA Security Inc. All Rights Reserved. Powered by Devicescape Software. Portions of this products are © 2003-2007 Devicescape Software, Inc. All rights reserved. Copyright © 2003-2008, Jouni Malinen <j@w1.fi> and contributors. All rights reserved. Copyright © 2006-2007, Christophe Devine. All rights reserved. WPA Supplicant, XySSL licensed pursuant to BSD License. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Cautions about the LCD screens The LCD screens are manufactured with extremely precise technology, but due to the properties of the crystalline liquid, there may be cases when some pixels are not lit or are always lit. There may also be cases when the brightness of the backlight is uneven. Understand that these issues do not indicate defect or malfunctions.The liquid crystal of the upper screen and the lower screen have different specifications, so there may be slight differences in the brightness of the backlights or the color of the screens. Understand that this does not indicate a defect or malfunction.・・

Navigation menu