Mitsumi Electric Co DWMW314K WIRELESS LAN + BLUETOOTH MODULE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3221385
Application ID	/vuOe8tBSW6o15zw6dwgWg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.5kB (256230 bits)
Date Submitted	2016-12-08 00:00:00
Date Available	2017-06-07 00:00:00
Creation Date	2016-10-26 13:24:18
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2016-10-26 13:24:18
Document Title	Microsoft Word - DWM-W314K_User Manual for FCC-0.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	605029

User Manual
WIRELESS LAN + BLUETOOTH MODULE
MODEL DWM-W314K
The purpose of this manual is to explain correct way how to integrate module DWM-W314K to
the end product. It includes procedures that shall assist you to avoid unforeseen problems.
This manual presents information that shows how module and OEM product, where module
integrated,complies with regulations in certain regions. Any modifications, not expressly approved
by the manufacturer could void the authority to operate in these regions.
The wireless LAN + Bluetooth module, model DWM-W314K has to be installed and used in
accordance with the technical description/installation instructions provided by the manufacturer.
For detail information concerning type approval of this module (e.g. where this module is already
pre-approved) please contact the authorized local distributor or the manufacturer.
The system may only be implemented in the configuration that was authorized.
Note that any changes or modifications to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
Regulatory Information
Operational Information
Wireless Interoperability
The end product integrating this module is designed to be interoperable with any wireless LAN and
Bluetooth product that is based on direct sequence spread spectrum (DSSS) ,orthogonal frequency
division multiplexing (OFDM) ,Frequency Hopping Spread Spectrum (FHSS) and radio technology
and to comply with the following standards.
･IEEE Std 802.11b Standard on 2.4GHz Wireless LAN
･IEEE Std 802.11g Standard on 2.4GHz Wireless LAN
･IEEE Std 802.11n Standard on 2.4GHz Wireless LAN
･Bluetooth V4.0 Standard
Federal Communications Commission (FCC) Statement
15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
15.21: You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
Labeling:
Wireless LAN + Bluetooth module DWM-W314K labeled as below.
FCC ID: EW4DWMW314K
The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when
the module is installed into the system, “Contains FCC ID:
EW4DWMW314K” shall be placed on the outside of final host system
Instructions to OEM Integrators
A User manual provided to the end user must indicate the operating requirements and conditions
that must be observed to ensure compliance with the above-mentioned FCC RF Exposure
guideline.
If this module is intended for use in a portable device, integrators are responsible for separate
evaluation and/or approval to satisfy FCC RF Exposure requirements.
The antenna used this module is as follows;
Antenna Type: PCB printed antenna
Antenna Gain: -4.7dBi
If an antenna with higher gain or new antenna type is used with this module, integrators must
contact to manufacture for additional testing and submission to the FCC.
If other radio devices are to be integrated with this module, an additional evaluation and FCC
submission may be required. Integrators are responsible for such additional evaluation and FCC
submission.
Notice.
Since this module is not sold to general end users directly, there is no user manual of module.
For the details about this module, please refer to the specification sheet of module.(Next Page)
This module should be installed in the host device according to the interface specification
(installation procedure).
This module built-in use in equipment.
If you do not include the module to the equipment,only be operated by “TX continue” and
“RX continue” stand alone mode separated.
MODULE SPECIFICATION
Contents.
No.
Item
Product summary
1-1
Scope
1-2
General explanation
Hardware specification
2-1
Block diagram
2-2
Environmental condition
2-3
Power supply
Electrical characteristics
3-1
Channel plan
3-2
Power Sequence
3-3
Interface specification
3-4
Current consumption
3-5
WLAN Reciever characteristics
3-6
WLAN Transmitter characteristics
3-7
Bluetooth Reciever characteristics
3-8
Bluetooth Transmitter characteristics
Mechanical specification
4-1
Dimension
4-2
Weight
4-3
Terminal number and name
4-4
Module Overall Appearance
Revision
1.Product Summary
1-1.Scope
IEEE802.11.b/g/n 2.4 GHz WLAN and Bluetooth 4.0 + LE module with integrated antenna
1-2.General explanation
・Weight
0.5g typ
・Chipset
Marvell.88W8777(WLCSP Package)
・Host Interfase
SDIO ver2.0
1-2-1.WLAN
・Standard
IEEE802.11b/g/n
・Frequency
2.4-2.4835GHz
・Frequency Bandwidth
20MHz
・Modulation Types
DBPSK, DQPSK and CCK with 802.11b mode
OFDM(BPSK, QPSK, 16-QAM and 64-QAM) with 802.11g/n mode
・Data rate
1,2,5.5Mbps and 11Mbps with 802.11b mode
6,9,12,18,24,36,48Mbps and 54Mbps with 802.11g mode
MCS0-7 with 802.11n mode
1-2-2.Bluetooth
・Standard
Bluetoorh V4.0
・Frequency
2.4-2.4835GHz
・Host Interfase
SDIO ver2.0
・Frequency Bandwidth
1MHz(BDR/EDR),2MHz(LE)
・Modulation Types
GFSK,PI/4-DQPSK,8DPSK
・Data rate
1,2,3Mbps
2.Hardware Specification
2-1. Block diagram
2-2.Environmental condition
1) Operating environment
70 ℃ ※Temperature on the bottom of the module
Operating temperature range
-20 ～
Operating humidity range
20%～80%
(None dew)
2) Storage environment
Storage temperature range
-30 ～
Storage humidity range
20%～85%
2-3.Power supply
Item
Min.[V]
TYP．
Max.[V]
VDD33
2.97
3.30V
3.63
85 ℃
(None dew)
3.Electrical Characteristics
3-1.Channel Plan
IEEE802.11b/g/n
CH ID
Freq.[MHz]
CH ID
Freq.[MHz]
CH ID
Freq.[MHz]
2412
2437
11
2462
2417
2442
2422
2447
2427
2452
2432
10
2457
IEEE802.15(Bluetooth BDR/EDR)
CH ID
Freq.
CH ID
Freq.
CH ID
Freq.
CH ID
Freq.
2402MHz
21
2423MHz
42
2444MHz
63
2465MHz
2403MHz
22
2424MHz
43
2445MHz
64
2466MHz
2404MHz
23
2425MHz
44
2446MHz
65
2467MHz
2405MHz
24
2426MHz
45
2447MHz
66
2468MHz
2406MHz
25
2427MHz
46
2448MHz
67
2469MHz
2407MHz
26
2428MHz
47
2449MHz
68
2470MHz
2408MHz
27
2429MHz
48
2450MHz
69
2471MHz
2409MHz
28
2430MHz
49
2451MHz
70
2472MHz
2410MHz
29
2431MHz
50
2452MHz
71
2473MHz
2411MHz
30
2432MHz
51
2453MHz
72
2474MHz
10
2412MHz
31
2433MHz
52
2454MHz
73
2475MHz
11
2413MHz
32
2434MHz
53
2455MHz
74
2476MHz
12
2414MHz
33
2435MHz
54
2456MHz
75
2477MHz
13
2415MHz
34
2436MHz
55
2457MHz
76
2478MHz
14
2416MHz
35
2437MHz
56
2458MHz
77
2479MHz
15
2417MHz
36
2438MHz
57
2459MHz
78
2480MHz
16
2418MHz
37
2439MHz
58
2460MHz
17
2419MHz
38
2440MHz
59
2461MHz
18
2420MHz
39
2441MHz
60
2462MHz
19
2421MHz
40
2442MHz
61
2463MHz
20
2422MHz
41
2443MHz
62
2464MHz
IEEE802.15(Bluetooth LE)
CH ID
Freq.
CH ID
Freq.
2402MHz
21
2444MHz
2404MHz
22
2446MHz
2406MHz
23
2448MHz
2408MHz
24
2450MHz
2410MHz
25
2452MHz
2412MHz
26
2454MHz
2414MHz
27
2456MHz
2416MHz
28
2458MHz
2418MHz
29
2460MHz
2420MHz
30
2462MHz
10
2422MHz
31
2464MHz
11
2424MHz
32
2466MHz
12
2426MHz
33
2468MHz
13
2428MHz
34
2470MHz
14
2430MHz
35
2472MHz
15
2432MHz
36
2474MHz
16
2434MHz
37
2476MHz
17
2436MHz
38
2478MHz
18
2438MHz
39
2480MHz
19
2440MHz
20
2442MHz
3-2.Power Sequence
Recommended power on timing
T0≧ 750ms., T1≧ 4ms., T2 ≧ 0ms., T3 ≧ 250ms
Recommended power off timing
T4≧ 0ms
3-3. Interface specification (SDIO)
3-3-1.Internal VIO Output Voltage
Item
Min.[V]
TYP.[V]
Max.[V]
VIO
1.78
1.80
1.82
3-3-2. I/O Ratings
Min.[V]
Typ.[V]
Max.[V]
Input high voltage
0.8*VIO
VIO+0.3
Input low voltage
-0.3
0.3*VIO
Input hysteresis
0.15
Output high voltage
VIO-0.4
Output low voltage
0.4
3-3-3.SDIO Protpcol Timing Diagram - Normal Mode
3-3-4.SDIO Protpcol Timing Diagram - High Speed Mode
3-3-5. SDIO Timing Data
Symbol
Parameter
Mode
Min
Typ.
Max
fpp
Clock Frequency
Normal
25 [MHz]
High Speed
50 [MHz]
Normal
10 [ns]
High Speed
7 [ns]
Normal
10 [ns]
High Speed
7 [ns]
Normal
5 [ns]
High Speed
6 [ns]
Normal
5 [ns]
High Speed
2 [ns]
Twl
Clock Low Time
Twh
Clock High Time
Tisu
Input Setup Time
Tih
Input Hold Time
Todly
Output Delay Time
Toh
Output Hold Time
High Speed
2.5 [ns]
3-4. Current consumption
3-4-1.WLAN Upload @ STA Mode
Condition
Data rate
Typ.[mA]
Max[mA]
11b 12dBm
11Mbps
310
380
11g 12dBm
54Mbps
260
330
11n 2dBm
HT20 MCS7
270
340
Disabled Bluetooth
3-4-2.WLAN Download @ STA Mode
Condition
Data rate
Typ.[mA]
Max[mA]
11b 12dBm
11Mbps
170
210
11g 12dBm
54Mbps
170
210
11n 12dBm
HT20 MCS7
190
230
Disabled Bluetooth
@STA Mode
Upload
14 [ns]
Download
Measure Point
3-4-3.Bluetooth Tx Mode
Condition
Typ.[mA]
Max[mA]
BDR/EDR
41
45
LE
31
35
Disabled WLAN
3-4-4.Bluetooth Rx Mode
Condition
Typ.[mA]
Max[mA]
BDR/EDR
33
36
LE
28
31
Disabled WLAN
@Connection Event
Tx Measure Point
Rx Measure Point
3-4-5. Power Save Mode
WLAN
Bluetooth
Typ.[mA]
Max[mA]
Remarks
DTIM=1
6.0
9.0
Disabled
DTIM=3
2.0
4.0
Bluetooth
Deep Sleep
0.5
0.8
Pdn
0.1
0.2
Deep Sleep
0.8
1.2
Disabled WLAN
3-5. WLAN Receiver characteristics
3-5-1.Minimum Receiver Sensitivity
Standard Data rate
802.11b
802.11b
802.11n
Min.[dBm]
Typ.[dBm]
Max.[dBm] PER[%]
1 Mbps
-93
-80
2 Mbps
-90
-80
5.5 bps
-88
-76
11 Mbps
-86
-76
6 Mbps
-86
-82
10
9 Mbps
-85
-81
10
12 Mbps
-84
-79
10
18 Mbps
-82
-77
10
24 Mbps
-79
-74
10
36 Mbps
-76
-70
10
48 Mbps
-71
-66
10
54 Mbps
-70
-65
10
MCS0
-86
-82
10
MCS1
-83
-79
10
MCS2
-81
-77
10
MCS3
-78
-74
10
MCS4
-74
-70
10
MCS5
-70
-66
10
MCS6
-68
-65
10
MCS7
-67
-64
10
3-5-2.Maximum Receiver Sensitivity
Standard
Data rate
Min.[dBm]
Typ.[dBm]
Max.[dBm] PER[%]
802.11b
1,2Mbps
-4
5.5,11Mbps
-10
10
802.11g
6 to 54Mbps
-20
10
802.11n
MCS0 to 7
-20
10
3-6. WLAN Transmitter Characteristics
3-6-1. Output Power
Item
2412MHz
2442MHz
2462MHz
11b
12.0 dBm
12.0 dBm
12.0 dBm
11g
12.0 dBm
12.0 dBm
12.0 dBm
11n
12.0 dBm
12.0 dBm
12.0 dBm
Typ.
Max.
3-6-2.Output Power Torelance
Item
Min.
Torelance
-2.5dB
2.5dB
3-6-3.EVM
ITEM
rate
EVM [%]
11b
1 Mbps
35
11b
2 Mbps
35
11b
5.5 Mbps
35
11b
11 Mbps
35
11b
6 Mbps
56.2
11g
9 Mbps
39.8
11g
12 Mbps
31.6
11g
18 Mbps
22.4
11g
24 Mbps
15.8
11g
36 Mbps
11.2
11g
48 Mbps
7.9
11g
54 mBps
5.6
11n
MCS0
56.2
11n
MCS1
31.6
11n
MCS2
22.4
11n
MCS3
15.8
11n
MCS4
11.2
11n
MCS5
7.9
11n
MCS6
5.6
11n
MCS7
4.0
3-6-4.Frequency Accuracy
Item
Min.[ppm]
Typ.
Max.[ppm]
Ta = 25 deg.
-10
+10
Ta = 0 to 70 deg.
-20
+20
3-6-5.Spectrum Mask
Mask [dBr]
DS
0MHz to +/-11MHz
DS
f+/-11MHz to 22MHz
-28
DS
f+/-22MHz
-50
OFDM 0MHz to +/-9MHz
OFDM f+/-11MHz
-20
OFDM f+/-20MHz
-28
OFDM f+/-30MHz
-40
HT20
0MHz to +/-9MHz
HT20
f+/-11MHz
-20
HT20
f+/-20MHz
-28
HT20
f+/-30MHz
-45
3-7.Bluetooth Reciever Characteristics
3-7-1. Basic Data Rate (BDR)
Item
MIN.
Frequency
TYP.
MAX.
2402MHz
Sensitivity
BER=0.1%
Maximum Input level
2480MHz
-90dBm
-70dBm
-20dBm
3-7-2. Enhanced Data Rate (EDR)
Item
MIN.
EDR Sensitivity BER=0.1%
TYP.
MAX.
PI/4DQPSK
-90dBm
-70dBm
8DPSK
-90dBm
-70dBm
EDR BER Floor Sensitivity
EDR Maximum Input level
-60dBm
BER=0.1%
-20dBm
3-7-3. Low Energy (LE)
Item
MIN.
Sensitivity
PER=30.8%
Maximum Input level
PER=30.8%
-10dBm
TYP.
MAX.
-87dBm
-70dBm
3-8.Bluetooth Transmitter Characteristics
3-8.1.Basic Data Rate(BDR)
MIN
Transmit Frequency
Output Power
Initial Carrier Frequency Tolerance
TYP
2402MHz
MAX
2480MHz
-6
-75KHz
75KHz
1: DH1 packet
-25KHz
25KHz
2: DH3 packet
-40KHz
40KHz
3: DH5 packet
-40KHz
40KHz
400Hz/uS
1: ⊿f1 AVG
140KHz
175KHz
2: ⊿f2 MAX
115KHz
Carrier Frequency Drift
4: Maximum Drift Rate
Modulation Characteristics
3: f2 AVG/f1 AVG
0.8
3-8.2.Enhanced Data Rate(EDE)
MIN
EDR Relative Transmit Power
TYP
-4dB
MAX
1dB
EDR Modulation Accuracy
1: RMS DEVM π/4DQPSK:
20%
2: RMS DEVM 8DPSK
13%
3: 99% DEVM π/4DQPSK
30%
4: 99% DEVM 8DPSK
20%
5: PEAK DEVM π/4DQPSK
35%
6: PEAK DEVM 8DQPSK
25%
7: Differential Phase Encoding
1%
EDR Carrier Frequency Stability
1: wi(GFSK part)
-75KHz
75KHz
2: wo(PSK part)
-10KHz
10KHz
3: wi+wo(PSK part)
-75KHz
75KHz
3-8.3. Low Energy (LE)
LE Transmit Power
MIN
TYP
MAX
-6dBm
LE Modulation Characteristics
1: ⊿f1 AVG
225KHz
275KHz
2: ⊿f2 MAX
185KHz
0.8
3: f2 AVG/f1 AVG
3-8.4. Tolerance of Transmit Power (BDR/LE)
MIN
Torelance
TYP
MAX
-4.0dB
4.0dB
4.Mechanical Specifications
4-1. Dimension : 9.0mm×19.5mm, t= 1.6mm MAX
4-2. Weight : Typical 0.5g
4-3. Terminal number and name
No.
Name
Type
Function
Pdn
IN
Power on
VIO
POWER
I/F power supply
SD_CMD
IO
SDIO command
SD_D0
IO
SDIO data 0
SD_D1
IO
SDIO data 1
GND
GND
GND
SD_CLK
IO
SDIO clock
GND
GND
GND
SD_D3
IO
SDIO data 3
10
SD_D2
IO
SDIO data 2
11
GND
GND
GND
12
VDD33
POWER
Main power supply 3.3V
13
VDD33
POWER
Main power supply 3.3V
14
HostWakeup OUT
4-4. Module Overall Appearance
reset
Host Wake up
5.Revision
REV
Contents
Date Name

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Format                          : application/pdf
Creator                         : 605029
Title                           : Microsoft Word - DWM-W314K_User Manual for FCC-0.docx
Create Date                     : 2016:10:26 13:24:18+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:10:26 13:24:18+09:00
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Document ID                     : uuid:56aef814-87d2-4fa7-b74f-96bfac2e2c62
Instance ID                     : uuid:8616e451-765d-4bd1-9b1a-8a4517b44b71
Page Count                      : 19
Author                          : 605029

EXIF Metadata provided by EXIF.tools