Mitsumi Electric WML-C10XX Bluetooth module User Manual functional description
Mitsumi Electric Co., Ltd. Bluetooth module functional description
functional description
Functional Description 20/May/2002 MITSUMI Bluetooth Module “ WML-C09###” “ WML-C10###” Hardware: Version 1 Ultra-small and thin size achieved through use of high density mounting technology. 1. APPLICATIONS Notebook PCs, mobile phones, digital cameras, PC peripherals, PDA. 2. DESCRIPTIONS Wireless communication module conforming to Bluetooth Ver.1.1. 3. FEATURES 1) Ultra-small and thin size achieved through use of high density mounting technology. 2) SMD type can be surface mounted. 3) High sensitivity supports communications of up to 1 0 m. 4) UART, USB and PCMIF interfaces enable wide range of applications. 5) Conforms to FCC, CE and other countries’ EMI standards. 6) Supports Bluetooth Class2. Note) The BLUETOOTH trademarks are owned by Bluetooth SIG, INC.,U.S.A. 4. SPECIFICATIONS Item Frequency ModulatIon Channel intervals Number of channels Power supply voltage Transmission rate Receive sensitivity Output level (Class2) SpecIfIcatIons 2402 to 2480 MHz FHSS / GFSK 1 MHz 7 9 CH 3.3 V (typ.), 2.8 ~ 3.4V 7 2 1 kbps -80 dBm typ. 4 dBm max. TM ©1998-2000 MITSUMI Electronics Corp. All rights reserved. MITSUMI is a trademark of MITSUMI Electronics Corporation. Other company names and products names are trademarks of their respective companies. Product specifications are subject to revisions or changes without notification. 5. TERMINAL DESCRIPTION 5-1. WML-C09### No. Symbol I/O Description GND Ground VDD1 SPI_MISO Voltage monitor (+1.8V) when voltage regulator is integrated, or Supply voltage 1.8V Synchronous Serial Interface data output SPI_CSB Chip select for Synchronous Serial Interface SPI_CLK Synchronous Serial Interface Clock SPI_MOSI Synchronous Serial Interface data input VDD2 Supply voltage 3.3V GND Ground UART_CTS Asynchronous serial data CTS 10 UART_RTS Asynchronous serial data RTS 11 UART_TX Asynchronous serial data output 12 UART_RX Asynchronous serial data input 13 PCM_CLK I/O Synchronous PCM data clock 14 PCM_IN Synchronous PCM data input 15 PCM_SYNC I/O Synchronous data strobe 16 PCM_OUT Synchronous PCM data out 17 GND 18 USB_D+ I/O USB Data + 19 USB_D- I/O USB Data - 20 PIO [2] / USB_PULL_UP I/O Programmable I/O line / USB pull-up 21 PIO [3] / USB_RESUME I/O Programmable I/O line / USB resume 22 PIO [4] I/O Programmable I/O line 23 RST 24 GND 25 ANT 26 GND Ground Reset if high Ground I/O RF input/output Ground 5-2. WML-C10### No. Symbol I/O GND Ground VDD1 RST Voltage monitor (+1.8V) when voltage regulator is integrated, or Supply voltage 1.8 V Reset if high AIO [1] I/O Programmable I/O line SPI_MISO Synchronous Serial Interface data output SPI_CSB Chip select for Synchronous Serial Interface SPI_CLK Synchronous Serial Interface Clock SPI_MOSI Synchronous Serial Interface data input VDD2 10 GND 11 UART_CTS Asynchronous serial data CTS 12 UART_RTS Asynchronous serial data RTS 13 UART_TX Asynchronous serial data output 14 UART_RX Asynchronous serial data input 15 PCM_CLK I/O Synchronous PCM data clock 16 PCM_IN Synchronous PCM data input 17 PCM_SYNC I/O Synchronous data strobe 18 PCM_OUT Synchronous PCM data out 19 VDD3 20 GND 21 USB_D+ I/O USB Data + 22 USB_D- I/O USB Data - 23 PIO [2] / USB_PULL_UP I/O Programmable I/O line / USB pull-up 24 PIO [5] I/O Programmable I/O line 25 PIO [6] I/O Programmable I/O line 26 PIO [3] / USB_RESUME I/O Programmable I/O line / USB resume 27 PIO [8] I/O Programmable I/O line 28 PIO [4] I/O Programmable I/O line 29 PIO [7] I/O Programmable I/O line 30 GND 31 ANT 32 GND Description Supply voltage 3.3V (Operating voltage for memory & AIO) Ground Supply voltage 3.3V (Operating voltage for PIO & all other Input / Output) Ground Ground I/O RF input/output Ground 6. BLOCK DIAGRAM 6-1.WML-C09### REG 16MHz VDD1 VDD2 ANT RAM XT Driver USB USB_D+ USB_D- UART UART_TX UART_RX UART_RTS UART_CTS 2nd Synthesizer BPF BasebandController MemoryManagement RF Receiver SPI_CSB SPI_CLK SPI_MOSI SPI_MISO SPI Balun RF Transmitter 16bits MicroProcessor 1st Synthesizer Programmable P/O BC2-UART / BC2-USB PCM/IF MEMORY DRIVER PCM_OUT PCM_IN PCM_SYNC PCM_CLK FLASH ROM (256kx16) PIO [2],…,PIO [4] 6-2.WML-C10### 16MHz REG VDD1 VDD2 VDD3 ANT RAM XT Driver BPF USB USB_D+ USB_D- UART UART_TX UART_RX UART_RTS UART_CTS 2nd Synthesizer RF Receiver BasebandController MemoryManagement SPI Balun RF Transmitter 1st Synthesizer BC2-UART / BC2-USB AIO [1] 16bits MicroProcessor Programmable I/O PIO [2],…,PIO [8] PCM/IF MEMORY DRIVER SPI_CSB SPI_CLK SPI_MOSI SPI_MISO PCM_OUT PCM_IN PCM_SYNC PCM_CLK FLASH ROM (256kx16) 7. PCM IF PCM_OUT, PCM_IN, PCM_CLK, PCM_SYNC carry one of bi-directional channel of voice data using 13bits PCM at 8ks/s. PCM_SYNC operates at a fixed clock frequency of 8kHz. PCM_CLK operates at a fixed clock frequency of 256kHz. Bits 1 to 13 of the PCM_OUT data carry the current output sample value. Bits 14 to 16 carry a three bit signal level value. Reference PCM audio device is MC145483. 8. PIO PORT The PIO port is general purpose IO interface and the ports consists of 8 programmable, Bi-directional PIO [2:8] . The maximum current drive capability is 4mA. 9. OVERALL APPEARANCE 9-1.WML-C09### Module without antenna WML-C09N## Module with antenna WML-C09A## 9-2.WML-C10### Module without antenna WML-C10N## Module with antenna WML-C10A##
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:05:21 13:10:49 Producer : Acrobat Distiller 4.05 for Windows Author : SAKURAI_SEIICHI Creator : ADOBEPS4.DRV Version 4.31 Title : Microsoft Word - Functional_Description_C09&C10_r1.0.doc Modify Date : 2002:05:21 13:12:16+09:00 Page Count : 7EXIF Metadata provided by EXIF.tools