Mitsumi Electric WML-C29XX Bluetooth Module User Manual Antenna Plecament Application Note
Mitsumi Electric Co., Ltd. Bluetooth Module Antenna Plecament Application Note
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 490274 |
| Application ID | m6nQ2L166hZQmJF/7D1Hkg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.11kB (338843 bits) |
| Date Submitted | 2004-11-22 00:00:00 |
| Date Available | 2004-11-22 00:00:00 |
| Creation Date | 2004-10-25 14:05:07 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2004-11-17 13:59:54 |
| Document Title | Antenna Plecament Application Note |
| Document Creator | Word 用 Acrobat PDFMaker 5.0 |
| Document Author: | Yoichiro Furuhashi |
Page 1 of 10 WML-C29_User_Manual 25th Oct 2004 WML- 29### User Manual The purpose of this manual is to explain correct way how to integrate module WML- 29### to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Content 1.General 2. Module design application. 3. Regulatory and Safety Compliance. European Union. 3.1 Declaration about performed tests. 3.2. Labelling 4. FCC Regulatory Information 4.1 Labelling. 4.2 Antenna implementation notes. 5. Other regulatory notes for OEM. 6. A separate approval. 1. General This Bluetooth radio module has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer. This Bluetooth radio module is intended to be placed on the market in all States, where the Bluetooth™ technology and the used frequency band is released. For detail information concerning type approval of this module (e.g. where this module is already pre-approved) please contact the authorised local distributor or the manufacturer. The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 2 of 10 WML-C29_User_Manual 25th Oct 2004 2. Module design application. 2.1 Model Number 1 # Contents N : without Antenna , A : with Antenna 2nd # B : BCSP , H : UART rd N : without Regulator Model number st WML-C29### 3 # 2.2 Hardware: Version 1 This document describes the reference design for application as follows. 2.3 FEATURES 1 ) Wireless communication module conforming to Bluetooth Ver.1.2. 2 ) Small and thin size achieved through use of high density mounting technology. WML-C29N## : 11.8 x 12.6 x 1.9mm WML-C29A## : 11.8 x 17.6 x 1.9mm 3 ) High sensitivity: -82dBm. 4 ) UART and PCMIF interfaces enable wide range of applications. 5 ) Conforms to FCC, CE and other countries’ EMI standards. 6 ) Supports Bluetooth Class2. 7 ) Built-in Link controller and Link Manager Protocol. 8 ) HCI interface over UART 2.4 APPLICATIONS Notebook PCs, mobile phones, digital cameras, PC peripherals, PDA, Car WML-C29### VDD (3.3V) Chip Antenna VDD (1.8V) BPF UART Bluetooth Chip RF+BB (BC2 External) Balun PCM Flash ROM Crystal PIO WML-C29### has Bluetooth chip, Flash ROM and Crystal inside. UART HCI interface and PCM interface are used for customer’s application. Following figure shows Software Stack for WML-C29### and customer’s application as example. COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 3 of 10 WML-C29_User_Manual 25th Oct 2004 2.5 Terminal functions Symbol I/O ANT AIO [0] AIO [1] I/O I/O I/O Description RF input/output or N.C.* Programmable I/O line Programmable I/O line Terminal Numbers 31 21 GND Ground GND Ground 10 GND Ground 20 GND Ground 30 GND Ground 32 I/O Synchronous PCM data clock 15 Synchronous PCM data input 16 PCM_CLK PCM_IN PCM_SYNC I/O Synchronous data strobe 17 PCM_OUT Synchronous PCM data out 18 PIO [2] I/O Programmable I/O line 23 PIO [3] I/O Programmable I/O line 26 PIO [4] I/O Programmable I/O line 28 PIO [5] I/O Programmable I/O line 24 PIO [6] I/O Programmable I/O line 25 PIO [7] I/O Programmable I/O line 29 PIO [8] I/O Programmable I/O line 27 PIO [9] I/O Programmable I/O line 22 RST Reset if high SPI_MISO Synchronous Serial Interface data output 5 (N.C.*) SPI_CSB Chip select for Synchronous Serial Interface 6 (N.C.*) SPI_CLK Synchronous Serial Interface Clock 7 (N.C.*) SPI_MOSI Synchronous Serial Interface data input 8 (N.C.*) UART_CTS Asynchronous serial data CTS 11 UART_RTS Asynchronous serial data RTS 12 UART_TX Asynchronous serial data output 13 UART_RX Asynchronous serial data input 14 VDD1 Supply voltage 1.8V VDD2 Supply voltage 3.3V (For Memory and AIO) Supply voltage 3.3V (For PIO & PADS) VDD3 19 * N.C. = Open COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 4 of 10 WML-C29_User_Manual 25th Oct 2004 2.6 Software Stack for module and customer side example API RFCOMM/SDP Customer Stack L2CAP USB port driver UART port driver HCI USB port driver HCI UART port driver Module LMP Stack Link manager Baseband / RF COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 5 of 10 WML-C29_User_Manual 25th Oct 2004 3. Regulatory and Safety Compliance . European Union. 3.1 Declaration about performed tests. The Mitsumi module WML-C29### is wireless data transmission system. This ‘Bluetooth’ module can be integrated into various end products. MITSUMI declares that The Mitsumi module WML-C29### complys with the following directive and standards: Directive 1999/5/EG (R&TTE Directive): EN 300328-2 V1.2.1 (11-2001), Radio Equipment and Systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques. Part 2: Harmonized EN covering essential requirements under article 3(2) of the R&TTE directive. EN 301489-01 V1.3.1 (09/2001), Electromagnetic Compatibility and radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301489-17 V1.1.1 (09-2000), Electromagnetic Compatibility and radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for wideband data Hiperlan equipment We hereby declare that the human exposure of the Mitsumi module WML-C29### is below the SAR limits specified in the EU recommendation 1999/519/EC (the applicable limits are specified in table 1 with 2W/kg). The technical documentation as required by the Conformity Assessment procedure is kept at the following address : 2-11-2,TSURUMAKI,TAMA-SHI,TOKYO,206-8567 JAPAN. MITSUMI ELECTRIC CO.,LTD. ACCESS DEVICE ENGINEERING DEPT. INTERFACE EQUIPMENT BUSINESS DIVISION COMPONENT DEVICES BUSINESS HQ TEL:+81-42-310-5829 FAX:+81-42-310-5582 COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 6 of 10 WML-C29_User_Manual 25th Oct 2004 3.2 Labelling CE conformity marking for product. OEM product / application, where this radio module is integrated/ installed in , has to be labelled in accordance to R&TTE directive, Article 12. An auxiliary label is included in the packaging to the radio module, which can be used for that purpose and has to be permanently affixed to the OEM product/ application, otherwise OEM product must be approved separately. Regulatory information on the OEM devise should contain labelling that: Approved in accordance to R&TTE directive transmitter module marked by CE, manufactured by MITSUMI incorporated to OEM product. More detail information present below in chapter 5. COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 7 of 10 WML-C29_User_Manual 25th Oct 2004 4. FCC Regulatory Information The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio / TV technician for help. Not Authorized modification could void authority to use this equipment. 4.1 Labelling. MITSUMI module WML 29### labelled as below. Module without antenna Module’s Serial Number MITSUMI Company Logo COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 8 of 10 WML-C29_User_Manual 25th Oct 2004 Module without antenna Module’s Serial Number MITSUMI Company Logo FCC Regulatory information. OEM devise should contain labelling that: Approved in accordance to FCC rules transmitter module marked by FCC-ID POOWML-C29XX label, manufactured by MITSUMI incorporated to OEM product. When its not possible, in user manual should be included such information. For example : “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” This device contains FCC-ID POOWML-C29XX This label will be placed on the final product, clearly visible to all persons exposed to the transmitter. The specific location on the final product will be consistent with each same final product, but will vary in location across various final products, and in any case will always be clearly visible to all persons exposed to the transmitter. The physical size of the label and font size of the lettering will be dependent on the size of the final product, but in any case will always be clearly visible to all persons exposed to the transmitter. COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 9 of 10 WML-C29_User_Manual 25th Oct 2004 4.2 Antenna implementation notes. Any antenna of a similar type witch listed in antenna declaration may be used without retesting. Use of an antenna of a different type than the tested antenna or one that exceeds the gain of a tested antenna would require retesting and new approval by either a Telecommunication Certification Body or the Commission. Manufacturers OEM would be expected to supply a list of acceptable antenna types with applications for equipment authorization. The external antennas are described as following. Model Name Manufacturer HAN8030B2R4GT TDK DA095S-2450M NEC TOKIN KIA1003 KYOCERA AHD1403-244ST01 Mitsubishi Materials AHD1206-244ST01 Mitsubishi Materials YCE-5223 Yokowo Radio module Max. Gain [dBi] 2.14 2.14 2.14 2.14 2.14 -1 WML- 29### can be incorporated into many different devices. The modules generally consist of a completely self-contained radiofrequency transmitter missing only an input and a power source to make it functional. Once the modules are authorized by the Commission under our certification procedure, they may be incorporated into a number of host devices such as, PCs or PDAs, which have been separately authorized. The completed product generally is not subject to requirements for further certification by the FCC. More detail information present below in chapter 5. 5. Other regulatory notes for OEM. Modular transmitters save manufacturers the time and any related expenses that would be incurred if a new equipment authorization were needed for the same transmitter when it is installed in a new device. This means that it can be integrated into end products without further testing or approval listing. The manufacturer must state the MITSUMI part number and product reference in his literature in order to meet the requirements of the Bluetooth and regulatory. This should be clearly indicated in the OEM manuals. The purchaser / integrator ( developer) must satisfy all relevant FCC, SAR, EMC and Radio regulations which apply to their finished product. We believe such parties have the technical competence to ensure that the systems they deploy continue to comply with all those rules. Further information and guidance on this subject and other equipment authorization matters can be found under -Regarding FCC regulatory information on the FCC’s website at: www.fcc.gov/oet/info/database/letters/. - Regarding R&TTE directive http://europa.eu.int/comm/enterprise/rtte/dir99-5.htm COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing. Page 10 of 10 WML-C29_User_Manual 25th Oct 2004 6. A separate approval. A separate approval of the device into which the module is incorporated is only required when it cannot be insured that the conditions on the module grant will be met. The purchaser must satisfy all relevant FCC, EMC and Radio regulations R&TTE directive which apply to their finished product. COMMERCIAL IN CONFIDENCE This material may not in whole or part be copied, stored electronically or communicated to third parties without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:11:17 13:59:54+01:00 Create Date : 2004:10:25 14:05:07+09:00 Page Count : 10 Creation Date : 2004:10:25 14:05:07+09:00 Mod Date : 2004:11:17 13:59:54+01:00 Producer : Acrobat Distiller 5.0 (Windows) Author : Yoichiro Furuhashi Metadata Date : 2004:11:17 13:59:54+01:00 Creator : Yoichiro Furuhashi Title : Antenna Plecament Application Note Page Mode : UseNone Tagged PDF : Yes Has XFA : NoEXIF Metadata provided by EXIF.tools