Mobi Technologies 70055R Digital Video Baby Monitor User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	1418881
Application ID	R7mGGIOot3+lFc6j7Ve21g==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.07kB (1675865 bits)
Date Submitted	2011-02-21 00:00:00
Date Available	2011-02-21 00:00:00
Creation Date	2010-12-30 17:30:06
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2011-02-21 11:51:59
Document Title	Users manual
Document Creator	Adobe InDesign CS5 (7.0)

Wireless
Audio/Video
Monitoring
System
   Compatible	
  with…	
  
Compatible with...
   with…	
  
   Compatible	
  
  
  
  
TABLE OF CONTENTS
Introduction
Package Contents
Features
Consumer Guide to Product
Safety
4-5
Knowing your Receiver
Knowing Your Camera
Installation & Setup
Monitor Operation
9-10
Camera Operation
11
Audio/Video & USB Operation
12
Troubleshooting
13
Radio Interference Advice
14
Warranty
15
Notes
16
INTRODUCTION
Congratulations on the purchase of the MobiCam Digital DL Monitoring System, which brings you the latest in wireless technology. We are sure that you
will be pleased with the quality and features of this product but recommend
that you read these instructions carefully before use in order to fully benefit
from its many features.
The MobiCam Digital DL enables you to transmit picture and sound wirelessly,
which is ideal for many situations such as monitoring a baby, young children,
pets, or elderly. Additionally it can also be used for household security or as an
office or warehouse surveillance system.
  
Your MobiCam DL uses digital transmission to ensure a clear and consistent
picture. The signal also passes easily through interior walls. However, buildings
with metal frames or placing the camera near large metal objects may cause
signal degradation. If reception is poor, moving the camera or receiver may fix
this problem.
PACKAGE CONTENTS
1 x Receiver Unit
1 x Camera Unit (#70056, additional cameras sold separately)
1 X Receiver Power Cord
1 X Camera Power Cord
1 x AV cable
1 set of mounting screws and anchors
NOTE: If you find any of the contents are missing or should you need to order replacement parts, please contact the manufacturer or visit www.getmobi.com.
FEATURES
•
2.4” Color High Resolution TFT LCD Display
•
Voice Activated Picture & Sound with Auto Mute
•
Audio Only Mode
•
No installation needed—ready to use
•
Compact design for easy portability
•
Transmission range up to 300 ft.
•
Powerful Night Vision with 20 ft. range
•
Extra Wide Camera Viewing Angle
•
Expandable up to 4 Cameras with automatic camera scanning option
•
Camera operates on AC or 4 AA Alkaline Batteries (not included).
•
Monitor operates on AC or 5 Alkaline AA Batteries (not included)
•
Optional rechargeable battery pack is available (item # 70077).
•
USB Output for PC connection
•
Use as a wireless webcam
CONSUMER GUIDE TO PRODUCT SAFETY
Please read this instruction manual before using your MobiCam Digital DL system. When using electrical appliances, basic safety precautions should always
be followed.
Please keep safe for future reference.
•
This product is not intended to be used as a medical monitor and its
use should not replace adult supervision.
•
Periodically examine this product for damage to the cord, housing or
other parts that may result in the risk of fire, electric shock or injury.
Do not operate any product with a damaged cord or plug. If the Color
Wireless Monitor malfunctions or is damaged in any manner please
contact the manufacturer for examination and repair to avoid a hazard.
•
Never use transmitter and receiver near water (i.e. bathtub, sink, etc.).
•
The AC adaptors are not Toys.
•
Always use transmitter and receiver where there is adequate 		
ventilation. To prevent overheating, keep away from heat sources
such as radiators, heat registers, stoves, or other appliances that
produce heat.
•
Use only a dry cotton cloth to keep the Camera and Monitor units
free of dust. Do no use a dampened cloth, water, or liquid cleaner
of any kind.
•
Remove the battery from the Monitor during long periods of nonuse as alkaline batteries can leak.
•
Unplug the AC adaptors from the Monitor and Camera during peri
ods of non-use. To disconnect from the power supply, grip the
transformer and pull from the power socket. Never pull by the
cord.
•
Replace battery with the same equivalent type. Please dispose of
old, defective batteries in an environmentally friendly manner in
accordance with the relevant legislation.
•
Only use the Monitoring System with the supplied power adaptors.
KNOWING YOUR RECEIVER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
TFT LCD Display
Control (+) (-)
Mode Button
Power indicator
Sound Bar LEDs
Speaker
Volume and power On/Off switch
Mini USB Output
DC Jack
A/V Jack
KNOWING YOUR CAMERA
11.
12.
13.
14.
15.
16.
17.
Camera Lens
Power indicator
Mic
Night Vision Sensor
Link Button
Power On / Off
DC Jack
  
INSTALLATION & SETUP
The MobiCam Digital DL Monitor is designed to be powered by either batteries
or the AC/DC adaptors. You can also purchase a rechargeable battery pack (item
# 70077) available at getmobi.com or retailer to use with your monitor.
Using AC/DC adaptor:
•
Plug the connector of the AC adaptor into the DC Jack on the unit (fig. 		
9 & 17).
•
Plug the power cord into an outlet.
•
Switch the power plug to the ON position (fig. 7 & 16)
•
The power indicator lights will illuminate once the units are turned on 		
(fig. 4 & 12)
Using Batteries:
•
Remove the battery door at the bottom/back of each unit by loosening
the child-safe screw and sliding the cover downward to release.
•
Both units can use 1.5 volt AA size batteries. (Always use batteries of 		
the same brand and age, alkaline batteries are recommended)
Insert 4 AA batteries into camera and 5 AA batteries into the monitor.
•
Replace the covers by aligning the tabs with the tab holes and tighten		
ing the child-safe screws.
Please note that the life of batteries is limited. Therefore, when monitoring over
long periods and, in particular, overnight, it is recommended to use AC adaptors
for both the camera and the monitor unit.
Warning:
1.
Do not mix old and new batteries.
2.
Do not mix alkaline, standard or rechargeable batteries
3.
Remove the batteries during long periods of non-use.
4.
Use only the AC adaptors supplied with the package.
Optional Battery Pack:
The Monitor on your system has a built-in battery recharging circuit. Make sure
you only use the optional battery pack (Item # 70077), as standard rechargeable
batteries will not recharge.
				 Note: Camera unit does not recharge batteries.
MONITOR OPERATION
Power ON/OFF
Use the volume and ON/OFF switch (fig. 7) on the side of the unit to turn On
and Off. To adjust the volume use the ON/OFF switch to scroll to the desired
level.
Channel Selection
Press the Mode Button on the front of the monitor 1 time to enter the channel
selector mode, use the side “+” and “-” control buttons (see fig. 2) to change
the Channel or to set your monitor to Scan mode. The display will indicate the
selected channel during the channel selection process on the bottom of the
screen.
  
Automatic Channel Scan
This option allows the Monitor to scan through all 4 channels automatically and
stops at each channel for approximately 5 seconds in order to monitor multiple
locations.
“Scan Select Mode”- Selecting which camera to Scan
To set your monitor to scan certain channels while in scan mode, press the
Mode Button 4 times until the Scan Select menu appears. Use the Mode button
to scroll through the available channels and the “+” and “-” control buttons (see
fig. 2) to select and deselect the desired channel(s).
“Camera Selection”- Add or Remove Cameras
To remove paired cameras, press the Mode button 8 times until the Paired
Select menu appears. Use the Mode button to scroll through the available channels and the “+” and “-” controls (see fig. 2) to select or remove the camera.
Note: You must re-link your camera once it has been removed in order to be able to view
the camera again (see page 12 for linking instructions).
MONITOR OPERATION
LCD On/Off
Press the Mode Button and hold for 3 seconds until the LCD screen is off. This
feature enables you to use the monitor as an audio only system allowing you to
conserve power.
To deactivate, press the Mode Button for 3 seconds.
Brightness Control
The brightness on the LCD screen can be adjusted by pressing the Mode button
2 times and using the “+ “& “–“ control buttons (fig. 2) until the desired level is
reached.
Mode button
Voice Activation (VOX)
Voice Activation (VOX) mode allows your monitor to go to sleep mode when
there is no sound in the room. The monitor will automatically turn on when the
camera detects noise– subject to the factory preset sound level. This feature
allows you to conserve battery power.
NOTE: The Monitor will automatically switch to standby mode if no signal is received
from the Camera
To Activate / Deactivate: Press the Mode button3 times and the VOX icon will
appear. Your monitor will display “VOX” when this feature is turned on. Use the
“ + “ & “ - “ control buttons (fig. 2) to turn the function on or off.
10
CAMERA OPERATION
Power ON/OFF
Use the ON/OFF switch (fig. 16) to turn the unit On and Off.
Infrared Night Vision Mode (Automatic)
The infra-red night vision mode will switch on automatically during darkness or
periods of low levels of light. In this mode only black and white images will be
displayed on the monitor. For best image clarity objects should be placed within
20 ft of the camera.
Additional Cameras
(#70056, additional cameras sold separately)
This product is designed to allow monitoring different areas with up to 4 cameras (Channel 1, 2, 3 and 4). The Monitor and Camera will be initially paired and
set on channel 1.In order to add additional cameras to your system, you will
need to link the camera to your monitor before use.
1.
2.
3.
Select the desired channel (see page 10) on your monitor.
Press the link button on the side of your camera (fig. 15), the power
indicator will begin to flash indicating your camera is ready to be 		
linked.
Press the “+ “& “-“ control buttons (fig. 2) simultaneously until the im		
age appears on the screen.
11
AUDIO/VIDEO & USB OPERATION
Audio/Video& USB Output
Your monitor is equipped with both an A/V output and USB output so that you
can connect your monitor to a TV, DVR, VCR or computer so that you can capture video and sound from the camera transmission.
Note: The monitor screen turns off automatically when A/V cable or USB cable is used.
The screen will turn back on when the cable is removed.
A/V Cable Connection
The A/V Output Jack is located on the left side of the monitor (fig. 10). Simply
connect the supplied AV Connector Cord to the jack and connect the other ends
(three RCA connectors) to the Audio and Video input jacks on your TV, VCR or
Camcorder and select the appropriate input on your device. The monitor screen
will automatically turn off signaling the unit is connected. (Please refer to your
device manual for input selection & operation)
USB Connection
Note: You will need to install the USB driver before using the USB connection to your PC.
Use a standard Mini USB cable available at retail stores (not included) to connect your monitor to your PC.
  
The USB output is located on the left side of the monitor (fig. 8). Please be sure
to visit our website at www.getmobi.com to download the device driver.
Once you have installed the device driver your MobiCam DL can be utilized as
a wireless webcam. The unit can be used in conjunction with Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger®. Additionally you can
purchase the MobiCam Anywhere Software and set your monitor for scheduled
recordings, continuous recording and remote viewing via any PC or windows
enabled cell phone. For more information visit www.getmobi.com
12
TROUBLESHOOTING
Problem
Solution
•
•
•
•
No Image
•
•
Monitor or Camera has not been turned on.
Check AC/DC connection
Confirm power outlet is working properly.
Battery is low (check Led indicator: Full Power
Green; Low Power - Red)
Wrong Channel (Please note the monitor will
return to Channel 1 automatically after power
off)
VOX mode is on, See Page 11
•
•
LCD screen is Off, See Page 10
Low Power (Check LED indicator: Full Power
Green; Low Power – Red)
Only Black & White
picture displayed
•
Camera may have switched to “Infrared Night
Vision Mode,” See Page 12
Battery does not
recharge
•
•
AC/DC adaptor has not been connected.
Non-rechargeable battery has been used,
See Page 9
Camera will not link
•
•
•
Unit has not been switched on.
AC/DC adaptor has not been connected.
Check to make sure you are making contact
with the link button.
Check to make sure you are selecting the
correct channel
Only Sound is
Functioning
•
Screen turns on and off
•
•
Channels Keep Switching •
“VOX” mode is selected, when there is no noise
detected by the camera the screen and audio
turn off, See page 11
Batteries are low, LED indicator will be red
Confirm status of scan mode, See page 10
13
RADIO INTERFERENCE ADVICE
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for un-
controlled environment.The
should
installed
and
operated
with
environment. Thismodel70055T
equipment should
bebe
installed
and
operated
with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment complies with FCC RF radiation exposure limits set
transmitter.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and,
and, ifif not
not installed
installed and
and used
used in
in accordance
accordancewith
withthe
the
instructions, may
may cause
cause harmful
harmful interference
interferenceto
toradio
radiocommunications.
communications.
instructions,
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
—Connect
equipment
into antooutlet
a circuit
fromby
that
to or
which the
and
on, the the
user
is encouraged
try to on
correct
the different
interference
one
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver
the
receiver is
is connected.
connected.
—Consult the dealer or an experienced radio/TV technician for help.
14
WARRANTY
IC STATEMENT
IC STATEMENT:
Operation of this device is subject to the following two conditions:
1.
2.
this device may not cause interference, and
this device must accept any interference, including interference that
this
device
must
accept any
interference,
may
cause
undesired
operation
of
device.
may
cause
undesired
operation
of the
theincluding
device. interference that
Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase.
Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without
charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty service, please return the
product to Mobi along with a dated sales receipt from the place of purchase.
Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at
the address indicated below and for all associated freight and insurance costs.
This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modification, or connection to an improper
power supply. A charge will be made for repair of such damage. This warranty
excludes all incidental or consequential damages and any liability other than
what is stated above. © 2011 Mobi Technologies, Inc. All Rights Reserved.
Mobi Technologies, Inc.
5913 Blackwelder St
Culver City CA 90232
Toll Free Number (877) 662-4462
www.getmobi.com
Mobi and MobiCam are registered trademarks of Mobi Technologies, Inc.
© 2011 Mobi Technologies, Inc. All Rights Reserved
Please register your product at: www.getmobi.com/registerproduct.php
15
NOTES


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:5c4c56fa-dc00-4caf-b1e6-406ff8aac1c6
Document ID                     : xmp.did:07801174072068118C14D1EA74657FFF
Original Document ID            : adobe:docid:indd:391c15eb-a921-11de-8c7d-dd4993b7ffac
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:02801174072068118C14D1EA74657FFF
Derived From Document ID        : adobe:docid:indd:391c15eb-a921-11de-8c7d-dd4993b7ffac
Derived From Original Document ID: adobe:docid:indd:391c15eb-a921-11de-8c7d-dd4993b7ffac
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F1174072068118F62DD2AA0EFAB1E, xmp.iid:F87F1174072068118F62DD2AA0EFAB1E, xmp.iid:F97F1174072068118F62DD2AA0EFAB1E, xmp.iid:02801174072068118C14D1EA74657FFF, xmp.iid:07801174072068118C14D1EA74657FFF, xmp.iid:62F8D6EF1C2068118C14D1EA74657FFF, xmp.iid:3C162C4B202068118C14D1EA74657FFF, xmp.iid:43162C4B202068118C14D1EA74657FFF, xmp.iid:73DDDA26222068118C14D1EA74657FFF, xmp.iid:5834CFE8582068118F62DD2AA0EFAB1E, xmp.iid:EA0E497D592068118F62DD2AA0EFAB1E, xmp.iid:58A77D675A2068118F62DD2AA0EFAB1E, xmp.iid:DC6AE9A35B2068118F62DD2AA0EFAB1E, xmp.iid:B6C6D3C45B2068118F62DD2AA0EFAB1E, xmp.iid:B7C6D3C45B2068118F62DD2AA0EFAB1E, xmp.iid:275C79FF5C2068118F62DD2AA0EFAB1E, xmp.iid:7EBC980A5E2068118F62DD2AA0EFAB1E, xmp.iid:DA0D341D5F2068118F62DD2AA0EFAB1E, xmp.iid:C175C0B55F2068118F62DD2AA0EFAB1E, xmp.iid:3BBB250F612068118F62DD2AA0EFAB1E, xmp.iid:3D2AF282612068118F62DD2AA0EFAB1E, xmp.iid:3E2AF282612068118F62DD2AA0EFAB1E, xmp.iid:68DF3415622068118F62DD2AA0EFAB1E, xmp.iid:DADDEAEA622068118F62DD2AA0EFAB1E, xmp.iid:DBDDEAEA622068118F62DD2AA0EFAB1E, xmp.iid:C54C04A1642068118F62DD2AA0EFAB1E, xmp.iid:C64C04A1642068118F62DD2AA0EFAB1E, xmp.iid:DEFA6192652068118F62DD2AA0EFAB1E, xmp.iid:DFFA6192652068118F62DD2AA0EFAB1E, xmp.iid:2454A822672068118F62DD2AA0EFAB1E
History When                    : 2010:12:29 16:47:49-08:00, 2010:12:29 16:47:49-08:00, 2010:12:29 16:52:03-08:00, 2010:12:30 13:15:14-08:00, 2010:12:30 13:15:14-08:00, 2010:12:30 14:47:08-08:00, 2010:12:30 15:11:10-08:00, 2010:12:30 15:20:18-08:00, 2010:12:30 15:24:28-08:00, 2010:12:30 15:47:59-08:00, 2010:12:30 15:52:09-08:00, 2010:12:30 15:58:41-08:00, 2010:12:30 16:07:32-08:00, 2010:12:30 16:08:28-08:00, 2010:12:30 16:15:17-08:00, 2010:12:30 16:17:15-08:00, 2010:12:30 16:24:44-08:00, 2010:12:30 16:32:24-08:00, 2010:12:30 16:36:40-08:00, 2010:12:30 16:46:20-08:00, 2010:12:30 16:49:34-08:00, 2010:12:30 16:50:29-08:00, 2010:12:30 16:53:40-08:00, 2010:12:30 16:59:38-08:00, 2010:12:30 17:01:12-08:00, 2010:12:30 17:11:53-08:00, 2010:12:30 17:15:29-08:00, 2010:12:30 17:18:38-08:00, 2010:12:30 17:21:07-08:00, 2010:12:30 17:29:50-08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Create Date                     : 2010:12:30 17:30:06-08:00
Modify Date                     : 2011:02:21 11:51:59-08:00
Metadata Date                   : 2011:02:21 11:51:59-08:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 12319 bytes, use -b option to extract), (Binary data 8728 bytes, use -b option to extract)
Doc Change Count                : 1626
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 20
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools