Mobi Technologies 70290T Pure Sounds Wireless Audio Monitor (Transmitter Unit) User Manual

Mobi Technologies, Inc. Pure Sounds Wireless Audio Monitor (Transmitter Unit) Users Manual

Users Manual

Compatiblewith…Compatiblewith…
TABLE OF CONTENTS INTRODUCTIONIntroducon 1Package Contents 2Features 3Consumer Guide to Product Safety4-5Knowing your Receiver 6Knowing Your Transmier 7Installaon & Setup 8Receiver/Transmier Operaon 9Troubleshoong 10Radio Interference Advice 11Warranty 12Notes 13Congratulaons on the purchase of the Mobi® Pure Sounds™ Audio Monitor-ing System, which brings you the latest in wireless technology. We recommend that you read the instrucons carefully before use.The Mobi® Pure Sounds™ enables you to transmit audio wirelessly, which is ideal for monitoring a babies, young children, pets, or the elderly. Your Mobi® Pure Sounds™ uses a digital transmission to ensure clear and con-sistent audio transmission. The signal also passes easily through interior walls. However, buildings with metal frames or placing the transmier near large metal objects may cause signal degradaon. If recepon is poor, moving the transmier or receiver may x this problem.1
PACKAGE CONTENTS FEATURES• Trasmission Range up to 600Ft• 2.4 GHz Private Digital Transmission• No installaon needed—ready to use• Compact design for easy portability• Auto Mute with Voice Acvaon • Low Baert and Out of Range Indicators • Rechargeable Baeries Included for Receiver• AC Adaptors included for Receiver and Transmior1 x Receiver Unit (#70294R) 1 x Transmier Unit (#70294T) 1 X Receiver Power Cord1 X Transmier Power Cord 1 x Rechargeable Baery PackNOTE: If you nd any of the contents are missing or should you need to order replace-ment parts, please contact the manufacturer or visit www.getmobi.com.2 3
• Always use transmier and receiver where there is adequate venlaon. To prevent overheang, keep away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.• Use only a dry coon cloth to keep the Camera and Monitor units free of dust. Do no use a dampened cloth, water, or liquid cleaner of any kind. • Remove the baery from the Monitor during long periods of non- use as alkaline baeries can leak.• Unplug the AC adaptors from the Monitor and Camera during peri ods of non-use. To disconnect from the power supply, grip the transformer and pull from the power socket. Never pull by the cord.• Replace baery with the same equivalent type. Please dispose of old, defecve baeries in an environmentally friendly manner in accordance with the relevant legislaon.• Only use the Monitoring System with the supplied power adaptors.CONSUMER GUIDE TO PRODUCT SAFETYPlease read this instrucon manual before using your Mobi® Pure Sounds™ sys-tem. When using electrical appliances, basic safety precauons should always be followed. Please keep safe for future reference.• This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of re, electric shock or injury. Do not operate any product with a damaged cord or plug. If the Color Wireless Monitor malfuncons or is damaged in any manner please contact the manufacturer for examinaon and repair to avoid a hazard.• Never use transmier and receiver near water (i.e. bathtub, sink, etc.).• The AC adaptors are not Toys.4 5
KNOWING YOUR RECEIVER KNOWING YOUR TRANSMITTER11. Power On Indicator12. DC Jack (5V/600mA) Buon & LED Funcons1. Power On/O Buon2. Volume Up ( + )3. Volume Down ( - )4. Sound Level Indicator (LED will ash indicang noise level increase)5. Power On Indicator (baery charge indicator)6. Link Indicator LED (LED will blink if connecon is poor/lost)7. Speaker 8. DC Jack (5V/600mA)9. Belt Clip10. Baery Compartment6 7123456789101112
INSTALLATION & SETUP RECEIVER/TRANSMITTER OPERATIONThe Mobi® Pure Sounds™ transmier is designed to be powered by either rechargeable baeries (provided) or the AC/DC adaptors. Using AC/DC adaptor:• Plug the connector of the AC adaptor into the DC Jack on the unit (g. 7 pg. 6, g. 12 pg. 7).• Plug the power cord into an outlet.• Press the Power On/O Buon (g. 1 pg. 7) to turn ON your receiver.• The power indicator lights will illuminate indicang units are ON (g. 5 pg. 6, g. 11 pg. 7)Using Baeries:• Remove the belt clip (g.8 pg. 6) by sliding the clip downwards• Remove the baery door on your receiver (g. 9 pg. 6)• Plug in the supplied baery pack into your baery compartment• Return baery cover and belt clip to their original posion Note: Baery life is between 3-4 hours. When monitoring over long periods and, in parcular, overnight, it is recommended to use AC adaptors for the receiver.Warning:1. Use on the supplied baery pack with your receiver.2. Do not mix old and new baeries.3. Do not mix alkaline, standard or rechargeable baeries4. Remove the baeries during long periods of non-use.5. Use only the AC adaptors supplied with the package.Note: Transmier only funcons with AC Adaptor. Receiver Power ON/OFFPress the Power On/O Buon (g. 1 pg. 7) to turn on your receiver. The power indicator light (g. 5 pg. 6) will turn red indicang receiver is ON.Volume AdjustmentPress the volume up (g. 2 pg. 6) or volume down (g. 3 pg. 6) to adjust the volume to the desired level.LED Indicator LightsThe Link Indicator Light (g. 6 pg 6) will blink connuously if your connecon to the receiver is poor or lost. The Sound Indicator Light (g. 4 pg 6) will blink when sound levels increaseAuto Mute/VOX Acvaon SengYour receiver is equiped with automaca mute seng. When sound levels reach a preset level the mute opon will engage to conserve baery power, once the transmier picks up noise the receiver will automacally begin trans-ming.Note: If link is lost between transmier and receiver you must place both units near each other, turn them o then on and link will resume.Transmier Power ON/OFFYour trasmier will automacally turn ON once you plug in the AC/DC adaptor (g. 12 pg. 7)8 9
RADIO INTERFERENCE ADVICETROUBLESHOOTING10 11Problem SoluonTransmier will not turn on • Check AC/DC Connecon.• Conrm power outlet is working properly.• Charge Baery PackReceiver will not turn on• Check AC/DC Connecon.• Conrm power outlet is working properly. Baery does not recharge• AC/DC adaptor has not been connected.• Check baery pack connecon to receiver.Connecon is lost • Conrm receiver and transmier are ON.• Conrm AC/DC adaptor is connected properly.• Place transmier and receiver near each other, • turn o both units and turn the back on to • resume link FCC Statement15.19:This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference and(2) This device must accept any interference received, including interference that may cause undesired operaon. 15.21:Changes or modicaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Radiaon Exposure Statement:--IC STATEMENT:Operaon of this device is subject to the following two condions:1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operaon of the device.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .For baby unit it should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WARRANTY12Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defecve at any me during the warranty period, Mobi Technologies, Inc. will, at its opon, either replace or repair it without charge. Aer the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty service, please return the product to Mobi along with a dated sales re-ceipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at the address indicated below and for all associated freight and insurance costs. This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modicaon, or connecon to an improper power supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequenal damages and any liability other than what is stated above. © 2011 Mobi Technologies, Inc. All Rights Reserved.Mobi Technologies, Inc.5913 Blackwelder StCulver City CA 90232Toll Free Number (877) 662-4462www.getmobi.comPlease register your product at: www.getmobi.com/registerproduct.phpNOTES13
Mobi Technologies, Inc.5913 Blackwelder StCulver City CA 90232Toll Free Number (877) 662-4462www.getmobi.comMobi and Pure Sounds are registered trademarks of Mobi Technologies, Inc.© 2012 Mobi Technologies, Inc. All Rights Reserved

Navigation menu