Mobi Technologies 70295T MobiCam Clear & Secure Digital Audio/Video Monitor User Manual

Mobi Technologies, Inc. MobiCam Clear & Secure Digital Audio/Video Monitor Users Manual

Users Manual

Compatiblewith…Compatiblewith…70294 wirelessaudio/video monitorCompleteOperatingInstructions
TABLE OF CONTENTS pgIntroduction 1Package Contents 1Features 2Consumer Guide to Product Safety 3-4Know Your Monitor 4Know Your Camera 5Powering Up 6Monitor/Camera Operation 7-10Troubleshooting 11Radio Interference Advice 12Warranty 13 LIST OF FIGURES pg Fig. 1 – Signal Strength 1 Fig. 2 – Secure Start Monitor 2 Fig. 3 – Secure Start Camera 2 Fig. 4 – Secure Start Monitor – Left / Front View 4 Fig. 5 – Secure Start Monitor – Right / Front View 4 Fig. 6 – Secure Start Monitor – Rear View 4 Fig. 7 – Secure Start Camera – Right / Front View 5 Fig. 8 – Secure Start Camera – Rear View with Stand 5 Fig. 9 – Volume Adjustment Menu Display 7 Fig.10 – Operations Display – Brightness Highlighted 7 Fig.11 – VOX Enabled Display 7 Fig.12 – Operations Display – VOX Sense Highlighted 8 Fig.13 – VOX Sensitivity Adjustment Display 8 Fig.14 – Operations Display – Menu Exit Highlighted 8 Fig.15 – Audio Mode Only Display 9 Fig.16 – Operations Display – Talk Vol Highlighted 9 Fig.17 – Talk Volume Adjustment Display 9 Fig.18 – Operations Display – Brightness Highlighted 10 Fig.19 – Brightness Adjustment Display 10 Fig.20 – Other Screen Indicators 10
1INTRODUCTIONCongratulations on the purchase of the Mobi® Secure Start™ Audio/Video Moni-toring System, bringing you the latest in wireless technology. We recommend you read the instructions carefully before use. The Mobi® Secure Start™ enables you to transmit audio wirelessly, which is ideal for monitoring babies, young children, housebound seniors, or pets.About 2.4 Ghz Digital Wireless SignalsSecure Start™ is an innovative, digital wireless solution integrating advanced Frequency Hopping Spread Spectrum (FHSS). This technology greatly reduces interference coming from other devices using the same radio frequency (2.4 Ghz), such as WIFI, Bluetooth, cord-less phones, etc.. However, a weaker signal (lag or still image) can occur from time to time depend-ing on the environment where the system is installed. Factors affecting transmission include use near microwave ovens or other high frequency electromagnetic waves, as well as reinforced concrete walls, large scale metal products and metal furniture.Additionally your wireless router speed can be affected if the units are placed close to the router. Your signal strength will return to normal once the units are placed farther from the router or once they are turned off.If You Experience Reception ProblemsFirst, readjust the monitor to a different angle. Next, attempt to relocate the camera in closer proximity to the monitor. If none of these steps resolves the problem, if at all possible, rearrange potential obstacles such as desks, furniture, metal cabinets, etc. PACKAGE CONTENTS 1 x Monitor Unit # 70294R (Fig. 2) 1 x Camera Unit # 70294T (Fig. 3) 1 x Monitor AC/DC Adapter Cord 1 x Camera AC/DC Adapter Cord1 x Mobi® Rechargeable Battery Pack* 1 x Camera Stand*for Monitor onlyNOTE: If you nd any of the contents are missing or should you need to order replacement parts, please contact Mobi Technologies, Inc., Monday through Friday between 8am and 5pm PST at 1.877.662.4462, or visit www.getmobi.com.
FEATURES   •2.0”LCDColorHighResolutionTFTLCDDisplay   •VoiceActivatedPicture&SoundwithAutoMute   •TransmissionRangeupto400Ft   •Upto6FtNightVisionRange   •2.4GhzPrivateDigitalTransmission   •Noinstallationneeded—readytouse   •Compactdesignforeasyportability   •AutoMutewithVoiceActivation   •AudioOnlyOption   •LowBatteryandOutofRangeIndicators   •RechargeableBatteriesIncludedfortheMonitor   •AC/DCAdaptersincludedforMonitorandCamera2
3CONSUMER GUIDE TO PRODUCT SAFETYPlease read this instruction manual before using your Mobi® Secure Start™ sys-tem. When using electrical appliances, basic safety precautions should always be followed. Note: Please keep this manual for future reference.•Thisproductisnotintendedtobeusedasamedicalmonitoranditsuseshouldnot replace adult supervision.•Periodicallyexaminethisproductfordamagetothecord,housingorotherpartsthatmayresultintheriskofre,electricshockorinjury.Do not operate any product with a damaged cord or plug. If the Color Wireless Monitor malfunctions, or is damaged in any manner, please contact the manufacturer for examination and repair to avoid a hazard.•NeverusetheCameraand/ortheMonitornearwater(i.e.bathtub,sink, etc.).•TheACadaptersarenottoys.•AlwaysusetheCameraandtheMonitorwherethereisadequateventilation.Toprevent overheating keep the Camera and the Monitor away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.•Useonlyadrycottonclothtokeeptheunitsfreeofdust.Donotuseadampcloth, water, or liquid cleaner of any kind.
4•RemovethebatteriesfromtheMonitorduringlongperiodsofnon-use,asbat-teries can leak.•UnplugtheACadaptersfromtheMonitorandtheCameraduringperiodsofnon-use. To disconnect from the power supply, grip the transformer and pull from the power socket. Never pull by the cord.•OnlyusetheMonitoringSystemwiththesuppliedpoweradapters.KNOW YOUR MONITOR213456789101112Button & LED Functions: (Fig. 4)1 Two-Way (TALK) Button2PowerSelector(OFF•AUDIO•ON) (battery charge indicator)3 Belt Clip4 Power ON Indicator 5 Volume Up ( + ) Button6 Menu Button7 Volume Down ( - ) Button (Fig. 5)8 VOX OFF / ON Button9 AC/DC Adapter Jack10 Microphone (Fig. 6)11 Speaker 12 Battery Door
KNOW YOUR CAMERA513 14 15171618 2019Button & LED Functions: (Fig. 7) 13 Light Sensor 14 Power ON Indicator15 Speaker16 LINK Button17 Power Selector OFF / ON (Fig. 8) 18 AC/DC Adapter Jack19 Camera Stand20 Stand Mounting Socket
6POWERING UPThe Mobi® Secure Start™ Camera is powered by an AC/DC Adapter while the Monitor can be powered by either rechargeable batteries or an AC/DC Adapter (both provided).Using the AC/DC Adapters:•PlugtheconnectoroftheAC/DCAdaptersintotheDCJacksontheMonitor and Camera units (Fig. 5; no. 9 and Fig. 8; no. 18). Both AC/DC Adapters are the same and are interchangeable between the Monitor and the Camera.•PlugtheadapterpowercordsintoastandardACoutlet.•TochecktheMonitor,switch the Power ON/OFF Selector to the ON position (Fig. 4; no. 2).•TochecktheCamera,switch the ON/OFF Selector to the ON position (Fig. 7; no. 17).•Thepower indicator lights will illuminate indicating that the units are ON (Fig. 4; no. 4 and Fig. 7; no. 14).Using Batteries:•Removethebatterydoor(Fig. 6, no. 12) on your Monitor using a screwdriver and insert the Mobi® rechargeable batteries.•Returnthebattery cover to the original position and secure the screw with a screwdriver and allow the batteries to charge with the AC/DC Adapter con- nected.•Thebattery indicator light is green when charged and will turn red when batter- ies are low. Note: One battery charge goes between 3-4 hours. When monitoring over long periods and, in particular, overnight, it is recommended to use the AC/DC Adap- tor for the Monitor. Warnings: 1. Replace rechargeable batteries with Mobi® rechargeables ONLY. 2. When using non-rechargeables do not mix old and new batteries. 3. Do not mix alkaline, standard or rechargeable batteries. 4. Remove the batteries during long periods of non-use. 5. Please dispose of old, defective batteries in an environmentally friendly manner, in accordance with the relevant legislation. 6. Use only the AC/DC Adapters supplied with the system. Note: Camera only functions while its AC/DC Adapter is connected.
7MONITOR / CAMERA OPERATIONMonitor Power ON/OFFSwitch the Power ON/OFF Selector (Fig. 4, no. 2) to the ON position. The power indicator light (Fig. 4, no. 4) will turn on indicating the Monitor is ON.Volume Adjustment Press the Volume Up ( + ) Button (Fig. 4; no. 5) or Volume Down ( - ) Button (Fig. 4; no. 7) to adjust the volume to the desired level. This image (Fig. 9) will appear on screen to indicate the sound level.Menu Settings Press the Menu Button (Fig. 4; no. 6) to enter the menu operation mode. There are 3 operations you can adjust as shown here (Fig. 10): “Brightness”,“VOXSense”(VoiceActivation Sensitivity Level) andthe“TalkVol”(Two-WayTalk Volume) level. To select anoperationusethe“+”and“-”Buttonstotogglebetweenthe three options. Once the desired option is selected press the Menu Button again to go to that operation mode.Note: The selected operation will be highlighted in red.VOX (Voice Activation) ModeYour Monitor is equipped with VOX mode. To turn on this feature switch the VOXbutton (Fig. 5; no. 8) to the ON position. The following message (Fig. 11) will ap-pear on screen indicating the feature is enabled.
8VOX mode allows your Monitor to go into standby which conserves battery power. While in VOX mode your Monitor will stop transmitting audio and video. However, whenever the Camera picks up noise (like your baby or anything else) in the room, the Monitor will automatically begin transmitting video and sound.Once the room is quiet again the Monitor with return to the power-saving VOX mode unless you have switched off the VOX feature.VOX Sensitivity Adjustment You can adjust the VOX noise sensitivityto a desired level. Press Menu and use the“+”and“-”ButtonsandselectVOXSense (Fig. 12).Next press the Menu Button again to select that operation and then use the “+”and“-”Buttonsagaintoadjustthesensitivity to the desired level (Fig. 13) ...Lo, Mid, or Hi sensitivity to noise.Press the Menu button once more to select that sensitivity level and return to the three operation choices.Exiting MenuTo get back to the normal screen (with only the Signal and Battery Strength symbols) from the three operation choicescreen, usethe“+”and“-”Buttonstoscroll to Menu Exit (Fig. 14) and press the Menu Button again.
9Audio Only ModeYour Monitor features an Audio Only mode option. This option allows you to conserve battery power while transmitt-ing and receiving only audio, leaving the video off. To select this option switch the PowerSelector(OFF•Audio•ON)(Fig. 4; no. 2) to Audio. This message (Fig. 15) will appear on screen indicating this mode is enabled.Two-Way TalkYour Monitor can allow you to communicate through the Camera when you press the Talk Button (Fig. 4; no. 1). Pressing the Talk Button en-ables your Camera to receive audio from the Monitor.To adjust the volume level for this option press the Menu Buttonandusethe“+”and“-”ButtonstoscrolltoTalkVol (Fig, 16). Press the Menu Button again to go to the Talk Volume Ad-justment Display (Fig. 17) and usethe“+”and“-”Buttonstoselect the desired level then press the Menu Button once more to set that level.
10Brightness LevelTo adjust the brightness level on your Monitor press the Menu Button and use the“+”and“-”ButtonstoselectBright-ness (Fig. 18).Press the Menu Button again to select that option which shows the Brightness level scale (Fig. 19).Usethe“+”and“-”Buttons to select the desired level and then the Menu Button again to set the level.Linking the UnitsYou can pair the Monitor and Camera when necessary using these steps:•TurnONbothunits•OntheMonitor:Pressandholdthe“-“and“+”buttonstogetheruntilitspower ON indicator starts blinking.•ThenontheCamera:Pressandholdthe LINK Button (Fig. 7, no. 16) until its power ON indicator starts blinking.•Thesystemwillcompletetheunitmatching process automatically.•Onceproperlylinkedthemonitorwilldisplay the image transmitted from the camera.Note: Secure Start™ is a single Camera system and does not support multiple cameras. Other Screen Indicators Your Monitor will always indicate the signal strength and battery level on screen (Fig. 20).Battery LevelSignal Strength
11TROUBLESHOOTING Problem SolutionMonitorwillnotturnon •CheckAC/DCConnection   •Conrmpoweroutletisworkingproperly.   •ChargeBatteryPackMonitor does not show •Conrmaudioonlymodeisnotselectedanimage  •ConrmVOXmodeisOFF   •Conrmtherearenoobstructionsinfront of CameraMonitor only transmitting •ConrmaudioonlymodeisnotselectedaudioCamerawillnotturnon •CheckAC/DCConnection   •Conrmpoweroutletisworkingproperly.Batterydoesnotrecharge •AC/DCadapterhasnotbeenconnected   •CheckbatterypackconnectiontoMonitor.   •Conrmpoweroutletisworkingproperly.   •ConrmbatteriesareplacedcorrectlyinMonitor.Connectionislost •ConrmMonitorandCameraareON.   •ConrmAC/DCadapterisconnectedproperly.   •PlaceCameraandMonitorneareachotherand press camera link button
12RADIO INTERFERENCE ADVICEFCC Statement15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer-ence and (2) This device must accept any interference received, including inter-ference that may cause undesired operation.15.21:Changesormodicationsnotexpresslyapprovedbythepartyresponsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for un-controlled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This Camera must not be collocated or operating in conjunction with any other antenna or Camera. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or Camera. This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical laptopcomputercongurationandthisdevicecanbeusedindesktoporlaptopcomputers with side mounted USB slots. This device and its antenna must not be co-located or operated in conjunction with any other antenna or Camera.IC STATEMENTOperation of this device is subject to the following two conditions:1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
13WARRANTYMobi Technologies, Inc. warrants this product to be free from defects in mate-rial and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replace-ment of parts or labor for repair. To obtain warranty service, please return the product to Mobi Technologies, Inc. along with a dated sales receipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at the address indicated below and for all associated freightand insurance costs. This warranty does not cover damage caused by accident, misuse,abuse,impropermaintenance,unauthorizedmodication,orconnectionto an improper power supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and any liability other than what is stated above.© 2012 Mobi Technologies, Inc. All Rights Reserved.Mobi Technologies, Inc.5913 Blackwelder StCulver City CA 90232Toll Free Number (877) 662-4462www.getmobi.comPlease register your product at:www.getmobi.com/registerproduct.php
Mobi Technologies, Inc.5913 Blackwelder StCulver City CA 90232Toll Free Number (877) 662-4462www.getmobi.comMobi and Secure Start are registered trademarks of Mobi Technologies, Inc.© 2012 Mobi Technologies, Inc. All Rights Reserved

Navigation menu