Mobi Technologies DW700TX MOBICAM DXR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1397122
Application ID	UfE1lGQZRuxwF3+PfaHTcw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	261.98kB (3274806 bits)
Date Submitted	2010-12-27 00:00:00
Date Available	2010-12-27 00:00:00
Creation Date	2010-12-24 08:24:18
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-12-24 08:24:18
Document Title	untitled
Document Creator	PScript5.dll Version 5.2
Document Author:	GC13

70204
MOBICAM DXR
680
680
130
270
1050
2100
15
PWR.
70204
camera
and Installation
Camera
receiver
Receiver
battery
pairing operation
receiver
camera
camera
receiver
camera
camera
camera
receiver
receiver
camera
camera
receiver
camera
3.5
receiver
camera and receiver
Mounting kit
Press power key to resume receiver image,
please refer to [Power Saving] section at page
12 for details.
Black screen &
Buttons no function
Power save mode on
Audio feedback
Camera and receiver are The camera has a high sensitivity microphone
too close
Keep the camera at least 10 feet away from the
receiver. If the camera must be within 10 feet
of the receiver, keep the volume down
Camera stand
USB cable
VOX Record&Alarm
does not work
VOX Menu set to
“OFF”
Set VOX Sensitivity/VOX Alarm/VOX Record
to ON
14
camera
receiver
receiver
camera
receiver
13
Alarm Setup
Camera
Press
PWR.
DC IN 5V/1A
Lens
IR LED
Link indicator
Power indicator
Battery indicator
Power key
13
DC IN jack
13 Camera stand
to move between the items.
Event List
U SB
Receiver
to shift to on /off. Press
VOX alarm ON: The receiver will give an alarm for 15 seconds when the
camera is triggered by voice.
Battery low alarm ON: The receiver will give an alarm for 15 seconds when
the camera battery is low.
Out of range alarm ON: The receiver will give an alarm for 15 seconds when
the receiver and camera is out of wireless transmitting
range.
Play back Mode
1. Press
to enter Record Folder.
2. Continue to press
Battery
Power
Cursor up Channel switch
Cursor left/ Volume down
Cursor down/ Audio switch
Cursor right/ Volume up
Enter/Exit menu
Record/Delete
PTT button/Confirm
Power button
SD card slot
USB port(For FW upgrade/
AP software connection)
DC IN jack
Reset
Power adaptor
to Play/Pause file.
3. Press to fast forward video clip, press
press ESC to Stop/Exit.
to to back reverse video clip;
Event List
1. Use
to select the record file you need to delete.
2. Press DEL to enter deletion mode.
3. Press
to select YES or NO.
4. Press OK to delete.
3 sec
30 sec
12
VOX Sensitivity
and Installation
Camera Connection
Connect power cable to camera’s DC IN then plug on switching power
supply adapter to wall outlet.
Use
to adjust VOX sensitivity level.
Push [Power Button] once to turn ON the camera.
Built- in Lithium battery charging process starts automatically by plugging
OFF --VOX funtion will be disabled.
level 3 means high sensitivity,level 1 means low sensitivity
in switching power supply. To have full capacity, please charge battery full
until green [Battery Indicator] goes off.
DC IN 5V/1A
VOX Activate Recording
Only use 5V/1A power adaptor provided in the package.
LCD Monitor Connection
Connect power cable to Receiver’s DC IN then plug its on its power
adapter to wall outlet.
Press [Power Button] to turn ON the receiver.
Built-in Lithium battery charging process starts automatically by plugging
in switching power supply. To have full capacity, please charge battery
before operating the receiver without charger for portable use.
System will auto record for 30 sec once camera is triggered by voice when
When [Battery Indicator] lights up red, plugging in power adapter to charge
battery.
Only use 5V/1A power adaptor provided in the package.
set “VOX activate recording” to ON.
Please set VOX sensitivity to level 1~3 before proceed with this function.
Brightness
Select the position for the camera and secure the camera stand.
Screws and anchors are supplied. Use an appropriate screw type
for the mounting surface.
Screw the camera onto the bracket
Adjust camera to the proper view angle. Make sure the lens is upright
relative to your subject. Tighten the nut. Adjust the antenna to an
upright position.
360
Press
to enter camera brightness adjustment bar, press
adjust brightness of current channel.
11
to
Pairing Camera
Step 2: Basic Operation
I. Knowing Camera Function Buttons and Indicators
1. Use
to select a channel.
2. Press
to start system countdown from 60 seconds.
3. Within 60-second countdown, press PAIR at the camera side. Image will
display when pairing is complete.
PWR.
DC IN 5V/1A
Power Saving
[Battery Indicator]
Green LED = Battery Charging; please charge battery until Green LED goes off.
Red LED = Battery Low; Camera is turning OFF in 3-minute time, please plug on swiching
power supply for charging and continuous use.
LED OFF = Battery Fully Charged.
[Link Indicator]
Blinking LED = Pairing sequence is in processing. See [Advanced Operation – Pairing Camera]
section as a guide.
Blue LED = Camera is picked up by the receiver.
LED OFF = Camera is in stand-by mode.
[Power Indicator]
Use
to turn [Power Saving] mode On/Off.
By setting [Power Saving] mode On, both receiver and camera will enter
standby mode after 2-minute idle time and speaker volume will be mute.
Press power key of the receiver to resume monitor and camera .
SD Card Format
LED goes ON when camera is powered ON.
[Power Button]
Push once to power ON the camera. To power OFF the camera, hold button for 2 seconds until
[Power Indicator] goes off.
[Link Key]
Press to pair camera with receiver. See [Advanced Operation –Pairing Camera].
Press
to select No or Yes.
For first time use, it is strongly recommended to format the SD card.
10
Camera On/Off
USB
II. Know Receiver Function Buttons and Indicators
Use
press
to select the camera you need to turn off,
to change ON/OFF status.
Make sure available cameras are set to ON for SCAN or QUAD mode
[Battery Indicator]
Green LED = Battery Charging; please charge battery until Green LED goes off.
Red LED = Battery Low; Camera is turning OFF in 3-minute time, please plug on switching power
Scan Period
supply for charging and continuous use.
LED OFF = Battery Fully Charged.
[Power Indicator]
LED goes ON when camera is powered ON.
LED remains ON while monitor is OFF in [Power Save] Mode.
(Menu Mode) [Cursor UP] / ( View Mode) [Manual Channel Switch ] / (QUAD View Mode) [Hot key CH1]
(Menu Mode) [Cursor Left / Vol-] / (QUAD View Mode) [Hot key CH3]
(Menu Mode) [Cursor DOWN] / (QUAD View Mode) [Hot key CH2] /
(View Mode) [Turn on/off audio]
Press to turn on/off audio when setting VOX sensitivity to OFF.
Use / to change Scan Time interval from OFF / 5 sec / 15 sec / Quad,
press
to confirm the settings.
To leave QUAD display, simply press directional keys to enter
single channel.
(Menu Mode) [Menu / Enter Button]
( View Mode) [ Manual Record ] / ( Menu Mode) [ Delete Record File ]
( View Mode) [ Push to Talk ] / ( Menu Mode) [ Confirm ]
10
= CAM1;
= CAM2;
= CAM3;
= CAM4;
(Menu Mode) [Cursor Right / Vol+] / (QUAD View Mode) [Hot key CH4]
[Power Button]
Push button to power on,then hold it for 2 seconds to power OFF the monitor.
When system enter into power save mode from QUAD, press any key
to resume monitor
Step 3: Advanced Operation
I. Knowing Screen Icons
Time Setting
92;
hi
a. Signal indicator
b. Current display channel indicator
c.
---SD card available
---SD card locked(flashing)
---SD card full(flashing)
---SD card error(flashing)
d. Recording indicator(flashing)
e. VOX (Voice-activation) triggering record ON
f. VOX (Voice-activation) triggering alarm ON
g. Camera battery low indicator
h. Push-to-talk indicator
i. System time
Press OK to enter time setting, use
press
again to save.
to change setting,
Set to Factory Default
Use
to select between No and Yes.
The antenna used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operated in conjunction
with any other antenna or transmitter.
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1)this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
IC NOTE:
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device."

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2010:12:24 08:24:18+08:00
Modify Date                     : 2010:12:24 08:24:18+08:00
Metadata Date                   : 2010:12:24 08:23:56+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 256
Thumbnail Height                : 112
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6490 bytes, use -b option to extract)
Document ID                     : uuid:CB505118F40EE011969FCC2CB8E3AD41
Instance ID                     : uuid:860759a5-1e29-4885-8dff-ac10d2349c3d
Derived From Instance ID        : uuid:35557c0b-d369-4339-ad6f-65a4266da689
Derived From Document ID        : uuid:34c21c45-93a3-4fa7-a238-de592bcc13e1
Derived From Rendition Class    : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 297.038889
Max Page Size H                 : 209.902950
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, TimesNewRomanPSMT
Font Family                     : Arial, Times New Roman
Font Face                       : Regular, Regular
Font Type                       : Open Type, Open Type
Font Version                    : Version 3.00, Version 3.00
Font Composite                  : False, False
Font File Name                  : ARIAL.TTF, TIMES.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 300 C
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 300 C
Swatch Colorant Type            : SPOT
Swatch Colorant Tint            : 100.000000
Swatch Colorant Mode            : CMYK
Swatch Colorant Cyan            : 100.000000
Swatch Colorant Magenta         : 43.921599
Swatch Colorant Yellow          : 0.000000
Swatch Colorant Black           : 0.000000
Format                          : application/postscript
Title                           : untitled
Creator                         : GC13
Page Count                      : 9
Author                          : GC13

EXIF Metadata provided by EXIF.tools