MobiWireS MOBIGO 3G 3G NFC POS User Manual

MobiWire SAS 3G 3G NFC POS

User Manual

1Table of Contents1.Foreword....................................................................22.Getting to know your touch phone.....................53.Starting up the device............................................ 64.Introduce the basic phone function................... 85.Technical Specifications..................................... 146.SAR ..................................................... 16
2ForewordSafetyIn order to ensure the phone is used safely and correctly, pleaseread the precautions below carefully before use.1.1 General precaution·Your phone is only suitable for the battery and chargerapproved by our company or else it may cause the battery toleak, overheat, explode or even catch fire.·Do not knock, vibrate or throw the phone heavily to avoidmalfunction, fire, overheating, explosion or fire.·If there are abnormal phenomena, like temperature rising, colorchange or distortion during the usage, charging or storage of thebattery, please stop using it and replace it with a new battery.·It may burn the skin if liquid in the battery leaks onto skin orclothes. If this happens please flush with plenty of clean waterimmediately and go to a hospital at once.·Please keep the battery away from fire to avoid fire andexplosion if the battery leaks or emits a strange smell.·Do not place expose the battery to moisture or it may causeoverheating, fumes and corrosion.·Do not use or place the battery under direct sunlight, or in hotplaces, it may cause leakage and overheating, thus reducingperformance and shortening the lifespan.·Do not charge the battery for over 24 hours continuously.·Use careful with the earphone maybe possible excessive soundpresure from earphones and headphones can cause hearingloss.1.2 Precaution for the use of charger·Do not cause short circuit to the charger, or it may causeelectric shock, fumes and damage to the charger.·Do not use the charger if the power wire is broken, or it maycause fire and electric shock.·Please remove accumulated dust on the power plug.·Do not put water containers next to the power supply to avoidoverheating, fire, electric shock and malfunction in case theycome into contact.·Do not disassemble or tamper with the charger or it may causepersonal injury, electric shock, fire and the damage of thecharger.·Do not use the charger in places of high humidity, likebathrooms, or it may cause electric shock, fire and damage ofcharger.
3·Do not touch the charger, power cord or power plug with wethands or it can cause electric shock.·Do not put heavy objects on the power cord or change thepower cord or it may cause electric shock and fire.·Please unplug the power socket before cleaning andmaintenance.·Please hold the charger to unplug the socket as pulling thepower cord may damage the power wire and cause electricshock and fire.1.3 Cleaning and maintenance·As the phone, battery and charger are not waterproof, do notuse them in places of high humidity and avoid them being wet byrain.·Please clean the battery and charger with a soft dry cloth.·Never use alcohol, thinner or solutions, like benzene, to wipethe phone.·Dirty sockets can cause poor contact and power down, andeven make recharging unavailable. So, please clean themperiodically.1.4 Common PrecautionMobile Phone:·Please use the phone in an environment with temperaturebetween -20℃- 45℃and humidity of <75%.·Please use the phone far away from regular telephones, TVsets, radio sets and office automation equipment, to avoidaffecting the normal use of these equipments and mobile phone.Battery:·Store the battery in cool and ventilated place without directsunlight.·The battery has a limited lifespan. The usage of battery will beshortened progressively due to frequent charging. Once thebattery is out of use, it means that its lifespan has ended, andyou will need to replace it with an approved new battery.·Do not dispose of old batteries as household waste. Give themto specified disposal places and follow any stipulatedinstructions for disposal.CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACEDBY AN INCORRECT TYPE.DISPOSE OF USED BATTERIESACCORDING TO THE INSTRUCYIONS.Charger:·Do not charge under following conditions:-- places with direct sunlight-- places with ambient temperature less than 0℃or over 40℃,
4wet or dusty places with strong vibrations (it may causemalfunction)-- places near electrical appliances (it may affect the image andsound) like TV set, radio, etc-- Adapter shall be installed near the equipment and shall beeasily accessible. The plug considered as disconnect device ofadapter.
5Getting to know your touch phone
6Starting up the deviceTo remove the back cover·Make sure your device is turned off.·Firmly hold the device with the front panel facing down.·Slide your finger into the groove at the top of the phone andgently pull open the back cover.To install the SIM card·Remove the battery if it is installed.·Locate the SIM card slot, and then insert the SIM card with itsgold contacts facing down and its cut-off corner facing out of thecard slot as shown in the diagram.·Slide the SIM card completely into the slot.To install a memory cardTo have additional storage for your images, videos, music andfiles, you can purchase a memory card and install it in yourdevice.Locate the memory card slot on the upper part of the exposedleft panel.Insert the memory card into the slot with its gold contacts facingdown until it clicks into place.To install the battery1. Align the battery’s exposed copper contacts with the batteryconnectors at the bottom part of the battery compartment.2. Insert the contacts side of the battery first and then gentlypush the battery into place. Replace the back cover.Charging the BatteryNew batteries are shipped partially charged. Before you startusing your device, it is recommended that you install and chargethe battery. Some batteries perform best after several fullcharge/discharge cycles.Note: Only the AC adapter and USB sync cable provided withyour device must be used to charge the device.Connect the USB connector of the AC adapter to the syncconnector on your device, and then plug in the AC adapter to anelectrical outlet to start charging the battery.As the battery is being charged while the device is on, acharging icon appears in the title bar of the Home screen. Afterthe battery has been fully charged, a full battery icon appears inthe title bar of the Home screen.Warning:• Do not remove the battery from the device while you arecharging it using the AC or car adapter.
7•As a safety precaution, the battery stops charging before itoverheatPower on/offTo power off your phone, press & hold POWER. On release, thePhone options menu opens. Select ‘Power off’ and confirm.To power on again, press & hold power
8Introduce the basic phone function1. Switch MainMenu style(1) In default Home screen, slide your fingertip left and rightalong the screen to reveal the more home screen.(2) On Home screen, slide your fingertip up to enter the mainmenu screen, slide your fingertip up and down along thescreen to reveal the more applications.
92. Home screen(1) Read your notificationsWhen you see a notification in the status bar, touch the bar andslide your finger down the screen to open the list of notificationsdisplayed in the sliding window.Ongoing notifications report activities such as call forwardingON, current call status,.Notifications report the arrival of new messages, calendarevents, and alarms. You can clear notifications list by selectingthe icon of ‘Clear’ at the bottom of the notifications window.To open the message, reminder or other notification, you cantouch the items. To close the notifications window, slide yourfinger up the screen.(2) Create Home screen shortcuts and widgets:From the Home screen, long touch the TP and and then click theWIDGETS. Touch&hold to pick up a widget to select a shortcutto some of your saved information (such as a play list), a widget(a clock) for your Home screen.
10(3) Move objects on the Home screen·To move an icon or other item on the Home screen, you mustfirst touch & hold it to enter move mode. The object will magnifywhen it’s ready to be moved.·Without lifting your finger (or you’ll drop out of move mode),drag the object to the new position. To move an item to a sectionof the Home screen not in view, move it to the edge of thescreen and hold it there for a moment. The screen view will shift;position the object and release.3. CameraAll the pictures you can capture or view on your phone arestored on a memory card, which must be installed in your phone.Before you can use the Camera or view pictures in Photos,make sure you have a card installed.
114. GPRS/WLAN networkYour device’s networking capabilities allow you to access theInternet or your corporate network through WLAN, GPRS,EDGE (if available)You can also add and set up a VPN or proxy connection.To use WLAN on your device, you need access to a wirelessaccess pointNote: The availability and range of your device’s WLAN signaldepends on the number, infrastructure, and other objectsthrough which the signal passes.To open the Browser you need to be connected to a network.
125. U-disk storageThis phone supports movable storage, i.e., the U-disk function.When the phone is switched on, you see the icon in the statusbar on the top of the screen when it’s connected to a PC by adata line. Touch the bar and slide your finger down the screen toopen the list of notifications displayed in the sliding window.Select [Android system] and touch [Transfer files] , you can usethe phone as a U-disk.
137. BluetoothThe phone supports Bluetooth(BT) functions, you can establisha wireless connection between the phone with other compatibledevices, and data transmission, you can establish a wirelessconnection between devices in the phone with a distance of upto 10 meters. Bluetooth connection may be interference byobstacles, such as walls or other electronic device.1. Enter the setting menu, Touch the Bluetooth to open thefunction, idle screen will display BT icon in the status bar.2. Open the BT discoverable, and other devices can search thephone.3. Before using the phone as a Bluetooth device, you need topair the phone with the target device as follows:-Sure your phone has Bluetooth-enabled.-Touch "Scan for devices." Bluetooth devices within the range ofthe phone will start scanning.-Touch the device you want to pair, to confirm password tocomplete the pairingYou can use Bluetooth to share the pictures, videos or musicfiles with family and friends
14Technical SpecificationsTechnical SpecificationsWeight: 134.5g(with battery)Dimensions: 147.54*67.81*11.35mmFor the network:GSM850/MHzGSM900MHz/DCS1800MHz/PCS1900MHzBattery Type: Li-ionBattery Voltage：3.8VBattery Capacity:1750mAHstandby time:2G About 364hrs3G About 290hrsBattery Manufacturer: NINGBO VEKEN BATTERY CO., LTDBattery model：178119744Electric core mode：404756PH-1760mAhBattery Time (No prior or separate notice is required for capacitychanges)Note: Actual operating conditions depend on the local networkenvironment, SIM, and user behavior.Warning: Any consequence caused by misuse, abuse, or notfollowing any and all of the above-written suggestions andinstructions shall not hold the producer in any way responsibleto any degree.Announcement: The manufacturer reserves the right to changeor upgrade specifications or software versions without prior orseparate notice. Trade marks mentioned or used in this materialbelong to their respective owners.
15Any Changes or modifications not expressly approved by theparty responsible for compliance could void the user'sauthority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.Note: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician forhelp.
16SARThis device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, includinginterference that may cause undesired operation.FCC ID: QPN-MOBIGOAny changes or modifications not expressly approved by theparty responsible for compliance could void the user's authorityto operate the equipment.NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates uses and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:---Reorient or relocate the receiving antenna.---Increase the separation between the equipment and receiver.---Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.---Consult the dealer or an experienced radio/TV technician forhelp.Body-worn OperationThis device was tested for typical body-worn operations. Tocomply With RF exposure requirements, a minimum separationdistance of 1.0cm must be maintained between the user’s bodyand the handset, including the antenna.
17Specific Absorption Rate (SAR) information:This wireless phone meets the government's requirements forexposure to radio waves. The guidelines are based onstandards that were developed by independent scientificorganizations through periodic and thorough evaluation ofscientific studies. The standards include a substantial safetymargin designed to assure the safety of all persons regardlessof age or health.FCC RF Exposure Information and Statement The SAR limit ofUSA (FCC) is 1.6 W/kg averaged over one gram of tissue.Device types MobiGo has also been tested against this SARlimit. The highest SAR value reported under this standard duringproduct certification when properly worn on the body is 1.291W/kg. This device was tested for typical body-worn operationswith the back of the handset kept 10 mm from the body. Tomaintain compliance with FCC RF exposure requirements, useaccessories that maintain a 10 mm separation distance betweenthe user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not containmetallic components in its assembly. The use of accessoriesthat do not satisfy these requirements may not comply with FCCRF exposure requirements, and should be avoided.

Navigation menu