Mobile Appliance BMWDAS ADAS User Manual
Mobile Appliance, Inc. ADAS
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2998964 |
| Application ID | uZj6bzrYT85VpkMxksAcBQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 153.64kB (1920552 bits) |
| Date Submitted | 2016-05-20 00:00:00 |
| Date Available | 2016-11-16 00:00:00 |
| Creation Date | 2016-04-26 08:21:32 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2016-05-20 10:05:42 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Marco Molino |
Original BMW Accessories Operating Instructions Driver Advice System Sheer Driving Pleasure 5 LANGUAGECODE.EN Driver Advice System Operating Instructions Driver Advice System Operating Instructions Contents General instructions Symbols used Safety instructions Product description BMW Driver Advice System 7 BMW Driver Advice Display 8 BMW Head-Up Screen 9 Installation commissioning 13 Pairing a smartphone with the BMW Driver Advice System 13 Settings 13 Updates 1 5 Operation with an incoming call 15 Technical data 15 BMW Driver Advice Assistant Functions 16 Collision warning 16 Lane departure warning 16 Distance information 17 E.EN Traffic sign recognition 18 Alertness assistant 18 High-beam assistant 19 Disposing of electrical equipment (WEEE Directive) 20 Service 21 Š 2015 BMW AG, Munich/Germany Reprints, even in excerpt form, are permitted only with the written consent of BMW AG, Munich. Printed in Germany on environmentally friendly paper (chlorine-free bleach, recyclable). Subject to printing errors, mistakes and changes. General instructions BMW recommends only using parts and accessories that have been tested and approved by BMW in relation to their safety, function and sustainability. If you have any questions regarding the use of your BMW Driver Advice System, please contact your BMW Partner. Please read these operating instructions carefully before using your BMW Driver Advice System. The BMW Driver Advice System is a product that supports driving safety and comfort by displaying important vehicle and navigation information within your range of vision and, if necessary, providing audible warnings. Symbols used Denotes warnings that you must observe. Denotes instructions that draw your attention to special features. Denotes the end of the instruction. Safety instructions Product description The BMW Driver Advice System The BMW Driver Advice System is a displays distance information, product that has a modular structure and collision and lane departure can also be used as such. warnings and assists with traffic sign recognition, wandering attention and the use of high beams. The BMW Driver Advice System does not actively intervene in your vehicle; it merely offers audible and visual The main system comprises a camera and visual display with the associated BMW Driver Advice App. Alternatively, the additional BMW Driver Advice Display or the BMW Head-Up Screen can be purchased for the display. assistance. BMW Driver Advice System The failure of one or more BMW Driver The camera is installed and Advice System assistants will have no connected in the vehicle by the BMW impact on the vehicle's function. dealer. Please do not use your smartphone while driving. To ensure you are not distracted while driving, settings on the BMW Driver Advice System can only The camera is switched on when the ignition is switched on and switched off when the ignition is switched off. be carried out when the vehicle is The camera can also be switched on and off stationary. manually at the press of a button. The status Please note that additional roaming charges may be incurred abroad if you is displayed by the ring-shaped LEDs around the push button. have enabled data roaming on your smartphone. Audio signals A speaker on the camera serves as the various sounds act as information or as E.DE source for the audible signals. The a warning. The BMW Driver Advice System issues warning signals when: â there is a collision warning for objects (at 10 km/h up to 250 km/h) and pedestrians (up to 65 km/h) â there is a lane departure warning (from 70 km/h) â there is a safe distance warning (at 40 km/h up to 250 km/h) The BMW Driver Advice System can also issue information signals for: â Alertness warnings â Recommendations to switch off the high beam headlights Visual signals If you have also purchased the BMW Driver Advice Display in addition to the BMW Driver Advice System, this display can be used to indicate functions. The display can be adjusted by rotating it to the achieve the perfect viewing angle. To do this, The image source in the main system is the BMW Driver Advice App, which can be extended and / or replaced by the BMW Driver Advice Display and BMW Head-Up Screen. The BMW Driver Advice System displays: â Collision warnings for objects (at 10 km/h up to 250 km/h) and pedestrians (up to 65 km/h) â there is a lane departure warning (from 70 km/h) â there is a safe distance warning (at 40 km/h up to 250 km/h) The BMW Driver Advice System can also issue information signals for: â Alertness warnings â Recommendations to switch off the high beam headlights BMW Driver Advice Display 10 release the positioning screw behind the display, move it to the desired position and tighten the screw again. fatigue being detected. The settings for the display are adjusted using the turn-and-push button. To call up the settings, push the button. To select the High beam assistant: the display lights up for 3 seconds in the event a warning. functions, turn it. Pushing the button again activates the highlighted function. The various options are explained in âAbout the Appâ and are identical. The notifications and warnings are (in some cases) represented in colour from GREEN (good), YELLOW (acceptable / dangerous) to RED (critical). Especially critical situations are also emphasised by flashing notifications. Controller for optimising the display position Push-and-turn button for selecting and confirming the relevant functions Collision warning for objects (at 10 km/h up to 250 km/h) and pedestrians (up to 65 km/h): the display lights up red in the event of a hazard for 3 seconds. Lane departure warning for the left and right-hand lane (from 70 km/h): The corresponding lane marking flashes in the event of a hazard. Safe distance information (at 40 km/h up to 250 km/h): the four bars light up green to red, depending on the situation. Alertness assistant: the display lights up for 30 seconds in the event of 11 Display brightness BMW Head-Up Screen The BMW Driver Advice System Displayâs The alternative to the BMW Driver Advice brightness is adjusted automatically System Display is the BMW Head-Up Screen according to the brightness of the dashboard (BMW HUS). If you have purchased this in illumination in the car. It can also be adjusted addition to the BMW Driver Advice System, manually via the dashboard illumination these two products can be linked. controls in the car or in the system settings of The BMW Driver Advice System the complements the functions of the BMW BMW Driver Advice System. Head-Up Screen. Please take care not to set the display so bright that you are dazzled in dark conditions. Cleaning To clean the BMW Driver Advice System Display, we recommend using a soft, dry cloth. Do not use any other types of cleaning agent, since these can damage the product. Procedure for opening up the screen Reset button: The Head-Up Screen can be reset to its factory settings with a paper For more stubborn dirt, we recommend clip. You then simply need to sign back in moistening the cloth with a little water. using the factory WLAN access data NFC (Near Field Communication) contact point: near field communication for the contactless exchange of data via radio technology across short distances of just a few centimetres. On smartphones that support NFC, you can launch the âHead-Up Screenâ App 12 GUAGECODE.EN is an international transmission standard automatically. 13 Functions of the Head-Up Screen and pairing The vehicle data is displayed automatically as soon as the ignition is switched on. All other data is displayed as soon as navigation begins. The following system requirements are necessary to use the smartphone functions: â iPhone 5S or later (BT 4.0 Bluetooth Low Energy required) â Android 4.4 or later (BT 4.0 Bluetooth Low Energy required) On your smartphone, install the free BMW "Head-Up Screen" App. You will find it in your respective App Store: iTunes (iOS) or Google Playstore (Android). Once installation of the âHead-up Screenâ App is complete, you must connect your smartphone to the Head-Up Screen (WLAN). Switch your car's ignition on and fold the screen of the Head-Up Screen upwards. Under "WLAN" settings in your smartphone, find the WLAN access point with the SSID "Head-Up Screen" and connect to it. The default password is: â1234567890â. A pure WLAN connection will not be displayed; only if the smartphone is communicating with the HUS via a TCP/IP connection also. To do this, the 14 HUS App must be launched and communication with the HUS must be active. If your smartphone does not connect automatically to the Head-Up Screen, switch your smartphone's screen on briefly after you have switched on your car's ignition. Head-Up Screen display 16 Alertness assistant, illuminates for 30 seconds if a break is recommended 17 Speed camera warning 18 Distance information 19 Lane departure and collision warning Torque (Nm) Power (kW) Cruise control including set speed Refuel warning, illuminates for 30 seconds from a range of 50 km or 29 mi Black ice warning, illuminates for 30 seconds at temperatures below 3°C or 37°F Speed limit Distance until the next turning manoeuvre Route and turning instructions Navigation device lane assistant 10 Estimated time of arrival or remaining journey time 11 Distance to destination 12 Delay caused by traffic 13 WLAN connection to the smartphone / navigation device 14 Connection to live services (picture shows example) 15 High-beam headlight assistant, illuminates for 3 seconds if low beam is recommended 15 Settings with the Head-Up Screen App Speed adjustment: Fine-tuning of the speed display in the car. Depending on the vehicle type, it may be necessary to Various settings can be modified using the adapt the digital display on the Head-Up "Head-Up Screen" App (see figure). Screen to the behaviour of the speedometer's analogue pointer display Adapting the brightness of the screen: In âAutoâ mode, your Head-Up Screen adapts to the settings of the car's dashboard illumination. The brightness can also be customised here. Removing the tick next to "Auto" allows the display to be controlled completely independently of the car. Ensure that you are not dazzled in dark conditions: - Changes to the brightness of the HeadUp Screen via the dashboard if the daytime driving light or low beam headlights are switched on). To coordinate the control range for the display brightness as effectively as possible, BMW recommends not setting the dashboard illumination to maximum, but rather to just slightly below it. To control the dashboard illumination, please see the instructions in your BMW Owner's Manual. Please take care not to set the display so bright that you are dazzled in dark conditions - It is possible, if required, to apply the enclosed black rubber film onto the 16 LANGUAGECODE.EN illumination control (will only take effect side of the screen facing the front windscreen and thereby rule out any possible dazzle effect caused by the headlights of oncoming traffic. The film can be removed and re-applied as often as necessary Units: Select your desired setting Switching on/off the Nm, kW display Switching on/off the cruise control display Switching on/off demo mode 17 7 Displaying all LED segments (test mode) WLAN settings: Here you can modify your Head-Up Screen's WLAN settings. For security reasons, we Technical data for the HUS â Transparent OLED display Please note that you must then re-connect â Screen dimensions: 125 mm x 42 mm to the Head-Up Screen. â Light density: Around recommend assigning a new password. Technical data for the HUS 800 cd/m² (max. 1,100 cd/m²) Starting the navigation system â Starting the navigation system manually. It is â possible that your personal settings have been reset to the factory settings following an update to the "Head-Up Screen" App HUS operating temperature If the Head-Up Screen exceeds the permissible operating temperature, your Head-Up Screen will only switch on when the ignition is switched on once the permitted internal temperature has been reached. This may take up to a few minutes under certain circumstances. Cleaning and care of the HUS To clean the Head-Up Screen, we recommend using a soft, dry cloth. A suitable microfibre cloth is included in the supplied package. Do not use any other types of cleaning agent, since these can damage the product. For more stubborn dirt, we recommend moistening the cloth with a little water. 18 Screen transparency: Around 55% (max. 65%) â Operating temperature: -40°C ~ +95°C â Ambient humidity: up to 90% Installation Commissioning The BMW Driver Advice System is activated automatically when the ignition is switched on. As soon as the ignition is switched on, settings can be made to the BMW Driver Advice System while the car is stationary. Pairing a smartphone with the BMW Driver Advice System Once the BMW Driver Advice System App has been installed successfully, you must pair your smartphone with the BMW Driver Advice System via Bluetooth. Switch your vehicle's ignition on. Enable âBluetoothâ on your smartphone and launch the BMW Driver Advice System The following system requirements are necessary to use the smartphone functions: â to the BMW Driver Advice System iPhone 5S or later (BT 4.0 - automatically, click on âBMW DASâ in the Bluetooth Low Energy required) list. You will then see the start screen. Android 4.4 or later (BT 4.0 Bluetooth Low Energy required) Settings Install the free BMW Driver Advice The settings can be made via the BMW Driver System App on your smartphone Advice System App and via the BMW Driver You will find it in the appropriate App Advice System Display. Store: iTunes (iOS) or Google Playstore (Android). 19 NGUAGECODE.EN â App. If your smartphone does not connect About the App The Settings selector button on the left-hand side takes you to the Settings level for the individual functions. For all functions (other than traffic sign recognition), the warning sound can be switched ON or OFF by placing a tick next to it. - Collision warning: Select the level of sensitivity you wish to have: EARLY, MEDIUM, LATE or OFF â Lane departure warning: Select the level of sensitivity you wish to have: EARLY, MEDIUM, LATE or OFF â Distance warning: ON/OFF â Alertness assistant: ON/OFF â High beam assistant: ON/OFF â 20 System settings: Select your preferred language, adjust the brightness of the screen, restore factory settings 21 About the display Operation with an incoming call The settings for the display are adjusted Please do not use your smartphone using the turn-and-push button. To call up while driving. the settings, push the button. To select the functions, turn it. Pushing the button again activates the highlighted function. The individual options have already been explained in âAbout the Appâ and are identical. If a call comes in, your mobile telephone will automatically switch to the âincoming callâ display. The BMW Driver Advice System App will remain active in the background. Switching to the BMW Driver Advice System â App during the call is only possible Updates through manual intervention and does not occur automatically. When the call is If the firmware is enhanced in the future and an update becomes available, you will receive a message on your smartphone as soon as you finished, your mobile phone automatically switches back to the BMW Driver Advice System App. connect. If you wish to install the update, confirm with âOKâ. This process can take up to Technical data 8 minutes. - Camera: 1/3â 1,280 x 720 p Before an update of the BMW Driver Advice System App is carried out, the smartphone must be set to Flight mode, since otherwise incoming calls would interfere with or interrupt the â Processor: 2 x 500 MHz â Connection: BT 4.0 â Bluetooth Low Energy â Vehicle connection: CAN â Sound output: Buzzer â Operating voltage: 12 V â Operating temperature: -40°C ~ +80°C update. settings have been reset to the factory settings following an update 22 ODE.DE It is possible that your personal to the BMW Driver Advice System App. BMW recommends checking the settings to ensure they are displaying the information and audio signals you want after every update. 23 BMW Driver Advice Assistant functions Collision warning The collision warning function is limited when The collision warning helps to minimise the â visibility is poor (e.g. in poor road risk of collision accidents and reduce the lighting, snow, heavy rain, fog and consequences of accidents. If there is a risk of spray) collision, the driver will be warned in good time â direct sunlight and bright reflections with visible and audible signals. The multifunction camera mounted to the front there is glare from oncoming headlights, â the camera is dirty, damaged or covered windscreen in the area of the rear-view mirror â vehicles are unlit into view and whose distance reduces â there are fast-moving pedestrians significantly. Up to a speed of 65 km/h, â pedestrians are wearing certain clothing can recognise vehicles and objects that cut standing objects and crossing pedestrians are detected. The collision warning is a tool that cannot definitively detect complex traffic situations and may issue a warning too late. As a result, the driver must always be attentive and ready to apply the brakes. If the Assistant issues a warning, the driver must brake or swerve immediately if it is not dangerous to do so. The driver must not rely exclusively on the display, but instead always be aware of his or her surroundings. 24 and objects that hinder detection â there are pedestrians that are concealed by other objects â there are pedestrians whose shape is difficult to discern from the background The assistant may generate false alerts in the following situations: â oncoming traffic â crossing traffic â on bends â at traffic islands Pedestrians are detected based on typical body contours and posture. The collision warning will not react to: â small people (children) â animals â oncoming traffic â crossing traffic and bends Lane departure warning The multi-function camera mounted to the front windscreen in the area of the area of the rear-view mirror monitors the area in front of the car and recognises lane markings. If the vehicle drifts out of the current lane, a warning is sounded. 25 The lane departure warning is a tool that cannot intervene in the vehicle. The driver maintains full responsibility for steering the car, must keep their hands on the wheel at all times and roads. Where road markings and the road structure are poor, or if there are objects on the road, misdetections may occur. In this situation, the lane departure warning may sound an alert inappropriately or, incorrectly, not at all. must adjust the speed and distance from the car in front accordingly. Lane The driver must not rely exclusively on the departure warning cannot take display, but instead always be aware of his or account of road and weather her surroundings. conditions and cannot always assess traffic situations correctly. The driver must adjust their driving style independently. The driver must not rely exclusively on the display, but instead always be aware of his or her surroundings. To ensure the function of the lane departure warning, â the area around the camera must be kept clean â the cameraâs line of sight must be kept clear â the front windscreen in the area of the camera must be regularly checked for damage. The lane departure warning cannot recognise all road markings and has only been developed for driving on asphalted 26 The lane departure warning accident. â â visibility is poor (e.g. in poor The multi-function camera mounted on the road lighting, snow, heavy front windscreen in the area of the rear-view rain, fog and spray) mirror can detect the vehicle in front from a there is glare from oncoming speed of 40 km/h if the distance is too short headlights, direct sunlight over a period of several seconds. The and bright reflections â assistant provides optical information about the camera is dirty, damaged or covered â LANGUAGECODE.DE function is limited when the current distance to the vehicle in front, prompting the driver to adjust their distance. there are no, multiple or unclear road markings In critical situations, it also emits a signal (if activated) to warn the driver to brake the car â there are tight bends â there are alternating lane immediately or to swerve if the situation markings (e.g.: diversions allows it. and crossroads) There is no warning â when the indicators are used Distance information The distance information helps to maintain a suitable distance from the vehicle in front and warns the driver if they are getting too close. The distance minimises the information risk of accident and reduces the consequences of an 27 The distance information is a tool â to people or animals but should not be relied on â to oncoming traffic exclusively. The driver must â to crossing traffic monitor their surroundings at all â on bends times and adjust their distance independently. The assistant will not intervene in the vehicle. It is the driver's responsibility to maintain a safe distance from other vehicles. The sensitivity of the distance information depends on the environmental and weather conditions. In heavy rain and snow, as well as in low temperatures and darkness, the assistant is more sensitive and recommends maintaining a greater distance. The distance information function is limited when â visibility is poor (e.g. in poor road lighting, snow, heavy rain, fog and spray) â there is glare from oncoming headlights, direct sunlight and bright reflections â the camera is dirty, damaged or covered The distance information does not react: 28 In complex traffic situations, the distance information may â issue a warning although there is no danger â not issue a warning although there is a danger Traffic sign recognition Traffic sign recognition displays the maximum permitted speed and when overtaking is prohibited. â there is inadequate lighting of road signs â there are signs with multiple meanings (e.g. on construction sites) Alertness assistant Traffic sign recognition is a tool that may recognise traffic signs The alertness assistant helps the driver incorrectly. The traffic signs on on long, tedious journeys, the roads always take priority if especially when driving on the motorway. The there is a discrepancy with the assistant analyses the driving behaviour, display and must be observed at journey length and time of day to offer all times. recommendations about taking regular breaks. The driver must not rely A warning is issued via a symbol on the display exclusively on the display, but and possibly with a warning sound. instead always be aware of his or her surroundings and interpret traffic signs independently. The road sign recognition function is limited when â visibility is poor (e.g. in poor road lighting, snow, heavy rain, fog and spray) â there is glare from oncoming headlights, direct sunlight and bright reflections â the camera is dirty, damaged or covered â the road signs are difficult to read 29 The alertness assistant is merely a High beam assistant tool and cannot (always) detect signs of illness, form on the day or The high beam assistant recommends the tiredness. The driver is solely timely lowering of high beams when there is responsible for taking suitable breaks. oncoming traffic. The multi-function camera The assistant's algorithm is designed mounted to the front windscreen in the area of exclusively for journeys on well- the rear-view mirror can recognise oncoming asphalted roads, as well as on vehicles and vehicles in front of the car and motorways. measures the distance from them. This means that a recommendation to lower the high beams The assistantâs function is limited when can be issued in good time so that the oncoming traffic is not dazzled. The assistant â driving for less than 60 minutes also recommends lowering the high beam in â driving in a sporty style well-lit areas, such as towns or cities. â speeds are maintained below 60 km/h and over 200 km/h â the driver is very distracted The high beam assistant is only active when the high beams are switched on. The alertness assistant is unable to detect momentary nodding-off. The high beams do not react to: The alertness assistant detects a break if â the engine is switched off for a â unlit road users (pedestrians) â poorly-lit road users (cyclists) â road users whose lighting is concealed (crash barrier, narrow bends) period of more than 15 minutes The high beam assistant is a tool reset to zero and restarts the analysis. that offers recommendations on how to use the headlights. In rare cases, other road users who have their own lighting will not be recognised and 30 ECODE.EN When a break is detected, the assistant is the lowering of the high beams will not be (expressly) recommended. There is a risk of accident! Correct vehicle lighting is the responsibility of the driver, who should not rely solely on the display but is instead obliged to make his or her own assessment of the lighting, visibility and traffic situations. 31 Disposing of electronic equipment (WEEE Directive) The high beam assistantâs function is limited when â visibility is poor (e.g.: in snow, heavy rain, fog and spray) â there are bright reflections â the camera is dirty, damaged or covered This symbol on the product or packaging indicates that the the product must not be disposed of in household waste. In agreement with the EU Directive 2002/96/EC on electrical and electronic waste (WEEE), this electrical device must not be disposed of as unsorted domestic refuse. Dispose of this product by returning it to the place you bought it, or to a local authority recycling facility near you. 32 6HUYLFH )RUPRUHLQIRUPDWLRQRULI\RXKDYHDQ\ TXHVWLRQVDERXWXVLQJ\RXU%0:'ULYHU $GYLFH6\VWHPSOHDVHFRQWDFW\RXU%0: /$1*8$*(&2'(( (1 3DUWQHU
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Marco Molino Create Date : 2016:04:26 08:21:32+02:00 Modify Date : 2016:05:20 10:05:42+09:00 Has XFA : No Language : de-DE Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Marco Molino Creator Tool : Microsoft® Word 2010 Metadata Date : 2016:05:20 10:05:42+09:00 Producer : Microsoft® Word 2010 Document ID : uuid:07c37c3c-a751-4085-aef5-99af21c48aeb Instance ID : uuid:96155a45-1798-4f0d-8b7a-1c4392132775 Page Count : 33EXIF Metadata provided by EXIF.tools