Mobile Appliance CONN Connectivity Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3757053
Application ID	icT1KVdwqRgkS0m+UIr0bw==
Document Description	User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.49kB (2143616 bits)
Date Submitted	2018-02-20 00:00:00
Date Available	2018-08-19 00:00:00
Creation Date	2018-02-08 10:12:42
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-02-08 10:27:16
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	박영준

User Manual
Copyright ⓒ 2018. Lab-T, Inc.
Connectivity
Operation Manual
General information
An operation manual is supplied with this unit.
This includes key instructions on safety, use and disposal.
Real all operating and safety instructions before using the machine.
Use the unit only within the specified range of use as described.
When you deliver your device to a third party, please bring all documents together.
BMW recommends that you only use parts and accessories inspected and approved
by BMW for safety, functionality and durability.
Safety instructions
Do not operate while driving.
For your safety, observe all other safety instructions. Legal regulations must always be observed.
In principle, videos with Connectivity marks should not be made public on the Internet or other sources.
AS
If the Connectivity fails, contact an authorized BMW dealer.
Wash
Only clean the Connectivity with a damp cloth.
Be careful not to get any water on the connector.
Disposal of electrical equipment
If you can no longer use the appliance, do not dispose of it as household waste for environmental protection,
but dispose it at a professional waste disposal company.
In accordance with the European Regulations for the disposal of electrical and electronic equipment, 2012/19 /EC
and applicable national laws, old electrical equipment must be collected separately and disposed of in an
environmentally friendly manner for recycling.
For disposal of old equipment, please contact your local government office.
Intro & Main
No.
Content
Check if user want to run App
Check : don’t show this page at
next time
Don’t check : show this page at
next time too.
Stop phone App
If (1) is checked, try to connect to
ACE 2.0
If (1) isn’t checked, stop phone app
Intro & Main
- When the Wi-Fi(ACE)
connection succeeds,
- When the Wi-Fi(ACE)
connection fails,
No.
Content
User can use ACE 2.0 via Wi-Fi
When the connection fails, user can
select ACE’s Wi-Fi SSID
User can see ‘Car Location’ and the
setting value. But user can’t user
other funtion.
Phone App tries to connect ACE
through mobile or
Router(supporting internet) at
remote site. To use this, Phone
should be registered to the server in
advance.
How to prepare connectivity function
Step
1. Turn “BLE” on at the “system settings”
2. Get VPN key
3. Modify account information such as phone number to make ACE send SMS for G-shock events
4. Register cloud information to upload G-shock event file at parking mode
How to prepare connectivity function
Statue : Phone is connected with ACE 2.0 Wi-Fi SSID
Step 1.
Turn “BLE”
on at the
“system
settings”
** This is
required
only one
time
1)Connect to the ACE 2.0
5) Confirm
2) Settings
3) System settings
6) Select your BLE
address
4)Turn BLE ON
7) Success! Go to main
window
8) Press back(“<“) button
How to prepare connectivity function
Statue : Phone is connected with ACE 2.0 Wi-Fi SSID
Step 2.
Get VPN
key
** This is
required
only one
time
1) Press “Unkonw/USER”
button
2) Press “VPN key”
button
3) Confirm
4) Check “VPN : Yes” and
then go to Main Window by
pressing back”<“ button
To use SMS and Cloud upload
Step 3.
Statue : Phone is connected with ACE 2.0 Wi-Fi SSID
Modify account information( when Wi-Fi is connected )
2) Change information
- ID,password : this is required to change
account infromation.
- E-mail : this is required when you forget your
id, pw
- Phone : when high g-shock occurs, SMS will be
sent to this
And then press “Complete” button
3) And then press “Complete” button
1) Press ”Modify” button
Step 4.
Register cloud infromation
This requires internet
connection. So,
- disconnect to ACE2 on
Wifi
- register the new account
to get the authkey of it (if
it takes a little while App
can show popup for
loading)
-if it’s successful,
reconnect to ACE2 on Wifi
1) Press ”Modify”
button
2) Register personal cloud on which
video data will be uploaded
3) Confirm and go to main window
How to use connectivity function
Step 5.
Status : Phone is LTE/3G mode
Remote connection to the ACE 2.0 ( when Wi-Fi is disconnected and 3G/LTE mode on the phone )
1) Disconnect Wi-Fi or
select SSID which
support internet.
2) Select “Remote
Connection” button
It’ll try to connect ACE
2.0 via internet.
Step 6. use
all the
function
such as
“Camera”.
5) User can use all the functions
3) Confirm. User can
see when App have
to use mobile data
4) Remote connection :
success
Common GUI for
Wi-Fi / 3G mobile connection
Camera / Photo - 1
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Double click
Double click
No.
Content
Change to the Photo mode
Change to the Video mode
List image/Video list
Capture image
Toggle between front and rear camera image
Double click : toggle between full and small screen mode
Go to previous screen
List thumbnail of photo files
Select / Cancel -- play one or multiple files
Note
Camera / Photo -2
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
No.
Content
Show the selected image, address
Upload to the cloud/e-mail/SNS
Case 1) Wi-Fi : from phone to SNS
Case 2) Mobile : from Linux board to SNS
Remove the selected file
Upload to the cloud
Play or slide show
Remove files on phone
Note
Camera / Video
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
No.
Content
Change to video mode
Start to record
Stop record
Show video file list
Play the selected video file
Play one or multiple files
Download to the phone
Play
Note
Camera / Video
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
No.
Content
Toggle between front and rear camera
Previous file
Play/Plause
Next file
Download from ACE 2.0 to Phone
Make popup disappear
Not
Record
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
No.
Content
Show media file list on ACE
Show media file list on Phone itself
Note
Record/ACE/Driving/Video
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Double click
No
Function
Prev file
Play/Pause
Next file
Download file from ACE to Phone
Play selected files
Select / Cancel -- play one or multiple files
Double click
Record/ACE/Video/Download
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Record/ACE/Driving/Photo
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Content
Select / Cancel -- play one or
multiple files
Download files from ACE to Phone
Play file
“It’ll use mobile data. Do you agree?
,  ”
Note
Files on ACE :
- download (o)
- upload(x)
- delete(x)
Record/Phone/Driving/Videos
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Double click
No
Content
Prev file
Play/Pause
Next file
Upload
Delete file on phone
Play files
Select / Cancel -- play one or
multiple files
Note
Double click
Files on Phone :
- upload(o)
- delete(o)
Record/Phone /Driving/Photos
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
No
Content
Select / Cancel -- play one or multiple files
Upload file
Play file
Delete file
Note
G-sensor / ACE
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Files on ACE :
- download (o)
- upload(x)
- delete(x)
No
Function
Prev file
Play/Pause
Next file
Download file from ACE to Phone
Play selected files
Select / Cancel -- play one or multiple files
G-sensor / Phone
Case 1 : Wi-Fi
Case 2 : 3G mobile or Internet
Files on Phone :
- upload(o)
- delete(o)
No
Content
Prev file
Play/Pause
Next file
Upload
Delete file on phone
Play files
Select / Cancel -- play one or
multiple files
Note
Check “Car Location” data
3 4
No
Content
Note
Front /Rear
MAP
Upload GPS position data as string which is used to show position on MAP
App
Option for only 3G
Button which is used to request current position, front- and rear-capture
image to firmware
Option for only 3G
Toggle button which is used to request current position to firmware.
Start to send current position :
Stop to send current postion :
Option for only 3G
Address
Distance
Settings
Wi-Fi
Record Settings
Settings/
System Settings
Settings/
Information
Settings/
Video Overlay
No.
Content
Update firmware
- ACE 2.0 f/w
- ACE 2.0 uCom f/w
- Linux b/d f/w
- Linux b/d uCom f/w
Reset SSID and Password
Note
File Storage : GUI & SD card folder
Folder
Name
Contents
File Name
DRIVING
Permanent
_D.avi
G-shock
_E.avi
Manual
_H.avi
Radar
_M.avi
G-shock
_E.avi
Manual
_H.avi
At driving
_A.jpg,
_B.jpg
At parking
_C.jpg,
_D.jpg
PARKING
IMAGE
Folder
Name
Contents
Phone
Video
(download)
Photo
(download)
Photo
(captured)
29
Descirption
Communication LED
Power LED
Power Button
Cable to Power
USB Port
Reset Button
Package
- Connectivity Module
- Cable
- Operating manual
Technical data
CPU
800 MHz
Memory
512 MB DDR3
USB
2.0 Port Type A
Wi-Fi & BLE
2.4 GHz
Operating voltage
12V
Operating
temperature
-20 ° C to + 50 ° C
Storage
temperature
-30 ° C to + 80 ° C
RF Specification
WiFi
Supported Protocol and Standard
Frequency Range
Amount of Working channel
Channel Bandwidth
Modulation
Output Power
Bluetooth Low Energy
Supported Protocol and Standard
Frequency Range
Channel Bandwidth
Amount of Working channel
Modulation
Output Power
General
Power Supply
Temperature Range
: IEEE 802.11b, IEEE 802.11g,
IEEE 802.11n
: 2412 MHz ~ 2472MHz
: 1-11 (America)
1-13 (Korea, China, Europe)
: 20MHz, 40MHz
: DSSS / CCK / OFDM
: 10mW / MHz 이하 (Korea)
10 dBm±1 dB (General)
Bluetooth v4.2 Low Energy
2402 MHz ~ 2480 MHz
2 MHz
40 (General)
GFSK
0.1mW 이하 (Korea)
3 dBm ± 0.5 dB (US)
Less than EIRP 20dBm (Europe,China)
: DC 12V
: -20℃ ~ 50℃
INFORMATION OF REGULATIONS
INFORMATION OF REGULATIONS
■ EUROPE
“Direct sunshine or any strong light may cause the loss of recognition of writing.”
This equipment may be operated in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR,
KU, IE, IT, LV, LT, LU, GB, NO, CH, BG, TO ,TR
■ United States
FCC ID: WHBCONN
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
※This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or
transmitter.
A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance
to satisfy the RF exposure requirements.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correc the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
INFORMATION OF REGULATIONS
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
■ South Korea
 KC ID : R-CMM-MAI-CONN
기자재의 명칭: 특정소출력무선기기(무선데이터통신시스템용 무선기기)
모 델명: Connectivity Module
식별부호: R-CMM-MAI-CONN
상호: 모바일 어플라이언스 주식회사
제조자/제조국: 모바일 어플라이언스 주식회사 / 한 국
제조년월: 2018.
※ 사용자 안내문
제작자 및 설치자는 당해 무선설비가 전파혼신 가능성이 있으므로
인명안전 과 관련된 서비스는 할 수 없습니다.
■ RUSSIA
12VDC 0.5A
Manufactured by : Mobile Appliance, Inc. /
Gwanyand-dong-1701~1706, Daerung Techno #15,
401 Simin Daero, Dongan- Gu, Anyang-Si, Gyeonggi-Do Korea
Manufacture Date : 2017.
Country of Origin : South Korea

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 박영준
Title                           : 전자파적합등록(EMI)시험성적서
Create Date                     : 2018:02:08 10:12:42+09:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2018:02:08 10:27:16+09:00
Metadata Date                   : 2018:02:08 10:27:16+09:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:efdb0066-770a-48c6-b5c2-691c83fd3a4e
Instance ID                     : uuid:f1c9f191-d322-4d40-b690-ec623852e072
Page Count                      : 35
Author                          : 박영준

EXIF Metadata provided by EXIF.tools