Mobile Technologies 185-2462 13.56MHz RFID User Manual

Merchandising Technologies Inc. 13.56MHz RFID

User Manual

ENTERPRISE TABLET INSTALLATION GUIDE1MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com MTI P/N 063-1407-00 rev D ©2014 MTI All Rights ReservedOVERVIEWMaterials in Box:4 VHB Strips (Preinstalled)Base Plate RemovalMounting PlateEnterprise Tablet Pro BasePower SupplyAlcohol Wipes (x10)Screws (x4)Hex WrenchAuthorization CardAccess Card (x5)NOTE: The unit will slide to the right as the Security Wrench is turned.
INSTALLATION GUIDE ENTERPRISE TABLET INSTALLATION GUIDE1 2 3Configuration A: Top Mounted1324Configuration B: Wall Mounted2 MTI P/N 063-1407-00 rev D ©2014 MTI All Rights ReservedMTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.comNOTE: The unit will slide to the left as the Security Wrench is turned.Enterprise Tablet LiteEnterprise Tablet Pro
13Case Docked Case Ready For RemovalCase Removed Detecting Card24Remove Case from BaseLED IndicatorsCASE REMOVAL AND LED GUIDE ENTERPRISE TABLET INSTALLATION GUIDE3MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com MTI P/N 063-1407-00 rev D ©2014 MTI All Rights Reserved
ENTERPRISE TABLET INSTALLATION GUIDE1 243ACCESS CARD REGISTRATION4MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com MTI P/N 063-1407-00 rev D ©2014 MTI All Rights ReservedAuthorization CardAccess CardIf no Access Card is detected, the Base will return to normal condition waiting for registered Access Card to unlock the Base. The Base can register a maximum of 5 Access cards. The process will need to be repeated for each card. If a sixth card is registered, the first registered card will be deregistered.IF AUTHORIZATION CARD IS LOST OR STOLEN, CONTACT CUSTOMER SERVICE FOR REPLACEMENT.If the case is removed:If the case is docked:
ENTERPRISE TABLET INSTALLATION GUIDE1526435MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.comACCESS CARD REGISTRATION MTI P/N 063-1407-00 rev D ©2014 MTI All Rights ReservedThe base can register a maximum of 5 Access cards. Example:NOTE: The above grid is a conceptual visual representation of the Electronic Register.Example:Example:If a card is lost or stolen:Then re-register the remaining cards plus the new one ordered through Customer Service.If a sixth card is registered, the first registered card will be deregistered.Example:Example:Take any of the remaining access cards and register it 5 consecutive times:ACCESS005ACCESS004ACCESS003ACCESS002ACCESS001ACCESS005ACCESS004ACCESS003ACCESS002ACCESS001ACCESS006ACCESS005ACCESS004ACCESS002ACCESS001ACCESS006ACCESS005ACCESS004ACCESS003ACCESS002ACCESS001ACCESS001ACCESS001ACCESS001ACCESS001IF AUTHORIZATION CARD IS LOST OR STOLEN, CONTACT CUSTOMER SERVICE FOR REPLACEMENT.
ENTERPRISE TABLET INSTALLATION GUIDE6MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com MTI P/N 063-1407-00 rev D ©2014 MTI All Rights ReservedFCC InformationFederal Communication Commission interference statementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference and 2. this device must accept any interference received, including interference that may cause undesired operationRF Exposure WarningThe equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.You are cautioned that changes or modications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Navigation menu