MobileHelp CBS5-01 Cellular Base Station Gen5.0 User Manual
Integrity Tracking LLC, dba MobileHelp Cellular Base Station Gen5.0
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3747685 |
| Application ID | Ftr8BSwtzhgIlRCYacIAWQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 227.18kB (2839759 bits) |
| Date Submitted | 2018-02-09 00:00:00 |
| Date Available | 2018-08-09 00:00:00 |
| Creation Date | 2018-01-26 14:09:28 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-01-26 14:09:37 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 13.0 (Windows) |
Mobile Medical Alert Systems Help at the touch of a button Cellular Base Station Gen5.0 MHP8003-179D MobileHelp | Complete User Guide MobileHelp Complete User Guide This MobileHelp User Guide includes information covering the 3 most popular MobileHelp Systems: Cellular DUO System Cellular Classic System Solo System Note: Remember to always carry the Mobile Device with you when going outside of your home. MHP8003-179D MobileHelp Customer Service 1-877-827-6207 Cellular DUO System What’s In the Box Cellular Base Station Mobile Device Neck Pendant / Wrist Button Cradle Charger Power Cord Mobile Case Optional Accessories PRESS for HELP Wall Button Fall Button The Fall Button™ and Wall button are optional and at an additional cost. The Fall Button™ has a separate user guide. MHP8003-179D MobileHelp Complete User Guide Cellular Classic System What’s In the Box Cellular Base Station Neck Pendant / Wrist Button Optional Accessories PRESS for HELP Wall Button Fall Button The Fall Button™ and Wall button are optional and at an additional cost. The Fall Button™ has a separate user guide. MHP8003-179D MobileHelp Customer Service 1-877-827-6207 Solo System What’s In the Box Mobile Device Neck Pendant / Wrist Button Cradle Charger Power Cord Mobile Case Optional Accessories PRESS for HELP Wall Button Fall Button The Fall Button™ and Wall button are optional and at an additional cost. The Fall Button™ has a separate user guide. MHP8003-179D MobileHelp Complete User Guide Figure 1 Setup Guide for the MobileHelp Medical Alert System We thank you for choosing a MobileHelp Medical Alert System and welcome you to the MobileHelp family. Congratulations on making a smart choice! If you have any questions during the setup process, please call our support team at 1-877-827-6207 and select the Technical Support option. See last page for hours of operation. MHP8003-179D MobileHelp Customer Service 1-877-827-6207 Cellular Base Station Features (Front) Speaker/Microphone ON/OFF Switch (Back) Signal Strength Indicator Emergency Button Reset Button Volume MHP8003-179C MHP8003-179D MobileHelp Complete User Guide MobileHelp Complete User Guide Test Button Figure 2 Battery Charge Indicator Mobile Device System Features Speaker Emergency Light (red ring) Emergency Help Button ON/OFF Button USB Charging Port Low Battery Cellular Indicator (red) Indicator (green) GPS Indicator (yellow) Figure 3 MHP8003-179D MobileHelp Customer Service 1-877-827-6207 Waterproof Help Buttons Emergency Help Button LED Light Technical Support Use Only Pendant LED Light Fall Button* (optional accessory) Wristband *Fall Button does not detect 100% of falls. If able, users should always push their help button when they need assistance. Fall Button is not intended to replace a caregiver for users dealing with serious health issues. Users should wear the Fall Button on the outside of their clothing to improve accuracy in detecting falls. MHP8003-179D MobileHelp Complete User Guide Please follow these simple steps to get your system set up and tested. Connecting your Base Station Step 1. Select a Location ■■ ■■ ■■ ■■ We recommend you place the Base Station near the center of your home, such as your living room, family room or kitchen area. Place it near an electrical outlet. Do not place any object in front of the Base Station. Do not place near any appliances that make noise. Step 2. Plug in the Power Cord (Please refer to figure 4.) Plug the power cord that is attached to the back of the Base Station into an electrical outlet that is not controlled by a light switch. Figure 4 To avoid accidentally turning off the Base Station, DO NOT plug it into an electrical outlet that is controlled by a light switch. MHP8003-179D 10 MobileHelp Customer Service 1-877-827-6207 Step 3. Turning on your Base Station ■■ ■■ ■■ ■■ ■■ ■■ ■■ Turn on your Base Station using the on/off switch located on the back. The display screen will turn on. If the Base is setup correctly, the Base Station will say “system ready.” The emergency and reset buttons will illuminate. Make sure your Base Station is connected to the cellular network by checking for the signal strength bars on the Display screen. You can use the volume control buttons on the front of the unit at the bottom of the display screen, indicated by the “–” or the “+” sign, to adjust if the voice is too loud or too soft. Within a few minutes of turning on the system, the Cellular Base Station will obtain the date and time from the cellular network and will appear in the display area. You are not able to set the date and time manually. ON/OFF Switch Figure 5 Figure 6 MHP8003-179D MobileHelp Complete User Guide 11 Setting Up Your Mobile Device Step 1. Select a Location ■■ ■■ We recommend you place your Mobile Device in your bedroom or any other place around your home where it can be easily accessible. Place your Mobile Device’s cradle charger near an electrical outlet. Step 2. Connect the Cradle Charger (Please refer to figure 7.) ■■ ■■ Plug the power cord into the slot on the back of the Cradle Charger, making sure that the narrow side is on the bottom. Plug the other end of the power cord into an electrical outlet that is not controlled by a light switch. MHP8003-179D 12 MobileHelp Customer Service 1-877-827-6207 Figure 7 WARNING To prevent electrical shock please keep the system away from wet locations. AVERTISSEMENT Pour éviter le choc électrique, SVP tenir le système éloigné des endroits humides. MHP8003-179D MobileHelp Complete User Guide 13 Step 3. Charge your Mobile Device ■■ ■■ ■■ ■■ Place the Mobile Device in the cradle charger. The yellow light on the front of the cradle charger will illuminate. If it does not, make sure you have placed the Mobile Device correctly in the charger. The Mobile Device will turn on within 10 seconds and then it will take about 60 seconds for the Mobile Device to register with the network. ON/OFF Button The red battery light will come on indicating that the device still needs charging. When the device is fully charged, the red light will turn off. It will take about 3 hours for the device to be fully charged. Figure 8 MHP8003-179D 14 MobileHelp Customer Service 1-877-827-6207 Turning your Mobile Device ON or OFF To turn on your Mobile Device: ■■ ■■ ■■ Option 1: Press the ON/OFF button on the side of the Mobile Device and hold for approximately five seconds. Option 2: Simply place Mobile Device in the cradle charger, assuming the cradle charger is plugged in. All the lights will turn on and the green light will start blinking. This indicates the Mobile Device was successfully turned on. To turn off your Mobile Device: ■■ Press the ON/OFF button and hold for approximately two seconds. All the lights will turn off. This indicates your Mobile Device was successfully turned off. MHP8003-179D MobileHelp Complete User Guide 15 Testing your Cellular Duo System It is important that you test your system at least once a month. ■■ ■■ When you are conducting a test on your Cellular Duo System, always have your Mobile Device nearby. This is because if both devices activate in response to your press of a Neck Pendant or Wrist Button, each device will send an alarm to the Emergency Response Center and you will need to reply to the operator to clear the alarm. You can use the TEST button on your Cellular Base Station to conduct a test without placing a call to the Emergency Response Center by following these steps. -- Press and hold the TEST button on Base Station until it illuminates green. -- You will hear an announcement over the Base Station that will instruct you to press the Emergency button or Pendant. -- Press the Neck Pendant or Wrist Button. -- The Base Station will announce, “Test call sent to emergency response center” and the Mobile Device will respond by either beeping several times or by playing the announcement, depending upon the Mobile Device version. -- If your test was successful, you will hear “thank you for testing your device” from the Base Station and Mobile Device. MHP8003-179D 16 MobileHelp Customer Service 1-877-827-6207 Testing your Cellular Classic System You can use the TEST button on your Cellular Base Station to conduct a test without placing a call to the Emergency Response Center by following these steps: ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ Please test your system on a weekly basis. Before testing your system, please unplug the power from the AC outlet. Press and hold the TEST button on Base Station until it illuminates green. You will hear an announcement over the Base Station that will instruct you to press the Emergency button or Pendant. Press the Neck Pendant or Wrist Button. The Base Station will announce, “Test call sent to emergency response center”. If your test was successful, you will hear “thank you for testing your device” from the Base Station speaker. If your test was not successful, the Base Station will announce “user auto-test failed, please contact Technical Support”. Once you have finished testing, please remember to plug the power back into the AC outlet. MHP8003-179D MobileHelp Complete User Guide 17 Cellular Base Station Voice Guidance If your system includes the Cellular Base Station, your Base Station will have voice announcements. Select announcements are listed below: Event Voice Prompt Notes The Cellular Base Station is powered on System Ready Base Station on/off switch has been turned on, be sure to connect to electric outlet or it will run on battery backup. Both red Emergency and Blue Reset buttons are flashing Power not detected or Power restored (when electricity is reconnected) Check that the Base Station is correctly plugged into an electrical outlet. The battery needs charging Low Battery Check that the Base Station is correctly plugged into an electrical outlet or it will run on battery backup. The emergency call is initiated Call in progress Alarm is being sent to the Emergency Response Center. Call connected Please stand by for operator Respond to the emergency operator’s call over the device speaker. Cellular Base Station receives a fall signal Fall alarm is canceled This will occur for about 20 seconds and will allow you time to Fall Detected - Press and cancel the alarm. During this time, you may press and hold the hold Button to Cancel button on the Fall Button for 5 seconds to cancel the signal. Alarm Canceled Alarm has been canceled. MHP8003-179D 18 MobileHelp Customer Service 1-877-827-6207 Medication Reminders (optional service): ■■ ■■ ■■ ■■ ■■ ■■ At the scheduled time for your Medication Reminder, your Cellular Base Station will announce “Medication Reminder, Please Press Reset to Accept” and the blue reset button will flash. The name of the medication will be displayed on the Cellular Base Station screen just like it was entered in the MobileHelp Connect web portal. The Base Station will make the announcement once a minute for 30 minutes or until reset button is pressed. If you press the “reset” button, the reminder will be recorded as accepted. If you do not press the “reset” button within 30 minutes, the reminder will be recorded as ignored. For complete instructions for Medication Reminders, please log in to MobileHelp Connect and under the “Help” tab, click on “MobileHelp Connect User Guide.” If you have any questions, please call 1-877-827-6207 and select Technical Support. MHP8003-179D MobileHelp Complete User Guide 19 Testing your Solo System For Mobile Device Light Indicator information, please see page 35 ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ Remove the Mobile Device from the cradle charger. Firmly press and hold down the emergency button for two seconds until the red light around the emergency button lights up, then release. The Mobile Device will beep several times or announce, “Call in progress”, depending on the Mobile Device version. An emergency operator will communicate with you through the 2-way speaker on the Mobile Device and ask you if you are okay. Figure 9 Please state clearly to the operator that “THIS IS A TEST.” If you do not explain to the operator that you are testing your unit, EMS will be contacted. Test your Solo System using a Help Button (Please refer to figure 9.) Firmly press your Neck Pendant or Wrist Button one time until you see the button’s red light indicator flash. This indicates that a signal was sent to the Mobile Device. The red ring surrounding the Emergency Button on the Mobile Device will light up and either beep or make an announcement, depending on your Mobile Device version. The charging cradle may also beep in response to the Emergency Button being pressed. Proceed with responding to the emergency operator to clear the alarm. MHP8003-179D 20 MobileHelp Customer Service 1-877-827-6207 Test your Help Buttons (Please refer to figure 10) ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ Firmly press your Wrist Button or Neck Pendant one time The button’s red light will flash, indicating a signal was sent to the Mobile Device. The red ring around the Mobile Device Emergency button will light up. The Mobile Device will beep several times or announce, “CALL IN PROGRESS”, depending on your Mobile Device version. This indicates your alarm is being sent to the central station. An emergency operator will communicate with you through the Mobile Figure 10 Device and ask you if you are okay. Please state clearly to the operator that “THIS IS A TEST.” If you do not explain to the operator that you are testing your unit, emergency help will be contacted. If your help button is not working properly or if the light is blinking rapidly, please call 1-877-827-6207 and select Technical Support. If the LED on your pendant flashes red, the battery is low. Please contact MobileHelp immediately to provide you with a replacement pendant. Note: If you have a SOLO system, both your charging cradle and your Mobile Device will beep after you call for help. Please remember, it is important that you test your system at least once a month. MHP8003-179D MobileHelp Complete User Guide 21 Mobile Device 3.0 Voice Guidance The Mobile Device 3.0 provides voice announcements. Select announcements are listed below: Event Voice Prompt The emergency call is initiated “Call in Progress” The battery is low “Your battery is low, please connect to a power source.” Note: There may be situations where the voice prompts don’t complete the entire phrase when another voice event occurs. In this instance, the latter voice prompt event will cut in and the current voice prompt may be terminated prematurely. Technical Information MobileHelp Model Number FCC Product Code Input Output Current Rating MD3-01 FGS-MD3-3G-01 Internal 3.7 VDC 930 mAh Radio Frequency All devices frequency transmission = 433 MHz MHP8003-179D 22 MobileHelp Customer Service 1-877-827-6207 Fall Detection with Mobile Device 3.0 Voice Guidance If your system includes the Mobile Device 3.0, your Mobile Device will have voice announcements. Select announcements are listed below: Event Optional Fall Button Voice Prompt Notes Mobile Device receives a fall signal “Fall Detected - Press and Hold Button to Cancel” This will occur for about 20 seconds and will allow you time to cancel the alarm. During this time, you may press and hold the button on the Fall Button for 5 seconds to cancel the signal. Fall alarm is canceled Alarm Canceled The signal will then be sent to the monitoring center 20-second window for “Fall Detected - Contacting and an operator will call your Mobile Device and/or cancellation has ended Emergency Response Center” the Base Station to assess your situation and dispatch the appropriate help to you. Technical Information MobileHelp Model Number MD3-01 FCC Product Code FGS-MD3-3G-01 Input Internal Output 3.7 VDC Current Rating 930 mAh IGPFD-01 PXTPFD-01 Internal 3.6 VDC 1200 mAh Radio Frequency All devices frequency transmission = 433 MHz MHP8003-179D MobileHelp Complete User Guide 23 Important Safety Information For All Systems ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ You must always carry the Mobile Device with you when going outside of your home. Keep electrical cords away from heat sources and sharp edges. Keep electrical cords away from areas where someone could trip over them. Use caution when handling electrical cords. Never install electrical cords during a lightning storm. Do not use any attachment or accessory that is not intended for use with this system. Test your system once a month. Do not block the Base Station’s microphone. This will affect your ability to communicate with the emergency response center. During a power outage, the Base Station’s battery backup will last up to 24 hours, after it has been charged for 3 hours. The Wrist Button and/or Neck Pendant are designed to work at an approximate range of 350 feet from the Mobile Device or 600 feet from the Base Station, depending on the size and construction of your home. The Mobile Device is not waterproof. Do not expose to water, rain, extreme humidity, sweat, or other moisture. If the LED on your pendant flashes red, the battery is low. Please contact MobileHelp immediately to provide you with a replacement pendant. MHP8003-179D 24 MobileHelp Customer Service 1-877-827-6207 ■■ ■■ ■■ ■■ ■■ ■■ ■■ The Mobile Device contains sensitive hardware, take care when handling and avoid dropping it. Do not expose the Mobile Device to dust, dirt, sand or food. The Mobile Device battery is designed to last for over 24 hours after it has been charged for 3 hours. The Mobile Device has a GPS receiver that works best when it has an unobstructed view to the sky. Wear your waterproof help button at all times. The help buttons (Neck Pendant, Wrist Button and Fall Detection Button) are waterproof and can be taken with you in the shower. Do not put the Neck Pendant or Wrist Button through the clothes washer or dryer. Do not attempt to dry your button out in the microwave or oven. WARNING Strangulation and choking hazard. The Neck Pendant button lanyard has been designed to break away when tugged. However, the user can still suffer serious personal injury or death if the cord becomes entangled or stuck on objects. AVERTISSEMENT Risque de suffocation ou d’étranglement. La lanière pour bouton pendentif est conçue pour se détacher lorsqu’elle est tirée, cependant, l’utilisateur peut subir une blessure ou la mort si la lanière se mêle ou s’accroche à d’autres objets. MHP8003-179D MobileHelp Complete User Guide 25 Frequently Asked Questions How do I call for help? Press your Neck Pendant, Wrist Button, red emergency button on your Base Station or Mobile Device. Do I need my Mobile Device when I leave my home? Yes. Always take your Mobile Device with you when leaving your home. Wear your Neck Pendant or Wrist Button at all times, both at home and away, so help is never out of reach. What happens if I push the button but I can’t speak? If you are unable to speak or be heard, we will assume it is an emergency and notify Emergency Response on your behalf. We will also notify the personal contacts listed on your profile. If I accidentally set off the alarm, what do I do? If you accidentally set off the alarm, simply notify the emergency operator when they respond that this is a “false alarm.” The operator will disconnect and no further action will be taken. How will an Emergency Response team get into my home? Rescue personnel follow different procedures. In most cases, emergency personnel are authorized to break into your home to help you and cannot be held responsible for any damages caused as a result of gaining entry. MHP8003-179D 26 MobileHelp Customer Service 1-877-827-6207 We recommend that you purchase a MobileHelp “lock box” to safely store your house key. Your lock box code will be stored on your account and given to emergency personnel in order to gain entry to your home without causing damage. If you have your own lock box (not purchased from MobileHelp), please call MobileHelp Customer Service at 1-877-827-6207 to ensure your code is noted on your account. How far away from the Base Station will my help buttons work? Your help buttons are designed to work at an approximate range of 600 feet from the Base Station, depending on the size and construction of your home. What happens if I push my help button but cannot get to the Base Station? If you push your help button, stay where you are. An emergency operator will communicate with you through your Base Station or Mobile Device. Why is the emergency operator having trouble understanding me? The microphones in the Base Station and Mobile Device are very sensitive, and will pick up surrounding noises from your television, radio, wind from ceiling fans, and the like. To increase the quality of the call, look for a quieter area to set up your Base Station or go to a quieter area with your Mobile Device. MHP8003-179D MobileHelp Complete User Guide 27 Why is my help button not activating my Base Station/Mobile Device? Be sure to press the help button once firmly in the center to activate your Base Station and/ or Mobile Device. A small red light below the pendant or wrist button will flash. If the Base Station and/or Mobile Device does not respond, check to ensure that the help button is in range of the Base Station and/or Mobile Device. If you still have issues with your system, please call 1-877-827-6207 and select Technical Support. Is the Mobile Device waterproof? No, the Mobile Device is not waterproof. However, your help buttons (Neck Pendant and Wrist Button) are waterproof and can be taken with you in the shower. What if I move to a different home, or my personal information has changed? Please contact Customer Service at 1-877-827-6207 any time there are any changes to your personal information, including changes to your address and phone number. Just give us a call one week before you move to determine whether the service will be available in your area. What if I spend part of the year in another home? We can transfer your service to your new location. Just give us a call at 1-877-827-6207 and speak with Customer Service one week before you go to determine whether the service will be available at your other home. MHP8003-179D 28 MobileHelp Customer Service 1-877-827-6207 I am going to travel. How should I prepare? Your Mobile Device will work nationwide anywhere there is AT&T cellular coverage. We recommend you call Customer Service at least 2 to 3 days prior to leaving, so we can update our systems with your new location address, emergency contacts, and lock box location. This ensures that if we have to alert emergency responders, they will have all relevant information to assist you without delays. Please remember to bring the following items: Neck Pendant and/or Wrist Button, Mobile Device, Car Charger (if you purchased this additional accessory), Power Cord, and Charger. How do I prepare my device for air travel? Your Mobile Device will need to be turned OFF. Simply hold the on/off button for approximately two seconds until all the lights are turned OFF. Is the lanyard adjustable? There are fixed length magnetic lanyards and adjustable length lanyards. Adjustable lanyard: There are two connectors on the lanyard. One that is cone shaped and one that is pear shaped. There are 2 parts of the lanyard coming out the left side of the cones. Use one hand to hold the cone shaped part, use the other to pull the top string to shorten the lanyard. Do the reverse to tighten the lanyard. Magnetic lanyard: These lanyards are not adjustable and are only available upon request. MHP8003-179D MobileHelp Complete User Guide 29 Can a magnetic lanyard cause interference with a pacemaker or other medical device? If you have a pacemaker or any medical device, consult your manufacturer for information on any possible risk of magnetic interference with the device. Our help buttons do not interfere with pacemakers. Can I replace the neck pendant cord? Yes, it will work with just about any chain or cord, so feel free to use any one of your personal chains or necklaces. However, the risk of choking may increase if you do not use the lanyard provided by MobileHelp. Can I replace the wrist button band? Yes, you may replace the Wrist Button band with a standard watch band of your choice. Can I speak into my help button? No, you can communicate with the monitoring center through your Base Station and/or Mobile Device only. Your help buttons do not have a speaker or microphone. Does the Wrist Button strap contain any latex? No, the strap MobileHelp uses is silicon based with no latex content. MHP8003-179D 30 MobileHelp Customer Service 1-877-827-6207 FDA Statement MobileHelp is an FDA Registered Company. MobileHelp quality system complies with regulation 21CFR 820 of the FDA Current Good Manufacturing Practice. The FDA is the official regulatory agency of all food, dietary supplements, medical devices, cosmetics and veterinary products in the United States. FCC Statement Product FCC ID Base PXTCBS2-01 Pendant VDQIGP-01 Wrist Button VDQIGP-02 FCC ID PXTCBS4-01 VDQIGP-01 VDQIGP-02 FCC ID PXTIGM-02 VDQIGP-01 VDQIGP-02 FCC ID PXTMD3-01 VDQIGP-01 VDQIGP-02 FCC ID PXTCBS5-01 VDQIGP-01 3000mAh This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. MHP8003-179D MobileHelp Complete User Guide 31 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■■ Reorient or relocate the receiving antenna. ■■ Increase the separation between the equipment and receiver. ■■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■■ Consult the dealer or an experienced radio/TV technician for help. 15.21 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) Energy set by the Federal Communication Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. MHP8003-179D 32 MobileHelp Customer Service 1-877-827-6207 Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 1. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. 2. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit répond aux spécifications techniques applicables à l’innovation, Science et Développement économique Canada. Cellular Base Station 2.0 and 4.0 Bluetooth Modem 2400 Mhz to 2483 Mhz This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. MHP8003-179D MobileHelp Complete User Guide 33 Technical Information Models IGM-02 IGBW-01 IGBW-01 IGPFD-01 IGP-01 IGPWS-01 IGPWS-02 IGPWC-01 IGMCA-01 MCC-02 IGP-02 IGPWS-02B IGPWS-02W WMP-01 CBS2-01 CBS2-01 CBS4-01 CBS4-01 MD3-01 IGPFD-01 CBS5-01 CBS5-01 Input Output Internal 115 V Battery Backup Internal Internal Internal Internal 115 V 12 V 115 VAC Internal Internal Internal Internal 115 V Battery Backup 115 V Battery Backup Internal Internal Battery Backup 115V Radio Frequency (RF) 3.7 VDC 5 VDC 4.2 VDC 3.6 VDC 3 VDC 3 VDC 3 VDC 5 VDC 5 VDC 5 VDC 3 VDC 3 VDC 3 VDC 3 VDC 5 VDC 4.2 VDC 5 VDC 4.2 VDC 3.7 VDC 3.6 VDC 4.2 VDC 5 VDC All devices frequency transmission = 433MHZ 34 Current Rating 930 mAh 3000 mA 3000 mAh 1200 mAh 230 mAh 230 mAh 230 mAh 1000 mA 1000 mA 1000 mA 230 mAh 230 mAh 230 mAh 230 mAh 3000 mA 3000 mAh 3000 mA 3000 mAh 930 mAh 1200 mAh 3000 mAh 3000 mAh MHP8003-179D MobileHelp Customer Service 1-877-827-6207 Mobile Device Light Indicator Light Indicator What it Means GREEN Blinking slowly: Device is connected to wireless network. Blinking rapidly: Device is NOT connected to wireless network. YELLOW Blinking: Indicates device is communicating to the GPS satellite. RED Blinking slowly (off charger): Battery is low - you have about one hour of battery left. On while charging: Battery is charging. Off while charging: Battery is fully charged. EMERGENCY LIGHT All lights off On: Indicates you successfully pushed your button and sent an alert to the monitoring center. Device is turned off. MHP8003-179D MobileHelp Complete User Guide 35 MobileHelp® an Integrity Tracking LLC Company Corporate Headquarters Technical Support Sales Customer Service 3701 FAU Blvd., Suite 300 Boca Raton, FL 33431 phone: 561-347-6255 fax: 561-347-6288 web: www.mobilehelp.com phone: 1-800-800-1710 email: sales@mobilehelp.com Emergency Support Available 24/7 via MobileHelp System phone: 1-877-827-6207 Monday - Friday 8am to 8pm EST Saturday and Sunday 9am to 6pm EST Excluding Holidays email: support@mobilehelp.com phone: 1-877-827-6207 Monday - Friday 8am to 8pm EST Saturday 9am to 6pm EST Excluding Holidays email: cs@mobilehelp.com Copyright ©2018 MobileHelp®, an Integrity Tracking LLC Company, All Rights Reserved. MHP8003-179D
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36 Create Date : 2018:01:26 14:09:28-05:00 Metadata Date : 2018:01:26 14:09:37-05:00 Modify Date : 2018:01:26 14:09:37-05:00 Creator Tool : Adobe InDesign CC 13.0 (Windows) Instance ID : uuid:8f4bfa8e-c5c7-4438-94eb-0b8c70f5ce4b Original Document ID : xmp.did:01801174072068118C14D7FE091188CD Document ID : xmp.id:1bbc3bbe-0bc8-9943-b937-be5735cb06bc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0a6dc7b7-6a3e-b040-9e5d-14820bc4723d Derived From Document ID : xmp.did:ab48b21a-41cd-8547-8c35-932a376dec62 Derived From Original Document ID: xmp.did:01801174072068118C14D7FE091188CD Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Windows) History Changed : / History When : 2018:01:26 14:09:28-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 36 Creator : Adobe InDesign CC 13.0 (Windows)EXIF Metadata provided by EXIF.tools