Modular Mining Systems 301582 Spread Spectrum Transceiver User Manual d0170002

Download:
Mirror Download [FCC.gov]
Document ID	157908
Application ID	g7ZNTvd4EDcIWuqb7q+6aQ==
Document Description	MPE Statement for manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	0.29kB (3683 bits)
Date Submitted	2001-07-03 00:00:00
Date Available	2001-07-05 00:00:00
Creation Date	2001-07-03 14:55:32
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-07-03 14:55:41
Document Title	d0170002
Document Creator	Microsoft Word 9.0
Document Author:	MF/cvr

FCC ID: FJ6-301582
(The following will be placed in the Instruction Manual)
MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS & USERS
Use only manufacturer or dealer supplied antenna.
Antenna Minimum Safe Distance: 20 cm .
Antenna Gain: zero dBd referenced to a dipole.
The Federal Communications Commission has adopted a safety standard
for human exposure to RF (Radio Frequency) energy which is below
the OSHA (Occupational Safety and Health Act) limits.
Antenna Mounting: The antenna supplied by the manufacturer or
radio dealer must not be mounted at a location such that during
radio transmission, any person or persons can come closer than the
above indicated minimum safe distance to the antenna i.e. 20 cm .
To comply with current FCC RF Exposure limits, the antenna must be
installed at or exceeding the minimum safe distance shown above,
and in accordance with the requirements of the antenna manufacturer
or supplier.
Base Station Installation: The antenna should be fixed-mounted on
an outdoor permanent structure. RF Exposure compliance must be
addressed at the time of installation.
Antenna Substitution: Do not substitute any antenna for the one
supplied or recommended by the manufacturer or radio dealer. You
may be exposing person or persons to harmful radio frequency
radiation. You may contact your radio dealer or the manufacturer
for further instructions.
WARNING: Maintain a separation distance from the antenna to a
person(s) of at least 20 cm .
You, as the qualified end-user of this radio device must control
the exposure conditions of bystanders to ensure the minimum
separation distance (above) is maintained between the antenna and
nearby persons for satisfying RF Exposure compliance. The
operation of this transmitter must satisfy the requirements of
Occupational/Controlled Exposure Environment, for work-related use.
transmit only when person(s) are at least the minimum distance from
the properly installed, externally mounted antenna.
MFA p0130004, d0170002

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : Microsoft Word 9.0
Modify Date                     : 2001:07:03 14:55:41-07:00
Subject                         : p0130004
Create Date                     : 2001:07:03 14:55:32
Title                           : d0170002
Author                          : MF/cvr
Page Count                      : 1
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools