Molex CVS Dabendorf USA-MMC-DC Compenser USA-MMC-DC User Manual BA DC 070706
Novero Dabendorf GmbH Compenser USA-MMC-DC BA DC 070706
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 812712 |
| Application ID | mX3hwJumQ3bkAijoPMWwBg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 1.7kB (21274 bits) |
| Date Submitted | 2007-07-06 00:00:00 |
| Date Available | 2007-07-06 00:00:00 |
| Creation Date | 2007-07-06 11:04:57 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2007-07-06 11:04:57 |
| Document Title | Microsoft Word - BA_DC_070706.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Pursche |
Funkwerk Dabendorf GmbH Maerkische Strasse D-15806 Dabendorf Germany FCC ID: RK7USA-MMC-DC IC: 4774A-USAMMCDC 850 / 1900 MHz DUAL BAND COMPENSER MODEL USA-MMC-DC 205 0111 1 USER MANUAL GENERAL The 850 / 1900 MHz Dual Band Compenser model USA-MMC-DC 205 0111 1 is a bi-directional, dual band RF amplifier used in conjunction with either a dual band or a standard single band mobile phone. It’s designed to compensate for signal attenuation in both transmit and receive paths due to cable losses employed in automotive OEM installations. This helps to improve call quality in weak coverage areas and reduce dropped calls in between cell sites. The Compenser is designed for digital (GSM/GPRS, W-CDMA, EDGE and CDMA) modes. WARNING The Compenser must NOT be used for TDMA and/or the analog (AMPS) mode! STATEMENT according to FCC rules CFR, Title 47, Part 15, Section 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Page 1 of 4 pages Funkwerk Dabendorf GmbH Maerkische Strasse D-15806 Dabendorf Germany FCC ID: RK7USA-MMC-DC IC: 4774A-USAMMCDC INSTALLATION To meet the FCC’s and IC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user or nearby persons and the antenna. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING All installations are done at the OEM factory. No end-user installation or accessible part is involved. Any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void user’s authority to operate this equipment. I/O CONNECTION Mobile port: FAKRA RF type connector, cod. D, female Antenna port: FAKRA RF type connector, cod. D, male DC input and On/Off control: 4-pin automotive connector SPECIFICATIONS FCC ID RK7USA-MMC-DC FCC Rule Parts 22H & 24E IC Certification Number 4774A-USAMMCDC IC Radio Standards Specification RSS-129 for 850MHz CDMA RSS-132 for 850MHz GSM/GPRS, EDGE and W-CDMA RSS-133 for 1900MHz GSM/GPRS, EDGE, W-CDMA and CDMA Operating Frequency Uplink (Tx) 824 … 849 MHz 1850 … 1910 MHz Downlink (Rx) 869 … 894 MHz 1930 … 1990 MHz Page 2 of 4 pages Funkwerk Dabendorf GmbH Maerkische Strasse D-15806 Dabendorf Germany FCC ID: RK7USA-MMC-DC IC: 4774A-USAMMCDC Mode of Transmission Digital Data Source External Type of Modulation GSM/GPRS, W-CDMA, EDGE, CDMA (digital) Type of Information Telephony & Data Input and Output Impedance 50 Ohms Harmonics & Spurious according to FCC and IC specifications Stability Any RF load condition DC Supply Voltage 10.8 … 15.6 V Current Draw (switched off) I OFF ≤ 0.1 mA Current Draw (quiescent) 140 mA ≤ I Q ≤ 220 mA Current Draw (peak) I p ≤ 2.0 A Operating Temperature: -20 … 55 C (-4 … 131 °F) Storage Temperature: -40 … 90 C (-40 … 194 °F) Maximum Output Power: Modulation Type Frequency Range /MHz Emission Designator max. Output Power max. Output Power /Watts /dBm GSM/GPRS 824.2 … 848.8 244KGXW 1.384 31.41 1850.2 … 1909.8 245KGXW 0.908 29.58 826.6 … 846.4 4M18F9W 0.428 26.31 1852.6 … 1907.4 4M15F9W 0.590 27.71 824.2 … 848.8 245KG7W 1.820 32.6 1850.2 … 1909.8 245KG7W 0.951 29.78 824.7 … 848.31 1M27F9W 0.855 29.32 1851.25 … 1908.75 1M29F9W 0.769 28.86 W-CDMA EDGE CDMA Table 1: Maximum Output Power Power Output listed in Table 1 is conducted. Page 3 of 4 pages Funkwerk Dabendorf GmbH Maerkische Strasse D-15806 Dabendorf Germany FCC ID: RK7USA-MMC-DC IC: 4774A-USAMMCDC The antenna installation and operating configurations of this Compenser, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of FCC Rules CFR (Code of Federal Regulations) Title 47, Part 2, §2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Page 4 of 4 pages
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:847c335a-69a8-4a1d-9f3e-02391ffee161 Producer : Acrobat Distiller 6.0.1 (Windows) Create Date : 2007:07:06 11:04:57+02:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:07:06 11:04:57+02:00 Document ID : uuid:08785bb2-b869-43ce-bd02-6be9120f1239 Format : application/pdf Creator : Pursche Title : Microsoft Word - BA_DC_070706.doc Author : PurscheEXIF Metadata provided by EXIF.tools