User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1771050 |
| Application ID | SqsRIZvz/fS0HSFIP2WFhQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 124.77kB (1559647 bits) |
| Date Submitted | 2012-08-21 00:00:00 |
| Date Available | 2012-08-21 00:00:00 |
| Creation Date | 2012-08-13 19:30:04 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2012-08-13 19:30:04 |
| Document Title | Microsoft Word - 20319.fm2000Manual.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | MYHOME |
(Model:FM2000M) 1/13 Contents 1. Direction before Use 1.1. Direction for safety usage 1.2. Product packing and contents 1.3. Parts name and function 1.4. Fingerprint identification process 2. Product Specifications and Function 2.1. Specification 2.2. Function Buttons 2.3. Voice Work 3. Manager Registeration and Change 3.1. Master Fingerprint Regiateration 3.2. Master Card Registeration 3.3. Chaing Master Fingerprint 3.4. Chaing Master Card 4. User Management 4.1. User Registeration 4.2. User Deletion 4.3. All User Deletion 5. Entrance/Exit Setup 5.1. Access Mode 5.2. Set how to recognize 6. Product initialization and Reset 6.1. Product initialization 6.2. Product resetting 7. Product installation 8. Others 8.1. Checking matters before request for A/S 8.2. Terminology explanation 2/13 1 Direction beffore Usiing 1. 1.1 Direction for saffety usage ◆ Do not move or reinstall the t system m arbitrarily y. se of arbitrarily movving or ins stalling the e system, the syste em may no ot work orr : In cas be broken dow wn due to o an elec ctrical sho ock or ina adequate connectio on. In this case e, call the operator. ◆ Do not place the equipme ent around d places where high h voltage fflows. ma ay receive e electrical effect du ue to high voltage. : The system ◆ Do not open/clo ose or rep pair the sys stem arbittrarily. : This system is a high-precision electronic product. So, S it can be damag ged if yo ou arbitrariily open/c close or repair it. Ma ake sure to o call the sales com mpany or operator if needed. ct packing g and conttents 1.2 Produc a. fm2000 0 Fingerprin nt Control Unit 1ea b. RF Card d(13.56MH Hz) 2ea c. Accesarries(Conne ector, Screw w and etc) 1ea d. CD(hard dware/softw ware manu ual, pc prog gram) 1ea ** Select Order : AC Power Adap ptor(DC12V V, 2.5~3A) 1.3 Parts name and Function Fiingerprint window (fiingerprint recognition window) Contact poin nt of RF ca ard contact witthin 4cm) (c LED(green, red) F1, F2 functtion button Registration n,Commute e managem ment) (R Speaker (B Beep, Voic ce prompts) Reset button 3/13 1.4 Fingerprint identification process picture1 picture2 ☺ ☺ ☺ ☺ Finger should be kept clean, so that a correct recognition is possible. If the finger is wet, recognition may be impossible. Make sure that there is no alien substance on the fingerprint recognizer. Place the finger correctly at the center of the fingerprint recognizer as shown in. ☺ All fingerprint should be touching the fingerprint recognizer as shown in . 2. Product Specifications and Function 2.1 Specification CPU RAM FLASH(Program & Data) User Registration ARM9 400MHz 32MByte 64MByte 4Fingerprint + 1Card : 5,000Users Card : 50,000 Users Total 55,000 Users Event Log 200,000 Events Communication RS422, Ethernet, Wiegand In/Out 4 Signal Inputs, 1 Relay Output Card Reader 13.56MHz Mifare Audio Speaker System Software Access Control and Time Attendance Operating Environment -20 ~ 50°C / Lower than 90% RH(Non-Condensing) Power Consumption DC 12 ± 3 V 300 mA Sensor Type Optical Sensor 1:1 Verification Time 800 ms 1: 1,000 Identification Time < 1sec Template Size MAX 490Bytes 2.2 Function button and explanation on LED ** This product is designed to work using function buttons and LEDs alone without numeral buttons. For convenient use, read carefully how to work function buttons and LEDs) 4/13 2,2,1 Function button Press F1 2 times and F2 Function to have master finger print registered and once Changed Press each F1 and F2 2 times Function to have master card registered and Changed. Press F2 2 times and F1 once. Press F1+F2+F1 User registration and deletion (F1:ongoing F2:completed) Setting mode of how to access(incoming/outgoing) (F1:Menu change, F2:setting completed and closed) Setting how to recognize Back to original position(initial state) or Cancellation Press F2+F1+F2 Press F1 & F2 at the same time Press F1+fingerprint (or card) After a voice “Attendance” is heard, save the time to work F1 + F2 + fingerprint (or After a voice “Go out” is heard, save the time to go card) out in the office. F2 + F1 + fingerprint (or After a voice “Return to the office” is heard, save the card) time to get back to the office F2 + fingerprint (or card) After a voice “Leave Office” is heard, save time to go home Recognition of registered After a voice “Door opened” is heard, Fingerprint (card) finger print (or card) ID is stored with green LED on F1 & F2 turned on. A sound “Beep” is heard once with red LED on F1 & Unregistered finger print F2 turned On. (card) is authenticated or Unauthenticated Press F1 or F2 key Whenever F1 or F2 is pressed, a voice “beep” is heard once. Setting wrong function A voice “Set back” is heard and back to an original position The product is in an Red LED on F1 & F2 Abnormal condition 2.2.2 LED explanation Alternately flashing F1 & F2 Green light on F1 Green light on F2 Green light on F1 and F2 at The same time Red light on F1 and F2 at The same time Indicates normal standby conditon Indicates Menu change, or Go ahead when F1 is pressed Function setting completed and finished when F2 is pressed. Indicates normal working condition Indicates abnormal working condition 2.3 Operating prompts by voice 한글음성(Korean speech) 관리자에게 문의하세요 다시 설정하세요 닫힘모드입니다 English voice(영어음성) Please contact security manager Reset please Closed mode 5/13 등록되었습니다 등록완료합니다 마스터지문 등록하세요 마스터카드 등록하세요 변경 마스터지문 등록하세요 변경 마스터카드 등록하세요 변경되었습니다 복귀합니다 사용자 등록입니다 사용자 삭제입니다 사용자 전체 삭제입니다 삭제합니까? 삭제되었습니다 삭제완료합니다 열림모드입니다 외출합니다 인증되었습니다 인식방법 설정합니다 일반모드입니다 지문 혹은 카드로 출입합니다 지문등록하세요 지문으로 출입합니다 지문과 카드로 출입합니다 출근합니다 출입모드 설정합니다 출입문이 열렸습니다. 초기화되었습니다. 카드등록하세요 카드로 출입합니다 퇴근합니다 Registered Registration completed Register master fingerprint Register master card Change master fingerprint Change master card Changed Return to office User registration! User deletion! All users deleted Delete? Deleted Deletion completed Open mode Go out Authenticated Please set how to recognize General mode Access via fingerprint or card Regiser fingerprint Access via fingerprint Access via fingerprint and card Attendance Set access mode Door opened Initialized Register card Access via card Leave office 3.Administrator registration and change ** After opening the product package and applying electrical power on the terminal for the first time, register administrator’s master fingerprint and card. Administrator is required to have 4 fingerprints and 1 card registered at the same time. If either only fingerprint or card is registered, an outsider may register for unauthorized use, Thus causing very dangerous situation. 3.1 Master fingerprint registeration Press F1 button twice and F2 button once A voice “Register Master fingerprint!”⇒ Master fingerprint registeration ⇒ A voice “Registered”⇒ 2nd fingerprint registeration ⇒ A voice “Registered”(4 registerations) ⇒ A voice “Registeration completed”⇒ Normal standby state(Green LEDs on F1 and F2 button flicker alternately) 6/13 ** If one made mistake in operation or wants to start again while registeration(master or user) is under way, press F1 & F2 button at the same time, thus putting the terminal in normal standby state(Green LEDs on button and F2 button flicker alternately) ** When registering finerprint(Maste, User), have 1~2 digits registered for 4 finerprints, Therby reducing error in fingerprint registeration. 3.2 Master card registeration Press F1 twice + F2 once A voice “Register master fingerprint”⇒ Card registeration ⇒ A voice “Registered”(1 card registered) ⇒ A voice “Registeration completed” 3.3 Master fingerprint change Press F1 twice + F2 once A voice “Register master fingerprint”⇒ Registered Master Fingerprint(card) authenticated ⇒ A voice“Authenticated”, “Register change in Master fingerprint”⇒ Registration of change in Master fingerprint ⇒ A voice“Registered”⇒ Registration of 2nd change in Master fingerprint ⇒ A voice “Registered”(4 fingerprints registered) ⇒ A voice “Registration completed” 3.4 Mastercard Change Press F1 twice + F2 twice A voice “Register Mastercard”⇒ Registered Mastercard (fingerprint) authenticated ⇒ “Authenticated”and a voice “Register change in Mastercard”⇒ Change in Mastercard registered ⇒ A voice “Registered”and “Registration completed”. 4. User(finger print or card) registration and deletion ** A total of 55,000 users can have fingerprints or cards registered : the first 5,000 users can have both 4 fingerprints and 1 card registered while remaining 50,000 users can have only cards registered. 4.1 User registration 4.1.1.User registration(4 fingerprints & 1 card ) Press F2 twice + F1 once A voice “User registration!”⇒ Touch master fingerprint(card) on Terminal ⇒ A voice “Register fingerprint”⇒ User fingerprint registered ⇒ A voice “Registered”⇒ User fingerprint (2nd) registration ⇒ A voice “registered”(4 fingerprints registered) ⇒ A voice “Register card ⇒ Card registered ⇒ A voice “Registered”⇒ F2 ⇒ A voice “User registration completed” ** When one has only fingerprint registered, press F2 button without card registeration and one wants to register card alone, after a voice “Register fingerprint”is heard, press F1 button to hear a voice “Register card” ** Each user is given one ID of his own which includes 4 fingerprints and 1 card registered. ** A total of 55,000 users can have fingerprints or cards registered : the first 7/13 5,000 users can have both both fingerprints and card, and remaining 50,000 can have only card registered. 4.1.2. User registeration(4 fingerprint only) Press F2 twice + F1 once A voice “User registration”⇒ Master fingerprint(or card) ⇒ A Voices “Authenticated””Register fingerprint”⇒ User A has his Fingerprint registered ⇒ A voice “Registered”⇒ User A’s fingerprint(2nd) registered ⇒ A voice “Registered”(4 fingerprints registered) ⇒ A voice “Register card”⇒ Press F2 ⇒ A voice “Registration completed” ## A voice “Registered”(4 fingerprints registered) ⇒ A “Register card” is heard, press F1, then registration of 2nd user B’s fingerprint is under way ⇒ A voice “Registered”⇒ User B’s fingerprint(2nd) registered ⇒ A voice “Registered”(4 fingerprints registered) ⇒ A voice “Register Card”is heard, press again F1 to go ahead with 3rd users registration and if F2 is pressed, user’s registration is completed. ** When one wants to have fingerprint alone registered, after 4 fingerprints are registered and a voice “Register card”is heard, without having card recognized, press F1 key to go ahead with registration of 2nd user’s fingerprint. Whenever F1 key is pressed, other user’s registrations continue and then, press F2 to complete registration. 4.1.3. User registration(one card only) Press F2 twice + F1 once A voice “User registration!”⇒ Master fingerprint(or card) ⇒ A voices “Authenticated””Register fingerprint”⇒ Press F1 ⇒ A voice “Register card”⇒ A card registered ⇒ A voice “Registered”⇒ Press F2 ⇒ A voice “Registration completed” ## After A card is registered and a voice “Registered”is heard, press F1 key to go ahead with registration of 2nd user and a voice “Register fingerprint”⇒ F1 ⇒ A voice “Register card ⇒ B card registered ⇒ A voice “Registered”is heard and user registrations continue and press F2 to complete registration. 4.2 User deletion Press F2 twice + F1 once A voice “User deletion!” ⇒ master fingerprint(card) authenticated ⇒ A voice “Authenticated” ⇒ registered user fingerprint(or card) ⇒ A voice “Deleted” ⇒ Press F2 ⇒ A voice “deletion completed” ## (When repeting deletion) After a voice “Deleted” is heard, Continue registered card(fingerprint) wanting to be deleted and when a voice “Deleted” is heard, it is deleted and when deletion is completed, press F2. ** When a particular user deletes one of his fingerprints(or 1 card), all of his fingerprints(4) and card registered are deleted. 8/13 4.3 Deletion of all users Press F2 twice + F1 twice A voice “User deletion!” ⇒ Master fingerprint(or card) ⇒ A Voice “Authenticated” ⇒ F1 ⇒ A voices “All users deleted”, ”Delete?” ⇒ F1 ⇒ A voice “Deletion completed” ** If all fingerprints(or card) of users are deleted, master fingerprint(card) remains and be careful that once they are deleted, they cannot be reinstated. 5. Setting how to access 5.1 Access mode setting General mode (registered user’s access) Open mode (Access door remaining open) Closed mode (no access allowed except for adminis -trator) Press F1+F2+F1 ⇒ A voice “Set access mode”⇒ Master fingerprint(or card) ⇒ A voice “Authenticated”⇒ F1 ⇒ A voice “General mode”⇒ F2 ⇒ A voice “Registeration completed, and into normal stanby (greenLED on F1 and F2 flicker alternately) Press F1+F2+F1 ⇒ A voice “Set access mode”⇒ Master fingerprint(or card) ⇒ A voice “Authenticated”⇒ F1 ⇒ A voice “General mode”⇒ F1 ⇒ A voice “Open mode”⇒ F2 ⇒ A voice “Registeration completed” ## At open mode, green LEDs on F1 and F2 flicker alternately, finerprint light is extished and fingerprint/card except function key are not recognized.. Press F1+F2+F1 ⇒ A voice “Set access mode” ⇒ Master fingerprint(or card) ⇒ A voice “Authenticated”⇒ F1 ⇒ A voice “General mode”⇒ F1 ⇒ A voice “Open mode”⇒ F1 ⇒ A voice “Closed mode”⇒ F2 ⇒ A voice “Registeration completed” ## At closed mode, green LEDs on F1 and F2 flicker alternately, finerprint light is extished and fingerprint/card except function key are not recognized ** When the product left factory, access mode was set at general mode. 5.2 Set how to recognize Access via finerprint of card Access via fingerprint only Press F2+F1+F2 ⇒ A voice “Please set how to recognize” ⇒ Master fingerprint(or card) ⇒ A voice “Authenticated” ⇒ F1 ⇒ “Access via card” ⇒ F1 ⇒ A voice “Access via fingerprint” ⇒ F1 ⇒ A voice “Access via fingerprint and card” ⇒ F1 ⇒ A voice “Access via fingerprint or card” ⇒ F2 ⇒ A voice “Registration completed” and into normal standby state(Green LEDs on F1 and F2 flicker alternately) Press F2+F1+F2 ⇒ A voice “Please set how to recognize”⇒ Master fingerprint(or card) ⇒ A voice “Authenticated” ⇒ F1 ⇒ “Access via card” ⇒ F1 ⇒ A voice “Access via fingerprint” ⇒ F2 ⇒ A voice “Registration completed” and into normal standby state(Green LEDs on F1 and F2 flicker alternately) and registered card is not recognized. 9/13 Access via card only Dual recognition via card and fingerprint Press F2+F1+F2 ⇒ A voice “Please set how to recognize” ⇒ Master fingerprint(or card) ⇒ A voice “Authenticated” ⇒ F1 ⇒ “Access via card” ⇒ F2 ⇒ A voice “Registration completed” and into normal standby state(Green LEDs on F1 and F2 flicker alternately) and fingerprint light is extinguished. Press F2+F1+F2 ⇒ A voice “Please set how to recognize”⇒ Master fingerprint(or card) ⇒ A voice “Authenticated” ⇒ F1 ⇒ “Access via card” ⇒ F1 ⇒ A voice “Access via fingerprint” ⇒ F1 ⇒ A voice “Access via fingerprint and card” ⇒ F2 ⇒ A voice “Registration completed” and into normal standby state (Green LEDs on F1 and F2 flicker alternately) ## For access via card and finerprint, have card first recognized and then, have fingerprint recognized. ** When the product left the factory, access mode is set via fingerprint or card. 6. Product initialization and Reset 6.1. Product initialization(Factory mode) When it is necessary to delete registered master fingerprint(card) and all of user registrations to operation problem or reinstallation and the terminal is handled as if it is for the first time, have the product initialized. How to initialize : With DIP Ni. 8 switch at OFF and power switched ON, a voice “Initialized”is heard repeatedly and when FIP No. 8 whitch is put at ON, the terminal will be in a normal standby state. After the terminal is initialized, be sure that DIP Switch is always to be put at ON position. Registration and status of events stored at fingerprint terminal are deleted by Product initialization. Be careful. 6.2. Product resetting(reactivation) If something goes wrong with the product while in operation, press reset switch to Restore it back to normal. Registrations and events stored remain undeleted. 7. Product installation 10/13 7.1. Connection to CN1 Ethernet connect Ethernet line to CN1 7.2. J2 Connection to J2 power and I/O 18 16 14 12 10 17 15 13 11 Power connection : Connect +12V, 0V to No.2pin and No.4 pin irrespective of their respective Polarity. Connection to Wiegand : Connect No.6 pin to Wiegand D0 and connect No.8 pin to Wiegand D1. RS422 connection : TX+(No.12pin), TX-(No.14pin). Rx+(No.16pin), RX(No.18pin) Connection to Relay output : Normal Open(No.1pin), Common(No.3pin), Normal Close(No.5pin) Connection to Sensor : Sensor 0(No.9pin, Exit), sensor1(No.11pin, Door Status), sensor2(No. 13pin), Sensor4(No.15pin) Signal ground : No.7pin, No.10pin, No.17pin 11/13 7.3. FM2000 local Address setting Use SW1No. 1 ~ 5to set Llocal Address If SW1No. 1 ~ 5were set at OFF when leaving factory, local address is No.1 To set address, set SW1 pin No. 1 ~ 5 as shown in below table.. Address 10 11 12 13 14 15 16 7.4. 7.5. No.1 No.2 No.3 No.4 No.5 Address No.1 No.2 No.3 No.4 No.5 OFF ON OFF ON OFF OFF OFF ON ON OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 17 18 19 20 21 OFF ON OFF ON OFF OFF OFF ON ON OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF ON ON ON ON ON ON OFF ON OFF ON OFF ON OFF ON ON OFF OFF ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF OFF OFF OFF 22 23 24 25 26 27 28 ON OFF ON OFF ON OFF ON OFF ON ON OFF OFF ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ON ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON ON ON ON ON OFF OFF OFF OFF 29 30 31 32 OFF ON OFF ON OFF OFF ON ON ON ON ON ON ON ON ON ON ON ON ON ON Enable to output Wiegand Set pin No.6 of SW11 at ON, enabling the terminal to output Wiegand. Where user card is registered, if user is authenticated irrespective of access mode, registered card ID is out put. Where fingerprint alone is registered, if user is authenticated, user ID is output. Where fingerprint is registered in FM2000 terminal. user ID is automatically set sequentially starting with 1. Selecting type of signal input as required SW1 No.7 pin is set at OFF when leaving the factory. Signal is input by normal open. Where signal is input by normal close, change SW1 No.7 pin to ON position. 12/13 8. Others 8.1. Checking matters before request for A/S ¤ Input does not act well or response speed is slow - Check whether there is moisture in finger - Check whether Alien substance is on the surface of fingerprint reader - Check whether fingerprint was input exactly ¤ Fingerprint registration does not act - Confirm fingerprint registration availability - Confirm fingerprint registration method - Confirm state of fingerprint reader 8.2. Terminology explanation ¤ LAN (Local Area Network) : LAN is linked with communication line fewer than 300m, and it means linkage of PC, main frame, workstation. LAN is distance that electric current or radio signal can be passed correctly between computer and LAN is linked high speed communication network established in building of a certain organization so that employees can use computer equipments most effectively ¤ IP address : It is Internet Protocol Address of 32 bits that provided as the concept agreeing with physical network address, on the Internet, to make Routing efficiently ¤ Gateway(GW) : It is a network point that act as entrance which enter other network ¤ Subnet Mask(SM) : Subnet is abbreviated word of "sub-network", it is network that is belonged to certain organization but it means network that can be realized to a part detached apart 13/13 14/13 15/13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:08:13 19:30:04+09:00 Create Date : 2012:08:13 19:30:04+09:00 Format : application/pdf Title : Microsoft Word - 20319.fm2000Manual.docx Creator : MYHOME Document ID : uuid:5eea4c02-33d1-4523-b2d7-7fe3421f38b6 Instance ID : uuid:832da923-6c1a-494b-a9c6-8d8c170023a0 Page Count : 15 Author : MYHOMEEXIF Metadata provided by EXIF.tools