Montana Woodworks Table Double Pedestal

: Montana-Woodworks Table-Double-Pedestal table-double-pedestal montana-woodworks pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

MONTANA WOODWORKS, INC.
Assembly Instructions for Double Pedestal Table
Thank you very much for purchasing our heirloom quality double pedestal table. Should you have any questions or need
to contact sales or support, please do not hesitate to contact our corporate offices at 888.889.3728 or via E-Mail at:
cs@montanawoodworks.com

Before beginning assembly please take a few moments to read the instructions carefully, understanding each step. Likewise please
also ensure that the hardware package contains the items as described here. Note: a ratcheting wrench can be a considerable
timesaver during the assembly process.
Tools Needed:
Parts List:

½ ” Wrench, Phillips Screw Driver

(2) Pedestal Posts

(4) Wooden Legs (4) Top Braces (1) Table Top

2 ¼” x 2 ¼” Top Cross Piece

(1) 2 ¼” x 4 ¾ ” Bottom Cross Piece

(3) 16 ½” Spindles
Hardware List:

(22) 5/16” Course Thread Nuts (22) 5/16” Flat Washers
(4) Leg Levelers

(8) 3” Wood Screws (Phillips)

STEPS: 1. Place pedestal posts upright on the floor. (Hole locations are the same. Either end up works.)
2. Attach 2 wooden legs to each post using 5/16” washers and nuts.
3. Screw Leg Levelers in each leg. Ensure they are completely seated.
4. Build center assembly by inserting the three spindles between top and bottom cross pieces.
5. Taking completed center piece assembled in step 4, insert the threaded studs into each
pedestal posts being careful not to scratch the posts with exposed studs. Secure studs on top
end of pedestal with 5/16” washers and nuts.
6. Carefully turn pedestal assembly over by reaching over pedestal assembly, grasping each
cross piece and gently turn over so that legs are now resting on the floor.
7. Finish fastening center assembly using 5/16” washers and nuts.
8. Attach the four top braces to the pedestal posts ensuring they are even with top of pedestals.
9. Gently place table top face down on clean and padded surface being very careful not to
scratch or dent it. Using technique described in step 6, turn pedestal assembly over carefully
placing it onto the table top, aligning top braces with outline drawn on underside of table
top.
10. Using 3” Phillips head screws, secure the top braces to the table top making certain that the
braces are flush against table top.
11. You are now ready to turn table over. With the assistance of another person, turn table
upright. You may want to place a clean padded surface under the table edge to protect it
from damage.
12. Adjust the four leg levelers on legs so that table is level and does not wobble.

PROUDLY MADE IN THE U.S.A.
*Pine requires a good sealant. We recommend two coats of varnish being applied per manufactures directions. The table may be
stained prior to finishing with varnish.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Derrick
Create Date                     : 2012:02:23 17:40:40-07:00
Modify Date                     : 2012:02:23 17:40:40-07:00
Producer                        : Microsoft® Publisher 2010
Creator                         : Microsoft® Publisher 2010

EXIF Metadata provided by EXIF.tools