Monterey 46AK622 KEYPAD User Manual Manual

Monterey International Corporation KEYPAD Manual

Manual

100/06/14
KEYPAD
K622
FCC ID : FKD46AK622
200/06/14
FEDERAL COMMUNICATIONS COMMISSION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
300/06/14
1. Scope:
The MONTEREY Slim Key PAD K622 is 18/19 keys standard numeric
layout. It is compatible with IBM PC USB and compatible personal
computer.
2. Features:
! Fashion Styling
! 18/19 standard numeric layout
! Microsoft Windows compatible
! IBM PC USB compatible
! Laser engraved printing
! Nice feeling, light touch membrane tactile switches
! Compact low profile
3. Specification:
3.1 Power Requirement
Input Voltage: DC 4.75V to 5.25V
Input Current: 300 mA max.
3.2Cable Connector
PIN SIGNAL
G Ground
D+ VP
D- VM
VVCC
Shield Frame Ground
3.3Contact Resistance : 500 ohm Max.
3.4Insulation Resistance : 100 ohm, 250V DC
3.5Bounce : • 10 MilliSecond

Navigation menu