Monterey 46AK7000 keyboard User Manual MANUAL

Monterey International Corporation keyboard MANUAL

Manual

WARNINGNote: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Notice:(1) A Unshielded-type power cord is required in order to meet FCCemission limits and also to prevent interference to the nearby radioand television reception. It is essential that only the supplied powercord by used.(2) Use only shielded cables to connect I/O devices to this equipment.(3) Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.
K7000 Windows Keyboard 1. Scope:The Monterey K7000 keyboard is 104/105 keys enhancedlayout. Especially with new key support for MicrosoftWindows key. It is also compatible with IBM PC AT orPS/2 and compatible personal computer.2. Features:² Fashion Styling² 104/105 enhanced layout² Microsoft Windows compatible² IBM PC/AT, PS/2 compatible² Laser engraved printing² Multi. Lingual selectable² Nice feeling, light touch membrane tactile switches² Compact low profile
3. Specification:3.1 Electrical Specification3.1.1. Power RequirementInput Voltage: DC 4.75V to 5.25VInput Current: 300 mA max.3.1.2. Cable Connector3.1.2.1 DIN standard 5 pin connector pinassignmentPIN SIGNAL1Clock2Data3Reserve4Ground5VCCShield Frame Ground3.1.2.2 MINI DIN 6 pin connector pin assignmentPIN SIGNAL1Data2Reserve3Ground4VCC5Clock6ReserveShield Frame Ground3.1.3. Contact Resistance : 500 ohm Max.3.1.4. Insulation Resistance : 100 ohm, 250V DC3.1.5. Bounce : ¡Ø 10 MilliSecond

Navigation menu