Mossloo 714134 Wireless Charging Receiver with Micro Tip User Manual

Shenzhen Mossloo Industrial Co.,Ltd Wireless Charging Receiver with Micro Tip

User Manual

1.
2.
INSTALLATION:
Connect the plug to the mobile device’s
charging port.
Once connected, fold and secure the
receiver behind the phone or within the
phone case.
Wireless Charging Receiver
for iOS Phones
Instruction Manual
1 x Wireless Charging Receiver
1 x Instruction Manual
Input: DC 5V/800 mA
Output: DC 5V/800 mA
5-pin tip for iOS phones
Wireless Charging Receiver Area
1.
2.
•
•
Contents:
Features:
Technical Specications
1.
2.
CHARGING:
Place the mobile device directly on top of a
wireless charger, with the symbol side up.
The device will begin to charge.
REMOVAL:
Remove the receiver from the phone case
and unplug it from the charging port.
1.
1.
2.
INSTALLATIE:
Steek de stekker in de oplaadpoort van het
mobiele apparaat.
Eenmaal aangesloten, vouw en bevestig
de receiver achter de telefoon of in het
telefoonhoesje.
Receiver voor draadloos
opladen van iOS-telefoons
Gebruiksaanwijzing
1 x Receiver voor draadloos opladen
1 x gebruiksaanwijzing
Ingang: DC 5V/800 mA
Uitgang: DC 5V/800 mA
5-pin tip voor iOS-telefoons
Receiver-gedeelte voor draadloos opladen
1.
2.
•
•
Inhoud:
Kenmerken:
Technische gegevens
1.
2.
OPLADEN:
Plaats het mobiele apparaat rechtstreeks
op een draadloze oplader, met het symbool
naar boven.
Het opladen van het apparaat wordt
gestart.
VERWIJDEREN:
Verwijder de receiver uit het telefoonhoesje
en haal hem uit de laadpoort.
1.
1.
2.
INSTALLATION:
Stecken Sie den Stecker in den Ladeein-
gang des Mobilgeräts.
Nach dem Einstecken den Ladereceiver
auf die Rückseite des Smartphones biegen
und dort sichern, oder im Telefongehäuse
verstauen.
Drahtlos-Ladereceiver für
iOS-Smartphones
Bedienungsanleitung
1 x Drahtlos-Ladereceiver
1 x Bedienungsanleitung
Eingangsleistung: DC 5 V / 800 mA
Ausgangsleistung: DC 5 V / 800 mA
5-Pin-Stecker für iOS-Smartphones
Empfangsbereich des Drahtlos-Lade-
receivers
1.
2.
•
•
Inhalt:
Funktionen:
Technische Spezikationen
1.
2.
AUFLADEN:
Legen Sie das Mobilgerät direkt auf die
Ladeäche einer drahtlosen Ladestation,
sodass die Seite mit dem Ladesymbol
nach oben zeigt.
Das Gerät beginnt dann mit dem Lade-
vorgang.
ENTFERNEN:
Nehmen Sie den Ladereceiver aus dem
Telefongehäuse und ziehen Sie den
Stecker aus dem Ladeeingang.
1.
1.
2.
INSTALLAZIONE:
Collegate il terminale alla porta di carica
del dispositivo mobile.
Una volta collegato, piegate e ssare il
ricevitore dietro al telefono cellulare o
dentro la custodia.
Ricevitore per Caricamento
Wireless per Telefoni iOS
Manuale di istruzioni
1 Ricevitore per Caricamento Wireless
1 Manuale di istruzioni
Ingresso: CC 5V/800 mA
Uscita: CC 5V/800 mA
Terminale 5-pin per telefoni iOS
Area Ricevitore per Caricamento Wireless
1.
2.
•
•
Contenuto:
Caratteristiche:
Speciche Tecniche:
1.
2.
CARICA:
Posizionate il dispositivo mobile diret-
tamente sul caricatore wireless, con il
simbolo rivolto verso l'alto.
Il dispositivo inizierà a caricarsi.
RIMOZIONE:
Togliete il ricevitore dalla custodia del tele-
fono e scollegatelo dalla porta di carica.
1.
1.
2.
INSTALLATION :
Branchez la che dans le port de charge-
ment de l'appareil portable.
Une fois l'appareil connecté, repliez
et maintenez le capteur à l'arrière du
téléphone ou à l'intérieur de son étui de
protection.
Capteur de chargement sans
l pour téléphones iOS
Mode d'emploi
1 capteur de chargement sans l
1 mode d'emploi
Tension d'entrée : 5 V CC/800 mA
Tension de sortie : 5 V CC/800 mA
Fiche 5 broches pour téléphones iOS
Zone de chargement du capteur sans l
1.
2.
•
•
Contenu :
Caractéristiques :
Caractéristiques techniques
1.
2.
MISE EN CHARGE :
Placez l'appareil portable directement sur
un chargeur sans l, le symbole dirigé
vers le haut.
Le chargement de l'appareil est lancé.
RETRAIT :
Retirez le capteur de l'étui du téléphone et
débranchez-le du port de chargement.
1.
1.
2.
INSTALACIÓN
Conecte el enchufe al puerto de carga del
dispositivo móvil.
Seguidamente, doble el receptor y sujételo
detrás del teléfono o dentro de la carcasa.
Receptor de carga inalámbri-
ca para teléfonos iOS
Manual de instrucciones
1 x Receptor de carga inalámbrica
1 x Manual de instrucciones
Entrada: CC 5 V / 800 mA
Salida: CC 5 V / 800 mA
Punta de 5 pines para teléfonos iOS
Zona del receptor de carga inalámbrica
1.
2.
•
•
Contenido:
Características:
Especicaciones técnicas
1.
2.
CARGA:
Coloque el dispositivo móvil directamente
encima de un cargador inalámbrico, con el
lado que contiene el símbolo hacia arriba,
El dispositivo comenzará a cargarse.
RETIRADA:
Retire el receptor de la carcasa del teléfo-
no y desenchúfelo del puerto de carga.
1.
IMPORTED BY:
PF Concept International B.V.
Kabelweg1
2371| DX Roelofararendsveen, The Netherlands
P.O. Box 175
2370| AD Roelofararendsveen, The Netherlands
Tel: (31) 7133 28911
MADE IN CHINAMADE IN CHINA
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.

Navigation menu